English dropdown-ico

Panasonic HD3700H manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Panasonic HD3700H, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Panasonic HD3700H one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Panasonic HD3700H. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Panasonic HD3700H should contain:
- informations concerning technical data of Panasonic HD3700H
- name of the manufacturer and a year of construction of the Panasonic HD3700H item
- rules of operation, control and maintenance of the Panasonic HD3700H item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Panasonic HD3700H alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Panasonic HD3700H, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Panasonic service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Panasonic HD3700H.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Panasonic HD3700H item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Digital Video Cassette Recorder Operating Instructions (Software) AJ- E P[...]

  • Page 2

    – 2 – Contents Menu screen transitions . . . . . . . . . . . . . . 4 Turning on the power . . . . . . . . . . . . . . . . 7 HOME menu displays . . . . . . . . . . . . . . . 8 HOME menu . . . . . . . . . . . . . . . . . . . . . 13 HOME SET UP menu . . . . . . . . . . . . . . 17 VIDEO IN menu . . . . . . . . . . . . . . . . . . . 22 VIDEO OUT HD [...]

  • Page 3

    – 3 – Contents SET UP menu . . . . . . . . . . . . . . . . . . . 111 INTERFACE SET UP menu . . . . . . . . 112 PANEL SET UP menu . . . . . . . . . . . . . 118 PANEL SET UP (OP MAP REMOTE) menu . . . . . . . . . . . . . . . . . . . . . . . . . 120 PANEL SET UP (OP MAP LOCAL) menu . . . . . . . . . . . . . . . . . . . . . . . . . 123 USER SET UP [...]

  • Page 4

    – 4 – Menu screen transitions HOME F8 HOME SET UP AUDIO IN F6 AUDIO IN PCM INPUT SELECT AUDIO IN CUE INPUT SELECT F7 F8 AUDIO IN SET UP AUDIO OUT F7 AUDIO OUT MONITOR VIDEO IN F7 F7 F10 F9 F9 F10 F1 1 F12 F1 F2 F3 VIDEO OUT CONVERT HD_TO_SD VIDEO OUT CONVERT SD_TO_HD VIDEO OUT CONVERT HD_TO_HD F9 F1 1 F12 F8 VIDEO OUT VIDEO OUT HD VIDEO OUT HD [...]

  • Page 5

    – 5 – Menu screen transitions MUL TI CUE F8 MUL TI CUE SET UP ASSEMBLE ASSEMBLE MANUAL EDIT F8 ASSEMBLE MANUAL EDIT SET UP F12 F12 F1 F2 F3 F4 F5 F6 F7 F10 F1 1 F1 1 F13 F12 HOME SET UP INSERT/ASSEMBLE MANUAL EDIT SET UP INSERT/ASSEMBLE AUTO EDIT SET UP SYSTEM SET UP TC/CHR SET UP AUDIO IN SET UP AUDIO OUT SET UP INTERF ACE SET UP P ANEL SET UP[...]

  • Page 6

    – 6 – Menu screen transitions TEST F2 RF DIAG F2 DIAG MASKED F3 DIAG LAST F3 AUDIO F4 MECHA F5 SYSTEM F6 FRONT F7 F1 F1 SERVO F13 IC CARD F1 USER MUL TI CUE ERROR LOG F2 F1 TEST FRONT P ANEL F2 TEST FRONT KEY CHECK IO F1 F2 SELECT MONITOR MONITOR F3 F3 F2 F3[...]

  • Page 7

    – 7 – Turning on the power Turn on the power. « The HOME menu is displayed. This VTR comes already programmed with menus that correspond to specific operating objectives, and the operations performed on each differ from one menu to another. When a menu is selected using a menu se- lection button, what appears on the display changes, and the fu[...]

  • Page 8

    – 8 – HOME menu displays ∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the format used.) Use this to adjust the level of the input audio signals on the AUDIO IN menu. Alternatively, it is used to adjust the level of the audio playback output signals on the AUDIO OUT menu. Press the L/R button[...]

  • Page 9

    – 9 – HOME menu displays REF : This indicates the status of the output reference signal which has been selected by the VTR. HD REF59: HD REF with a field frequency of 59.94 Hz is selected. HD REF47: HD REF with a field frequency of 47.96 Hz is selected. HD REF48: HD REF with a field frequency of 48.00 Hz is selected. HD REF50: HD REF with a fie[...]

  • Page 10

    – 10 – HOME menu displays ∑ Setting mode display area The displays appearing in this area indicate the modes which have been set. CUT: Appears when the audio cut editing mode is set. XFADE: Appears when the audio cross-fade editing mode is set. VFADE: Appears when the audio V fade editing mode is set. INTRP: Appears when the time code interpo[...]

  • Page 11

    – 11 – HOME menu displays ∑ Setting the initial value for the time code (1) Press the center cursor key. The display now appears in reverse video. (2) Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number key to input the value. To set a letter from A to F in the initial value of the[...]

  • Page 12

    – 12 – HOME menu displays ∑ Setting and checking the cue time (1) Press the center cursor key. The time code display now appears in reverse video. (2) Press the [ 4 ] cursor key. The cue time now appears in reverse video. (3) Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number keys[...]

  • Page 13

    – 13 – HOME menu This menu is displayed by pressing the following key: HOME [4] : Cassette tape in the 4-channel audio format. [8] : Cassette tape in the 8-channel audio format. (This display indicates the C bit pin position of the cassette tape.) If system format does not matched with the C bit pin position of the cassette tape, 4 or 8 display[...]

  • Page 14

    – 14 – HOME menu Key F1 F2 F3 F4 F5 F6 F7 Key designation OUTPUT For selecting the audio/video output signals. FREEZE For outputtting the flash freeze frame. EJT CTL For CTL operation in EJECT mode. TC/CTL For timer mode switching. TC/UB For switching the display between the TC and UB values. TC CLR For clearing the TC value. (TCG CLR) For clea[...]

  • Page 15

    – 15 – HOME menu Key F8 F9 – F10 F11 F12 F13 Key designation SET UP —— PREAD A ° For setting audio pre-read to ON or OFF (SD mode only) PREAD V ° For setting video pre-read to ON or OFF (SD mode only). REC INH For setting the record inhibit mode. Description Transfers the VTR to the HOME SET UP menu screen. This is used during insert ed[...]

  • Page 16

    – 16 – HOME menu ∑ Pre-read editing (1) Set the pre-read function to ON by pressing the F key and F11 key (PREAD A) or F12 key (PREAD V) together. (2) Perform the connections for pre-read editing as shown in the figure below. (3) Proceed with pre-read editing in the desired insert editing mode. (4) Restore the original connections upon comple[...]

  • Page 17

    – 17 – HOME SET UP menu This menu is displayed by pressing the following keys: ) OR ) F1 SET UP F8 HOME F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 18

    – 18 – HOME SET UP menu Key F1 F2 F3 F4 F5 F6 F7 F8 Key designation SYNC PLY Sync play. AT PLY For switching the playback picture in JOG/VAR. PRG PLAY Program play. PRG PLAY Program play. CAP LOCK ° 3 For setting the capstan servo lock TAPE MD. Tape mode when the VTR is in standby OFF. —— EXIT Description Automatically compensates for the [...]

  • Page 19

    – 19 – HOME SET UP menu Key F9 – F10 F11 F12 F13 Key designation —— PREROLL For selecting the preroll time. STILL For setting the STOP/STILL (static frame) mode holding time. STBY OFF For setting the time for the transfer to standbay OFF. Description After pressing the F11 key, turn the ADJUST control. Selection can be made between 0 and [...]

  • Page 20

    – 20 – HOME SET UP menu ∑ Reference OUT REF: This sets the video output signal reference. AUTO: When the REF VIDEO connector input sig- nal is available, the output reference is locked to REF VIDEO; when it is not avail- able, it is locked to the INPUT input signal. When neither the REF VIDEO nor INPUT input signal is available, the internal [...]

  • Page 21

    – 21 – HOME SET UP menu ∑ Programmed play function (1) Press the F4 (PRG PLY) key. (2) Set the step to FINE or COARSE using the F3 (PRG PLY) key. (3) Set the programmed play speed using the ADJUST control. (4) Press the PLAY and VAR buttons together. (5) To change the playback speed, turn the ADJUST control while pressing the VAR button. (6) [...]

  • Page 22

    – 22 – VIDEO IN menu This menu is displayed by pressing the following key: VIDEO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 23

    – 23 – VIDEO IN menu Key F1 F2 F3 – F11 F12 F13 Key designation INPUT For selecting the HD video input signals. INT SG For selecting the type of HD internal signals. —— INT SG For selecting the type of SD internal signals. INPUT For selecting the SD video input signals. Description DIGITAL: Selects the serial input signals. INT SG: Select[...]

  • Page 24

    – 24 – VIDEO OUT HD menu This menu is displayed by pressing the following key: VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 25

    – 25 – VIDEO OUT HD menu Key F1 F2 F3 F4 F5 – F7 F8 F9 F10 F11 – F13 Key designation For adjusting the Y level. PB For adjusting the P B level. PR For adjusting the P R level. BLACK.L For adjusting the black level. —— SET UP SD CONVERT —— Description j¶ to i 3 dB ( j 3 dB to i 3 dB in fine adjustment mode) ≥ Establishes the fine [...]

  • Page 26

    – 26 – VIDEO OUT HD SET UP menu This menu is displayed by pressing the following keys: > F8 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 27

    – 27 – VIDEO OUT HD SET UP menu Key F1 F2 – 5 F6 F7 F8 F9 – F11 F12 F13 Key designation LINE CONV ° —— SERIAL SYS PHASE INTERP. Interpolation EXIT —— STATE —— Description Line conversion function OFF: No line conversion; when a 1035 tape is played back, 1080 signals with black bands added at the top and bottom of the picture ar[...]

  • Page 28

    – 28 – VIDEO OUT HD SET UP STATE menu This menu is displayed by pressing the following keys: (or ) >> OR >> (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: When the EE/EE1 is selected, the E-E through mode (AV minimum delay[...]

  • Page 29

    – 29 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cursor will[...]

  • Page 30

    – 30 – VIDEO OUT SD menu This menu is displayed by pressing the following keys: > F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 31

    – 31 – VIDEO OUT SD menu Key F1 F2 F3 F4 F5 – F6 F7 F8 – F9 F10 F11 F12 F13 Key designation Y For adjusting the Y level. PB For adjusting the P B level. PR For adjusting the P R level. BLACK.L For adjusting the black level. —— HD —— CONVERT CMPST SDI —— Description j¶ to i 3 dB ( j 3 dB to i 3 dB in fine adjustment mode) ≥ Es[...]

  • Page 32

    – 32 – VIDEO OUT SD SET UP COMPOSITE menu This menu is displayed by pressing the following keys: >> F11 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 33

    – 33 – VIDEO OUT SD SET UP COMPOSITE menu Key F1 F2 – F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation COMB FIL ° 1 For controlling the comb filter. —— SYS SC For adjusting the system subcarrier. SYS H For adjusting the system H phase. INTERP. Interpolation EXIT —— 7.5%STUP For adding 7.5% setup to the composite output. LINE BLK ° [...]

  • Page 34

    – 34 – VIDEO OUT SD SET UP CMPST STATE menu This menu is displayed by pressing the following keys: (or [AUDIO OUT]) >> OR >> (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 VIDEO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: The E-E through mode (AV minimum delay mode) is established.[...]

  • Page 35

    – 35 – VIDEO OUT SD SET UP CMPST STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cu[...]

  • Page 36

    – 36 – VIDEO OUT SD SET UP SDI menu This menu is displayed by pressing the following keys: )) F12 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 37

    – 37 – VIDEO OUT SD SET UP SDI menu ° 1 This adjustment is possible only when the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed. ° 2 In a mode other than the 525i (480/59i) mode, this adjustment is possible only when the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed. Key F1[...]

  • Page 38

    – 38 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu This menu is displayed by pressing the following keys: )) (or ) ) . F11 F12 F11 F9 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 – F7 F8 F9 F10 F11 F12 – F13 Key designation —— EXIT ALL ON ALL OFF LINE BLK —— Description Returns the VTR to the VIDEO OU[...]

  • Page 39

    – 39 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu ∑ Setting the line blanking The blanking lines in the vertical blanking period can be set in 1-line increments. (1) Press the center cursor key. The cursor now appears. (2) Move the cursor and select the lines to be blanked. (3) Press the center cursor key to select ON or OFF [...]

  • Page 40

    – 40 – VIDEO OUT SD SET UP SDI STATE menu This menu is displayed by pressing the following keys: (or ) )) OR )) (or ) ) . F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 – F7 F8 F9 – F13 Key designation —— EE_MODE —— EXIT —— Description NORMAL: The standard mode is est[...]

  • Page 41

    – 41 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ° The cursor will[...]

  • Page 42

    – 42 – VIDEO OUT CONVERT menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: ) F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F6 F7 F8 F9 F10 – F1 3 Key designation HD_TO_SD SD_TO_HD HD_TO_HD[...]

  • Page 43

    – 43 – VIDEO OUT CONVERT HD_TO_SD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) F1 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F7 F8 F9 – F13 Key designation MODE RESPONSE ENHANCE[...]

  • Page 44

    – 44 – VIDEO OUT CONVERT SD_TO_HD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) F2 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F7 F8 F9 – F13 Key designation MODE RESPONSE ENHANCE[...]

  • Page 45

    – 45 – VIDEO OUT CONVERT HD_TO_HD menu (This menu appears when the AJ-UDC3700P HD-SD format converter board, an optional accessory, has been installed.) This menu is displayed by pressing the following keys: )) ° This menu is operational when 1080/23.98p or 1080/24p has been set as the system format. F3 F10 VIDEO OUT F13 F12 F1 1 F10 F9 F8 F7 [...]

  • Page 46

    – 46 – AUDIO IN menu This menu is displayed by pressing the following key: AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here. PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.[...]

  • Page 47

    – 47 – AUDIO IN menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For adjusting the audio CH1 input level. CH-2 For adjusting the audio CH2 input level. CH-3 For adjusting the audio CH3 input level. CH-4 For adjusting the audio CH4 input level. CUE For adjusting the cue audio input level. PCM CUE SET UP CH-MIX CH-5 For ad[...]

  • Page 48

    – 48 – AUDIO IN PCM INPUT SELECT menu This menu is displayed by pressing the following keys: > F6 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 49

    – 49 – AUDIO IN PCM INPUT SELECT menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 Key designation CH-1 For selecting the recording signals of digital audio CH1. CH-2 For selecting the recording signals of digital audio CH2. DIGITAL For selecting the CH1 and CH2 digital input signals. CH-3 For selecting the recording signals of digital audio CH3. CH-4 For se[...]

  • Page 50

    – 50 – AUDIO IN PCM INPUT SELECT menu Key F10 F11 F12 F13 Key designation CH-6 For selecting the recording signals of digital audio CH6. DIGITAL For selecting the CH7 and CH8 digital input signals. CH-7 For selecting the recording signals of digital audio CH7. CH-8 For selecting the recording signals of digital audio CH8. Description ANA CH2: S[...]

  • Page 51

    – 51 – AUDIO IN CUE INPUT SELECT menu This menu is displayed by pressing the following keys: > F7 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 52

    – 52 – AUDIO IN CUE INPUT SELECT menu Key F1 F2 F3 F4 F5 – F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For setting cue mixing for CH1. CH-2 For setting cue mixing for CH2. CH-3 For setting cue mixing for CH3. CH-4 For setting cue mixing for CH4. —— EXIT CUE For selecting the cue audio recording signals. CH-5 For setting cue mixing for C[...]

  • Page 53

    – 53 – AUDIO IN SET UP menu This menu is displayed by pressing the following keys: > OR > F6 SET UP F8 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 54

    – 54 – AUDIO IN SET UP menu Key F1 F2 – F5 F6 F7 F8 F9 F10 F11 – F13 Key designation INT SG MD —— PEAK HOLD For setting the peak hold. SCALE For switching the level meter scale. EXIT DATA ADV ° 1 STYLE ° For setting the digital audio input/output data format. —— Description For selecting the internal audio test signal. TONE: Refer[...]

  • Page 55

    – 55 – AUDIO IN CH-MIX SELECT menu This menu is displayed by pressing the following keys: > F9 AUDIO IN F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 – F5 F6 F7 F8 F9 – F13 Key designation SELECT —— CH-MIX (ON) For mixing the input signals with the signals played back simultaneously and recording them. CH-MIX (OFF) For prohib[...]

  • Page 56

    – 56 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (1) Press the F6 (CH-MIX) key to set it ON. The mixing graph display now appears. (2) Press the center cursor key to display the cursor. (3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed. (4) Press the center cursor key to select the signals to be mi[...]

  • Page 57

    – 57 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (continued) (5) Move the cursor to the mixing ratio display area, and turn the ADJUST control to set the ratio at which the signals are to be mixed (in 1% increments). Mixing ratio display area O Notes N ≥ When the PLAY button is pressed after the CH-MIX mode has been set, the F6 (CH-MIX) [...]

  • Page 58

    – 58 – AUDIO OUT menu This menu is displayed by pressing the following key: AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here. PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.[...]

  • Page 59

    – 59 – AUDIO OUT menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 For adjusting the audio CH1 playback level. CH-2 For adjusting the audio CH2 playback level. CH-3 For adjusting the audio CH3 playback level. CH-4 For adjusting the audio CH4 playback level. CUE For adjusting the cue audio playback level. —— MONITOR SE[...]

  • Page 60

    – 60 – AUDIO OUT MONITOR menu This menu is displayed by pressing the following keys: > F7 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 61

    – 61 – AUDIO OUT MONITOR menu Key F1 F2 F3 F4 – F6 F7 F8 F9 – F10 F11 F12 F13 Key designation MODE For selecting the mode. L CH R CH —— A.MONI For selecting the audio monitor output level adjustment. EXIT —— R CH L CH MODE Description Selects the VTR mode in which the monitor output signals are automatically switched to the cue sign[...]

  • Page 62

    – 62 – AUDIO OUT SET UP menu This menu is displayed by pressing the following keys: > OR > F7 SET UP F8 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 63

    – 63 – AUDIO OUT SET UP menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 Key designation A/V PHASE ° For adjusting the audio output phase in relation to the video phase. JOG PROC For setting the digital process ON/OFF. VAR PROC For setting the digital process ON/OFF. PB FADE Playback fade. PB OUT Selects the audio output when playback is started. PEAK HOLD[...]

  • Page 64

    – 64 – AUDIO OUT SET UP menu Key F10 F11 F12 F13 Key designation STYLE ° —— STATE —— Description This menu item can be set by pressing the F10 key together with the F key. PCM: The style is set to the normal PCM audio mode. DATA: The style is set to the data mode (compressed audio: Dolby-E). Transfers the VTR to the AUDIO OUT SET UP ST[...]

  • Page 65

    – 65 – AUDIO OUT SET UP menu ∑ Adjusting the audio output signals in relation to the video signals (1) Press the F1 (A/V PHASE) key to put the display in reverse video. (2) Adjust the phase difference using the ADJUST control. When the ADJUST control is turned, the display changes to VAR. (The adjustment can now be varied in 1-sample incremen[...]

  • Page 66

    – 66 – AUDIO OUT SET UP STATE menu This menu is displayed by pressing the following keys: >> F12 F8 AUDIO OUT Description NORMAL: The standard mode is established (E-E through mode is turned OFF). THROUGH: The E-E through mode (AV minimum delay mode) is established. ° A discrepancy occurs between the video (audio) output and time code ou[...]

  • Page 67

    – 67 – – 67 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR ’ s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ≥ The[...]

  • Page 68

    – 68 – AUDIO OUT SDI ASIGN menu This menu is displayed by pressing the following keys: >> F12 F8 AUDIO OUT F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 69

    – 69 – Description Selects the channels whose signals are to be output to HD SDI embedded audio channels 1 through 4. CH1 T 4: The signals of CH1 through CH4 are output. CH5 T 8: The signals of CH5 through CH8 are output. OFF: No signals are output. Selects the channels whose signals are to be output to HD SDI embedded audio channels 5 through [...]

  • Page 70

    – 70 – TC/CHR menu This menu is displayed by pressing the following key: TC/CHR F13 F12 F1 1 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1[...]

  • Page 71

    – 71 – TC/CHR menu Description INT: Built-in time code generator. EXT LTC: LTC time code from TIME CODE input connector. S LTC: LTC time code added to serial signals; not displayed when the SD mode is selected. S VTC: VTC time code added to serial signals; not displayed when the SD mode is selected. EXT VITC: VITC time code added to video signa[...]

  • Page 72

    – 72 – TC/CHR menu Description ON: CF BIT is recoorded. OFF: CF BIT is not recorded. ≥ When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, the VTR conforms to the external color frame bit. Transfers the VTR to the TC/CHR SET UP menu screen. Transfers the VTR to the TC/CHR CONVERT menu screen. LTC: LTC is read out all the time. AUTO[...]

  • Page 73

    – 73 – TC/CHR menu ∑ Changing the superimposing position (1) Move the position using the cursor keys. ≥ When a cursor key is held down, the cursor will move more quickly. ≥ When the center cursor key is pressed, the superimposing re- turns to its initial position. ∑ Time code displays and VTR’s operating modes Display the time codes a[...]

  • Page 74

    – 74 – TC/CHR menu ∑ Time code displays and VTR’s operating modes (continued) VTR’s operating modes STOP F.FWD PREVIEW REW REVIEW EDIT PLAY (edit playback) PREROLL EDIT REC (edit recording) AUTO EDIT (automatic editing) CUE UP JOG STANDBY OFF VAR EJECT SHTL DMC PREVIEW REC DMC EDIT REC (display blinks during Pre-CTL operation) OUT PREVIEW[...]

  • Page 75

    – 75 – TC/CHR menu Table of user bit settings F1 (SOURCE) INT (internal) TC S LTC S VITC EXT LTC EXT LTC F2 (TC SLAVE) —— —— SLAVE DIRECT F3 (UB SLAVE) ON OFF ON OFF ON OFF F10 (TCR) LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUDIO VITC LUBG mode REGEN INT UB PRESET INT UB EXT REGEN INT UB PRESET INT UB DI[...]