English dropdown-ico

Pelco ES30PC manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Pelco ES30PC, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Pelco ES30PC one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Pelco ES30PC. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Pelco ES30PC should contain:
- informations concerning technical data of Pelco ES30PC
- name of the manufacturer and a year of construction of the Pelco ES30PC item
- rules of operation, control and maintenance of the Pelco ES30PC item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Pelco ES30PC alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Pelco ES30PC, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Pelco service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Pelco ES30PC.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Pelco ES30PC item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    ES30PC/ES31PC Esprit ® with Pressurized IOC INSTALLATION/OPERATION C311M-N (6/06) U.S. Patent D-472.260[...]

  • Page 2

    [...]

  • Page 3

    C311M-N (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Page 4

    4 C311M-N (6/06) Turning Limit Stops On Or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Programming Limit Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Page 5

    C311M-N (6/06) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other [...]

  • Page 6

    6 C311M-N (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This[...]

  • Page 7

    C311M-N (6/06) 7 Description The ES30PC/ES31PC Esprit Series is designed to protect camera optics and electronics from moisture and airborne contaminants. The system features a receiver , pan and tilt, enclosure, and a pressurized integrated optics cartridge (IOC). The integrated optics cartridge packages an auto focus camera, lens, heater , and se[...]

  • Page 8

    8 C311M-N (6/06) Installation 1. When installing the ES30PC/ES31PC Esprit ® system, allow for sufficient clearance between the top of the unit and overhead obstructions. This will prevent interference when the enclosure is driven to its maximum elevation of 33 degrees. 2. Remove the transformer module from the base of the system by loosening the [...]

  • Page 9

    C311M-N (6/06) 9 4. Route the wires and cables through the center of the Esprit mount. Reinstall the transformer module into the base. The transformer module can be positioned in the mount base in only one orientation. 5. ES30PC-5/ES31PC-5 Models Only – Set the 120/230 voltage selector switch on the transformer to the appropriate voltage. 6. Conn[...]

  • Page 10

    10 C311M-N (6/06) 7. Install mount; refer to the installation manual supplied with the mount for instructions. 8. T urn on the power . If the red LED lights, turn off the power and proceed to the next step. If the red LED does not light, refer to the T roubleshooting section. 9. Plug the male Esprit system connector , located on the bottom of the p[...]

  • Page 11

    C311M-N (6/06) 11 c. Replace the plug. 11. Refer to the Operation and Programming sections for instructions on how to use your ES30PC/ES31PC Series Esprit integrated positioning system.[...]

  • Page 12

    12 C311M-N (6/06) TXB Series T ranslator Board Installation (Optional) Pelco’ s TXB Series allows controllers from other companies to communicate with the Esprit system. To install a TXB Series board, remove the left cover of the pan and tilt. Once the cover is removed, refer to the manual supplied with the translator board to complete the instal[...]

  • Page 13

    C311M-N (6/06) 13 TOP GASKET FRONT RAIN GUARD[...]

  • Page 14

    14 C311M-N (6/06) Operation POWER -UP DISPLAY When the system is powered up, the selected protocol, revision number , and other information is displayed on the monitor . For example, the screen might show the following information: HOW TO OPERATE Y OUR SYSTEM OPERATING NOTES ENVIRONMENTAL RANGE The operating temperature ranges from a minimum of -50[...]

  • Page 15

    C311M-N (6/06) 15 PRESSURIZED INTEGRATED OPTICS CARTRIDGE The pressurized IOC houses an auto focus camera, lens, heater , and sensors in a self-contained, sealed unit. Dry nitrogen pressurized to 10 psig controls the environment inside the cartridge, eliminating internal condensation and corrosion. Sensors strategically placed inside the pressurize[...]

  • Page 16

    16 C311M-N (6/06) CURRENT READING MENU The Current Reading menu displays the existing status of temperature, pressure, and dewpoint inside the integrated optics cartridge. An asterisk displayed to the left of a menu item denotes that an alert condition exists. Due to the heat emitted from the electronics of the camera, normal temperature operating [...]

  • Page 17

    C311M-N (6/06) 17 ZONES A zone is a programmed pan area with set boundaries and identifying label. The Esprit system has a maximum of eight zones, each with a 20-character label. Zones can be programmed to blank video when the camera pans into the zone area. If a zone is blanked, the system displays the message, VIDEO BLANK. (Refer to Zone Blank in[...]

  • Page 18

    18 C311M-N (6/06) Programming – ES30PC16/ES31PC16 Backlight comp Off Zoom limit x- - Reset camera <Gain/AGC> <Auto iris> Next Exit Camera Menu Line Sync On Line Sync Phase 0 Exit Line Sync Menu Power Up Default Exit Power -Up Menu Wiper Mode Momentary Wiper Dwell <s> 2 Wiper T ime <m> 60 Exit *Wiper Menu Limit Stops Off Se[...]

  • Page 19

    C311M-N (6/06) 19 Programming – ES30PC22/ES31PC22 Gain Limit 7 Exit Gain/AGC Menu Auto-iris mode Auto Auto-iris level 66 Auto-iris peak 16 Exit Auto Iris Menu LowLight limit 2 Shutter speed Auto Auto focus mode Auto <Sharpness> <White balance> Prev Exit Next Menu Auto Sharpness On Sharpness 13 Exit Sharpness Menu Auto white bal On R-G[...]

  • Page 20

    20 C311M-N (6/06) Programming – ES30PCBW24/ES31PCBW24 Gain Limit 28 Exit Gain/AGC Menu Auto-iris mode Auto Auto-iris level 91 Auto-iris peak 16 Exit Auto Iris Menu LowLight limit 2 Shutter speed Auto Auto focus mode Auto <IR Filter> <Sharpness> <White balance> Prev Exit Next Menu Auto Sharpness Sharpness On Exit Sharpness Menu I[...]

  • Page 21

    C311M-N (6/06) 21 Programming ACCESSING MAIN MENU (PRESET 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (28 if in 32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for v[...]

  • Page 22

    22 C311M-N (6/06) KBD4000/KBD4002/KBD4000V 1. Press the SPOT MONITOR key . 2. Enter 95, and then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key . 2. Position the asterisk in the YES row and press the F1 key . The main menu appears.[...]

  • Page 23

    C311M-N (6/06) 23 ACK ACT (ACKNOWLEDGE ACTION) If an enivornmental condition inside of the IOC goes outside of the factory set limits (such as “Low Pressure”) then select ACK Alert to activate the alert label behavior . Program ACK Act to establish alert label behavior after alert acknowledgement. The following acknowledge actions are available[...]

  • Page 24

    24 C311M-N (6/06) ALERT DISPLAY POSITION Screen positioning of the alert label is user -defined. Positioning options include the following: To set the alert label position: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Alert. 3. Press the Iris Open button to enter the Alert menu. 4. Position the cursor (>[...]

  • Page 25

    C311M-N (6/06) 25 ALERT REPEAT Y ou can program how often an ALERT label is repeatedly displayed until it is acknowledged by the system controller . The following settings are available: • Constant: The ALERT label is continually displayed on the monitor until acknowledged. • 15 min off: The ALERT label is displayed every 15 minutes for a 15-se[...]

  • Page 26

    26 C311M-N (6/06) AUTO FOCUS MODE There are two auto focus modes: • Auto: If auto focus is in the auto mode, pressing the Focus Far or Focus Near button will place the focus in the manual mode. The system will return to auto focus if you pan or tilt the unit or do a zoom function. • Off: If the mode is set to off, the dome will operate in the m[...]

  • Page 27

    C311M-N (6/06) 27 AUTO IRIS The following are the settings for auto iris: Mode, Level, and Peak. To change the settings for auto iris: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Camera. 3. Press the Iris Open button to enter the Camera menu. 4. Position the cursor (>) beside Auto Iris. 5. Press the Iri[...]

  • Page 28

    28 C311M-N (6/06) AUTO IR LEVEL (MODELS ES30PCBW24/ES31PCBW24) The auto IR level is the light level at which the infrared filter switches IN or OUT . Following are the available settings for the Auto IR Level: • DUSK (default): Approximately 6 lux (black-white), approximately 13 lux (color) • DARK: Approximately 0.1 lux (black-white), approxim[...]

  • Page 29

    C311M-N (6/06) 29 AUTO SHARPNESS The following settings are available for auto sharpness: • On: Automatically sets the sharpness of the camera. • Off: The sharpness of the camera needs to be manually set (refer to Sharpness). To change the mode: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Camera. 3. Pr[...]

  • Page 30

    30 C311M-N (6/06) AZ/EL Az/El programs the horizontal display position of the Azimuth 1 /Elevation 2 label. NOTE: Az/El display is not available while you are programming or running a pattern. The following settings are available for the Az/El label: • Off: Label is not displayed. • Left (default): Label is displayed on the left-hand side of th[...]

  • Page 31

    C311M-N (6/06) 31 AZ/EL LINE Az/El Line controls the vertical display position of the Azimuth/Elevation label. The label may be displayed on lines 3 through 10. Line 3 is the third line from the top of the screen and line 10 is located at the bottom of the screen. Line 10 is the default setting. NOTE: Az/El display is not available while you are pr[...]

  • Page 32

    32 C311M-N (6/06) AZIMUTH ZERO Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the programmed zero-degree point that is normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and compass readings are based on the set azimuth zero point. To set azimuth zero: 1. Program preset 95 (28). The main menu appears.[...]

  • Page 33

    C311M-N (6/06) 33 BACKLIGHT COMPENSATION There are two backlight compensation modes: • On: The system uses the center 10 percent of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to white. The camera will adjust the iris so that the object in the sensitive area is properly exposed. NOTE: E[...]

  • Page 34

    34 C311M-N (6/06) DIRECTION Direction programs the horizontal display position of the Direction label (N, NW , NE, …). NOTES: • For direction to be accurate, azimuth zero must be set to magnetic north. • Direction display is not available while you are programming or running a pattern. The following settings are available for the Direction la[...]

  • Page 35

    C311M-N (6/06) 35 DIRECTION LINE Direction Line controls the vertical display position of the Direction label. The label may be displayed on lines 3 through 10. Line 3 is the third line from the top of the screen and line 10 is located at the bottom of the screen. Line 10 is the default setting. NOTE: Direction display is not available while you ar[...]

  • Page 36

    36 C311M-N (6/06) DISPLAY DURATION Display Duration programs the duration the Az/El, Direction, and Zoom labels are displayed on the monitor . The available settings for display duration include the following: • Constant: The label is displayed continuously . • 2 Seconds (default): The label is displayed for 2 seconds after PTZ functions end. ?[...]

  • Page 37

    C311M-N (6/06) 37 GAIN/AGC GAIN LIMIT The gain limit sets the maximum level for the automatic gain control. Increasing the level will increase the signal level and increase the noise level of the picture. To change the gain: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Camera. 3. Press the Iris Open button [...]

  • Page 38

    38 C311M-N (6/06) IR FILTER MODE (MODELS ES30PCBW24/ES31PCBW24) There are two settings for the IR filter mode: IMPORT ANT : Automatic shutter speed must be set to Auto for the IR filter to operate automatically . If the automatic shutter speed is disabled, the IR filter setting will automatically switch to OFF . • Auto: IR filter switches in [...]

  • Page 39

    C311M-N (6/06) 39 LIMIT STOPS NOTE: Limit stops are inactive while setting items in the program menu (e.g. azimuth zero, scan limits, manual pan limits). T URNING LIMIT STOPS ON OR OFF To change the limit stop mode: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Limit Stop. 3. Press the Iris Open button to en[...]

  • Page 40

    40 C311M-N (6/06) Limit Stops Menu The manual pan limit stops can be set at the controller using the Limit Stops menu: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Limit Stop. 3. Press the Iris Open button to enter the Limit Stop menu. 4. Move the cursor to Set Man Limits and press the Iris Open button. PRE[...]

  • Page 41

    C311M-N (6/06) 41 Limit Stops Menu The manual pan limit stops can be set at the controller using the Limit Stops menu: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Limit Stop. 3. Press the Iris Open button to enter the Limit Stop menu. 4. Move the cursor to Set Scan Limits and press the Iris Open button. PR[...]

  • Page 42

    42 C311M-N (6/06) LINE SYNCHRONIZATION If cameras are out of phase with each other , they may produce what appears to be vertical roll when switching between cameras. There are two settings for line synchronization: • On: Adjust the synchronization of the power line voltage so that it is in phase with other cameras. • Off: The system synchroniz[...]

  • Page 43

    C311M-N (6/06) 43 LOWLIGHT LIMIT (MODELS ES30PC22/ES31PC22 AND ES30PCBW24/ES31PCBW24 ONLY) This setting determines the maximum length of time the shutter will remain open automatically in low light conditions. There are six choices: NOTES: • LOWLIGHT does not mean NO LIGHT . Some type of illumination is required. • Auto focus is automatically t[...]

  • Page 44

    44 C311M-N (6/06) PARK T IME MINUTES This feature causes the system to park at preset 1 after a programmed number of minutes of control inactivity . The time can be set from 1 minute to 720 minutes (12 hours), or it can be set to zero, which disables this feature. NOTE: Preset 1 must be programmed for the system to park. To change the park time: 1.[...]

  • Page 45

    C311M-N (6/06) 45 PATTERN LENGTH The Esprit can do the following: • One full pattern that is 1.5, 3, or 6 minutes long. • T wo half patterns that is .75, 1.5, or 3 minutes long. This pattern can consist of any standard pan and tilt or lens command. Presets, flip, and turbo are not allowed in a pattern. Zone scan can be enabled while running a [...]

  • Page 46

    46 C311M-N (6/06) POWER -UP MODE This feature lets the dome resume a desired condition following power -up. The menu includes the following choices. • Default: On power -up, the system goes through a configuration cycle and stops at zero reference, showing “Configuration Done,” address, and mode settings on the screen. • Park: The system [...]

  • Page 47

    C311M-N (6/06) 47 PROPORTIONAL PAN There are two proportional pan modes: • On: Enables the proportional pan mode. The amount of zoom controls the pan and tilt. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings. This keeps the image from moving too fast on the m[...]

  • Page 48

    48 C311M-N (6/06) RESET CAMERA Resetting the camera returns the settings to their defaults. T urning off power does not reset the camera. Camera settings are retained in memory . When the power is turned back on, the settings will be the same as they were when the power was turned off. To reset the camera: 1. Program preset 95 (28). The main menu a[...]

  • Page 49

    C311M-N (6/06) 49 SCAN SPEED The scan speed is adjustable from 1-40 degrees per second. This occurs in three scan modes: auto, random, and frame scan. To change the scan speed: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Other . 3. Press the Iris Open button to enter the menu entitled Other . 4. Position t[...]

  • Page 50

    50 C311M-N (6/06) SHARPNESS Use the Sharpness setting to manually set the sharpness of the camera. To manually set the sharpness of the camera: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Camera. 3. Press the Iris Open button to enter the Camera menu. 4. Position the cursor (>) beside Next. Press the Ir[...]

  • Page 51

    C311M-N (6/06) 51 SHUTTER SPEED There are several electronic shutter speed settings: In the Auto setting the camera controls the shutter speed automatically . Increasing the shutter speed lowers the light sensitivity , but rapidly moving objects will be less blurred. NOTE: (ES30PCBW24/ES31PCBW24) If the IR Filter Mode is set to Auto, the Shutter Sp[...]

  • Page 52

    52 C311M-N (6/06) SPEED PROFILE This feature allows the operator to set the wind speed conditions for the location of the Esprit system. Y ou can set two wind speed profiles of 50 mph or 90 mph in which the system will remain operational. In both settings, the pan speed will be a maximum of 40 degrees per second. The difference will be in the turb[...]

  • Page 53

    C311M-N (6/06) 53 WHITE BALANCE The settings for white balance are as follows: • Auto white bal • R Gain • B Gain To change the white balance settings: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Camera. 3. Press the Iris Open button to enter the Camera menu. 4. Position the cursor (>) beside Next[...]

  • Page 54

    54 C311M-N (6/06) WIPER MODE There are three wiper settings: • Wiper Mode (Momentary or Continuous) • Wiper Dwell • Wiper T ime To change the wiper settings: 1. Program preset 95 (28). The main menu appears. 2. Position the cursor (>) beside Wiper . 3. Press the Iris Open button to enter the Wiper menu. 4. Move the joystick up or down to p[...]

  • Page 55

    C311M-N (6/06) 55 ZONES Basic rules for setting zones: 1. Refer to the documentation for your control system to program zones. 2. Establish zones using the controller , prior to programming ZONE BLANK with the Esprit onscreen menu. 3. T o accurately set zone areas, zoom wide to the maximum field of view . 4. Set zones moving the joystick left to r[...]

  • Page 56

    56 C311M-N (6/06) ZOOM Zoom programs the horizontal display position of the Zoom label. The following settings are available for the Zoom label: • Off: Label is not displayed. • Left: Label is displayed on the left-hand side of the screen. • Center (default): Label is displayed in the center of the screen. • Right: Label is displayed on the[...]

  • Page 57

    C311M-N (6/06) 57 ZOOM LIMIT ES30PC16/ES31PC16: 16X optical zoom and 10X electronic zoom, can be set for 16X, 32X, 64X, 128X, or 160X. ES30PC22/ES31PC22: 22X optical zoom and 10X electronic zoom, can be set for 22X, 32X, 88X, 176X, or 220X. ES30PCBW24/ES31PCBW24: 24X optical zoom and 10X electronic zoom, can be set for 24X, 32X, 96X, 192X, or 240X.[...]

  • Page 58

    58 C311M-N (6/06) ZOOM LINE Zoom Line controls the vertical display position of the Zoom label. The label may be displayed on lines 3 through 10. Line 3 is the third line from the top of the screen and line 10 is located at the bottom of the screen. Line 10 is the default setting. NOTE: Zoom display is not available while you are programming or run[...]

  • Page 59

    C311M-N (6/06) 59 T roubleshooting NOTE: The system contains no user -serviceable parts. If there is a problem with your system, it must be returned to Pelco for servicing. Symptom: System does not operate. 1. Check system input voltage. 2. The Esprit system is protected by a resettable overcurrent protective device located in the transformer modul[...]

  • Page 60

    60 C311M-N (6/06) 5. Check for normal load termination of 75 ohms. When looping through VCRs or multiplexers, make sure the signal is terminated at the end device. Some termination symptoms and problems are listed below . Symptom Problem Extremely bright video No termination or high resistance Over contrast or contrast level of monitor needs to Dou[...]

  • Page 61

    C311M-N (6/06) 61 Maintenance Clean the enclosure window periodically with a mild non-abrasive detergent in water and a soft cloth to help maintain picture clarity . If operating problems are experienced with the system, refer to the T roubleshooting section. WIPER If the window wiper assembly is installed, replace worn or deteriorated wiper blades[...]

  • Page 62

    62 C311M-N (6/06) PRESSURIZED IOC IMPORT ANT : Disconnect power to the Esprit system before removing or installing the pressurized cartridge. Software conflicts can occur if the Esprit is not powered-down before removing/installing the IOC. There are no user -serviceable parts internal to the pressurized integrated optics cartridge. If vessel fail[...]

  • Page 63

    C311M-N (6/06) 63 Appendix NOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mode. Therefore, the DIP switch settings have no effect on Coaxitron control signals. *SW1-3 is not used; set it in the OFF position. *SW1-4 is not used; set it in the OFF position. T able A. Switch Set[...]

  • Page 64

    64 C311M-N (6/06) T able B. Switch Settings for SW2 NOTE: The Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mode. Therefore, the DIP switches settings have no effect on Coaxitron control signals. Receiver Address P-T ype D-T ype Control Control Switch Setting SW2-1 SW2-2 SW2-3 SW2[...]

  • Page 65

    C311M-N (6/06) 65 – 112 OFF OFF OFF OFF ON ON ON OFF – 113 ON OFF OFF OFF ON ON ON OFF – 114 OFF ON OFF OFF ON ON ON OFF – 115 ON ON OFF OFF ON ON ON OFF – 116 OFF OFF ON OFF ON ON ON OFF – 117 ON OFF ON OFF ON ON ON OFF – 118 OFF ON ON OFF ON ON ON OFF – 119 ON ON ON OFF ON ON ON OFF – 120 OFF OFF OFF ON ON ON ON OFF – 121 ON O[...]

  • Page 66

    66 C311M-N (6/06) – 234 OFF ON OFF ON OFF ON ON ON – 235 ON ON OFF ON OFF ON ON ON – 236 OFF OFF ON ON OFF ON ON ON – 237 ON OFF ON ON OFF ON ON ON – 238 OFF ON ON ON OFF ON ON ON – 239 ON ON ON ON OFF ON ON ON – 240 OFF OFF OFF OFF ON ON ON ON – 241 ON OFF OFF OFF ON ON ON ON – 242 OFF ON OFF OFF ON ON ON ON – 243 ON ON OFF OFF[...]

  • Page 67

    C311M-N (6/06) 67 Specifications ELECTRICAL Input V oltage 24, 120, or 230 V AC, 50/60 Hz; switch selectable for 120/230 VAC inputs. Reset feature enabled when power becomes unstable or interrupted. Power Requirements Maximum power consumption is 70 VA per system Heater and Defroster Thermostatically controlled heater consumes 10 watts and cycles [...]

  • Page 68

    68 C311M-N (6/06) Focus Automatic and manual override Sensitivity ES30PC16/ES31PC16 0.05 lux at 1/2-second shutter speed (NTSC) 0.05 lux at 1/1.5-second shutter speed (P AL) ES30PC22/ES31PC22 0.02 lux at 1/2-second shutter speed (NTSC) 0.02 lux at 1/1.5-second shutter speed (P AL) ES30PCBW24/ES31PCBW24 0.005 lux at 1/2-second shutter speed (color ,[...]

  • Page 69

    PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted [...]

  • Page 70

    United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ® W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001[...]