Go to page of
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Pentair MiniMax NT Heater, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Pentair MiniMax NT Heater one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Pentair MiniMax NT Heater. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Pentair MiniMax NT Heater should contain:
- informations concerning technical data of Pentair MiniMax NT Heater
- name of the manufacturer and a year of construction of the Pentair MiniMax NT Heater item
- rules of operation, control and maintenance of the Pentair MiniMax NT Heater item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Pentair MiniMax NT Heater alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Pentair MiniMax NT Heater, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Pentair service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Pentair MiniMax NT Heater.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Pentair MiniMax NT Heater item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Rev. B 1-20-04 1 P/N 472299 MiniMax ® NT Heater Digital Display T emperature Controller (DDTC) Installation Instructions Important Notice Attention Installer. This manual contains important information about the installation, operation and safe use of this product. This information should be given to the owner/operator of this equipment. Before in[...]
-
Page 2
P/N 472299 2 Rev. B 1-20-04 SECTION I. INST ALLA TION 1. Turn off the electrical power to the heater. 2. Open the heater’s right door. 3. Disconnect all wires from the 6800 Temperature Controller. 4. Remove the left and right doors from the heater if necessary. 5. Remove four screws on the cover of the 6800 Temperature Controller. 6. Remove the e[...]
-
Page 3
Rev. B 1-20-04 3 P/N 472299 Apply silicone between the gask et and front-mounting frame. Apply silicone between the gask et and rear-mounting frame. Secure DDTC cov er and rain shield by using six scre ws. Figure 2. Figure 3.[...]
-
Page 4
P/N 472299 4 Rev. B 1-20-04 GRN IGN MODULE IGNITOR HOT SURFACE BURNER GND VAL TH IGN L2 L1 IGN/240 MiniMax NT LN Dual Voltage W/DDTC Wiring Diagram ORG WHT GRN ORG RED THERMAL FUSE WHT BLU RED SWITCH WATER PRESSURE GAS VALVE RED WHT BLU RED HIGH LIMIT 115˚F 1 2 3 4 5 3 2 1 GRN AIR PRESS. SW. BLU RED WHT BLOCK TERM BLOCK TERM WHT WHT BLK WHT BLK WH[...]
-
Page 5
Rev. B 1-20-04 5 P/N 472299 GRN IGN MODULE IGNITOR HOT SURFACE BURNER GND VAL TH IGN L2 L1 IGN/240 MiniMax NT STD Dual Voltage W/DDTC Wiring Diagram ORG WHT GRN ORG RED THERMAL FUSE WHT BLU RED SWITCH WATER PRESSURE GAS VALVE RED WHT BLU RED HIGH LIMIT 115˚F 1 2 3 4 5 3 2 1 GRN AIR PRESS. SW. BLU RED WHT BLOCK TERM BLOCK TERM WHT WHT BLK WHT BLK O[...]
-
Page 6
P/N 472299 6 Rev. B 1-20-04 Figure 6. J1 DDTC WATER PRESSURE SWITCH MiniMax NT TSI w/DDTC WIRING DIAGRAM GY AIR PRESSURE SW. O BLOWER O J5 J6 J8 G COM NO R/W R BK/W BK O REMOTE CONTROL MANUAL FOR & INSTALLATION SEE OPERATION 150˚F W HIGH LIMITS O 115˚F R R BL JI0 TFUSE/HLMT/PRESS J4 24V J2 J7 J9 P9 J11 BK W BL GY O R BL Y O W W W IF ORIGINAL [...]
-
Page 7
Rev. B 1-20-04 7 P/N 472299 SECTION III. INTRODUCTION OF DDTC The DDTC board, shown in Figure 7, is a digital temperature controller capable of controlling the pool, spa or both to a minimum temperature of 65° F. (below 65° F. display reads "Off") and a maximum of 104° F. The DDTC board also functions as a system status indicator, usin[...]
-
Page 8
P/N 472299 8 Rev. B 1-20-04 SECTION IV . SET UP The MiniMax NT Heater comes from the factory preset with a pool temperature setting of 78° F. and a preset spa temperature of 100° F., and in the off mode setting. Once the power is turned on, the DDTC board will do a self diagnostic internal check, during this time the display will first read “ 8[...]
-
Page 9
Rev. B 1-20-04 9 P/N 472299 • THERMOST A T This light is on when the thermostat contacts close, signaled by the water temperature falling below the set-point, calling for the heater to fire to maintain the desired water temperature. • HEA TING The heating light is on any time the thermostat has signaled a call for heat which initializes the ign[...]
-
Page 10
P/N 472299 10 Rev. B 1-20-04 NOTE: With this type of two-wire remote, with its own temperature sensors and system control, using the up arrows on the front of the DDTC, hold down the up arrow until you reach the maximum setting of 104° F., this allows the remote system thermostat to operate the heater at any set-point below 104° F., the heater th[...]
-
Page 11
Rev. B 1-20-04 11 P/N 472299 Figure 8.[...]
-
Page 12
P/N 472299 12 Rev. B 1-20-04 Pentair Pool Products 1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 SECTION X. MINIMAX NT HEA TER DDTC RETROFIT KIT PAR TS SAVE THESE INSTRUCTIONS. P/N Description Qt y . 072204 Wir e Ti e 2 471870 Wir e As sem bly , O r ange 2 472060 S ilicone[...]