Pioneer DRM-604X manual

Pioneer  New Media T echnologies, Inc. DRM-602X and DRM-604X CD-ROM Changers Softwar e Driv er Installation Guide Owner’ s Manual[...]

Owner’ s Manual / Softwar e Driver Installation Guide i TRADEMARKS T rademarked names appear throughout this manual. Rather than list the names and entities that o wn the trademarks or insert a trademark symbol with each mention of the trademarked name, the publisher states that it is using the names only for editorial purposes and to the benefit[...]

License Agreement ii Softwar e Driver Installation Guide / Owner’ s Manual License Agreement PIONEER ELECTRONIC CORPORATION SOFTWARE LICENSE AGREEMENT I. GRANT OF LICENSE: Pioneer Electronic Corporation (PEC) grants you the right to use one copy of the enclosed software programs (the softw are) on a single terminal connected to a single computer [...]

License Agreement Owner’ s Manual / Softwar e Driver Installation Guide iii License Agreement (cont.) lease or transfer them to another user except as part of the permanent transfer (as provided abo ve) of all softw are and written materials. V . Y OU MA Y NO T USE, COPY , MODIFY OR TRANSFER THE SOFTW ARE , OR ANY COPY IN WHOLE OR IN P AR T , EXC[...]

iv Softwar e Driver Installation Guide / Owner’ s Manual Limited W arranty Limited W arranty Pioneer Electronics Corp, Inc. warrants that : • The software will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt. • The hardware which accompanies the software wil[...]

Owner’ s Manual / Softwar e Driver Installation Guide v NO LIABILITY FOR CONSEQUENTIAL D AMA GES “IN NO EVENT WILL APPLE COMPUTER, INC. OR PEC OR THEIR DIRECTORS, OFFICERS, EMPLO YEES, OR A GENTS BE LIABLE T O Y OU FOR ANY CONSEQUENTIAL, INCIDENT AL, OR INDIRECT D AMA GES (INCLUDING D AMA GES FOR LOSS OF BUSINESS PR OFITS, BUSINESS INTERR UPTIO[...]

T able of Contents Owner’ s Manual / Softwar e Driver Installation Guide vi T able of Contents 1. INTRODUCTION ...........................................................................1 - 1 Set-Up and Driver Installation Overview .................................1 - 2 2. PRE-INST ALLA TION NOTES .................................................[...]

T able of Contents vii Softwar e Driver Installation Guide / Owner’ s Manual T able of Contents (cont.) 5. SPECIAL ISSUES FOR IBM-PC & COMP A TIBLE USERS .........5 - 1 Third Party Device Drivers ......................................................5 - 1 Networking .............................................................................[...]

List of F igures Owner’ s Manual / Softwar e Driver Installation Guide viii List of Figures Figure 1 – DOS/WINDOWS Installer: Accessing On-Line Help ...........2 - 2 Figure 2 – DOS/WINDOWS Installer: On-Line Help Screen ................2 - 2 Figure 3 – DOS/WINDOWS - Quick Install Process ............................3 - 2 Figure 4 – DOS/WI[...]

Chapter 1 Introduction Owner’ s Manual / Softwar e Driver Installation Guide 1-1 Introduction Congratulations on the purchase of your ne w Pioneer CD-R OM Changer! The unit is packaged with floppy disks that contain de vice drivers necessary for connecting the Pioneer CD-R OM Changer to an IBM-PC or compatible computer or to a Macintosh computer [...]

Introduction Chapter 1 1-2 Softwar e Driver Installation Guide / Owner’ s Manual *********************************** IBM PC/XT/A T/386 User’s , refer to the Chapter 3 for installation instructions. Macintosh User’ s , refer to Chapter 4 for installation instructions. 1) Install a SCSI host adapter (interface card) in the IBM PC or compatible [...]

Chapter 2 Pre-Installation Owner’ s Manual / Softwar e Driver Installation Guide 2-1 Pre-Installation Notes Back Up Diskettes The license agreement that is enclosed with your Pioneer product allo ws you to make a backup of the dri ver diskettes, in case your originals become lost, damaged or corrupted. W e strongly recommend that you take this pr[...]

Pre-Installation Notes Chapter 2 2-2 Softwar e Driver Installation Guide / Owner’ s Manual On-Line Help for IBM-PC & Compatible INST ALLA TION The Pioneer IBM-PC DOS/WINDO WS installation software has an On-Line Help feature av ailable from all of the installation menus. This Help feature can be accessed at any time by pressing the [F1] k ey [...]

Selection methods for IBM-PC & compatible users The table belo w indicates ho w to select/deselect menu options and ho w to mo v e around in the installation screens when installing the IBM-PC DOS/W indo ws driv ers: Chapter2 Pre-Installation Notes Owner’ s Manual / Softwar e Driver Installation Guide 2-3 Action Key Stroke Move to another Men[...]

Pre-Installation Chapter 2 2-4 Softwar e Driver Installation Guide / Owner’ s Manual Characteristic Comment / Definition and/or Key Bold Type Bold type represents a command which you must type. To carry out a command, type the bold-faced word(s) then press [ENTER]. Example: If you are instructed to type A: , type the A, type the : (colon) then pr[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation Owner’ s Manual / Softwar e Driver Installation Guide 3-1 DOS /WINDOWS device driver installation Inspection Checklist / PC Pioneer  Changers are packaged with a floppy disk containing software de vice dri vers and the MSCDEX f ile for IBM-PC and compatible computers. The disk also contains an I[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-2 Softwar e Driver Installation Guide / Owner’ s Manual Quick Installation Installing software dri vers so you can use your Pioneer CD-R Om Changer with your computer is easy! This flo w chart details the installation process. If you are installing from the DOS prompt, follo w the DOS instruction[...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-3 Click on QUICK INST ALL to bring up the QUICK INST ALL Parameters. The QUICK INST ALL parameters pop-up as an adjacent menu, as illustrated below: Figure 4 - DOS/WINDOWS Installer: Main Menu Figure 5 - DOS/WINDOWS - Quick Install Default Set[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-4 Softwar e Driver Installation Guide / Owner’ s Manual These default settings are suitable for most computer conf igurations. If you need to change the settings, refer to the QUICK INST ALL Parameters on page 3-5. If you choose to ov er -ride the Auto SCSI ID Search feature using the Custom Inst[...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-5 accept the default selection or Press [F3] to bring up the adjacent menu that allo ws you to select a dif ferent host adapter . Use the UP or DO WN arrow ke ys, or a mouse to indicate the kind of SCSI host adapter you are using. See Figure 6[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 1 3-6 Softwar e Driver Installation Guide / Owner’ s Manual T o accept the QUICK INST ALL Parameters press the [ENTER] ke y from anywhere in the menu, or click on <ENTER>-Accept in the lo wer right corner of the menu. Then, the follo wing screen will pop-up: If you are not satisfied with the [...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-7 selection and press [ENTER]. This Completes the Quick Installation Note: If you choose CUSTOM INST ALL, you must still return to QUICK NOTE: If the messages scroll by too quickly to read, you can pause the screen by quickly pressing [CTRL + [...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-8 Softwar e Driver Installation Guide / Owner’ s Manual Using Y our Pioneer CD-ROM Changer Y ou are now ready to use the Pioneer CD-R OM Changer connected to your computer system. For use under DOS follo w the instructions shown on the left side of the chart. F or use under WINDO WS, follow the i[...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-9 Custom Installation Options Select CUSTOM INST ALL if you are installing two Pioneer Changers in a daisy- chained configuration, or if you w ant to indicate some specif ic changes to the dri ver to complement your specif ic system configurat[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-10 Softwar e Driver Installation Guide / Owner’ s Manual Device Driver Parameters MSCDEX Device Name This is the label that will be declared in both the MSCDEX De vice Dri ver line in the A UTOEXEC.B A T and the Pioneer Device Dri ver line in the CONFIG.SYS. The label name must match in both file[...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-11 MSCDEX Parameters CD-ROM starting drive letter This option allo ws you to indicate any letter after the hard dri ves, hard dri ve partitions, or network volumes as the starting dri ve letter for the indi vidual discs in the Pioneer CD-R OM [...]

Chapter 3 IBM DOS / WINDO WS Driver Installation SCSI ID Parameters SCSI ID of Drive This indicates the the SCSI ID of the first dri ve. (0-6). NO TE: Make sure t he SCSI ID number entered here matches the number set on the back of the Changer . Number of CD-ROM Discs in 1st Drive This indicates the maximum number of discs you will be accessing in [...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-13 Notice – Changes Not Saved This dialog box will appear whene ver you select Custom Install, change some of the parameter settings, and then decide not to sav e them. It is basically warning you that the changes hav e not been saved and th[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-14 Softwar e Driver Installation Guide / Owner’ s Manual Installing Three Pioneer CD-ROM Changers on one SCSI Chain Three or more Changers can be installed on one SCSI chain by editing the Pioneer De vice Dri ver line in the CONFIG.SYS to add an /S: switch and an /N: switch. The /S: switch indica[...]

IBM DOS / WINDO WS Driver Installation Chapter 3 Owner’ s Manual / Softwar e Driver Installation Guide 3-15 Using XDisc (cont.) Then, acti v ate XDISC by typing C:PIONEERXDISC . Once XDISC is launched, type XDISC (space) E (space) 3 to access the third disc in the changer assigned dri v e letter “E”. NO TE: Drive letters are assigned the ne[...]

Chapter 3 IBM DOS / WINDO WS Driver Installation 3-16 Softwar e Driver Installation Guide / Owner’ s Manual Calling MPC within Windows This program can also be used in W indows. Run the Program Manager and open the MS-DOS Prompt icon. Read instructions and press <AL T+ENTER> to open a DOS windo w within W indows. This windo w can be moved a[...]

Macintosh Driver Installation Inspection Checklist / Installation Overview Insert the 3.5” PIONEER Macintosh diskette that ships with the Pioneer CD-R OM Changer into the floppy dri ve of your Macintosh Computer . Double click on the PIONEER diskette icon. Y ou will see these icons: NO TE: The CD-ROM F older contains: CLD Access, Apple CD-R OM, C[...]

Figure 18 - MACINTOSH - System 7.0 and above QUICK INSTALL NOTE: Updates to the drivers may mean that different files will be on the diskette you receive with your Pioneer CD-ROM Drive. You can download the most recent version of the Macintosh Drivers, file CDROMXX.CPT, from the Pioneer Bulletin Board. See Appendix F , Pioneer Technical Resource Nu[...]

Using the Installer with System 7.0 and Above Launch the installer that ships with the diskette to automatically install the dri v ers and files that are needed by the Macintosh to comm unicate with the Pioneer CD-R OM Changer . NO TE: Remov e all virus protection software or other INITs that may conflict from your System F older while you are inst[...]

MA CINTOSH Driver Installation Chapter 4 4-4 Softwar e Driver Installation Guide / Owner’ s Manual This is the message you will see when installation is completed successfully: Click on QUIT , to lea ve the installer . NO TE: Replace any virus protection software or other inits you may ha ve remo ved for this installation back into the System F o[...]

MA CINTOSH Driver Installation Chapter 4 Owner’ s Manual / Softwar e Driver Installation Guide 4-5 Operations Check Other Installation Options If you ar installing more than one SCSI De vice , make sure the SCSI de vices on the chain each hav e individual SCSI ID address numbers between 1 and 6 when the Pioneer Changer is connected to a Macintosh[...]

Chapter 4 MA CINTOSH Driver Installation 4-6 Softwar e Driver Installation Guide / Owner’ s Manual Using CLD Access CLD Access is a control panel document. Select Control Panels from under the Apple Menu, then double click on CLD Access or go into the System F older and open Control P anels F older , then double click on CLD Access to launch it. [...]

Using CLD Remote There is one utility program included with the Macintosh Pioneer CD-R OM driv ers. This is CLD Remote, a remote control program for the Macintosh that can be used to control CD Audio discs. When CLD Remote is opened, the controller screen f or CD-R OM changer appears if the dri v ers are installed, the CD-R OM Changer is attached t[...]

Chapter 4 MA CINTOSH Driver Installation 4-8 Softwar e Driver Installation Guide / Owner’ s Manual Descriptions of CLD REMO TE indicators and control panel (continued) E — These are the control buttons. The lar ge one in the top r ight corner is PLA Y , the one belo w it is P A USE, the on the lo wer left is ST OP , the two abov e that are SCAN[...]

Special Issues for IBM-PC & Compatible Users These are some special issues that may be encountered with IBM-PC & compatible computers when connecting a Pioneer CD-R OM Changer: Third Party Device Drivers A number of third party de vice dri vers are av ailable for different operating systems. Please refer to Pioneer Product Information Bulle[...]

About AUDIO on CD-ROMs There are three types of Audio that you will find on CD-R OM discs: • CD-D A Compact Disc Digital Audio (Conforms to the Red Book Standard) • Compressed Audio (ADPCM, Adapti ve Pulse Code Modulation). Conforms to the Y ellow Book Standard and is found on CD-R OM discs. • Compressed Audio (ADPCM) that is interlea ved wit[...]

Using CD Player (CDP) commands to control the drive After installing the proper de vice dri ver , the /C:CDP switch should be found in the De vice line of the CONFIG.SYS. When this switch is present, CD Player commands can be sent the player either from the DOS Prompt or by using the MPC utility as described in Chapter 3 for IBM-PC and compatible c[...]

Questions and Answers Here are some common questions asked about Pioneer CD-R OM Changers. Can I use my Pioneer CD-ROM Changer on a network? There are many third party dri vers av ailable for networking a Pioneer CD-R OM Changer . Order Pioneer LaserF acts System document number 34 024 and 34 025. See Appendix E for more information on the Pioneer [...]

supports before you purchase a CD-R OM disc that includes compressed audio. What should I do if th e CD-ROM Changer always inserts the first or the same disc, no matter which disc the software has been instructed to use? The software package was probably written to w ork with a single CD-R OM Dri ve. T ry placing the disc in the first slot and then[...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-1 T roubleshooting IBM-PC DOS/WINDOWS Installation If the Pioneer CD-R OM Changer does not respond after running through the Operations Check on page 3-7 of this Software Installation Guide , note an y error messages that may a[...]

T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-2 Softwar e Driver Installation Guide / Owner’ s Manual SCSI inter face card can’t communicate with drive This means the device driver was not able to locate the proper SCSI inter face card in the PC. 1. V erify that the Pioneer CD-ROM Changer has been tur ned ON. 3. Power down [...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-3 SCSI inter face card can’t communicate with drive This means the device driver was not able to locate the proper SCSI inter face card in the PC. 6. There could be a conflict with another board i nstalled in the computer . T[...]

T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-4 Softwar e Driver Installation Guide / Owner’ s Manual T ime out during selection phase This means the driver could not locate the Changer on the SCSI bus. The device driver was, however , able to locate the inter face card. 1. V erify that the Pioneer CD-ROM Changer is tur ned O[...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-5 T ime out waiting for initial bus free phase, status phase or data phase This means you have some kind of problem with the SCSI cable or a problem with ter mination. 1. Power down the computer and the Pioneer Changer and re-s[...]

T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-6 Softwar e Driver Installation Guide / Owner’ s Manual The Inquiry ID=0 line is blank This means that the device driver located a inter face card which appeared to be a Future Domain inter face card, but was not. W e have seen this with Seagate ST01 and ST02 inter face cards and [...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-7 CDR101 Not ready reading drive D This means the drive has failed to read the disc. 1. V erify that discs ar e in the player label side down. Also check to make sure the discs are not seriously scratched and that they do not h[...]

T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-8 Softwar e Driver Installation Guide / Owner’ s Manual CDR 103 Disc is not ISO 9660 or High Sierra This means the disc is probably not a High Sierra or ISO 9660 for mat. Either High Sierra or ISO 9660 is required to work with Microsoft Extensions (MSCDEX). 1. V erify that the dis[...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-9 Incorrect DOS version This means the the version of DOS you are using is incompatible with the version of MSCDEX installed. 2. If using a version of DOS lower than 6, include this line in the Config.Sys — C;DOSSETVER.EXE.[...]

T roubleshooting IBM- PC DOS / WINDO WS Installation A ppendix A A-10 Softwar e Driver Installation Guide / Owner’ s Manual Cartridge will not eject from the Changer 1. There are two possible causes of this symptom. One is that the software has locked the magazine into the machine and will not let the user eject it. The other is that the user has[...]

A ppendix A T roubleshooting IBM- PC DOS / WINDO WS Installation Owner’ s Manual / Softwar e Driver Installation Guide A-11 BUSY light Flashes at one-second intervals 1. This is a visual indicator from the drive that something is wrong with the drive, affecting its ability to per for m. It may be a mechanical problem. Or , the drive may be in tes[...]

A ppendix B T roubleshooting Macintosh Driver Installation Owner’ s Manual / Softwar e Driver Installation Guide B-1 T roublshooting Macintosh Driver Installation If you hav e trouble using the Pioneer CD-R OM Changer after you ha ve installed the dri vers, please check these points: 1. Check SCSI ID number Remember , the SCSI ID number must be a[...]

A ppendix C DOS/WINDO WS Device Driver & MSCDEX F ile Owner’ s Manual / Softwar e Driver Installation Guide C-1 Installation Overview for IBM-PC & Compatibles Device Driver & MSCDEX File The INST ALL program adds a line to the CONFIG. SYS File which tells the system to load the de vice dri ver that is correct for the SCSI host adapter[...]

DOS/WINDO WS Device Driver & MSCDEX F ile A ppendix C C-2 Softwar e Driver Installation Guide / Owner’ s Manual NO TE: The /N: switch (indicating the number of discs to access within the changer) and the /S:switch (indicating the SCSI ID of the changer) are automatically determined by the Install Program, and will not usually appear in the co[...]

A ppendix C DOS/WINDO WS Device Driver & MSCDEX F ile Owner’ s Manual / Softwar e Driver Installation Guide C-3 Device Driver command line switches: Switch Description Example /D:(device name) Specifies the device name of the /D:MSCD000 CD-ROM device. This name MUST agree with the device name declared in MSCDEX. /N:n1[,n2] Specifies the numbe[...]

DOS/WINDO WS Device Driver & MSCDEX F ile A ppendix C C-4 Softwar e Driver Installation Guide / Owner’ s Manual Modifications to the AUTOEXEC.BA T file The INST ALL Program also modif ies or creates an A UTOEXEC.B A T file to add an instruction that tells DOS to in voke the MSCDEX.EXE f ile with its correct parameters. This allo ws the system[...]

A ppendix D (CDP) CD Player Commands Owner’ s Manual / Softwar e Driver Installation Guide D-1 Using CDP Commands / CDP Command List For Pioneer CD-ROM Changers S ending CDP (CD Player) Commands from DOS : At the DOS prompt, type the follo wing: C:>ECHO 1KL>CDP <CR> (Carriage return or enter) This will send a command to the CD-R OM C[...]

(CDP) CD Player Commands A ppendix D D-2 Softwar e Driver Installation Guide / Owner’ s Manual The follo wing lists the C ommand M nemonics and an explanation for each: CM Command Drive Action ?A Address Request Returns a 10-digit string (TTIIMMSSFF) representing Track number, Index number, and P-code time for the current address. In Park mode, t[...]

A ppendix D (CDP) CD Player Commands Owner’ s Manual / Softwar e Driver Installation Guide D-3 CM Command Drive Action n KL Key Lock Enables or disables the front panel eject button. n = 0: Enabled. n = 1: Disabled LO Lead Out Lead Out Adress NF Scan Forward Scans forward about 15 seconds; audio attenuated by 12 dB. NR Scan Reverse Scans backward[...]

(CDP) CD Player Commands A ppendix D D-4 Softwar e Driver Installation Guide / Owner’ s Manual CM Command Drive Action a SM Stop Marker Sets a stop marker at address a . When the stop marker is reached, the drive enters Pause mode. Stop markers are cleared by CL and RJ commands. ?T Time Request Returns a four digit string representing the current[...]

Comand Error Messages Return Error Explanation R (GOOD) The command completed successfully. E00 Communication Error Error in command, command too long E04 Feature not Available Unusable command, wrong mode, bad track E06 Missing Argument A required parameter was not supplied E11 Disc not Present No disc loaded, magazine not inserted E12 Address Err[...]

A ppendix E PIONEER LaserF acts System Owner’ s Manual / Softwar e Driver Installation Guide E-1 Pioneer LaserFacts SM System Pioneer Ne w Media T echnologies, Inc., has placed a full library of technical resource materials on a Pioneer LaserF acts System. This is a F AX retriev al system that makes technical documents a v ailable 24-hours per da[...]