Planet Technology IPX-1900 manual

Internet Telephony PBX System IPX-1900 User’s manual Version 1.0.[...]

Copyright Copyright (C) 2008 PLANET T echnology Corp. All rights reserved. The products and programs described in this User ’s Manu al are licensed products of PLANET T echnology , This User ’s Manual contains proprietary information protected by copyright, and this User ’ s Manu al and all accompanying hardware, software, and documentation a[...]

3 Revision User ’s Manual for PLANET Internet T elephony PBX System: Model: IPX-1900 Rev: 1.0 (June, 2008) Part No. EM-IPX19 00 Series V1.0[...]

4 T able of Content s Chapter 1 ................................................................................................ 6 Introduction ............................................................................................ 6 Overview ......................................................................................................[...]

5 Chapter 5 Management ....................................................................... 57 Admin Account ............................................................................................................... 57 Date & T ime ..........................................................................................................[...]

6 Chapter 1 1 Introduction Overview PLANET IPX-1900 IP PBX telephony systems are de signed and optimized for t he small business in daily communications. The IPX-1900 are able to accept 300 user registrations, and easy to install and manage a fully working system with the conve nience and cost advantages. The PLANET IPX-1900 is also designed to ope[...]

7 IP PBX Features • PBX Features Automated Attendant (AA) Interactive V o ice Responses (IVR) V oicem ail support (VM) Call Detailed Record (CDR) User Management via W eb Browsers Display 300 Registered User ’s S tatus: Unregistered / Registered / On-Call Multiple Service Providers Lines / SIP Account s (30) Simultaneou s T runk Links: 30 concu[...]

Front Panel Indicators Figure 1-1. Front Panel of IPX-1900 8 T able1-1. Front Panel description of IP PBX Rear Panel Indicators Figure 1-2. Rear Panel of IPX-1900 1 12V DC 12V DC Power input outlet 2 Reset The reset button, when pressed, resets the IP PBX without the need to unplug the power cord. Front Panel LED St ate Descriptions PWR On Off PBX [...]

9 3 WAN The WAN port supports auto negotiatin g Fast Ethernet 10/100Base-TX networks. This po rt allows your IP PBX to be connected to an Internet Access device, e.g. router, cable modem, ADSL modem, through a CAT.5 twisted pair Ethernet cable. 4 LAN The LAN port allows your PC or Swit ch/Hub to be connected to the IP PBX through a CAT.5 twisted pa[...]

2 Chapter 2 Prep arations & Inst allation Physical Inst allation Requirement This chapter illustrates ba sic installation of IP PBX • Network cables. Use stand ard 10/100Base-TX network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and either o[...]

In order to connect machine for administration, please Í Note locate your PC in the same net work segment (192.168.0.x) of IP PBX. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations. Network Interface quick configurations Wizard is a to[...]

¾ Step2. NAT Setting LAN IP Setting LAN IP Address Private IP addre ss for connecting to a local private network. (Default: 192.168.0.1) Subnet Mask Subnet mask for the local private network (Default: 255.255.255.0) DHCP Server Enable to open LAN port DHCP server Assigned DHCP IP Address DHCP server range from start IP to end IP DHCP IP Lease Time[...]

Figure 2-4. Wizard-IP PBX settings Service Provider: Caller ID Service provider name Username Input Provider name Password Input Provider passwo rd Host Input Providers server address Port Providers server port T able 2-3. Service provider description User Extensions: User Extension Input Extension number Password Input Extension password Caller Id[...]

Figure 2-5. Wizard-Rebooting Please consult your ISP personnel to obtain proper PPPoE/IP Í Note address related information, and input carefully. If Internet connection cannot be established, please check the physical connection or contact the ISP service staff for support information. RS-232 Console Port Configuration RS-232 port (DB-9pin Fem ale[...]

4. Create new connection. Select “COM ” p ort that connect PC to gateway Figure 2-7. Hyper T erminal Screen 5. Make connection(B its Pre second: 57600 Flow contact: None ) 6. Input “Enter” and Show Welcome display. 7. Login, input the Password to login.(Passwor d as the same as Access, default is admin) 8. Setting Gateway Configure like tel[...]

Chapter 3 IP PBX Setup SIP Basic Setting SIP (Session Initiation Protocol) is a request-resp onse protocol, dealing with requests from clients and responses from serve rs. Particip ants are identified by SIP URLs. Requests can be sent through any transport protocol. SIP determines the end syst e m to be used for the session, the communi cation medi[...]

Max Registration Time Maximum duration of incoming regi stration/subscri ptions we allow. Default 3600 seconds. Min Registration Time Minimum duration of registrati ons/ subscriptions. Default 60 seconds Default Incoming/Outgoing Registration Time Default duration (in seconds) of incomin g / outgoing registration. Min RoundtripTime (T1 Time) Minimu[...]

Register TimeOut Retry registration calls at every 'x' seconds (d efault 20). Register Attempts Number of registration attempts before we give u p; 0 = continue forever. T able 3-2. Outbound DIP registration description ¾ NAT Support The externip , externho st and localnet settings are used if you use IP PBX behind a NAT device to commun[...]

User Extensions Setup ¾ Extension List Figure 3-5. User extension settings Advance Click to edit an extension other setting. Delete Click to delete an extension. T able 3-5. User extension description ¾ Advance Setup Figure 3-6. Extension advance settings 19[...]

20 User Extension Input Extension number Password Input Extension password Caller Id Input Extension caller id T able 3-5. Extension advance descriptio n - Call group / Pickup group select : Call Group An Extension can set single/multiple call group(s) 1 -10 id Pickup Group An Extension can set single/multiple Pickup group(s) 1-10 id T able 3-6. Ca[...]

Figure 3-7. Server Providers Setting ¾ Add New Service Pro viders Step 1. Press “ Add ” button to add an new service p rovider information. Figure 3-8. A dd new service providers Step 2. Fill in the required information in Se rvice Provider Advance Setup page. Figure 3-9. Service provider advance setup Caller id The caller ID will be sent betw[...]

Registrar Server Port Port number of SIP Register Server. Assigns a value from 1024 to 65535, the common default SIP port is 5060. Outbound Proxy Address Outbound Proxy server’s IP address / Domain name. Assign a server’s IP / Domain name which is in charge of call-out service. Outbound Proxy Port Port number of Outbound Proxy Server. A ssign a[...]

Press “Advance” to Edit an FXO Prot as below Figure 3-1 1. FXO T runk list Figure 3-12. FXO Advance setting Port Num Analog Port Number (System Define) Caller id The caller ID will be sent between the callee and caller and will be displayed on SIP device LCD panel for identification. DID Any calls originating from the regist ered I TSP to IP PB[...]

Trunk Management – Gateway Trunk Gateway Trunk Setting all ows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If the FXO ports of external Gateway have connect ed with PSTN lines, the user can make outgoing PSTN calls via external Gateway by this function. Figure 3-13. Gateway T runk setting IP Destination IP Address is the IP [...]

¾ Add New Trunk Group Step 1. Press “ Add ” button to add an new Group Name information. Figure 3-17. Add an ne w Group Name Step 2. Fill in the required information in Trunk G roup Setup page. Figure 3-18. T ru nk Group Setup Group Name The Trunk Group name Number If the leading digits are match with this number, IP PBX will delete this numbe[...]

One-St age Call: 1. If user dials 81 123456, this call will hunt SIP_T runk_1 and send 12 3456 to call out. 2. If user dials 82 234567, this call will hunt SIP_T runk_2 and send 23 4567 to call out. 3. If user dials 0 345678, this call will h unt FXO_Gateway and send 345678 to call out. T w o-St age Call: 1. If user dials 81 and hear the dial tone,[...]

¾ Scenario Sample Example I: Phone Pattern Figure 3-21. Dialing Rules list - 1 1. 1N (N: single digit from 2~9, excl. 0 and 1) In this example, when the calle r (User/IP-Phone) dial the number range from “12 to 19” , iPBX / WiPBX will send the call to SIP Proxy Server 2. 2Z (Z: single digit from 1~9, excl. 0) In this example, when the calle r [...]

2. When User / IP-Phone call “094 3123123”, iPBX will automatically dial “0943123123” to SIP Proxy Server. 3. When User / IP-Phone call “43123123”, iPBX will au tomatically dial “0943123123” to SIP Pr oxy Server. How to setting call out by SIP trunk / FXO (PSTN)trunk / Gateway trun k ? Step 1. Creat e SIP T runk or Gateway T runk 1.[...]

Figure 3-25 IP PBX T runk group - 1 2.2 Group number “002” m eans you want Group these 4 Gateway T ru nks (GW_T runk_A) Figure 3-26 IP PBX T runk group – 2 Group number “003” means you want Group these 4 FXO (PSTN) T runk (PS TN_T runk_C) Figure 3-27 IP PBX T runk group - 3 29[...]

Step 3. S tart to call by SIP trunk / FXO (PSTN) T runk / Gateway trunk ( 一 )One-S t age call by SIP trun k Example : Call out and hunt “ SIP_T runk_1 “ SIP T runk P i c k u p t h e I P P H O N E D ial “0 01xxxxxxxxxxxxxxxxxxx x” This call will hunt “ SIP_T runk_1 ” SIP T runk 1 – 4 to call out ( 二 )T wo-S tage call by SIP trun k [...]

¾ Sample: Figure 3-29. Auto-attend ant sample Attendant Message The Attendant Message on the IPBX systems, it is can auto-answer attendant message setting on the attendant time, IPBX message can play voice to SIP T runk and Gateway's FXO, and FXS port. Figure 3-30. Auto-attend ant message Attendant Message Adv ance Setting : Figure 3-31. Auto[...]

G.11( .gsm ) You can upload gsm format voice file to I PBX. Service Number A ssociate a dial numbe r with a call group voice instruction to instruct incoming calls Ext/Hunt Group Specificity the call group hunting. T able 3-14. Attendant Me ssages setup description Attendant Time Defined Attendant T ime o n the IPBX systems, it is can answer attend[...]

Day Setting Defined Start Day / End Day. Time Setting Defined Start Time / End Time. Month Setting: Defined Start Month / End Month . Date Setting Defined Start Date / End Date. Message Select play voice message. Auto Attendant Serv ice Method Defined the Auto Attendant Service Method. a). Always play attendant messages b). Always goto EXT/HuntGrou[...]

Upload Voice File This page allows transfer music on hold file or PBX Voice Files from your PC to IPBX. Figure 3-35. On-hold voice uploads Click Browse and select your file, then click upload to finish . Figure 3-36. Answer exten sion voice upload Answer extension Call from registered IP-Phone to record the voice menu. Sound File Select G.711 Voice[...]

Extension to Dial for Parking Calls Set an extension number to dial when need to park the call. Default number is 700 . What extension to park calls on Set the Extensi on range for call parking retrieving. ( Example : '701-720'). Number of seconds a call can be parked for Set allowed parking time for the parking call. Default is 30/sec. P[...]

¾ Transfer Feature Figure 3-39. T ransfe r feature settings Attendant Transfer When you attendant transfer fail, you can definition other transfer number Blind Transfer Blind Transfer , When Ex: Ext 100 call Ext 200, Ext 200 blind transfer to Ext 300 , Ignore the Ext.300 status, the Ext.200 will immediately on-hook Transfer Digit time out Set (Att[...]

¾ SMTP Setting SMTP is a rel atively simple, text-based protocol, where one or more recipient s of a message are specified. Input the valid account number , the extension setting voice mail will be been in used. Figure 3-41. SMTP setting s SMTP server IP / Address Input server IP / Address SMTP Authentication us er name Input SMTP Authentication u[...]

Figure 3-43. Hunt Group list Figure 3-42. Hunt Group more informat ion ¾ Add New Hunt Group Step 1. Press “ Add ” button to add a new Group Name information. Figure 3-43. Add an ne w Group Name Step 2. Fill in the required information in Hunt Group S etup page. Figure 3-44. Hunt Group setup Group Name Input your group name Hunt Mode There are [...]

A, when the caller dial “20”, all extensions un der Group A will ring). Default incoming call dial number i s empty . Ring (Group/Extension) Timeout Setup a timeframe to control the call group hunting timeout. Default setting is 30 sec . T able 3-25. Hunt Group description ¾ To add extension/users to Ring group Step 1. Select your extensi on F[...]

4 Chapter 4 Network Setup W AN & LAN Setup WAN (Wide Area Network) is a netwo rk connectio n connecting one or more LANs together o ver some distance. For example, the means of connectin g two office buildings separated by several kilometers would be referred to as a WAN connection. The si ze of a WAN and the numbe r of distinct LANs connected [...]

¾ Static IP If you are a leased line user with a fixed IP addre ss, enter in the IP address, subnet mask, gat eway address, and DNS (domain nam e server) add ress(es) provided to y ou by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will not acc[...]

Figure 4-3. W AN-DHCP settings ¾ PPPoE Point-to-Point Protocol over Ethernet (PPPoE). Some ISPs provide DSL-based services an d use PPPoE to establish communication link with end-users . If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you need to make sure the following items, PPPo[...]

called www.IP-PBX.com . When we need to find the host name from an IP address we send a request to the host using its IP address. The ho st will respond with its host name. ¾ WAN Port MAC The MAC (Media Access Control) Add ress field is re quired by some Internet Service Providers (ISP). The default MAC address i s set to the MAC address of the WA[...]

Figure 4-6. MTU and MRU setting s For Static IP, both MTU and MRU are set to 1500 bytes as default value. Í Note For DHCP, both MTU and MRU are set to 1500 bytes as default value. For PPPoE, both MTU and MRU are set to 1492 bytes as default value. ¾ DNS Server DNS stands for Domain Name System. Every Interne t host must have a unique IP address; [...]

¾ LAN Setting These are the IP settings of the LAN (Local Area Netw ork) interface for the dev ice. These settings may be referred to as "private settings". You may c hange the LAN IP address if needed. The LAN IP address is private to your internal network an d cannot be seen on the Internet. The default IP address is 192.168.0.1 with a[...]

Expired Time of the DHCP lease for each client computer. DHCP Server is a useful tool that automates the assignment of IP addresses to numbers of comput ers in your network. The server maintains a pool of IP addresses that you use to create scopes. (A DHCP scope is a collection of IP addresses and TCP/IP configuration parameters that are availabl e[...]

Static Route S t atic routes are special routes that the network administrator manually enters into the route r configuration for local network m anagement. Y ou coul d build an entire network based on st atic routes. The problem with doing this is that when a netwo rk failure occurs, the st atic route will not change without you performing the cha[...]

Figure 4-13. NA T settings ¾ NAT Setting Figure 4-14. NA T settings Network Address Translation Enable/Disable NAT. IPSec Pass Through IPsec (Internet Protocol Security) is a framework for a set of protocols for security at the network or packet proce ssing layer of network communication. Enable/Di sable this framework verification. PPTP Pass Thro[...]

49 L2TP Pass Through L2TP (The Layer 2 Tunne l Protocol) is an emerging Internet Engi neering Task Force (IETF) standard that combine s the best features of two existing tunneling protocols: Cisc o's Layer 2 Forwarding (L2F) and Microsoft's Point-to-Point Tunneling Protocol (P PTP). L2TP is an extension to the Point-to-Point Protocol (PPP[...]

Figure 4-15. Vi rtual server mapping settings Enable Enable/Disable the virtual server mappi ng, default setting is Disable. WAN Port The port number on the WAN side that will be used t o access the virtual service. Enter the WAN Port number, e.g. enter 80 to represent the Web (http server), or enter 25 to represent SMTP (email server). Note: You c[...]

Trigger Type This is the protocol used to trigger the special appli cation. Public Port This is the port numbe r on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port range s. Public Type This is the protocol used for the special application. [...]

52 Block Wan IP Port Block time setting. Select Always or By Schedule. Day Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./ Tues./ Wed./Thu./Fri./Sat./Sun. Time Block Time setting, select time range is 00:00 to 23:5 9. T able 4-9. Packet filter-W AN description ¾ LAN LAN Enable/Disable Internet to LAN filter function, default setting is [...]

Figure 4-18. URL filter settings Enable Enable/Disable the URL filter function , default setting is Disable. Enable Enable/Disable Block URL to the Clinet IP, default setting is Disable Client IP This is the Clinet IP is LAN address. Example: 192.168.0.100 URL Filter String This is the filter URL. Example : “http://www.yahoo.com/” T able 4-12. [...]

UPnP UPnP provide s support for communication between control p oints and devices. The network media, the TCP/IP proto col suite and HTTP provide basic net wo rk connectivity and addressing needed. On top of these open, standard, Internet based pro tocols, UP nP defines a set of HTTP servers to handle discovery , description, contro l, events, and [...]

Figure 4-21. DDNS settings Enable Enable/Disa ble the DDNS service, default setting is Disable. DDNS Server Ty pe The IP-PBX support two types of DDNS, DynDns.org or No-IP.com DDNS Username The usernam e which you register in DynDns.or g or No-IP.c om website. DDNS Password The password which you register in Dy nDns.org or No-IP.com website. Confir[...]

. Figure 4-22. SNMP setting s Enable Enable/Disable the SNMP servic e, default setting is Disable. (Support SNMP version 1 or SNMP version 2c). SNMP Read Community SNMP Read Community string so that EPICenter can retrieve information.(default :public) SNMP Write Community Specifies the name of the SNMP write community to which the printer device th[...]

5 Chapter 5 Management Admin Account The administrator account can acce ss the manag ement interface through the web bro wser. Figure 5-1. Management settings Administrator Name Assign a name to represent the administrator a ccount. Maximum 16 characters. Legal characters can be the upper letter “A” to “Z”, lower letter “a” to “z”, [...]

z The administrator name and password are case-sensitive and the “blank” character is an illegal character z Only the administrator account has the ability to change account password. Í Note Date & Time ¾ Manual Time Setting Figure 5-2. Date/T ime-Manual time settings Manual Time Setting Set up the time manually. T able 5-2. Date/T ime-Ma[...]

Time Zone Choose your time zone, Default is (GMT+8:00) Beiji ng, Singapore, Taipei. Daylight Saving Enable / Disable. Default is Disabling, time during which cl ocks are set one hour ahead of local st andard time; widely adopted during summer to provide extra daylight in the evenings. NTP Update Interval Default is 24 hours; Thi s is used to select[...]

Factory Default This function is used to restore all the parameters back to factory d efault setting. You can use the Save/Restore Setting to check the factory default c onfiguration, after you click on the Set button. Figure 5-6. Factory default settings Firmware Update Y ou can upgrade the firmware of the device using this t ool. Make sure that t[...]

6 Chapter 6 Information System Information System Information pag e indicates the current setup-status of the device, it includes LAN, WAN, (Status and MAC Address), Host Name / System Date time / Machines Life time and syste m firmware information. The information and options on this page will vary according to your WAN setting (Static IP, DHCP, o[...]

PBX Extension Status This page displays the info rmation of Extension/Users Registration statu s. Figure 6-2. Extension S tatus Register OK SIP device is connected to IPPBX Talk on the telephone The connection from/to the other en d of SIP device is established. Register Unknown Sip devic e is not connected to IPPBX T able 6-1. Extension S t atus d[...]

Call Detail Record Call Det ail Record (CDR) cont ains the call history of the extens ions when calls was made or received. Recorded information incl ude: Source Number , Dest ination Numb er , S t art T ime, Answer T ime, End T ime, Duration Ti me and S tatus. Figure 6-4. Call Detail Record Press to go to the Next page; Press to go to the Previous[...]

Appendix A How to use Call Parking function The followings are the Cal l Park function settings, and all of VoIP devices (ATA , GW and IP Phone) were registered with Wi-Fi IP PBX. ¾ Extension to Dial fo r Parking Calls: 700 ¾ Extensions to park calls on :701-7 20 Figure A-1. Call Parking sa mple scenario 1. Ext.100 and Ext.300 are talking. 2. Ext[...]

Appendix B How to use Call Pick-up function The followings are the Call Pickup function setting s, and all of VoIP devices (ATA, GW and IP Phone) were registered with IP PBX. ¾ Pickup Extension: *8 Figure B-1. Call Pickup sample scenario 1. Ext.300 call to Ext.100, and Ext.100 is ringing. 2. Ext.200 dial “ *8# ” to pickup the call for Ext.100,[...]

Appendix C Record Sound Sample This sample for how to record soun d, as gsm format file for ipbx series use. A) Visit to www . nch.com.au sound home-page, to downl oad Wave pad v3.05 (for windows) sou nd tools install your pc. B) In this screen, create a new file , Input 8000Hz a nd select mono (Single) channel then press ok to finish. C) Press F5 [...]

D) Press S tart recording E) Save the current file as W A V or gsm format to finish. ¾ Convert Wav to G729 format Example A) Visit to www .voiceage.com home-pag e, to download Open G729 encoder sound tools uncompress to your pc. B) Convert W A V format file to g729 format file. 67[...]

Appendix D Record V oice Guide Process IPX-1900 provides Record Voice Menu by Phone function. Plea se register your VoIP devices to Wi-Fi IP PBX at first, and then check the Record voice code from “ IP PBX Setup -> record Voice Menu ” page. Figure C-1. Record voice menu settings VoIP devices dial *9 to entry the Reco rd Voice Menu, then refe[...]

Appendix E V oice Communication Samples The chapter shows you the concept and command to help you configur e your IP PBX System through sample configuration. And provide several ways to ma ke calls to desired destination in IP PBX. In this section, we’ll lead you step by st ep to est ablish your first voice communication via web browsers operatio[...]

STEP 2: Click the “ Add ” button to create extensi on account ex t.100 and ext.101. Figure D-4. Add extens ion setting of IP PBX STEP 3: Please log in VIP-254T_B and browser to “ SIP settin g Æ Domain Service ” configuration menu. Insert the account/password informatio n then save and reboot machine. The sample co nfiguration screen is sho[...]

STEP 5: After both of devices have registered to IP PBX successfully , it could browse to “ Information -> PBX Extension S tatus ” p age to show the registratio n status: Figure D-8. Extension status ¾ Test the Scenario: 1. VIP-254T_B pick up the telephone 2. Dial the number: 100 shall be able to co nnect to the VIP-254T_A 3. Then the VIP-2[...]

¾ Machine Configuration: STEP 1: Please refer to the first sample and let VIP-154T and VIP-192 register to IP PBX. STEP 2: Please log in IP PBX via w eb browser and browse to “ IP PBX Setup Æ User Extensions Setup ” configuration menu to add four a ccounts for VIP-480FO usin g. Figure D-10. Add accounts for VIP-480FO STEP 3: Browse to “ IP [...]

STEP 4: Browse to “ IP PBX Setup Æ T runk Management Æ Gate w ay T runk ” configuration menu. Fill in the IP addre ss of VIP-480FO for connectin g wi th VIP-480FO by peer-to-peer mode, and press the “ Insert ” button for activate the configurat ion. Figure D-12. Add a Gateway trunk for connecting with VIP-480FO STEP 5: Browse to “ IP PB[...]

Figure D-15. Set up the Hunt ing Member of FXO ports Figure D-16. Set up the Proxy Server IP address for register to IPX-1900 STEP 7: Browse to “ Dialing Plan ” configuration menu. Add an Incoming Di al Plan (no.1x) for redirect the PSTN outgoing calls to FXO port s. Figure D-17. Add an incoming dial plan STEP 8: Browse to “ Port Status ” c[...]

Figure D-18. Hot Line to auto-attendant of IPX-1900 STEP 8: After all of devices have registered to IP PBX successfully , the Extension St atus page will show the registration st atus: Figure D-19. Extension status page with Phone and Gateway regi stered ¾ Test the Scenario: 1. VIP-154T pi ck up the telephone 2. Dial the number: 0 will hear the di[...]

IP Phone make external SIP Proxy calls via SIP Trunk In the following samples, we’ll introduce VIP-154T and VIP-192 makes SIP Proxy calls via SIP T runk applications. Figure D-20. Installation example with FWD SIP Prxoy ¾ Machine Configuration: STEP 1: Please refer to the first sample and let VIP-254T and VIP-255PT register to IP PBX. STEP 2: Br[...]

STEP 3: Browse to “ IP PBX Setup Æ T runk Manag ement Æ T runk Group ” config uration menu. Add a T runk Group for making external SIP Proxy calls. Figure D-22. Add Trunk Group numbe r STEP 4: After the SIP T runk has registered to FWD SIP Proxy successfully , the Service Provider St atus page will show the registration st atus: Figure D-23. [...]

Appendix F IPX-1900 Series S pecifications Product Internet T elephony PBX System Model IPX-1900 Hardware LAN 1 RJ-45 (10/100Base-TX , Auto-Sensing/Switching) WAN 1 RJ-45 (10/100Base-TX , Auto-Sensing/Switching) Standards and Protocol Call control SIP 2.0 (RFC3261 ) , SDP (RFC 2327), Symmetric RTP Registration Max. 300 nodes / SIP IP phones/ A T A [...]

79 Internet Sharing Protocol TCP/IP, UDP/RTP/RTCP, HTTP , ICMP, ARP, NAT, DHCP, PPPoE, DNS Advanced Function NAT/Bridge mode, DHCP server, Static Route, DMZ, Virtual Server, Port Trigger, Packet / URL Filter, UPnP, DDNS, SNMP, Ping test Network and Configuration Connection Type Static IP, PPPoE, DHCP Management HTTP Web Browser LED Indications Syst[...]

80 Appendix G IPX-1900 Module Card Specifications IPX-19FO Card Technical Specifications Signaling Loop St art / DTMF No. of channels 2 Interface Connectors 2 RJ-1 1 2-pin modular jacks AC Impedance Selection 600 Ω /900 Ω / Global Impedance / Sixteen Impedance for selection. Receive Frequency Response Low –3 dBFS Corner , FIL T = 0 , 5 Hz Low ?[...]

FXO Port Pin Assignments The FXO Telephony Interface has 2 RJ-11C/W modular jacks. The following diagram and table show the assignments of the pin for the R-J11 port. 81 RJ-1 1pin Signal 1 2 Tip 3 Ring 4 12 3 4 FXS Port Pin Assignments The FXS Telephony Interface has 4 RJ-11C/W modular jacks. The following diagram and table show the assignments of [...]

EC Declaration of Conformity For the following equipment: *T ype of Product : Internet T elephony PBX system *Model Number : IPX-1900 * Produced by: Manufacturer‘s Name : Planet T echn ology Corp. Manufacturer‘s Address: 1 1F , No 96, Min Chuan Road Hsin T ien, T aipei, T aiwan, R. O.C. is herewith confirmed to comply with the requi rem ents se[...]