English dropdown-ico

PSC LINEAR IMAGER 7000 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of PSC LINEAR IMAGER 7000, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of PSC LINEAR IMAGER 7000 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of PSC LINEAR IMAGER 7000. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of PSC LINEAR IMAGER 7000 should contain:
- informations concerning technical data of PSC LINEAR IMAGER 7000
- name of the manufacturer and a year of construction of the PSC LINEAR IMAGER 7000 item
- rules of operation, control and maintenance of the PSC LINEAR IMAGER 7000 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of PSC LINEAR IMAGER 7000 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of PSC LINEAR IMAGER 7000, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the PSC service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of PSC LINEAR IMAGER 7000.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the PSC LINEAR IMAGER 7000 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    PowerScan ® 7000 Linear Imager Product Reference Guide[...]

  • Page 2

    PSC Inc 959 T err y Street Eugene, Oregon 97402 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All r ights reser ved. No part of the contents of this documenta- tion or the procedures described therein may be reproduced or transmitted in an y f or m or by any means without prior written per mission of PSC Inc. or its wholly [...]

  • Page 3

    Product Reference Guide i Table of Contents About This Manual ............................................................................ 1-1 Manual Conventions .................................................................... 1-2 Connecting the Scanner ..................................................................... 1-2 Programming ......[...]

  • Page 4

    ii PowerScan ® 7000 Wand Idle State .................................................................. 3-34 Signal Speed ....................................................................... 3-36 Transmit Leading Noise ........................................................ 3-37 Symbology Conversion .............................................[...]

  • Page 5

    Product Reference Guide iii Code 39 ........................................................................................ 5-30 Disable/Enable Code 39 ............................................................. 5-30 Check Character Calculation ....................................................... 5-30 Check Character Transmit ................[...]

  • Page 6

    iv PowerScan ® 7000 Code 93 Length 1, Length 2 Pr ogramming Instructions .................. 5-69 Code 93 Stitching ...................................................................... 5-70 Minimum Reads ........................................................................ 5-71 MSI/Plessey ......................................................[...]

  • Page 7

    Product Reference Guide 1-1 Chapter 1 Getting Started The P o werScan ® 7000 Linear I mager marks a new per formance level for handheld scanners. I t delivers aggressive read rates and depths of field on 1D and stacked codes. This aggressiv eness applies even in challenging reading envir onments where lo w ligh ting conditions and poor quality mig[...]

  • Page 8

    Getting Started 1-2 PowerScan ® 7000 Linear Imager Manual Conventions The symbols listed below ar e used in this manual to notify the reader of key issues or procedures that must be observed when using the scanner: Connecting the Scanner U se the appropriate instructions below to connect the scanner to the ter- minal, PC or other host device. The [...]

  • Page 9

    Connecting the Scanner Product Reference Guide 1-3 Figure 1 . RS-232 Serial Connection USB Connection — Connect the scanner to a USB port on the termi- nal/PC using the correct USB cable fo r the interface type you order ed. Ref ere n ce Figure 2 . Figure 2. USB Connection Captiv e Screws Retainer Boss Cable Connector U S B I B M K e y b o a r d [...]

  • Page 10

    Getting Started 1-4 PowerScan ® 7000 Linear Imager Wand Emulation Connection — Connect the scanner to the appro- priated port on the terminal/PC usin g the correct cable for the interface typ e yo u o rdere d. Refe ren ce Figure 2 . IBM Connection — Connect the scanner to the IBM port on the ter- minal/PC using the correct IBM cable. R eferenc[...]

  • Page 11

    Product Reference Guide 2-1 Chapter 2 General Features Double Read Timeout The Double Read Timeout f eature sets a time limit that deter mines how much time must pass bef ore reading the same label again (e.g. two identical items in succes- sion). ST AR T DURA TION BARCODE 0.1 Second 0.2 Second 0.3 Second 0.4 Second[...]

  • Page 12

    General Features 2-2 PowerScan ® 7000 Linear Imager Double Read Timeout — continued ST AR T DURA TION BARCODE 0.5 Second 0.6 Second 0.7 Second 0.8 Second 0.9 Second 1 Second END ³0 0 4 D 4 6[...]

  • Page 13

    Powerdown Timeout Product Reference Guide 2-3 Powerdown Timeout The P owerdo wn Timeout feature sets the time f or automatically switching the unit off when the scanner is not in use. ST AR T DURA TION BARCODE Disable 5 Seconds 15 Seconds 30 Seconds 1 Minute 2 Minutes[...]

  • Page 14

    General Features 2-4 PowerScan ® 7000 Linear Imager Powerdown Timeout — continued ST AR T DURA TION BARCODE 3 Minutes 4 Minutes END[...]

  • Page 15

    LED and Beeper Indicators Product Reference Guide 2-5 LED and Beeper Indicators Power On Alert Disables or enables the indication (from the B eeper) that the scanner is receiving po wer . ST AR T ST A TE B ARCODE Disable Enable END[...]

  • Page 16

    General Features 2-6 PowerScan ® 7000 Linear Imager Good Read: When to Indicate This feature specifies when the scanner will pro vide indication (beep and/or flash its green LED) upon successfully r eading a bar code. Choices are: • Good R ead = Indicate after decode • Good R ead = Indicate after transmit • Good R ead = Indicate after CT S g[...]

  • Page 17

    LED and Beeper Indicators Product Reference Guide 2-7 Good Read Beep Control This feature enables/disables the scanner ’ s ability to beep upon a success- ful decode of a bar code. ST AR T ST A TE B ARCODE Disable Enable END[...]

  • Page 18

    General Features 2-8 PowerScan ® 7000 Linear Imager Good Read Beep Frequency Adjusts the good r ead beep to sound at a selectable low , medium or high frequency , selectable from the list below . (Controls the beeper’ s pitch/ tone.) ST AR T FREQUENCY BARCODE Low Medium High END[...]

  • Page 19

    LED and Beeper Indicators Product Reference Guide 2-9 Good Read Beep Length S pecifies the duration of a good read beep. ST AR T LENGTH BARCODE 60msec 80msec 100msec 120msec 140msec 160msec[...]

  • Page 20

    General Features 2-10 PowerScan ® 7000 Linear Imager Good Read Beep Length — continued ST AR T LENGTH BARCODE 180msec 200msec END[...]

  • Page 21

    LED and Beeper Indicators Product Reference Guide 2-11 Good Read Beep Volume Selects the beeper v olume (loudness) upon a good read beep . There are three selectable volume levels. ST AR T V OLUME BARCODE Low Medium High END[...]

  • Page 22

    General Features 2-12 PowerScan ® 7000 Linear Imager Scanning Features Scan Mode Selects the scan operating mode for the scanner . Selections are: • Single — When the trigger is pull ed, scanning is activ ated until five seconds have elapsed or a bar code has been r ead or the trigger is released • T riggerless — When the trigger is pulled[...]

  • Page 23

    Scanning Features Product Reference Guide 2-13 Scan Mode — continued ST AR T MODE BARCODE Single T rigger less Stand Stand w/Illum END[...]

  • Page 24

    General Features 2-14 PowerScan ® 7000 Linear Imager Active Scanning Time This setting determines the amount of time the scanner continues to scan in triggerless or stand mode (see Scan Mode ) once scanning has been activated. ST AR T DURA TION BARCODE 1 Second 2 Seconds 5 Seconds 15 Seconds 30 Seconds 1 Minute[...]

  • Page 25

    Scanning Features Product Reference Guide 2-15 Active Scanning Time — continued ST AR T DURA TION BARCODE 2 Minutes 3 Minutes 4 Minutes END[...]

  • Page 26

    General Features 2-16 PowerScan ® 7000 Linear Imager Laser Pointer Control When the trigger is pressed and Scan Mode is set to Single , the laser pointer will be activated for the time period configured by this featur e. Immediately follo wing this, the scan ner will star t scanning. Disabling this feature turns the pointer off . NO TE The Laser P[...]

  • Page 27

    Scanning Features Product Reference Guide 2-17 Laser Pointer Control — continued ST AR T DURA TION BARCODE 0.5 Seconds 0.6 Seconds 0.8 Seconds 1 Second 1.2 Seconds 1.5 Seconds[...]

  • Page 28

    General Features 2-18 PowerScan ® 7000 Linear Imager Laser Pointer Control — continued ST AR T DURA TION BARCODE 2 Seconds 2.5 Seconds END[...]

  • Page 29

    Product Reference Guide 3-1 Chapter 3 Interface Related Features At the time of this writing, the Scan ner supports the interfaces listed in Ta b l e 3 - 1 . Select the desir ed inter face type from the table, then reference the page number given for the customizable features section associated with each interface. See Ta b l e 3 - 2 for a descript[...]

  • Page 30

    Interface Related Features 3-2 PowerScan ® 7000 Linear Imager Table 3-1. Interfaces Supported RS-232 P age K eyboard W edge P age RS-232 Standard 3-10 K eyboard W edge H a RS-232 Wincor-Nixdorf 3-10 K eyboard W edge I a 3-40 IBM K eyboard W edge J a 3-40 IBM 4683 P or t 5B 3-31 K eyboard W edge K a 3-40 IBM 4683 P or t 9B 3-31 K eyboard W edge L a[...]

  • Page 31

    Product Reference Guide 3-3 Table 3-2. Keyboard Wedge Interface Reference I/F T ype PCs Supported A PC/XT w/Alter nate K ey Encoding B A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alter nate K ey Encoding C PS/2 25 and 30 w/Alter nate K ey Encoding D PC/XT w/Standard K ey Encoding E A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 9[...]

  • Page 32

    Interface Related Features 3-4 PowerScan ® 7000 Linear Imager Interface Selection ST AR T INTERF ACE BARCODE RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 Po r t 5 B IBM 4683 Po r t 9 B IBM 4683 Po r t 1 7 IBM USB USB K eyboard[...]

  • Page 33

    Interface Selection Product Reference Guide 3-5 Interface Selection — cont. ST AR T INTERF ACE BARCODE K eyboard W e dge A K eyboard W e dge B K eyboard W edge C K eyboard W edge D K eyboard W e dge E K eyboard W edge F K eyboard W edge G[...]

  • Page 34

    Interface Related Features 3-6 PowerScan ® 7000 Linear Imager Interface Selection — cont. ST AR T INTERF ACE BARCODE K eyboard W edge H K eyboard W edge I K eyboard W edge J K eyboard W edge K K eyboard W edge L K eyboard W edge M K eyboard W edge N[...]

  • Page 35

    Interface Selection Product Reference Guide 3-7 Interface Selection — cont. ST AR T INTERF ACE BARCODE K eyboard W edge O K eyboard W e dge P K eyboard W edge Q K eyboard W edge R K eyboard W e dge S K eyboard W edge T[...]

  • Page 36

    Interface Related Features 3-8 PowerScan ® 7000 Linear Imager Interface Selection — cont. Interface Features ST AR T INTERF ACE BARCODE K eyboard W edge U K eyboard W e dge V K eyboard W edge W K eyboard W e dge X W and Emulation END[...]

  • Page 37

    Interface Features Product Reference Guide 3-9 Global Interface Features ST AR T ST A TE B ARCODE Obey Host Commands Ignore Host Commands Host T ransmission Buff ers = 1 Host T ransmission Buffers = 2 END[...]

  • Page 38

    Interface Related Features 3-10 PowerScan ® 7000 Linear Imager RS-232 Interface Features ST AR T BA UD RA TE BARCODE 1200 Baud 2400 Baud 4800 Baud 9600 Baud 19200 Baud 38400 Baud[...]

  • Page 39

    Interface Features Product Reference Guide 3-11 RS-232 Interface Features — cont. ST AR T BA UD RA TE BARCODE 57600 Baud 115200 Baud END[...]

  • Page 40

    Interface Related Features 3-12 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE 7 Data Bits 8 Data Bits 1 Stop Bit 2 Stop Bits P arity = None[...]

  • Page 41

    Interface Features Product Reference Guide 3-13 RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE P ar ity = Ev en P ar ity = Odd END[...]

  • Page 42

    Interface Related Features 3-14 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. Hardware Flow Control Di s a bl e Ha rd w a re C on t r o l — The scanner transmits to the host regar dless of any activity on the CTS line. Enable CT S Flow Contr ol — The CTS signal contr ols transmission of data to the host. Enable CT S Scan C[...]

  • Page 43

    Interface Features Product Reference Guide 3-15 RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE Disable Hard ware Control Enable CTS Flow Control Enable CTS Scan Control Inter-Char Delay = No Delay Interchar Dela y = 10 msec Interchar Dela y = 20 msec[...]

  • Page 44

    Interface Related Features 3-16 PowerScan ® 7000 Linear Imager Interchar Dela y = 30 msec Interchar Dela y = 40 msec Interchar Dela y = 50 msec Interchar Dela y = 60 msec Interchar Dela y = 70 msec Interchar Dela y = 80 msec RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE[...]

  • Page 45

    Interface Features Product Reference Guide 3-17 Interchar Dela y = 90 msec Disable Software Flow Control Enable Software Flo w Control END RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE[...]

  • Page 46

    Interface Related Features 3-18 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. Host Echo When enabled, this feature passes all data through the scanner to the host as it comes in. This feature is used for applications wher e “ daisy chaining” of RS-232 devices onto the same cable is necessary . If, for example, one of the d[...]

  • Page 47

    Interface Features Product Reference Guide 3-19 RS-232 Interface Features — cont. ST AR T ST A TE B ARCODE Disable Host Echo Enable Host Echo Host Echo Quiet Inter v al = 0msec Host Echo Quiet Interval = 10msec Host Echo Quiet Inter v al = 20msec Host Echo Quiet Inter v al = 30msec[...]

  • Page 48

    Interface Related Features 3-20 PowerScan ® 7000 Linear Imager Host Echo Quiet Inter v al = 40msec Host Echo Quiet Inter v al = 50msec Host Echo Quiet Inter v al = 60msec Host Echo Quiet Inter v al = 70msec Host Echo Quiet Inter v al =80msec Host Echo Quiet Inter v al = 90msec Host Echo Quiet Inter v al = 100msec RS-232 Interface Features — cont[...]

  • Page 49

    Interface Features Product Reference Guide 3-21 Beep on ASCII BEL Enables/disables ability of scanner to beep (sound a good read tone) on receiving an ASCII BEL (07 hex). Beep on Not on File Select for the host to beep (or not) when a not-on-file (host command) condition is detected by the host. Signal Vo l t a g e : Normal RS-232 Signal V oltage: [...]

  • Page 50

    Interface Related Features 3-22 PowerScan ® 7000 Linear Imager ACK NAK Options This enables/disables the ability of the scanner to support the RS-232 ACK/NAK pr otocol. When configured, the scanner and/or host sends an “ ACK” when it receives data properly , and sends “NAK” when the data is in error . Selections for this option are: •D i[...]

  • Page 51

    Interface Features Product Reference Guide 3-23 ACK NAK Options — cont. ST AR T ST A TE B ARCODE Disable A CK NAK Enable A CK NAK f or T ransmission Enable A CK NAK f or host- command ackno wledge Enable A CK NAK f or trans- mission and host-command END[...]

  • Page 52

    Interface Related Features 3-24 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. ACK Character ST AR T MODE BARCODE Sets the A CK character from the set of ASCII charac- ters or any decimal v alue from 000 to 255. P ad entries of less than three digits with zeros, as in “005”. T o configure this f eature, scan the “ST ART?[...]

  • Page 53

    Interface Features Product Reference Guide 3-25 RS-232 Interface Features — cont. NAK Character ST AR T MODE BARCODE Sets the NAK character from the set of ASCII charac- ters or any decimal v alue from 000 to 255. P ad entries of less than three digits with zeros, as in “005”. T o configure this f eature, scan the “ST ART” bar code abov e[...]

  • Page 54

    Interface Related Features 3-26 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. Retry on ACK NAK Timeout Enables/disables retry after the configurable ACK NAK T imeout V alue (set in the following featur e) has expired. ST AR T ST A TE B ARCODE Disable Retry on A CK NAK Timeout Enable Retry on A CK NAK Timeout END[...]

  • Page 55

    Interface Features Product Reference Guide 3-27 RS-232 Interface Features — cont. ACK NAK Timeout Value ST AR T MODE BARCODE This item specifies the time the scanner will wait f or an A CK character from the host f ollowing a label transmission. 0 = Infinite timeout 1 - 75 = Timeout in 200-millisecond increments T o configure this feature, scan t[...]

  • Page 56

    Interface Related Features 3-28 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. ACK NAK Retry Count ST AR T MODE BARCODE This f eature sets the number of times for the scanner to retr y a label transmission under a retr y condition. 0 = No retr y 1 - 254 = Retr y f or the specified number of times 255 = Retr y f orev er T o conf[...]

  • Page 57

    Interface Features Product Reference Guide 3-29 RS-232 Interface Features — cont. ACK NAK Error Handling This item specifies the method the scanner will use to handle errors detected while waiting to receive the A CK character from the host. Errors include unr ecognized host commands and communication errors such as parity or framing errors. Choi[...]

  • Page 58

    Interface Related Features 3-30 PowerScan ® 7000 Linear Imager RS-232 Interface Features — cont. Transmission Failure Indication Enables/disables bad-label indication upon transmission failure. ST AR T ST A TE B ARCODE Disable T ransmission Error Indication Enable T ransmission Error Indication END[...]

  • Page 59

    Interface Features Product Reference Guide 3-31 IBM-USB Interface Features IBM-USB Device usage The IBM-USB protocol allows for the sc anner to be identified as one of two different types of bar code scanners. Depending on what other scan- ners you may already hav e connected to a IBM-USB POS, you may need to change this setting to enable all devic[...]

  • Page 60

    Interface Related Features 3-32 PowerScan ® 7000 Linear Imager IBM IBM Transmit Labels in Code 39 Format This feature enables/disables scanner's ability to set a symbol- ogy identifier for a specified label to Code 39 before transmit- ting that label data to an IBM host. This applies to: Code 128, Codabar and Code 93 for IBM USB; Code 128, Co[...]

  • Page 61

    Interface Features Product Reference Guide 3-33 Wand Emulation Supported Symbologies The W and Emulation interface will transmit bar code data as a wand device would. This interface will transmit the following bar code sym- bologies: •U P C / E A N •U P C / E A N w i t h a d d o n s •C o d e 3 9 • F ull ASCII Code 39 • Interleav ed 2 of 5[...]

  • Page 62

    Interface Related Features 3-34 PowerScan ® 7000 Linear Imager Wand Emulation — cont. Bar/Space Polarity Low/H igh — Black will be transmitted as a low v oltage level (0 to +0.7V) and space as high level (+2.4 to +5.25V). H igh/Low — B lack will be transmitted as a high voltage level (+2.4 to +5.25V) and space as low level (0 to +0.7V). Wand[...]

  • Page 63

    Interface Features Product Reference Guide 3-35 Wand Emulation — cont. ST AR T ST A TE B ARCODE W and Idle State = Low W and Idle State = High END[...]

  • Page 64

    Interface Related Features 3-36 PowerScan ® 7000 Linear Imager Wand Emulation — cont. Signal Speed The speed of the transmission can be set. This selects the width of the minimum narro w bar . 330 microseconds 660 microseconds ST AR T ST A TE B ARCODE Signal Speed = 330mS Signal Speed = 660mS[...]

  • Page 65

    Interface Features Product Reference Guide 3-37 Wand Emulation — cont. Transmit Leading Noise The transmission of noise pulses before the bar code may be enabled or disabled. ST AR T ST A TE B ARCODE Disable T railing Noise Enable T railing Noise END[...]

  • Page 66

    Interface Related Features 3-38 PowerScan ® 7000 Linear Imager Symbology Conversion W and Emulation can conver t all bar codes to a single symbology . Choices are: No C o n v e r s i o n Convert to Code 39 Convert to Code 128 ST AR T ST A TE BARCODE Disable Leading Noise Enable Leading Noise No Symbology Con version[...]

  • Page 67

    Interface Features Product Reference Guide 3-39 Symbology Conversion — cont. ST AR T ST A TE BARCODE Conv er t to C39 Conv er t to C128 END[...]

  • Page 68

    Interface Related Features 3-40 PowerScan ® 7000 Linear Imager Keyboard Wedge/USB Keyboard As a keyboard interface, the scanner supports most popular PCs and IBM terminals. The installation of th e wedge is a fairly simple process that doesn ’ t require any changes of softwar e or hardware. Keyboard Layout The Keyboar d Layout option supports ma[...]

  • Page 69

    Interface Features Product Reference Guide 3-41 Keyboard Wedge/USB Keyboard — cont. ST AR T ST A TE B ARCODE F rance Ger many Italy Norwa y P or tugal Spain Sweden[...]

  • Page 70

    Interface Related Features 3-42 PowerScan ® 7000 Linear Imager Keyboard Wedge/USB Keyboard — cont. ST AR T ST A TE B ARCODE Switzerland Japan 106 K e y Hungar y Czech Slov akia Romania[...]

  • Page 71

    Interface Features Product Reference Guide 3-43 Keyboard Wedge/USB Keyboard — cont. ST AR T ST A TE B ARCODE Croatia P oland END[...]

  • Page 72

    Interface Related Features 3-44 PowerScan ® 7000 Linear Imager Keyboard Wedge/USB Keyboard — cont. Caps Lock State S pecifies which format the scanner sends character data. ST AR T ST A TE B ARCODE Disable Caps Lock Caps Lock “ON” Shift Lock “ON” END[...]

  • Page 73

    Interface Features Product Reference Guide 3-45 Keyboard Wedge/USB Keyboard — cont. Keyboard Simulation All PCs check the keyboard status during the po wer-on Selftest. I t is rec- ommended that you enable this function if you ar e working without a keyboard installation. I t simulates keyboar d timing and passes the key- board status to the PC d[...]

  • Page 74

    Interface Related Features 3-46 PowerScan ® 7000 Linear Imager Keyboard Wedge/USB Keyboard — cont. ST ART ST A TE BARCODE Disable Ke yboard Simulation Enable Ke yboard Simulation Disable Control Characters Enable T ransmission of Control Characters Enable Function K ey Mapping END[...]

  • Page 75

    Interface Features Product Reference Guide 3-47 Keyboard Wedge/USB Keyboard — cont. Wedge Quiet Interval Quiet Interval is the amount of time to look for keyboard activity befor e the scanner breaks the keyboar d connection in order to transmit data to the host.. NO TE This feature does not appl y to the USB Ke yboard interface. ST AR T MODE BARC[...]

  • Page 76

    Interface Related Features 3-48 PowerScan ® 7000 Linear Imager Keyboard Wedge/USB Keyboard — cont. Intercharacter Delay NO TE This feature does not appl y to the USB Ke yboard interface. ST AR T MODE BARCODE One-half of the dela y specified below is inser ted between scancodes within each character . If the trans- mission speed is too high, the [...]

  • Page 77

    Product Reference Guide 4-1 Chapter 4 Data Editing Data Editing Overview When a bar code is scanned, addition al information can be sent to the host computer along with the bar code data. This combination of bar code data and supplementary user-d efined data is called a “ message string.” The features in this chap ter can be used to build speci[...]

  • Page 78

    Data Editing 4-2 PowerScan ® 7000 Linear Imager Please Keep In Mind... • M odifying a message string is not a mandator y requirement. Data editing is sophisticated feature allo wing highly customizable out- put for advanced users. F actor y default settings for data editing is typically set to NONE. • A prefix or suffix may be applied (r efere[...]

  • Page 79

    Global Prefix/Suffix Product Reference Guide 4-3 Global Prefix/Suffix — continued Example: Setting a Prefix In this example, we ’l l set a prefix for all symbologies. 1. Determine which ASCII character(s) are to be added to scanned bar code data. In this example, we ’ ll add a dollar sign (‘$’) as a pre- fix. 2. Scan the ST AR T bar code.[...]

  • Page 80

    Data Editing 4-4 PowerScan ® 7000 Linear Imager Global Prefix/Suffix — continued ST AR T MODE BARCODE Sets up to 20 characters each from the set of ASCII characters or any he x value from 0 to FF . T o config- ure this f eature, scan the “ST ART” bar code abo ve to place the unit in Programming Mode , then the “Set Prefix” or “Set Suff[...]

  • Page 81

    AIM ID Product Reference Guide 4-5 AIM ID AIM label identifiers (as opposed to custom characters you select your- self as with label identifiers) can be included with scanned bar code data. AIM label identifiers consist of three characters as follo ws: • A close brace character (ASCII ‘]’), follow ed by ... • A code character (see the table[...]

  • Page 82

    Data Editing 4-6 PowerScan ® 7000 Linear Imager AIM ID — continued ST AR T ST A TE B ARCODE Disable AIM ID Enable AIM ID END[...]

  • Page 83

    Label ID Product Reference Guide 4-7 Label ID A Label ID is a customizable code of up to two ASCII characters (00- FF), used to identify a bar code (s ymbology) type. I t can be appended previous to or follo wing the transmitted bar code data depending upon how this option is enabled. This fe ature pr ovides options for configuring custom Label IDs[...]

  • Page 84

    Data Editing 4-8 PowerScan ® 7000 Linear Imager Label ID — continued ST AR T OPTION BARCODE Label ID T ransmission: Disable Label ID P osition: Before Bar Code Data Label ID P osition: After Bar Code Data Set UPC-A Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: A (41 hex) Set UPC-A w/P2 Addon Label ID Character(s) DEF A UL T SETTING[...]

  • Page 85

    Label ID Product Reference Guide 4-9 Label ID — continued ST AR T OPTION BARCODE Set UPC-A w/C128 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: A (41 hex) Set UPC-E Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) [...]

  • Page 86

    Data Editing 4-10 PowerScan ® 7000 Linear Imager Label ID — continued ST AR T OPTION BARCODE Set EAN-8 w/P5 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: FF (4646 hex) Set EAN-8 w/C128 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: FF (4646 hex) Set EAN-13 Label ID Character(s) DEF A UL T SETTING FOR THIS F[...]

  • Page 87

    Label ID Product Reference Guide 4-11 Label ID — continued ST AR T OPTION BARCODE Set GTIN Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: G (47 hex) Set GTIN w/P2 addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: G2 (4732 hex) Set GTIN w/P5 addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: G5 (4735 hex[...]

  • Page 88

    Data Editing 4-12 PowerScan ® 7000 Linear Imager Label ID — continued ST AR T OPTION BARCODE Set RSS Expanded Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: RX (5258 hex) Set Code 39 Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: * (2A hex) Set Phar macode 39 Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: A[...]

  • Page 89

    Label ID Product Reference Guide 4-13 Label ID — continued ST AR T OPTION BARCODE Set Codabar Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: % (25 hex) Set Code 93 Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: & (26 hex) Set MSI/Plessey Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: @ (40 hex) Set Std 2[...]

  • Page 90

    Data Editing 4-14 PowerScan ® 7000 Linear Imager Case Conversion This feature can convert scanned bar code data to either all low er case or all upper case characters. NO TE Case con version affects ONL Y scanned bar code data, and does not affect Label ID , Prefix, Suffix, or other appended data. ST AR T MODE BARCODE Disable Conv er t to Upper Ca[...]

  • Page 91

    Label ID Product Reference Guide 4-15 Character Conversion Character conversion is an eight by te configuration item. The eight bytes ar e 4 character pairs repr esented in hexadecimal ASCII values. The first character in the pair is the character that will be converted. The sec- ond character in the pair is the charac ter to convert to . If the ch[...]

  • Page 92

    Data Editing 4-16 PowerScan ® 7000 Linear Imager Character Conversion — continued ST AR T MODE BARCODE Character Conv ersion DEF A UL T SETTING FOR THIS FEA TURE: FFFFFFFFFFFFFFFF hex (no con version) END[...]

  • Page 93

    Product Reference Guide 5-1 Chapter 5 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology ar e included in this chapter . Factory Defaults — are indicated in bold text and ar e highlighted with yellow throughout this section. · UPC-A · Phar macode 39 · UPC-E · Code 128 · EAN-13 · Interleav[...]

  • Page 94

    Symbologies 5-2 PowerScan ® 7000 Linear Imager UPC-A The following options apply to the UPC-A symbology . Disable/Enable UPC-A When disabled, the scanner will not read UPC-A bar codes. Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data[...]

  • Page 95

    UPC-A Product Reference Guide 5-3 UPC-A — continued ST AR T ST A TE B ARCODE Disable UPC-A Enable UPC-A Don’t Send Check Digit Send Check Digit Don’t Expand to EAN-13 Expand to EAN-13[...]

  • Page 96

    Symbologies 5-4 PowerScan ® 7000 Linear Imager UPC-A — continued ST AR T ST A TE B ARCODE Disable Sys- tem Number T ransmission Enable System Number T rans- mission END[...]

  • Page 97

    UPC-A Product Reference Guide 5-5 UPC-A — continued UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC- A label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 98

    Symbologies 5-6 PowerScan ® 7000 Linear Imager UPC-A — continued In-store Minimum Reads This feature specifies the minimum number of consecutive times an in- store printed label must be decoded be for e it is accepted as good read. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 99

    UPC-A Product Reference Guide 5-7 UPC-A — continued ST AR T ST A TE B ARCODE This item is used to set the timer v alue when optional add-ons are enabled. The selectab le range is from 10 to 300 mSec in 10 mSec increments and is entered in he x (01-0x1E by 01). T o configure this f ea- ture, scan the “ST ART” bar code abo v e to place the unit[...]

  • Page 100

    Symbologies 5-8 PowerScan ® 7000 Linear Imager UPC-E The following options apply to the UPC-E symbology . Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit Transmission Enable this option to transmit the check digit along with UPC-E bar code data. System Number The System N umber (SN) which is usually a zer[...]

  • Page 101

    UPC-E Product Reference Guide 5-9 UPC-E — continued ST AR T ST A TE B ARCODE Disable UPC-E Enable UPC-E Don’t Send Check Digit Send Check Digit Exclude Sys- tem Number Include System Number[...]

  • Page 102

    Symbologies 5-10 PowerScan ® 7000 Linear Imager Don’t Expand UPC-E to UPC-A Expand UPC-E to UPC-A Don’t Expand UPC-E to EAN-13 Expand UPC-E to EAN-13 END UPC-E — continued ST AR T ST A TE B ARCODE[...]

  • Page 103

    UPC-E Product Reference Guide 5-11 UPC-E — continued Minimum Reads This feature specifies the minimum number of consecutive times a UPC- E label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 104

    Symbologies 5-12 PowerScan ® 7000 Linear Imager GTIN The following options apply to the GTIN label data format. Disable/Enable GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format. ST AR T ST A TE B ARCODE Disable GTIN Enable GTIN END[...]

  • Page 105

    EAN-13 Product Reference Guide 5-13 EAN-13 The following options apply to the EAN-13 symbology . Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit Transmission Enable this option to transmit the check digit along with EAN-13 bar code data. EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN[...]

  • Page 106

    Symbologies 5-14 PowerScan ® 7000 Linear Imager EAN-13 — continued ST AR T ST A TE B ARCODE Disable EAN-13 Enable EAN-13 Don’t Send Check Digit Send Check Digit Don’t T ransmit EAN-13 Flag 1 Char T ransmit EAN-13 Flag 1 Char[...]

  • Page 107

    EAN-13 Product Reference Guide 5-15 Disable ISBN Enable ISBN END EAN-13 — continued ST AR T ST A TE B ARCODE[...]

  • Page 108

    Symbologies 5-16 PowerScan ® 7000 Linear Imager EAN-13 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-13 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 109

    EAN-8 Product Reference Guide 5-17 EAN-8 The following options apply to the EAN-8 symbology . Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. Check Digit Transmission Enable this option to transmit th e check D igit along with EAN-8 bar code data. ST AR T ST A TE B ARCODE Disable EAN-8 Enable EAN-8 Don’t Send Check [...]

  • Page 110

    Symbologies 5-18 PowerScan ® 7000 Linear Imager EAN-8 — continued Expand EAN-8 to EAN-13 — Expands EAN-8 data to the EAN-13 data format. Selecting this featur e also changes the symbology ID to match those requir ed for EAN-13. ST AR T ST A TE B ARCODE Don’t Expand to EAN-13 Expand to EAN-13 END[...]

  • Page 111

    EAN-8 Product Reference Guide 5-19 EAN-8 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-8 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 112

    Symbologies 5-20 PowerScan ® 7000 Linear Imager Add-ons Add-ons (or supplemental characters ) ar e commonly added to the end of UPC/EAN bar codes. The scanner wi ll read the add-ons if they are enabled and in the field of view . Three add-on types are supported: 2- digit, 5-digit and Code 128 add-ons. S uppor ted options are: None — This option [...]

  • Page 113

    Add-ons Product Reference Guide 5-21 Add-ons — continued ST AR T ST A TE B ARCODE Disable Optional 2- Digit Add-ons Enable Optional 2-Digit Add-ons Disable Optional 5- Digit Add-ons Enable Optional 5-Digit Add-ons Disable Optional Code 128 Add-ons Enable Optional Code 128 Add-ons END[...]

  • Page 114

    Symbologies 5-22 PowerScan ® 7000 Linear Imager RSS-14 The following options apply to the RSS-14 symbology . Disable/Enable RSS-14 When this feature is disabled, the scanner will not r ead RSS-14 bar codes. UCC/EAN 128 Emulation When enabled, RSS-14 bar codes will be translated to the UCC/EAN 128 label data format.[...]

  • Page 115

    RSS-14 Product Reference Guide 5-23 RSS-14 — continued ST AR T ST A TE B ARCODE Disable RSS-14 Enable RSS-14 Disable UCC/EAN 128 Emulation Enable UCC/EAN 128 Emulation END[...]

  • Page 116

    Symbologies 5-24 PowerScan ® 7000 Linear Imager RSS-14 — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS-14 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 117

    RSS Expanded Product Reference Guide 5-25 RSS Expanded The following options apply to the RSS E x panded symbology . Disable/Enable RSS Expanded When this feature is disabled, the scanner will not r ead RSS Expanded bar codes. UCC/EAN 128 Emulation When enabled, RSS Expanded bar codes will be translated to the UCC/ EAN 128 label data format. ST AR [...]

  • Page 118

    Symbologies 5-26 PowerScan ® 7000 Linear Imager RSS Expanded — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will deco[...]

  • Page 119

    RSS Expanded Product Reference Guide 5-27 RSS Expanded — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 120

    Symbologies 5-28 PowerScan ® 7000 Linear Imager RSS Expanded — continued RSS Expanded Length 1, Length 2 Pro- gramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. Scan th[...]

  • Page 121

    RSS Expanded Product Reference Guide 5-29 RSS Expanded — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS Expanded label must be decoded befor e it is accepted as good read. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 122

    Symbologies 5-30 PowerScan ® 7000 Linear Imager Code 39 The following options apply to the Code 39 symbology . Disable/Enable Code 39 When this feature is disabled, the scanner will not r ead Code 39 bar codes. Check Character Calculation When enabled, the scanner will ca lculate the check character of the labels. T urn this option on only wh en a[...]

  • Page 123

    Code 39 Product Reference Guide 5-31 Code 39 — continued ST AR T ST A TE B ARCODE Disable Code 39 Enable Code 39 Disable Check Char Calculation Enable Check Char Calculation Disable Check Char T ransmission Enable Check Char T ransmission ³0 0 8 A 0 1 [...]

  • Page 124

    Symbologies 5-32 PowerScan ® 7000 Linear Imager Code 39 — continued ST AR T ST A TE B ARCODE Don’t T ransmit Start/Stop Characters T ransmit Star t/Stop Characters Disable Code 39 Full ASCII Enable Code 39 Full ASCII END[...]

  • Page 125

    Code 39 Product Reference Guide 5-33 Code 39 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if [...]

  • Page 126

    Symbologies 5-34 PowerScan ® 7000 Linear Imager Code 39 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 127

    Code 39 Product Reference Guide 5-35 Code 39 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. Scan the END bar code. NO TE For Code 39 bar codes, a[...]

  • Page 128

    Symbologies 5-36 PowerScan ® 7000 Linear Imager Code 39 — continued Quiet Zones This feature enables/disables the r equirement that quiet zones must be present for Code 39 bar codes. ST AR T ST A TE B ARCODE Don’t require Quiet Zones Require Quiet Zones END[...]

  • Page 129

    Code 39 Product Reference Guide 5-37 Code 39 — continued Code 39 Stitching Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar code are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar code proofing requir ements [...]

  • Page 130

    Symbologies 5-38 PowerScan ® 7000 Linear Imager Code 39 — continued Minimum Reads This feature specifies the minimum number of consecutive times an Code 39 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 131

    Pharmacode 39 Product Reference Guide 5-39 Pharmacode 39 The following options apply to the P harmacode 39 symbology . Disable/Enable Pharmacode 39 When this feature is disabled, the scanner will not r ead Pharmacode 39 bar codes. ST AR T ST A TE B ARCODE Disable Pharmacode 39 Enable Phar macode 39 END[...]

  • Page 132

    Symbologies 5-40 PowerScan ® 7000 Linear Imager Pharmacode 39 — continued Start/Stop Characters Enables or disables transmission of Pharmacode 39 start/stop characters. Check Character Transmit Enable this option to transmit the check character with scanned bar code data. ST AR T ST A TE B ARCODE Don’t T rans- mit Start/Stop Characters T ransm[...]

  • Page 133

    Code 128 Product Reference Guide 5-41 Code 128 The following options apply to the Code 128 symbology . Disable/Enable Code 128 When this feature is disabled, the scanner will not r ead Code 128 bar codes. ST AR T ST A TE B ARCODE Disable Code 128 Enable Code 128[...]

  • Page 134

    Symbologies 5-42 PowerScan ® 7000 Linear Imager Code 128 — continued Transmit Function Characters Enables/disables transmission of Code128 function characters 1, 2, 3, and 4. F unction codes are transmitted as follows: • FNC1 = 80 hex • FNC2 = 81 hex • FNC3 = 82 hex • FNC4 = 83 hex ST AR T ST A TE B ARCODE Don’t T rans- mit Function Ch[...]

  • Page 135

    Code 128 Product Reference Guide 5-43 Code 128 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code i[...]

  • Page 136

    Symbologies 5-44 PowerScan ® 7000 Linear Imager Code 128 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 137

    Code 128 Product Reference Guide 5-45 Code 128 — continued Code 128 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. Scan the END bar code. NO TE[...]

  • Page 138

    Symbologies 5-46 PowerScan ® 7000 Linear Imager Code 128 — continued Code 128 Stitching Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar code are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decoded if all bar code proofing[...]

  • Page 139

    Code 128 Product Reference Guide 5-47 Code 128 — continued Minimum Reads This feature specifies the minimum number of consecutive times an Code 128 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 140

    Symbologies 5-48 PowerScan ® 7000 Linear Imager Interleaved 2 of 5 The following options apply to the I nte rleaved 2 of 5 (I 2 of 5) symbol- ogy . Disable/Enable Interleaved 2 of 5 When this feature is disabled, the scanner will not r e ad Interleav ed 2 of 5 bar codes. Check Digit Calculation When enabled, the scanner will calc ulate the check d[...]

  • Page 141

    Interleaved 2 of 5 Product Reference Guide 5-49 Interleaved 2 of 5 — continued ST AR T ST A TE B ARCODE Disable Interleaved 2 of 5 Enable Interleav ed 2 of 5 Disable Check Digit Calculation Enable Check Digit Calculation Disable Check Digit T ransmission Enable Check Digit T ransmission END[...]

  • Page 142

    Symbologies 5-50 PowerScan ® 7000 Linear Imager Interleaved 2 of 5 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner wil[...]

  • Page 143

    Interleaved 2 of 5 Product Reference Guide 5-51 Interleaved 2 of 5 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 144

    Symbologies 5-52 PowerScan ® 7000 Linear Imager Interleaved 2 of 5 — continued Interleaved 2 of 5 Length 1, Length 2 Pro- gramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation[...]

  • Page 145

    Interleaved 2 of 5 Product Reference Guide 5-53 Interleaved 2 of 5 Stitching Enables/disables stitching for I nterleaved 2 of 5 labels. When parts of an Interleav ed 2 of 5 bar code are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decoded if all bar code[...]

  • Page 146

    Symbologies 5-54 PowerScan ® 7000 Linear Imager Interleaved 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times an Interleav ed 2 of 5 label must be deco ded before it is accepted as good rea d. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 147

    Codabar Product Reference Guide 5-55 Codabar The following options apply to the Codabar symbology . Disable/Enable Codabar When this feature is disabled, the scanner will not r ead Codabar bar codes. Check Character Verification When enabled, the scanner will verify the check character of the labels. Check Character Transmit Enable this option to t[...]

  • Page 148

    Symbologies 5-56 PowerScan ® 7000 Linear Imager Codabar — continued ST AR T ST A TE B ARCODE Disable Codabar Enable Codabar Disable Check Char V erification Enable Check Char V er ification Disable Check Char T ransmission Enable Check Char T ransmission END[...]

  • Page 149

    Codabar Product Reference Guide 5-57 Codabar — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if [...]

  • Page 150

    Symbologies 5-58 PowerScan ® 7000 Linear Imager Codabar — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 151

    Codabar Product Reference Guide 5-59 Codabar — continued Codabar Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. Scan the END bar code. NO TE Fo[...]

  • Page 152

    Symbologies 5-60 PowerScan ® 7000 Linear Imager Codabar — continued Quiet Zones This feature enable/disables the r equirement that quiet z ones must be present for Codabar bar codes. ST AR T ST A TE B ARCODE Don’t require Quiet Zones Require Quiet Zones END[...]

  • Page 153

    Codabar Product Reference Guide 5-61 Codabar — continued Start/Stop Character Type Codabar has four pairs of S tar t/S top patterns. Select one pair to match your application. Start/Stop Character Transmission The transmission of start and end characters of Codabar is selected below . Start/Stop Character Match This feature enables/disables the r[...]

  • Page 154

    Symbologies 5-62 PowerScan ® 7000 Linear Imager Codabar — continued ST AR T ST A TE B ARCODE Star t/Stop T ype: ABCD/ TN*E Star t/Stop T ype: ABCD/ ABCD Star t/Stop T ype: abcd/tn*e Start/Stop T ype: abcd/ abcd Disable Star t/Stop Char T ransmission Enable Start/Stop Char T ransmission[...]

  • Page 155

    Codabar Product Reference Guide 5-63 Codabar — continued ST AR T ST A TE B ARCODE Disable Start/Stop Char Match Enable Star t/Stop Char Match END[...]

  • Page 156

    Symbologies 5-64 PowerScan ® 7000 Linear Imager Codabar — continued Codabar Stitching Enables/disables stitching for Codabar labels. When parts of a Codabar label are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decoded if all bar code proofing requir[...]

  • Page 157

    Codabar — continued Product Reference Guide 5-65 Codabar — continued Minimum Reads This feature specifies the minimum number of consecutive times an Codabar label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 158

    Symbologies 5-66 PowerScan ® 7000 Linear Imager Code 93 The following options apply to the Code 93 symbology . Disable/Enable Code 93 When this feature is disabled, the scanner will not r ead Code 93 bar codes. ST AR T ST A TE B ARCODE Disable Code 93 Enable Code 93 END[...]

  • Page 159

    Code 93 Product Reference Guide 5-67 Code 93 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar code if [...]

  • Page 160

    Symbologies 5-68 PowerScan ® 7000 Linear Imager Code 93 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 161

    Code 93 Product Reference Guide 5-69 Code 93 — continued Code 93 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. Scan the END bar code. NO TE Fo[...]

  • Page 162

    Symbologies 5-70 PowerScan ® 7000 Linear Imager Code 93 — continued Code 93 Stitching Enables/disables stitching for Code 93 bar codes. When parts of a Code 93 label are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decoded if all bar code proofing req[...]

  • Page 163

    Code 93 Product Reference Guide 5-71 Code 93 — continued Minimum Reads This feature specifies the minimum number of consecutive times an Code 93 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 164

    Symbologies 5-72 PowerScan ® 7000 Linear Imager MSI/Plessey The following options apply to the MSI/P lessey symbology . Disable/Enable MSI/Plessey When this feature is disabled, the scanner will not r ead MSI/Plessey bar codes. Check Digit Verification This feature specifies whether one or two check digits ar e to be calcu- lated and verified. Che[...]

  • Page 165

    MSI/Plessey Product Reference Guide 5-73 MSI/Plessey — continued ST AR T ST A TE B ARCODE Disable MSI/Plessey Enable MSI/Plessey Disable Check Digit V erification Enable Check Digit V er ification 1-Digit Check Digit V erification 2-Digit Check Digit V er ification[...]

  • Page 166

    Symbologies 5-74 PowerScan ® 7000 Linear Imager Disable Check Digit T ransmission Enable Check Digit T ransmission END MSI/Plessey — continued ST AR T ST A TE B ARCODE[...]

  • Page 167

    MSI/Plessey Product Reference Guide 5-75 MSI/Plessey — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a bar [...]

  • Page 168

    Symbologies 5-76 PowerScan ® 7000 Linear Imager MSI/Plessey — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 169

    MSI/Plessey Product Reference Guide 5-77 MSI/Plessey — continued MSI/Plessey Length 1, Length 2 Program- ming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. Scan the END bar cod[...]

  • Page 170

    Symbologies 5-78 PowerScan ® 7000 Linear Imager MSI/Plessey — continued MSI/Plessey Stitching Enables/disables stitching for MSI/Plessey bar codes. When parts of an MSI/Plessey label are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar[...]

  • Page 171

    MSI/Plessey Product Reference Guide 5-79 MSI/Plessey — continued Minimum Reads This feature specifies the minimum number of consecutive times an MSI/Plessey label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 172

    Symbologies 5-80 PowerScan ® 7000 Linear Imager Standard 2 of 5 The following options apply to the S tandard 2 of 5 symbology . Disable/Enable Standard 2 of 5 When this feature is disabled, the sc anner will not r ead S tandard 2 of 5 bar codes. Check Digit Verification When enabled, the scanner will veri fy the check digit of the labels. Check Di[...]

  • Page 173

    Standard 2 of 5 Product Reference Guide 5-81 Standard 2 of 5 — continued ST AR T ST A TE B ARCODE Disable Std 2 of 5 Enable Std 2 of 5 Disable Check Digit V erification Enable Check Digit V er ification Disable Check Digit T ransmission Enable Check Digit T ransmission END[...]

  • Page 174

    Symbologies 5-82 PowerScan ® 7000 Linear Imager Standard 2 of 5 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will d[...]

  • Page 175

    Standard 2 of 5 Product Reference Guide 5-83 Standard 2 of 5 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 176

    Symbologies 5-84 PowerScan ® 7000 Linear Imager Standard 2 of 5 — continued Standard 2 of 5 Length 1, Length 2 Pro- gramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. 4. S[...]

  • Page 177

    Standard 2 of 5 Product Reference Guide 5-85 Standard 2 of 5 — continued Standard 2 of 5 Stitching Enables/disables stitching for S tandard 2 of 5 bar codes. When parts of a S tandard 2 of 5 label are pr esented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be decode[...]

  • Page 178

    Symbologies 5-86 PowerScan ® 7000 Linear Imager Standard 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times a S tan- dard 2 of 5 label must be decoded befor e it is accepted as good read. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 179

    PDF 417 Product Reference Guide 5-87 PDF 417 The following options apply to the PDF 417 symbology . Disable/Enable PDF 417 When this feature is disabled, the scanner will not r ead PDF 417 bar codes. ST AR T ST A TE B ARCODE Disable PDF417 Enable PDF 417 END[...]

  • Page 180

    Symbologies 5-88 PowerScan ® 7000 Linear Imager PDF 417 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding — When variable length decoding is enabled, the scanner will decode a [...]

  • Page 181

    PDF 417 Product Reference Guide 5-89 PDF 417 — continued ST AR T MODE BARCODE Va r i a b l e Length Decoding Fix ed Length Decoding END[...]

  • Page 182

    Symbologies 5-90 PowerScan ® 7000 Linear Imager PDF 417 — continued PDF 417 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the two digits rep- resenting the length in decimal notation. Scan the END bar code.[...]

  • Page 183

    PDF 417 Product Reference Guide 5-91 PDF 417 — continued Minimum Reads This feature specifies the minimum number of consecutive times a PDF 417 label must be decoded before it is accepted as good r ead. ST AR T READS BARCODE Minimum = 1 Read Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads END[...]

  • Page 184

    Symbologies 5-92 PowerScan ® 7000 Linear Imager NOTES[...]

  • Page 185

    Product Reference Guide A-1 Appendix A Product Specifications Optical and Read Performance Parameters P arameter S pecification Scanning Width 2” wide at 1” from scanner 6” wide at 7” from scanner Minimum Resolution 4mil minimum element size (at some distance, no implied DOF) Depth of Field (75% read rate; 90% PCS; Code 39 with 2.5:1 W/N ra[...]

  • Page 186

    A-2 PowerScan ® 7000 Linear Imager Physical Properties Electrical Parameters P arameter S pecification Dimensions (T ypical): Height 7.5”/190 mm Length 4.5”/115 mm Width 3.0”/75 mm W eight 10 ounces/284 g (without cab le) V oltage Requirements +4 to 14 VDC +/- 5% P arameter Specification Input V oltage +4 to 14 VDC Input P ower Maximum Opera[...]

  • Page 187

    Environmental Parameters Product Reference Guide A-3 Environmental Parameters Other Parameters P arameter S pecification Mechanical Shock 50 drops from 6.5 f eet (2 meters) to concrete -22 ° F to 122 ° F (-30 ° C to +50 ° C) Contaminants Spray/rain Dust/par ticulate Scanners: Spra y/rain — IEC 529-IPX5D W Dust/par ticulate — IEC 529-IP6XD W[...]

  • Page 188

    A-4 PowerScan ® 7000 Linear Imager NOTES[...]

  • Page 189

    Product Reference Guide B-1 Appendix B Cable Pinouts Standard Cable Pinouts (Primary Interface Cables) RS-232 IBM Port 5B/9B/17 1 2C T S 3 4R T S 5 RXD 6T X D 7 8V C C I N 9G N D 10 Cable Select 1 2 3 4D A T A - 5 6D A T A + 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10 Position RJ (Scanner End)[...]

  • Page 190

    Cable Pinouts B-2 PowerScan ® 7000 Linear Imager IBM USB USB & USB Keyboard Wand Emulation 1 2 3 4D - 5 6D + 7 8V I N 9G N D 10 1 2 3 4D - 5 6D + 7 8 VBUS_VIN 9G N D 10 1 2 3 W AND~ 4 5 6 7 8 VCC_IN 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10 Position RJ (Scanner End) Pin 1 10 Position RJ (Scanner End)[...]

  • Page 191

    Standard Cable Pinouts (Primary Interface Cables) Product Reference Guide B-3 Keyboard Wedge 1 2 KB_D A T A 3 A T_CLK 4 KB_CLK 5 6 A T_DA T A 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End)[...]

  • Page 192

    Cable Pinouts B-4 PowerScan ® 7000 Linear Imager NOTES[...]

  • Page 193

    Product Reference Guide C-1 Appendix C Alpha-Numeric Pad A B C D E F[...]

  • Page 194

    C-2 PowerScan ® 7000 Linear Imager Alpha-Numeric Pad 1 2 3 0 9 8 7 6 5 4[...]

  • Page 195

    Product Reference Guide D-1 Appendix D Default Settings Defaults by Symbology The following is a partial list of ke y settings for each symbology type. Code T ype Read Enable Checksum V erification Enable Checksum T ransmission Enable Label ID UPC-A ✓✓ ✓ A UPC-E ✓✓ ✓ E EAN-13 ✓✓ ✓ F EAN-8 ✓✓ ✓ FF RSS-14 R4 RSS Expanded RX Co[...]

  • Page 196

    D-2 PowerScan ® 7000 Linear Imager Interface Default Exceptions The factory default settings indicated in the programming sections (by bold text and yellow highlighting) reflect factory configuration for the RS-232 standard interface. The follo w ing tables list default exceptions by interface for the remaining available interfaces. IBM Interfaces[...]

  • Page 197

    Interface Default Exceptions Product Reference Guide D-3 RS-232 Wincor/Nixdorf P arameter Default Setting Interf ace T ype RS-232-WN Number of Host T ransmit Buffers One Buffer RS-232 P ar ity Odd RS-232 Hardware Control CTS Flow Control UCC/EAN-128 Label ID ‘P’ Code 93 Label ID ‘L ’ Code 128 Label ID ‘K’ Codabar Label ID ‘N’ EAN-8 [...]

  • Page 198

    D-4 PowerScan ® 7000 Linear Imager Keyboards Keyboard interfaces include USB Keyboard and Keyboar d W edge A-Y. P arameter Default Setting K eyboard W edge Interface T ype USB K eyboard Label ID T ransmission Disable[...]

  • Page 199

    Product Reference Guide E-1 Appendix E Keyboard Function Key Mappings Keyboard Model Cross Reference Ta b l e E - 2 summarizes the keyboard models, their defined protocol, scancode set, and some unique features. The r emaining tables in this chapter pro vide the function key maps associated with each of the scan- code sets.[...]

  • Page 200

    E-2 PowerScan ® 7000 Linear Imager Table E-1. Keyboard Model Cross Reference Model T ype I/F ID T rans- mission Protocol Scancode Set Func. Key Map Support Use Country Mode PC/XT F oreign AL T Mode W edge A PC/XT Scan Set 1 No No AT ; PS/2 25-286; PS/2 30-286; PS/2 50, 50Z; PS/2 60,70,80,90,95 F oreign AL T Mode W edge B A T/PS2 Scan Set 2 No No P[...]

  • Page 201

    Keyboard Model Cross Reference Product Reference Guide E-3 Table E-2. Scanset 1 Function Key Map ASCII (hex) ASCII code Ke y Scancode 00 NUL AL T right Make E0h 38h 01 SOH AL T right Break E0h B8h 02 STX AL T left Make 38h 03 ETX AL T left Break B8h 04 EO T CTRL left Make 1Dh 05 ENQ CTRL left Break 9Dh 06 A CK CTRL right Make E0h 1Dh 07 BEL CTRL ri[...]

  • Page 202

    E-4 PowerScan ® 7000 Linear Imager Table E-3. Scanset 2 Function Key Map ASCII (hex) ASCII code K ey Scancode 00 NUL AL T right Make E0h 11h 01 SOH AL T right Break E0h F0h 11h 02 STX AL T left Make 11h 03 ETX AL T left Break F0h 11h 04 EO T CTRL left Make 14h 05 ENQ CTRL left Break F0h 14h 06 A CK CTRL right Make E0h 14h 07 BEL CTRL right Break E[...]

  • Page 203

    Keyboard Model Cross Reference Product Reference Guide E-5 Table E-4 . Scanset 3, 102-Key Function Key Map ASCII (hex) ASCII code Ke y Scancode 00 NUL AL T r ight Make 39h 01 SOH AL T right Break F0h 39h 02 STX AL T left Make 19h 03 ETX AL T left Break F0h 19h 04 EO T CTRL left Make 11h 05 ENQ CTRL left Break F0h 11h 06 A CK CTRL r ight Mak e 58h 0[...]

  • Page 204

    E-6 PowerScan ® 7000 Linear Imager Table E-5. Scanset 3 122-Key Function Key Map ASCII (hex) ASCII code K ey Scancode 00 NUL AL T Right Make 39h 01 SOH AL T Right Break F0h 39h 02 STX AL T left Make 19h 03 ETX AL T left Break F0h 19h 04 EO T CTRL left (RESET) Mak e only 11h 05 ENQ CTRL left (RESET) Mak e/Break 11h F0h 11h 06 A CK ONLINE Enter Mak [...]

  • Page 205

    Keyboard Model Cross Reference Product Reference Guide E-7 Table E-6. Japanese DOS Function Key Map ASCII value ASCII code Ke y Scancode 00h NUL AL T r ight Make 31h 01h SOH AL T right Break B1h 02h STX AL T left Make 31h 03h ETX AL T left Break B1h 04h EOT CTRL left Make 41h 05h ENQ CTRL left Break C1h 06h ACK CTRL right Make 41h 07h BEL CTRL r ig[...]

  • Page 206

    E-8 PowerScan ® 7000 Linear Imager Table E-7. NEC 9801-Key Function Key Map ASCII value ASCII code Ke y Scancode 00h NUL unused n/a 01h SOH CR 1Ch 02h STX CAPS LOCK ON (make) 71h 03h ETX CAPS LOCK OFF (break) F1h 04h EO T CTRL left Mak e 74h 05h ENQ CTRL left Break F4h 06h A CK CTRL-C 60h 07h BEL n/a n/a 08h BS BS 0Eh 09h HT T AB r ight 0Fh 0Ah LF[...]

  • Page 207

    Product Reference Guide F-1 Appendix F Host Commands Accepting RS-232 Commands The scanner responds to the follo wing RS-232 commands: If one of the abo ve commands is received, the scanner will perform the steps indicated for the command. Host commands for other interfaces is also available. Contact T ech Su pport for more details. COMMAND ASCII H[...]

  • Page 208

    F-2 PowerScan ® 7000 Linear Imager NOTES[...]

  • Page 209

    Product Reference Guide G-1 Appendix G Sample Symbols 0 123456 7890 1234567890 Code 128 9 780330 290951 BC321 123456-9$ 123456 UPC-A Code 128 Code 39 Code 93 Interleav ed 2 of 5 EAN-13 Code 2 of 5 A13579B Codabar[...]

  • Page 210

    G-2 PowerScan ® 7000 Linear Imager Sample Symbols (01)00123456789012 Car Registration PDF417 RSS-14 0100123456789050 RSS Expanded[...]

  • Page 211

    ASCII Char t ASCII Char . He x No. ASCII Char . He x No. ASCII Char . He x No. ASCII Char . He x No . NUL SOH STX ETX EO T ENQ AC K BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F SP ! “ # $ % & ’ ( ) * + , [...]

  • Page 212

    Asia P acific PSC Hong K ong Hong K ong T e lephone: [852]-2-584-6210 F ax: [852]-2-521-0291 Au s t r a l i a PSC Asia P ac ific Pty Ltd. Nor th Ryde, A ustralia T e lephone: [61] 0 (2) 9878 8999 F ax: [61] 0 (2) 9878 8688 France PSC S .A.R.L. LES ULIS Cede x, F rance T e lephone: [33].01.64.86.71.00 F ax: [33].01.64 46.72.44 Germany PSC GmbH Dar m[...]