Runco CX-OPAL55 manual

CX-42HD CX-OPAL42 CX-47HD CX-OPAL47 CX-55HD CX-OPAL55 CX-65HD 1080p High-Definition LCD Flat Panel Displays with I NSTALLATION /O PERATION M ANUAL[...]

[...]

Crystal Seri es LCD Installation/Operati on Manual iii PRE L IMINAR Y RuncoCare™ Standard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This RuncoCare St andard Limite d Warranty is pro vided free of ch[...]

iv Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.co m or via phone at (toll fr ee) 800-23RUNCO (80 0-237-8626). If the c[...]

Crystal Series LCD Installation/Operation Manual v PRE L IMINAR Y j Failure to follow mainten ance procedu res as outline d in the pro duct’s user g uide where a schedule is spec ified for regular cleaning of th e product k Opening the pro duct and/or tampering with inte rnal circui try l Products lost, stolen or discarded m Any damage or di ssat[...]

vi C rystal Series LC D Inst allation/Operation Manual PRE L IMINAR Y RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LI MITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. 1. RUNC O SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF T[...]

Crystal Series LCD Installation/Operation Manual vii PRE L IMINAR Y Thank you for your purchas e of this quality Run co product! For best perfor mance, please read this ma nual carefully a s it is you r guide throug h the men us and oper ation. 1. Read these instruction s. 2. Keep these instructions . 3. Heed all warnings. 4. Follow all instruction[...]

viii Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, LLC Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declare s that the p roducts Model Number s: CX-42HD, CX-OPAL42, CX-47HD, CX-OPAL 47, CX-5 5HD, CX-OPAL55 and CX-65HD conform with th e provisio[...]

Crystal Series LCD Installation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This equip[...]

x Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Crystal Series LCD Installation/Operation Manual xi 1 Table of Contents PRE L IMINAR Y RuncoCare™ Standa rd Two Year Limited Warran ty ........ ................... ................. ....... iii Important Safety Ins tructions ...... ................. ................ ................ ................ ................ vii Compliance Information ...[...]

Table of Contents xii C rystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 4. Operation .......... ................ ................ ................ ................ ................ ............. .......... 27 Turning on t he Power ... ................. ................ ................ ................ ................ .............[...]

Crystal Series LCD Installation/Operation Manual xiii 1 List of Figures PRE L IMINAR Y 2-1. Crystal Series LCD Controls an d Indicators ...... ................ ................ ................ ............ 5 2-2. Model CX-4 2HD and CX-OPAL 42 Inputs and Outputs .................. ................ ............... 8 2-3. Model CX-4 7HD and CX-OPAL 4[...]

List of Figures xiv Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Crystal Series LCD Installation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and ope rate the Runc o Crystal Series Models CX-42HD, CX-OPAL 42, CX-47HD, CX-OPAL47, CX- 55HD, CX-OPAL55 and CX-65H D Flat-Panel LCDs. Throughout th is manual, the Run co CX-42HD, CX-O PAL42, CX-47HD, CX[...]

Introduc tion 2 Cry stal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Graphic Convention s: These symb ols appear in num erous places throughout th e manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic inform[...]

Introd uction Crystal Series LCD Installation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Runco presents the Crystal Series CX-4 2HD, CX-OPAL42, CX-47HD , CX-OPAL47, CX-55HD, CX-O PAL55 and CX-65HD Flat-Panel LCDs, p erfect for tho se who demand our award- winning flat-pa nel performance along with advanced LC D technol[...]

Introduc tion 4 Cry stal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Parts List Your Crystal Serie s LCD is shipped wi th the following ite ms. If any items ar e missing or damaged, pl ease contact your Runco de aler or Runco Customer Serv ice at (800) 23-RUNCO. • Crystal Series L CD Panel with T able Stand: Model CX-42HD (part nu mb[...]

Crystal Series LCD Installation/Operation Manual 5 PRE L IMINAR Y 2.1 Crystal Series LCD at a Glance Controls and Indicators Figure 2-1 sho ws the locations o f the Crystal Ser ies LCD controls and indicators. Figure 2-1. Crystal Series LCD Controls an d Indicators 2. Controls and Functions SOURCE RGB PC Audio In Speaker Out HDMI 4 HDMI 3 HDMI 2 HD[...]

Controls and Functions 6 Cry stal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Figure 2-1. Crys tal Series LCD Controls and In dicators (co ntinued) 1. HANDLES Always use the handles when car rying the display . DO NOT touch or hold the screen face . 2. MAIN POWER SWITCH Connects or disc onnects the d isplay panel f rom the AC po wer so[...]

Controls and Functi ons Crystal Series LCD Installation/Operation Manual 7 PRE L IMINAR Y 5. ST A TUS LED Lights orange to indicate t hat the Crystal Se ries LCD is in sta ndby mode; O ff during normal oper ation or if t he main powe r switch is set to off. 6. KEYP AD You can use th e keypad inste ad of the remo te control unit t o operate the o n-[...]

Controls and Functions 8 Cry stal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Crystal Series LCD Inputs and Outputs Figure 2-2, Fig u re 2-3, Figure 2-4 a n d Figure 2-5 show the lo cations of the Crystal Seri es LCD inputs and o utputs. Figure 2-2. Model CX-42HD an d CX-OPAL42 Inputs and Outputs ➤   [...]

Controls and Functi ons Crystal Series LCD Installation/Operation Manual 9 PRE L IMINAR Y Figure 2-3. Model CX-47HD and CX-OPAL47 Inputs and Out puts           ?[...]

Controls and Functions 10 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Figure 2-4. Model CX-55HD an d CX-OPAL55 Inputs and Outputs  ! !  ! !  %![...]

Controls and Functi ons Crystal Series LCD Installation/Operation Manual 11 PRE L IMINAR Y Figure 2-5. Model CX-65HD Inputs and Output s  ! !  ! !  %! ?[...]

Controls and Functions 12 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 1. AC Power Input (100 to 240 V AC) Connect the Crystal Ser ies LCD to power here. 2. RS-232 CONTR OL POR T A female, 9-pin D-su b connector for interfacing w ith a PC or ho me theater automation/control system. 3. VIDEO 1/SCART Sync Input (Composite Video + [...]

Controls and Functi ons Crystal Series LCD Installation/Operation Manual 13 PRE L IMINAR Y 2.2 Crystal Series LCD Remote Control Figure 2-6 sho ws the Crystal Ser ies LCD remote control, and the paragrap hs that follo w describe its functionality. Figure 2-6 . Crystal Se ries LCD Re mote Con trol RGB 16:9 4:3 LETTER V WIDE TIMER OFF VOL- VOL+ ENTER[...]

Controls and Functions 14 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 1. ON Use this butt on to turn the Crystal Ser ies LCD on. 2. RGB HD Press this button to swit ch to the RGB HD input. 3. ST ANDBY Use this butt on to put th e Crystal Series LC D into standby mo de. 4. Source Sele ction Buttons HDMI 1 / HDMI 2 / HDMI 3 / HDM[...]

Controls and Functi ons Crystal Series LCD Installation/Operation Manual 15 PRE L IMINAR Y 10. EXIT Press this button to hide the OSD co ntrols. MENU Press this button t o access the o n-screen display (OSD) controls, o r to exit th e current menu and return to the previous one. INFO Press this button t o view input sig nal information (source and [...]

Controls and Functions 16 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Crystal Series LCD Installation/Operation Manual 17 PRE L IMINAR Y 3.1 Remote Control Battery Installation To install batteries in the remote co ntrol: 1. Slide the bat tery cover in the direction of the arro w and remo ve it. 2. Insert the incl uded batteries. Ensure that t he polarities c orrectly m atch the and markings inside the battery com pa[...]

Installation 18 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Cryst al Series L CD installa tion process. Th e sections following this one provide detailed instructions. Installation must be performe d by a qualified, tr ained custom video installation specialist. Table 3-1.[...]

Installation Crystal Series LCD Installation/Operation Manual 19 PRE L IMINAR Y 3.3 Installation Considerations Proper instal lation of your C rystal Series LC D will ensure the highest possib le picture quality. Whether you are installing the Crystal Series LCD temporarily or pe rmanently, you should take the following into ac count to ensure that[...]

Installation 20 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Connecting the Crystal Series LCD to Source Components Connect your video sources to the Crystal Ser ies LCD as shown and descri bed in the sections th at follow. HDMI Connections: Th e Crystal Series LCD has four H DMI inputs for c onnecting a BD/HD-DVD/DVD playe r, D[...]

Installation Crystal Series LCD Installation/Operation Manual 21 PRE L IMINAR Y RGB Connections: The Crystal Se ries LCD has an RGB input and a stereo audio inpu t for connect ing a persona l computer; see Figure 3-2 . Figure 3-2. Analog RGB Connec tions 1. Refer to Supported Timings on pag e 67 for a list of compute r signals compatible with the C[...]

Installation 22 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Componen t Video Conn ections: If you h ave a DVD player, DTV decoder with a component (YPbPr ) output or ot her componen t video sou rce, connect it to the COMPONENT 1 or COMPONENT 2 input as sh own in Figure 3-3 . Figure 3-3. Component Video Connecti ons Composite/S-[...]

Installation Crystal Series LCD Installation/Operation Manual 23 PRE L IMINAR Y SCART Video Connec tions: Connect t he green, b lue and red ou tputs from your SCART source to th e Component 1 input on the Cr ystal Series LCD. Co nnect the sync o utput from your SCART so urce to the Video 1 input on th e Crystal Series LC D. See Figure 3-5 . Figure [...]

Installation 24 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Connecting to a Dolby Digital Amplifier If your home th eater has a Dolby Digital amplifier or receiver, conne ct the SPDIF d igital audio output fr om the Crystal Series LC D to the digital au dio input of the am plifier/receiver as shown in Figure 3-7 . Figure 3-7. D[...]

Installation Crystal Series LCD Installation/Operation Manual 25 PRE L IMINAR Y Connecting an External IR Receiver If infrared si gnals from the remote contro l cannot reach the display due to excessive distance or obstru ctions such as walls or cabin et doors, you can connect an ext ernal IR repeater system to the IR INPUT on the Crystal Series LC[...]

Installation 26 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Crystal Series LCD Installation/Operation Manual 27 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your sour ce components. 2. Plug the female end of the supplied power cord into the AC receptacle on t h e side of the Crystal Series LC D (AC 100V ~ 240 V). See Figure 2-2 (CX-42HD/CX- OPAL42), Figure 2-3 (CX-47HD/CX-OPAL47), Figure 2- 4 (CX-55HD[...]

Operation 28 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 4.3 Setting the PC Display Properties To maximize imag e quality when using the Crystal Series LCD with a pe rsonal compute r, you may need t o adjust the display propert ies of your PC video card. To do this: 1. Choose Settings from the Windows St art menu and click on ?[...]

Operation Crystal Series LCD Installation/Operation Manual 29 PRE L IMINAR Y 4.4 Using the On-Screen Menus To use the o n-screen menu s: 1. Press MENU to display the Main Menu. 2. To select a m enu item, use the up- or down -arrow butto ns ( , ) on the remo te control to highlig ht it. 3. Press ENTER or the ri ght-arrow button ( ) to access t hat m[...]

Operation 30 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Figure 4-1. Crystal Series LCD OSD Menu Structure Setup OSD Language English, Français, Español, Portugu ês or Deutsch OSD Timer 0, 10, 20 ... 60 sec . PC Mode Adjust Auto Adjust Clock Phase H. Position V. Position Factory Re set Overscan (not available with PC signals[...]

Operation Crystal Series LCD Installation/Operation Manual 31 PRE L IMINAR Y Main Menu The Main Menu is the starti ng point for acce ssing all Crystal Series LCD fu nctions. (The ISF Calibrat ion menu is not a ccessible until you enter a passco de.) Source From the Main Menu, select So urce to choo se a video signa l source. The active sou rce is i[...]

Operation 32 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description 16:9 16:9 Select 16:9 to vi ew 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 display. 4:3 4:3 4:3 scales the input signal to fit in[...]

Operation Crystal Series LCD Installation/Operation Manual 33 PRE L IMINAR Y Picture Adjust Use the controls in the Picture Adju st menu to calibr ate your Crystal Se ries LCD for optimum picture qu ality. The Crystal Series LCD ha s been designed to incorpo rate setup and calib ration standards establishe d by the Imaging Science Foundation (ISF )[...]

Operation 34 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Figure 4-2. Typical PLUG E Pattern fo r Adjusting Br ightness PLUGE patterns v ary but gene rally consist of some combin ation of black , white and gr ay areas against a bla ck background . The example ab ove includes two vertical bars and fo ur shaded boxes. Select Brigh[...]

Operation Crystal Series LCD Installation/Operation Manual 35 PRE L IMINAR Y Color Saturation: On your exter nal test patter n source, sele ct a color bar p attern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint Select Color fro m the Picture Adju st menu. While loo king at the c olor[...]

Operation 36 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Sharpness: “Sh arpness” is the amou nt of high-fre quency deta il in the image. To adjust sharpness, select Shar pness from the Picture Adjust menu and press ENT ER . O n your external test p attern source, select a patte rn like the one shown in Figure 4-5 . Adjust a[...]

Operation Crystal Series LCD Installation/Operation Manual 37 PRE L IMINAR Y Color Temperature: To choose a color t emperature se tting, select Colo r Temp. from t he Picture Adjust menu and pr ess ENTER . (Color te mperature defines the “color of gra y.”) The choices are 5400 K, 6500K, 8500K and Custom. The default setting, 6500 K, is appropri[...]

Operation 38 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Audio To a djust the Cr ystal Series LCD audio settings, sele ct Audio from the Main M enu and press ENTER . Balance: To adjust the left/right spe aker balanc e, select Balanc e from the Audio Menu and press ENTER . Use th e left- and/or righ t-arrow butto ns to make one [...]

Operation Crystal Series LCD Installation/Operation Manual 39 PRE L IMINAR Y Sleep Timer: Use the Sleep Ti mer to turn off the Crystal Series LCD after a specified interval. To set the Sleep Timer: • Select Sleep Tim er from the Timer menu and press ENTER . – OR – • Press the TIMER OFF butto n on the re mote cont rol. Use the right- o r lef[...]

Operation 40 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Overscan (not available with PC signals): Overscan pushes the ou tside edge o f the active picture area of the v ideo signal out beyond the edge of the display a rea. Some television progr ams are produced ba sed on the assumption that older television sets may not displa[...]

Operation Crystal Series LCD Installation/Operation Manual 41 PRE L IMINAR Y HDMI CSC (Color Space Control): If the color space of the incomin g signal on an HDMI input is known, select HDMI CSC from the Setup menu an d set it to RGB or Component for that input. In most situations, the Auto setting works well. Baud Rate: Select Baud Rate fro m the [...]

Operation 42 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y ISF Calibration Use the ISF Calib ration menu to perform advanc ed picture quality adjustments. This menu should be used by ISF -certified technician s only . Picture Adjust: The controls in this menu are identica l to those in the ma in Picture Ad just menu, but are ac c[...]

Operation Crystal Series LCD Installation/Operation Manual 43 PRE L IMINAR Y •T i n t • Sharpness •G a m m a • Color temperature selection (5400, 650 0, 8500 or Custom) To save image se ttings to a prese t, select Save Set tings from the Pict ure Adjust menu and select “Custom,“ “ISF Day” or “ISF Night.” Restore Settings: To re [...]

Operation 44 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Table 4-2 des cribes the effe cts of adjustin g the primary c olor hues. • CMS Saturation : This contr ol adjusts the c olor saturation le vel – the amou nt of that color in a video image. Lower settings produce less saturat ed colors; a settin g of “0” removes th[...]

Operation Crystal Series LCD Installation/Operation Manual 45 PRE L IMINAR Y Splash Duration: Use Splash Duration to control how long the Cr ystal Series LCD splash screen remai ns on-screen after power-up ; see Fi gure 4-6 . T o prevent th is screen from appearing, set the Splash Dur ation to 0. Figure 4-6. Crystal Se ries LCD Splash Screen You ca[...]

Operation 46 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 4.5 Using Picture-In-Picture (PIP) To use PIP, press the PIP button. The PIP window ap pears inside the main image window. Press PIP again to switch t o side-by-side PIP mode. Press PIP again to turn PIP off. 16:9 4:3 LETTER V WIDE PIP POSITION SIZE SWAP PIP SRC AUDIO 1 A[...]

Operation Crystal Series LCD Installation/Operation Manual 47 PRE L IMINAR Y Press the PIP SRC button to select a PIP signal source. Fo r each source, Table 4-3 shows which of the other so urces are avai lable as a PIP so urce. Changing the PIP Position To change the PIP wi ndow position, press the POSITION button on the remote control repea tedly [...]

Operation 48 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Changing the PIP Size To ch ange the PIP window size, pr ess the SIZE button on the remo te control repeatedly to achieve the d esired window size. Swappi ng the Mai n and PIP Images To swap the main and PIP ima ges, press the SWAP b utton on th e remote control. ➤ 16:9[...]

Crystal Series LCD Installation/Operation Manual 49 PRE L IMINAR Y 5.1 Cleaning Regular cleaning will extend t he life and p erformance of the Crystal Series LCD. Before cleaning, be su re to unplug the power cord from t he power ou tlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumstanc es use solvents s uch as ben z[...]

Maintenance and Troubleshooting 50 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Picture is oka y, but there is no sound. • Audio output is muted. • Volume setting is too low. • Source component is connected incorrectly or not at all. • Speakers are connected incorrect ly or not at all. • Audio setting s are incorrect .[...]

Crystal Series LCD Installation/Operation Manual 51 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the Crystal Series LCD with a home theater automation /control system or a PC running termin al emulation software (such as HyperTer minal, provided w ith Microsoft ® Windows™), connect it to your control system or PC as s[...]

Serial Communications 52 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y [ S4A 000# Main input selection 1 = Video 1 2 = Video 2 3 = Component 1/SCART 4 = Component 2 5 = HDMI 3 6 = RGB 7 = HDMI 4 8 = HDMI 1 9 = HDMI 2 Example: [S4A0006 selects RGB [ +4A Select “next” Main AV input [ S4E 000# Aspect ratio selection 0 = 4:3 1 = [...]

Serial Communications Crystal Series LCD Installation/Operation Manual 53 PRE L IMINAR Y [ SDE 000# Set PIP aspect ratio 0 = 4:3 1 = 16:9 Example: [SDE0001 selects 16:9 aspect ratio PIP window [ SDF 000# Set PIP window position 0 = Top/Left 1 = Top/Right 2 = Bottom/Left 3 = Bottom/Right Example: [SDF0001 positions PIP window in upper-right corner o[...]

Serial Communications 54 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y 0001 Component 2 0019 RGB 0105 Video 1 0027 Video 2 [ key 0003 CUSTOM 0062 ISF NIGHT 0031 ISF DAY [ key 0040 16:9 0043 4:3 0039 LETTERBOX 0126 VIRTUALWIDE [ key 0007 Right-Arrow key 0016 Down-Arrow key 0018 Up-Arrow key 0011 Left-Arrow key 0046 ENTER [ key 002[...]

Serial Communications Crystal Series LCD Installation/Operation Manual 55 PRE L IMINAR Y Personalizing the Splash Screen Using Serial Commands To personalize the start-up splash screen with th e customer nam e, Runco de aler name or any other str ing (up to 28 characters long), send th e following co mmands: • [c############################] to p[...]

Serial Communications 56 Crystal Series LCD Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Crystal Series LCD Installation/Operation Manual 57 PRE L IMINAR Y 7.1 Crystal Series LCD Specifications Table 7-1 lists th e Crystal Series LCD specific ations. 7. Specifications Table 7-1. Crystal Series LCD Specifications Native Resolution: 192 0 x 1080 Screen Size: CX-42HD/CX-OP AL42 = 42 in . (diagonal) CX-47HD/CX-OP AL47 = 47 in. (diagonal) C[...]

Specifications 58 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY Power Consumption (typical): CX-42HD/CX-OP AL42 = 130 watts (44 3.7 BTUs/hour); 5 watts in standby mode CX-47HD/CX-OP AL47 = 170 watts (580.2 BTUs/hou r); 5 watts in standby mode CX-55HD/CX-OP AL55 = 300 watts (1023.9 BTUs/hour); 6 watts in standby mode CX-65HD = 640[...]

Specifications Crystal Series LCD Installation/Operation Manual 59 PRE L IMINAR Y 7.2 Crystal Series LCD Dimensions All dimensions given he re are in millimeters. CX-42HD/CX-OPAL42 Dimensions Figure 7-1 and Figure 7-2 show the CX -42HD and CX -OPAL42 dimens ions. Figure 7-1. CX-42HD/CX-OPAL 42 Dimensions (Top/Front)  ?[...]

Specifications 60 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY Figure 7-2. CX-42HD/CX-OPAL 42 Dimensions (Rear/Side)        [...]

Specifications Crystal Series LCD Installation/Operation Manual 61 PRE L IMINAR Y CX-47HD/CX-OPAL47 Dimensions Figure 7-3 and Figure 7-4 show the CX -47HD and CX -OPAL47 dimens ions. Figure 7-3. CX-47HD/CX-OPAL 47 Dimensions (Top/Front)         [...]

Specifications 62 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY Figure 7-4. CX-47HD/CX-OPAL 47 Dimensions (Rear/Side)               «?[...]

Specifications Crystal Series LCD Installation/Operation Manual 63 PRE L IMINAR Y CX-55HD/CX-OPAL55 Dimensions Figure 7-5 and Figure 7-6 show the CX -55HD and CX -OPAL55 dimens ions. Figure 7-5. CX-55HD/CX-OPAL 55 Dimensions (Top/Front)    [...]

Specifications 64 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY Figure 7-6. CX-55HD/CX-OPAL 55 Dimensions (Rear/Side)            0  [...]

Specifications Crystal Series LCD Installation/Operation Manual 65 PRE L IMINAR Y CX-65HD Dimensions Figure 7-7 and Figure 7-8 show the CX -65HD dimensio ns. Figure 7-7. CX-65HD Overal l Dimensions (Top/Front) 1564.3 558 11 8 939.4 61 803.52 1428.48 65.4 65.4 (Active area) (Active area) 919.4[...]

Specifications 66 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY Figure 7-8. CX-65HD Overall Dimensions (Rear/Side) 310 82.6 66 166.8 400 440 180 180 100.3 6 6 ø …3.5 V entilative hole dimension V entilative hole dimension 4 4 ø …2 12 6 12 6 ø …3. 5 V entilative hole dimension ø...8 Mounting hole dimension (8x)[...]

Specifications Crystal Series LCD Installation/Operation Manual 67 PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists th e signal types sup ported by eac h input on the Crystal Series LCD. Table 7-2. Supported Signal Timings by Input Format Resolution Refresh Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) Supported? ( √ = Yes, – =[...]

Specifications 68 Crystal Series LCD Inst allation/Operation Manual P RELI M INARY 1920x1200 1920x1200 60.00 74.000 154.000 √ – √ – 480/60i 712x484 29.97 15.734 13.500 √ √ √ √ 480/60p 720x483 59.94 31.469 27.000 √ √ √ – 576/50i 720x574 50.00 15.625 13.500 √ √ √ – 576/50p 720x576 50.00 31.250 27.000 √ √ √ – 72[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-0969-01 Rev. A August 2009[...]