Runco High-Definition manual

O WNER ’ S O PERATING M ANUAL CR-26HD CR-32HDi High-Definition, Liquid-Crystal Display (LCD) Panels with[...]

[...]

Runco CR-26HD/CR -32HDi Owner’s Operating Man ual iii PRE L IMINAR Y ONE YEAR LIMITED WARRANTY For LCD Displays Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! We believe Ru nco produ ces “The World’s Fine st Home Thea ter Products.” With proper installa tion, setup and care, you s hould enjoy [...]

iv Runco CR- 26HD/CR-3 2HDi Owner’s Operating Manual PRE L IMINAR Y Runco limits its obligat ions under any im plied warran ties under state laws to a period not to exce ed the warranty pe riod. There are no expr ess warranties. Runco also ex cludes any ob ligation o n its part for incidental or consequentia l damages re lated to the failure of t[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual v PRE L IMINAR Y To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC. Attn: Customer Service Dep artment 2900 Faber St reet Union City , CA 94587 Ph: (510) [...]

vi Runco CR- 26HD/CR -32HDi Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchas e of this quality Runco produ ct! For best perf ormance, please read th is manual care fully as it is you r guide throug h the men us and op eration. 1. Read these in structions . 2. Keep these i nstructions. 3. Heed all warnings. 4. Follow all instruct[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual vii PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, a subsidiar y of Planar System s, Inc. Manufacture r’s Address: 290 0 Faber Stre et, Union City, CA 94587 hereby declare s that the p roducts Model Number s: CR-26HD, CR-32HDi conform with th e provisions of: Council Directive 2004[...]

viii Runco CR- 26HD/CR-3 2HDi Owner’s Operating Manual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply with the limits for a Class B digi tal device, p ursuant to Par t 15 of the FCC Rules. T hese limits ar e designed to p rovide reason able protection against harmf ul interference in a residential installation. This equi[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual ix 1 Table of Content s PRE L IMINAR Y ONE YEAR LIMITED WARRA NTY ....... ................ ................ ................ ................ ........... iii Important S afety In s truction s .......................... ................ ............. ............. ................ .... vi Compliance[...]

x Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 4. Operation .......... ................ ............. ................ ............. ................ ................ ............. 23 Turning on t he Power ............. ................ ............. ................ ............. ................ .......... 23 Changing the OSD [...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual xi 1 Li s t of Figure s 2-1. Crystal Series LCD Display Con trols and Indic ators .... ................ ................ ................ .. 5 2-2. Crystal Series LCD Display Rear -Panel Inputs a nd Outputs ........................... ............... 6 2-3. Crystal Series LCD Display Rem ote Contro[...]

List of Figures xii Runco CR-26HD/CR- 32HDi Owner’s Operating Manual Note s :[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and o perate the R unco CR-26HD and CR-32HDi LCD Displays. Thr oughout this manual, th e Runco CR-26HD and CR-32HDi LCD Displays are referr ed to simply as the “Crysta l Series LCD Display.” Target A[...]

Introduc tion 2 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y G raphic Convention s : These symbols appear in numerous p laces throug hout the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic informa[...]

Introd uction Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Runco presents th e high performance CR-26HD and CR-32HDi LCD Displays, pe rfect for those who deman d our award-winning flat panel perf ormance in a more intimate size than we offer with ou r larger plasma m onitors. The Cr ysta[...]

Introduc tion 4 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Parts List Your Crystal Serie s LCD Display is ship ped with the following items. If any items are missing or dam aged, please contact you r Runco dealer or Runco Custo mer Service a t (800) 23-RUNCO. • CR-26HD or CR-3 2HDi LCD Display (with Table Stand) • Remote C[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 5 PRE L IMINAR Y 2.1 Crystal Series LCD Display at a Glance Controls and Indicators Figure 2-1 sho ws the location s of the Cry stal Series LCD Disp lay controls and indicat ors. Figure 2-1. Cry s tal S erie s LCD Di s play Control s and Indicator s 1. TV/A V Button (Input S our ce S election) 2. M[...]

Controls and Functions 6 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Crystal Series LCD Display Inputs and Output s Figure 2-2 sho ws the location s of the Crystal Series LCD Display inputs and ou tputs. Figure 2-2. Cry s tal S erie s LCD Di s play Rear-Panel Input s and Output s 1. INPUT 2 S -Video Input Standard S -Video inpu[...]

Controls and Functi ons Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 7 PRE L IMINAR Y 8. DVI/Computer Input (Digital) HDCP-compliant digi tal video input for connecting a DVD p layer, person al computer or HD tune r with a DVI or HDMI outpu t. 9. Audio Input (R G B/DVI) Connect the audio output fr om your RGB o r DVI source here . 10. AT S C [...]

Controls and Functions 8 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 2.2 Crystal Series LCD Display Remote Control Figure 2-3 sh ows the Crystal Series LCD Display remot e control, and the paragr aphs that follow describe its functionality. Figure 2-3. Cry s tal S erie s LCD Di s p lay Remo te Contr ol 45 0 100 12 3 6 RGB HD TV[...]

Controls and Functi ons Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 9 PRE L IMINAR Y 1. OFF / ON Use these buttons t o turn the Crystal Series LCD Disp lay on or off. 2. Numeric Button s Use these butt ons to enter TV channel num bers or menu pass codes. Us e the 100 button to e nter channel n umbers a bove 99. Use the - button t o enter DTV[...]

Controls and Functions 10 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 6. A s pect Ratio S election B utton s : ANA (Anamorphic) For 16:9 DVDs or HDTV program material. 4X3 ( S tandar d 4:3) The input sign al is scaled to fit 4:3 displa y mode in the center of t he screen. LETBOX (Letterbox) Image in letterbox f ormat is enlarge[...]

Controls and Functi ons Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 11 PRE L IMINAR Y 11. S ound Control Butt on s : S .MODE Press this button re peatedly to scroll through the avai lable Equalizer presets (CUSTOM, STANDARD, MUSIC, FILM or SPEECH). S URRND ( S urround) Press this butto n to turn Su rround Mo de on or o ff. MT S / S AP (Multi[...]

Controls and Functions 12 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 13 PRE L IMINAR Y 3.1 Remote Control Battery Installation To install batteries in the remote co ntrol: 1. Slide th e battery cov er in the d irection of t he arrow an d remove it. 2. Insert th e included batt eries. Ensur e that the po larities corre ctly match t he and markings inside the battery [...]

Installation 14 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qui c k overview of the Cryst al Series LCD Display installation process. The sections f ollowing this one provide detailed instructions. Installation sh ould be performed by a qualified custom vide o installation specialist. Table 3-1[...]

Installation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 15 PRE L IMINAR Y 3.3 Installation Considerations Proper instal lation of your C rystal Series LCD Disp lay will ensur e the highest po ssible picture quality. Whether you are installing the Crystal Series LCD Display temporarily or permanently, you sh ould take the following into acco[...]

Installation 16 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 3.4 Connections to the Crystal Series LCD Display Proceed as follows t o connect the Crystal Serie s LCD Display to your video sources, external cont roller(s) – if present – and AC pow er. When connec ting your equipm ent: • Turn off all equip ment before m akin[...]

Installation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 17 PRE L IMINAR Y Figure 3-2. DVI Con nection s This Crystal Series LCD Display supports the VESA Display Data Channel (DDC) stan dard. This sta ndard provide s “Plug and Pla y” capability; the display and a VESA DDC-compatible computer communicate th eir setting requir ements, all[...]

Installation 18 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y R G B Connection s : The Crystal Series LCD Disp lay has an RGB inp ut for connect ing a personal c omputer; see Figure 3-3 . Figure 3-3. Analog R G B Co nnection s 1. Refer to Computer/Video Signal Compatibility on page 56 for a list of comp uter signals com patible w[...]

Installation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 19 PRE L IMINAR Y Compone nt Video Conn ection s : If you have a DVD playe r or DTV de coder with a component (YPbPr) o utput, connect it to INPUT 3 of th e Crystal Series LC D Display as shown in Figure 3-4 . Figure 3-4. Component Video Connection s Compo s ite/ S -Video Connection s [...]

Installation 20 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y MONITOR OUT Connection The Crystal Series LCD Display has a monitor out feature for conne cting a second VCR or other auxiliary eq uipment. Connec t the MONITOR OUT aud io and video jacks to the audio and video in puts of th e VCR or other equipment a s shown in Figure[...]

Installation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 21 PRE L IMINAR Y RS-232 Controller Connection Use a “null-mo dem” RS-232 c able with a 9-pin female c onnector to connect a PC or home theate r control/au tomation syste m (if present) t o the RS-232 p ort on the C rystal Series LCD Display; see Figure 3 -8 . For more in formation[...]

Installation 22 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 23 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source component s. 2. Plug the f emale end of the power c ord into the AC receptacle on the rear of the Crystal Series LCD Di splay (AC 100V ~ 240V). 3. Connec t the other e nd to your AC power sourc e. 4. Turn o n the main po wer switch a[...]

Operation 24 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 4.3 Setting the PC Display Properties To maximize imag e quality when using the Crystal Ser ies LCD Display with a personal computer, you may need to adjust the d isplay prope rties of your PC video card. T o do this: 1. Choose Sett ings from the Windows Start menu and cl[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 25 PRE L IMINAR Y 4.4 Using the On-Screen Menus To use the o n-screen menu s: 1. Press MENU to display the Main Menu. 2. To selec t a menu item, u se the up- o r down-arro w buttons ( , ) on the remote control to highlig ht it. 3. Press ENTER or the right- arrow button ( ) to access that [...]

Operation 26 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. Cry s tal S erie s LCD Di s play O S D Menu S tructure S etup OSD Language English, Français, Español, Port uguês or Deutsch PC Mode Adjust Auto Adjust H. Position V. Positio n H. Size Phase Factory P reset Caption Display (On/Off), Mode, CC On Mute (Yes/No[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 27 PRE L IMINAR Y Main Menu The Main Menu is the startin g point for acce ssing all Crystal Series LCD Display functions. (The ISF Calibrat ion menu is not a ccessible until you enter a pass code.) Source From the Main Menu, selec t Source to cho ose a video sig nal source. The active sou[...]

Operation 28 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription Anamorphic ANA Select Anamorphic to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 display. Standard 4X3 Standard 4:3 s[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 29 PRE L IMINAR Y Picture Adjust Use the controls in the Picture Adju st menu to calibr ate your Crystal Se ries LCD Display for optimum p icture quality. The Crystal Se ries LCD Display has been designe d to incorporate setup and c alibration standards establi shed by the Imaging Science[...]

Operation 30 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y PLUGE patterns v ary but gene rally consist of some comb ination of b lack, white an d gray areas against a bla ck background . The example above include s two vertical bars and four shaded boxes. Select Brightness from the Pic ture Adjust menu. Using the left- and rig ht[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 31 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patter n like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color fro m the Picture Adju st menu. While looking at the c[...]

Operation 32 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the ima ge. To ad just sharpness, select Shar pness from the Picture Adjust menu and press ENTER . On your external test p attern sourc e, select a pa ttern like the o ne shown in Figure 4-5 . Adjus[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 33 PRE L IMINAR Y S ave S etting s (n ot available for R G B input): The Crystal Series LCD Display lets you save image quality settings for each input and support ed resolution to a preset. You can recall this pres et at a later time b y simply pressing a butt on on the re mote control o[...]

Operation 34 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Chan nel To set up th e Crystal Series LC D Display chann el tuner, select T V as the sour ce. Then, select Channel f rom the Ma in Menu and press EN TER . Auto Tuning: T o have the Crystal Series LCD Disp lay automatically detect available TV or CATV channels, select Aut[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 35 PRE L IMINAR Y Time Zone: To set th e local (North America n) time zone, sele ct Time Zone from the Timer menu and press ENTE R . Use the up- or down-arro w button to select Eastern , Central, Mountain or Paci fic. Press ENTER to confir m your select ion. Setup Use the contr ols in the[...]

Operation 36 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Caption: Select Cap tion from t he Setup men u to contro l the displa y of closed captions when watching programs th at contain t hem. •D i s play: Select On or Off to control th e display of closed ca ptions. • Mode: Select one of f our captioning m odes: CC1, C C2, [...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 37 PRE L IMINAR Y • Movie Rating: Select Movie Rating from the Parental Con trol menu to block movies carrying a give n rating, to prevent child ren from wa tching movies t hat are deem ed inappropriate. These ratings have been est ablished by the M otion Picture Association of America [...]

Operation 38 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y ISF Calibration Use the ISF Calib ration menu to perform adva nced picture q uality adjustment s. Thi s menu s hould be u s ed by I S F-ce rtified technician s only . Picture Adju s t: The controls in th is menu are identica l to those in the ma in Picture Adjust menu, bu[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 39 PRE L IMINAR Y White Balance: To remove any trace of color from the white areas of the projected image, choose White Bala nce from the Picture Adjus t menu and press ENT ER . • G ain: Use the Gain c ontrols to corr ect color imbalan ces in the brig ht areas of t he image. A go od way[...]

Operation 40 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Factory Re s et: To reset all Crystal Series LCD Display settings to their factory defaults, select Factory Rese t from the ISF Calibration me nu and press ENTER . Th is command is not undoable. Use it with caution! S pla s h Duration: Use Splash Duration to control how l[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 41 PRE L IMINAR Y 4.5 Using Picture-In-Picture (PIP) To use PIP, press t he PIP ( ) b utton. The PIP windo w appears inside the main imag e window. Press PIP again to switch to side-by-side PIP mode. Press PIP again to turn PIP off. HOLD SUB P AGE CANCEL TEXT ASPECT SIZE POSITION PIP P .M[...]

Operation 42 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Press the TV/A V button ( ) to select a PIP signal source. For eac h source, Table 4-3 shows which o f the other sour ces are availa ble as a PIP sour ce. Changing the PIP Position To change the PIP win dow position, press the PO S ITION ( ) button on the rem ote control [...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 43 PRE L IMINAR Y Changing the PIP Size To change the PIP wi ndow size, press the S IZE ( ) button on the remote cont rol repeatedly to achieve the de sired window s ize. Changing the PIP Aspect Ratio To change th e aspect ratio of the PIP window from 4:3 to 16:9 or vice ve rsa, press the[...]

Operation 44 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Swappi ng the Main and PIP Images To swap the m ain and PIP imag es, press the S WAP button on t he remote c ontrol. Swappi ng the Main and PIP Audio Programs To swap the main and PIP audio progr ams, press the S . S WAP button on the remote con trol. ➤ HOLD SUB P AGE C[...]

Operation Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 45 PRE L IMINAR Y 4.6 Stereo Sound/SAP The Crystal Se ries LCD Display supports Multic hannel Television Sound (MTS), the broadcast a udio standa rd that allo ws transmission of both stere o and Seco ndary Audio Program (SAP) content. The SAP is us ually a foreign -language translation . [...]

Operation 46 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 47 PRE L IMINAR Y 5.1 Cleaning Regular cleaning will extend t he life and p erformance of the Crystal Se ries LCD Display. Before cleaning , be sure to unplug the p ower cord fro m the powe r outlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumsta nces use solven ts s[...]

Maintenance and Troubleshooting 48 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y Image is too bright and/or lacks definition in the bright areas of the image. • Contrast is set too high. • Lower the cont rast setting. Image appears “washed out” and/or dark areas appear too bright. • Brightness is set too high. • Lower[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 49 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the Crystal Series LCD Display with a h ome theater automation/cont rol system or a PC running terminal emulation soft ware, connect it to yo ur control system or PC as shown in Figure 3-8 . Configure the RS-23 2 controlle [...]

Serial Communications 50 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 0301 Select Composite Video for Input3 0303 Select Component Video for Input3 Example: [S4F0101 selects Composite video for Input1 [ S4G 000# PIP Input selection 0=TV 1=Input1 2=Input2 3=Input3 5=DVI 6=RGB Example: [S4G0003 selects Input3 [ SAB 000# Power on/o[...]

Serial Communications Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 51 PRE L IMINAR Y The following serial commands are meant to emula t e buttons on the remote control. Each button has its own serial command, so effec tively it is as if you were using the IR rem ote only you’ll be doing so via serial commands. These commands pr ovide active[...]

Serial Communications 52 Runco CR-26HD/CR-32HDi Owner’s Operating Manual PRE L IMINAR Y 0043 4X3 0039 LETTERBOX 0126 VIRTUALWIDE [ key 0007 Right-Arrow key 0016 Down-Arrow key 0018 Up-Arrow key 0011 Left-Arrow key 0046 ENTER [ key 0026 MENU [ key 0100 EXIT [ key 0063 PIP ASPECT RATIO 0047 PIP SIZE 0034 PIP POSITION 0032 PIP 0037 P.MODE 0052 S.SWA[...]

Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 53 PRE L IMINAR Y 7.1 Crystal Series LCD Display Specifications Table 7-1 lists th e Crystal Series LCD Display specifications. 7. S pecification s Table 7-1. Cry s tal S erie s LCD Di s play S pecification s Native Re s olution: 1366 x 768 WXGA S creen S ize: CR-26HD = 26 in. (diagonal) CR-32HDi =[...]

Specifications 54 Runco CR-26HD/CR-32HDi Owner’s Operating Manual P RELI M INARY 7.2 Crystal Series LCD Display Dimensions Figure 7-1 an d Figure 7-2 show the Cry stal Series LCD Disp lay dimension s. Figure 7-1. CR-26HD Dimen s ion s 27.00 in. (686 mm) 23.70 in. (602 mm) 26.00 in. (660 mm) 19.88 in. (505 mm) 7.48 in. (190 mm) 3.94 in. (100 mm) 7[...]

Specifications Runco CR-26HD/CR-32HDi Owner’s Operatin g Manual 55 PRE L IMINAR Y Figure 7-2. CR-32HDi Dimen s ion s 31.69 in. (805 mm) 26.73 in. (679 mm) 32.00 in. (813 mm) 23.03 in. (585 mm) 8.27 in. (210 mm) 3.94 in. (100 mm) 7.87 in. (200 mm) 3.86 in. (98 mm)[...]

Specifications 56 Runco CR-26HD/CR-32HDi Owner’s Operating Manual P RELI M INARY 7.3 Computer/Video Signal Compatibility The Crystal Series LCD Display ca n display video signals from a variety of computer sources via it s RGB and DVI inputs. Table 7-2 lists the signal types that are co mpatible with the Crystal Se ries LCD Display, and indicates[...]

[...]

Runco CL-810 Owner’ s Operating Manual Runco International • 2900 Faber S treet • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com SERIAL NUMBER RUMA-011 090 rev 10-22-07 v2.6[...]