Runco LS-10D manual

LS-10d DLP TM Home Theater Projector and Digital High Definition (DHD™) Controller/Scaler/Processor I NSTALLATION /O PERATION M ANUAL[...]

[...]

Runco LS-10d Installation/ Operation Manual iii PRE L IMINAR Y RuncoCare™ Standard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This RuncoCare Standard Limited Warranty is provid ed free of charge by R[...]

iv Runco LS-10d Installation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.co m or via phone at (toll free) (8 00) 23RUNCO (800-23 7-8626). If the custom[...]

Runco LS-10d Installation/Operation Manual v PRE L IMINAR Y h Expected lam p degradation and normal decrease in lamp output o ver a period of time or a s the lamp is co nsumed i Customer caused defec ts, including b ut not limite d to, scratc hed/defaced /altered plastic s j Failure to follow mainten ance procedu res as outline d in the pro duct’[...]

vi Runco LS-10d Installation/Operation Manual PRE L IMINAR Y Please visit http:// www.runco.c om/support /product-r egistration/ to r egister prod uct. RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN. RUNCO EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDIN G THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT[...]

Runco LS-10d Installati on /Operation Manual vii PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video produ ct! It has been designed to provide you with the qua lity of video that is exp ected in a home theat er. For the be st performan ce, please read this m anual carefully a s it is your gu ide through the menus and operat ion[...]

viii Runco LS-10d Instal lation/Operation Manual PRE L IMINAR Y 19. Never look directly into t he lens when the lamp is on. Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declares that the Prod ucts’ Model Number s: LS-10d conform with th e provisions of: Counc[...]

Runco LS-10d Installation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This equipmen t [...]

x Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-10d Installation/Operation Manual xi 1 Table of Contents PRE L IMINAR Y RuncoCare™ Standa rd Two Year Limited Warran ty ........ ................... ................. ....... iii Important Safety Ins tructions ...... ................. ................ ................ ................ ................ vii Compliance Information .........[...]

Table of Contents xii Runco LS-10d Inst al lation/Operation Manual PRE L IMINAR Y Installing the Optional Anamor phic Lens Mount ... ................................ ............. .......... 23 Package Cont ents .. ............. ................. ................ ................ ................ ................ 2 3 Mounting the LS-1 0d ..........[...]

Table of Contents Runco LS-10d Installation /Operation Manual xiii PRE L IMINAR Y 5. Maintenance an d Troubleshooting . ................ ................ .................... ................ ... 73 Lamp Repla cement ...... ................. ............. ................ ................ ................ ............. ... 7 3 Troubleshoo ting Tips[...]

Table of Contents xiv Runco LS-10d Instal lation/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-10d Installation/Operation Manual xv 1 List of Figures PRE L IMINAR Y 2-1. LS-10d Front/Side View ......................... ................ ................. ............ ................. ........ 5 2-2. LS-10d Rear/Bottom/ Top View . ................. ................ ................ ............. ................ ..... 6 2-3. LS-10d R[...]

List of Figures xvi Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-10d Installation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Ma nual describes how to install, set up and op erate the Runco LightStyle™ Series LS-10d Home Th eater Projec tor and DHD Controller. Throughout th is manual, the Runco LightS tyle™ Series LS-10 d Home Thea ter Projector and DHD Contr oller are ref[...]

Introduc tion 2 Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y Graphic Convention s: These symb ols appear in n umerous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic information yo[...]

Introd uction Runco LS-10d Installation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The LightStyle ™ Series LS-10d Hom e Theater Projecto r and DHD Contro ller encompasses Run co’s award-winn ing three-chip pe rformance in an elegant, sleek package. Fe ature rich, inc luding advan ced connectivity a nd the latest-g [...]

Introduc tion 4 Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y Key Features and Benefits The LS-10d o ffers these k ey features an d benefits: • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • Three-chip Digita l Light Processing (D LP™) system • Four (4) HDMI 1.3 Inputs (on DHD Co ntrolle r) with High-ban dwid th D[...]

Runco LS-10d Installation/Operation Manual 5 PRE L IMINAR Y 2.1 LS-10d at a Glance Figure 2-1 and Figure 2 -2 show the key LS-10d compo nents. Figure 2- 1. LS-10d Front/Sid e View • ST A TUS LED Indicates projector status as follows: • Solid green = AC power prese nt, ready to tur n on (lamp not lit) • Flashing green = lamp is wa rming up or [...]

Controls and Functions 6 Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y • PROJECTION LENS If needed, a ligh t shield accessory is provide d with the lens to minimize stray light emissions. (Use it only when the vert ical offset is 50% of the screen he ight or grea ter.) The light shield att aches to the end of the lens . Figure 2-2. L[...]

Controls and Functi ons Runco LS-10d Installation/Operation Manual 7 PRE L IMINAR Y • RUNCO LOGO BA DGE • REAR COVER Remove to acce ss connectors . • LAMP MODULE COVER Remove this cover to acce ss the lamp compartment . • CABLE OPENING Pass cables through this op ening. • CEILING MOUNT HOLES Use these to attach the ceiling bracket to the [...]

Controls and Functions 8 Runco LS-10d Installa tion/Operation Manual PRE L IMINAR Y 2.2 LS-10d Rear Panel Figure 2-5 shows the LS-10d rear panel. Figure 2-3. L S-10d Rear Pane l 1. DHD INPUT An HDCP-compliant d igital video input for connecting th e HDMI output fr om the DHD Controller. 2. TRIGGER 1 Provides 12 (+/- 1. 5) volt switched output for a[...]

Controls and Functi ons Runco LS-10d Installation/Operation Manual 9 PRE L IMINAR Y 2.3 DHD Controller Front Panel Figure 2-4 shows the controls and in dicato rs on the DHD Controller front panel; the paragraphs that follow de scribe them. Figure 2-4. DHD Controller Fro nt Panel 1. RUNCO ICON Lights blue to indicate tha t the contro ller is on o r [...]

Controls and Functions 10 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 7. RIGHT BUTTON Used to direct-selec t inputs or move the menu cur sor right in the O SD. When no menus are prese nt on-screen , the RIGHT button toggle s through the differen t sources, in th is order: Composite 1 - Com posite 2 - Composite 3 - Component - HD 1 - [...]

Controls and Functi ons Runco LS-10d Installation/Operation Manual 11 PRE L IMINAR Y 4. RS-232 (T o Accessory Box) A male, 9-pin D-sub connecto r for interfac ing with exter nal equipmen t. (For future use.) 5. Display Control Not used with the LS-10d. 6. IR Wired input from a Niles- or Xantech-compatib le, infrared (IR) repe ater system. It is a 3[...]

Controls and Functions 12 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 2.5 LS-10d Remote Control Unit Figure 2-6 sho ws the LS-1 0d remote co ntrol, and th e paragrap hs that follow d escribe its functionality. Figure 2-6. DHD Co ntroller/LS-10d Rem ote Control ON ISF NT VID 1 VID 2 HD 1 HD 2 VID 3 COMP ISF DA Y CUST 1 CUST 2 OFF RA T[...]

Controls and Functi ons Runco LS-10d Installation/Operation Manual 13 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is being transmitted. 2. LIGHT Press to illumina te the buttons. 3. ON / OFF Press to turn the DHD Cont roller and proje ctor on or off. 4. ENTER Press to select a highligh ted [...]

Controls and Functions 14 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 10. HD 1 (4) / HD 2 (5) Press to select a HD (RGBHV or YPbPr component ) input or to ente r the numeric character “4” or “5.” 11. COMP (Component) (6) Press to select t he Component vide o input as the source or to enter the nu meric character “6. ” 12.[...]

Runco LS-10d Installation/Operation Manual 15 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cove r in the dire ction of the arrow. 2. Insert the includ ed batteries. Ensu re that the polaritie s correctly match t he and markings inside the bat tery compartm ent. 3. In[...]

Installation 16 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gi ves a quick overview of the LS-10d installation process. The se ctions following this one provid e detailed instructions. Table 3-1. Installation Overview Step Procedure For Details, Refer to page... 1 Choose a location for the projector 17 2 Ins[...]

Installation Runco LS-10d Installation/Operation Manual 17 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensur e the quality of yo ur display. Wheth er you are installing a pr ojector tempor arily or per manently, you should take th e following into account to ensure your p rojector perfo rms optimally. [...]

Installation 18 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Ambien t Light In general, minim ize or eliminate lig ht sources dire cted at the scree n. Contrast ratio in your images will be noticeably reduced if light directly st rikes the scree n, such as when a shaft of light from a w indow or floo dlight falls on the im age. Images[...]

Installation Runco LS-10d Installation/Operation Manual 19 PRE L IMINAR Y Table 3-3 lists the av ailable lens options for th e LS-10d and their ass ociated throw r atios. Table 3-3. LS-10d Lens Opti ons and Throw Ratios (Note 1) Lens Option Throw Ratio with Primary Lens Only Throw Range in inches, with 96x54-inch (1.78:1) Screen Throw Ratio with Pr[...]

Installation 20 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Vertical and Hori zontal Position Proper placem ent of the proje ctor relative t o the screen wil l yield a rectangu lar, perfectly-cen tered image that completely f ills the screen. Ideally, the pro jector should be positioned perpendicular t o the screen and in such a way [...]

Installation Runco LS-10d Installation/Operation Manual 21 PRE L IMINAR Y Figure 3-4. Horizontal Le ns Shift (EXAMPLE ONLY) Vertical Lens Shift: The LS-1 0d zoom lenses (Prote us 2 through 6) provide up to 65% of vertical lens shift in either directio n (up or down ). For examp le, with a 96 x 54-inch (16:9) screen, you ca n shift the imag e up to [...]

Installation 22 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Folded Optics In rear scr een applications w here space b ehind the pr ojector is limited, a mirror may be used to fold the optical path, as shown in Figure 3-5. T he position of the projector a nd mirror must be ac curately set. If you are consider ing this type of inst all[...]

Installation Runco LS-10d Installation/Operation Manual 23 PRE L IMINAR Y Other Considerations Other consider ations and tips th at can help improve your installati on: • Keep the am bient temper ature cons tant and below 35°C (95°F ). Keep the pr ojector away from he ating and/ or air conditionin g vents. Chang es in tempera ture may ca use dr[...]

Installation 24 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y • Anamorphic lens and moun ting bracket Attaching the Transport Assembly Atta chment Plate: 1. Place the pro jector upside d own on a bla nket or othe r soft surface . 2. Position th e attachmen t plate as sh own here. Attachment Points for Security Hooks Attachment Points[...]

Installation Runco LS-10d Installation/Operation Manual 25 PRE L IMINAR Y 3. If you are mounting the pr ojector on a ceiling: Line up the hol es on the Ceiling Mount Plate (included with the projector ceilin g mount kit) with those on the bottom of the projecto r and attach ment plate . 4. Secure the Tran sport Assembly Attachment Plate and Ceiling[...]

Installation 26 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Installing the Anamorphic Lens Transp ort Assembly: After installing th e Transport Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the Anamorphic Lens Transport Assembly. 1. Position the f lat side of the motorized transport ag ainst the bot[...]

Installation Runco LS-10d Installation/Operation Manual 27 PRE L IMINAR Y Attaching the Securi ty Hooks: To help stabilize and su pport the a dded weight of the Anamorphic Lens and Le ns Transport Assembly, the a ttachment p late includes tw o security hooks an d related har dware for a ttaching th e front part of the plate t o the ceiling above. P[...]

Installation 28 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 3.5 Mounting the LS-10d There are se veral method s for mounting the projector . Depending on your chosen installation, one method may b e more suit able than anoth er. Floor Mounting (Upright) In typical front and rear scre en installations, th e projector can b e mounted t[...]

Installation Runco LS-10d Installation/Operation Manual 29 PRE L IMINAR Y Adjusting the Projection Angle If the LS-10d is ceiling-mounte d and the screen is significan tly lower than the projector, you can tilt the projector at a slight angle by ad justing the ce iling mount. The projecto r can be ro tated (side -to-side) up to 360 degrees and moun[...]

Installation 30 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 3.6 Connections to the LS-10d and DHD Controller Proceed as follow s to connect the DHD Controlle r to the LS-10 d, your video sour ces, external cont roller(s) – if present – and AC power . When connec ting your equipm ent: • Turn off all eq uipment before making any [...]

Installation Runco LS-10d Installation/Operation Manual 31 PRE L IMINAR Y Connecting the DHD Controller to the LS- 10d Digital Video Connection: Connect the “HDMI Out To Display” co nnector on the DHD Controller to the DHD Input of th e LS-10d as shown in Figure 3-7. Figure 3-7. Connecting th e LS-10d to the DHD Controller Use an HDMI cable for[...]

Installation 32 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controller a s shown and d escribed in th e sections th at follow. HDMI Source Connections: See Figure 3-8. Figure 3-8. HDMI Source Connections ➤ Use the HDMI inpu ts whenever possib[...]

Installation Runco LS-10d Installation/Operation Manual 33 PRE L IMINAR Y Component Video Source Connections: Connec t your c omponen t video sources to the HD1, HD2 a nd/or Compo nent/SCART inputs as shown in Figure 3 -9. Figure 3-9. Component Video Source Connections Video 1 Y Video 2 Video 3 Pr Pb Component / SCART Y G Pb B Pr R Pr R Pb B Y G TR[...]

Installation 34 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y RGBHV Source Connections: Connect person al computers and/ or other RGB sou rces to the HD1 and/or HD2 inputs as shown in Figur e 3-10. Figure 3-10. RGBHV Source Connectio ns Y G Pb B Pr R Pr R Pb B Y G H V HD1 HD2 HV or Computer RGB Camcorder Green Blue Red H-Sync V-Sync[...]

Installation Runco LS-10d Installation/Operation Manual 35 PRE L IMINAR Y SCART RGBS Source Connections: Connect the green, bl ue and red outputs from your SCART source to the Componen t/SCART input on the DHD Controller. Conne ct the sync output from your SCART source to the Vid e o 1 input on the DHD Controller. See Figure 3-11. Figure 3-11. SCAR[...]

Installation 36 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Composite Source Connect ions: See Fi gure 3-12. Figure 3-12. Composite Video Sourc e Connections RS-232 Controller Connection Use a straight-th rough, 9-pin RS-232 c able to conne ct a PC or cont rol/automatio n system (if present) to the RS-232 port on the DHD Controller; [...]

Installation Runco LS-10d Installation/Operation Manual 37 PRE L IMINAR Y Connecting 12-volt Trigger Outputs to External Equipment DHD Controller: Co nnect retractabl e screens, screen masks or other 12-volt trigger-activated e quipment to the 12-volt trig ger outputs on t he DHD Controller; see Figure 3-14. Figure 3-14. 12-volt Trigge r Output Con[...]

Installation 38 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Connecting an External IR Receiver to the DHD Controller If infrared sign als from the r emote control can not reach t he DHD Controller d ue to excessive d istance or ob structions such as walls or cab inet doors, y ou can conn ect an external IR rec eiver to the DHD Co ntr[...]

Installation Runco LS-10d Installation/Operation Manual 39 PRE L IMINAR Y Connecting to AC Power Projector/DHD Controller: Plug the female end of one power cord into the AC receptacle o n the rear o f the LS-10d (AC 10 0V ~ 240V). T hen, connect t he other end to your AC power so urce. Similarly connect the DHD Controlle r to a nearby AC outlet. An[...]

Installation 40 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 3.8 Primary Lens Adjustments To access th e motorized lens controls: 1. On the DHD Controller remote contro l or front panel, pre ss MENU . 2. Select Service from the Main Menu and en ter the Servic e Menu passcode. 3. Select Display Device from th e Service Menu . 4. Select[...]

Installation Runco LS-10d Installation/Operation Manual 41 PRE L IMINAR Y 3.10 Adjusting the Image Geometry Projector and /or screen p lacement — a mong other things — c an cause geom etric distortion in th e projected ima ge. To correct this, the DHD Co ntroller provides precise, nine-point control over the proje cted image geometr y. Use thes[...]

Installation 42 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y “Keystoning” usu ally occurs when the pro jector is tilted relative to the screen. “Pincushion ” distortion can so metimes occu r if the thr ow distance is ve ry short and/o r the projector is equipped with a n anamorph ic lens. To correct keystoning or p incushion d[...]

Installation Runco LS-10d Installation/Operation Manual 43 PRE L IMINAR Y 3.11 Installing and Adjusting the Anamorphic Lens If you are insta lling an LS-10d with a n anamorphic lens, procee d as follows to install and adjust the lens. Anamorphic Lens Installation and Adjustment Attach the ana morphic lens to the bracket using the plastic knobs supp[...]

Installation 44 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 3. Select Service from the Main Menu and en ter the Servic e Menu passcode. 4. Select Tr i g g e r s from the Service menu. 5. Assign the trig ger output to which the lens motor is c onnected to the Cinema a nd Virtual Cinema aspect ratios. This enables the lens motor to mov[...]

Runco LS-10d Installation/Operation Manual 45 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Menu , press the MENU button on the remote co ntrol (Figure 2- 6) or DHD Controller front panel (Figure 2-4). To select a menu it em, use the and buttons on the remote control or DHD Cont roller front panel to h ighlight it. Th en, to con[...]

Operation 46 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Figure 4 -1. DHD Contro ller OSD Menu Structur e for LS-10d (continued) Service Test Vide o Color Bars 1 Color Bars 2 Focus Grey Bars Input Names Rename/Res tore Display Device - Configure Installation Picture Orientation: Auto, Floor Front , Ceiling Front, Floor Rear or Ceilin[...]

Operation Runco LS-10d Installation/Operation Manual 47 PRE L IMINAR Y Main Menu The Main Menu is the startin g point fo r accessing all DHD Controller functions. (You must enter a passcode to access the Calibr ation and Se rvice menus.) Input Source From the M ain Menu, selec t Input Sou rce to choose a video signal so urce. The active so urce is [...]

Operation 48 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description 16:9 16:9 Select 1 6:9 to vie w 16:9 DV Ds and HDTV programs in their native aspec t ratio. 4:3 images are stretched horizontally to fit a 16:9 scre en. 4:3 4:3 Standard 4:3 scales the input signal to [...]

Operation Runco LS-10d Installation/Operation Manual 49 PRE L IMINAR Y Cinema CINEMA Select Cinema to view 2.35 source material in its native aspect ratio. With a 16:9 screen and a standard LS-10d (without an anamorphic lens), the upper and lower portions of the screen are masked, but the geometry of the active image area is unchanged. With a 2.35:[...]

Operation 50 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Picture Use the controls in the Pictu re Menu to ca librate each DHD Controller inpu t to achieve optimum picture qua lity. The DHD Contr oller has been de signed to incorp orate setup and calibratio n standards established b y the Imaging Science Foundat ion (ISF). The ISF has[...]

Operation Runco LS-10d Installation/Operation Manual 51 PRE L IMINAR Y PLUGE patterns va ry but ge nerally consist of so me combinat ion of black, w hite and gray areas against a blac k background. T he example above includes two vertica l bars and four shaded boxes. Select Brightne ss from the Pictur e menu and press ENTER . Adjust the brightness [...]

Operation 52 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Color Saturation: On your externa l test pattern so urce, select a c olor bar p attern like the one shown in F igure 4-4. Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturatio n and Tint 1. Press the MENU button on the remote control or DHD Controller front panel.[...]

Operation Runco LS-10d Installation/Operation Manual 53 PRE L IMINAR Y 11.Adjust the color sa turation level until the out ermost (gray and bl ue) color bars appear to be a single shade of bl ue: Tint: Tint or “hue” is essentially the r atio of red t o green in th e color por tion of the im age. When tint is dec reased, the image appears redde [...]

Operation 54 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Sharpness: “Sh arpness” is the amou nt of high-fre quency deta il in the image. To adjust sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, sele ct a pattern like the one show n in Figur e 4-5. Adjust as ne eded, loo[...]

Operation Runco LS-10d Installation/Operation Manual 55 PRE L IMINAR Y Height: Select Height from the Input Position menu to change the p rojected image height. Pres s to increa se the height; press to decrease it. Overscan/Over scan Mode: Overscan pushes the ou tside edge of th e active pictur e area of the video signal out beyond the edge of th e[...]

Operation 56 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Phase (RGB, Co mponent or SCART sources ): This control ad justs the phase of the pixel sampling clock relative to the inc oming signal. Adjust the phase wh en an RGB, Component or SCART image st ill shows shimmer or “noise” after Tracking has been optimized. For best res u[...]

Operation Runco LS-10d Installation/Operation Manual 57 PRE L IMINAR Y You should save ch anges to any of the follo wing settings to a pres et; otherwise they will be lost when a new input sour ce or resolution is selected: • Brightness •C o n t r a s t • Color saturation •T i n t • Sharpness •G a m m a • Lamp Settings • Color temp [...]

Operation 58 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Information Signal / System: Select Information from the Ma in Menu, th en choose either Signal or System to display informa tion about the curr ent input signal (resolu tion, frequency, typ e et cetera) and insta lled firmware ver sions, as well as othe r information tha t uni[...]

Operation Runco LS-10d Installation/Operation Manual 59 PRE L IMINAR Y • Gamma: Select Gamma from th e Display Color men u to choose a de-gamm a curve. Used correctly , the Gamma control can improve cont rast while mainta ining good details for b lacks and white s. If excess amb ient light washes out the image a nd it becomes difficult or impossi[...]

Operation 60 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Table 4-2 lists the x- and y-c oordinates fo r each color temperatur e preset. • ConstantContrast: Select Constant Contrast from th e Display Color m enu to enable ( On ) or disable ( Of f ) ConstantContr ast in the optical e ngine. Consta ntContrast use s a dynamic iris that[...]

Operation Runco LS-10d Installation/Operation Manual 61 PRE L IMINAR Y Table 4-3 lists the C olor Gamut settings an d associated x- and y- coordinates f or each primary and secon dary color compon ent. •P C E : To use the Personal Col or Equalizer to def ine a custom color gamut, choose the “PCE” Color Gamut se tting (refer to Color Gamut on [...]

Operation 62 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Figure 4-8 . Effect of PCE Hue an d Saturatio n Controls • White Balance: To precise ly adjust the white point associated with the custom color gamut, cho ose White Balanc e from the PCE sub -menu. These controls operate ide ntically to the Gain co ntrols in the Display Colo [...]

Operation Runco LS-10d Installation/Operation Manual 63 PRE L IMINAR Y Input Color: The Input Color co ntrols are similar to those in the Display Co lor menu (see above), but adj ust the color ba lance of the inco ming signal. These settings are al so saved independent ly for each input and disp lay mode. • Gain/Offset (HD1, HD2 and Component/SCA[...]

Operation 64 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Output S hift: The cont rols in the Outp ut Shift menu a re similar to those in the In put Position men u, except tha t they change the chara cteristics of the output signa l. These settings are saved independently for each aspect ratio . Image Alignment: Use the con trols in t[...]

Operation Runco LS-10d Installation/Operation Manual 65 PRE L IMINAR Y Input Names: You can give each DH D Controller inp ut a descriptive n ame. For exam ple, you may want to change the default input n ame to the type of source c omponent connected t o it: “VCR,” “DVD,” “Laptop” et cetera. Inpu t names can be up to 12 characters lo ng.[...]

Operation 66 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Network: The options in the Network m enu allow you to configure the ne twork communication fea tures. • IP Config uration : Select IP Configur ation from the N etwork menu to either set the IP address, subnet mask and d efault gateway of the DHD Contro ller manually or obtai[...]

Operation Runco LS-10d Installation/Operation Manual 67 PRE L IMINAR Y If you prefer to do this manually, set it to Off. The DHD Controll er w ill ask if you want to perform th e upgrade t he next time it is power-cycled. • Check For New Fi rmwar e: To have the DHD Controller check for new firmwar e on demand (an d perform an upgrade if it fin ds[...]

Operation 68 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y • Error Notification : To have th e DHD Controller se nd a message to the destinatio n e-mail address whe n a “DHD Error” or “Display Err or” occurs, sele ct Error Notification from the E-Mail No tification m enu and set it to On . • Error Notif ication to Ru nco: T[...]

Operation Runco LS-10d Installation/Operation Manual 69 PRE L IMINAR Y • Remote Network Control: Select Remote Network Cont r ol from the Networ k menu to enable or disa ble control of the DHD Controller via an IP connec tion (typically usin g a web browser) . Set it to On to allow all incoming remote network connectivity. Set it to Off to disabl[...]

Operation 70 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y • OSD Messages: When you select a new asp ect ratio, input sourc e or memory preset, the DHD Contro ller briefly displays an on-screen messag e confirming you r new selection. T o prevent the d isplay of these m essages, select OSD Messages fro m the Miscellaneou s menu to an[...]

Operation Runco LS-10d Installation/Operation Manual 71 PRE L IMINAR Y Sync Threshold: Select Sync Thre shold to adjust the thr eshold at which ne gative pulses on the com ponent video green/lum a channel are interpreted to be sync pu lses. Sync Threshold a djustment is occasionally nec essary when a DVD p layer or HDTV sourc e signal drops “belo[...]

Operation 72 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Front Panel Brightness: Select Front Panel Brightness from the Service menu to adju st the brightness o f the front-panel LED and LCD status in dicators. • Logo LED: Select Logo LED fr om the Front Panel Brightness m enu to adjust the brightness of the large, illu minated log[...]

Runco LS-10d Installation/Operation Manual 73 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically between 2000 and 4000 h ours depend ing on the Lam p Power se tting), or soo ner if a noticea ble degradation in brightness occur s. Contact your Runco dealer to obtain a replac ement lamp. [...]

Maintenance and Troublesh ooting 74 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshootin g problems you may encounter w ith the LS-1 0d. If you en counter an issue not described here, please contact Runco Technica l Support. Table 5-1. Troubleshooting Cha[...]

Runco LS-10d Installation/Operation Manual 75 PRE L IMINAR Y In addition to using the DHD Cont roller front-panel keyp ad or remote control unit, the re are three meth ods of contro lling the LS-10d a nd DHD Controlle r externally: • Using a serial (R S-232) link to sen d ASC II commands and receive responses to those commands. • Using discrete[...]

External Control 76 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Table 6-1 lists the RS-232 comman d set. The “Param eter (min/m ax)” column shows the valid parameter ranges, or “NA” for comm ands that take no para meters. When you enter a valid comma nd, the DHD Controller execute s it and acknowledges it with a plus sign on [...]

External Control Runco LS-10d Installation/Operation Manual 77 PRE L IMINAR Y Aspect Ratio Commands 16:9 NA YES Selects the 16:9 aspect ratio 4:3 NA YES Selects the 4:3 aspect ratio ASPECT? NA NA Retur ns cu rrent aspect ratio CINEMA NA YES Selects the Cinema aspect ratio LETTERBOX NA YES Selects the Letterbox aspec t ratio NATIVE NA YES Selects th[...]

External Control 78 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Image Preset Commands CUSTOM1 NA YES Loads “Custom 1” image preset CUSTOM2 NA YES Loads “Custom 2” image preset DAY NA YES Loads “ISF Day” image preset NIGHT NA YES Lo ads “ISF Night” image preset PRESET? NA NA Returns currently-selected preset (ISF Day, [...]

External Control Runco LS-10d Installation/Operation Manual 79 PRE L IMINAR Y Sleep Timer Commands SLEEPTMR? NA NA Returns sleep timer setting STOFF NA YES Sets th e sleep timer to Off ST30MIN NA YES Sets the sleep timer to 30 minutes ST60MIN NA YES Sets the sleep timer to 60 minutes ST90MIN NA YES Sets the sleep timer to 90 minutes ST2HRS NA YES S[...]

External Control 80 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 6.2 Using Discrete IR Codes The DHD Controller acce pts commands in the form of IR signals that conform to th e Phillips RC5 protocol. Ea ch DHD Controller remo te control button has an RC5 control code associated with it. You can use these codes t o program a third-part[...]

External Control Runco LS-10d Installation/Operation Manual 81 PRE L IMINAR Y Figure 6-1 shows the pulse train fo r this command (with the togg le bit set to zero). Figure 6-1. RC5 Messa ge Format IR Command List Table 6-2 lists th e RC5 contro l codes for the DHD Contro ller. S 1 S 2 TB A 4 A 3 A 2 A 1 A 0 C 5 C 4 C 3 C 2 C 1 C 0 Start Bits Toggle[...]

External Control 82 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 16:9 0x3449 0x3 C49 16:9 aspect ratio 4:3 0x344A 0x3C4A 4:3 aspect ratio CINEMA 0x346C 0x3C6C Cinema aspect ratio COMP 0x344E 0x3C4E Component video input CUST 1 0x3472 0x3 C72 Custom 1 memory preset CUST 2 0x3473 0x3 C73 Custom 2 memory preset DOWN 0x3446 0x3 C46 Down-A[...]

External Control Runco LS-10d Installation/Operation Manual 83 PRE L IMINAR Y ST90MIN 0x34 63 0x3C63 Sets th e sleep timer to 90 minutes ST2HRS 0x3464 0x3 C64 Sets the sleep timer to 2 hours ST4HRS 0x3465 0x3 C65 Sets the sleep timer to 4 hours UP 0x3445 0x3C45 Up-Arrow ( ) VID 1 0x344D 0x3C4D Composite v ideo input 1 VID 2 0x3458 0x3C58 Composite [...]

External Control 84 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y 6.3 Using HDMI CEC Messages The DHD Controller accept s and can respond to CEC comma nd messages from a disc player, satellite re ceiver or DVR/set-to p bo x via an HDMI connec tion. Using CEC, the DHD Controller can perform the following actions: • Turn itself a nd th[...]

External Control Runco LS-10d Installation/Operation Manual 85 PRE L IMINAR Y Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version 0x9F – √ Abort Message 0xFF – √ User Control Pressed 0x44 – √ User Control Released 0x45 – √ Give OSD Name 0x46 – √ Menu Request 0x8D – √ Give Device Po wer Status 0x8F[...]

External Control 86 Runco LS-10d Inst allation/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-10d Installation/Operation Manual 87 PRE L IMINAR Y 7.1 LS-10d Specifications Table 7-1 lists the LS- 10d specifications. 7. Specifications Table 7-1. LS-10d Specifications Projector Type: Digital Ligh t Processing™ (DLP ), 3-c hip, 16:9 S uperOnyx™ DMD™ Native Resolution: 1,920 x 1,080 (2,073,60 0 pixels) Aspect Ratios: Refer to Tab[...]

Specifications 88 Runco LS-10d Inst allation/Operation Manual P RELI M INARY Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifications - Brightness: 119 foot-Lamberts (fL) - Contrast Ratio: 251:1 These measurements are taken from the projector in a controlled, home theater environment. Al l measurements are made to ANSI/NAP[...]

Specifications Runco LS-10d Installation/Operation Manual 89 PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Cont roller specifications. Table 7-2. DHD Cont roller Specifications Aspect Ratios: 4:3, Letterbox, 16:9, VirtualW ide, Cinema, Virtual Cinema, Native Video Standards: NTSC, PAL, SECAM, ATSC Inputs: (3) Composite (1[...]

Specifications 90 Runco LS-10d Inst allation/Operation Manual P RELI M INARY 7.3 LS-10d Dimensions Figure 7-1 shows the LS-10d dimensions, in [millime ters] and inches. Figure 7-1. LS- 10d Dimensio ns 25.30 642.6 5.20 132.0 8.34 21 1.9 .50 (ADJUST ABLE) 12.8 REMOV ABLE REAR COVER 20.47 519.9 10.23 259.9 3.93 99.9 3.93 99.9 7.08 179.9 5.91 150.0 6.3[...]

Specifications Runco LS-10d Installation/Operation Manual 91 PRE L IMINAR Y 7.4 Supported Timings Table 7-3 lists the signal types suppo rted by each inp ut on the DHD Controlle r. Table 7-3. Supported Signal Timings by Input Format Resolution Refresh Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) Supported? ( √ = Yes, – = No) HD 1 [...]

Specifications 92 Runco LS-10d Inst allation/Operation Manual P RELI M INARY 1280x1024 1280x1024 60.00 63.981 108.000 √√√ – – 75.00 79.976 135.000 √√√ – – 85.00 91.146 157.500 √√√ – – 1360x768 1360x768 60.00 47.712 85.500 √√√ – – 1400x1050 1400x1050 60.00 64.744 101.000 √√√ – – 60.00 65.317 121.750 [...]

Specifications Runco LS-10d Installation/Operation Manual 93 PRE L IMINAR Y PAL-M – 59.94/60.00 15.734/15.750 3.580 –––– √ PAL-N – 5 0.00 15.625 3.580 –––– √ SECAM – 50.00 15.625 13.500 ––– √√ Table 7-3. Supported Signal Timings by Input (continued) Format Resolution Refresh Rate (Hz) Horizontal Frequency (kHz) P[...]

Specifications 94 Runco LS-10d Inst allation/Operation Manual P RELI M INARY Notes:[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1073-00 Rev. A September 20 10[...]