Runco LS-HB manual

LS-HB High-Brightness, Full-HD Home Theater Projector I NSTALLATION /O PERATION M ANUAL[...]

[...]

Runco LS-HB Installation/Operation Manua l iii PRE L IMINAR Y RuncoCare™ Standard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This RuncoCare Standard Limited Warranty is provid ed free of charge by Ru[...]

iv Runco LS-HB Installation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.co m or via phone at (toll free) (8 00) 23RUNCO (800-23 7-8626). If the custome[...]

Runco LS-HB Installation/Operation Manu al v PRE L IMINAR Y h Expected lam p degradation and normal decrease in lamp output o ver a period of time or a s the lamp is co nsumed i Customer caused defec ts, including b ut not limite d to, scratc hed/defaced /altered plastic s j Failure to follow mainten ance procedu res as outline d in the pro duct’[...]

vi Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y Please visit http:// www.runco.c om/support /product-r egistration/ to r egister prod uct. RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN. RUNCO EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDIN G THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT[...]

Runco LS-HB Insta llation /Operation Manual vii PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video produ ct! It has been designed to provide you with the qua lity of video that is exp ected in a home theat er. For the be st performan ce, please read this m anual carefully a s it is your gu ide through the menus and operat ion.[...]

viii Runco LS-HB Installa tion/Operation Manual PRE L IMINAR Y 19. Never look directly into t he lens when the lamp is on. Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declares that the Prod ucts’ Model Numbers: LS-HB conform with th e provisions of: Council [...]

Runco LS-HB Installation/Operation Manu al ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This equipmen t [...]

x Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-HB Installation/Operation Manu al xi 1 Table of Contents PRE L IMINAR Y RuncoCare™ Standa rd Two Year Limited Warran ty ........ ................... ................. ....... iii Important Safety Ins tructions ...... ................. ................ ................ ................ ................ vii Compliance Information .........[...]

Table of Contents xii Runco LS-HB Installa tion/Operation Manual PRE L IMINAR Y Mounting the LS-H B .............. ................ ................ ............. ................ ................. ...... 27 Floor Mount ing (Upright) ............. ................ ................ ............. ................ ............. 27 Ceiling Moun ting (I[...]

Table of Contents Runco LS-HB Insta llation /Operation Manual xiii PRE L IMINAR Y 5. Maintenance an d Troubleshooting . ................ ................ .................... ................ ... 71 Lamp Repla cement ... ................ ................. ................ ............. ................ ................ ... 71 Troubleshoo ting Tips [...]

Table of Contents xiv Runco LS-HB Installa tion/Operation Manual PRE L IMINAR Y Notes:[...]

Runco LS-HB Installation/Operation Manual xv 1 List of Figures PRE L IMINAR Y 2-1. LS-HB F ront/Side View ....... ................ ................ ................ ................ ............. ............ 5 2-2. LS-HB Re ar/Bottom/To p View ................... ................ ................ ................ ................ .. 7 2-3. LS-HB R[...]

List of Figures xvi Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y 4-15. LS-HB Service Menu ......... ................ ................ ................ ................ ................. ...... 68 7-1. LS-HB Dim ensions .... ................ ................. ............ ................. ................ ................ ... 90[...]

Introd uction Runco LS-HB Installation/Operation Manu al 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and opera te the Runco LS-HB Digital Light Processing ( DLP™) Projector. Throughout th is manual, the Runc o LightStyle™ Series L S-HB Home The ater Projector is referred t o as the “LS-HB.?[...]

Introduc tion 2 Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y Graphic Convention s: These sym bols appear in n umerous plac es throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic information yo[...]

Introd uction Runco LS-HB Installation/Operation Manu al 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Elegant and ele ctrifying, the LightStyle™ Se ries LS-HB Home The ater Projector is Runco’s first-ever 1080p projec tor designed for both pe rformance and esthetics. W here sleek design en compasses in credible perfor mance, this sty[...]

Introduc tion 4 Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y Key Features and Benefits The LS-HB offers th ese key features and be nefits: • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • DLP system using high-performance Digital Micromirror Device (DMD) • Customized color wheel p roduces wide dynamic rang e and ric[...]

Controls and Functi ons Runco LS-HB Installation/Operation Manu al 5 PRE L IMINAR Y 2.1 LS-HB at a Glance Figure 2-1 and Figure 2-2 show the key LS-HB compone nts. Figure 2-1. LS-HB Front/Side View • TOP IR SENSOR Receives infrare d signals from the remot e control unit. • POWER BUTTON/ST A TUS LED Indicates projector status as follows: • Sol[...]

Controls and Functions 6 Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y • ZOOM RING Rotate this to change the pr ojected ima ge size. • FRONT IR SENSOR Receives infrar ed signals fro m the remote cont rol unit. • INT AKE VENT Internal fans d raw cool air in to the projecto r through this ve nt. • SYSTEM KEYP AD Provides an alte r[...]

Controls and Functi ons Runco LS-HB Installation/Operation Manu al 7 PRE L IMINAR Y Figure 2-2. LS-HB Rear/Bottom/Top View 2 6 3 7 1 5 4[...]

Controls and Functions 8 Runco LS-HB Inst allation/Operation Manual PRE L IMINAR Y 1. RUNCO LOGO BADGE Remove to access the vertical lens shift contro l. 2. REAR COVER Remove to acce ss connectors . 3. LAMP MODULE COVER Remove this cover to ac cess the lamp compa rtment. 4. CABLE OPENING Pass cables th rough this opening. 5. CEILING MOUNT HOLES Use[...]

Controls and Functi ons Runco LS-HB Installation/Operation Manu al 9 PRE L IMINAR Y 2.2 LS-HB Rear Panel Figure 2-3 shows the LS-HB r ear panel. Figure 2-3. LS-HB Rear Panel 1. HDMI 1 (Digital) HDMI 2 (Digital) HDCP-compliant digital v ideo inputs for co nnecting an HDM I or DVI source. 2. RGB Provides a standa rd, 15-pin VGA-styl e connection to e[...]

Controls and Functions 10 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 7. IR INPUT Wired input from a Niles- or Xantech-co mpatible, infrared (I R) repeat er system. 8. TRIGGER 1 (3.5 -mm, mini phono j ack) Provides 12 (+/- 1.5) volt switched output for screen relays with 250mA current capacity and short prote ction. 9. RS-232 A female,[...]

Controls and Functi ons Runco LS-HB Installation/Operation Manual 11 PRE L IMINAR Y 5. Aspect Ratio Selection Bu tton Press this button re peatedly to selec t one of the foll owing aspect rati os: 16 : 9: For viewing 16:9 DVDs or HDTV program s in their nat ive aspect ra tio. Letterbox: For viewing LaserDisc movies o r non-anamorphic DVDs o n a 16:[...]

Controls and Functions 12 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Installation Runco LS-HB Installation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Slide the bat tery compartm ent cover in t he direction o f the arrow to remove it. 2. Install two AA batt eries with the correct polarity. 3. Replace the co ver. Notes on Batteries • Make sure that the batte[...]

Installation 14 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y • The projector’ s front IR receiver has a ra nge of approximat ely 40 feet (12.19 meters); the top IR re ceiver has a range of ap proximately 20 feet (6.1 0 meters). Figure 3-1 shows the rec eption angles of the front an d top IR rece ivers. Figure 3-1. IR Reception Angle[...]

Installation Runco LS-HB Installation/Operation Manual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick o verview of the LS-HB installation process. The sections following this one prov ide detail ed instruc tions. Installation shou ld be performed by a quali fied custom video installation specialist. Table 3-1. Installation Overview Step [...]

Installation 16 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 3.3 Installation Considerations Proper insta llation of your p rojector will e nsure the qu ality of your display. Wh ether you are installing a pr ojector tempo rarily or perman ently, you shou ld take the following into account to ensure your proj ector perform s optimally. [...]

Installation Runco LS-HB Installation/Operation Manual 17 PRE L IMINAR Y Ambient Light In general, minimize or eliminat e light so urces direct ed at the scre en. Contrast r atio in your images will be noticeably reduc ed if light directly st rikes the screen, such as when a sh aft of light from a window o r floodlight falls on the image. Im ages m[...]

Installation 18 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Table 3-3 lists the available LS-HB lens opti ons and their asso ciated throw ratio s. Vertical and Hori zontal Position Proper placem ent of the proje ctor relative t o the screen will yield a rectangula r, perfectly-cen tered image that completely f ills the screen. Ideally,[...]

Installation Runco LS-HB Installation/Operation Manual 19 PRE L IMINAR Y Figure 3-3. Pr ojector Placement Lens Shift You can use th e lens shift cont rols on the pro jector to center the image on the screen. Lens shift is generally exp ressed as a p ercentage of the screen he ight or width, as shown in Figure 3-4. Figure 3-4. Vertical Lens Shift (E[...]

Installation 20 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Folded Optics In rear-scre en applications wh ere space behin d the projector is limited, a mirr or may be used to fold the optical path, as shown in Figure 3-5. T he position of the projector a nd mirror must be ac curately set. If you are considerin g this type of insta llat[...]

Installation Runco LS-HB Installation/Operation Manual 21 PRE L IMINAR Y 3.4 Installing the Optional Anamorphic Lens Mount If you are insta lling a standard LS-HB (without an an amorphic lens), sk ip this step and proceed with Mounting the LS-HB (page 27). If you are installing a n LS-HB with a fixed anamorphic lens, pr oceed with Installing the Fi[...]

Installation 22 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y • Anamorphic lens and moun ting bracket Attaching the Transport Assembly Atta chment Plate: 1. Place the pro jector upside d own on a bla nket or othe r soft surface . 2. Position th e attachmen t plate as sh own here. Attachment Points for Security Hooks Attachment Points f[...]

Installation Runco LS-HB Installation/Operation Manual 23 PRE L IMINAR Y 3. If you are mounting the pr ojector on a ceiling: Line up the hol es on the Ceiling Mount Plate (included with the projector ceilin g mount kit) with those on the bottom of the projecto r and attach ment plate . 4. Secure the Tran sport Assembly Attachment Plate and Ceiling [...]

Installation 24 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Installing the Anamorphic Lens Transp ort Assembly: After installing th e Transport Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the Anamorphic Lens Transport Assembly. 1. Position the f lat side of the motorized transport ag ainst the bott [...]

Installation Runco LS-HB Installation/Operation Manual 25 PRE L IMINAR Y Attaching the Securi ty Hooks: To help stabilize and support the a dded weight of the Anamorphic Lens and Le ns Transport Assembly, the a ttachment p late includes tw o security hooks an d related har dware for a ttaching th e front part of the plate t o the ceiling above. Pro[...]

Installation 26 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Installing the Fixed Anamorphic Lens Base Plate To install the ba se plate on an LS-HB with a fixed anamorphic lens: 1. Place the pro jector upside d own on a bla nket or othe r soft surface . 2. Secure the base plate and Ce iling Mount Plate (if used) to the projector with th[...]

Installation Runco LS-HB Installation/Operation Manual 27 PRE L IMINAR Y 3.5 Mounting the LS-HB There are se veral methods fo r mounting t he projector. D epending on your chosen installation, one method may be more suit able than a nother. Floor Mounting (Upright) In typical front an d rear screen installa tions, the projec tor can be moun ted to [...]

Installation 28 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Adjusting the Projection Angle If the screen is sig nificantly higher or lower than the proje ctor, you can also t ilt the projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For a floor inst allation, turn the adjust able feet a[...]

Installation Runco LS-HB Installation/Operation Manual 29 PRE L IMINAR Y 3.6 Connections to the LS-HB Proceed as follo ws to conne ct the LS-HB to your video sour ces, external c ontroller(s) – if present – and AC power. When connect ing your equipmen t: • Use the corr ect signal cable s for each so urce. • Ensure th at the cables a re secu[...]

Installation 30 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Connecting Source Components to the LS-HB Connect your vid eo sources to t he LS-HB as shown and describe d in the sections that follow. HDMI/DVI Connections: Se e Figure 3-8. Figure 3-8. HDMI/DVI Source Connections ➤ Use the HDMI inpu ts whenever possib le. This ensure s th[...]

Installation Runco LS-HB Installation/Operation Manual 31 PRE L IMINAR Y RGBHV Connections: Conn ect your pers onal computer or other RGB source to the RGB input. See Figure 3-9. Figure 3-9. RGB Connections or Computer RGB Camcorder[...]

Installation 32 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y SCART RGBS Connection: If the source o utputs RGB with c omposite sync, connect the green, b lue and red outputs to the Y, Pb and Pr ter minals on the COMPONENT 1/SCART input and the sync ou tput to the VIDEO input. See Figu re 3-10. Figure 3-10. SCART RGBS Connection Gaming C[...]

Installation Runco LS-HB Installation/Operation Manual 33 PRE L IMINAR Y Compone nt Video Conn ections: Connect your c omponent video sources to the COMPONENT 1/SCART or RG B inputs as sh own in Figure 3-11. Figure 3-11. Compone nt Video Connections Y P B P R COMPONEN T VIDEO OUT BD/DVD DTV -Set-Top Box (DTV -STB)[...]

Installation 34 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Composite/S-Video Connections: Connect your Compos ite and S-Video so urces to the LS-HB a s shown in Figur e 3-12. Figure 3-12. Composite and S- Video Connections Gaming Console VCR Camcorder S-Video Composite S-Video Composite[...]

Installation Runco LS-HB Installation/Operation Manual 35 PRE L IMINAR Y RS-232 Controller Connection Connect a PC o r home theate r control/au tomation syste m (if present) t o the RS-232 por t on the LS-HB; see Figure 3-13. Use a sta ndard, 9-pin serial ca ble, wired stra ight-throu gh. For more in formation abou t using this con nection, refer t[...]

Installation 36 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Connecting 12-Volt Trigger Output to External Theater Equipment If your LS-HB is e quipped with a movable ana morphic lens, OR if your home theater contains a re tractable scre en, screen m ask or other 1 2-volt trigger-act ivated equipme nt, connect the se devices to the TRIG[...]

Installation Runco LS-HB Installation/Operation Manual 37 PRE L IMINAR Y Connecting an External IR Receiver If infrare d signals from th e remote cont rol cannot reach the proj ector due to ex cessive distance or obstru ctions such as walls or cabin et doors, you can connect an ext ernal IR repeater system to the IR INPUT on the LS-HB to e xtend th[...]

Installation 38 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 3.7 Turning on the Power 1. Turn on your sour ce component s. 2. Press the ON button on the remote control to t urn on the LS -HB. The LED flashes green to indicat e that it is warming up. 3. When the proj ector is ready fo r use, the LED t urns off. 3.8 Primary Lens Adjustmen[...]

Installation Runco LS-HB Installation/Operation Manual 39 PRE L IMINAR Y 3.9 Changing the OSD Language When you turn on th e LS-HB for the fir st time, the OSD La nguage Menu appe ars. The LS-HB ca n display the menu s in English, French , German, Italian, Span ish, Swedish, Traditional Chinese , Simplified Chinese, Ja panese, Korean, Po rtuguese o[...]

Installation 40 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 3.11 Installing and Adjusting the Anamorphic Lens If you are in stalling an LS-HB w ith an anamo rphic lens, proceed as follows to in stall and adjust that len s. Fixed Anamorphic Lens The fixed anamorphic lens mount kit consists of e verything show n in Figure 3-16 . Some com[...]

Installation Runco LS-HB Installation/Operation Manual 41 PRE L IMINAR Y 1. Use the Height/Pit ch Adjustment Scre ws ( 3 ) and Washer s ( 2 ) to attach the Lens Mounting Bracket ( 5 ) to the Anamorphic Lens ( 1 ). 2. Remove the nut and rubber collar fr om each Swell Latch Asse mbly ( 4 ). 3. Secure the len s (with the mo unting bracket attached) to[...]

Installation 42 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 4. Then, adjust the anamorph ic lens angle so that t he projected im age is rectangula r: The anamorphic lens will almost always be angled with respect to the projector; th is is normal. 5. When the heig ht and angle are properly set, tighten th e Height/Pitch Ad justment Scre[...]

Installation Runco LS-HB Installation/Operation Manual 43 PRE L IMINAR Y 2. Tighten the k nobs. 3. Adjust the rota tion of the Lens Transport Assem bly so that the left and right side s of the image ar e an equal distance from their respective s creen bord ers. 4. Tighten the Pivot Screw an d the four moun ting screws holdi n g the transpo rt to th[...]

Installation 44 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Operation Runco LS-HB Installation/Operation Manual 45 PRE L IMINAR Y 4.1 Selecting Video Memory Press M1, M2 or M3 to recall settings fro m a memory p reset. Then, press ENTER to confirm your sele ction. Or, to cancel the op eration, pre ss to select Cancel and press ENTER . You can assign each of these three butt ons to any of four memory presets[...]

Operation 46 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 4.4 Using Picture-In-Picture (PIP) For PIP purpo ses, there are three grou ps of inputs separated by th eir displa y modes: • Video (SD) group: Video, S-Video an d SCART inputs. • Graphic (HD) group: Component 1 and RGB inputs. • Digital Video group: HDMI 1 and HDMI 2 input[...]

Operation Runco LS-HB Installation/Operation Manual 47 PRE L IMINAR Y 4.5 Using the On-Screen Menus 1. Press the MENU button on the remote control or system keypad to display the Main Menu. 2. There are six menus. Pres s or to se lect a sub-menu . 3. Press or to select a sub-menu item. 4. For each sub -menu item, the current ly-selected value appea[...]

Operation 48 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Main The LS-HB Main Menu, shown in Figure 4-2, p rovides access to the most commonly-used pr ojector functions. Figure 4-2. LS-HB Main Menu ➤ Image controls only opera te on the active source. To adju st the PIP source, switch to th e PIP source (thereby making it the active so[...]

Operation Runco LS-HB Installation/Operation Manual 49 PRE L IMINAR Y Aspect Ratio: To change the aspect r atio (size and sh ape) of the pr ojected imag e, press or to h ighlight Aspect Ratio. Use the or buttons to sele ct the approp riate aspect ratio f or your screen size, installed lens c onfiguration a nd the type of program material being view[...]

Operation 50 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Letterbox Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on all sides) to fill a 16:9 display, cropping the top and bottom of the image. 16:9 4:3 4:3 Narrow 4:3 Narrow linearly scales the source active image horizontally, so that a 4:3 source has the[...]

Operation Runco LS-HB Installation/Operation Manual 51 PRE L IMINAR Y Native Select Native to display the source si gnal in its native reso lution, centered in the display area with no re-sizing or overscan. This means, fo r example, that 720p HDTV programs will display with unused pixels on all sides: 320 on the left and right sides and 180 above [...]

Operation 52 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Memory: Select Memory fr om the Main menu , then press ENTER to recall image q uality settings previously sa ved, or to s ave changed settings in any of fo ur memory loc ations. • Recall Memory: Select Rec all Memory from the Memory menu to recall saved image quality settings. [...]

Operation Runco LS-HB Installation/Operation Manual 53 PRE L IMINAR Y Brightness: On your external test pattern sour ce, select a PLUG E pattern. (PLUG E is an acronym for “Picture Line-Up Generation Equipme nt.”) Figure 4-3 shows a typical PLUG E pattern. Figure 4-3. Typical PLUGE Pattern for Adjusting Brightnes s PLUGE patterns va ry but ge n[...]

Operation 54 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Color: To adjust the o verall color inte nsity, sele ct Color from the Ma in menu. Decrea se this setting if colors are overly satu rated; increase it if colors appear m uted or washed ou t. Color Tint: Tint or “hue” is th e ratio of r ed to gr een in the co lor portion of th[...]

Operation Runco LS-HB Installation/Operation Manual 55 PRE L IMINAR Y • Sharpness Mode: Sharpness Mode allow s or prevents access to the detailed sharpness contro ls in this menu. In most cases, Simple mode provides a su fficient level of control to pro duce the best picture from th e most popular sou rces. In Simple mode , only the Sharpness (t [...]

Operation 56 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Overscan: Some television programs are produ ced based on the assumpt ion that older television sets may not displa y the outer edge s of the broadcast picture area . Overscan effectively hides t hese inactive, o uter edges of th e image. Cho ose one of the following: •O f f : [...]

Operation Runco LS-HB Installation/Operation Manual 57 PRE L IMINAR Y Figure 4-7. Source Select Sub-Menu PIP Select: To select a PIP (seconda ry) video sour ce, press or to hig hlight PIP Select, then pr ess ENTER . The default PIP selection is Off . All sources that are not availabl e per the source enable functi on (refer to Source Enable on page[...]

Operation 58 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Advanced Use the contro ls in the Advanced me nu, shown in Figu re 4-8, to perfo rm advanced image adjustments. Figure 4-8. LS-HB Advanced Menu Color Space: Select Color Space from th e Advanced menu to cho ose the color space of the source signal for HDMI, RGB, and component con[...]

Operation Runco LS-HB Installation/Operation Manual 59 PRE L IMINAR Y Video Standard: Select Video Standard fr om the Advanc ed menu to sp ecify the co lor system for composite video or S-Video input signals. Different count ries use differen t formats for video signals. Sele ct the appr opriate Video Standard for your region: •A u t o : The colo[...]

Operation 60 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y RGB Adjust: To remove any trace of c olor from the white a reas of the p rojected im age, choose RGB Adju st from the Advan ced menu and p ress ENTER . This displays the RGB Adjust sub-menu, shown in Figure 4-9. Figure 4-9. RGB Adjust Sub-Menu •G a i n : Use the Gain c ontrols [...]

Operation Runco LS-HB Installation/Operation Manual 61 PRE L IMINAR Y Fine Sync: To fine-tune the p osition and o ther image attributes, choose Fine Sy nc from the Advanced m enu and press ENTER . This di splays the Fine Sy nc sub-menu , shown in Figure 4-10. Figure 4-10. Fine Sync Sub-Menu • V Position: This control adjusts the vertical position[...]

Operation 62 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y is consistent acr oss the screen, that aspect rat io is maintained a nd that pixel pha se (see above) ca n be optimized. • Sync Level (Component source s only): Select Sync Level to ad just the voltage level of the LS-HB Sync signal detection circuitry. Sync Level ad justment i[...]

Operation Runco LS-HB Installation/Operation Manual 63 PRE L IMINAR Y Source Enable: To enable or disable selectio n of a source, choose Sourc e Enable from the System me nu and press ENTER . This displays th e Source Enable sub-menu, sho wn in Figure 4-12. Figure 4-12. Source Enable Sub-Menu • H D M I1 / H D M I2 : En ables or disa bles the HDMI[...]

Operation 64 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y PIP Position: To change the position of th e PIP image, choose PIP Positi on from the System menu; see Figure 4-13. Choose one o f the following: • Top Left : This places the PIP source into a 6 44x362 designated image area at the top left of the scr een. •T o p R i g h t : T[...]

Operation Runco LS-HB Installation/Operation Manual 65 PRE L IMINAR Y Figure 4-14. PIP Split-Screen Mode Menu Position: Select Menu Positio n from the Sy stem menu to change the OSD menu position. The default setting is “ “ (top left). Translucent Menu: Select Translucent Menu f rom the System m enu to adjust th e degree of t ranslucence (sho w[...]

Operation 66 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Control Select Contro l from the Main Menu to set var ious options rela ted to control of the projector . 1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assign the function of the keys numbered 1 through 5 on the re mote. There are eight sources correspo nding to the ei [...]

Operation Runco LS-HB Installation/Operation Manual 67 PRE L IMINAR Y • RS232 causes the port to outp ut 12 volts when an RS232 scre en trigger 1 “on ” command is re ceived and stop w hen a trigger 1 “off” com mand is received. The 12 volt output also st ops when the p rojector is turned o ff. Remote Code Set: Select Remote Code Set from [...]

Operation 68 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Service Access the Service M enu, shown in Figure 4-15, to view information that u niquely identifies your p rojector and ind icates its current operational stat us: • Model Nam e • Unit Serial Numbe r • Software Versio n • Active/PIP Source • Pixel Clock • Signal For[...]

Operation Runco LS-HB Installation/Operation Manual 69 PRE L IMINAR Y Lamp Hour Reset: When you replace th e projector lamp (refer to Lamp Replacement on page 71 ), you should also reset the lamp hour counter. To do this, sele ct Lamp Hou r Reset from th e Service menu, th en press ENTER . Press ENTER again to co nfirm the reset. Or, to cancel the [...]

Operation 70 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y To turn test patterns off, p ress any key ot her than or on the rem ote control unit or built-in keypad. Altitude: Select Altitude from the Servic e Menu to control the o peration of the projec tor’s cooling fan. In most cases, the default setting ( Auto ) will maintain the cor[...]

Maintenance and Troubleshooting Runco LS-HB Installation/Operation Manual 71 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically 2000 hou rs), or sooner if a no ticeable degrad ation in br ightness occur s. Contact you r Runco deale r to obtain a repl acement lamp. 1. Turn off the projec[...]

Maintenance and Troubleshooting 72 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for troubleshooting pr oblems you may encounter w ith the LS-HB . If the sugges ted solutions fail to resolve the problem o r if you encounter a n issue not described her e, please con tact[...]

Maintenance and Troubleshooting Runco LS-HB Installation/Operation Manual 73 PRE L IMINAR Y Colors in the image are swapped; for example, reds appear blue or vice versa. •T h e R e d / P r , G r e e n / Y o r Blue/Pb outputs from t he source are connected to the wrong inputs on the LS-HB. • Ensure that the source outputs are connected to the co[...]

Maintenance and Troubleshooting 74 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Serial Communications Runco LS-HB Installation/Operation Manual 75 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the LS-HB with a home theater automation/control syst em or a PC running terminal e mulation sof tware: 1. Connect it to your co ntrol system or PC as shown in Figure 3-13. 2. Start a terminal se ssion on your [...]

Serial Communications 76 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Table 6-1 lists t he serial comm and key names and IR code s. Table 6-1. Serial Command Key Names and IR Codes RS232 Keyname Remote Button IR Code Description Set 1 Set 2 pow.on 0x01 0xB7 Turn power on. src.sw (none) 0x02 0xB8 Switch to the next source. pow.off 0x09 0[...]

Serial Communications Runco LS-HB Installation/Operation Manual 77 PRE L IMINAR Y gam.crt (none) 0x86 0xC 6 Switch to CRT gamma (2.5). gam.film (none) 0x87 0xC7 Switch to Fil m gamma (2.2). gam.vide (none) 0x88 0xC 8 Switch to Video gamma. gam.brig (none) 0x89 0xC 9 Switch to Bright Room gamma (2.0). src.1 0x8B 0xCB Switch the active source to sour[...]

Serial Communications 78 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Operations Commands Op erations commands allow more flexible a nd direct cont rol of the proj ector. The synt ax for operations commands is as f ollows: op <operation> <command>[CR] (Precede <operation> an d <command> with a space.) The comma n[...]

Serial Communications Runco LS-HB Installation/Operation Manual 79 PRE L IMINAR Y Table 6-2 lists the valid operation s commands. For a ll but Execute fun ctions, the respon se from the pro jector is t he comman d and “= <value>” where <value> is the current v alue or “NA” if th e value is not av ailable. For Execu te functions [...]

Serial Communications 80 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y save.isf = 0 = ISF Day 1 = ISF Night bright contrast saturat tint sharp.simple = ? + - 0 - 20 0 sharp.mode = ? 0 = Simple 1 = Advanced horiz.sharp vert.sharp diag.sharp sharp.over horiz.text vert.text diag.text text.over noise.thresh = ? + - 0 - 200 Advanced Sharpness[...]

Serial Communications Runco LS-HB Installation/Operation Manual 81 PRE L IMINAR Y resync (execute) color.space = ? 0 = Auto 1 = REC709 2 = REC601 3 = RGB-PC 4 = RGB-Video video.stand = ? 0 = Auto 1 = NTSC 2 = PAL 3 = SECAM gamma = ? 0 = CRT (2.5) 1 = Film (2.2) 2 = Video 3 = Bright (2.0) dlp.frame = ? 0 = Auto 2 = 48 Hz 3 = 50 Hz 4 = 60 Hz satco = [...]

Serial Communications 82 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y trans.menu = ? 0 = 0% 1 = 25% 2 = 50% 3 = 75% blank.screen = ? 0 = Black 1 = Blue 2 = White 3 = Logo auto.pow.off = ? 0 = Off 1 = On auto.pow.on = ? 0 = Off 1 = On rear.proj = ? 0 = Off 1 = On ceil.mode = ? 0 = Off 1 = On 2 = Auto power.chime = ? 0 = Off 1 = On 1.key [...]

Serial Communications Runco LS-HB Installation/Operation Manual 83 PRE L IMINAR Y soft.version ? <string> act.source pip.source ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPrPb 1 5 = S-video 6 = Video 7 = SCART h.refresh ? <number> kHz v.refresh ? <number> Hz pixel.clock ? <number> MHz signal ? <string> lamp.hours ? <numbe[...]

Serial Communications 84 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y RS-232 Error Codes If an errcode ? command returns o ne of the follow ing values, yo u have encou ntered a likely system error requiring the attention of a qualified servic e technician. Try resetting the projector by power ing it off, allowing it to co ol and powerin[...]

Serial Communications Runco LS-HB Installation/Operation Manual 85 PRE L IMINAR Y 7 Fan 1 failed. 8 Fan 2 failed. 9 Fan 3 failed. 10 Fan 4 failed. 11 Fan 5 failed. 12 Fan 6 failed. 15 DDP3021 communication fai lure upon system power-up. 16 Lamp failed to ig nite (thr ee atte mpts) upon system power-up. 17 Lamp failed during operation. 18 Ballast UA[...]

Serial Communications 86 Runco LS-HB Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Specifications Runco LS-HB Installation/Operation Manual 87 PRE L IMINAR Y 7.1 LS-HB Specifications Table 7-1 lists the LS-HB sp ecificat ions. 7. Specifications Table 7-1. LS-HB Specifications Signal Compatibili ty Video Supp ort: HDMI and DVI with HDCP for digital video, Component and RGB HDTV (1080p, 1080i, 720p), Component and RGB EDTV (576p, 4[...]

Specifications 88 Runco LS-HB Installation/Operation Manual P RELI M INARY Performance Microdisplay: Texas Instruments DLP® 1080p DMD Native Resolution: Full HD, 1920 x 1080 (2,073,600 pixels) Aspect Ratios: Native (Pixel-to-Pixel), 16:9, Letterbo x, 4:3, 4:3 Narrow, Letterbox (Anamorphic lens compatible) Throw Ratios: Refer to Table 3-3 Vertical [...]

Specifications Runco LS-HB Installation/Operation Manual 89 PRE L IMINAR Y General Dimensions: 20.8" (530mm) L x 17.9" (455mm) W x 7.8" (200mm) H (see Figure 7-1) Weight (without lens): 24.3 lbs. (11.00 kg ) Operating Temperature: 50°F to 95°F (1 0°C to 35°C) Operating Altitude: Sea Level - 10,000 feet (3,048m) Operating Humidity[...]

Specifications 90 Runco LS-HB Installation/Operation Manual P RELI M INARY 7.2 LS-HB Dimensions Figure 7-1 shows the LS-HB dimensions, in millimeters. Figure 7-1. LS-HB Dimensions 150 160 CEILING MOUNT HOLES M4 x 10mm MAXIMUM (4x) 75 135 530 200 455 80 LENS CENTER LINE APPROXIMATE CENTER OF GRAVITY[...]

Specifications Runco LS-HB Installation/Operation Manual 91 PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types suppo rted by each input on t he LS-HB. Table 7-2. Supported Signal Timings by Input Format Resolution Refresh Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) Supported? ( √ = Yes, – = No) RGB Component HD[...]

Specifications 92 Runco LS-HB Installation/Operation Manual P RELI M INARY 1080/50p 1920x1080 50.00 56.250 1 48.500 √√ √ – 1080/60p 1920x1080 59.94/60.00 67.433/67.500 148 .350/148.500 √√ √ – NTSC 3.58 – 59.94/60. 00 15.73 4/15.750 3.580 – – – √ NTSC 4.43 – 59.94/60. 00 15.73 4/15.750 4.430 – – – √ PAL-B/G – 50[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1093-00 Rev. A November 2010[...]