English dropdown-ico

Runco SC-30d manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Runco SC-30d, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Runco SC-30d one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Runco SC-30d. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Runco SC-30d should contain:
- informations concerning technical data of Runco SC-30d
- name of the manufacturer and a year of construction of the Runco SC-30d item
- rules of operation, control and maintenance of the Runco SC-30d item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Runco SC-30d alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Runco SC-30d, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Runco service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Runco SC-30d.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Runco SC-30d item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    SC-30d and SC-35d Active 3D Home Theater Projector and DC-300 Dimension Digital Controller I NSTALLATION /O PERATION M ANUAL[...]

  • Page 2

    [...]

  • Page 3

    Runco SC-30d/SC-35d Installa tion/Opera tion Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchas e of a Runco® produ ct! With proper installa tion, setup and car e, you should enjoy m any years of unpara lleled video p erformanc e. This Limited Warranty is provided fr ee of ch arge by Runc o [...]

  • Page 4

    iv Runco SC-30d/SC-35d Inst allation /Operation Manual PRE L IMINAR Y • In the event of a product defec t, please follo w the claim pr ocedure provid ed below: A. Register your p roduct if you have not yet done so. Visit http://ww w.runco.com /support/p roduct-reg istration/ to register the p roduct. B. Contact your o riginal authorized d ealer o[...]

  • Page 5

    Runco SC-30d/SC-35d Insta llation /Operation Manual v PRE L IMINAR Y 4. Damage, det erioration, or malfunction re sulting from: A. Accident, abus e, misuse, neg lect, imprope r ventilation, fire, water, disa ster, lightning, or other acts of nature, sm oke exposure (cigarette or otherwise), unaut horized produc t mo dification (including use o f an[...]

  • Page 6

    vi Runco SC-30d/SC-35d Inst allation /Operation Manual PRE L IMINAR Y Runco offers e xtended and e xpanded se rvice plans. Fo r information on additional p roduct prote ction, please a sk your authorized Run co dealer , email service orders@runc o.com or c all (toll free) (800 ) 23RUNCO (800-23 7-8626). RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPL[...]

  • Page 7

    Runco SC-30d/SC-35d Installa tion/Opera tion Manual vii PRE L IMINAR Y Thank you fo r your purch ase of this qua lity Runco video produc t! For the b est performa nce, please read this ma nual carefully as it is your guid e through t he menus and o peration. 1. Read th ese instruct ions. 2. Keep th ese instruction s. 3. Heed all warnings. 4. Follow[...]

  • Page 8

    viii Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Please read an d make sure you understan d the follow ing safety inform ation before using the product for viewing 3D con tent. Provide this infor mation to the e nd users of this product an d ensure tha t they unders tand it. IMPORTANT HEALTH AN D SAFETY INFORMATION FOR 3D VIE[...]

  • Page 9

    Runco SC-30d/SC-35d Installa tion/Opera tion Manual ix PRE L IMINAR Y Manufacturer’s Name: Run co International, LLC Manufacture r’s Address: 119 5 NW Compto n Drive, Beaverto n, OR 97006 -1992 hereby declares that the Prod ucts’ Model Numbers: SC-30d, SC-30d/Cin eWide, SC-30d/CineWid e with AutoSco pe, SC-35d, SC-35d /CineWide and SC-35d/Cin[...]

  • Page 10

    x Runc o SC-30d/SC-35d Inst allation/Operati on Manual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply w ith the limits fo r a Class B d igital device , pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reas onable protect ion against har mful interference in a residential installation. This equipm[...]

  • Page 11

    Runco SC-30d/SC-35d Installa tion/Opera tion Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................ ............. .............. iii Important S afety In s truction s .......................... ............. ............. ................ ............. ...... vii Compliance Informat[...]

  • Page 12

    Table of Contents xii Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Installation Consid erations ................ ................ ............. ................ ............. ................ 21 Pre-Wiring for 3D: Run Dual H DMI Cables ..... ............. ................ ................ .......... 21 Installation Ty pe .....[...]

  • Page 13

    Table of Contents Runco SC-30d/SC-35d Installa tion/Opera tion Manual xiii PRE L IMINAR Y Primary Lens Ad justments: F ocus, Zoom and Positio n ..... ................ ............. ............. 51 Focus ......... ............ ................. ............. ............ ................. ............ ............. .......... 51 Zoom ..............[...]

  • Page 14

    Table of Contents xiv Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 6. External Control ............... ................ ............. ................ ................ ............. ........... 105 Serial or TCP/IP Co mmunications .............. ............ ................. ............ ................. .... 105 RS-232 Conn[...]

  • Page 15

    Runco SC-30d/SC-35d Insta llation /Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. SC-30d/ SC-35d Active 3 D Projection System Block Diagram ............. ................. ........ 5 2-2. SC-30d/ SC-35d Fron t/Bottom/ Side/Top View s ...... ............. ................ ............. ............ 6 2-3. SC-30d/ SC-35d Rea r Panel ...[...]

  • Page 16

    List of Figures xvi Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3-28. Image Alignmen t Controls ........................ ............ ................. ............ ................. ...... 54 3-29. Cylindrical Anamorp hic Lens Mounting Assembly - Ex ploded View ........... ................ 55 3-30. Attaching the Anamorphic L[...]

  • Page 17

    Introd uction Runco SC-30d/SC-35d Insta llation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual descr ibes how to in stall, set up and operate th e Runco SC-30d/SC-35d Active 3D Pro jection System . Throughout th is manual, the Runco SC-30d/SC-3 5d Active 3D Proj ection System is referred to as the “SC-30d/SC-35d.?[...]

  • Page 18

    Introduc tion 2 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous plac es througho ut the manual, to emp hasize points that you must k eep in mind to avoid proble ms with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic infor[...]

  • Page 19

    Introd uction Runco SC-30d/SC-35d Insta llation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Offering the b est in high-end lu xury projection , the new Signa ture Cinema™ SC-30d/SC-35d Active 3D Pro jection System expand s Runco’s most prestigi ous line of custom-built perso nal cinema projecto rs. In concert wit h [...]

  • Page 20

    Introduc tion 4 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Key Features and Benefits The SC-30d/SC-35 d offers thes e key featur es and be nefits: • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • Three-chip Digita l Light Processing (D LP™) system • DisplayPort 1.1a Input (on Dim ension Digital Con trol[...]

  • Page 21

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 5 PRE L IMINAR Y A SC-30d/SC-35d Active 3D Projection Syste m consists o f the following components: • The projector (equipped with dual digit al video inputs) with op tional anamorph ic lens and lens trans port assembly. • The DC-300 Dimens ion Digital Controller™ un it that [...]

  • Page 22

    System Overview 6 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y 2.1 Projector A SC-30d/SC-35d Active 3D Projection Syst em can display both traditional 2 D and stereoscopic 3D video co ntent. An active 3D pr esentation req uires a specialized v ideo signal so urce config uration and content to be displayed corr ectly. Images fr[...]

  • Page 23

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 7 PRE L IMINAR Y 1. PROJECTION LEN S The inside o f the lens b arrel is th readed to a ccommod ate a standa rd, 72-mm lens filter. For examp le, with a smaller screen you can install a neutral-de nsity filter to reduce the overa ll light output. 2. VERTICAL LEN S S HI F T CONTRO L T[...]

  • Page 24

    System Overview 8 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y 1. R S 232 (Contr ol) A female, 9-pin D-su b connector that provides a serial commun ication link to th e Dimension Digital Controller, via its Pri. Di s play Control output (see Figure 2 -5). 2. 3D LED Lights green when the projector is displaying 3D co ntent. 3. [...]

  • Page 25

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 9 PRE L IMINAR Y 2.3 DC-300 Dimension Digital Controller The Dimension Digital Contr oller provides “left-eye” and “r ight-eye” video sig nals and the OSD menu to t he projector . It controls th e other sys tem componen ts in respon se to user input via the following interfa[...]

  • Page 26

    System Overview 10 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 6. DOWN BUTTON Use to direct-se lect aspect ratios or move the menu curso r down in the OSD. Wh en no menu is p resent on-scree n, this b utton toggles through asp ect ratios in the following orde r: 16:9 - 4:3 - Letterbo x - VirtualWide - Cinema - Virtual Cinema [...]

  • Page 27

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 11 PRE L IMINAR Y Rear Panel Layout Figure 2-5 sho ws the rear con nector panel o n the Dimension Digital Controller. Figure 2-5. DC-300 Dimen s ion Digital Controller Rear Panel 1. MAIN POWER S WITCH Disconnects or ap plies power to t he Dimension Digital Controller. 2. 3D S ync Ou[...]

  • Page 28

    System Overview 12 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 11. Di s playPort DisplayPort 1.1a and DisplayPort-HDCP 1. 1 complia nt, SD/HD inpu t for co nnecting SDTV, EDTV or HDTV c omponent video sources. 12. HD1 / HD2 In (15-p in VGA) Two inputs for connecting stand ard-definition (SD = 480i/576i), enh anced-definition [...]

  • Page 29

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 13 PRE L IMINAR Y 2.4 SC-30d/SC-35d Remote Control Unit Figure 2-6 sho ws the SC-30d/SC -35d remote control, and the pa ragraphs tha t follow describe its functionality. Figure 2-6. Dimen s ion Digital Controller Re mote Cont rol Unit for S C-30d / S C-35d The SC-30d/SC-35d remo te [...]

  • Page 30

    System Overview 14 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is being tr ansmitted. 2. OFF ( S tandard) / S leep Timer = 30 Minute s (Extended) Press to turn off the Dimensio n Digital Controlle r and projecto r. In extended mode , press[...]

  • Page 31

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 15 PRE L IMINAR Y 5. Numeric Button s ( S tanda rd) Use these butt ons to enter numeric ch aracters (0 . .. 9), such as when chan ging remote con trol codes (refer to Remote Control on page 87). Numeric Button s (Extended) In extended m ode, press a numbered b utton to selec t a vid[...]

  • Page 32

    System Overview 16 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 9. MENU Press this button t o access th e OSD controls, or to exit the c urrent menu and retur n to the previous one. 10. Cur s or Button s (, , , ) Use these buttons to select items or sett ings, adjust setti ngs or switch display patterns. When no menu is p rese[...]

  • Page 33

    System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 17 PRE L IMINAR Y 14. 3D Mode Selection Buttons: 3D AUTO Press to set the 3D Mode to Auto . 3D SBS (Side-by-Side) Press to set the 3D Mode to 3D Side-by-Side . 3D T AB (T op-and -Bottom) Press to set the 3D Mode to 3D T o p-and- Bottom . 3D FP (Frame Packing) Press to set the 3D Mod[...]

  • Page 34

    System Overview 18 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Note s :[...]

  • Page 35

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 19 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cover in the dir ection of the ar row. 2. Insert the incl uded batter ies. Ensure tha t the polari ties correctly match the and markings inside the battery[...]

  • Page 36

    Installation 20 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qu ick overview of the SC-3 0d/SC-35d installation process. The sections following this one provid e detailed instructions. Table 3-1. In s tallation Overview S tep Procedure For Detail s , Refer to page... 1 Choose a location for th[...]

  • Page 37

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 21 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensure the quality of yo ur display. Wh ether you are installing a pr ojector temp orarily or p ermanently, yo u should t ake the following into account to ensure your p rojector per forms opt[...]

  • Page 38

    Installation 22 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Throw Distance Throw distance is the distanc e measured from the front of the projecto r to the screen. This is an impo rtant calculat ion in any p rojecto r installation as it de termines whether or not you have enough roo m to install your projector wit h a desired[...]

  • Page 39

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 23 PRE L IMINAR Y Table 3-3 lists the available lens op tions for the SC-30d/SC-35 d and their associated throw ratios. Table 3-3. Len s Option s and Throw Ratio s Len s Option (Note 2) Throw Ratio with Primary Len s Only Throw Range in inche s , with 108 x 60.75-inch (1.78:1) S creen [...]

  • Page 40

    Installation 24 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Vertical and Ho rizonta l Position Proper placem ent of the proje ctor relative t o the screen wil l yield a rectangu lar, perfectly-cen tered image that complet ely fills the scree n. Ideally, the pro jector should be position ed perpendi cular to the sc reen and in[...]

  • Page 41

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 25 PRE L IMINAR Y Figure 3-4. Horizontal Le n s S hift (EXAMPLE ONLY) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of lens shift. Lenses vary in their shift capabili ties. No part icular lens or project[...]

  • Page 42

    Installation 26 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Table 3-4 lists the lens shift limits for each available SC-30d/SC- 35d lens, as pe rcentages and absolu te measur ements with a 108 x 60. 75 inch (1.78 :1) screen. Folded Optics In rear-scre en applications where space be hind the pro jector is limited, a mirror may[...]

  • Page 43

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 27 PRE L IMINAR Y Audio/Video Synchronization Issues Due to its extraordinarily high level of video processing pe rfo rmance, the Dim ension Digital Controller may distribute video signals with a pe rceptible level of audio latency. In order to easily solve t his issue, Runco r ecommen[...]

  • Page 44

    Installation 28 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Other Considerations Other considerations and ti ps that can help i mprove your installati on: • Keep the ambient tem perature co nstant and below 35°C (95°F). Keep the projecto r away from he ating an d/or air con ditioning ven ts. Changes in temperatu re may ca[...]

  • Page 45

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 29 PRE L IMINAR Y 6. Hold the le ns assembly with the mot or facing right (toward the Runco logo). Carefully insert the back of th e lens assembly into the hole in the lens flange . 7. Secure the lens to the projector using the six (6), 9/64” Hex Mounting Screws (two each at 12 o&apo[...]

  • Page 46

    Installation 30 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.5 Installing the Optional CineWide Lens Mount If you are in stalling a stan dard SC-30d/SC -35d (without a n anamorph ic lens), skip this step and procee d with Mounting the SC-30d/SC- 35d (page 34). If you are installing an SC-30d/ SC-35d/CineWide, pr oceed with I[...]

  • Page 47

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 31 PRE L IMINAR Y Remove Projector F ront Feet: Place the projector upsid e down on a blanket or oth er soft surface. Use a Phillips screwdri ver to loosen the screws attaching th e two front feet to the projector . Then, remove the feet. In s tall Ceiling Mount Adapter s /Projector S [...]

  • Page 48

    Installation 32 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y In s tall Len s Motor: Position the AutoSco pe Lens Motor as shown in Fig ure 3-8. Line up the mounting h oles on the len s motor hous ing with those on the unde rside of the projector. Secu re the motor to the projector wi th the four remain ing Pan-Head Ph illips s[...]

  • Page 49

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 33 PRE L IMINAR Y Installing the Fixed CineWide Base P late To install the fixed C ineWide base plate on a SC-30d/SC-35d /CineWide: 1. Place the proje ctor upside d own on a b lanket or o ther soft surfa ce. 2. Place the CineWide base plate on the bottom of the pro jector. 3. If you ar[...]

  • Page 50

    Installation 34 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.6 Mounting the SC-30d/SC-35d There are se veral method s for mountin g the projec tor. Dependin g on your ch osen installation, one method ma y be more suit able than ano ther. Floor Mounting (Upright) In typical front and rear scre en installations, th e projector[...]

  • Page 51

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 35 PRE L IMINAR Y 3.7 Mounting the Dimension Digital Controller The Dimension Di gital Control ler unit c an be plac ed on any fl at, stable su rface such as a shelf or table, or it can be rack-mounte d using the supp lied mountin g hardware. Place it in a location t hat provides e asy[...]

  • Page 52

    Installation 36 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.8 System Interconnections Proceed as follo ws to connect the SC-30d/SC-35d system component s to each other and to AC po wer. When connec ting your equip ment: • Turn off all eq uipment before making an y connections. • Use the cor rect signal cables for each s[...]

  • Page 53

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 37 PRE L IMINAR Y Figure 3-13 show s how to con nect the Dimensio n Digital Controller to the projector. Figure 3- 13. Conn ecting th e Dimen s ion Digital Controller to the Projector Runco recommen ds using the RS-23 2 communicatio n link between the SC-30d/SC-35 d projector and the D[...]

  • Page 54

    Installation 38 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Connecting an Audio Processor or Secondar y Display Device to the Dimension Digital Controller (Optional) The Dimension Digital Controlle r provides a s econd HDMI output (labeled HDMI Out (Audio Only) ) for connectio n to an audio receiver/switc hing system or sec o[...]

  • Page 55

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 39 PRE L IMINAR Y Additional Connections to the Dimension Digital Controller (Optional) The Dimension Di gital Control ler provide s the followi ng interf aces to exter nal equipmen t that allow it to control or be controlled by tha t equipment: • An RS-232 interface to a PC or co nt[...]

  • Page 56

    Installation 40 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Connecting 12-volt Trigger Output s to External Equipment: If your SC-30d/SC-35d is equipped w ith an anam orphic le ns, connect the +12V T rigger Input on the lens transport to a 12-volt trig ger output on the Dimensio n Digital Controller; see Figure 3-16. Similarl[...]

  • Page 57

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 41 PRE L IMINAR Y Connecting an External IR Receiver to th e Dimen s ion Digital Controller: If infrared signals from th e remote co ntrol cann ot reach t he Dimension Digit al Controller du e to excessive dista nce or obstr uctions such a s walls or cabi net doors, you can connect an [...]

  • Page 58

    Installation 42 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Ethernet Network Connection: Use a standard, Cat egory 5 netw ork cable with an RJ-45 plug to connect a ne twork hub, r outer or ga teway to the Ethernet port on the Dimension Digita l Controlle r; see Figure 3-18. Figure 3-18. Ethernet Ne twork Connection to Dime n [...]

  • Page 59

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 43 PRE L IMINAR Y Connecting Source Components to the Dimension Digital Controller Connect your video sources to the Dimens ion Digital Cont roller as sho wn and de scribed in the sections that follow. Di s playPort S ource Connection: See Figure 3-19. Figure 3-19. Di s pla yPort S our[...]

  • Page 60

    Installation 44 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y HDMI S ource Connection s : See Figure 3-20. Figure 3-20. HDMI S ource Conn ection s Use the HDMI inpu ts whenever p ossible. This ensu res the highest video quality because the sign al is carried in the digital doma in throughout the entire sign al path, from source[...]

  • Page 61

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 45 PRE L IMINAR Y Compone nt Video S ource Connection s : Conn ect your componen t video sources to the HD1, HD2 a nd/or Compo nent/SCART input s as shown in Figure 3-21. Figure 3-21. Compone nt Video S ource Connection s USB T o Accessory Box Video 1 Y Video 2 Video 3 Pr Pb HDMI 1 HDM[...]

  • Page 62

    Installation 46 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y RGBHV S ource Connection s : Connect personal computer s and/or othe r RGB sources to the HD1 and/or HD2 inputs as shown in Figur e 3-22. Figure 3-22. RGBHV S ource Conne ction s Video 1 Y Video 2 Video 3 Pr Pb Component / SCART TRIGGERS 12 3 HD1 3D SYNC HD2 DisplayP[...]

  • Page 63

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 47 PRE L IMINAR Y S CART RGB S S ource Connection s : Connect the gre en, blue a nd red ou tputs from your SCART source to the Comp onent/SCART input on the Dimensio n Digital Contro ller. Connect the sync output from you r SCART source to the Vi d eo 1 input on the Dimension Digital C[...]

  • Page 64

    Installation 48 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Compo s ite S ource Connection s : Se e Figure 3-24 . Figure 3-24. Co mpo s ite Video S ource Connec tion s USB Video 1 Y Video 2 Video 3 Pr Pb HDMI 1 HDMI 2 Component / SCART TRIGGERS 12 3 HD1 3D SYNC HD2 DisplayPor Y Pr P b US B H DMI 1 HDMI 2 T R I GG ER S 12 3 HD[...]

  • Page 65

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 49 PRE L IMINAR Y Connecting the Active 3D Emitter to the Dimension Digital Controller Connect the 3D S YNC IN port on th e emitter to the 3D S YNC conn ector on the Dimension Digital Controller, as shown in Figure 3-25. Figure 3-2 5. Active 3 D Emitter C onnection Connecting to AC Pow[...]

  • Page 66

    Installation 50 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.9 Turning on the Power 1. Power up your sour ce compo nents. 2. If this is an AutoScope-eq uipped proje ctor, turn on the main powe r switch at the r ear of the AutoSco pe lens motor. The lens motor power switch is located next to the AC input (see Fig ure 3-16). 3[...]

  • Page 67

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 51 PRE L IMINAR Y 3.10 Primary Lens Adjustments: Focus, Zoom and Position Lens zoom an d focus are motorized ad justments th at are adju stable usin g the remo te control (Figure 2-6). This allows yo u to adjust the focus and ima ge size while at the screen for more ac curate re sults.[...]

  • Page 68

    Installation 52 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.11 Adjusting the Picture Orientation By default, th e SC-30d/SC-35d is conf igured for a “floor/front” inst allation, in which the projector is installe d upright and in front of t he screen. If it is installed behind th e screen and/or mounted on a ceiling, yo[...]

  • Page 69

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 53 PRE L IMINAR Y 3.12 Adjusting the Image Geometry Projector and /or screen p lacement — among other things — can cause geometric distortion in th e projected im age. To correct this , the Dimension Digital Contro ller provides prec ise, nine-point cont rol over the projecte d ima[...]

  • Page 70

    Installation 54 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y “Keystoning” usu ally occurs when the pro jector is tilted relative to the screen. “Pincus hion” distortion can so metimes occu r if the t hrow distance is very short an d/or the pro jector is equipped with a n anamorph ic lens. To correct keystoning or pincu[...]

  • Page 71

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 55 PRE L IMINAR Y 3.13 Installing and Adjusting the CineWide Anamorphic Lens If you are installing an SC-30d /SC-35d/CineWide or SC-30d /SC-35d/CineWide with AutoScope, pro ceed as follows to install and ad just the secon dary anamorph ic lens. Cylindrical Anamorphic Lens Installation [...]

  • Page 72

    Installation 56 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Attach Len s Mounting A ss embly to Len s Motor Carriage P late: 1. Remove the tw o Yaw/X Adjustm ent Levers an d Washers ( 8 ) from the bottom of th e Anamorphic Lens Hold er ( 6 ). 2. Place the Anamo rphic Len s Holder on to p of the Au toScope Carriag e Plate or F[...]

  • Page 73

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 57 PRE L IMINAR Y Configure Len s Motor Trigger on Dimen s ion Digital Controller: The anamorphic lens solutio n for the SC-30d /SC-35d maintai ns constant image height indepe ndent of t he aspect ratio, whil e using the full display resoluti on of the projector. It accomplishes this b[...]

  • Page 74

    Installation 58 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Adju s ting the Height (Y): With the white field still on-screen , loosen the Height/Y Adjust ment T-Scre ws on either side o f the lens. Th en, slowly move the anamorphic lens into plac e so that the re are no sh adows on the top or bo ttom of the screen: When the h[...]

  • Page 75

    Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 59 PRE L IMINAR Y Yaw Adju s t: Loosen the Y aw/X-Adjustment Levers to allow the len s to pivot freely from side to side. The n, angle the lens to even o ut any left-to-ri ght pincushion distortion: Once the proper lens a ngle has be en set, firmly tighten the Y aw/X-Adjustment Le vers[...]

  • Page 76

    Installation 60 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Note s :[...]

  • Page 77

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 61 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Me nu, press the MENU button o n the remote control or Dim ension Digital Controlle r front pane l (Figure 2-4 ). To select a m enu item, use the and buttons on t he remote c ontrol or Dime nsion Digital Controlle r fron[...]

  • Page 78

    Operation 62 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Figure 4-1. S C-30d/ S C-35d O S D Menu S tructur e (continued) S ervice Test Vide o Color Bars 1 Color Bars 2 Focus Grey Bars Full White Primary / Second ary / Dual Alignment 3D Input Names R ename/Restore Remote Contr ol Remote Code 00000 ... 08209 ... 65535 or 88999 [...]

  • Page 79

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 63 PRE L IMINAR Y Main Menu The Main Menu is the startin g point for accessing all Dimension Digital Controller functi ons. (You must enter a passcode to access the Ca libration and Service menus.) Input Source From the M ain Menu, selec t Input So urce to cho ose a video sig nal source. [...]

  • Page 80

    Operation 64 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Aspect Ratio To change the asp ect ratio (size and shape) of the proj ected image, select Aspect Ratio from the Main Menu and press ENTER . Select the appropri ate aspect rat io for your screen size and the t ype of program mate rial being viewed; refer t o Table 4-1. T[...]

  • Page 81

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 65 PRE L IMINAR Y Letterbox LET BOX Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on al l sides) to fill a 16:9 display. Letterbox is best suited for viewing LaserDisc movies or “full-screen” DVDs on a 16:9 screen. VirtualWide V-WIDE VirtualWide scales a[...]

  • Page 82

    Operation 66 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Screen The Screen Menu allows you to recall multiple sets of stored value s for certain controls (Output Shift, Image Alignment and Screen Masking) th at are saved for each a spect ratio. Such settings are al so saved “per screen. ” To recall the Ou tput Shift and I[...]

  • Page 83

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 67 PRE L IMINAR Y Picture Use the controls in the Pict ure Menu to calibrat e each Dimension Dig ital Controller inp ut to achieve optimu m picture qu ality. The Dimension Di gital Control ler has b een designed t o incorpor ate setup and calibra tion standards establi shed by the Imagin [...]

  • Page 84

    Operation 68 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Brightne ss : On your external te st pattern so urce, select a PLUGE pattern. (PLUGE is an acronym for “Pictur e Line-Up Generat ion Equipment.”) Figure 4-2 shows a typical PLUG E pattern. Figure 4-2 . Typical PL UGE Patter n for Adju s ting Brightne ss PLUGE patter[...]

  • Page 85

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 69 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patter n like the one shown in F igure 4-4. Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint 1. Press the MENU button on the remote co ntrol or Dimensi on Digit[...]

  • Page 86

    Operation 70 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 11.Adjust the color sa turation le vel until the outermost (gray and blue) colo r bars appear to be a single shade of blue : Tint: Tint or “hue” is esse ntially the ratio of red to gr een in the color port ion of the image. When tint is dec reased, the imag e appear[...]

  • Page 87

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 71 PRE L IMINAR Y S harpne ss : “Sharpness” is the a mount of hig h-frequency de tail in the ima ge. To adjust sharpness, select Sharpness from the Picture men u and press ENTER . On your external test pattern source, select a pattern like the one show n in Figure 4-5. Adjust as nee d[...]

  • Page 88

    Operation 72 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Input Position Use the contro ls in the Input Po sition Menu to fine-tun e the aspect ra tio and image position for the current source. Left/Right: Select Left/Right from the Input Positio n menu to sh ift the project ed image horizontally. Press to shift th e image to [...]

  • Page 89

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 73 PRE L IMINAR Y Figure 4-6. Over s can Mode s Pha s e (RGB, Component or S CART s ource s ): This control adju sts the phase of the pixel sampling cloc k relative to the in coming signal. Adj ust the phase when an RGB, Component or SCART image still shows shimme r or “noise” after T[...]

  • Page 90

    Operation 74 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Memory Presets For each input , the Dimension Digital Contro ll er lets you save imag e quality settings as presets that you can recall at a later time . You can create up to four presets per input and display mode (resolution and frame rate). The Dimension Digit al Con[...]

  • Page 91

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 75 PRE L IMINAR Y To reset the Cu stom 1 or Cu stom 2 mem ory preset t o its factory-defa ult state, sele ct it, press or to highlight Re set and press ENTER . 3D Processing Select 3D Proce ssing from the Main Menu to se t the followin g options rela ted to formatting and delivery of HDMI[...]

  • Page 92

    Operation 76 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Sleep Timer Select Sleep Timer from the Main Me nu to turn off the SC-30d/S C-35d after a specified interval. Press or to select Of f, 30 Minut es, 60 Minute s, 90 Minutes, 2 Hours or 4 Hours. Then, pr ess ENTER. Information S ignal / S y s tem: Select Infor mation from[...]

  • Page 93

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 77 PRE L IMINAR Y Calibration Use the Calibrat ion menu to p erform advanc ed picture qua lity adjustments. Thi s menu s hould be u s ed by I S F-certified technician s only . To recall the ISF N ight or ISF Da y settings, select “ISF Night” or “ISF D ay” from the Memory Presets m[...]

  • Page 94

    Operation 78 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • Color Temp: Select Color Temp from the Display Colo r - Common Settings menu to adjust the co lor temper ature. Co lor temper ature esta blishes the “colo r of gray” by adjusting th e 75% white point to vario us color po ints. What are “color point s ?” A ?[...]

  • Page 95

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 79 PRE L IMINAR Y Table 4-2 lists the x- and y-coordina tes for each color temperatur e preset in “Simple” mode. • Color Gamut: Select Color Gamut from the Display Color - Common Settings men u to select a color gam ut (range) that may be diffe rent from the defau lt color gamut. Ea[...]

  • Page 96

    Operation 80 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Table 4-3 lists th e Color Gamu t settings and associated x- and y-co ordinates for each primary and secondary co lor compon ent. •P C E : To use th e Personal Co lor Equalizer to def ine a custom color gamu t, choose the “PCE” Color Gam ut settin g (refer to Colo[...]

  • Page 97

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 81 PRE L IMINAR Y The Auto Color Enable and Te s t Patt ern E nable che ckboxes let you cho ose what to display on-scree n while making t hese adjustment s. These contr ols work together as follows: • YCM (Yellow, Cyan, Magenta): To precisely adjust the secondary color poin ts associate[...]

  • Page 98

    Operation 82 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •C o n s tantContra s t ( S C-30d only): Select ConstantCo ntrast from the Display Co lor - Projector Setting s menu to enable ( On ) or disable ( Of f ) ConstantCont rast in the optical engine. Const antContrast u ses a dynami c iris that mo dulates light to the DMD [...]

  • Page 99

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 83 PRE L IMINAR Y Copy/Pa s te - Memory Pre s et: You can copy and paste settings from on e memory preset to an other. Th is gives you a convenient starting point for creating a new pres et based on an existing one , to make the calibration pr ocess less tim e-consuming. For example, you [...]

  • Page 100

    Operation 84 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •A s pect Ratio - Pa s te S etting s : To apply the Output Shift, Image Alignment a nd Screen Masking se ttings on the clipboard to a different aspect ratio a nd/or screen, do either of the followin g: • Switch to an other asp ect ratio (for example, from 16:9 to Ci[...]

  • Page 101

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 85 PRE L IMINAR Y • S pla s h Enable: When you have fin ished custom izing the splash sc reen, select Splash Enable from th e Splash Con figure menu. Then, select O n and press ENTER . O S D Po s ition: To adjust the position of the OSD, select OSD Position from the Calibratio n menu an[...]

  • Page 102

    Operation 86 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Press MENU to exit test pattern mode. Grey Bar s Use this pattern when making brightness, contrast or white balance (gai n/offs et) adjustments. Full White Use this pattern when measuring or adjusting brightness, contrast or white balance (gain/offset). Primary Alignmen[...]

  • Page 103

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 87 PRE L IMINAR Y Input Name s : You can give each input a descriptive nam e. For examp le, you may wan t to change th e default input name to the type of source compo nent connec ted to it: “VCR,” “DVD,” “Laptop” et c etera. Input names can b e up to 12 characters lon g. To e[...]

  • Page 104

    Operation 88 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y When you change th e Remote Code on the Dimensio n Digital Controlle r, you must re-program th e Dimension Digi tal Controlle r remote cont rol to send that same co de. To enable “extended” key code mode, you must re-pro gram the Dimension Digital Controller rem ote[...]

  • Page 105

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 89 PRE L IMINAR Y To change a but ton assignment, select the co rresponding entr y in the SRC 1-7 Keys o r SRC 8-14 Keys sub-m enu. Then, c hoose the sour ce input you w ish to assign to that button. Di s play Device - Config ure: The options in the Display Device - Conf igure menu a llow[...]

  • Page 106

    Operation 90 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •D i s play 3D S etting s : The Display 3D Settings me nu is not applicab le to the SC-30d/SC-35d. • Internal 3D S etting s : Select Intern al 3D Settings from th e Display Device - Config ure menu to adju st the follow ing timing setting s for the Dim ension Digita[...]

  • Page 107

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 91 PRE L IMINAR Y • Default Gateway: Select Defau lt Gateway fr om the IP Conf iguration m enu to manually config ure the defau lt IP gateway. Th e procedure is similar to that for setting the IP address. • Communication T e s t: Select Communi cation Test from the IP Configuration me[...]

  • Page 108

    Operation 92 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • E-Mail Notification: Select E-Mail Notification from th e Network me nu to specify when and to whom the Dime nsion Digital Controller send s error and ser vice notification messages via e-mail. The notification m essages are in the following fo rmat: To: [E-Mail Add[...]

  • Page 109

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 93 PRE L IMINAR Y • Periodic S ervice Notification: You can have the Dimen sion Digital Controller send periodic rem inders via e-mail to perform re gular mainten ance tasks. To do this: 1. Select Periodic Service Notification from the E-Mail Notification m enu. 2. Highlight Enable and [...]

  • Page 110

    Operation 94 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • Remote Network Control: Select Remote Network Control from the N etwork menu to enable or d isable control o f the Dimension Digit al Controller via a n IP connectio n (typically usin g a web brows er). Set it to On to allow all incoming rem ote network connectivity[...]

  • Page 111

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 95 PRE L IMINAR Y Mi s cellaneou s : Select Miscellaneou s from the Service men u to set the following optio ns: • Langu age: Select Language fr om the Mi scellaneous men u and press the up- or down-arrows to select the OS D Language (English, Français, Deut sch, Italiano, Español, Sv[...]

  • Page 112

    Operation 96 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y HDMI: Select H DMI from the Service menu to set the follow ing options affecting communication between HDMI sources, the D imension Digital Con troller and the SC-30d/SC-35d. • HDMI EDID Exten s ion: Exten ded display iden tification data (EDID) is a data stru cture p[...]

  • Page 113

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 97 PRE L IMINAR Y • Logo LED: Select Logo LED fr om the Fron t Panel Bright ness menu to adjust the brightness of the larg e, illuminated logo on the left side of the display. The ra nge is from 0 (off) to 31. • S tandby LED: Select Standby LED fro m the Front Panel Br ightness menu t[...]

  • Page 114

    Operation 98 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 4.2 Using the 3D Glasses The 3D LCD Shutter Glasses f unction with the Ru nco Active3D Emitter and th e projector to provide unsurpassed 3D st ereosco pic viewing. T his section desc ribes the featu res, connection, setup and op eration of the 3D L CD Shutter G lasses. [...]

  • Page 115

    Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 99 PRE L IMINAR Y Charging the Batt ery The glasses must be fully ch arged before first use and whenever the Battery Stat us LED flashes red once every couple of seconds. The glasses will charge a completely dead battery in ap proximately five ho urs. You ma y use the glasses while the ba[...]

  • Page 116

    Operation 100 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Turning On the Glasses 1. Ensure that the projec tor is powere d on and displaying 3D content. 2. Press and hold the Po wer Button for ab out two second s, then release the b utton. The LED will then blink in a pattern that in dicates the batter y charge state. In gen [...]

  • Page 117

    Maintenance and Troubleshooting Runco SC-30d/SC-35d Insta llation/Operation Manual 101 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be repl aced when it reaches th e end of its lif e (typically bet ween 2,000 and 3,000 hour s depending on the L amp Power settin g), or sooner if a notice able degradation in brigh tness occurs. Keep track of t[...]

  • Page 118

    Maintenance and Troublesh ooting 102 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshooting pr oblems you may encounter with the SC-30d/S C-35d. If the su ggested solutions fail to resolve the problem or if you encounte r an issue not de scribed he[...]

  • Page 119

    Maintenance and Troubleshooting Runco SC-30d/SC-35d Insta llation/Operation Manual 103 PRE L IMINAR Y The display is jittery or unstable. • Poor-quality or improperly connected source. • The horizontal or vertical scan frequency of the input signal may be out of range for the projector. • Ensure that the source is properly connected and of ad[...]

  • Page 120

    Maintenance and Troublesh ooting 104 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y The projector does not turn on or respond to user com- mands. The vacuum fluores- cent display on the Dimension Digital Contro ller front panel displays the following mes- sage: Primary Display Error Communication Failure • The serial connectio[...]

  • Page 121

    Runco SC-30d/SC-35d Insta llation/Operation Manual 105 PRE L IMINAR Y In addition to using the Dimension Digital Controller fron t-panel keypa d or remote control unit, there are three metho ds of controllin g the SC-30d/SC-3 5d and Dimension Digital Controller exte rnally: • Using a serial ( RS-232) or TCP/IP (Etherne t) link to send ASCII comma[...]

  • Page 122

    External Control 106 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Command Format Commands sent from an aut omation/con trol system or PC to the Dimen sion Digital Controller must have t he following f ormat: (www:xyz) [CR] Where: • ( and ) indicate the star t and end o f the comma nd data. If th ese charac ters are present, [...]

  • Page 123

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 107 PRE L IMINAR Y • 11 = Password not entered • www indicates the comma nd code. This field is case in sensitive; for example, PWR , pwr and PwR are a ll equivalent. • :x is the destinatio n paramete r. This is an optional para meter that in dicates which memory the comm and[...]

  • Page 124

    External Control 108 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Apply Image Alignment Values AIA R/W No 0 1 No 0 = Off; 1 = On Altitude ALT R/W No 0 1 No 0 = Auto 1 = High Advanced Color Temp Mode Enable AME R/W No 0 1 No 0 = Off; 1 = On Auto New Firmware Check ANF R/W No 0 1 N o 0 = Off; 1 = On Auto Power Off Enable APE R/W[...]

  • Page 125

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 109 PRE L IMINAR Y ConstantCo ntrast (SC-30d only) CCT R/W No 0 4 No 0 = Off 1 = On 2 = Low 3 = Medium 4 = High CEC Enable CEC R/W No 0 1 No 0 = Off; 1 = On C h r o m a D e l a y C H R R / W Y e s 07N o C o l o r G a m u t C L G R / W Y e s 06N o 0 = A u t o 1 = REC709 2 = SMPTE C [...]

  • Page 126

    External Control 110 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Diagnostic Color DGC R/W No 0 6 No 0 = White 1 = Red 2 = Green 3 = Blue 4 = Yellow 5 = Cyan 6 = Magenta Display Green Gain DGG R/W Yes -100 100 No Display Green Offset DGO R/W Yes -100 100 No DHCP DHC R/W No 0 1 No 0 = Off; 1 = On Display Red Gain DRG R/W Yes -1[...]

  • Page 127

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 111 PRE L IMINAR Y 24Hz 3D Mode FRC R/W No 1 2 No 1 = 120Hz 6:4 2 = 120Hz 5:5 Firmware Upgrade FWU W No N/A N/A No Action will be performed on any setting value Gamma Advanced GMA R/W Yes 0 20 No Gamma Mode GMM R/W No 0 1 No 0 = Simple 1 = Advanced Gamma Simple GMS R/W No 0 4 No 0 [...]

  • Page 128

    External Control 112 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Information Current Color Space ICC R No 0 3 Yes 0 = REC601 1 = REC709 2 = RGB 3 = RGB Video Information Copied Input Source ICI R No N/A N/A Yes Information Copied Memory Pre- set ICM R No N/A N/A Yes Information Copied Screen ICR R No N/A N/A Yes Information [...]

  • Page 129

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 113 PRE L IMINAR Y Input Position Left Right IPL R/W Yes -50 50 No Input Position Up Down IP U R/W Yes -50 50 No Input Position Width IPW R/W Yes 0 50 No Input Red Gain IRG R/W Yes -32 32 No Input Red Offset IRO R/W Yes -32 32 No Internal 3D Sync Delay ISD R/W Yes Var. Var. No Info[...]

  • Page 130

    External Control 114 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Remote Key KEY W No 0 85 No 1 = On 2 = Off 3 = Menu 4 = Enter 5 = Up 6 = Down 7 = Left 8 = Right 9 = 16:9 10 = 4:3 11 = Letter box 12 = VirtualWide 13 = Video 1 14 = Compon ent 17 = HD 1 18 = HD 2 19 = HDMI 1 20 = HDMI 2 21 = HDMI 3 22 = HDMI 4 23 = SCART 24 = [...]

  • Page 131

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 115 PRE L IMINAR Y Remote Key Repeat (cont.) KRT W No 0 85 No 64 = Keypad Menu (used internally) 65 = Power Toggle (used internally) 66 = Enter Key Up (used in ternally) 67 = SRC 1 68 = SRC 2 69 = SRC 3 70 = SRC 4 71 = SRC 5 72 = SRC 6 73 = SRC 7 74 = SRC 8 75 = SRC 9 76 = SRC 1 0 [...]

  • Page 132

    External Control 116 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Display Serial Number LSN R No N/A N/A Yes Model Name MDL R No N/A N/A Yes Memory Preset MMP R/W No 0 3 No 0 = ISF Night 1 = ISF Day 2 = Custom 1 3 = Custom 2 Memory Preset Copy MPC W No N/A N/A No Action will be performed on any setting value Memory Preset Pas[...]

  • Page 133

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 117 PRE L IMINAR Y Programmable Source Key [1 ... 14] P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 R/W No 0 15 No 0 = Com posite 1 1 = Composite 2 2 = Composite 3 3 = Component 4 = HD 1 5 = HD 2 6 = SCART 7 = HDMI 1 8 = HDMI 2 9 = HDMI 3 10 = HDMI 4 11 = HDMI 5 12 = HDMI[...]

  • Page 134

    External Control 118 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Input Name 1 Restore R01 W No N/A N/A No Action will be performed on any setting value Input Name 2 Restore R02 W No N/A N/A No Input Name 3 Restore R03 W No N/A N/A No Input Name 4 Restore R04 W No N/A N/A No Input Name 5 Restore R05 W No N/A N/A No Input Name[...]

  • Page 135

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 119 PRE L IMINAR Y Screen Masking Left SML R/W Yes 0 200 N o Screen Masking Test Pattern Mode Enable SMM R/W No 0 1 No 0 = Off; 1 = On Screen Masking Right SMR R/W Yes 0 200 No Screen Masking Top SMT R/W Yes 0 2 00 No Splash Enable SPE R/W No 0 1 No 0 = Off; 1 = On Splash Timer SPT[...]

  • Page 136

    External Control 120 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Trigger 1 16:9 T11 R/W No 0 1 No 0 = Off; 1 = On Trigger 1 4: 3 T12 R/W No 0 1 No Trigger 1 Letterbox T13 R/W No 0 1 No Trigger 1 VirtualWide T14 R/W N o 0 1 No Trigger 1 Cinema T1 5 R/W No 0 1 No Trigger 1 Virtual Cinema T16 R/W No 0 1 No Trigger 1 Native T17 [...]

  • Page 137

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 121 PRE L IMINAR Y Test Pattern Enable TPE R/W No 0 1 No 0 = Off; 1 = On Primary Test Pattern TPP R/W No 0 1 N o 0 = Off; 1 = On Secondary Test Pattern TP S R/W No 0 1 No 0 = Off; 1 = On Tracking TRK R/W Yes -100 100 No Image Alignment Top Right x TRX R/W Yes -100 100 No Image Alig[...]

  • Page 138

    External Control 122 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y 6.2 Using Discrete IR Codes The Dimension Digital Contr oller accepts comm ands in the form of IR signals that con form to the NEC protocol . Each Dimension Digi tal Controller remo te control b utton has an NEC control code a ssociated with it . You can use th[...]

  • Page 139

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 123 PRE L IMINAR Y IR Command List (Standa rd Mode) Table 6-2 lists th e NEC contro l codes for th e Dimension Digi tal Controller. Table 6-2. NEC Control Code s for the Dimen s ion Digital Controller ( S tandard Mode) Remote Control Button Name Addre ss Data NEC Data From Remote ([...]

  • Page 140

    External Control 124 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Right 8209 29 0x20111DE2 Right-Arrow ( ) Down 8209 30 0x20111EE1 Down-Arrow ( ) Left 82 09 31 0x2 0111FE0 Left-Arrow ( ) ENTER 8209 32 0x201120DF ENTER SRC 1 8209 33 0x201121DE V ideo Source 1 SRC 2 8209 34 0x201122DD Video Sour ce 2 SRC 3 8209 35 0x201123DC Vi[...]

  • Page 141

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 125 PRE L IMINAR Y COMP 8209 72 0x20114 8B7 Component video input HD 1 820 9 73 0x20114 9B6 HD1 video input HD 2 820 9 74 0x20114 AB5 HD2 video input HDMI 1 8209 75 0x20114BB4 HDMI1 video input HDMI 2 8209 76 0x20114CB3 HDMI2 video input HDMI 3 8209 77 0x20114DB2 HDMI3 video input [...]

  • Page 142

    External Control 126 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y IR Command List (Extended Mode) Table 6-3 lists the Extended-mode NEC co ntrol codes for the Dimension Digital Controller. To use the remote co ntrol unit in extended mode, s et the addre ss code to 88999 (refer to Remote Control on page 87). ➤ Table 6-3. NEC[...]

  • Page 143

    External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 127 PRE L IMINAR Y 6.3 Using HDMI CEC Messages The Dimension Digita l Controller accep ts and can respond to CEC command messages from a disc player, satellite receiver or DVR/set- top box via an HDMI connection. Using CEC, the Dimension Digital Controlle r can perform the followin[...]

  • Page 144

    External Control 128 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Set Menu Language 0x3 2 – √ Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version 0x9F – √ Abort Message 0xFF – √ User Control Pressed 0x44 – √ User Control Released 0x45 – √ Give OSD Name 0x46 – √ Menu Request [...]

  • Page 145

    Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 129 PRE L IMINAR Y 7.1 SC-30d/SC-35d Projector Specifications Table 7-1 lists the SC-30d/SC- 35d proje ctor spec ifications. 7. S pecification s Table 7-1. S C-30d/ S C-35d Projector S pecification s Projector Type: 3-chip Texas Instru ments Digital Light Processing™ (DLP), SuperOn[...]

  • Page 146

    Specifications 130 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY Brightne ss and Contra s t (2D): Cinema S tandard s Mea s urement S y s tem (C S M S ) S pecification s - S C-30d - Brigh tness: 49 foot-Lamberts (fL) - Contrast Ratio: >350:1 C S M S S pecification s - S C-35d - Brigh tness: 87 foot-Lamberts (fL) - Contrast R[...]

  • Page 147

    Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 131 PRE L IMINAR Y Refre s h Rate: 50 Hz or 60 Hz (2D content) 100 Hz or 120 Hz (3D content) 3D Technology: Frame sequential, active shutter Dimen s ion s : See Figure 7-1 Weight (without len s ): 61.5 lbs. (27.9 kg) Limited Warranty: Projector: (2) Two years parts and labor from the[...]

  • Page 148

    Specifications 132 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.2 Dimension Digital Controller Specifications Table 7-2 lists the Dimension Digit al Controller sp ecifications. Table 7-2. Dimen s ion Digital Controller S pecification s A s pect Ratio s : 4:3, Letterbox, 16:9, VirtualW ide, Cinema, Virtual C inema, Native, A[...]

  • Page 149

    Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 133 PRE L IMINAR Y Dimen s ion s : Width = 17.50 inches (444.5 mm) Depth = 17.68 inches (449.0 mm) Height = 3.75 inches (95.3 mm) Weight: 17.6 lbs. (8.00 kg) Regulatory Approval s : cTUVus, FCC class B, CE, RoHS, China RoHS, WEE E, C-Tick, CCC, local conforma nces as required Limited[...]

  • Page 150

    Specifications 134 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.3 Supported Timings Table 7-3 lists the s ignal types su pported by each input on the Dimension Digita l Controller . Table 7-3. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) S upp[...]

  • Page 151

    Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 135 PRE L IMINAR Y S upported 3D Mod e s (continued) 1080p TAB (Top-and- Bottom) 1920x1080 23.98 26.978 74.175 – √ – – – – 24.00 27.000 74.250 – √ – – – – 29.97 33.716 74.175 – √ – – – – 30.00 33.750 74.250 – √ – – – – 50.00 56.250 148.[...]

  • Page 152

    Specifications 136 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY S upported 2D Mod e s (continued) 1152x864 1152x864 75.00 67.50 0 108.000 √√√√ – – 1280x720 1280x720 47.95 37.83 3 64.769 √√√√ – – 1280x768 1280x768 60.00 47.396 68.250 √√√√ – – 60.00 47.776 79.500 √√√√ – – 75.00 60[...]

  • Page 153

    Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 137 PRE L IMINAR Y S upported 2D Mod e s (continued) SCART RGBS – 50.00 – – –––– √ – 480/60i 720x487 59.94 15.734 13.500 √√√√ – – 480/60p 720x483 59.94 31.46 9 27.000 √√√√ – – 576/50i 720x576 50.00 15.625 14.750 √√√√ – – 576/50p 7[...]

  • Page 154

    Specifications 138 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.4 SC-30d/SC-35d Dimensions Figure 7-1 shows the SC-30d/SC- 35d dimensions, in inch es. Figure 7-1. S C-30d/ S C-35d Dimen s ion s 0 X 2 2 7 8 . 9 0 0 0 . 1 2 0 4.299 8.250 9.000 5 9 3 . 5 1 7 2 6 . 8 1 2 2 1 . 6 2 2 6 . 3 1 .000 4.016 5.881 4X .902 .673 .350 0 [...]

  • Page 155

    [...]

  • Page 156

    Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1205-00 Rev. A September 20 12[...]