English dropdown-ico

Russound SIX-SOURCE CONTROLLER CAM6.6 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Russound SIX-SOURCE CONTROLLER CAM6.6, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Russound SIX-SOURCE CONTROLLER CAM6.6 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Russound SIX-SOURCE CONTROLLER CAM6.6. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Russound SIX-SOURCE CONTROLLER CAM6.6 should contain:
- informations concerning technical data of Russound SIX-SOURCE CONTROLLER CAM6.6
- name of the manufacturer and a year of construction of the Russound SIX-SOURCE CONTROLLER CAM6.6 item
- rules of operation, control and maintenance of the Russound SIX-SOURCE CONTROLLER CAM6.6 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Russound SIX-SOURCE CONTROLLER CAM6.6 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Russound SIX-SOURCE CONTROLLER CAM6.6, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Russound service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Russound SIX-SOURCE CONTROLLER CAM6.6.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Russound SIX-SOURCE CONTROLLER CAM6.6 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    CAM6.6 Six-Zone, Six-Source Controller CAM6.6T Six-Zone, Six-Source AM/FM Receiver INSTRUCTION MANUAL[...]

  • Page 2

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a[...]

  • Page 3

    T ABLE OF CONTENTS 3 USER SECTION Pr oduct Introduction ............................................................................................................................5 Component Guide CAM6.6 Controller ..............................................................................................................................6 UNO-S1[...]

  • Page 4

    T ABLE OF CONTENTS Speaker Connections ........................................................................................................................36 Zone Fixed/Variable Audio Output ......................................................................................................37 12VDC Home Theater T rigger In/Out ...............[...]

  • Page 5

    5 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6 multisource, multizone contr oller to enhance your home with distributed audio. This controller’ s state-of-the-ar t features and components blend seam- lessly with your unique lifestyle and prefer ences. Besides distributing and controlling six audio sour ces to six r ooms (zon[...]

  • Page 6

    6 USER COMPONENT GUIDE CAM6.6 Contr oller-Fr ont Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICA TORS - Indicates when a room is on (gr een) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position. Any active room (1-6) is indicated on the fr ont of the [...]

  • Page 7

    7 USER COMPONENT GUIDE UNO-S1 Keypad LCD P ANEL - 5-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for th[...]

  • Page 8

    8 CD PLAYER 1 LCD P ANEL - 12-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room IR RECEIVER - R[...]

  • Page 9

    9 USER COMPONENT GUIDE UNO-TS2 T ouchscreen IR RECEIVER - Receives IR signals and passes them to the contr oller and source equip- ment. Also used when operating the touchscreen by using the SRC2 r emote TOUCHSCREEN - Full color resistive touchscr een with multi-sound feedback. Scr een can be programmed to go blank after a period of inactivity . T [...]

  • Page 10

    10 USER COMPONENT GUIDE SRC2 Remote Contr ol 1 4 4 7 7 2 5 8 3 3 6 9 11 10 6 9 1 2 5 8 10 11 POWER - T urns r oom or Local Source on and off. RUSSOUND DEVICE BUTTON - Used for SRC2 control of zone keypad. NUMBER BUTTONS - Buttons (0-9) for direct selection of channels or discs. VOLUME UP/DOWN - Raises and lowers the volume for the room you ar e in,[...]

  • Page 11

    11 Room On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. This will also put the corresponding CAM6.6’[...]

  • Page 12

    12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. T o enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes while using the User Menu: Press and hold to adjust featur[...]

  • Page 13

    13 USER OPERA TION UNO-S2 Keypad Button Function Room On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. [...]

  • Page 14

    The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: T o enter the User Menu, press and hold during normal operation. T o exit the User Menu, press and r elease . Adjust feature setting (incr ement). Adjust feat[...]

  • Page 15

    USER OPERA TION UNO-TS2 T ouchscreen Button Function Room On/Off T o turn on the room and the touchscr een, touch the UNO-TS2 screen anywher e, or pr ess and release the power button. Any pr esets pr eviously assigned will be activated, including settings for bass, volume, last source selected, etc. P r e ss and release the power button to turn off[...]

  • Page 16

    The Options button on the home screen brings up room setting options and scr een adjustments. (For more detailed information, consult the UNO-TS2 Instruction Manual) Features T urn On V olume - This sets the room’ s default vol- ume when the room is turned on. Party Mode - When in “P ARTY MODE” the system is primarily controlled by a “MASTE[...]

  • Page 17

    17 USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Contr ol UNO-S1 Keypad Contr ol of T uner Selecting the tuner On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired fr equency Press and hold or to activate manual tuning. Once active, press or to scroll through fr e[...]

  • Page 18

    18 USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Contr ol UNO-S2 Keypad Contr ol of T uner Selecting the tuner On the UNO-S2 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired band Push to toggle between AM band and FM band reception. Selecting the desired fr equency Use and [...]

  • Page 19

    19 92.5 MHz FM TUNER SELECTION - Select source number assigned to AM/FM TUNER (1) TUNE UP/DOWN - Used for manual station selection SELECT - Selects AM or FM band SEEK - (press) Seeks next higher tuned station SCAN - (press and hold) Scans thr ough tuned sta- tions with 5-second preview befor e next station MUTE - Mutes/unmutes tuner audio output BA[...]

  • Page 20

    20 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 T ouchscreen Contr ol UNO-TS2 Contr ol of T uner Selecting the tuner On the UNO-TS2 touchscreen home page, pr ess the named source button to select the AM/FM tuner . Selecting a Bank From the “1 of 3” tuner scr een, select the bank by scrolling using the forwar d/back arr ow next to the bank name. T[...]

  • Page 21

    21 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 T ouchscreen Contr ol 1 of 3 T uner 1 Dad’ s Music WBZ 1030 102.5 Class WEEI 850 107.1 MHz FM 89.7 NHPR 105.7 Oldies Banks and Memory Presets Example of Bank and Preset scr een for Russound T uner 107.1 MHz FM AM/FM T uner Advanced Features 3 of 3 Example of AM/FM tuner screen 2 of 3 T uner 1 Example [...]

  • Page 22

    USER INTERNAL SOURCE - AM/FM TUNER SRC2 Remote Contr ol SRC2 Contr ol of T uner Selecting the tuner T o select the tuner , push to toggle through sources and choose the sour ce number preassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the SRC2. Selecting the desired band Push to toggle between AM/FM r eception[...]

  • Page 23

    23 USER INTERNAL SOURCE - AM/FM TUNER SRC2 Remote Contr ol POWER - Power managed by CAM6.6 NUMERIC INPUT - (press) Number buttons for direct input of fr equency MEMORY PRESETS - (pr ess and hold) Number buttons (1-6) for saving memory presets TUNE UP/DOWN - Incrementally scr olls through channels or tuned stations OK - Confirms numeric selection PL[...]

  • Page 24

    INST ALLER SECTION Getting Star ted Includes an installation overview , including tools needed and connection tips. Component Guides Reviews front and back panel featur es of the CAM6.6 contr oller and the UNO keypads. Keypad Installation Explains UNO keypad installation and wiring. Making Connections Details front and back panel connections of the[...]

  • Page 25

    25 INST ALLER GETTING ST ARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before pr oceeding to install the unit. • Retain the sales receipt as it establishes the [...]

  • Page 26

    26 17 16 14 12 13 15 19 18 20 CAM6.6 RNET LINK IN AND LINK OUT - Links multiple CAM6.6’ s, also links future Russound components that are RNET compatible RS-232 INTERF ACE - The RS-232 Inter face allows the zones to be controlled by PC or other devices that have an RS-232 Interface. The RS-232 Inter face also allows for firmware updates and pr og[...]

  • Page 27

    27 OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/FM radio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and 240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cor d connection for the CAM6.6 FUSE HOLDER - Holds a replaceable fuse for A/C input connection 110VAC operation - F 3[...]

  • Page 28

    28 INST ALLER COMPONENT GUIDE UNO Keypad Update Port 2 OS UPDA TE PORT- Connection for programming cable used to update UNO keypad OS software. SETUP BUTTON - Activates Installer Setup mode and accesses update menus RESET BUTTON - Resets UNO-TS2 after update OS UPDA TE/RUN JUMPER - Pins are jumpered during OS update, and removed during normal opera[...]

  • Page 29

    UNO-S2 UNO-S1 KORE A EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver OS UPDA TE JUMPER - Selects mode “Run” (one pin covered) or “OS Update” (two pins cover ed). Jumper setting must be in “Run” position for keypad operation. RESET BUTTON - (UNO-S2) Reset whenever changing from RUN to OS update (UNO-TS2) Reset [...]

  • Page 30

    30 Wire Length T o determine the amount of CA T-5 wir e r equired for the system installation, first decide how many keypads will be used, then determine the distance between each intended keypad location to the intended CAM6.6 location. The maximum recommended wir e run length is 250 feet for each UNO keypad. • Make sure that the entir e wir e p[...]

  • Page 31

    The UNO-S2 keypad has an External IR Receiver IN terminal for connecting an external IR receiv- er such as the Russound SaphIR 858, 862 Eye, or 860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG- NAL) and the other pair connecting ST (ST A TUS) and V+ (+12VDC). If the wire has a shield, con- nect it to ground at [...]

  • Page 32

    32 INST ALLER UNO KEYP AD INST ALLA TION Keypad Location The best infrared r emote performance is achieved with the keypad away from any dir ect sunlight, plasma TV , and low voltage lighting controls. Also consider convenience when choosing a location. Choose a place that is easily seen from the posi- tion where a person is most likely to be locat[...]

  • Page 33

    33 CAM6.6 CA T-5 Cable CA T-5 Cable PM Mod 3D with RJ-45 CA T-5 Cable SA-ZX3 1201A/1A Pow er Supply CAM6.6T The UNO System Keypad Ports are located on the back of the CAM6.6 in the top left of center . Connections made at the UNO Keypad Ports are made using CA T-5 T568A RJ-45 wir e configura- tion. CA T-5 is color-coded for ease of installa- tion. [...]

  • Page 34

    Source Audio Connections The CAM6.6 supports up to six audio sources. The Source Inputs ar e located at the back panel. For the CAM6.6 (no internal source installed), the switch next to Source 1 input must be set to “Input.” Connect each source output using quality RCA signal cables. Connect the Left and Right Audio outputs from each sour ce to[...]

  • Page 35

    INST ALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6 allows control of any sour ce equipment without that source being selected on the keypad. The connection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound 845.1 single IR emitter is recommended, or [...]

  • Page 36

    36 The speakers are connected to the CAM6.6 using modular snap connectors. Each of these color-coded connectors is designated for the speaker set of a particular amplified zone. T o avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight. Note: An 8 Ohm minimum spea[...]

  • Page 37

    37 The CAM6.6 has two Zone Audio outputs, on Zone 1 and Zone 2. Each of these zone audio output connections features a ster eo line out RCA connection plus a switch to allow for either a fixed or a variable line level output. When set to V ariable, the keypad volume level affects this output. In the Fixed position, the key- pad volume level will no[...]

  • Page 38

    38 CAM6.6 12VDC Home Theater T rigger In This 12VDC T rigger input is used to control Power Management of the audio sources possibly being shared with a home theater system. When the last zone on the CAM6.6 is turned off, 12VDC presence to the trigger input will pr event the sources that ar e on fr om being turned of f. The connections for the trig[...]

  • Page 39

    39 12VDC Mute T rigger In When 12VDC is applied to the Mute T rigger In, the system will fully mute any source that is con- nected to the Source Audio Input. The connec- tions for the trigger are made using a two-con- ductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is negative (-). This allows for the connection of[...]

  • Page 40

    40 The RNET Link In and Link Out can be used to connect two to six CAM6.6 or CAV6.6 con- trollers. The connection is made using a CA T -5 patch cable from the Link Out of the master CAM6.6 and into the Link In of the next con- troller . Along with RNET data signals, the RNET Link In and Link Out jack passes the six source IR signals. These are only[...]

  • Page 41

    41 The CAM6.6 supports RS-232 communication with various third party automation systems or PC for programming of the contr oller . The RS-232 com port is located on the back of the CAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC applica- tion, go to www .russound.com, Document Center . Under RNET Systems, look under t[...]

  • Page 42

    42 INST ALLER MAKING CONNECTIONS Optional Internal Source - AM/FM T uner Antennas AM Antenna Connect the included loop antenna for AM recep- tion to the Optional Internal Source panel, attach- ing the GND (ground) and AM ends to the appr o- priately marked connections. FM Antenna Attach the included FM antenna for FM reception to the Optional Inter[...]

  • Page 43

    43 Connecting an Alternate Outdoor Antenna for AM/FM The diagram below depicts a suggested installa- tion option of an alternate outdoor FM antenna and AM antenna. For best performance for AM reception, it is r ec- ommended to use an external outdoor or attic- mounted long wire antenna for best performance for AM reception. Use a 75-ohm to 300-ohm [...]

  • Page 44

    44 Gr ounding an Outdoor Antenna If the tuner is used with an outdoor antenna, the antenna must be grounded against static char ges and voltage sur ges. Consult the instruc- tions that came with the antenna or contact the antenna manufacturer for pr oper installation instructions. The diagram above gives a general depiction of how an outdoor antenn[...]

  • Page 45

    45 Before pr oceeding to the system pr ogramming section, it’s important to conduct an initial test to determine that the hardwar e components ar e working properly . 1. Connect the speaker wires fr om Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO keypad to Keypad Port #3 on the rear of the CAM6.6. 3. Connect a source[...]

  • Page 46

    46 This manual includes items that are designed to assist in the pr ogramming pr ocess. Forms (Pages 106-108) Three blank r epr oducible forms are included as planning tools when determining sour ces, settings and zone prefer ences. The Sour ce and Zone Information forms and the Macro Editor form should be completed before pr ogramming and r eferre[...]

  • Page 47

    3. Basic Setup (SOURCE SETUP) (Pages 51-53) This procedur e is mandatory to set up each sour ce for keypad source contr ol and is the cornerstone of the programming pr ocess. 4. Peripheral Setup (Pages 49-51) (FOR OPTIONAL INTERNAL SOURCE) This procedur e pr ovides setup and naming procedur es for the tuner . It includes assigning a custom name to [...]

  • Page 48

    48 There ar e thr ee item types in the installation menu: Menu – “ Folder” that holds procedur es and/or featur e options. Pr ocedure – A series of steps to perform a guided operation, such as configuring a button. Feature – The actual settings that will change the system configuration. The following UNO-S1 and UNO-S2 buttons are used to [...]

  • Page 49

    49 The following items make up the Installation Menu: PERIPH SETUP (Per Su) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Note: For CAM6.6, Peripheral Setup is not applicable. “ N N o o t t A A v v a a i i l l ” shows on the keypad. Pe[...]

  • Page 50

    INST ALLER INST ALLA TION MENU 2. BANK NAME – Use the volume up/down keys to select a character and left/right (BnkNm) keys to change a character position. A blinking cursor indicates placement of the character being entered. Names can be fr om 1 to 5 characters in length. If adding names from 6-12 characters, it is suggested you use an optional [...]

  • Page 51

    51 INST ALLER INST ALLA TION MENU SYSTEM INFO (SInfo) System Info shows the tuner’ s manufacturing build properties. See Periph Setup - Flow Chart on page 65 BUILD TIME (BTime) BUILD DA TE (BDate) VERSION (V er) 1. BUILD TIME Displays the firmware Build Time of the tuner . (BTime) 2. BUILD DA TE Displays the firmware Build Date of the tuner . (BD[...]

  • Page 52

    52 INST ALLER INST ALLA TION MENU 2. SOURCE NAME – Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.). (Name) 3. COMMAND TYPE – Select the type of command template (e.g., CD, TV , etc.). Selecting (CmdTp) the command type template will tell the CAM 6.6 how to configure the key’ s command and text for the source component. a. Select[...]

  • Page 53

    53 INST ALLER INST ALLA TION MENU 9. AUTO PLA Y? – “Y es” tells the CAM6.6 to issue a PLA Y command whenever the (AtoPl) source is selected for listening. This option is skipped if the source type (COMMAND TYPE) chosen does not have a PLA Y command associated with it. 10. SAVE CHANGES? – Select “yes” to save changes. Procedur e r eturns[...]

  • Page 54

    INST ALLER INST ALLA TION MENU i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated. ii. MACRO ID – Enter the macro ID number . Menu advances to SAVE CHANGES (MacID) (step 9) e. All Other Selections: Procedur e advances to DEVICE CODE (step 7) 7. DEVICE CODE – Enter source component code number listed in this[...]

  • Page 55

    55 INST ALLER INST ALLA TION MENU 1. SOURCE NUM – Select the source number this function will be configur ed for . (Src #) 2. USE NUM IR? – T ells the system whether the source component has numeric (NumIR) scrolling, such as 100-disc CD player . A selection of “no” disables Numeric IR and advances to SAVE CHANGES 3. HIGHEST NUM – Enter t[...]

  • Page 56

    INST ALLER INST ALLA TION MENU 9. SUFFIX CMD – T ells the system whether a command will be issued after the (Sufix) selection of the numerical value (e.g., 1, 2 Enter ). If “no,” proce- dure advances to SA VE CHANGES (step 13) 10. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Selected: Learned IR Choose [...]

  • Page 57

    57 INST ALLER INST ALLA TION MENU 2. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Selected: Learned IR Choose Learned IR if the pre-pr ogrammed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned to the sour ce (LnSrc) component. Proc[...]

  • Page 58

    58 INST ALLER INST ALLA TION MENU ZONE SETUP (ZonSu) NOTE: This procedur e should be performed using the keypad installed in the zone to be configured. See Zone Setup - Flow Chart on page 71 Zone Setup allows the installer to adjust properties of the UNO Keypad contr olled CAM6.6 zone. This series of menus allows the system’ s zones to be configu[...]

  • Page 59

    59 INST ALLER INST ALLA TION MENU 2. F ACTORY INIT WARNING: This pr ocedure r eturns the controller to its (FInit) original settings - use with discretion. Factory Initialization allows the installer to erase all programmed settings and returns the settings to the factory default settings. All settings including source equipment IR commands will ne[...]

  • Page 60

    c. Selected: Default Default selects the same device type and device code previously (Deflt) setup in BASIC SETUP . Procedur e advances to KEY FUNCTION (step 5) d. Selected: Macr o: (T o build macros, see Macr o Editor page 62) (Macro) i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated. ii. MACRO ID – Enter t[...]

  • Page 61

    61 e. All Other Selections: Procedur e advances to DEVICE CODE (step 8) 8. DEVICE CODE – Source component code for IR contr ol. (DevCd) 9. KEY FUNCTION (f) – Select Keypad function. (KeyFn) 10. SAVE CHANGES? (f) – Select “yes” to save the changes. (Save?) LEARN IR (LrnIR) This procedur e allows IR commands to be learned into the system an[...]

  • Page 62

    62 MACRO EDITOR (MacEd) This procedur e is used to cr eate a sequence of commands that are launched with one key touch or other event. Up to 132 macros can be cr eated for the system, and each macr o can contain up to 10 commands including other macros and delays. See Macr o Editor - Flow Char t on page 75 1. MACRO ID – Number of Macro up to 132 [...]

  • Page 63

    63 5. DEVICE CODE – Source component code for IR contr ol. (DevCd) 6. KEY FUNCTION – Select a function (Play , etc.). (KeyFn) SYSTEM INFO (SInfo) System Info allows the installer to view the controller’ s manufacturing build properties. See System Info - Flow Chart on page 76 #CONTROLLERS (#Ctls) BUILD TIME (BTime) BUILD DA TE (BDate) VERSION[...]

  • Page 64

    64 INST ALLER SETUP MENU FLOW CHARTS[...]

  • Page 65

    INST ALLER SETUP MENU FLOW CHARTS 65[...]

  • Page 66

    INST ALLER SETUP MENU FLOW CHARTS 66[...]

  • Page 67

    INST ALLER SETUP MENU FLOW CHARTS 67[...]

  • Page 68

    INST ALLER SETUP MENU FLOW CHARTS 68[...]

  • Page 69

    INST ALLER SETUP MENU FLOW CHARTS 69[...]

  • Page 70

    INST ALLER SETUP MENU FLOW CHARTS 70[...]

  • Page 71

    INST ALLER SETUP MENU FLOW CHARTS 71[...]

  • Page 72

    INST ALLER SETUP MENU FLOW CHARTS 72[...]

  • Page 73

    INST ALLER SETUP MENU FLOW CHARTS 73[...]

  • Page 74

    74 INST ALLER SETUP MENU FLOW CHARTS[...]

  • Page 75

    75 INST ALLER SETUP MENU FLOW CHARTS[...]

  • Page 76

    76 INST ALLER SETUP MENU FLOW CHARTS[...]

  • Page 77

    77 INST ALLER KEYP AD DIAGNOSTIC MENU UNO Keypad Diagnostics Menu The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware pr ocedur e for updating the UNO-S1 and UNO-S2’ s firmware. T o access the Diagnostics Menu, press and hold t[...]

  • Page 78

    78 INST ALLER IR DEVICE CODES Device Codes for TVs: Admiral 0093, 0463 Advent 0761, 0842 Aiko 0092 Akai 0030, 0672, 0702, 0812 Albatron 0700, 0843 America Action 0180 Anam 0180 AOC 0030 Apex Digital 0748, 0765, 0767, 0879, 1943 Audiovox 0451, 0180, 0092, 0623 Bell & Howell 0154 BenQ 1032 Bradford 0180 Broksonic 0236, 0463, 1935, 1911 Candle 003[...]

  • Page 79

    79 Device Codes for Cable: (cont’d) Starcom 0003 Supercable 0276 Supermax 0883 T orx 0003 T oshiba 0000 T ristar 0883 V2 0883 Viewmaster 0883 Vision 0883 Vortex View 0883 Zenith 0000, 0525, 0899 Device Codes for Video Acc: ABS 1272 Alienware 1272 CyberPower 1272 D-Link 1554 Escient 1151, 1371, 1370, 1373, 1372 Gateway 1272 Hewlett Packard 1272, 1[...]

  • Page 80

    80 INST ALLER IR DEVICE CODES Device Codes for VCRs: (cont’d) Pulsar 0039 Quasar 0035, 0162 Radio Shack 0000 Radix 0037 Randex 0037 RCA 0060, 0240, 0042, 0149, 0880 Realistic 0035, 0037, 0048, 0047, 0000, 0104 ReplayTV 0616 Runco 0039 Samsung 0045, 0240 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 0041, 0479 Sanyo 0047, 0240, 0104 Scott 0184, 0045, [...]

  • Page 81

    81 Device Codes for Amp and Misc. Audio: Aiwa 0159 Altec Lansing 1485 Cambridge Sound. 1530 Creative 0872 Durabrand 1561 GE 0078 Harman/Kardon 0892 JVC 0331 Left Coast 0892 Lenoxx 1561 Marantz 0892, 1491 Motorola 1464 Omnifi 1605 Optimus 0395 Philips 0892 Polk Audio 0892 Realistic 0395 Russound 1302 Sony 0159 Soundesign 0078 Victor 0331 War ds 0078[...]

  • Page 82

    82 INST ALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Po w e r Po w e r P ower On/Off[...]

  • Page 83

    83 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Lear ned Only Halt Halt Learned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned Only [...]

  • Page 84

    84 INST ALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Po w e r Po w e r P ower On/Off Enter E[...]

  • Page 85

    85 KEY FUNCTION UNO-S1 CABLE PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 A,VID1,Video,TVp1 Input 2 In 2 B,VID2,TVp2 Input 3 In 3 C,VID3,TVp3 Input 4 In 4 VID4,TVp4 Input 5 In 5 VID5,A V1,VCR,BNC Input 6 In 6 VID6,A V2,VDP ,D VD ,D VI Input 7 In 7 TV , Component Input 8 In 8 CAB,SA T ,S-Video Input 9 In 9 A V , T uner [...]

  • Page 86

    86 INST ALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO A CC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Po w e r Po w e r P ower On/Of[...]

  • Page 87

    87 KEY FUNCTION UNO-S1 VIDEO ACC Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Lear ned Only Dim Dim Learned Only Close Close Lear ned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Lear ned Only Di[...]

  • Page 88

    88 INST ALLER KEY CODES SA T/DSS KEY FUNCTION UNO-S1 SA T/DSS 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Po w e r Po w e r P ower On/Off E[...]

  • Page 89

    89 KEY FUNCTION UNO-S1 SA T/DSS PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 VID1,Video ,TVp1 Input 2 In 2 VID2,TVp2 Input 3 In 3 VID3,TVp3 Input 4 In 4 VID4,TVp4 Input 5 In 5 VID5,A V1,VCR,BNC Input 6 In 6 VID6,A V2,VDP ,D VD ,D VI Input 7 In 7 TV , Component Input 8 In 8 CAB,SA T ,S-Video Input 9 In 9 A V , T uner In[...]

  • Page 90

    90 INST ALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Do wn Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Po w e r Po w e r P ower On/Off Enter Ent[...]

  • Page 91

    91 KEY FUNCTION UNO-S1 VCR Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Lear ned Only Halt Halt Learned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned Only Disk U[...]

  • Page 92

    92 INST ALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Lear ned Only Channel Dn Ch Dn Lear ned Only P ower P ower P ower On[...]

  • Page 93

    93 KEY FUNCTION UNO-S1 LASER DISC Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Lear ned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Lear ned Only Halt Halt Lear ned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned Onl[...]

  • Page 94

    94 INST ALLER KEY CODES DVD KEY FUNCTION UNO-S1 DV D 1 1 Digit 1, T raack 1 2 2 Digit 2, T rack 2 3 3 Digit 3, T rack 3 4 4 Digit 4, T rack 4 5 5 Digit 5, T rack 5 6 6 Digit 6, T rack 6 7 7 Digit 7, T rack 7 8 8 Digit 8,T rac k 8 9 9 Digit 9, T rack 9 0 0 Digit 0, T rack 10 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mut[...]

  • Page 95

    95 KEY FUNCTION UNO-S1 D VD Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Learned Only Halt Halt Lear ned Only AM/FM AM/FM Learned Only Cue Cue Lear ned Only Disk Up[...]

  • Page 96

    96 INST ALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Down Po w e r Po w e r P ower On/Off Ent[...]

  • Page 97

    97 KEY FUNCTION UNO-S1 RECEIVER Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Lear ned Only Halt Halt Learned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned Only D[...]

  • Page 98

    98 INST ALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC A UDIO 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Do wn Po w e r Po w e r P o[...]

  • Page 99

    99 KEY FUNCTION UNO-S1 AMP/MISC A UDIO Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Lear ned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned On[...]

  • Page 100

    100 INST ALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 11 Digit 1, T rack 1,Dsc1 22 Digit 2, T rack 2,Dsc2 33 Digit 3, T rack 3,Dsc3 44 Digit 4, T rack 4,Dsc4 55 Digit 5, T rack 5,Dsc5 66 Digit 6, T rack 6,Dsc6 77 Digit 7, T rack 7,Dsc7 88 Digit 8,T rack 8,Dsc8 99 Digit 9, T rack 9,Dsc9 00 Digit 0, T rck10,Dsc10 V olume Up V olUp V olume Up V olume Dow[...]

  • Page 101

    101 KEY FUNCTION UNO-S1 CD Off Off Off, P ower On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Lear ned Only Dim Dim Lear ned Only Close Close Learned Only Open Open Lear ned Only Halt Halt Lear ned Only AM/FM AM/FM Lear ned Only Cue Cue Lear ned Only Disk Up Disk[...]

  • Page 102

    102 INST ALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Br ight,Raise Up Channel Dn Ch Dn Dim,Lower Down Po w e r Po w e [...]

  • Page 103

    103 KEY FUNCTION UNO-S1 HOME CONTROL Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only Dim Dim Lear ned Only Close Close Lear ned Only Open Open Lear ned Only Halt Halt Lear ned Only AM/FM AM/FM Learned Only Cue Cue Lear ned On[...]

  • Page 104

    104 INST ALLER SOURCE NAMES UNO-S1 UNO-S2 Au x AU X A ux 1 A UX 1 A ux 2 A UX 2 Blues Blues Cable Cab le Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Pla yer CD 1 CD Pla yer 1 CD 2 CD Pla yer 2 CD 3 CD Pla yer 3 Class Classical Compr Computer Cntr y Countr y CustomName1 Cus[...]

  • Page 105

    105 UNO-S1 UNO-S2 RepTV Repla yTV Rock Roc k Sat Satellite Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 SatRd Sat Radio Src 1 Source 1 Src 2 Source 2 Src 3 Source 3 Src 4 Source 4 Src 5 Source 5 Src 6 Source 6 Src 7 Source 7 Src 8 Source 8 Spcl Special T ape T ape T ape1 T ape 1 T ape2 T ape 2 TiV o TIV O T uner T uner UNO-S1 UNO-S2 T un 1[...]

  • Page 106

    INST ALLER SETUP FORMS T uner Russound N/A Peripher al N/A N N/A N N/A N/A 106[...]

  • Page 107

    Mute INST ALLER SETUP FORMS 107[...]

  • Page 108

    INST ALLER SETUP FORMS 108[...]

  • Page 109

    CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 102.5 102.5 102.5 RCA Cables 102.5 102.5 102.5 UNO-S1 UNO-S1 Sharing a single CAM6.6T (internal tuner) with multiple controllers This arrangement can support up to six CAM6.6 units for up to 36 zones/6 sources. Each additional CAM6.6 must have an incremental Con[...]

  • Page 110

    CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT ST2 Dual Tuner Back P anel 102.5 102.5 1[...]

  • Page 111

    SAMPLE CONFIGURA TIONS MUL TIPLE CONTROLLERS WITH THREE TUNERS Sharing an ST2 Dual T uner with multiple CAM6.6 con- trollers (with and without tuners) The configuration below is suitable for 7 to 12 zones that can access the ST2 Dual T uner and the CAM6.6T tuner . This configuration uses RCA “Y” cables from the ST2 T uner source outputs to conn[...]

  • Page 112

    TECHNICAL SPECIFICA TIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS into 8 Ohms THD+N: <0.05% Signal to Noise Ratio[...]

  • Page 113

    113 WARRANTY & REP AIR The Russound CAM6.6 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will r eplace any defective par ts and correct any defect in workmanship without char ge for either parts or labor . For this warranty to apply , the unit must[...]

  • Page 114

    114 NOTES[...]

  • Page 115

    115 NOTES[...]

  • Page 116

    CAM6.6 Six-Zone, Six-Source Controller CAM6.6T Six-Zone, Six-Source AM/FM Receiver INSTRUCTION MANUAL Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www.russound.com Copyright ©2006 Russound ® All rights reserved. All trademarks are pr operty of their respective owners. Specifications s[...]