Samsung 740T manual

Install dr ivers Install pr ograms SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N / 940Be[...]

Notationa l Failure to follow directio ns noted by this symbol could resu lt in bodily harm or damage to the equipmen t. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your comp[...]

Do not use a damaged or loo se plug. z This may cause electric shock or fire. Do not pull the pl ug out by the wire nor touch the plug with wet hands. z This may cause electric shock or fire. Use only a prop erly grou nded plug a nd receptac le. z An improper ground may cause electr ic shock or equipment damage. Insert the power p lug firmly so tha[...]

Installa tion Be sure to contact an authorized Service Cente r, when installing your moni tor in a location with heavy dust, high or low temperatures, high humidity, a nd exposed to chemical substances and wh ere it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause seri ous damage to your monitor. Place your [...]

Put down the monitor carefully. z Failing to do so may damage the monitor. Do not place the monitor face do wn. z This may damage the TFT -LCD surface. The install ation of the bracket m ust be done b y a qualified pr ofessional. z Installing the bracket by unq ualified personnel may resu lt in injury. z Always use the mounting device sp ecified in[...]

Use the recommended dete rg ent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, cl ean it properly using a dry cloth . z A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the prod uct. z Otherwise, this may cause electric shock or fire. Unplug the pow er cord[...]

If the monitor is dropped or the casi ng is damaged, turn the moni tor off and unplug the power cord. Then contact a Servi ce Center. z The monitor may malfunction, caus ing electric shock or fire. Disconnect the plug from th e outlet durin g storms or lightning or if it is not used for a long period of time. z Failure to do so may cause ele ctric [...]

Do not insert metal objects such as chopsticks, wi re and tools or inflammabl e objects su ch as paper or matches in to the vent, he adphone port or AV ports . z This may cause electric shock or fire. If an alien substances or water enters the product, turn the produc t off, unplug the power connector from the wall outlet and contact a Serv ice Cen[...]

z Otherwise, this may cause heat emission from the accumulated dirt or degraded insu lation, causing electric shock or fire. Do not place your children' s favorite toys or any other o bjects of intere st on the product. z Children may try to climb on the pr oduct to retrieve an object. The product could fall, causing physical damage or even de[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ty[...]

Monitor & Slidin g Stand Type 4 Monitor & Lowest HAS Stand Manual Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front[...]

MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Curren tly six different mode s are available: C ustom, Text, Internet, Game, Sport and Mov ie. Each[...]

AUTO button Use this button for auto adjustmen t. Power button [ ]/ Power indicator Use this button for turn the monitor on and off. / This light glows blue during normal oper ation, and blinking blue once as the monitor saves your adjustments. See PowerSaver described in the ma nual for furthe r information regarding power saving functions. For en[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ma[...]

Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [[...]

the pre-configured value s may not be comfortable for your eyes depending on your taste. If this is the case, adjust th e brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as [...]

Sim p le stand Pivot stan d (The configuration at th e back of the mo nitor may vary from produ ct to product.) POWER port Connect the power cord for your monitor to the power port on t he back of the monitor. DVI IN port Connect the DVI Cable to the DVI port on the back of your monitor. RGB IN port Connect the signal cable to th e 15-pin, D-sub po[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ty[...]

Monitor & Slidin g Stand Type 4 Monitor & Lowest HAS Stand Manual Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord Front[...]

MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Curren tly six different mode s are available: C ustom, Text, Internet, Game, Sport and Mov ie. Each[...]

See PowerSaver described in the ma nual for furthe r information regarding power saving functions. For energy conservation , turn your monit or OFF when it is not needed, or when leaving it unattended for long p eriods. Rear Simple stand Pivot stand / Slid ing Stand (The configuration at th e back of the mo nitor may vary from produ ct to product.)[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ma[...]

Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord Front MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is [...]

the pre-configured value s may not be comfortable for your eyes depending on your taste. If this is the case, adjust th e brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as [...]

of the monitor. RGB IN port Connect the signal cable to th e 15-pin, D-sub port on the back of yo ur monitor. Kensington Lock The Kensington lock is a device used to physically fix the system to something when usi ng it in a public place. (The locking device has to be purchased separately.) For usi ng a locking device, contact the place of purchase[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Monitor & Pivot stand Manual Quick Setup Guide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™[...]

Front MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Curren tly six different mode s are available: C ustom, Text, Internet, Game, Sport and Mov ie[...]

Enter button [ ] / Source button Activates a highlighted menu item. / Push the ' ', then selects the video signal while the OSD is off. (When the source b utton is pressed to change th e input mode, a message appears in the upp er left of the screen displayin g the current mode -- analog or dig ital input sign al.) Note : If you select th[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Slidin g Stand[...]

Monitor & Lowest HAS Stand Manual Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front[...]

MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Curren tly six different mode s are available: C ustom, Text, Internet, Game, Sport and Mov ie. Each[...]

AUTO button Use this button for auto adjustmen t. Power button [ ]/ Power indicator Use this button for turn the monitor on and off. / This light glows blue during normal oper ation, and blinking blue once as the monitor saves your adjustments. See PowerSaver described in the ma nual for furthe r information regarding power saving functions. For en[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Slidin g Stand[...]

Quick Setup Gu ide Warranty C ard (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front MENU button [ ] Opens the OSD me nu. Also use to exit the OSD menu or return to the previous menu. MagicBright™™ [[...]

the pre-configured value s may not be co mfortable for your eyes depending on your taste. If this is the case, adjust th e brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as[...]

Sim p le stand Slidin g Stand (The configuration at th e back of the mo nitor may vary from produ ct to product.) POWER port Connect the power cord for your monitor to the power port on t he back of the monitor. DVI IN port Connect the DVI Cable to the DVI port on the back of your monitor. RGB IN port Connect the signal cable to th e 15-pin, D-sub [...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on t he back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Using the DVI (Digital)[...]

Using the Stand Monitor Assembl y Monitor and Bo ttom Pivot Stand / Slidin g Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple stand Pivot stand Sliding Stand Lowest HAS Stand A. Monitor B. Mounting interface pa d (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the [...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on t he back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Connected to a Macintos[...]

Monitor Assembl y Monitor and Bo ttom Swivel stand Pivot Stand / Slidin g Stand[...]

A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. Simple stand Pivot stand Sliding Stand Lowest HAS Stand A. Monitor B. Mounting interface pa d (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath[...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on t he back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the 'DVI-A to D-SUB' Cable to the RGB IN port on the back of your monitor. [ RGB IN ] 2-2. Using the [...]

Using the Stand Pivot Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pa d (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3[...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on t he back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Connected to a Macintos[...]

Monitor Assembl y Monitor and Bo ttom Pivot Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple st and Pivot stan d A. Monitor B. Mounting interface pa d (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting in terface pad with [...]

4. If you can see following messa ge window, then click the "Continue Anyway" bu tton. Then click "OK" button. (Microsoft ® Windows ® XP Operating System) 5. Monitor dr iver installation is comple ted. This monitor driver is under certifying MS logo,and this in stallation don't damage your system.The certified driver will[...]

3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " b[...]

7. Click the " Browse " button then ch oose A:(D:Driver) and choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following " Messag e " window, then click the " Continue Anyway " button. Then click " OK " button. This monitor driver is under certified MS lo[...]

10. Moni tor driver instal lation is comp leted. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose " OK " button on the " Insert disk " window . 2. Click the " Browse " button on the " File Needed " window. 3. [...]

not normal, change to a different mode (lower mode of resolution, colo rs or frequency). If there is no Mode at All Display Modes , select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guid e. Linux Operating Sys tem To execute X-Window, you need to make th e X86Config file, which is a type of sy[...]

ROM Drive, click the Windows [Start] but ton, select [Run...]. Enter D:colorNCProsetup .exe and then press the <Enter> key. (If the drive where the CD is inserted is no t D:, enter the applicable drive.) Uninstalling the Na tural Color Software Prog ram Select "Setting/Control Panel" on the "Start" menu and then double-[...]

1. [ ]Opens the on-screen menu and exits from the menu or clo ses the adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to Activates a highlig hted menu item. 4. [ AUTO ]Press to Self-Adjusts the incoming PC signal automatically. Th e values of fine,coarse and position are adju sted automatically . A[...]

Menu Description AUTO When the ' AUTO ' button is pre ssed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustment locki ng feature. MagicBright™ Menu Description MagicBright™ Push the MagicBright butto n to circle through available preconfigu red mod[...]

Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off.[...]

Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness acco[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , Normal, Warm and Custom. ( Not available in MagicColo r mode of Full and Intellig ent. ) Color Control Adjusts individual R,G,B color balance. ( Not available in MagicColo r mode of Full and[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of 9 la nguages. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor. V-[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Col or parameters are replaced wi th the factory default values. Information[...]

Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Opens the on-screen menu and exits from the menu or clo ses the adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to Activates a highlig hted menu item. 4. [ AUTO ]Press to Self-Adjusts the incoming PC signal automatically. Th e values of fine,coarse and position are adju sted automatically . A[...]

Menu Description AUTO When the ' AUTO ' button is pre ssed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustment locki ng feature. MagicBright™ Menu Description MagicBright™ Push the MagicBright butto n to circle through available preconfigu red mod[...]

Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness according to perso nal preference. Direct Acce ss Feature : When OSD is n ot on the sc reen, push the button to adj ust brightness. Contrast You can use the on-screen menu s to change the contrast according to personal pre ference. ( Not available in Mag[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

Menu Description Play/Stop Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the cente r using the horizontal control menu. (Available in ana log mode only) Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning , repeat it after adjusting the[...]

Menu Description Play/Stop Languag e You can choose one of 9 la nguages. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the [...]

Menu Description Play/Stop Image Reset Image parameters are replaced with the factory default values. Color Reset Col or parameters are replaced wi th the factory default values. Information Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Opens the on-screen menu and exits from the menu or clo ses the adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to Activates a highlig hted menu item. 4. [ AUTO ]Press to Self-Adjusts the incoming PC signal automatically. Th e values of fine,coarse and position are adju sted automatically . A[...]

Menu Description AUTO When the ' AUTO ' button is pre ssed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustment locki ng feature. MagicBright™ Menu Description MagicBright™ Push the MagicBright butto n to circle through available preconfigu red mod[...]

Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off.[...]

Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Priority Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the bright[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , Normal, Warm and Custom. ( Not available in MagicColo r mode of Full and Intellig ent. ) Color Control Adjusts individual R,G,B color balance. ( Not available in MagicColo r mode of Full and[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of eight langua ges. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Col or parameters are replaced wi th the factory default values. Priority This is a source-switch function according to the priority that the user[...]

Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Opens the on-screen menu and exits from the menu or clo ses the adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to Activates a highlig hted menu item. 4. [ AUTO ]Press to Self-Adjusts the incoming PC signal automatically. Th e values of fine,coarse and position are adju sted automatically . A[...]

Menu Description AUTO When the ' AUTO ' button is pre ssed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustment locki ng feature. MagicBright™ Menu Description MagicBright™ Push the MagicBright butto n to circle through available preconfigu red mod[...]

Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off.[...]

Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness acco[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , Normal, Warm and Custom. ( Not available in MagicColo r mode of Full and Intellig ent. ) Color Control Adjusts individual R,G,B color balance. ( Not available in MagicColo r mode of Full and[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of eight langua ges. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Col or parameters are replaced wi th the factory default values. Information[...]

Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Opens the on-screen menu and exits from the menu or clo ses the adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to Activates a highlig hted menu item. 4. [ AUTO ]Press to Self-Adjusts the incoming PC signal automatically. Th e values of fine,coarse and position are adju sted automatically . A[...]

Menu Description AUTO When the ' AUTO ' button is pre ssed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustment locki ng feature. MagicBright™ Menu Description MagicBright™ Push the MagicBright butto n to circle through available preconfigu red mod[...]

Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. Picture Brightness Contrast Color MagicColor Color Tone Color Co ntrol Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness according to perso nal preference. Direct Acce ss Feature : When OSD is n ot on the sc reen, push the button to adj ust brightness. Contrast You can use the on-screen menu s to change the contrast according to personal pre ference. ( Not available in Mag[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the screen a fter applying[...]

Menu Description Play/Stop Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the cente r using the horizontal control menu. (Available in ana log mode only) Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning , repeat it after adjusting the[...]

Menu Description Play/Stop Languag e You can choose one of 8 la nguages. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the [...]

Menu Description Play/Stop Image Reset Image parameters are replaced with the factory default values. Color Reset Col or parameters are replaced wi th the factory default values. Information Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

Over view | Ins ta ll ati on | OSD Mode | Color Calibration | Uninstall | Troubl eshooting Overview What is MagicTune™ ? Monitor performance can va ry due to the graphics card, host computer ligh ting conditions and other environmental fa ctors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortu[...]

The OSD mode allows easy adjustment of monitor settings without taking pre-defin ed steps. You can access the desired men u item to set with ea se.[...]

Overv iew | Insta llation | OSD Mode | Co lor Calibration | Uninstal l | Troubleshooting Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicTune™ instal lation file. 3. Select inst allation L anguage, C lick "Next". 4. When th e Installatio n Shield Wiza rd wind ow appea rs, click "Next ." 5. S[...]

z Windows™ 2 000 z Windows™ XP Home Edition z Window s™ XP Prof ession al Hardwar e z 32 MB Memory abov e z 60 MB H ard d isk s pace ab ove * For more information, visit the MagicTune™ websi te . It is re commende d using MagicTune™ i n Windows™ 2000 or late r.[...]

Overv iew | In s tal la tio n | OS D M ode | Color Calibration | Uninstal l | Troubl eshooting OSD Mode T he OSD mode makes the ad j ustment of settin g s on all monitors eas y . When select ed , each tab on to p of the control window d isplays the gene ral descriptions of the sub-menu items for adju stment. When selec ted, each tab disp lays a lis[...]

Picture Tab Definition Allows the u ser to a djust the sc re en setti ngs to the de sired values. Brightness Make s the enti re scr een brig hter or darker . The detai led da ta of the im ages in the dark areas can be lost if the brightness is not adjusted to the proper level. Adjust the brig htness for best v iewing conditio ns. Contrast Adjusts t[...]

MagicColor and Gamma will be shown only in the moni to r tha t sup po rts the se f unc tio ns. ColorTone The t one of the color can be change d. z Warm2 - Warm1 - Cool 1 - Cool 2 - Cool 3 - Cool 4 - Cool 5 - Co ol 6 - Cool 7 z Off ColorTone mode will be differe nt according to monitor models. Some mon itor will only s upport Four modes( W arm, Norm[...]

MagicCol or pla yers als o can be hig hlight ed but co uld ha ve some problem s. { Tusk men u HUE Adjust the tint of the color. Saturatio n Adjusts the color saturation. Brightness Adjus ts the B rightne ss. Sharp ness Adju sts the diff erence be tween the light est and da rkest area s of the displ ay. Zone O ff Turn off the zone that you have capt[...]

z Hue - To adj ust the co lor tone. z Reset - To reset the monitor s ettings to the factory defaults. Image Tab Definit ion Adjusts the Fine , Coarse an d Posi tion va lues. Image Setup z Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tu ning, repeat it after adjusting the frequency (clo ck spee d). z Coarse [...]

z Custom - Partia l Color Blindne ss Test z Reset - To reset the monitor s ettings to the factory d efaults. PIP When external A/V devic es such as VCRs or DVDs are connected to the monitor, PIP allows you to watch video from th ose devic es in a small wind ow supe r-impose d on the PC Vide o signal. (Off / On) PIP Turn the PIP Scre en on or off. S[...]

Asset ID you can us e the serv er to contro l the Client monitor. (Server pro gram should be instal led to us e this pro gram as Cli ent) When selecting the Customize checkbox at the bottom you can e nter your personal inf ormation. User Na me Show s the use r name th at is reg istere d in PC. User ID Shows the user ID that is register in PC. Serve[...]

Overv iew | Ins tal la tio n | OSD Mode | Color Calib ration | Uninstal l | Troubles hooting Color Calibrati on 1. Colo r Calibrati on Color Calibration guides yo u to get opti mal color condition for your monitor. Procee d following 5steps for g etting optimal monitor c olor condition . 1. Control "Brightness control bar" for matching th[...]

The abo ve pictur e will be sho wn. 1. Press "View Calibrated " button to see the ca libration effect which you ad justed. 2. Press "View Uncali brated" button to see the original image.[...]

Overv iew | Ins tal la tio n | OSD Mode | Color Calibration | Uni nstall | Troub leshooting Uninstall The Magi cTune™ p rogram ca n be removed only by usin g the "Add or Remove Prog rams" opt ion of the Windows ™ Control Panel. Perform the follow ing steps remove MagicT une™ . 1. Go to [Task Tra y] ' [Start] ' [Settings] a[...]

Overv iew | In st all at io n | OSD Mode | Color Calibration | Uninstal l | Troubleshooting Troubleshooting The curre nt computing sy stem is not com patible with M agicTune™ . Please pres s OK and click on the "Sh ortcut to the Magi cTune™ site" to v iew our home page for further refe rence. An error ma y occur w hen your v ideo/grap[...]

Hardware > Device Manager > M onitor is sel ected, t he current "Pl ug-and-play monitor" is remov ed and new ha rdware is s earched for but the s ystem coul dn't find any "P lug -and -pl ay mo nit or" . Please v isit our ho mepage to s ee the Troub leshoo ting secti on. An error oc curs when repl acing the monitor wit[...]

Adapter. Visit the video card manuf acturer's h omepage an d downlo ad and i nstall the latest drive r. For more i nformat ion about th e video ca rd, cont act the card manufa cturer. As the High light progr am uses the c ommunicati on lines, please ex it the Highlig ht program befo re you can access MagicTune™ . Some of Sa msung CDT monito [...]

z Visi t the MagicTu ne™ webs ite for technical support for MagicTune™ , FAQs (questions and answe rs) and soft ware u pgrade s. z Visi t the MagicTu ne™ webs ite and down load the instal lation so ftware fo r Magic Tune™ MAC. program is al ready installed, remove it, reb oot the computer , and then i nstall the program again. You need to r[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Overview What is MagicRotation? Traditionally, computer displays allowed the user to view only in landscape mode. In today's information ag e, more users need to view documents, web p ages, emails, etc. in there day to day life. These types of applications can be better viewed i[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Installation 1. Insert the inst allation CD into the CD-ROM drive. 2. Click the MagicRotation installation file. 3. Select installation Language, Click "N ext". 4. When the InstallShield Wizard window appears, click "Next." 5. Select "I accept the terms of th[...]

6. Choose a folder to install t he MagicRotation program . 7. Click "Install." 8. The "Setup Sta tus" windo w appears .[...]

9. Click "Finish." Have to reboot the system in order for the MagicRotation to work properly. 10. When the installation is complete, the MagicRotation executable icon appears on your desktop. Installation Problems The installation of MagicRota tion can be af fected by the factors such as video card, motherboard and the network environment[...]

movie files properly in 90, 180 and 270 orientations then do the following : { Close the application. { Select the Orienta tion (90, 180, 270) you want to view the applic ation. { Relaunch the application. In most cases this should fix the problem. 3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientatio[...]

Overview | Installation | Interface | Uninstall | Troubleshooting z When Rotation is functio ning, portion of MagicTu ne™ program may not operate normally. z AutoRotation : The screens display will auto matically rotate when the monitor is rotated. To execute Auto Rotation, it should be done as be low. z Please install both MagicRotation and Magi[...]

Rotate to 90 : Display will be rotated 90 degrees from the current angle. Rotate to 180 : Display will be rotated 180 degrees from the current angle.[...]

Rotate to 270 : Display will be rotated 270 degrees from the current angle. Hot key : Hot Keys are available by default and can be changed by user. It can be assigned by user directly with keyboard after changing the existing HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. In case only general key is [...]

[...]

Overview | Installation | Interface | Uninstall | Troubleshoo ting Uninstall The MagicRotation program can be removed only by using the "Add/Remove Programs" opti on of the Windows Control Panel. Perform the following steps to remove MagicRotation. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the men[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Troubleshooting Before You Call Technical Support z MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display Driver" is working incorrectly or has bugs [...]

Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Mode","Recommend ed mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute a nd then disappears. Please change to the recommended mode duri ng this one- minute peri od[...]

resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ¡ Display ¡ Settings . Has the video card been set properly? Set the video card by [...]

Q & A Question Answ er How can I chan ge the frequency? The frequency can be changed by reconfiguri ng the video card. Note that video card support ca n vary, depending on the versi on of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at th[...]

Environment The location and the position of the monitor may influe nce the quality and othe r features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to anothe r room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the mon[...]

Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

disappears. Please change to the recommended mode duri ng this one- minute peri od. (The message is displayed ag ain if the system is rebooted.) There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerS aver mode. press a key on the keyboard to activate the monitor and restore th[...]

Control Panel -> Performance an d Maintenance -> Syste m -> Hardware -> Device Manager -> Monitors -> After dele ting Plug and Play monitor, find 'Plug and Play monitor' by searching ne w Hardware. MagicTune™ is an a dditional software for the monitor . Some graphic cards may no t support your monitor. When you have a [...]

Self-Test Feature Check Self-Test Feature Check | Warning Messages | Environment | Useful Tip s Y our monitor provides a self test feature t hat allows yo u to ch eck whether your mon itor is functioni ng properly . Self-Test Feature Check 1. Turn off both your comp uter and the monitor. 2. Unplug the video cable fr om the back of the computer. 3. [...]

1024 60 Hz" message comes up, di sconnect the cable from the computer while the monitor is still powered on. { If there is a message coming up on the screen or if th e screen goes white, this means th e monitor is in working con dition. { In this case, check the computer for trouble.[...]

Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Hz, a "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute a nd then disappears. Please change to the recommended mode duri ng t[...]

(The maximum frequency per resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ¡ Display ¡ Settings . Has the video card been set prope[...]

Q & A Question Answ er How can I chan ge the frequency? The frequency can be changed by reconfiguri ng the video card. Note that video card support ca n vary, depending on the versi on of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at th[...]

Environment The location and the position of the monitor may influe nce the quality and othe r features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to anothe r room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the mon[...]

General General Model Name SyncMaster 740B LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input S[...]

Dimensions (WxHxD)/ Weight (Pivot Stand) 366.0 x 391. 2 x 200.0 mm / 14.4 x 15.4 x 7.9 in ch (with Basic Stand) / 4.7 kg Dimensions (WxHxD)/ Weig ht (Sliding Stand) 366.0 x 391. 2 x 200.0 mm / 14.4 x 15.4 x 7.9 in ch (with Basic Stand) / 4.7 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 366.0 x 351. 4 x 200.0 mm / 14.4 x 13.8 x 7.9 in ch (with [...]

This monitor is EPA ENERGY STAR ® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DP MS functionality. As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the [...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940B LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input S[...]

Dimensions (WxHxD)/ Weight (Pivot Stand) 407.6 x 408.0 x 200.0mm / 16.0 x 16.1 x 7.9 inch (with Basic Stand) / 5.55 kg Dimensions (WxHxD)/ Weig ht (Sliding Stand) 407.6 x 408.0 x 200.0mm / 16.0 x 16.1 x 7.9 inch (with Basic Stand) / 5.7 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 407.6 x 368. 2 x 200.0 mm / 16.0 x 14.5 x 7.9 in ch (with Basic[...]

This monitor is EPA ENERGY STAR ® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DP MS functionality. As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the [...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 740N LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input S[...]

366.0 x 391. 2 x 200.0 mm / 14.4 x 15.4 x 7.9 in ch (with Basic Stand) / 4.7 kg Dimensions (WxHxD)/ Weig ht (Sliding Stand) 366.0 x 391. 2 x 200.0 mm / 14.4 x 15.4 x 7.9 in ch (with Basic Stand) / 4.7 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 366.0 x 351. 4 x 200.0 mm / 14.4 x 13.8 x 7.9 in ch (with Basic Stand) / 4.8 kg VESA Mounting Inter[...]

functionality. As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may[...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Fn LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input [...]

VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal consider ations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, non -condensing Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C) Humidity: 5% ~ 95%, non-conde nsing Plug and Play Cap ability This monitor can be[...]

Table 1. Prese t Timing Modes Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 48 0 35.000 66.667 30.240 -/- MAC, 832 x 62 4 49.726 74.551 57.284 -/- MAC, 1152 x 8 [...]

General General Model Name SyncMaster 540B LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 1024 x 768@75 Hz Input Signal,[...]

Dimensions (WxHxD)/ Weight (Pivot Stand) 337.5 x 333.8 x 180.0mm / 13.3 x 13.1 x 7.1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal consider ations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, non -condensing Storage Temperatur[...]

Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjust the screen as foll ows. Table 1. Prese t Timing Mod es Display Mo[...]

General General Model Name SyncMaster 540N LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 1024 x 768@75 Hz Input Signal,[...]

337.5 x 333.8 x 180.0mm / 13.3 x 13.1 x 7.1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal consider ations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, non -condensing Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C) Hum[...]

Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjust the screen as foll ows. Table 1. Prese t Timing Mod es Display Mo[...]

General General Model Name SyncMaster 740T LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input S[...]

Dimensions (WxHxD)/ Weig ht (Sliding Stand) 362.1 x 389. 6 x 200.0 mm / 14.4 x 15.3 x 7.9 in ch (with Basic Stand) / 4.5 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 362.1 x 349. 8 x 200.0 mm / 14.4 x 13.8 x 7.9 in ch (with Basic Stand) / 4.6 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen t[...]

product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjus[...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940T LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input S[...]

Dimensions (WxHxD)/ Weig ht (Sliding Stand) 403.2 x 406. 4 x 200.0 mm / 16.0 x 16.0 x 7.9 in ch (with Basic Stand) / 5.3 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 403.6 x 366.3 x 200.0 mm / 16.0 X 14.4 X 7.9 inch (with Basic St and) / 5.4 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen ta[...]

product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjus[...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940N LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input Si[...]

407.6 x 408.0 x 200.0mm / 16.0 x 16.1 x 7.9 inch (with Basic Stand) / 5.55 kg Dimensions (WxHxD)/ Weig ht (Sliding Stand) 407.6 x 408.0 x 200.0mm / 16.0 x 16.1 x 7.9 inch (with Basic Stand) / 5.7 kg Dimensions (WxHxD)/ Weight (Low est HAS Stand) 407.6 x 368. 2 x 200.0 mm / 16.0 x 14.5 x 7.9 in ch (with Basic Stand) / 5.8 kg VESA Mounting Interface [...]

functionality. As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may[...]

many times per second to display an imag e to the user. The frequency of this repetition is called the Vertical Fr equency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Be LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input [...]

Dimensions (WxHxD)/ Weig ht (Sliding Stand) 403.2 x 406. 4 x 200.0 mm / 16.0 x 16.0 x 7.9 in ch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal consider ations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, non -condensing Storage Tempe[...]

Preset Timi ng Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal differs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjust the screen as foll ows. Table 1. Prese t Timing Mod es Display Mo[...]

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Sa msung products, p lease contact the SAMSUNG customer care center. North Amer ica U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.samsung.com/mx Latin America ARGENT[...]

BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 55 4 http://www.samsung.com/fi FRANCE 08 25 3260 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,14/Mi n) http://www.samsung.de HUNGARY 06-80-SAMSUNG (7267864) http:[...]

PHILIPPINES 1800-10-SAMSUNG (7267864) http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG (7267864) http://www.samsung.com/sg THAILAND 180 0-29-3232, 02-689 -3232 http://www.samsung.com/th TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com/vn Middle East & Africa SOUTH AFRICA 086 0 7267864 (SAMSUNG) http://w[...]

1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in th e screen if the best quality of picture is not provided in TFT-LCD. { Resolution: 1280 x 1024 { Vertical frequency (refresh rate): 60 Hz 2. TFT LCD pane ls manufac[...]

MÉXIC O IMPORTADO POR: SAMSUNG ELECTRONIC S MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P. 54940 Tel: 01-55-574 7-5100 / 01- 800-726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Ye ongtong - gu, Suwon City, Gyeonggi -do Korea[...]

PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from on e image to another especially after displaying a st ationary image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover any damage c[...]

Ex) The best way to protect your monitor from Image retention is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operate d under normal conditions. Normal conditions are defined as continuously changing vi deo patterns. When the LCD panel is operated f[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collec tion systems) This marking shown o n the product or its literature, indicates tha t it should not be disposed w ith other househ old wastes at the end of its working life. T[...]