Samsung C27A750X manual

User Manual C23A750X / C27A750X The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance. BN46-00037 F -0 1[...]

2 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change with out notice to improve qua lity. 2011 Sam sung Electron ics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronic s is[...]

3 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as th e panel and exte rior of advanced LCDs are easily scr atched. Take the following steps when c leaning. 1. Power off the monitor and computer. 2. Disconnect the power c ord from the monitor. Hold the power cable by the plug and do not touch the ca[...]

4 Before Using the Product Before Using the Product Securing the Installation Space z Keep the requ ired distances between the product and other obje cts (e.g. walls ) to ensure p roper ventilation. Failing to do so may result in fire or a problem with the product due to an in crease in the internal tem perature. The appearance may differ depending[...]

5 Before Using the Product Before Using the Product Warning Do not use a damaged p ower cord o r plug, or a loose powe r socket. z An electric shock or fire may re sult. Do not plug many prod ucts into the sam e power socket . z Otherwis e, the socket may overheat and cause a fire. Do not touc h the power p lug with wet ha nds. z Otherwis e, an ele[...]

6 Before Using the Product Before Using the Product Caution Installation Warning Do not unplug the power cord when the prod uct is in use. z The product may become damage d by an electric sho ck. Do not use the po wer cord for prod ucts other than a uthorized produc ts supplied by Samsung. z An electric shock or fire may re sult. Keep the po wer so[...]

7 Before Using the Product Before Using the Product Caution Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surfa ce, etc.). z The product m ay fall and break o r cause a pers onal injury. z Using the produ ct in an area w ith excess vibration m ay damage the product or cause a fire. Do not install th e pro[...]

8 Before Using the Product Before Using the Product Operation Warning Put down the p roduct carefully. z The product m ay fall and break o r cause a pers onal injury. Installing the product in an unusual place (a place expose d to a lot of fine particles, chemical sub stances or extreme tempe ratures, or an airport or train station whe re the produ[...]

9 Before Using the Product Before Using the Product Do not put a heavy object , toy, or swee ts on top of the product. z The product or heavy objects may f all as children tr y to reach for the toy or sweets resulting in a serious injury. During a lightn ing or thund erstorm, re move the powe r cord and do not touc h the antenna cable . z An electr[...]

10 Before Using the Product Before Using the Product Caution Do not insert a metallic object (a chopstick, coin , hair pin, etc.) o r inflammable object (p aper, match, e tc.) into the v ent or ports of the pr oduct. z If water or an y foreign substan ce enters t he product, be sure to power off the product, rem ove the pow er cord, an d contact Sa[...]

11 Before Using the Product Before Using the Product Do not let water en ter the DC powe r device or get th e device wet. z An electric shock or fire may re sult. z Avoid using the product ou tdoors wher e it can be ex posed to rain or snow. z Be careful no t to get the DC p ower adapter wet when you w ash the floor. Do not put the DC power ad apte[...]

12 Before Using the Product Before Using the Product Correct posture to use the product Exercise caut ion when ad justing the prod uct angle o r stand height. z Otherwis e, children' s fingers or ha nds may beco me stuck and in jured. z Tilting th e product e xcessively may cau se it to fa ll and result in personal injury. Do not place heavy o[...]

Table Of Cont ents 13 Table Of Contents BEFORE USING THE PRODUCT 2 Copyright 2 Icons used in this manual 2 Symbols for safety precautions 3 Cleaning 3 Cleaning 4 Securing the Installation Space 4 Precautions for storage 4 Safety Precautions 4 Electricity and Safety 6 Installation 8O p e r a t i o n 12 Correct posture to use the product PREPARATIONS[...]

Table Of Contents Table Of Cont ents 14 35 Configuring the Cent ral Station Monitor IP 35 Dynamic IP 37 Static IP 39 Notice before your use of Wireless USB or USB Mode CONNECTING AND USING A SOURCE DEVICE 40 Before Connecting 40 Pre-connection Checkpoints 41 Connecting and Using a PC 41 Connecting to a PC 43 Driver Installation 44 Setting Optimum R[...]

Table Of Contents Table Of Cont ents 15 55 Response Time 55 Configuring Response Time 56 HDMI Blac k Level CONFIGURING TINT 57 Red 57 Configuring Red 57 Green 57 Configuring Green 58 Blue 58 Configuring Blue 59 Color Tone 59 Configuring the Color Tone Settings 60 Gamma 60 Configuring Gamma RESIZING OR RELOCATING THE SCREEN 61 Auto Adjustment 61 Con[...]

Table Of Contents Table Of Cont ents 16 SETUP AND RESET 66 HUB 66 Auto Wireless Detection 66 Wireless Connection 67 USB Connection 68 Analog 68 HDMI 69 USB Super Charging 70 Wireless ID 70 Eco Saving 70 Configuring Eco Saving 71 Menu Transparency 71 Changing Menu Transparency 71 Language 71 Changing the Language 72 PC/AV Mode 72 Configuring PC/AV M[...]

Table Of Contents Table Of Cont ents 17 77 Configuring Brightne ss in the Startup Screen 78 Configuring Volume in the Startup Screen 79 Configuring HUB in the Initial Screen TROUBLESHOOTING GUIDE 80 Requirements Before Contacting Samsung Customer Service Center 80 Testing the Product 80 Checking the Resolution and Frequency 80 Check the followings.[...]

18 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not to dam age the product whe n you open the packa ging with a sharp instrum ent. 2 Remove the Styr ofoam from the produc t. 3 Check the com ponents and remove the Styrofoam and plastic bag. z The appearance of actual compo[...]

19 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purch ased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components z Components may differ in different locations. z The cleaning cloth is only supplied with the black[...]

20 Preparations 1 1 Preparations Items sold separately The following items can be purchased at your nearest retailer. LAN cable HDMI-DVI cable USB cable[...]

21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Buttons z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z This is a touch-type button. Tap the button lightly with a finger. z The printed board assembly (PBA) inside this product may heat the stand. A hot s[...]

22 Preparations 1 1 Preparations Icons Description z Open or cl ose the onscr een displa y (OSD) menu , or retu rn to th e last menu. z OSD control loc k: Maintain the current s ettings, or loc k the OSD control to p revent uninten ded change s to settings. To lock th e OSD control, press the MENU button [ ] for five seconds. To unlock the locked O[...]

23 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n Connects to a PC using the D-SUB cable. Connects to a network u sing the L AN cable. Connects to a PC via a USB cable. This port can only connect to[...]

24 Preparations 1 1 Preparations 1.2.3 Left Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n Connects to an aud io output device such as hea dphones. HDMI IN Connects to a source de vice using an HDMI cable. / Connects to a source device v[...]

25 Preparations 1 1 Preparations 1.2.4 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n Connects to a source device via a USB cable. Com patible with a USB cable version 2.0 or lower. The USB 2.0 port is black in color.[...]

26 Preparations 1 1 Preparations 1.2.5 Adjusting the Prod uct Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z The monitor tilt and height can be adjusted. z Hold the top center of the product and adjust the tilt carefully. 100 52° 30 25° 52°[...]

27 2 Using "Central Station" 2 Using "Central Station" You can use "Central Station" by connecting the produc t to a PC through the Wireless USB func tion or a USB cable. "Central Station" system al lows the product to function as a HUB so that you can connect a device directly to the product to control the d[...]

28 Using "Central Station" 2 2 Using "Central Station" 4 After installing the integrated PC driver "Samsung Central Stat ion Setup," customize the audio output port setting s as required. (Control Panel->Audio->Speaker->Speaker Setup) z "SAMSUNG Central Station Setup" software consis ts of "Sams[...]

29 Using "Central Station" 2 2 Using "Central Station" according to this priority, from left to rig ht: Analog mode > HDMI mode > Wireless USB mo de > USB mode. If the product connects to a PC for the first time, the optimum resolution (1920 x 1080) will be selected automatically and a me ssage will appear confirming th[...]

30 Using "Central Station" 2 2 Using "Central Station" The table can be an obsta cle and degrad e wireless perfo rmance if the Ce ntral Station mo nitor is not placed at the same h eight as the t ransmitter (do ngle) on the PC, even if the m onitor and transmitter face each othe r. z The sensit ivity of the sign al reception/ tr[...]

31 Using "Central Station" 2 2 Using "Central Station" 4 Double-click t he hub mon itor to open the following sc reen. If a connection is estab lished between the product and PC, [ ] will appear ov er the signal intensity bars as shown below and th e product w ill display the PC s creen. If [ ] do es not appea r, the connection [...]

32 Using "Central Station" 2 2 Using "Central Station" z Rename : Customize the nam e of the co nnected mon itor. The program will automatically activate to allo w you to use the Wireless USB connection even when the "Wireless Display" window is closed. Automatic/manual Wireless USB connection Set Auto Wireless Detecti[...]

33 Using "Central Station" 2 2 Using "Central Station" 2.4 Utilizing "Central Station" Central Station is on ly available when the product is conn ected to a PC via Wireless USB or a USB ca ble. 2.4.1 Using the Prod uct as a USB HUB Using the pro duct as a hub , connect an d use various sou rce devices with the pr oduc[...]

34 Using "Central Station" 2 2 Using "Central Station" z An external mass-storage HDD requires external powe r supply. Be sure to connect it to a power source. Connect a m obile IT device such a s an MP3 playe r or smart pho ne to the pro duct when co nnected to a PC. This allows you to use the devic e from the PC or c harge the[...]

35 Using "Central Station" 2 2 Using "Central Station" This is achieved by an internal chip th at transmits data received via the LAN cable to the PC as a converted USB sign al. Connecting to a LAN via Wirele ss USB Connecting to a LAN via USB cable This product cannot connect to multiple sour ce PCs at the same time and vice ve[...]

36 Using "Central Station" 2 2 Using "Central Station" network infor mation such a s the IP addre ss to the PC, an d the transm itted netwo rk information is automatically reg istered to the ne twork settings on the PC. The DH CP service is co nvenient and use ful especially in an enviro nment where m ultiple PCs are u sed. Theo[...]

37 Using "Central Station" 2 2 Using "Central Station" Select Properties Internet Protocol Version 4 (TCP/IPv4) Properties. 2.5.2 Static IP To configure t he IP address (private or official) on your PC, someone (mostl y a server system) must distribute and allot a n IP addres s to the PC. An officia l IP address is allotted b y [...]

38 Using "Central Station" 2 2 Using "Central Station" “LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Ad apter #7”), select Properties Internet Protocol Version 4 (TCP/IPv4) Properties, and configure the static IP and DNS settings. 5 After configuring the IP, click OK. The following message w ill appear. A static IP must be all[...]

39 Using "Central Station" 2 2 Using "Central Station" 2.6 Notice before your use of Wireless USB or USB Mode 1 Most of the games re quire high reso lution and fast response time. Whe n you play a game, we recommend to use Analog or HDMI Mode rather t han Wireless USB or USB Mode. Al so, for pl aying Game and Movie clips on Wi n[...]

40 3 Connecting and Us ing a Source Device 3 Connecting and Using a Source Device 3.1 Before Connecting 3.1.1 Pre-connection Checkpoints z Before connectin g a source devic e, read the user manual pro vided with it. The number and locations of ports on source device s may differ from device to dev ice. z Do not connec t the power cable until all co[...]

41 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2 Connecting and Using a PC 3.2.1 Connecting to a PC z Select a connection m ethod suitab le for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (Analogue type) 1 Connect the D -SUB cable to th e D-SUB port o n the back o[...]

42 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Connection Using an HDMI Cable (Digital Type) 1 Connect an HD MI cable to th e HDMI por t on the side of the product and the HD MI port on t he PC. 2 Connect the D C power ad apter to th e product and a power so cket, and tur n on the po wer switch on the PC. Be sure [...]

43 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.2 Driver Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers for this product. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit t[...]

44 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and chan ge the resolu tion to the op timum value. 1 Press [ ] to move to the lan gu[...]

45 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.4 Changing the Re solution Using a PC z Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Re solution on Wind[...]

46 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Contr ol Panel Personaliza tion Display Settings and chan ge the r esolution . → → 12 34 *********** ***********[...]

47 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Re solution on Window s 7 Go to Contr ol Panel Display Scre en Resolution an d change the r esolut ion. → → **** **** 12 34[...]

48 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.3 Connecting to a Video Device z The product can be connec ted to a video devic e. Connecting parts may differ in different products. 3.3.1 Connection Us ing an HDMI Cable 1 Connect an HD MI cable to th e HDMI ports o n the product and video device . 2 Press [ ] to [...]

49 4 Screen Setup 4 Screen Setup Configure the screen settings such as brightness and color tone. 4.1 MAGIC This feature pro vides the viewing an gle, brightness, and t int to suit your preferences. 4.1.1 SAMSUNG MAGIC Angle Angle allows you to config ure the settin gs to obtain the optimum pictu re quality accordin g to your viewing angle. You can[...]

50 Screen Setup 4 4 Screen Setup z Lean Back Mode 2 : Select this optio n to view from a place lowe r than Lean B ack Mode 1 mode. z Standing Mode : Sele ct this option to view from a place higher than the pr oduct. z Side Mode : Select this o ption to view from either side of the p roduct. z Group View : Select this option for mo re than one view [...]

51 Screen Setup 4 4 Screen Setup z Game : Obtain a picture quality suitable for playing games that involve many graph ic effects and dynamic movements. z Cinema : Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. z Dynamic Contrast : Obtain balanced bri ghtness throug h automati c contrast ad justment. In AV mo[...]

52 Screen Setup 4 4 Screen Setup 4 Press [ ] to move to Color and press [ ] on the product. Th e following screen wil l appear. z Off : Disable Col or . z Demo : Compare nor mal screen mod e with Color mode. z Full : Obtain a vivid picture q uality for all areas includ ing the flesh colors in the pictur e. z Intelligent : Improve th e chroma for a [...]

53 Screen Setup 4 4 Screen Setup 4.3 Contrast Adjust the cont rast between th e objects and b ackground. (Range: 0~100) A higher va lue will increase t he contr ast to mak e the obje ct appear clearer . This option is not available when Color is in Full or Intelligent mode. 4.3.1 Configuring Contrast 1 Press [ ] on the product. 2 Press [ ] to move [...]

54 Screen Setup 4 4 Screen Setup 3 Press [ ] to move to Sharpness an d press [ ] on the pr oduct. The fo llowing scr een will appear . 4 Adjust the Sharpness using the [ ] button. 4.5 Coarse Adjust the scre en frequenc y. Only available in Analog mode. 4.5.1 Adjusting Coarse 1 Press [ ] on the product. 2 Press [ ] to move to Picture and press [ ] o[...]

55 Screen Setup 4 4 Screen Setup 4.6 Fine Fine-adjust the sc reen to obt ain a vivid pict ure. Only available in Analog mode. 4.6.1 Adjusting Fine 1 Press [ ] on the product. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to Fine and press [ ] on the p roduct. The fo llowing scree n will appe ar. 4 Adjust the Fine [...]

56 Screen Setup 4 4 Screen Setup 3 Press [ ] to move to Response Time and press [ ] on the product. The following scre en will appear. 4 Press [ ] to m ove to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 4.8 HDMI Black Level If you use the pro duct by conn ecting to a DVD player or set-top box wi th a HDMI cable,[...]

57 5 Configuring Tint 5 Configuring Tint Adjust the tint of the screen. This option is not available when Bright is set to Cinema or Dynamic Contrast mode. 5.1 Red Adjust the valu e of the colo r red in the p icture. (Range : 0~100) A higher value wil l increase the in tensity of the c olor. This option is not available when Color is in Full or Int[...]

58 Configuring Tint 5 5 Configuring Tint 3 Press [ ] to move to Green and press [ ] on the produ ct. The followin g screen w ill appear. 4 Adjust the Green u sing the [ ] button. 5.3 Blue Adjust the valu e of the colo r blue in the p icture. (Ran ge: 0~100) A higher value wil l increase the in tensity of the c olor. This option is not available whe[...]

59 Configuring Tint 5 5 Configuring Tint 5.4 Color Tone Adjust the gen eral color tone of the pictur e. z This option is not available when Angle is enabled. z This option is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring the Color Tone Settings 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and pr ess [ ] on t[...]

60 Configuring Tint 5 5 Configuring Tint 5.5 Gamma Adjust the mid-ra nge brigh tness (Gamma) of the pict ure. This option is not available when Angle is enabled. 5.5.1 Configuring Gamma 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and pr ess [ ] on t he product. 3 Press [ ] to move to Gamma and press [ ] on the product. The following sc[...]

61 6 Resizing or Relocating the Screen 6 Resizing or Relocating the Screen 6.1 Auto Adjustment This function c an be used t o automatica lly adjust the Coarse , Fine and position settings. This function can be used to autom atically detect and remove noise o n the screen and correct the scr een position. This function w ill automatically run if the[...]

62 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen  Auto : Display the pictu re according to the aspe ct ratio of th e input sourc e.  Wide : Display the pict ure in full screen regar dless of the aspect rat io of the input source. In AV mode  4:3 : Display the picture with an aspect ratio of 4:3. Su itable for vide[...]

63 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 3 Press [ ] to move to H-Position and press [ ] on the product. The following screen will appear. 4 Adjust the H-Position using the [ ] button. 6.4 Vertical Position Move the scr een up or dow n. z Only available in Analog mode. z H-Position or V-Position can be adjusted if [...]

64 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.5 Menu H-Position Move the menu posit ion to the left or right. 6.5.1 Configuring Me nu H-Position 1 Press [ ] on the produ ct. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the product. 3 Press [ ] to move to Menu H-Position and pr ess [ ] on the product. The [...]

65 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.6 Menu V-Position Move the me nu position up or down. 6.6.1 Configuring Menu V-Position 1 Press [ ] on the produ ct. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the product. 3 Press [ ] to move to Menu V-Position and press [ ] on the produc t. The following s[...]

66 7 Setup and Reset 7 Setup and Reset 7.1 HUB Configure the se ttings to use the HUB function on th e product. z Refer to "2.1 About "Central Station"" for details about how to use the HUB function. z To open the HUB settings screen, press HUB on the stand. 7.1.1 Auto Wireless Detection If the product is con nected to a PC via [...]

67 Setup and Reset 7 7 Setup and Reset Activating Wireless Connection 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [] on the product. 3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a Wireless USB connection is e stablished or di sconnected. 4 If a Wireless USB connectio[...]

68 Setup and Reset 7 7 Setup and Reset 7.1.4 Analog You can view th e Analog cable co nnection statu s between the product a nd a PC. z The connection status will be shown even when the input source is not Analog mode. z Selecting the Analog option when an analog cable is connected will change the input source to Analog mode. Configuring Analog 1 P[...]

69 Setup and Reset 7 7 Setup and Reset 4 If an HDMI ca ble is connecte d, press [ ] to move to HDMI and press [ ]. The input source will change to HDMI mode . 7.1.6 USB Super Charging A source device's batte ry can be charged qu ickly via USB 3.0 port on the produ ct. z Data transmission is n ot available if USB Super Charging is on. z To enab[...]

70 Setup and Reset 7 7 Setup and Reset 7.1.7 Wireless ID Wireless ID is a unique ID assigned to a monitor. The "Samsung Ce ntral Station Setup" prog ram reads the ID and id entifies each of n earby monitors. Th e ID is shown in the "Samsung Central Sta tion Setup" program and in the lower part of th e HUB menu. 7.2 Eco Saving Ad[...]

71 Setup and Reset 7 7 Setup and Reset 7.3 Menu Transparency Set the transp arency for th e menu windo ws: 7.3.1 Changing Menu Transparency 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the prod uct. 3 Press [ ] to move to Menu Transparency and press [ ] on the produc t. The following screen will appear. 4 Pre[...]

72 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Language and press [ ] on the produc t. The following sc reen will app ear. 4 Press [ ] to m ove to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 7.5 PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarge d. This option is us eful when you v[...]

73 Setup and Reset 7 7 Setup and Reset 7.6 Auto Source Activate Auto Source . 7.6.1 Configuring Auto Source 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to Auto Source and pr ess [ ] on the product. The following s creen will appear. z Auto : The input sou rce is automati call[...]

74 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Display Time and press [ ] on the product. The fo llowing screen will appear. 4 Press [ ] to m ove to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 7.8 Key Repeat Time Control the response ra te of a butto n when the b utton is press ed. 7.8.1 Configuri[...]

75 Setup and Reset 7 7 Setup and Reset 7.9 Off Timer On/Off Enable or disable th e off timer that au tomatically po wers off the product. 7.9.1 Configuring Off Timer On/Off 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to Off Timer On/Off and press [ ] on the produc t. The foll[...]

76 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Off Timer Setting an d press [ ] on the product. The follo wing screen will appear. 4 Press [ ] to configure Off Timer Sett ing . 7.11 Reset Return all the sett ings for the produ ct to the defau lt factory settings. 7.11.1 Initializing Settings (Reset) 1 Press [ ] on the produ ct. 2 Pre[...]

77 8 INFORMATION Menu a nd Others 8 INFORMATION Menu and Others 8.1 INFORMATION View the current i nput sour ce, freq uency and r esolutio n. 8.1.1 Displaying INFORMATION 1 Press [ ] on the product. 2 Press [ ] to move to INFORMATION . The c urrent input s ource, frequen cy and resolut ion will appear. 8.2 Configuring Brightness in the Startup Scre[...]

78 INFORMATION Menu and Others 8 8 INFORMATION Menu a nd Others 8.3 Configuring Volume in the Startup Screen Adjust Volume using the [ ] button in th e startup scre en where the re is no on sc reen display m enu available. Only available in HDMI mode. 1 Press [ ] in the startup screen. The following screen will appear. 2 Adjust the Volum e using th[...]

79 INFORMATION Menu and Others 8 8 INFORMATION Menu a nd Others 8.4 Configuring HUB in the Initial Screen The HUB setting s screen ca n be opened b y pressing the [ ] button o n the stand w hen the initial screen (that displays no OSD menu) is displayed. 1 Press the [ ] bu tton when the initial screen is d isplayed. You can configure the settings f[...]

80 9 Troubleshooting Guide 9 Troubleshooting Guide 9.1 Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by using the pr[...]

81 Troubleshooting Guide 9 9 Troubleshooting Guide " Not Optimum Mode " is disp layed. This message ap pears if the signal f rom the graphics car d exceeds t he maximum reso lution or frequency fo r the produ ct. Change the maximu m resolution and freque ncy to suit the produ ct performanc e, referring t o Standard Si gnal Mode Table (pag[...]

82 Troubleshooting Guide 9 9 Troubleshooting Guide The volume is too low. Adjust the volume. If the volume is still low af ter turning it up to the maximum level, a djust th e volume on your PC sound card or software program. Source device issu e A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, ha[...]

83 Troubleshooting Guide 9 9 Troubleshooting Guide 9.2 Q & A Question Answer How can I change the frequency? Set the frequ ency on your graphics car d. z Windows XP: Selec t Control Panel Appear ance and Themes Display Settings Advanced Monitor, and adjust Refresh ra te under Monitor settings. z Windows ME/2000: Select Control Panel Display Set[...]

84 Troubleshooting Guide 9 9 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution? z Windows X P: Go to Control Panel Appearanc e and Themes Display Setting s and adjust th e resolution. z Windows ME/ 2000: Go to Contr ol Panel Display Settings and adjust[...]

85 10 Specifications 10 Specifications 10.1 General The above specifications are subject to change without notice to improve quality. Model Name C23A750X C27A750X Panel Size 23.0 inch / 58cm 27.0 inch / 68cm Display area 286.74 mm (V) x 509.76 mm (H) 11.3 inches (V) x 20.1 inches (H) 336.15 mm (V) x 597.6 mm (H) 13.2 inches (V) x 23.5 inches (H) Sy[...]

86 Specifications 10 10 Specifications Class B device (broadcast communications device for home use) This Class B device designed for home use is registered for EMC requirements and can be used in all regions. (Class B devices emit less electr omagnetic radiation than Class A devices) 10.2 PowerSaver The power-sa ving function of this produ ct redu[...]

87 Specifications 10 10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one res olution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you selec[...]

88 Specifications 10 10 Specifications 10.4 PC Dongle Specificatio n (UWB : Ultra Wide Band) Standard UWB Host Interface USB 2.0 Downstream Interface Frequency Ran ge 3.1GHz ~ 10.6Ghz (Operat i ng 3.16GHz ~ 8.97Ghz, BG1, BG2, BG6) Security AES128 Data Rate 53 .3 to 480 Mbps Sensitivity / Output Pow er Transmitted sign al PSD -41.3 dBm/MHz (Regulato[...]

89 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA CANADA 1-800-SAMSUNG (726-7864 ) http://www.samsung .com MEXICO 01-800-SAMSUNG (726-786 4) h ttp://www.samsung.c om U.S.A 1-800-SAMSUNG (726-7 864) http ://www.samsu ng.co[...]

90 Appendix Appendix HONG KONG (85 2) 3698 4698 http://www.samsung.com /hk http://www .samsung.c om/ hk_en/ INDIA 3030 8282, 1 800 3000 828 2 http://www.samsung.com INDONESIA 0800-112-8888 021 -5699-7777 http://www.samsung .com JAPAN 0120-327-527 http ://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung .com PHILIPPINES 1-800-10- SAMSUNG (72[...]

91 Appendix Appendix Terminology OSD(On Screen Display) On screen display (O SD) allows you to config ure on-screen sett ings to optimize the pic ture quality as required. It allows you to ch ange the scr een brightne ss, tint, size and many othe r settings us ing menus displayed on the scr een. HUB HUB refers to a devi ce that is a co mmon connect[...]

92 Appendix Appendix the screen refr eshes 60 times per se cond. The scree n scanning rate de pends on the perf ormance of the graphic s cards in your PC a nd monitor. Horizontal Frequency Characters or image s displayed on the monitor screen consist of numerous dots (pixels). Pixe ls are transmitte d in horizontal lines, which ar e then arran ged [...]

Index 93 Index A About "Central Statio n" 27 Auto Adjustment 61 Auto Source 73 B Before Co nnecting 40 Blue 58 Brightness 52 C Checking the C ontents 18 Cleaning 3 Coarse 54 Color Tone 59 Configuring Brightness in the Startup Screen 77 Configuring Volume in the Startup Screen 78 , 79 Connecting and Using a PC 41 Connecting He adphones 48 [...]

Index Index 94 PC/AV Mode 72 PowerSaver 86 Q Q & A 83 R Red 57 Requirements Befo re Contacting Sams ung Customer Service Center 80 Reset 76 Response Time 55 S Safety Precautions 4 Sharpness 53 Size 61 Software Insta llation for Usin g "Central Station" 27 Standard Sign al Mode Table 87 T Terminology 91 U Utilizing "Central Statio[...]