Samsung ME40A manual

BN46-00098C- 0 2 User Manual ME40A ME46A ME55A The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance.[...]

2 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change with out notice to improve qua lity. © 2011 Samsung Electronics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronics is[...]

3 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as th e panel and exte rior of advanced LCDs are easily scr atched. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. Storage High-glossy models can develo p w[...]

4 Before Using the Product Before Using the Product Safety Precautions Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTR IC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicat es that high voltag e is present ins ide[...]

5 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged p ower cord o r plug, or a loose powe r socket. z An electric shock or fire may re sult. Do not use m ultiple pro ducts with a sing le [...]

6 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord wh ile the produc t is being used. z The product may become damaged by an electric sho ck. Only use the p ower cord pr ovided with yo ur produc t by Samsung. Do not use the power cord with other pro ducts. z A fire or electric shoc k ma[...]

7 Before Using the Product Before Using the Product Caution Keep the plastic packa ging out of the reach of ch ildren. z Children may suffoca te. Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surfa ce, etc.) z The product may fall and become dam aged and/or ca use an injury. z Using the produ ct in an are[...]

8 Before Using the Product Before Using the Product Operation Warning When installing the pr oduct on a cabi net or shelf, make su re that the bottom edge of th e front of th e product is n ot protruding . z The product may fall and become dam aged and/or ca use an injury. z Install the product only on cabinets or shelves of the right size. Set dow[...]

9 Before Using the Product Before Using the Product Do not leave he avy objects or item s that children like (toys, sweets, etc.) on top of the produc t. z The product or heavy objects may f all as children tr y to reach for the toys or sweets resulting in a serious injury. During a lightn ing or thund erstorm, re move the powe r cord and do not to[...]

10 Before Using the Product Before Using the Product Caution Do not insert m etallic objects (cho psticks, coins, hairpi ns, etc) or objects that burn easily (paper, match es, etc) into th e product ( via the ven t or input/outp ut ports, etc ). z Be sure to powe r off the produ ct and disconn ect the power cord when wat er or other fore ign substa[...]

11 Before Using the Product Before Using the Product Do not use humidifi ers or stoves ar ound the prod uct. z A fire or electric shoc k may result. Rest your eye s for more t han 5 minutes for every 1 h our of prod uct use. z Eye fatigue will be relie ved. Do not touc h the screen when the pr oduct has be en turned o n for an exte nded period of t[...]

Table Of Cont ents 12 Table Of Contents BEFORE USING THE PRODUCT 2 Copyright 3 Cleaning 3S t o r a g e 4 Safety Precautions 4S y m b o l s 5 Electricity and Safety 6 Installation 8O p e r a t i o n PREPARATIONS 22 Checking the Contents 22 Removing the Packaging 23 Checking the Components 25 Parts 25 Control Panel 27 Reverse Side 28 Anti-theft Lock [...]

Table Of Contents Table Of Cont ents 13 52 Connecting and Using a PC 52 Connecting to a PC 55 Changing the Resolution 57 Connecting to a Video Device 57 Connection Using the AV Cable 57 Connection Using the Component Cable 58 Connection Using an HDMI-DVI Cable 58 Connection Using an HDMI Cable 59 Connecting an External Monitor 60 Connecting to an A[...]

Table Of Contents Table Of Cont ents 14 73 Cloning 74 Command Retry 75 Getting Started with MDC 77 Main Screen Layout 78 Menus 78 Home 78 Volume 79 Alert 80 Screen Adjustment 80 Custom 82 Options 83 Size 84 Sound Adjustment 84 Bass 84 Treble 84 Balance (L/R) 84 SRS TS XT 85 System Setup 85 Video Wall 87 PIP 88 General 88 Fan & Temperature 89 Se[...]

Table Of Contents Table Of Cont ents 15 96 Other Func tions 96 Resizing a Window 97 Group Management 99 Schedule Management 101 Troubleshooting Guide 102 How display properties are shown when multiple displays are used SCREEN ADJUSTMENT 103 Picture Mode 103 If the input source is PC , DVI or DisplayPort 103 If the input source is AV , Component , H[...]

Table Of Contents Table Of Cont ents 16 112 Picture Options 112 Color Tone 112 Color Temp. 113 Digital Noise Filter 113 MPEG Noise Filter 113 HDMI Black Level 113 Film Mode 113 Reset Picture SOUND ADJUSTMENT 114 Sound Mode 115 Sound Effect 116 Broadcast Audio Options 117 Speaker Settings 117 Reset Sound MEDIA 118 Favorites 119 Functions on the Favo[...]

Table Of Contents Table Of Cont ents 17 132 Videos / Photos / Music - Additional Functions 132 Sorting the file lists 133 Videos / Photos / Music Play Option menu 135 Source 135 Source 136 Edit Name 136 Edit Favorites 136 Information 136 Refresh 137 AllShare NETWORK 138 Network Setting 138 Connecting to a Wired Network 139 Wired Network Settings 14[...]

Table Of Contents Table Of Cont ents 18 156 Menu Language 156 Eco Solution 156 Energy Saving 157 Eco Sensor ( Off / On ) 157 No Signal Power Off 157 Auto Power Off ( Off / On ) 158 Caption 158 Caption 158 Caption Mode 159 Digital Caption Options 160 Security 160 Safety Lock ( Off / On ) 160 Button Lock ( Off / On ) 161 Program Rating Lock ( Off / O[...]

Table Of Contents Table Of Cont ents 19 171 General 171 Max. Power Saving 171 Game Mode 172 BD Wise 172 Auto Power 172 Standby Control 172 Lamp Schedule 172 OSD Display 173 Power On Adjustment 173 Temperature Control 173 Device Name 174 Anynet+(HDMI-CEC) 174 Anynet+(HDMI-CEC) 175 Auto Turn Off ( No / Yes ) 177 DivX® Video On Demand 178 Network Rem[...]

Table Of Contents Table Of Cont ents 20 190 Local Schedule Manager 190 Registering a Local Schedule 193 Modifying a Local Schedule 194 Deleting a Local Schedule 196 Running a Local Schedule 197 Stopping a Local Schedule 198 Viewing the details of a Local Schedule 199 Contents Manager 199 Copying content 200 Deleting conten t 201 Internal AutoPlay 2[...]

Table Of Contents Table Of Cont ents 21 216 Optimum Picture Qu ality and Afterimage Burn-in Prevention 216 Optimum Picture Quality 217 Prevention of Afterimage Burn-in 219 Terminology INDEX[...]

22 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Remove the blac k locking device at the bottom of the box. 2 Using the grooves in the bo x, lift and remove the t op of the box. 3 Check the compo nents and remove the styrofoam an d plastic bag . The appearance of actual components may differ from the image s[...]

23 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the vendor where you purchased the product if any components are missing. z The appearance of the components and items sold separately may differ from the image shown. z A stand is not provided with the product. To install a stand, you can purchase one separately. Components C[...]

24 Preparations 1 1 Preparations Items sold separately z The stand is not supplied. z The following items can be purchased at your nearest retailer. Wall-mount KIT RS232C-Stereo Cable DVI cable HDMI-DVI cable HDMI cable DP cable RCA stereo ca ble Video cable LAN cable Stereo cable Component cable RCA cable[...]

25 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z Keep the area between the remote sensor and remote control obstacle-free. Sensor Description Selects the input so urce that an ex ternal device is c o[...]

26 Preparations 1 1 Preparations Use this button for turning the Display on and off. Remote sensor Receives signals from the remote To control t he remote c ontrol in front o f the produ ct, lower the remote control sen sor in the dire ction of th e arrow (indica ted in the zoomed-in image on the pr evious page) . Keep the area between the remote s[...]

27 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n [IR / AMBIENT SENSO R IN] Supplies power t o the external se nsor board or r eceives the light sensor signal [IR OUT] Receives the inpu t signal via[...]

28 Preparations 1 1 Preparations Assembling the Holder-Wire stand z Stand: Sold se parately 1.2.3 Anti-theft Lock z An anti-theft lock allows you to use th e product securely even in public places. z The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for detai[...]

29 Preparations 1 1 Preparations 1.2.4 Remote Control z Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. z Remote control button functions may differ for different products. z This is a special remote control for the visually impaired persons and [...]

30 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Media , Network , System or Support in the displayed OSD menu scre en. 3. Chang e settings as de sired. 4. Finish setting. 5. Close the onscree n display (OSD) menu. MENU EXIT[...]

31 Preparations 1 1 Preparations Remote Control Reception Range Use the remo te control with in 7m to 10m from the sen sor on the p roduct at an a ngle of 30˚ from the left and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together . Replace both batteries at the same time. z Remove batteri[...]

32 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. z Ensure that an authorized installa tion company installs the wall mount. z Otherwise, it may fall and cause personal injury. z Make [...]

33 Preparations 1 1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall Figure 1.1 Side view A Minimum 40 mm B Ambient temperat ure: Under 35 C z When installin g the product on a pe rpendicular wall, allo w at least 40 mm of space bet ween the product a nd wall surface for ve ntilation and en sure that the ambient temperature is[...]

34 Preparations 1 1 Preparations 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details. When installing the product on an indented wall, al low at least the space specified above between the product and wall for ventilation and ensure th at the ambient temperature is kept below 35 C. 3. Installation in an [...]

35 Preparations 1 1 Preparations 1.4 Dimensions (Unit: mm) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors. 1 2 3 4 5 Model name ME40A 920.0 885.6 498. 2 534.5 29.9 ME4[...]

36 Preparations 1 1 Preparations 1.5 Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount. We recommend y[...]

37 Preparations 1 1 Preparations Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock. z Standard dimensions for wall mount kits are shown in the table below. z Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. z Do[...]

38 Preparations 1 1 Preparations 1.6 Remote Control (RS232C) 1.6.1 Cable Connection z Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No. 3), GND (N o. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin Signal 1 Detect d ata car rier 2 Received da ta 3 Transm[...]

39 Preparations 1 1 Preparations z RS232C cable Connector: 9-Pin D-Sub to Stereo Cable z Connection -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 1 2 3 Tx Rx Gnd STEREO PLUG 1 5 9 6 -P2- (STEREO PLUG) (3.5ø) 1 2 3 -P1- RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

40 Preparations 1 1 Preparations 1.6.2 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command z Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. z All communications take place in hexadecimals . The checksum is calculat ed by adding up all values except the he ader. I[...]

41 Preparations 1 1 Preparations z To control all de vices connected by a serial cable simultaneously irrespec tive of IDs, set the ID as "0xFE" and transm it commands. Com mands will be exe cuted by each device but ACK will n ot respond. Power control z Function A TV/monitor can be power ed on and o ff using a PC. z Viewing power state ([...]

42 Preparations 1 1 Preparations Volume control z Function The volume o f a TV/monit or can be a djusted using a PC. z Viewing volume sta te (Get Volume Stat us) z Setting the vo lume (Set Volume ) "Volume": Volume value code to be set o n a TV/monitor (0-100) z Ack "Volume": Volume value code to be set o n a TV/monitor (0-100) [...]

43 Preparations 1 1 Preparations Input source control z Function The input so urce of a TV/mo nitor can be ch anged using a PC. z Viewing input sour ce state (Get Inp ut Source Status) z Setting the in put source (Se t Input Source ) "Input Source ": An input sou rce code to b e set on a T V/monitor  DVI_video, HDMI1_PC and HDMI2_PC ca[...]

44 Preparations 1 1 Preparations z Ack "Input Source ": An input sou rce code to b e set on a T V/monitor z Nak "ERR": A code show ing what error ha s occurred Header Command ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘A’ 0x14 "Input Source" Header Command ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA[...]

45 Preparations 1 1 Preparations Screen z Function The screen mode of a TV/ monitor can be changed using a PC. Screen mode cannot be c ontrolled whe n the Video Wall function is enabled . This control can only be used on models that include a TV. z Viewing scree n status (Get Screen Mode Status) z Setting the p icture size (Set Pictur e Size) "[...]

46 Preparations 1 1 Preparations Screen size control z Function The screen size of a TV/mon itor can be changed us ing a PC. z Viewing the screen size (Ge t Screen Size Stat us) z Ack "Screen Size": TV/ monitor screen size (range: 0 – 25 5, unit: inch) z Nak "ERR": A code show ing what error ha s occurred Header Command ID Dat[...]

47 Preparations 1 1 Preparations PIP On/Off control z Function The PIP mode of a TV/monitor can be turned on or off using a PC.  Only available on models that have the PIP function.  The mode cannot be controlled if Video Wall is set to On .  This function is not available in MagicInfo. z Viewing PIP on/off state (Get the PIP ON / OFF Stat[...]

48 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically ad just the PC system screen usin g a PC. z Viewing auto adjustm ent state (Get Au to Adjustment Statu s) z Setting auto adjustment (Se t Auto Adjustment) "Auto Adjustment" : 0x00 (at all times) z Ack z Nak "ERR": A code show ing [...]

49 Preparations 1 1 Preparations Video Wall Mode Control z Function Video Wall Mode can be activated on a TV/monit or using a PC. This contro l is only available on a TV/mon itor whose Video Wall is enabled. This funct ion is not av ailable in MagicInfo. z Viewing video wall mode (Get Video Wall Mode) z Setting the video wall (Set Video Wall Mode) [...]

50 Preparations 1 1 Preparations Safety Lock z Function PC can be us ed to turn the Safety Lock function on or off on a TV/mo nitor. This contro l is available reg ardless of whether or n ot the power is turned on. z Viewing the saf ety lock state (Get Safety Lock Status) z Enabling or disabling safety lock (S et Safety Lock Ena ble / Disable) &quo[...]

51 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before you co nnect this produc t with other d evices. Devices that can be connec ted to this prod uct include PCs, ca mcorders, sp eakers, set to p boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints z Befor[...]

52 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z A PC can be conne cted to the pr oduct in a variety of ways. Select a connection m ethod suitab le for your PC. z After conn ecting th e PC, connect th e power cab le. Connecting parts may differ in different pr[...]

53 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN RGB / DVI / DP / HDMI AUDIO IN HDMI IN[...]

54 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN[...]

55 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d. Changing the Resolution on Windows XP Go to Cont[...]

56 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and change the resolution.[...]

57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting to a Video Device z You can con nect a video device to the product using a cable.  Connecting parts may differ in different products.  After connecting a source device, press the SOURCE button on the remote control and select the connected source [...]

58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.3 Connection Usin g an HDMI-DVI Cable z Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. z Supported resolutio[...]

59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p ) z For better p icture and a udio quality, co nnect to a d igital device using an HDMI cable. z An HDMI cable suppo rts digital vide o and audio signals, and does not requ ire an audio ca ble.  To connec t the [...]

60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.6 Connecting to an Audio System 2.3.7 Connecting to an Antenna AUDIO OUT ANT IN VHF/UHF Antenna[...]

61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Changing the Input source 2.4.1 Source MENU [] Media Source ENTER [ ] Source allows you to select a variety of sources an d change so urce device n ames. Source You can display the screen of a source device connected t o the product . Select a source from Source L[...]

62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box Connect the DP-HDMI cable to the [HDMI] port on the prod uct and the [MAGICINFO] port o n the network box . For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. 2.5.[...]

63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 3 Select the d efault applicat ion you want to r un when MagicInf o starts. 4 Enter the IP in formation. MagicInfo Setup Wizard - v .1.12 Select Application - step 1 MagicInfo Pro (LAN, W AN based version) MagicInfo-i Premium (Web-based version) Select Later < Back[...]

64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 5 Select a language. (T he default lang uage is English.) 6 Select a display mode . MagicInfo Setup Wizard - v .1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language : Engilsh German English French I[...]

65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 7 Double-check the settings yo u have just co nfigured. z If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen. z For further details on how to use MagicInfo , refer to the MagicI[...]

66 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an application that allo ws you to easily control multiple dis play devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settin gs for Multi Control z MDC Connection[...]

67 Using MDC 3 3 Using MDC 3.2 Connection Using an RS232C-stereo Cable 3.3 Connection Using a LAN Cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. RS232C IN/OUT RJ45[...]

68 Using MDC 3 3 Using MDC 3.4 Connection Using the RS232C-stereo and LAN Cables Multiple products can be connected using the [RS232C IN / OUT] port on the product. RS232C OUT RJ45[...]

69 Using MDC 3 3 Using MDC 3.5 MDC Program Installation/Uninstallation 3.5.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not di splayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 Click "Nex[...]

70 4 What is MDC? 4 What is MDC? Multiple di splay control "MDC" is an applicat ion that allows you to easily control m ultiple display devices simultaneously using a PC. 4.1 Connecting to MDC 4.1.1 Using MDC via RS-232C (serial data co mmunications standards) An RS-232C ser ial cable must b e connected t o the serial ports on the PC a nd[...]

71 What is MDC? 4 4 What is MDC? 4.2 Connection Management Connection m anagement includes the Connection list and Connection list modification options . Connection list - Connection list shows the det ails of the connectio ns such as conne ction setting (IP/ COM, Port No, MAC, and Conn ection T ype ), conn ection status, Set ID Range , and detecte[...]

72 What is MDC? 4 4 What is MDC? 4.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs co nnected in d aisy-chain of a sele cted connection. There can b e a maximum of 100 LFDs in a connectio n. The Set ID is assigned se quentially in the d aisy- chain runnin g from 1 to 99, and then finally to Set ID 0.[...]

73 What is MDC? 4 4 What is MDC? 4.4 Cloning Using the Cloning feature, you can copy th e setting of one LFD an d apply it to m ultiple selected LFDs. You can select specific tab categ ories or all tab c ategories for clo ning, using the cop y setting option window.[...]

74 What is MDC? 4 4 What is MDC? 4.5 Command Retry This feature is used to specify the maximum number of time s the MDC command will be retried in case of there being no reply or a corrupted reply from an L FD. The ret ry count value ca n be set u sing the MDC options window. The retry coun t value must be b etween 1-10. T he default value is 1 .[...]

75 What is MDC? 4 4 What is MDC? 4.6 Getting Started with MDC 1 To start the program, c lick Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device. z If the connect ion is established via RS232C, go to Serial and spec ify the COM Port .[...]

76 What is MDC? 4 4 What is MDC? z If the connect ion is established via Ether net , enter the IP th at was entered for the display device.[...]

77 What is MDC? 4 4 What is MDC? 4.7 Main Screen Layout Menu Bar Change the status of a display device or the properties of the program. Device Category View a list of connected display devices or device groups. Schedule Category View a list of schedules for display devices. Set List Select the display device you want to adjust. Modify the Set List[...]

78 What is MDC? 4 4 What is MDC? 4.8 Menus You can power on or off a selec ted device or change the input source or volume of the device. Choose display device s from the lis t of sets, and select the Home tab. 4.8.1 Home Select an item and change the corresponding setting. Power z On : Power on a selected display. z Off : Power off a select ed dis[...]

79 What is MDC? 4 4 What is MDC? 4.8.3 Alert z Fault Devic e  This menu sh ows a list of disp lay devices wh ich have follow ing errors - fan error, tem perature error, brigh tness sensor error, or lamp erro r. Select a display device from th e list. The Repair button will be enabled. Click the re fresh button to refresh t he error sta tus of th[...]

80 What is MDC? 4 4 What is MDC? 4.9 Screen Adjustment The screen s ettings (c ontrast, brigh tness, etc.) ca n be adjusted . Choose display device s from the lis t of sets, and select the Picture tab. 4.9.1 Custom Select an item an d change the co rresponding scree n setting. z Color and Tint are not available if the input source is PC . z Red , G[...]

81 What is MDC? 4 4 What is MDC? Red z Customize the in tensity of red c olor for t he selected display device. Green z Customize the intensity of gree n color for the selected display device. Blue z Customize the intensity of blue co lor for the selected display device.[...]

82 What is MDC? 4 4 What is MDC? 4.9.2 Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the g amma value f or the selecte d display. Auto Motion Plus This option is u sed to view dynamic im ages. z Off : Disable the Auto Motion Plus fu nction. z Clear : Set the level of Auto Motion Plus to c[...]

83 What is MDC? 4 4 What is MDC? 4.9.3 Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detail ed configur ation. The -/+ butt ons can be u sed to adju st Zoom . The screen c an be reloca ted using the up/down/left /right button s. Detai[...]

84 What is MDC? 4 4 What is MDC? 4.10 Sound Adjustment You can chan ge the sound settings. Choose display device s from the lis t of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. 4.10.1 Bass Adjust the bass for th e selected display. 4.10.2 Treble Adjust the treb le for th[...]

85 What is MDC? 4 4 What is MDC? 4.11 System Setup Choose display device s from the lis t of sets, and select the System tab. 4.11.1 Video Wall The Vide o Wall function ca n be used to display part of a whole picture or repeat the same picture on each of connec ted multiple dis play devices. Video Wall is enabled only when devices are in the group.[...]

86 What is MDC? 4 4 What is MDC? H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display d evices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assign[...]

87 What is MDC? 4 4 What is MDC? 4.11.2 PIP Basic information re quired to adjust PIP will app ear in the menu sc reen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the curr ent display. PIP Source Select a PIP input source. Sound Select Select and enable the soun[...]

88 What is MDC? 4 4 What is MDC? 4.11.3 General User Auto Color Automatically adju st the screen colors. Available only in PC mode. Auto Power Set the prod uct to automa tically power on. Standby Control Set the stan dby mode to a ctivate if an input sourc e is not detec ted. 4.11.4 Fan & Temperature Configure the settings requ ired to detec t [...]

89 What is MDC? 4 4 What is MDC? 4.11.5 Security Safety Lock Lock the on -screen men us. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . 4.11.6 OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD [...]

90 What is MDC? 4 4 What is MDC? 4.11.7 Time Clock Set Change the c urrent time o n the selected display devic e according to the time set o n a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time to power on the selec ted display d evice. z Off Time : Set the time to power off the selecte[...]

91 What is MDC? 4 4 What is MDC? z Repeat : Specify th e period for which you w ant to repea t the select ed Timer .  Once : Activate the timer only on e time.  EveryDay : Activat e the timer every d ay.  Mon~Fri : Activa te the timer from Monday th rough Friday.  Mon~Sat : Activate the timer on Saturdays and Sundays.  Manual : Custo[...]

92 What is MDC? 4 4 What is MDC? 4.11.8 Screen Burn Protection Pixel Shift Move the scr een slightly at specified time in tervals to prev ent screen bu rn-in. Screen Saver This function p revents screen burn-in when the screen of the selecte d display dev ice is left idle for an extended period of time . z Interval : Set the in terval to activa te [...]

93 What is MDC? 4 4 What is MDC? Safety Screen The Safety Screen function can be use d to prevent screen burn -in when a sta tionary image d isplays on the screen of a display de vice for an ext ended perio d of time. Lamp Control Lamp Control is used to adjust the backlight t o reduce po wer consum ption. Automatically adju st the backligh t of th[...]

94 What is MDC? 4 4 What is MDC? 4.12 Tool Settings 4.12.1 Security Panel Control Turn on or off the scre en of a display device. Remote Control Enable or disable the remote co ntrol. 4.12.2 Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settings . Reset All Reset the screen, sou[...]

95 What is MDC? 4 4 What is MDC? 4.12.3 Edit Column Select the items you want to display in the list of se ts. 4.12.4 Information View the program informati on. 3 4[...]

96 What is MDC? 4 4 What is MDC? 4.13 Other Functions 4.13.1 Resizing a Window Place the mou se pointer on a corner o f the progra m window. An arrow will ap pear. Move the arrow to customize the size of the program window.[...]

97 What is MDC? 4 4 What is MDC? 4.13.2 Group Management Creating Groups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side of the pr ogram window. 2 In the Edit Group window displayed, click Add on the same le vel[...]

98 What is MDC? 4 4 What is MDC? z Add on the sub level : Create a sub-group under the selected group. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a grou p name, and click Edit . 2 In the Edit [...]

99 What is MDC? 4 4 What is MDC? 4.13.3 Schedule Management Creating Schedules Create and r egister a sche dule on a gr oup basis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the program window. The Add button will be enable d in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

100 What is MDC? 4 4 What is MDC? 3 Click Add belo w the Device Gr oup item, an d select the g roup you want to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window. z Device Gr oup : Sele ct a group. z Date&Time  Instant Execut ion : Run the sc[...]

101 What is MDC? 4 4 What is MDC? 4.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want to control does not ap pear on the sy stem information chart. 1. Check the co nnection of [...]

102 What is MDC? 4 4 What is MDC? 4.14.1 How display proper ties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Setting s for the sele cted display are displayed. 3 When two display s are selected (e. g. in sequence o f ID 1 and ID 3 ): The settings for ID 1 [...]

103 5 Screen Adjustment 5 Screen Adjustment Configure the Picture settings ( Brightness , Color Tone , etc.). The layout of the Picture menu options may vary depending on the product. 5.1 Picture Mode MENU [] Picture Picture Mode ENTER [ ] Select a picture mode ( Picture Mode ) suitable for the environm ent where the produc t will be used. Differen[...]

104 Screen Adjustment 5 5 Screen Adjustment 5.2 Backlight / Contrast / Brig htness / Sharpness / Color / Tint (G/R) MENU [] Picture ENTER [ ] Your monitor has several options for adjust ing picture qu ality. Select an option us ing the and arrow keys, and the n press [ ]. Use the arrow ke ys to adjust the option valu e or select an option set ting.[...]

105 Screen Adjustment 5 5 Screen Adjustment 5.3 Screen Adjustment MENU [] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various pic ture size and aspect ratio o ptions. Select an option using the and ar row keys, and th e press [ ]. Use the a rrow keys to selec t an option in the sub-menu, an d then press [ ]. Different Screen Adju[...]

106 Screen Adjustment 5 5 Screen Adjustment z Wide Fit : Enlarges the aspect ratio of the pictur e to fit the enti re screen. z 4:3 : Sets the picture t o basic (4:3) m ode. Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) whic[...]

107 Screen Adjustment 5 5 Screen Adjustment 5.3.2 Position Adjusts the picture po sition. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , or Screen fit or Cust om . z To use the Position fu nction after selecting Zoom1 , Zoom2 or Wide Fit , follow these steps. 1 Press the button to select Position . 2 Press the [ ] b[...]

108 Screen Adjustment 5 5 Screen Adjustment 5.3.4 Resolution Select If the picture is not normal even whe n the resolution of th e graphics card is one of the following, you can optimize the p icture qualit y by selecting the same res olution for the product as the PC using this menu. Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 76[...]

109 Screen Adjustment 5 5 Screen Adjustment 5.5 Advanced Settings MENU [] Picture Advanced Settings ENTER [ ] All Advanced Sett ings are available in the Standard and Movie mod es. To use, se lect an opt ion using the up and down arrow keys, and then press [ ]. Use the ar row keys to c hange the va lue or setting , and then press [ ]. In PC mode, y[...]

110 Screen Adjustment 5 5 Screen Adjustment 5.5.4 Gamma Adjust the primary color intensity. 5.5.5 Expert Pattern Use the Expert Pattern function to calibrate th e picture. If th e OSD menu disa ppears or a menu other than the Pictur e menu is op ened, the pr oduct saves th e calibration and the Expert Pattern screen disappears. z Off Turns the Expe[...]

111 Screen Adjustment 5 5 Screen Adjustment 5.5.9 10p White Balance (Off / On) Controls th e white balance in 10 poin t interval by adjusting the red, green, a nd blue brig htness. z Interval : Select interval to ad just. z Red : Adjust the red level. z Green : Adjust the green level. z Blue : Adjust the blue l evel. z Reset : Resets the 10p White [...]

112 Screen Adjustment 5 5 Screen Adjustment 5.6 Picture Options MENU [] Picture Picture Options ENTER [ ] Select an option u sing the a nd arrow keys, and the press [ ]. Use the arrow keys to ch ange the setting, and the n press [ ]. In PC mode, you can only make changes to the Color Tone . 5.6.1 Color Tone z Off / Cool / Standard / Warm1 / Warm2 z[...]

113 Screen Adjustment 5 5 Screen Adjustment 5.6.3 Digital Noise Filter If the broadca st signal received by yo ur product is weak, you can activat e the Digital No ise Filter feature to reduce any stat ic and ghosting that may appear on the screen. z Off / Low / Medium / High / Auto / Auto Visualization z Auto Visualization : When changing analog c[...]

114 6 Sound Adjustment 6 Sound Adjustment Configure the sound ( Sound ) settings for the product. 6.1 Sound Mode MENU [] Sound Sound Mode ENTER [ ] Use the up an d down arro w keys to selec t an option, and then press [ ]. z Standard : Selects th e normal sou nd mode. z Music : Emphasizes mus ic over voices. z Movie : Provides the best so und for m[...]

115 Sound Adjustment 6 6 Sound Adjustment 6.2 Sound Effect MENU [] Sound Sound Effect ENTER [ ] z If Speaker Select is set to External , Sound Effect is disabled. z Available only when Sound Mode is set to Standar d . z SRS TruSurround HD ( Off / On ) This funct ion provides a virtual 5.1 cha nnel surround sound expe rience through a pair of sp eak[...]

116 Sound Adjustment 6 6 Sound Adjustment 6.3 Broadcast Audio Options MENU [] Sound Broadcast Audio Options ENTER [ ] z Preferred Langu age (digital channels only) Use the up and down arrow keys to select a language, an d then press [ ]. Digital-TV broadc asts can simultan eously transmit many audio tracks (for example, simultan eous translations o[...]

117 Sound Adjustment 6 6 Sound Adjustment 6.4 Speaker Settings MENU [] Sound Speaker Settings ENTER [ ] z Speaker Select ( External / Internal ) If you are listen ing to the sou nd track of a broadcast o r movie through an external receiver, you may hear a sound e cho caused by the differenc e in decoding sp eed between the TV’s speaker s and the[...]

118 7 Media 7 Media 7.1 Favorites MENU [] Media Favorites ENTER [ ] View all of your favorite chan nels. Your favorite cha nnels are organized in u p to five groups ( Favorites 1 - 5 ). If you want to chan ge from one favorite g roup to an other, follow t hese steps. 1 Move the cur sor to the g roup name disp layed on the t op of the sc reen, and t[...]

119 Media 7 7 Media 7.1.1 Functions on the Favorites Screen To access the func tions listed belo w, use the arrow b uttons to move the cursor to the icon of you r choice on the top right corner of the screen , and then p ress [ ]. z View Mod e : Toggles betwee n the Text view and Thumb nail view of your favorite chann els. Thumbnail view d isplays [...]

120 Media 7 7 Media 7.2 Channel MENU [] Media Channel ENTER [ ] Using the Channel function, you can add channe ls, delete Adde d channels, set Favorite ch annels, use the program guide for digital broad casts and chan ge between the All Channel s and Added Ch. screen. You can also ch ange the ant enna or chan nel settings by se lecting the ic ons i[...]

121 Media 7 7 Media Using Edit Mode to Delete a Channel from the Channel List 1 Select the Edit Mode icon on the upper right of you r screen, and then press the [ ] button. 2 Select Delete a t the bottom of your scr een, and the n press [ ]. A pop-up ap pears asking if you want to delete the item. 3 P r e s s t h e /// b u t t o n s t o s e l e c t[...]

122 Media 7 7 Media z Delete only appears if you have selected an added channel on the Added Ch. or All Channels list. z You can also delete a channel on the All Channels list. Added channels are bright. D eleted channels are dim. To delete an Added channel on the All Channels list, select a bright channel, press the TOOLS button, select Delete , p[...]

123 Media 7 7 Media 7.2.2 Antenna MENU [] Media Channel Antenna ENTER [ ] Your TV memo rizes channels and adds the me morized chan nels to the Channel . Before yo ur TV can memorize chann els, you must spe cify the signal source, either Air or Cable . If you select cable, when you start Auto Program , you must al so specify the cable system type, S[...]

124 Media 7 7 Media 7.2.4 Clear Scrambled Channel MENU [] Media Channel Clear Scrambled Channel ENTER [ ] This function filters out scra mbled channels after Auto Program is completed. This process may take up to 20~30 minutes. How to Stop the Clear Scrambled Channels func tion 1 Press the [ ] button to select Stop . 2 Press the [ ] bu tton to sele[...]

125 Media 7 7 Media 7.3 MagicInfo Lite MENU [] Media Magi cInfo Lite ENTER [ ] Press the MagicInfo Lite button on the remote contro l. MagicInfo Li te Player allow s you to play content (ima ge, video, do cument files) at a desired time . You can play conte nt saved in inte rnal memory or USB memory. You c an also play co ntent via Mag icInfo Lite [...]

126 Media 7 7 Media Supported Video Subitle Formats (for language subtiles, etc.) Supported Video Formats Name File extension F ormat MPEG-4 time-based text .ttxt XML SAMI smi HTML SubRip .srt string-base d SubViewer .sub string-based Micro DVD .sub or .tx t str ing-based File Extension Cont ainer Video Codec Resolution Frame ra te (fps) Bit rate ([...]

127 Media 7 7 Media z Video content will not play, or not play correctly, if there is an error in the content or the container. z Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. z If the Index Table is in error, the Seek (Jump) function is not supported. z You [...]

128 Media 7 7 Media Using the Play Continuously Function (Resume Play) If you exit a mo vie when it is playin g, you can p lay the movie lat er from the point where you stopped it. The Resume function does not support multiple users. (It will only memorize the point where the most recent user stopped playing.) 1 Select the movie file you stoppe d a[...]

129 Media 7 7 Media 7.5 Photos MENU [] Media Photos ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e product. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears. Select a connected devi[...]

130 Media 7 7 Media 7.6 Music MENU [] Media Music ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e product. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears. Select a connected devic [...]

131 Media 7 7 Media Playing My Playlist Select the My Playlist fol der and it will play au tomatically. Press the or button to play a different music file within th e play list. To delete a file from My Playlist , select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ]. The file will be del[...]

132 Media 7 7 Media 7.7 Videos / Photos / Music - Additional Functions 7.7.1 Sorting the file lists To sort files in the file lists, select the ( Sorting ) icon in the top right of the screen by using the / / / button. Then, press the [ ] button. The checks below indicate which media the sort criteria apply to. Sort Criteria Operation Videos Photos[...]

133 Media 7 7 Media 7.7.2 Videos / Photos / Music Play Option menu When playing video or phot o files, you can press t he TOOLS button to display an Opti ons menu. Below are a se ries of tables listing the options ava ilable and th e media each option applies to . Option Name Ope rations Videos Photos Music List Return to the file list. Play / Paus[...]

134 Media 7 7 Media z Pressing the INFO button while a device name is selected will display information about the selected device. z Pressing the INFO button while a file is selected w ill display information about the selected file. Start Slide Show / Stop Slide Show You can start or stop a slide sho w. Alternatively, use the or bu tton on the rem[...]

135 Media 7 7 Media 7.8 Source MENU [] Media Source ENTER [ ] Source allows you to select a variety of sources an d change sour ce device names. 7.8.1 Source You can display the screen of a source device connected t o the product . Select a source from Source List to display the screen of the sele cted source. The input source can also be changed b[...]

136 Media 7 7 Media 7.8.2 Edit Name MENU [] Media Source TOOLS Edit Name ENTER [ ] You can rena me a connec ted source d evice. z Sometimes the scr een will not di splay properly unle ss the name of a so urce device is spe cified in Edit Name . In addit ion, it is be st to rename the source d evice in Ed it Name to obtain optimal pictu re quality. [...]

137 Media 7 7 Media 7.9 AllShare MENU [] Media AllShare ENTER [ ] AllShare connects you r TV and com patible Samsun g mobile pho nes/ devices through a n etwork. You can play med ia contents inclu ding videos, pho tos, and music sa ved on your mobile phones o r the other devices (such a s your PC) by cont rolling them on the TV via the network. z F[...]

138 8 Network 8 Network 8.1 Network Setting 8.1.1 Connecting to a Wired Network There are t hree ways to a ttach your pro duct to your LAN using cab le. z You can at tach your pro duct to your L AN by connecti ng the LAN port on the back of your product to an external mod em using a LAN ca ble. See the diagram below. z You can at tach your pro duct[...]

139 Network 8 8 Network access the Inte rnet so you do not have t o enter them manually. Mo st home netw orks are Dynami c Networks. Some networks requ ire a Static IP address. If your network requir es a Static IP address, you must enter the IP address, subn et mask, gat eway, and DNS value s manually on yo ur product Ca ble Setup Screen w hen you[...]

140 Network 8 8 Network Automatic Network Settings Use the Automatic Network Se ttings when connecti ng your product to a network th at supports DHCP. To set up yo ur product ca ble network c onnection au tomatically, fo llow these step s. How to set up automat ically 1 Go to the Network Settings screen. 2 Select Wired , press [ ], and then press [[...]

141 Network 8 8 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 When done en tering the IP A ddress , press [ ]. 10 Press the down arrow key to go to the Subnet Mask fields, and then press [ ]. 11 Repeat the same entry [...]

142 Network 8 8 Network 8.1.3 Connecting to a Wireless Network To connect yo ur product to your networ k wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2 , WIS10ABGN-sold s eparately) , which you connect to your product back or side panel USB po rt. See the illustration below. Samsung’s Wire [...]

143 Network 8 8 Network  WPS (PBC)  One Foot Connection z The product may not recognize the Samsung Wireless LAN adapter if you connect it to the product with a USB hub or USB extension cable ot her than the cable supplied with the product. 8.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an op tional securit[...]

144 Network 8 8 Network Manual Network Setup Use the Manual Network Se ttings when connectin g your product to a net work that requires a Stat ic IP address or if th e automatic co nnection process has failed. Getting the Netw ork Connectio n Values To view the Ne twork connection values on most Windo ws computers, follow these steps. 1 Right click[...]

145 Network 8 8 Network 13 Repeat the entry p rocess for each field in the IP Address . If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time. 14 When done en tering the IP A ddress , press [ ]. 15 Press the button to go to the Subnet Mask fields, an[...]

146 Network 8 8 Network 8.1.6 One Foot Connection Network Setup The On e Foot Connec tion func tion lets you connect you r Samsung product a utomatically to a Samsung wireless routers. If your wi reless router does not support One Foot Connection , you must connect using one of the other meth ods. You can check for equipment that supports One Foot [...]

147 Network 8 8 Network 8.1.7 Ad Hoc Network Setup You can conn ect to a mobile device supporting Ad-hoc con nections without a wireless rou ter or AP through the product. When connected to a mobile d evice, you can use files on th e device or con nect to the Internet using the AllShare or M ultimedia fu nction. How to set up using Ad hoc 1 Go to N[...]

148 Network 8 8 Network 8.2 Network Status MENU [] Network Network Status ENTER [ ] You can chec k the current network and Internet s tatus. 8.3 AllShare Settings MENU [] Network AllShare Settings ENTER [ ] Selects whether to u se media func tions on the networ k. For details on set up options, re fer to the AllShare ™ instructions. Media ( On / [...]

149 Network 8 8 Network 8.3.1 Media Shows a list o f mobile phones o r connected devices whic h have been set up to use the Media function with this product . The Media function is available in all devices which support DLNA DMC. z Allowed / Denied : Allows/Blocks the devices. z Delete : Deletes th e devices fro m the list. This function only delet[...]

150 Network 8 8 Network 8.4 MagicInfo Lite Settings MENU [] Network MagicInfo Lite Settings ENTER [ ] 1 Server z Setting the Mag icInfo Lite Server IP  Enter the serv er IP address a nd port numb er. Use 7001 as the port number. If unable to connect to the server using port number 7001, check with your server administrator to find the correct po[...]

151 9 System 9 System 9.1 Plug & Play MENU [] System Plug & Play EN TER [ ] When the product is initially powered on, a sequence of on-scr een prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the In put Source is s et to TV . 1 Selecting a language Press the or bu tton, then p[...]

152 System 9 9 System 9.2 Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 9.2.1 Configuring settin gs for Multi Control z MDC Connection Select a method to connect to MDC to receive the M DC signal.  RS232C MDC Communicate with MDC via the RS232C-stereo cabl e.  RJ45 MDC Communicate with MDC via t[...]

153 System 9 9 System 9.3 Time MENU [] System Ti me ENTER [ ] You can configu re Clock Set or Sleep Timer . You can also set the product to automatically turn on or off at a specified time using the Timer function. 9.3.1 Clock Set the cloc k to use the v arious various t imer featur es of the produ ct. If you disconnect the power cord, you have to [...]

154 System 9 9 System 9.3.2 Sleep Timer Automatically shut s off the prod uct after a preset period of time . ( 30 min , 60 min , 90 min , 120 min , 150 min and 180 min ). Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer , select Off . 9.3.3 On Timer Set On Timer so that you r product turns on autom a[...]

155 System 9 9 System 9.3.4 Off Timer You can set up three separ ate Off Timer configurations. ( Off Timer 1 , Off Timer 2 , Off Timer 3 ) You must set the clock before you can use Off Timer . z Setup : Select Off , Once , Everyday , Mon~F ri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want Off Timer to turn o[...]

156 System 9 9 System 9.4 Menu Language MENU [] System Menu Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 9.5 Eco Solution MENU [] System Eco Solution ENTER [ ] 9.5.1 Energy Saving Save power with th e Energy Saving [...]

157 System 9 9 System 9.5.2 Eco Sensor (Off / On) To enhance your power savings , the picture sett ings will automatically a dapt to the ligh t in the room. If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off . z Min. Backlight : When Eco sensor is On , you can manually adjust the minimum scree n brightness. If Eco Sensor is [...]

158 System 9 9 System 9.6 Caption MENU [] System Caption ENTER [ ] (On-Screen Text Messages) 9.6.1 Caption You can switch the capt ion function on or off. If captions are not available, th ey will not be displayed on the screen . z Off / On The Caption feature does not work with devices connected to the product through the Component, HDMI or PC inp[...]

159 System 9 9 System 9.6.3 Digital Caption Options (digital chan nels only) Adjusts the e ach option. Whe n done, select Cl ose . z Size : Options inc lude Default, Small, Standar d and Larg e. The defau lt is Standard. z Font Styl e : Options includ e Default and Styles 0 to 7. The default is Style 0 . z Foreground Color : You can change t he col[...]

160 System 9 9 System 9.7 Security MENU [] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". Th e PIN screen closes an d the Security menu ap pears. 9.7.1 Safety Lock (Off / On) It sets safe lock function. All the menus a nd buttons of t he product and [...]

161 System 9 9 System 9.7.3 Program Rating Lock (Off / On) When turn ed on, the Program Rati ng Lock feature ca n automatically blo ck programs that you deem inappropriate for your child ren. You must enter a PIN (personal ident ification number) before you c an set or change an y of the Program Rating Loc k restrictions. z Program Rating Lock is n[...]

162 System 9 9 System z Canadian E nglish Rati ng : You can b lock TV pro grams based on their Anglop hone Canadia n rating. Canadian English Rating displays a column with locks and th e following ratings categories. C : Programmin g intended for children un der age 8. / C8+ : Progra mming generally co nsidered acceptable for children 8 years and o[...]

163 System 9 9 System 9.7.4 Change PIN The Change PIN screen will appear. Choose any 4 digi ts for your PIN and enter it in Enter New PIN . Re- enter the same 4 digits in Confirm N ew PIN . When the Confirm screen disap pears, press the Close button. The product has m emorized your new PIN. 9.8 PIP MENU [] System PIP ENTER [ ] z If you have set Dou[...]

164 System 9 9 System This option is enabled if the secondary display is set to TV .  Size ( , , , , ): Select a size f or the subpictur e.  Position ( , , , ): Select a p osition for the sub-picture. In Double ( , , ) mode, you cannot select Position .  Sound Select ( Main / Sub ): You ca n choose to listen to th e sound from the Main pic[...]

165 System 9 9 System 9.10 Screen Burn Protection MENU [] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn pr evention technolog y. Pixel Shift moves th e picture slightly on the scre en. The Pixel Shift Time setting allows yo u to program th e time betwee n movemen[...]

166 System 9 9 System 9.10.2 Timer You can set th e timer for Screen Burn Protection . If you start the operation to e rase any re sidual image, th e operation will be performe d for the set period of time and then a utomatically finish. z Mode : You can chan ge the Safet y Screen Type. z Period : Use this functio n to set the e xecution pe riod fo[...]

167 System 9 9 System 9.11 Video Wall MENU [] System Video Wall ENTER [ ] Customize the layout of multip le displays that are connect ed to form a video wall. In addition, disp lay part of a whole pic ture or rep eat the same picture on e ach of the co nnected mu ltiple displays. To display multiple imag es, refer to MDC Help or th e MagicInfo u se[...]

168 System 9 9 System 9.11.2 Format Select a format to display im ages on multiple displays. z Full : Display images in full screen. z Natural : Display images at the original resolut ion without enlarging or reducing. The Format option is only enabled when Video Wall is set to On . 9.11.3 Horizontal This function auto matically divides the screen [...]

169 System 9 9 System 9.11.5 Screen Position You can custo mize the arrang ement of split s creens by mo ving displays ident ified with a nu mber using the Screen Position function. Select Screen Position to display the arrangement of displays (identified with a number ) specified according to t he Horizontal or Vert ical settings. To c ustomize th[...]

170 System 9 9 System 9.12 Source AutoSwitch Settings MENU [] System Source AutoSwitch Settings ENTER [ ] Turning on the di splay with Source AutoSwitch On , and the previous video source selection is no t active, the display will automatica lly search th e different video input so urces for active video. z Source AutoSwitch When the Source AutoSwi[...]

171 System 9 9 System 9.13 General MENU [] System General ENTER [ ] 9.13.1 Max. Power Saving Turns off the p roduct to redu ce power con sumption after the PC has been le ft idle for a spe cified period of time. Available only PC mode. 9.13.2 Game Mode When connec ting to a gam e console suc h as PlayStatio n™ or Xbox™, you can enjoy a more rea[...]

172 System 9 9 System 9.13.3 BD Wise Provides the optim al picture quality f or Samsung DVD, Blu-ray and Home Theater prod ucts which support BD Wise . When BD Wise is turned On , the picture mo de is automat ically changed t o the optimal resolution. Available when you connect Samsung products that support BD Wise through an HDMI cable to the TV. [...]

173 System 9 9 System 9.13.8 Power On Adjustment You can set the warm -up time for the screen to turn on after the pow er button is presse d. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 9.13.9 Temperature Control This function d etects the inter nal temperatu re of the pro duct. You can spec[...]

174 System 9 9 System 9.14 Anynet+(HDMI-CEC) MENU [] System Anynet+(HDMI-CEC) ENTER [ ] 9.14.1 Anynet+(HDMI-CEC) What is Anynet+? Anynet+ is a function that enable s you to control all connec ted Samsung device s that support Anynet+ with your Samsung product remot e. The Anynet+ system can be used only with Samsung devices that have the Anynet+ fe[...]

175 System 9 9 System Anynet+ Menu The Anynet+ me nu changes d epending on the type and status of the Anynet+ devices con nected to the product. 9.14.2 Auto Turn Off (No / Yes) Setting an Anynet+ Device to t urn Off automatica lly when the p roduct is turned o ff. z If Aut o Turn Off is set to Yes , running external devices will turn off at the sam[...]

176 System 9 9 System Troubleshoo ting for Anynet+ Problem Possible Solution Anynet+ does not w ork. z Check if the device is an An ynet+ device. The Anynet+ system supports Anynet+ devices only. z You can co nnect only one receiver (home theater). z Check if the Anyn et+ device power cord is proper ly connected. z Check the Anynet+ devi ce’s Vid[...]

177 System 9 9 System 9.15 DivX® Video On Demand MENU [] System DivX® Video On Demand ENTER [ ] Shows the reg istration code authorized for the product . If you conne ct to the Div X web site and register using that co de, you can do wnload the VOD registration file. For more information about DivX® VOD, visit “http://vod.divx.com”. The Anyn[...]

178 System 9 9 System 9.16 Network Remote Control MENU [] System Network Remote Control ENTER [ ] Turn on/off or give permission to Samsung mobile phone d evices to conn ect with and con trol the product. You must have a Samsung Mo bile phone/device w hich supports Wireless Remote Control. Fo r more details, refe r to each de vice’s manual. 9.17 [...]

179 10 Support 10 Support 10.1 Software Upgrade MENU [] Support Software Upgrade ENTER [ ] The Software Upgrade menu lets you upg rade your TV’s softw are to the latest version. z Current Version : This is the software versio n already installed in the TV. Be careful not to turn off the power until the upgrade is complet e. The TV will turn off a[...]

180 Support 10 10 Support 10.1.2 Alternative Software z Alternative Softw are The Alte rnative Sof tware option lets you upgrad e using a file the T V downloaded ea rlier, but you decided not to install immediately, or a file downloaded by the TV in Stan dby Mode. To upgrade By Alt ernative Softwar e , follow these steps. 1 If upgrade software has [...]

181 11 MagicInfo Lite 11 MagicInfo Lite 11.1 File Formats Compatible with MagicInfo Lite Player 11.1.1 Video / Audio [Read before usin g MagicInfo Lite Player ] z Supported USB-device file systems include FAT16 and FAT32 . (NTFS is not supported.) z A file with a vertical and horizontal reso lution larger than t he maximum resolution cannot be play[...]

182 MagicInfo Lite 11 11 MagicInfo Lite *.mp4 MP4 H.264 BP / M P / HP 1920x1080 6 ~ 30 25 MP3 / ADPCM / AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 XVID 1920x1080 6 ~ 30 8 *.3gp 3GPP H.264 BP / M P / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE-AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.vro VRO VOB MPEG1 352x288 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920x1080 [...]

183 MagicInfo Lite 11 11 MagicInfo Lite Audio z Audio content witho ut video is not supported. (Only mp3 files a re supported as bac kground music for im age/PPT slides hows. This feature is available only when using the netw ork schedule me nu.) z Audio content with a Bit rate or Frame ra te larger tha n the rate sp ecified in the ta ble above ca [...]

184 MagicInfo Lite 11 11 MagicInfo Lite Power Point z Compatible docume nt file format s  Extension : ppt, pptx  Version : Office 97 ~ Office 2007 z Functions not supported  Animation effect  3D shapes (which wil l be displayed in 2D)  Header and footer (some subitems ar e not supporte d)  Word Art  Align (A group a lignment er[...]

185 MagicInfo Lite 11 11 MagicInfo Lite 11.2 Network Schedule 11.2.1 Connecting to a server Network setup To run Ma gicInfo Li te , connec t to a network . Refer to 138 page for details about the Networ k Settings menu. Server setup Go to MENU Network MagicInfo Lite Settings Server . Next, enter the server information. (E.g.: http ://192.168.0.10:7[...]

186 MagicInfo Lite 11 11 MagicInfo Lite 11.2.2 MagicInfo Lite Settings MENU [ ] Media MagicInfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the server is connected (app roval) in the MagicInfo Li te menu screen . To view whether the server is connect ed when a ne twork schedule is running, pre ss INFO[...]

187 MagicInfo Lite 11 11 MagicInfo Lite 3 Select Device fr om the top menu bar. 4 Select Lite Device from the menus on the left. 5 Select View Unapproved Lite De vice from the sub -menus of Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedu[...]

188 MagicInfo Lite 11 11 MagicInfo Lite 7 Enter the in formation re quired to appr ove the device. z Device Na me : Enter the device na me. z Device Model Name : Select your device model. z Device Gr oup : Sele ct to specify the gro up. z Location : Enter the curren t location of t he device. 8 Select the View All Lite Device m enu to chec k that t[...]

189 MagicInfo Lite 11 11 MagicInfo Lite 11.2.4 Setting the current time A schedule m ay not run if the time set o n the device is d ifferent from the server' s current tim e. 1 Go to the tabs Device Time . 2 Select your de vice. 3 Select Clock Set , and sync the time with the serve r. For further details on how to manage the time (scheduling, [...]

190 MagicInfo Lite 11 11 MagicInfo Lite 11.3 Local Schedule Run a schedule cr eated by Local Schedule Manager . Go to Local Schedule Manager Sele ct the conte nt you want t o run This menu is disabled if no schedule was created by Local Schedule Manager . 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Run a schedule cr eated [...]

191 MagicInfo Lite 11 11 MagicInfo Lite 2 Select Create in the Local Schedule Manager scre en. 3 Select Time to set the tim e you want t o play conten t. 4 Select Contents to specify the content you want to play. 5 Select Save . Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete Run Info Close Create T ime Content[...]

192 MagicInfo Lite 11 11 MagicInfo Lite 6 Select the memory space you wan t to save the co ntent to. 7 Check that the schedule has be en added to t he Local Schedule M anager. Create T ime Conten T ime Conten 12:00 am ~ 02:00 pm Delete Save ancel Where do you want to save? Internal USB Cancel Local Schedule Manager Storage Internal Memory No Playin[...]

193 MagicInfo Lite 11 11 MagicInfo Lite 11.4.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to m odify. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Cl[...]

194 MagicInfo Lite 11 11 MagicInfo Lite 3 Select Edit . 4 Change the d etails of the lo cal schedule . Next, select Save . 11.4.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. Edit T ime Contents T ime Contents 12:00 am ~ 02:00 pm Menu1.jpg --:-- am ~ [...]

195 MagicInfo Lite 11 11 MagicInfo Lite 2 Select the local schedule you want to d elete. 3 Select Delete . Local Schedule Manager Storage Internal Memory No Playing Schedule 201 10101_1200.Isch Create Edit Delete Run Info Close Local Schedule Manager Storage Internal Memory Do you want to delete schedule? 201 Create Edit elete Run Info Close Ye s N[...]

196 MagicInfo Lite 11 11 MagicInfo Lite 11.4.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run. Next, sele ct Run . Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay [...]

197 MagicInfo Lite 11 11 MagicInfo Lite 11.4.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select Stop . Network Schedule Local Schedule ・ Local Schedule[...]

198 MagicInfo Lite 11 11 MagicInfo Lite 11.4.6 Viewing the detail s of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the loca l schedule you want to view the detail s of. 3 The details of the sc hedule will be displaye d. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Inte[...]

199 MagicInfo Lite 11 11 MagicInfo Lite 11.5 Contents Manager 11.5.1 Copying content 1 Select Contents Manager in the MagicInfo Lite menu screen. 2 Select the cont ent you want to copy. z If content under Internal Memory is selected : You can c opy the con tent under Internal Memory to USB memory . z If content under USB is selected : You can copy [...]

200 MagicInfo Lite 11 11 MagicInfo Lite 11.5.2 Deleting content 1 Select Contents Manager in the MagicInfo Lite menu screen. 2 Select the conten t you want to d elete. z Content un der Internal Memory and US B memory can be deleted at the same time . 3 Select Delete . Network Schedule Local Schedule · Local Schedule Manager Contents Manager Intern[...]

201 MagicInfo Lite 11 11 MagicInfo Lite 11.6 Internal AutoPlay 11.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite menu screen. z Play content, which has been copied to Internal Memory , in alphabetical ord er. 11.7 USB AutoPlay 11.7.1 Running Internal Aut[...]

202 MagicInfo Lite 11 11 MagicInfo Lite z USB AutoPlay wi ll automatically run if US B memory is connect ed when Network Sc hedule or Local Schedule is running. 11.8 When Content is Running 11.8.1 Viewing the details of the content that is running Press the INFO button on the remote control. 1 Software Versio n : Displays the software version o f a[...]

203 MagicInfo Lite 11 11 MagicInfo Lite 7 Schedule Download : Displays the progress of a network sche dule being do wnloaded fro m the server 11.8.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control. You can chan ge the Picture Mode or Sound Mode setting or safely remove a USB device ( Safely Remove[...]

204 12 Troubleshooting Guide 12 Troubleshooting Guide 12.1 Requirements Before Co ntacting Samsung Customer Service Center 12.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by using [...]

205 Troubleshooting Guide 12 12 Troubleshooting Guide 12.1.3 Check the followings. Installation issue (PC mode ) The screen keeps switch ing on and off. Check th e cable conn ection betwee n the product and PC, and ensu re the conne ction is secure. ("2.2Connecting and Using a PC") Blank spaces are fou n d at the top a n d bottom of the s[...]

206 Troubleshooting Guide 12 12 Troubleshooting Guide The screen is not clear. T he screen is blurry. Adju st Coarse and Fine . Remove any accessories (vid eo extension cable, etc) an d try again . Set the resolution and frequency to the recommended level. The screen ap pears unstab le and shaky. Check that the resolut ion and frequ ency of the PC [...]

207 Troubleshooting Guide 12 12 Troubleshooting Guide Remote control issue The remote con trol does not wor k. Make sure that the batteries are correctly in place (+/ -). Check if the ba tteries are flat . Check for po wer failure. Make sure th at the power cord is co nnected. Check for any special lighting o r neon signs switched on in the vici ni[...]

208 Troubleshooting Guide 12 12 Troubleshooting Guide 12.2 Q & A Question Answ er How can I change the frequency? Set the frequ ency on your graphics card . z "Windows XP": Go to Control Panel Appearance an d Themes Display Settings Advanced Monitor and adjust the fr equency in Monitor Settings . z "Windows ME/ 2000": Go to [...]

209 Troubleshooting Guide 12 12 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution? z "Windows XP": Go to Control Panel Appearan ce and Themes Display Settings and adjust the resolution. z "Windows ME/2000" : Go to Control Panel Di [...]

210 13 Specifications 13 Specifications 13.1 General Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if de sire[...]

211 Specifications 13 13 Specifications 13.2 PowerSaver The power-sa ving function of this produ ct reduces p ower consum ption by switch ing off the scree n and changing the co lor of the power LED if the produc t is not used for a specified period of time. The p ower is not turned off in powe r-saving mode. To swit ch the screen back on , press a[...]

212 Specifications 13 13 Specifications 13.3 Preset Timing Modes z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the opti[...]

213 Specifications 13 13 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. Vertical Frequency The product displays a single image m[...]

214 Specifications 13 13 Specifications 13.4 License TheaterSound HD, SRS and symbo l are trademarks of SRS Labs, Inc. TheaterSound HD technology is inco rporated under license form SRS Lab, Inc. Manufactur ed under license from Dolby Laboratories. Dolby and the doubl e - D symbol are trademarks of Dolby La boratories. Manufactured un der license u[...]

215 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (7 26-7864) http ://www.samsung .com/ca http://www. samsung.com /ca_fr (French) MEXICO 01-800-[...]

216 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality z To enjoy the op timum picture q uality, go to Cont rol Panel on your PC and adjust the resolution and refresh rate as follows. Th e picture quality of TFT- LEDs may degrade if the optimum resolutio n is not selected.  Resolution: 1920 X 1080[...]

217 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn-in should not occu r when th e LCD panel is operating no rmally. Norma l operation refers to a continuously chan ging video patter n. If the LCD panel displa ys a fixed pattern for an extended period of time (more than 1 2 hours), a slig ht voltage[...]

218 Appendix Appendix z Powering Off, Screen Save r and Power Saving Mode  Power off th e product for 2 hours after using it for 12 hours.  Go to Display Prop erties > Power Supp ly on your PC and se t the product to power of f as required.  Using a s creen saver is r ecommended . It is best to use a single-color or m oving-image screen[...]

219 Appendix Appendix Terminology Dot Pitch The product and screen c onsist of re d, green and blue dots. A shorter distan ce between t he dots produces a hig her resolution. Do t pitch refer s to the distance be tween the short est distance betw een dots of the same color. Dot pi tch is measured in millimeters. Vertical Frequency The product disp [...]

220 Appendix Appendix Multiple Display Control (MDC) MDC (Multiple Disp lay Control) is an app lication that allows multiple display devices to be co ntrolled simultaneously using a PC. Communica tion between a PC and monitor take s place using RS2 32C (serial data transmissio n) and RJ45 (LAN) cables. DVD(Digital Versatile Disc) DVD refers to a CD[...]

Index 221 Index A Antenna 60 Anynet+(HDMI-CEC) 174 B Batteries 30 C Caption 158 Change PIN 163 Clock Mode 153 Custom settings screen 104 E Eco Solution 156 Edit Name 136 Energy Saving 156 F Favorites 118 G Game Mode 171 I Items sold separately 24 M MagicInfo Lit e 125 MagicInfo Lite Settings 150 MDC InstallationUninstallation 69 Menu Langua ge 156 [...]