Samsung S22A650D manual

User Manual SyncMaster S22A650D S24A650D S27A650D S24A850DW The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance. BN46-00081A-06[...]

2 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change with out notice to improve qua lity. © 2011 Samsung Electronics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronic s i[...]

3 Before Using the Product Before Using the Product Activities marked by this symbol are p rohibited. Instructions marked by th is symbol must be followed.[...]

4 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as th e panel and exte rior of advanced LCDs are easily scr atched. Take the following steps when c leaning. 1. Power off the monitor and computer. 2. Disconnect the power c ord from the monitor. Hold the power cable by the plug and do not touch the ca[...]

5 Before Using the Product Before Using the Product Securing the Installation Space  Ensure some sp ace around the product for ventilation. A rise in th e internal tempe rature may cau se a fire and dam age the pr oduct. Be sure t o allow the amount of spac e as shown below or great er when install ing the product. The exterior may differ depend[...]

6 Before Using the Product Before Using the Product Warning Do not use a damaged p ower cord o r plug, or a loose powe r socket.  An electric shock or fire may re sult. Do not plug many prod ucts into the sam e power socket .  Otherwis e, the socket may overheat and cause a fire. Do not touc h the power p lug with wet ha nds.  Otherwis e, [...]

7 Before Using the Product Before Using the Product Caution Installation Warning Do not unplug the power cord when the prod uct is in use.  The product may become damage d by an electric sho ck. Do not use the po wer cord for prod ucts other than a uthorized produc ts supplied by Samsung.  An electric shock or fire may re sult. Keep the po we[...]

8 Before Using the Product Before Using the Product Caution Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surfa ce, etc.).  The product m ay fall and break o r cause a pers onal injury.  Using the produ ct in an area w ith excess vibration m ay damage the product or cause a fire. Do not install th e[...]

9 Before Using the Product Before Using the Product Operation Warning Put down the p roduct carefully.  The product m ay fall and break o r cause a pers onal injury. Installing the product in an unusual place (a place expose d to a lot of fine particles, chemical sub stances or extreme tempe ratures, or an airport or train station whe re the pro[...]

10 Before Using the Product Before Using the Product During a light ning or thunde rstorm, power o ff the product and remove the po wer cable.  An electric shock or fire may re sult. Do not drop objects on the pr oduct or apply impact.  An electric shock or fire may re sult. Do not move the pr oduct by pulli ng the powe r cord or any cable . [...]

11 Before Using the Product Before Using the Product Caution Do not insert a metallic object (a chopstick, coin , hair pin, etc.) o r inflammable object (p aper, match, e tc.) into the v ent or ports of the pr oduct.  If water or an y foreign substan ce enters t he product, be sure to power off the product, rem ove the pow er cord, an d contact [...]

12 Before Using the Product Before Using the Product Do not let water en ter the DC powe r device or get th e device wet.  An electric shock or fire may re sult.  Avoid using the product ou tdoors wher e it can be ex posed to rain or snow.  Be careful no t to get the DC p ower adapter wet when you w ash the floor. Do not put the DC power a[...]

13 Before Using the Product Before Using the Product Correct posture to use the product Exercise caut ion when ad justing the prod uct angle o r stand height.  Otherwis e, children' s fingers or ha nds may beco me stuck and in jured.  Tilting th e product e xcessively may cau se it to fa ll and result in personal injury. Do not place hea[...]

Table Of Cont ents 14 Table Of Contents BEFORE USING THE PRODUCT 2 Copyright 2 Icons used in this manual 2 Symbols for safety precautions 4 Cleaning 4 Cleaning 5 Securing the Installation Space 5 Precautions for storage 5 Safety Precautions 5 Electricity and Safety 7 Installation 9O p e r a t i o n 13 Correct posture to use the product PREPARATIONS[...]

Table Of Contents Table Of Cont ents 15 31 Connecting and Using a PC 31 Connecting to a PC 33 Driver Installation 34 Setting Optimum Resolution 35 Changing the Resolution Using a PC 38 Connecting Headphon es (for the SA850 Model Only) 39 Connecting the Product to a PC as a USB HUB (for the SA850 Model Only) 39 Connecting a PC to the Product 39 Util[...]

Table Of Contents Table Of Cont ents 16 50 Green 50 Configuring Green 51 Blue 51 Configuring Blue 52 Color Tone 52 Configuring the Color Tone Settings 53 Gamma 53 Configuring Gamma RESIZING OR RELOCATING THE SCREEN 54 Image Size 54 Changing the Picture Size 55 H-Position & V-Position 55 Configuring H-Position or V-Position 56 Menu H-Position &a[...]

Table Of Contents Table Of Cont ents 17 69 Display Time 69 Configuring Display Time 70 Key Repeat Time 70 Configuring Key Repeat Time 71 Customized Key 71 Configuring Customized Key 72 Off Timer On/Off 72 Configuring Off Timer On/Off 73 Off Timer Setting 73 Configuring Off Timer Setting 74 Reset 74 Initializing Settings ( Reset ) INFORMATION MENU A[...]

Table Of Contents Table Of Cont ents 18 92 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 93 Terminology INDEX[...]

19 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not to dam age the product whe n you open the packa ging with a sharp instrum ent. 2 Remove the Styr ofoam from the produc t. 3 Check the com ponents and remove the Styrofoam and plastic bag.  The appearance of actual com[...]

20 Preparations 1 1 Preparations 1.1.2 Checking the Components  Contact the dealer from whom you purch ased the product if any item is missing.  The appearance of the components and items sold separately may differ from the image shown. Components Components may differ in different locations. Items sold separately The following items can be p[...]

21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description  Open or cl ose the onscr een displa y (OSD) menu , or retu rn to th e last menu.  OSD control loc k: Maintain the current s etti[...]

22 Preparations 1 1 Preparations Icons Description Configure Customized Key and press [ ]. The following options will be enabled. ECO - MAGIC - Image Size To configure Customized Key , go to SETUP&RE SET Customized Key and select the mode you want. Move to the upp er or lower men u or adjust the valu e for an option on th e OSD menu. Adjust the[...]

23 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. SA650 SA850 DC 14V DP IN DVI IN RGB IN[...]

24 Preparations 1 1 Preparations Port Descriptio n Connects to the DC power ad apter . Connects to a PC via a DP cable. Connects to a PC via a DVI cable. Connects to a PC using the D-SUB cable. Connects to the ster eo cable Connects to an aud io output device such as hea dphones. Connect to a USB device. Co mpatible with a USB cable versio n 3.0 or[...]

25 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a protective clo th or cushion on a f lat surfac e. Next, place th e product w ith the fa ce down on top of the cloth or cushion. Insert[...]

26 Preparations 1 1 Preparations 1.3.2 Adjusting the Prod uct Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.  To adjust the height, remove the fixing pin.  The monitor tilt and height can be adjusted.  Hold the top center of the product and[...]

27 Preparations 1 1 Preparations 1.3.4 Installing a Wall-moun t Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Align the grooves and tightly fasten the sc rews on the brack et on the prod uct with the corre sponding parts on the wall-mount kit or desktop stand you want t o attach. Pl[...]

28 Preparations 1 1 Preparations Notes  Using a screw longer than the standard length can damage the internal components of the product.  The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications.  Do not use screws that do not comply with the VESA standards. Do not[...]

29 Preparations 1 1 Preparations 1.4 "MagicRotation Auto" The "MagicRotation Auto" fun ction detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accord ingly. [Software Installa tion] 1 Insert the user ma nual CD provided wi th the prod uct into the CD-ROM dri ve. 2 Follow the i[...]

30 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting 2.1.1 Pre-connection Checkpoints  Before connectin g a source devic e, read the user manual pro vided with it. The number and locations of ports on source device s may differ from device to dev ice.  Do not connec t the power cable until al[...]

31 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC  Select a connection m ethod suitab le for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (analogue type) 1 Connect th e D-SUB cable to the [RGB IN] port on the bac[...]

32 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device  Audio is not available if the PC and pr oduct are connected via the [DVI] port.  Refer to "2.3 Connecting Headphones (for the SA850 Model Only)" for details on how to enable sound. Connection Using the HDMI-DVI Cable 1 Connect the DVI cab le to the [D[...]

33 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Driver Installation  You can set the optimum resolution and frequency for this product by installing the corresponding drivers for this product.  An installation driver is contained on the CD supplied with the product.  If the file provided is faulty, v[...]

34 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and chan ge the resolu tion to the op timum value. 1 Press [ ] to move to the langua[...]

35 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.4 Changing the Re solution Using a PC  Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality.  The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Re solution on [...]

36 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Control P anel Personalization Di splay Settings and change the resolution.[...]

37 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Re solution on Window s 7 Go to Control P anel Display Screen Resolution and change t he r esolution .[...]

38 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting Headphones (for the SA850 Model Only) 1 Connect the s tereo cable t o the [AUDIO IN] por t on the back o f the produ ct and the AUDIO OUT port on the PC. If the stereo cable is connected, the Volume ( VOL ) can be adjusted using the [ ] buttons on the f[...]

39 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting the Product to a PC as a USB HUB (for the SA850 Model Only) 2.4.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from[...]

40 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the Power When using the adapter without fixing it to the back of the monitor, the adapter jack can easily get disconnected or the cable may break. Be sure to securely fix the adapter in the groove. Put the DC pow er adapter in t he groove, w ith the sw[...]

41 3 Screen Setup 3 Screen Setup Configure the screen settings such as brightness and color tone. 3.1 MAGIC This feature pro vides the viewing an gle, brightness, and t int to suit your preferences. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture qu ality suitable for the environme nt where the produc t will be used. This menu is n[...]

42 Screen Setup 3 3 Screen Setup 3.1.2 SAMSUNG MAGIC Color Color is a new picture-q uality improvemen t technology d eveloped inde pendently by Sa msung, which delivers vivid natur al colors without pic ture quality degradatio n. This menu is not available when Bright is in Cinema or Dynamic Contrast mode. Configuring Color 1 Press [ ] on the produ[...]

43 Screen Setup 3 3 Screen Setup 3.2 Brightness Adjust the genera l brightness of th e picture. (Ran ge: 0~100) A higher value wil l make the pictu re appear brighter.  This menu is not available when Bright is set to Dynamic Co ntrast mode.  This menu is not available when Eco Light Sensor or Eco Saving is set to On . 3.2.1 Configuring Brigh[...]

44 Screen Setup 3 3 Screen Setup 3.3 Contrast Adjust the cont rast between th e objects and b ackground. (Range: 0~100) A higher va lue will increase t he contr ast to mak e the obje ct appear clearer .  This menu is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Color is in Full or Intellige[...]

45 Screen Setup 3 3 Screen Setup 3.4 Sharpness Make the ou tline of objects more clear o r blurry. (Rang e: 0~100) A higher va lue will m ake the outline of objects cle arer.  This menu is not available when Bright is in Cinema or Dynamic Contrast mode.  This menu is not available when Color is in Full or Intelligent mode. 3.4.1 Configuring S[...]

46 Screen Setup 3 3 Screen Setup 3.5 Coarse Adjust the scre en frequenc y. Only available in Analog mode. 3.5.1 Adjusting Coarse 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the product. 3 Press [ ] to move to Coarse and press [ ] on the p roduct. The follo wing screen will app ear. 4 Adjust the Coarse u sing the [ ] [...]

47 Screen Setup 3 3 Screen Setup 3.6 Fine Fine-adjust the sc reen to obt ain a vivid pict ure. Only available in Analog mode. 3.6.1 Adjusting Fine 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the product. 3 Press [ ] to move to Fine and press [ ] on the product. T he following scre en will appear. 4 Adjust the Fi ne u[...]

48 Screen Setup 3 3 Screen Setup 3.7 Response Time Accelerate th e panel response rate to make video appe ar more vivid and natura l.  It is best to set Response Time to Normal or Faster when you are not viewing a movie.  The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.7.1 Configuring Res[...]

49 4 Configuring Tint 4 Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. SAMSUNG MAGIC 4.1 Red Adjust the valu e of the colo r red in the p icture. (Range : 0~100) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in F[...]

50 Configuring Tint 4 4 Configuring Tint 4.2 Green Adjust the valu e of the colo r green in th e picture. (Ran ge: 0~100) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in Full or Intelligent mode. 4.2.1 Configuring Green 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on [...]

51 Configuring Tint 4 4 Configuring Tint 4.3 Blue Adjust the valu e of the colo r blue in the p icture. (Ran ge: 0~100) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in Full or Intelligent mode. 4.3.1 Configuring Blue 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th [...]

52 Configuring Tint 4 4 Configuring Tint 4.4 Color Tone Adjust the gen eral color tone of the pictur e. This menu is not available when Color is in Full or Intelligent mode. 4.4.1 Configuring the Color Tone Settings 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th e product . 3 Press [ ] to move to Color Tone and press [[...]

53 Configuring Tint 4 4 Configuring Tint 4.5 Gamma Adjust the mid-ra nge brigh tness (Gamma) of the pict ure. 4.5.1 Configuring Gamma 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th e product . 3 Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear. 4 Press [ ] to move to the opti on[...]

54 5 Resizing or Relocating the Screen 5 Resizing or Relocating the Screen 5.1 Image Size Change the pi cture size. 5.1.1 Changing the Picture Size 1 Press [ ] on the product. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the product. 3 Press [ ] to move to Image Size and press [ ] on the product. The followi ng screen will appear.  [...]

55 Resizing or Relocating the Screen 5 5 Resizing or Relocating the Screen 4 Press [ ] to move to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 5.2 H-Position & V-Position H-Position : Move the scre en to the left or right. V-Positio n : Move the scre en up or d own.  This menu is only available when Image [...]

56 Resizing or Relocating the Screen 5 5 Resizing or Relocating the Screen 5.3 Menu H-Position & Menu V-Position Menu H-Position : Move the menu position to th e left or right . Menu V-Position : Move the menu p osition up or down. 5.3.1 Configuring Menu H-Position or Menu V-Position 1 Press [ ] on the product. 2 Press [ ] to move to SIZE&P[...]

57 6 Setup and Reset 6 Setup and Reset 6.1 ECO The Eco Motion Sensor , Eco Light Sens or , and Eco Saving options are d isplayed on the sam e menu page so tha t you can con veniently configu re the powe r saving sett ings. 6.1.1 Eco Motion Sensor The Eco Motion Sensor activates to sa ve power when it does not detect any movement w ithin a specified[...]

58 Setup and Reset 6 6 Setup and Reset Configuring Backlight 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to ECO and pre ss [ ] on the p roduct. 4 Press [ ] to move to Backlight and press [ ] on the product. The following screen will appear.  Off : Turn off the screen an d [...]

59 Setup and Reset 6 6 Setup and Reset 6.1.2 Eco Light Sensor The Eco Saving feat ure optimizes t he view condition a nd contribut es to power saving by adjust ing the screen brightness de pending on the ambi ent light intensit y.  This menu is not available when Eco Saving is set .  This menu is not available when Bright is in Dynamic Contra[...]

60 Setup and Reset 6 6 Setup and Reset Configuring Sensitivity 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to ECO and pre ss [ ] on the p roduct. 4 Press [ ] to move to Sensitivity and press [ ] on the product . The following screen will appear.  High : High sensitivity th[...]

61 Setup and Reset 6 6 Setup and Reset Configuring Brightness Lev el 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to ECO and pre ss [ ] on the p roduct. 4 Press [ ] to move to Brightn ess Level and p ress [ ] on the product. The following screen will appear.  Brighter : Inc[...]

62 Setup and Reset 6 6 Setup and Reset 6.1.3 Eco Saving The Eco Saving function reduces po wer consumption by controlling the electric current used by the monitor pane l.  This menu is not available when Eco Light Sensor is set.  This menu is not available when Bright is in Dynamic Contrast mode. Configuring Eco Saving 1 Press [ ] on the prod[...]

63 Setup and Reset 6 6 Setup and Reset 6.1.4 Eco Icon Display Configuring Eco Icon Display 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to ECO and pre ss [ ] on the p roduct. 4 Press [ ] to move to Eco Icon Display and press [ ]. The follo wing screen w ill appear .  Off : [...]

64 Setup and Reset 6 6 Setup and Reset will decrease with a moon image displaye d. The brightness slide bar will be displaye d for 3 seconds after the sensor activates.  A pop-up as sho wn above will ap pear when an energy tree com pletes while Eco Icon Display is On . If the above picture is displayed, it means the Eco Icon Display option is On[...]

65 Setup and Reset 6 6 Setup and Reset 6.2 Menu Transparency Set the transp arency for th e menu windo ws: 6.2.1 Changing Menu Transparency 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Menu Tra nsparency a nd press [ ] o n the produc t. The following screen will appear. 4 P[...]

66 Setup and Reset 6 6 Setup and Reset 6.3 Language Set the menu language.  A change to the language setting will only be applied to the onscreen menu display.  It will not be applied to other functions on your PC. 6.3.1 Changing the Language 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 P[...]

67 Setup and Reset 6 6 Setup and Reset 6.4 PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie. PC/AV Mode is only available in Digital mode. 6.4.1 Configuring PC/AV Mode 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move [...]

68 Setup and Reset 6 6 Setup and Reset 6.5 Auto Source Activate Auto Source . 6.5.1 Configuring Auto Source 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Auto Source and press [ ] on the produc t. The followi ng screen will appear.  Auto : The input sourc e is automatical[...]

69 Setup and Reset 6 6 Setup and Reset 6.6 Display Time Set the on-screen disp lay (OSD) menu to automatically disapp ear if the m enu is not used fo r a specified period of time. Display Time can be used to spec ify the time after w hich you want the OSD menu to disappear. 6.6.1 Configuring Display Time 1 Press [ ] on the product. 2 Press [ ] to m[...]

70 Setup and Reset 6 6 Setup and Reset 6.7 Key Repeat Time Control the response ra te of a butto n when the b utton is press ed. 6.7.1 Configuring Key Repeat Time 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen[...]

71 Setup and Reset 6 6 Setup and Reset 6.8 Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Customized Key and pre ss [ ] on the p roduct. Th e following scre en will appear.  ECO - [...]

72 Setup and Reset 6 6 Setup and Reset 6.9 Off Timer On/Off Enable or disable th e off timer that au tomatically po wers off the product. 6.9.1 Configuring Off Timer On/Off 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Off Timer On/Off and press [ ] on the product. T he foll[...]

73 Setup and Reset 6 6 Setup and Reset 6.10 Off Timer Setting The off timer can be set within a ra nge of 1 to 23 hours. The product will au tomatically power off after the specified nu mber of hou rs. This menu is only available when Off Timer On/Off is set to On . 6.10.1 Configuring Off Timer Setting 1 Press [ ] on the product. 2 Press [ ] to mov[...]

74 Setup and Reset 6 6 Setup and Reset 6.11 Reset Return all the sett ings for the produ ct to the defau lt factory settings. 6.11.1 Initializing Settings (Reset) 1 Press [ ] on the product. 2 Press [ ] to move to SETUP&RESET and press [ ] on the pro duct. 3 Press [ ] to move to Reset and press [ ] on the product. The following screen will app [...]

75 7 INFORMATION Menu a nd Others 7 INFORMATION Menu and Others 7.1 INFORMATION View the current i nput sour ce, freq uency and r esolutio n. 7.1.1 Displaying INFORMATION 1 Press [ ] on the product. 2 Press [ ] to move to INFORMATION . The current i nput source , freq uency and r esolution w ill appear. 7.2 Configuring Brightness in the Startup Scr[...]

76 8 Troubleshooting Guide 8 Troubleshooting Guide 8.1 Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by using the pr[...]

77 Troubleshooting Guide 8 8 Troubleshooting Guide " Not Optimum Mode " is displayed. This message appears if the signal from th e graphics car d exceeds t he maximum reso lution or frequency fo r the produ ct. Change the maximu m resolution and freque ncy to suit the produ ct performanc e, referring t o Standard Si gnal Mode T able (page[...]

78 Troubleshooting Guide 8 8 Troubleshooting Guide The volume is too low. Adjust the volume. If the volume is still low af ter turning it up to the maximum level, a djust th e volume on your PC sound card or software program. Source device issu e A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, ha[...]

79 Troubleshooting Guide 8 8 Troubleshooting Guide 8.2 Q & A Question Answer How can I change the frequency? Set the freque ncy on your graphics card.  Windows XP: Select Control Panel Appearance a nd Themes Display Setting s Advanced Monitor , and adjust Refres h rate under Monito r settings .  Windows ME/2000: Se lect Control Panel Disp[...]

80 Troubleshooting Guide 8 8 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution?  Windows XP: Go to Control Panel Appearance and Themes Display Settings and adjust the resoluti on.  Windows ME/2000: Go to Control Pan el Display Settings and adjus[...]

81 9 Specifications 9 Specifications 9.1 General Model Name S22A650D S24A650D S27A650D S24A 850DW Panel Size 21.5 inches (54 cm) 24 inches (61 cm) 27 inches (68 cm) 24 inches (61 cm) Display area 476.64 mm (H) x 268.11 mm (V) 531.36 mm (H) x 298.89 mm (V) 597.6 mm (H) x 336.15 m m (V) 518.4 mm (H) x 324.0 mm (V) Synchronizatio n Horizontal Frequenc[...]

82 Specifications 9 9 Specifications The above specifications are subject to change without notice to improve quality. Class B device (broadcast communications device for home use) This Class B device designed for home use is registered for EMC requirements and can be used in all regions. Plug-and-Play This monitor ca n be installed and used with a[...]

83 Specifications 9 9 Specifications 9.2 PowerSaver The power-sa ving function of this produ ct reduces p ower consum ption by switch ing off the scree n and changing the co lor of the power LED if the produc t is not used for a specified period of time. The p ower is not turned off in powe r-saving mode. To swit ch the screen back on , press any k[...]

84 Specifications 9 9 Specifications 9.3 Standard Signal Mode Table  This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you selec[...]

85 Specifications 9 9 Specifications  Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.  Vertical Frequency Repeating the same picture dozen[...]

86 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7 864) http://www.samsun g.com CANADA 1-800-SAMSUNG (726-78 64) http:/ /www.samsung.com /ca (English) http://www.samsung.com/ca _fr (French) MEXI[...]

87 Appendix Appendix GUATEMALA 1-800-299-0013 http://www.samsung.com /latin (Spanish) http://www.samsun g.com/latin_en (English) HONDURAS 800-27919267 http://www. samsung.com /latin (Spanish) http://www.samsun g.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-507726 7 http://www.samsung .com/latin (Spanish) ht[...]

88 Appendix Appendix CZECH 800 - SAMSUNG (800-726786) http:/ /www.samsung.com DENMARK 70 70 19 70 http://www.s amsung.com EIRE 0818 717100 http://www.s amsung.com ESTONIA 800-7267 http:/ /www.samsung.com FINLAND 09 85635050 http://www. samsung.com FRANCE 01 48 63 00 00 http://www.samsung. com GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267 864* (*0,14 €/[...]

89 Appendix Appendix SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung .com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08 /min) http://www.sam sung.com/ch (German) http://www.samsung.com/ch _fr (French) U.K 0330 SAMSUNG (7267864) http://www.s amsung.com CIS ARMENIA 0-800-05-555 http://www.s amsung.com AZERBAIJAN 088-55-55-55 5 http://www.samsu ng.com[...]

90 Appendix Appendix INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 828 2 http://www.sam sung.com INDONESIA 0800-112-8888 021-5699- 7777 http://www.sam sung.com JAPAN 0120-327-527 http ://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsun g.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung .com PHILIPPINES 1-800-10- SAMSUNG [...]

91 Appendix Appendix MOROCCO 080 100 2255 http://www.samsu ng.com OMAN 800-SAMSUNG (726-7864) http://www.samsu ng.com/ae (English) http://www.sam sung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://ww w.samsung.com/a e (English) http://www.sam sung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.s amsung.com U.A.E 800-SAMSUNG (726-7864) http://ww[...]

92 Appendix Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate co llection systems) This marking on the product, accessories or liter ature indicates that the produ ct and its electronic accesso ries (e.g. charg er, headset, USB cab le) should not be disposed of with other [...]

93 Appendix Appendix Terminology OSD(On Screen Display) On screen display (O SD) allows you to config ure on-screen sett ings to optimize the pic ture quality as required. It allows you to ch ange the scr een brightne ss, tint, size and many othe r settings us ing menus displayed on the scr een. HUB HUB refers to a devi ce that is a co mmon connect[...]

94 Appendix Appendix Horizontal Frequency Characters or image s displayed on the monitor screen consist of numerous dots (pixels). Pixe ls are transmitte d in horizontal lines, which ar e then arran ged vertically to create a n image. The horizontal frequency is me asured in kHz and represents how many times horizont al lines per second a re transm[...]

Index 95 Index A Auto Source 68 B Before Co nnecting 30 Blue 51 Brightness 43 C Checking the C ontents 19 Cleaning 4 Coarse 46 Color Tone 52 Configuring Brightness in the Startup Screen 75 Connecting and Using a PC 31 Connecting He adphones (for the SA850 Model Only) 38 Connecting the Product to a PC a s a USB HUB (for the SA850 Model Only) 39 Cont[...]

Index Index 96 Requirements Befo re Contacting Sams ung Customer Service Center 76 Reset 74 Response Time 48 S Safety Precautions 5 Sharpness 45 Size 54 Standard Sign al Mode Table 84 T Terminology 93[...]