Samsung SRD-450 manual

4 CHANNEL DVR User Manual SRD-450[...]

2_ overview FEATURES This product enables you to record 4 channels of camera image and voice source simultaneously. This feature provides an excellent picture quality for both real time monitoring and search. You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network. As this pr[...]

English _3 OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus ne[...]

4_ overview overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamatio[...]

English _5 OVERVIEW CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high humidity. Doing so may cause fire or electric shock. If you want[...]

6_ overview overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: SAMSUNG retains the copyright on this manual. This manual cannot be copied without SAMSUNG’s prior wri[...]

English _7 OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, u[...]

8_ overview overview CONTENTS OVERVIEW 2 2 Features 3 Important Safety Instructions 6 Before Start 10 Part Names and Functions (Front) 11 Part Names and Functions (Rear) 12 Remote Control CONNECTING WITH OTHER DEVICE 14 14 Connecting the Audio, Speaker, Mouse, and Power Cable 14 Connecting the Alarm I/O 15 Network Connection GETTING STARTED 17 17 S[...]

English _9 OVERVIEW BACKUP 49 49 Backup SEARCH & PLAY 51 51 Search WEB VIEWER 53 53 Introduction 56 Live Viewer 59 Search Viewer 60 Search by Time 60 Search by Event 61 Setup 67 Information 68 Using the iPhone APPENDIX 69 69 Product Specification 71 Open Source License Report on the Product[...]

10_ overview overview PART NAMES AND FUNCTIONS (FRONT) Part Names Functions  Power Used to turn on or off the system. b DISPLAY Each time you press in Live mode, the screen will be switched in the sequence of 4-split, Single and Auto Sequence in order. c SERACH Goes to the search screen.  MENU Goes to the system menu screen.  Direction ▲[...]

English _11 OVERVIEW PART NAMES AND FUNCTIONS (REAR) Part Names Functions  DC Input (DC12V) Power connection port for 12V/4A adaptor b NETWORK RJ-45 port for network connection. USB Supports USB 2.0 protocol that enables you to back up the video signal stored in the HDD using an external memory device and to connect USB memory. c VIDEO IN Compos[...]

12_ overview overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the [ DVR ] button on the remote control. SEARCH Switches to search mode for video search. At the moment, you should select an authorized user and enter the password. MODE Changes the display mode. Channel If you press a channel number in real time monitoring[...]

English _13 OVERVIEW Changing Remote Control ID In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button. Press the [ ID ] button to check the ID of each of " REMOCON ID " and " SYSTEM ID ". The defaults are 00 for the System ID and 00 for the Rem[...]

14_ connecting with other device CONNECTING THE AUDIO, SPEAKER, MOUSE, AND POWER CABLE CONNECTING THE ALARM I/O Connecting the alarm Input signal Connection port for the alarm input signal. Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [ G ] port. Connecting the alarm output signal C[...]

English _15 CONNECTING WITH OTHER DEVICE NETWORK CONNECTION Local System Confi guration Use the router or hub in the same local network to connect to the DVR and local PC where you can control the remote DVR or check the recording data in the DVR. Connect the network port on the rear DVR panel to the router or hub. Connect the network port on the [...]

16_ connecting with other device connecting with other device Total System Confi guration You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control. Connect LAN cable of Cable/ADSL modem or[...]

English _17 GETTING STARTED getting started STARTING THE SYSTEM Connect the power cable of the DVR to the wall outlet. You will see the initialization screen. LOG ON To make use of the DVR, you must log on after the system started. You must log on before you can use the features of the DVR. Select a user account that you want to log on with. Enter [...]

18_ getting started getting started LOG IN To access menu items of Logout, System Setup, Record Setup, Backup and Search, you must have logged in. If you try to access restricted menus, the login dialog pops up. Select a user account, enter the password and press the < ENTER > button. The default user is “ admin ” and password is “ 4321[...]

English _19 LIVE live LIVE SCREEN CONFIGURATION Icons on the Live Screen Name Description  Camera Name Displays the name of the camera. b Recording Modes C C : Indicates continuous recording. A A : Indicates alarm recording. M M : Indicates motion detection recording. I I : Indicates instant recording. c Launcher Menu Displays the current time, [...]

20_ live live VIEW THE LAUNCHER MENU You can use the Launcher menu appearing on the bottom of the live screen to access it. On the Live screen, move the cursor or press the [ MENU ] button on the remote control to display the Launcher menu. Use the direction buttons or the cursor to select a desired menu. You can adjust the display time of the Laun[...]

English _21 LIVE DISPLAY You can select a screen split mode or perform the auto sequence function. Switching the screen mode You select a screen mode from single and 4-split. Press the < DISP > button from the Launcher menu. Select a split mode in the split option menu. Press the [ MODE ] button on the front panel or the remote control to swi[...]

22_ live live PLAYBACK In Live screen, you can immediately play any of the previous recordings in the selected channel. To playback by time option Select a channel to play, and right-click it to display the context menu where you select < PLAYBACK >. Select a desired start time of playback. To playback by time selection You can select < GO[...]

English _23 DVR SETUP BEFORE STARTING SETTING UP You can configure the DVR settings to your preference. How to use remote control and mouse You can use either the remote control or the cursor to select or change the setting of each menu item. To change the setting using the remote control Use the four direction (▲▼◄►) buttons to move to a d[...]

24_ DVR setup DVR setup SYSTEM You can configure the settings of DATE/TIME, SYSTEM MANAGEMENT and REMOTE CONTROLLER. See the previous section to repeat steps 1~3. (Page 23) DATE/TIME You can specify the display time. Using the mouse may help easy setup. Use the direction buttons to move to the upper < SYSTEM > icon and press the [ ENTER ] but[...]

English _25 DVR SETUP SYSTEM MANAGEMENT You can check, update and initialize the system information. Using the mouse may help easy setup. Use the direction buttons to move to < SYSTEM MANAGEMENT > in the left corner of the SYSTEM setup menu and press the [ ENTER ] button. Use direction buttons ( ▲▼◄► ) to move to a desired item, and p[...]

26_ DVR setup DVR setup To update the firmware Connect the device storing the update files to the USB port. Press < USB > button in system management menu. Select device, you will see the firmware list. Select update file in < FIRMWARE LIST >. Press < UPDATE > button in the Firmware upgrade window. The update status bar appears an[...]

English _27 DVR SETUP CAMERA You can configure the settings of each connected CAMERA, COLOR and MOTION SENSOR. CAMERA You can configure the camera settings of TITLE, COVERT and AUDIO to your preference. Using the mouse may help easy setup. Use the direction buttons to move to the upper < CAMERA > icon and press the [ ENTER ] button. The CAMER[...]

28_ DVR setup DVR setup Covert Select a camera channel to covert. Use the up/down (▲▼) buttons in the right corner to select either < ON > or < OFF > and press the [ ENTER ] button. If set to < ON >, no information of the corresponding channel will be displayed. However, it continues recording. If set to < OFF >, video i[...]

English _29 DVR SETUP MOTION SENSOR You can set the event recording so that the DVR can detect the event and specify the recording area. Using the mouse may help easy setup. Use the direction buttons to move to < MOTION SENSOR > in the left corner of the CAMERA setup menu and press the [ ENTER ] button. Select a channel and specify the sensit[...]

30_ DVR setup DVR setup DISPLAY You can configure the settings of OSD, MONITOR and SEQUENCE. See the previous section to repeat steps 1~3. (Page 23) OSD You can specify the color and language for the time, title, border and motion displayed on the screen. Using the mouse may help easy setup. Use the direction buttons to move to the upper < DISPL[...]

English _31 DVR SETUP Use direction buttons (▲▼◄►) to move to a desired item, and press the [ ENTER ] button to set the value. SEQUENCE DWELL: Specify the auto sequence dwell time. DE-INTERLACE MODE: Set to correct option of the screen trembling during playing in 4CIF size. ALARM POP-UP MODE: Set to turn on or off the display of the alarm c[...]

32_ DVR setup DVR setup When the ADD SEQUENCE window appears, press the < ADD > button. When the SEQUENCE SETUP window appears, Use direction buttons (▲▼◄►) to move to a desired item, and press the [ ENTER ] button to set the value. VIEW TYPE: Select a split mode to sequence. CONFIGURE: Select a channel to display on each split screen[...]

English _33 DVR SETUP SOUND You can configure the settings of AUDIO and BUZZER. See the previous section to repeat steps 1~3. (Page 23) AUDIO You can select to input the live audio source and select an audio channel. Using the mouse may help easy setup. Use the direction buttons to move to the upper < SOUND > icon and press the [ ENTER ] butt[...]

34_ DVR setup DVR setup USER You can configure the settings of USER MANAGEMENT, USER AUTHORITY and LOGOUT. See the previous section to repeat steps 1~3. (Page 23) USER MANAGEMENT Add a user account whose information you can edit later. Using the mouse may help easy setup. Use the direction buttons to move to the upper < USER > icon and press [...]

English _35 DVR SETUP To change the user information Select a user account that you want to change in the user list. The “ EDIT ” window appears. Make necessary changes and press the < OK > button. The “ admin ” ID can not be removed. To remove a user account, press the < DELETE > button. When your settings are completed, press [...]

36_ DVR setup DVR setup NETWORK You can configure the settings of IP SETUP, DDNS and E-MAIL. See the previous section to repeat steps 1~3. (Page 23) IP SETUP You can specify the IP of the DVR according to the network connection. Using the mouse may help easy setup. Use the direction buttons to move to the upper < NETWORK > icon and press the [...]

English _37 DVR SETUP To view the HELP You can view the explanation of each item of the IP SETUP menu. Press the < HELP > button in the lower corner of the IP SETUP menu. Read through the help and press the < CLOSE > button to close the window. DDNS You can specify a DDNS site to access when a remote user connects to the network. Using [...]

38_ DVR setup DVR setup E-MAIL You can send an email notice to DVR registered users at a certain interval or when an event occurs. Using the mouse may help easy setup. Use the direction buttons to move to < E-MAIL > in the left corner of the NETWORK setup menu and press the [ ENTER ] button. Use direction buttons (▲▼◄►) to move to a d[...]

English _39 DVR SETUP If not using a router for network connection Static IP Setup Mode Internet Connection: Use ADSL or the dedicated line for the static IP, or connect between DVR and remote users in the LAN environment. DVR Network Setup: Check the network status of the connected DVR. For other options of IP, gateway and subnet mask, contact the[...]

40_ DVR setup DVR setup DVR Connection Use the direction buttons to move to the upper < NETWORK > icon in the SYSTEM SETUP menu screen and press the [ ENTER ] button. The IP SETUP screen appears. Deselect the < DHCP > checkbox. Locate the local PC in connection with the same router and check information of gateway, subnet mask 1st DNS a[...]

English _41 DVR SETUP Use direction buttons (▲▼◄►) to move to a desired item, and press the [ ENTER ] button to set the value. SMART ALARM: Specify the availability of the alarm if the HDD has a problem. DISK FULL EVENT: Set to notify the user when the HDD is full. When your settings are completed, press the < APPLY > button on the bo[...]

42_ DVR setup DVR setup ALARM OUTPUT You can specify the alarming conditions and the operating time. Using the mouse may help easy setup. Use the direction buttons to move to < ALARM OUTPUT > in the left corner of the EVENT/SENSOR setup screen and press the [ ENTER ] button. Use direction buttons (▲▼◄►) to move to a desired item, and [...]

English _43 DVR SETUP When your settings are completed, press the < APPLY > button on the bottom. Your settings will be applied. Press the < CLOSE > button to display the confirmation dialog and return to the previous menu. E-MAIL NOTIFICATION You can specify the conditions so that you can send an email notice to DVR registered users at[...]

44_ DVR setup DVR setup DISK MANAGEMENT You can specify the recording auto deletion and overwrite options and format the HDD recording data. See the previous section to repeat steps 1~3. (Page 23) Use the direction buttons to move to the upper < DISK MANAGEMENT > icon and press the [ ENTER ] button. The DISK MANAGEMENT screen appears. Use dir[...]

English _45 DVR SETUP RECORD SETUP You can configure the settings of record-related options such as RECORDING OPERATIONS, CONTINUOUS/ MOTION RECORDING, ALARM RECORDING, INSTANT RECORDING. To start the RECORD SETUP Press the [ MENU ] button on the remote control or click < MENU > button on the launcher menu. The SETUP menu screen appears. Use [...]

46_ DVR setup DVR setup CONTINUOUS/MOTION RECORDING You can specify the continuous recording time, the recording size and the quality. Using the mouse may help easy setup. Use the direction buttons to move to < CONTINUOUS/ MOTION RECORDING > in the left corner of the RECORD setup screen and press the [ ENTER ] button. Use direction buttons (?[...]

English _47 DVR SETUP Select a desired event recording mode. NONE: Does not perform recording. CONTINUOUS: Performs the recording continuously. MOTION: Performs the recording only if a motion is detected. To record a motion, set both < SENSITIVITY > and < AREA SETUP > in " CAMERA > MOTION SENSOR ". (Page 29) CONTINUOUS/MOTI[...]

48_ DVR setup DVR setup To specify the alarm recording time You can specify the alarm recording time for each channel. From the ALARM RECORDING menu screen, select < ACTIVATION >. Your change to the recording size will be applied to the time bar. Drag the cell that you want to adjust the size, or use the direction buttons (▲▼◄►) on th[...]

English _49 BACKUP You can check the backup data size and perform backup of a desired channel or at a desired time. BACKUP Press the [ MENU ] button on the remote control or select < BACKUP > button on the launcher menu. The login dialog appears. Select a user account and enter the password. Only those users who have the backup permission can[...]

50_ backup backup Press the < RESERVE > or < WRITE > button on the bottom. RESERVE: The selected data will be backup to the HDD, which you can check in < RESERVED DATA MANAGEMENT >. WRITE: Backs up the selected data to the connected storage device. Press < CLOSE > to exit the backup. RESERVED DATA MANAGEMENT You can check th[...]

English _51 SEARCH & PLAY You can perform the search for recorded data by the time or by the search criteria such as an event. SEARCH Press the [ SEARCH ] button on the remote control or press the < SEARCH > button on the launcher menu. The login dialog appears. Select a user account and enter the password. Only those users who have the s[...]

52_ search & play search & play SEARCH BY EVENT You can search for events and play data for a specific channel. Using the mouse may help easy setup. Use the direction buttons to move to < SEARCH BY EVENT > in the left corner of the SEARCH screen and press the [ ENTER ] button. Use the direction buttons (▲▼◄►) to move to a desi[...]

English _53 web viewer INTRODUCTION What is web viewer? Web Viewer a user friendly software program that enables you to connect to the DVR in a remote area and control the live or existing video data. System Requirements The following lists the minimum suggested hardware and operating system requirements needed to run the Web Viewer. OS Windows XP [...]

54_ web viewer web viewer To connect to the Web Viewer Open the browser and provide the IP address of the DVR, or URL in the address bar. You must have specified the IP address in “ NETWORK > IP SETUP ”. The initial URL of the DVR is the last 6 digits of the MAC address, which you can check in “ SYSTEM > SYSTEM MANAGEMENT > SYSTEM IN[...]

English _55 Click < Next > when IMM4 Codec Setup Wizard appears. Click < Install >. Click < Finish > to exit setup. The installation is completed. You will see the main screen of the Live Viewer. 6. 7. 8. 9. WEB VIEWER[...]

56_ web viewer web viewer LIVE VIEWER Live Viewer At a Glance Name Description  Viewer Selection Area Consists of 4 tabs: < Live >, < Search >, < Setup > and < Information >. b Live Viewer Screen Displays the Live screen of the currently connected DVR. c Split Screen Switches the screen mode to Single, 4-split mode.  S[...]

English _57 When you can’t save the image, check if the following is applied in your Internet Explorer. “ Tools > Internet Option > Security ” Tab Uncheck “ Enable Protected Mode(requires restarting Internet Explorer) ” and restart Internet Explorer, please! Switching between split modes Click the mode switch buttons to switch the s[...]

58_ web viewer web viewer Screen Capture Click < >. The current screen of the selected channel will be saved in the default saving path of the PC. Click < ActiveX Setting > to display the Settings menu where you can change the default path. ActiveX Setting Click < >. When the Setting window appears, specify < Render > and &l[...]

English _59 SEARCH VIEWER Click the < Search > tab to display the remote play screen of the DVR. Search Viewer At a Glance Name Description  Viewer Selection Area Consists of 4 tabs: < Live >, < Search >, < Setup > and < Information >. b Search Screen Displays the playback screen of the recorded video. c Play Bar Bu[...]

60_ web viewer web viewer Name Description  Refresh Refreshes the screen  ActiveX Setting Specify the saving path of the recorded or captured screen.  Capture Image Captures the current screen. m Print Prints out the current screen. n Channel Selection Select a channel of the camera that is connected to the DVR. For details about the Activ[...]

English _61 SETUP Click the < Setup > tab to display the DVR remote setup screen. Setup Viewer At a Glance Name Description  Viewer Selection Area Consists of 4 tabs: < Live >, < Search >, < Setup > and < Information >. b Menu Tree Select a desired menu item. c Details Detailed information of the selected menu item.[...]

62_ web viewer web viewer Color setting You can adjust all settings from 0 to 100 for each channel in fine tune mode, and the default is 50. From the left menu tree, select < Camera >. Click < Color >. Make your changes as necessary in details. For more information, refer to “ COLOR ”. (Page 28) Click < Ok >. Your changes will[...]

English _63 Monitor setting You can adjust the position of the displayed items. From the left menu tree, select < Display >. Click < Monitor >. Make your changes as necessary in details. For more information, refer to “ MONITOR ”. (Page 30) Click < Ok >. Your changes will be saved. Audio/Buzzer setting You can configure the au[...]

64_ web viewer web viewer Control Device Setting From the left menu tree, select < System >. Click < Remote Controller >. Make your changes as necessary in details. For more information, refer to “ REMOTE CONTROLLER ”. (Page 26) Click < Ok >. Your changes will be saved. Recording Operation Setting From the left menu tree, sele[...]

English _65 Instant Recording Setting From the left menu tree, select < Record >. Click < Instant >. Make your changes as necessary in details. For more information, refer to “ INSTANT RECORDING ”. (Page 48) Click < Ok >. Your changes will be saved. User Management Setting From the left menu tree, select < User >. Click [...]

66_ web viewer web viewer IP Setup Setting From the left menu tree, select < Network >. Click < Network >. Check the network connection status and make your changes as necessary in details. For more information, refer to “ IP SETUP ”. (Page 36) Click < Ok >. Your changes will be saved. E-mail Setting From the left menu tree, s[...]

English _67 Alarm output setting From the left menu tree, select < Sensor >. Click < Alarm Output >. Make your changes as necessary in details. For more information, refer to “ ALARM OUTPUT ”. (Page 42) Click < Ok >. Your changes will be saved. Buzzer out setting From the left menu tree, select < Sensor >. Click < Buz[...]

68_ web viewer web viewer USING THE iPhone Select the Safari browser. Enter the IP address or URL to connect. And touch the < Go > button. http:// set IP Address: Port No(Default 8080) Ex)http://f05bb96.websamsung.net:8080 Enter the User name and Password then user can see the Image. (Default ID: admin, PW: 4321) Touch < Refresh > butto[...]

English _69 PRODUCT SPECIFICATION Item Details General System Format NTSC / PAL Remote Control Yes Operation System Embedded Linux Video Input 4CH BNC Output 1EA BNC 1 CH(CVBS) Audio Input 4CH(1Vp-p) Output RCA Type : 1CH Live Display Mode 1/4/Sequence Alarm/Motion Input 4CH Output Relay : 1CH Pre Alarm 1sec~5sec Post Alarm Select between 5 sec to [...]

70_ appendix appendix Item Details Web Viewer Client PC SPEC MS Explorer 5.5 up (32 bit only) • Support OS Windows XP, Windows Vista, Windows 7 Web Viewer Function Live / Backup / Search Support multi language NTSC : ENGLISH/FRANÇAIS/ESPAÑOL PAL : ENGLISH/FRANÇAIS/DEUTSCH/ESPAÑOL/ITALIANO/TÜRK/ РУССКИЙ/SVENSKA/ČESKÝ • • Security[...]

GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away y[...]

of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such [...]

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute s[...]

How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the[...]

install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. The[...]

The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output f[...]

offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physica[...]

Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or Requiring preservation of spec[...]

litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based[...]

and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the[...]

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by[...]

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: The modified work must itself be a software library. You must cause the files modified to car[...]

the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you mu[...]

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity [...]

write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;[...]

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and distribution terms for any publically available version or derivati[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of [...]

Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. T rademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shal[...]

SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.co[...]