Sanyo DSR-3016 manual

Digital V ideo Recorder with Multiplexer Function DSR-3016 DSR-3009 DSR-3016 DSR-3009 About this manu al • Befor e inst alling and using this unit, please rea d this manual ca refull y . Be sure to ke ep it hand y for late r refe rence. • This man ual give s basic co nnecti ons and op eratin g instru ctions for 2 models . À prop os de ce manu [...]

PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO VE COVER (OR BACK). NO USER-SERVICEABLE PART S INSIDE. REFER SERVICING T O QUALIFIED SERVI CE PERSONNEL. The lightning flash wi th arrowhead symbol, within an equilateral triangl e, is intended to alert the user to the presence of uninsu[...]

CONTENTS MAIN FE ATUR ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PAR T NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONN ECTI ONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Basic[...]

MAIN FEATURES This digital video recorder can be used to store i mages recorded by a monitoring camera onto its built-in hard disk. This digital video recorder can display images that are bei ng recorded by a camera in a spl it-screen (16, 9, 4), and it can also display images that have already been recorded in a split-screen. The DSR-3009 model sp[...]

ACCESSORIES Power cord Fixer power cord tie Hard disk pr otection If any hard disk format errors are found when the power is turned on, the whol e hard disk is checked automatically. I f any further problems are found with the hard disk, t he POWER indicator flashes. Please contact the place of purchase if you need to reformat the hard disk or make[...]

PART NAMES Front panel 1 POWE R indicator • Illuminates (red) when the power cord plug is inserted into a wall o utlet . • Flashes when there i s a problem with the internal hard disk or fan. 2 FULL in dicat or Flashes when overwriting i s set to off and the remaining space in the normal recording area of the hard disk drops to 1%* . In additio[...]

PART NAMES G MENU but ton and in dicat or Used to display the menu screens (setting screens). H ZOO M button and in dicator Used to display the zoom screen in a single screen duri ng image monitoring or playback. The indicator flashes when t he zoom screen is displayed. I Automatic camera sw i tching button and indicator (SEQUENCE) This button is u[...]

PART NAMES Rear panel 1 PC card slot Connect a network card or SCSI card (sold separately) here. Note: The PC card sl ot is for 16-bi t 5 V cards only. Do not use 32-bit card bus types of card, as they may damage the PC card sl ot of the digital video recorder. 2 AUDIO IN terminal 3 AUDIO OUT terminal 4 MIC IN te rminal 5 VIDEO IN ter minal The DSR[...]

CONNECTIONS Turn off the power f or all components before connecting them. Be sure to carefully read t he Instruction Manual for all equipment being connected to the digital video recorder. If the connections are incorrect, smoke or operating m alfunctions may result. Basic connections (DSR-3016 model) Nine cameras can be connect ed to the DSR-3009[...]

CONNECTIONS Digital series connections System control connections Use the RS-485 connector to connect a system controller (sold separately) to the digital video recorder. After connecting the s ystem controller, you will need to carry out the settings that are given in the RS-232C/RS-485 SET menu. (See page 76.) When using the RS485 (RJ-11) connect[...]

CONNECTIONS Externa l alarm se nsor setup In order to make an external alarm sensor operate, an external switch must be connected to an ALARM IN connector. When an intruder activates the external switch (such as by opening a door), an alarm signal is received and an alarm can be made to sound. The DSR-3009 model uses the connect ors marked *. Using[...]

BUILT-IN HARD DISK Hard disk Recording areas The recording areas on the hard disk (normal recording area: 80%, alarm recording area: 19%, archi ve area: 1%) are established automatically when the power for t he digital video recorder is turned on. Images are recorded i n the normal recording area when the REC/STOP button is pressed, and they are re[...]

BUILT-IN HARD DISK Recording speed tables (The recording ti me may vary depending on the images being recorded. ) These recording speed tables show t he recording times for various pi cture quality and frame/field settings when recording in th e norm al recording area of the hard di sk (80 GB). They do not include audio recording settings. The reco[...]

BUILT-IN HARD DISK When the power for the digital video recorder is turned on, the operating display appears at the top of the monitor screen. T hi s operating display shows information which is essential f or operation, such as t he date, time and picture quality. Oper ating displ ay ☞ Insert the power cord into a wall outlet and turn on the pow[...]

VIEWING CAMERA IMAGES Viewing a si ngle-scre en image Setting the camera image to single-screen display 1 Press a camera select button (example: 2). The camera 2 im age appears as a single-screen. Pausing ima ges 1 Press th e STILL bu tton. The image will be paused. 2 To cancel th e still image, press the STILL button on ce more. Pausing will be ca[...]

VIEWING CAMERA IMAGE S 2 To return an enlarged image to normal image display, press the ZO OM butto n once more. The zoom will be canceled and normal images wi ll appear. Example: T o zoom in on the camera 2 image and move the zoom frame You can select the zoom position by means of the zoom frame which appears on the screen. T he zoom frame is set [...]

VIEWING CAMERA IMAGE S Viewing mult iple-screen imag es Images from the cameras that are connect ed to the digital video recorder can be displayed in several split-screen formats. Furt herm ore, the images from each camera can be displayed in any position withi n the split screen. (See page 81. ) Viewing images as 9-screen or 16-screen displays 1 P[...]

VIEWING CAMERA IMAGE S Example: T o display images from camera 2 in the plus screen Record the images on t he hard disk beforehand. (See page 20. ) 1 Press the P LAY/STOP button. All screens will st art playing back. 2 Press the P LUS button. The plus screen is displayed. 3 Press the P LUS button once more. The plus screen continues to show the pla[...]

VIEWING CAMERA IMAGE S Automatically switching of the 4-screen images 1 Press the Q UAD button. Images appear as a 4-screen display. 2 Press the S EQUENCE b utton. Camera images will be switched automatically in 4-screen displ ay units (1 – 4, 5 – 8, 9 – 12, 13 – 16). For the DSR-3009 model, images from cameras 1 – 4, 5 – 8, or 9 – 3 [...]

VIEWING CAMERA IMAGE S Using two monitors for monitoring If you connect a m onitor to the MON2 output terminal on the rear panel, you can display the images f rom each camera as single-screen images or show an automatic switching screen on monitor 2, even while t he main monitor is showing a spl it-screen display. In addition, th e cam era images c[...]

RECORDING IMAGES IN THE NORMAL RECORDING AREA Norm al rec ordi ng Images can be recorded i n the normal recording area whi le they are being monitored. If the time has not been set, the digital video recorder cannot make recordings. Be sure to set the t ime. (See page 44.) 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET m[...]

RECORDING IMAGES IN THE NORMAL RE CORDING AREA Timer re cording The monitored images can be recorded automatically by setting start and end times for each day of the week. 1 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/ OSD button, the dat[...]

RECORDING IMAGES IN THE ALARM RECORDING AREA Alarm re cording 1 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/ OSD button, the date and time appear i n the operating display. (See page 44.) 2 Set alarm reco rding. • Press the MENU button [...]

RECORDING IMAGES IN THE ALARM RECORDING AREA Pre- alarm re cording 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/ OSD button, the date and time appear i n the operating display. (See page 44.) 2 Set pre-alarm recor ding. Press the MENU butt[...]

PLAYING BACK RECORDED IMAGES The digital video recorder can play back recorded im ages in the normal recording area (norm al recording, timer recording). Playback operations PLAY/STOP ALARM STILL ZOOM SHUTTLE HOLD SHUTTLE HOLD b Skipping to the previous or next alarm b Still image (See page 26.) b Zooming images (See page 26.) b b b Frame advance ([...]

PLAYING BACK RECORDED IMAGES Playba ck in a single screen 1 Press the P LAY/STOP button. c appears in the operating di splay and the images recorded in t he normal recording area are played back. You can press the camera select buttons to select the camera images to be played back. Note: • Image playback starts from t he point (time) that t he re[...]

PLAYING BACK RECORDED IMAGES Zoomi ng the imag e duri ng play back 1 Press th e ZOOM bu tton during playback. The images will be enlarged. 2 To return an enlarged image to normal image display, press the ZO OM butto n once more. The zoom will be canceled and normal images wi ll appear. Note: You can also change the zoom position. For details on thi[...]

PLAYING BACK RECORDED IMAGES Playing back multi ple-screen displays Recorded images can be pl ayback in several split-screen formats. Furthermore, the images from each camera can be displayed in any position within the split-screen. (S ee page 81.) 1 Press the P LAY/STOP button. Playing back images as 9-screen or 16-screen displays 1 Press th e MUL[...]

SEARCHING FOR RECORDED IMAGES Images that have been recorded in the alarm recording area and in the archive area can be played back. Furthermore, images can also be searched for by recording dat e and time, and you can also search for moving objects that have been detected by a motion sensor during image playback. 0101 0102 0103 0104 0105 0106 0107[...]

SEARCHING FOR RECORDED IMAGE S Alarm search All alarm recording images in the al arm recording area can be searched for and played back. If pre-alarm images have is recorded, the images immediately before t he alarms can also be played back. 1 Press the S EARCH button d uring recording or when the digi tal vid eo reco rder is s topped . The SEARCH [...]

SEARCHING FOR RECORDED IMAGE S Alarm thumbnail search Alarm images can be searched f or and played back from thumbnails. All alarm i mages recorded in the alarm recording area are displayed as thumbnails. 1 Press the S EARCH button d uring recording or when the digi tal vid eo reco rder is s topped . The SEARCH screen appears. 2 Use the jog dial to[...]

SEARCHING FOR RECORDED IMAGE S 2 Use the jog dial to select TIME/DATE SEARCH and th en turn the shuttle d ial clockwise. The TIME/DATE S EARCH screen appears. 1 RECORDING TOP: The date and time of the first recorded image is displayed. 2 RECORDING END: The date and time of the latest (most recently) recorded image is di splayed. 3 CHANNEL: Enter th[...]

SEARCHING FOR RECORDED IMAGE S 2 Use the jog dial to select ARCHIVE AREA SEARCH and then turn th e shuttle dial clockw ise. The ARCHIVE AREA SEARCH screen appears. 1 NO: The archive number i s displayed. 2 DATE: The date of the recorded image is displayed. 3 TIME: T he start t ime of the recorded image i s displayed. 4 CH: The channel (camera numbe[...]

SEARCHING FOR RECORDED IMAGE S 4 Use the jog dial to select the area to search (example: NORMAL), and then turn the shu ttle dial clockwise. The cursor moves to CHANNEL. Note: If the sett ing for MULT IPLEXER in the VIDEO INPUT SET menu is set to “ NO USE ” , the c urso r wi ll mo ve to SEA RCH PREVIEW. Examples of record ing area selection: ?[...]

SEARCHING FOR RECORDED IMAGE S 8 Turn the shuttle dial clockwise. Use the jog dial to set the END date and t ime (example: 8.00 pm on the current day) for the motion sensor setti ng, and then turn the shuttle dial clockwise. The cursor moves t o MOTION SENSOR. 9 Turn the shuttle dial clockwise. The motion sensor setting screen appears. Set the moti[...]

SAVING (COPYING) RECORDED IMAGES Important images that have been recorded onto the normal recordi ng area or alarm recording area can be copied to the archive ar ea of the hard disk or to the f ollowing media. A Copying images to the har d disk archive a rea B Copying images from the archive area to a CompactFlash card or microdrive C Copying image[...]

SAVING (COPYING) RECORDED IMAGES A Copying images to the hard disk archive area 1 Play back the images in the normal recording area or al arm recording area that is t o be copied, and pause playback at the image that is to be copi ed. (See page 26.) Note: Images from all cameras (1 to 16) cannot be copied all at once. Be sure to use the cam era sel[...]

SAVING (COPYING) RECORDED IMAGES B Copying images from the archive area to a CompactFlash ca rd or microdrive Insert a Comp actFlash card o r microdrive i nto the CompactFlash slot on the fr ont panel . When inserting the Com pactFlash card or microdrive, make sure that the direction of insertion is correct. 1 Display an image from the archive area[...]

SAVING (COPYING) RECORDED IMAGES 5 Use the jog dial to select the SECONDS setting, and then turn the shuttle d ial clockwise. The cursor moves to “ START ”. • PICTURES: Specify the number of images to be copied. • SECONDS: Specify the number of seconds of images to be copied. • MINUTES: Specify the number of minutes of i mages to be copie[...]

SAVING (COPYING) RECORDED IMAGES C Copying images from the archive area to a DDS (DAT) drive or CD-R drive ☞ Connecting t o a drive Insert a recommended SCS I card for connecting the DDS (DAT) drive into the PC card slot at the rear of the digital video record er. Images from the archive area can be copied to t he DDS (DAT) drive, and images reco[...]

SAVING (COPYING) RECORDED IMAGES Reading data from a DDS (DAT) drive into the archive area Note: All of the previously recorded images i n the archive area are deleted when images are transferred i n this way. 1 Press th e COPY b utton duri ng recor ding or when the digital video r ecorder is sto pped. The ARCHIVE SE T screen appears. 2 Use the jog[...]

SAVING (COPYING) RECORDED IMAGES Copying images to a CD-R dr ive 1 While viewing the still image to be copied from the archive area, pr ess the COPY b utton. The COPY screen appears. Refer to page 31 for det ails on playing back images i n the archive area. 2 Use the jog dial to select “ COPY TO ” , and then turn the shuttle dial clockw ise. Th[...]

MENU FLOW CHART AND MENU OPERATIONS These menus let you m ake a variety of settings relating to recordi ng and also relating to the multiplexer functions. Recording and monitoring will not be possible unless the vari ous settings have been made, so you should always make the appropr iate settings for the usage conditions. Menu Flow Char t <COPY [...]

MENU FLOW CHART AND MENU OPERATIONS Basic menu scr een operations 1 Press the M ENU button. The MAIN MENU screen appears. 2 Turn the jog dial clockwise or counter clockwise to move the cursor to the menu items (example: INITIAL SET). The selected item is highlighted. 3 Turn the shuttle dial clockwise. The sub-menu appears. 4 Press th e EXIT/OSD but[...]

INITIAL SET ME NU These menus let you m ake a variety of settings relating initial settings. A LANGUAGE/CLOCK SET menu This describes how t o set the menu screen language and the date and time that are norm ally displayed on the screen. I n addition, if more than one device is connect ed to the digital video recorder, you can adjust the time settin[...]

INITIAL SET MENU CLOCK SET settings (default setting : 01-01-2002 TUE 00:00:00) You should always set the dat e and time correctly. This di gital video recorder includes the recording t ime with recorded images, and uses this time for playback and searching. Example: To set the date and time to 8.30 a.m. on 22 May 2002 1 When the cu rsor is at the [...]

INITIAL SET MENU EXT. CLOCK S ET setting (default setting : 01:00) If more than t wo devices are connected at the same time, the time settings (ADJUST T IME) for the digital video recorder are also applied to these devices. 1 Connect th e other devices to the inpu t terminal (CLO CK SET IN) and output ter minal (CLOCK SET O UT) at the rear of the d[...]

INITIAL SET MENU ☞ Operabl e functions duri ng the period set by the timer Each of the followi ng menu settings is required to operat e these timer functions. After you have made t he menu settings, be sure to make the timer settings. • To chang e camera images in to automatic swit ching screens. Set “ SEQUENCE ” on SCREEN SET screen • To[...]

INITIAL SET MENU Example 2: S et the timer operation as follows ☞ To set TIME PERIOD A time zones to automatic switching screen and monitor mask. ☞ To set TIMER PERIOD B timer zones f or the motion sensor. 1 Turn the jog dial to move the cursor to the SEQUENCE setting in the SELECT TIME PERIOD menu, and then turn the sh uttle dial clockwise. Th[...]

INITIAL SET MENU D Automatic camera dete ction This automatically detects the cameras t hat are connected to t he digital video recorder and changes all settings for cameras t hat are not connected to “ OFF ”. 1 Press the M ENU button to display th e INITIAL SET men u screen, and then turn the shuttle d ial clockwise. The INITIAL SET sub-menu a[...]

RECORDING SETTING <ALARM OPERATION SET> MAIN MON. DISPLAY : FULL ALARM PRIORITY : LAST MON.2 DISPLAY : OFF RETRIGGER : OFF MOTION SENSOR -> ALARM DURATION SET -> <ALARM REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM RECORDING : OFF ALARM INTERLEAVE : ONLY PROGRAM GROUP : OFF REC RATE: @ 30FPS, DURATION: 5SEC [...]

RECORDING SETTING A RECORDING AREA SET menu This describe how t o make the various settings for each recording area. TOTAL CAPACITY di splay This shows the total recordi ng capacity of the hard disk. Thi s display cannot be changed except when the hard disk capacity itself is changed. With the initial hard disk setting, the normal recording area ta[...]

RECORDING SETTING AREA FULL RESET setting When the normal recording area and al arm recording area of the hard disk become full, the images in the recording areas will be automatically overwritten, starting from t he oldest images that have been recorded. However, you can change this setting to prevent overwriting of images when the recording areas[...]

RECORDING SETTING 5 Use the jog dial to change the setting to “ ON ” , an d then tu rn the shuttle d ial clockwise. The cursor moves to TOTAL NUMBER. 6 Turn the shuttle dial clockwise, use the jog dial to set the total number of digital video reco rders connected (example: 3), and then turn the sh uttle dial clockw ise. The cursor moves t o OVE[...]

RECORDING SETTING Relationship between RECORDING AREA SET and OVERW RITE If the normal recording area and alarm recording area become full, select AREA FULL RESET for the normal recording area or alarm recording area in the RECORDING AREA SET menu. (See page 52.) Note: No audio input is provided f rom the digital video input terminals. Audio signal[...]

RECORDING SETTING D PROGRAM REC SET menu Recording for particular cameras only can be carried out by specifying those cameras. Programs from no. 1 to no. 4 can be set. For example, program no. 1 could be set to record images f rom cameras 1 to 4 only, and program no. 2 could be set to record images from cameras 3 to 9. I n addition, these programs [...]

RECORDING SETTING E TIMER SET menu These settings must always be made when carrying out t imer recording. TIMER SET setting This sets the starting t ime and stopping time for each day, and also sets the recording speed. 1 WEEK This selects the day f or the timer setting. While a day is flashing another day can be sele cted. The 7th line (SAT) and 8[...]

RECORDING SETTING 9 Use the jog dial to change the setting to “ OFF ” , an d then tu rn the shuttle d ial clockwise. “ 30 ” flashes in t he FPS column. 10 Use the jog dial to set the recording cycle to “ 10 ” , and then turn the shuttle dial clockwise. “ OFF ” flashes i n the SET column. Note: The image qual ity for timer recording [...]

RECORDING SETTING 7 Use the jog dial to change from “– –” to “ 20 ” , and then turn the shuttle d ial clockwise. “ – – ” (minutes) flashes i n the STOP column. 8 Use the jog dial to change from “– –” to “ 30 ” , and then turn the shuttle d ial clockwise. The “ OFF ” setting for PROGRAM flashes. 9 Use the jog dial[...]

RECORDING SETTING F ALARM REC MODE SET menu These settings relate to alarm recordi ng. ALARM REC MODE SET setting This lets you set the recordi ng quality, recording method (frame or field), audio recording and recording speed for the alarm recording area. 1 Press the MENU button to select RECORD SET, and then turn the shuttle d ial clockwise. The [...]

RECORDING SETTING 5 Turn the shuttle dial clockwise, use the jog dial to set audio recording (examp le: “ ON ” ), and then turn th e shuttle dial clockwise. The cursor moves to ALARM RECORDING. Note: • Audio recording can be set when the REC RA TE setting is from 10FPS to 60FPS. • When set to “ ON ” , the letter “ A ” (audio recordi[...]

RECORDING SETTING A SW1 Recording alternates between images from the cameras where an alarm has occurred and images from all cameras that are connected . If alarms have occurred at more t han one camera, images from t he cameras where an alarm has occurred and images from all cameras a re alternately recorded one image at a time. • Recording patt[...]

RECORDING SETTING Pre- alarm re cording sett ing 1 Use the jog dial to move the cursor to ALARM RECORDING, and then turn the sh uttle dial clockw ise. “ OFF ” flashes. 2 Use the jog dial to change the “ OFF ” setting to some other mode (example: ENABLED), and then turn the shuttle d ial clockwise. The PRE-ALARM RECORDING setting changes fro[...]

RECORDING SETTING Alarm trigger setting 1 Use the jog dial to move the cursor to the ALARM TRIGGE R setting. 2 Turn the shuttle dial clockwise, use the jog dial to select the method o f detecting intruder s (example: “ SENSOR"), and then turn the shuttle dial clockwise. The cursor moves t o PICTURE QUALITY. Display examples: Alarm r ecording[...]

RECORDING SETTING G ALARM OPERATION SET menu <ALARM OPERATION SET> MAIN MON. DISPLAY : FULL ALARM PRIORITY : LAST MON.2 DISPLAY : OFF RETRIGGER : OFF MOTION SENSOR -> ALARM DURATION SET -> - - - - - - - - - - - - - - - - - - - - - - - - - - - - A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 01 T-1 LEVEL:OFF MODE[...]

RECORDING SETTING There are three types of alarm detection: external alarm, motion sensor alarm and signal loss alarm. Alarm settings include speci fying the period during which the buzzer wi ll continue to sound and the method of recording images during each alarm. Type of alarm Digital video recorder operation Monitor screen display Test pattern [...]

RECORDING SETTING Alar m display se ttings 1 Press the MENU button to select RECORD SET, and then turn the shuttle d ial clockwise. The RECORD S ET sub-menu appears, and the cursor is positioned at RECORDING A REA SE T. 2 Use the jog dial to move the cursor to ALARM OPERAT ION SET, and then tur n the shuttle dial clockwise. The ALARM OPERATION S ET[...]

RECORDING SETTING MOTION SENSOR setting (default setting: OFF) To display motion sensors on each camera image and make set tings for intruder detection. The motion sensors work as shown below. 1 Motion sen sor off status When the jog di al is turned, the cursor moves. 2 Sens or setting Turn the shuttle dial clockwis e to select “ A ” , “ B ?[...]

RECORDING SETTING 7 Use the jog dial to move the cursor to T-1, and then tur n the shuttle dial clockw ise to set “ T-2 ” . 8 Use the jog dial to move the cursor to the “ OFF ” setting for LEVEL, and th en turn the shu ttle dia l clockwi se to set the sensitivity to “ 2” . 9 Use the jog dial to move the cursor to MODE, and then turn the[...]

RECORDING SETTING 5 Repeat the ab ove procedur e to set the alarm duration for other camer as. 6 Press th e EXIT/OSD button. The display returns to t he normal screen. Resetting an al arm ☞ When images from the camera where the alarm was detected are appearing in a single-screen disp lay 1 Press the camera select button for the camera that is bei[...]

GENERAL SETTING <BUZZER SET> ALARM : ON DISK FULL : ON DISK ERROR : ON LOCK WARNING : ON KEY IN : OFF NON REC : OFF <SECURITY LOCK SET> LEVEL PASSWORD(4-8) USE ADMIN -------- OFF USER -------- OFF REC CONTROL : USER <RS-232C/RS-485 SET> CONTROL : RS-232C DATA SPEED : 19200 STATUS INFO : ¤¤¤ ALARM INFO : ¤¤¤ ADDRESS : ¤¤¤ [...]

GENERAL SETTING A DISPLAY SE T menu This sets which operation displays appear on the monitor. DISPLAY SE T setting The date and time that have been set using the CLO CK SET and other settings can be di splayed on the monitor screen during recording and playback. The def ault setting is for all displays t o be “ ON ”, so all setting items in thi[...]

GENERAL SETTING 3 Use the jog dial to enter “H ” , and then turn th e shuttle dial clockwise. The cursor will move to t he right. Repeat the above procedure to enter the title “ HALL -1F ”. Note: To change the t itle, turn the shuttle dial clockwise so that the cursor moves to the character to be changed, and then re-enter the character. No[...]

GENERAL SETTING 5 Press th e EXIT/OSD button. The display returns to t he normal screen. C SECURITY LOCK SET setting Passwords for this digital vi deo recorder can be set by t he Administrator or the User or both. Setting passwords enables privileges to be set for recording and playback operations. After the security lock has been set , if someone [...]

GENERAL SETTING ☞ User password setting Example: T o set the password to “ AB123456 ” 1 Use the jog dial to move the cursor to USER, and then turn the shuttle d ial clockwise. The first password entry bar f lashes. 2 Use the jog dial to display “A ” , and then turn th e shuttle dial. The second password entry bar flashes. • The characte[...]

GENERAL SETTING ☞ Security lock setting 1 At the normal monitor ing screen, press and hold the SHUTTLE LOCK button for app roximately 3 secon ds. The LOCK i ndicator at the front panel illuminates and the buzzer sounds. The security lock i s then set. 2 To check the security lock, press the REC/STOP button or the MENU button. The password entry s[...]

GENERAL SETTING RS-485 Selec tion Connect the RS-485 control t erminals (A and B) of the digital video recorder in series with other devices such as a controller, multiplexer or another digital video recorder. (See page 9.) 1 Turn the shuttle dial clockwise, use the jog dial to select RS-485, and then turn th e shuttle dial clockw ise. The cur sor [...]

GENERAL SETTING 3 Turn the shuttle dial clockwise. A WARNING screen appears and then “ NO ” flashes. 4 Use the jog dia l to s elect YES, and then turn the sh uttle d ial. The “ HDD INITIALIZING! ” screen appear and the hard disk i s initialized. Then the display is returned to t he HDD SET screen. 5 Press th e EXIT/OSD button. The display r[...]

GENERAL SETTING NETWORK SET setting 1 Press the M ENU button to select GENERAL SET, and then turn th e shuttle dial clockw ise. The GENE RAL SET sub-menu appears, and t he cursor is positioned at DISPLA Y SET. 2 Use the jog dial to move the cursor to NETWO RK SET, and then turn the shuttle dial clockwise. The NETWO RK SET sub-menu appears, and the [...]

GENERAL SETTING PASSWORD SE T setting For network connection there are t hree access levels, each of whic h has a password. Each password can consist of a combination of 4 to 8 alphanumeric symbols. Note: The cursor cannot be m oved to ID or PASSWORD (4-8). Example: S et AB123456 as the ID1 password. 1 Use the jog dial to move the cursor to ID1, an[...]

SCREEN SETTING <SCREEN SET> 1.MULTI SCREEN : NORMAL MULTI SCREEN SET -> 2.SEQUENCE : 1S SEQUENCE SET -> 3.MASK : OFF MASK SET -> <MAIN MENU> 1.INITIAL SET -> 2.RECORD SET -> 3.GENERAL SET -> 4.SCREEN SET -> 5.POWER FAILURE/USED TIME -> 6.COPY MENU SETTINGS -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE You can ch[...]

SCREEN SE TTING A MULTI SCREEN setting The order in which camera images are displayed in 4-screen, 9-screen and 16-screen displ ays can be set as desired. Note: The same camera image cannot be displayed more t han once on the same screen. Example 1: T o display camera 1 image on cameras 06, 11, 16 (in a 4-screen display) The DSR-3009 model can di s[...]

SCREEN SE TTING Example 2: T o display the image from camera 16 at camera 05 position (in a 16-screen display) 1 Use the jog dial to move the cursor to MULT I SCREEN, and then turn the shuttle dial clockwise. “ NORMAL ” flashes. 2 Use the jog dial to change the MULTI SCREEN setting to “ CHANGE ” , and then turn the shu ttle dial clockwise. [...]

SCREEN SE TTING 3 Use the jog dial to set the switching time to “ 05 ” , and then turn th e shuttle dial clockw ise. Automatic switching display is set to i ntervals of 5 seconds. Display examples: • 1 – 30S: Sets the automatic swi tching time to the number of seconds selected. • INDIV. : Select when setting individual switching t imes fo[...]

SCREEN SE TTING 9 Press th e EXIT/OSD button. The display returns to t he normal screen. Example 3: T o set a 5-second interval for the automatic switching of main monitor images and to prevent automatic switching from o ccurring when it is not required, such as when using the timer funct ion. 1 Set the timer setting for both TIM ER A and TIMER B i[...]

SCREEN SE TTING 12 Use the jog dial to set T-2, and then turn the shuttle dial clockwise. Repeat this procedure to switch between T-1, T-2, T-3 and T-4. 13 Use the jog dial to move the cursor to 09, and then turn the shuttle dial clockw ise. “ ON ” flashes. 14 Use the jog dial to set “ OFF ” , and then turn the shu ttle dial clockwise. Repe[...]

SCREEN SE TTING 2 Use the jog dial to move the cursor to MAS K, and then turn the shuttle d ial clockwise. “ OFF ” flashes. 3 Use the jog dial to set “ ON ” , and then tur n the shuttle dial clockwise. The cu rsor moves t o MASK SET. 4 Turn the shuttle dial clockwise. The MASK SET sub-menu wi ll be displayed, and the cursor will be at the T[...]

POWER FAILURE/USED TIME DISPLAY 1 Press the M ENU button to select POWE R FAILURE/USED TIME, and then turn the shu ttle dial clockwise. The POWER FAI LURE/USED TIME sub-menu appears. Check details such as the dat e and time of the power failure and the usage time for t he hard disk. 2 Press th e EXIT/OSD button. The display returns to t he normal s[...]

SAVING MENU SETTING DETAILS The details of m enu settings can be saved (copied) onto a CompactFlash card, and settings whic h have been saved onto a Com pactF lash card can be retrieved (loaded) in to the digital video recorder. This funct ion can be used to m ake the same settings easily or several digital video recorders. 1 Press the MENU button [...]

SAVING MENU SETTING DETAILS Loading saved menu settings This procedure loads m enu setting details that have been saved onto a CompactFlash card into the digital video recorder. Note: When loading t he settings into the digital video recorder, you can select whether t o load recording area settings also. If you read different menu settings into a d[...]

PROGRAM REC RECORDING RATE • Without PRE ALARM 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 51 6 30.000 15.000 10.000 7. 500 6.000 5.000 4.286 3. 750 3.333 3.000 2.727 2.500 2.308 2.143 2.000 1.875 15.000 7. 500 5.000 3.750 3.000 2. 500 2.143 1.875 1.667 1.500 1.364 1.250 1.154 1.071 1. 000 0.938 10.000 5. 000 3.333 2.500 2.000 1. 667 1.429 1.250 1.111 1.0[...]

INTERFACE SPECIFICATIONS RS-232C 9-pin conn ector specifications Pin No. Si gnal Op erati on Signal di recti on 1 –– – 2 RXD Receive data Computer → Digital video recorder 3 TXD Transmit data Digital video recorder → Computer 4 –– – 5 GND Ground – 6 –– – 7 RTS Request to send Digital video recorder → Computer 8 –– – [...]

INTERFACE SPECIFICATIONS Command Table The following table shows all of the commands that can be processed by the digital video recorder. If a command sent does not correspond to a digital video recorder function, the command is receiv ed but no operation is carried out. Uppe r bit 01234567 Lower bit 0 TIMER ON/ OFF 1 2 3 SHIFT ← SHIFT → 4 SHIF[...]

SPECIFICATIONS Hard disk capacity : 80 GB or 160 GB Television System : NTSC color signal standard Picture Reso lution : 720 x 240 (Field) Compression : M-JPEG Picture Q uality : 5 Levels (Basic, Normal, Enhanced, Fine, S uper Fine) Record ing Type : Fi eld Re cordin g Recording S peed : 27 Level s. Recording Area : Normal Recording Area, Alarm Rec[...]

SANYO INDUSTRIAL DIGITAL VIDEO RECORDER WARRANTY OBLI GATION S In order to obtain warranty servi ce, the product must be delivered t o and picked up from an A uthorized Sanyo Servic e Center at the user’s expense, unless specifically stated otherwise i n this warranty. The names and addresses of Authorized Sanyo Servi ce Centers may be obtai ned [...]

Printed on recycled paper Imprimé sur du papier recyclé SANYO Ele ctric Co., Ltd. Impreso en papel reciclado 1AC6P1P2522-B L8HBA/US, US2, L8HBB /US, US2 (0503KP-CZ ) Printed in Japan L8HBA/US (DSR-3016, 3009 GB) 2003. 5. 7[...]