Sharp XG-P25X manual

OPERA TION MANUAL MODEL XG-P25X LCD PROJECTOR Important Information Setup & Connections Operation Buttons Basic Operation Maintenance & T roubleshooting Appendix Multiple Function XG-P25X/CD/H(E) 02.3.19, 7:18 PM 1[...]

This equipment complies with the requirements of Directiv es 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/ EWG. Ce matériel répond aux exigences contenues dans les directiv es 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CE[...]

The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese (T raditional Chinese and Simplified Chinese), Korean and Arabic. Car efully read through the operation instructions befor e operating the LCD projector . Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in En[...]

E-1 Important Information Before using the LCD pr ojector , please read this operation manual carefull y . Intr oduction ENGLISH There ar e two impor tant reasons for pr ompt warranty registration of your new SHARP LCD Projector , using the REGISTRA TION CARD packed with the projector . 1. W ARRANTY This is to assure that you immediately r eceive t[...]

E-2 Important Information PRODUCT DISPOSAL This projector utilizes tin-lead solder , and a pressurized lamp containing a small amount of mercury . Disposal of these materials may be regulated due to envir onmental considerations. For disposal or recycling information, please contact your local authorities or , if you are located in the United State[...]

E-3 Important Information IMPOR T ANT SAFEGU ARDS CA UTION: Please read all of these instructions bef ore you operate this pr oduct and save these instructions for later use. Electrical energy can perfor m many useful functions. This product has been engineer ed and manufactured to ensure your personal safety . But IMPROPER USE CAN RESUL T IN POTEN[...]

E-4 Important Information IMPOR T ANT SAFEGU ARDS 18. Damage Requiring Service Unplug this product from the wall outlet and r efer servicing to qualified service personnel under the following conditions: a. If the power -supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has bee[...]

E-5 Important Information IMPOR T ANT SAFEGU ARDS Caution Concerning the Lamp Replacement See “Replacing the Lamp” on pages 62 and 63 . Cautions Concerning the Setup of the Projector For minimal servicing and to maintain high image quality , SHARP recommends that this pr ojector be installed in an area fr ee from humidity , dust and cigar ette [...]

E-6 Important Information IMPOR T ANT SAFEGU ARDS T emperature Monitor Function If the projector starts to overheat due to setup problems or a dirty air filter , “TEMP .” and “ ” will blink in the lower - left corner of the picture. If the temperature continues to rise, the lamp will turn off, the TEMPERA TURE W ARNING indicator on the proj[...]

E-7 Important Information 1. High-end LCD Pr ojector with Ultra High Brightness • A C 270 W Lamp Use AC 270 W lamp for excellent color uniformity and ultra high brightness. 2. Computer Compatibility • Compatible with resolutions inc luding V GA-SV GA (expanded), XGA (true resolution) and SXGA-UXGA (compressed) as well as DTV formats (480 I , 48[...]

E-8 Important Information 6. Network Capability • Self-Diagnosis/Pr ojector Status Self-diagnosis/Projector status function sends e-mail messages to a specified computer about lamp usage time and any malfunctions. • Multiple & Group Pr ojector Control Up to 250 projectors can be contr oled over a network. Projector RS-232C OUT can be used f[...]

E-9 Important Information Important Information Introduction .......................................... 1 IMPOR T ANT SAFEGU ARDS ................ 3 Outstanding Features .......................... 7 Contents ................................................ 9 How to Access the PDF Operation Manuals ............................................ 11 P a[...]

E-10 Important Information Contents Using Extended Functionality Features ........................................... 57 Multiple Function Maintenance & T roubleshooting Lamp/Maintenance Indicators ............. 61 Replacing the Lamp ............................. 62 Replacing the Air Filter ........................ 64 T roubleshooting .........[...]

E-11 Important Information PDF operation manuals in several languages are included in the Pr ojector Manual and T echnical Reference CD- ROM. T o utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it fr om the Internet (http://www.adobe.co[...]

E-12 Important Information Numbers next to the part names refer to the main pages in this manual wher e the topic is explained. 16 20 14 21 6 6 64 50 19 19 17 17 18 59 20 20 19 31 61 38 34 35 37 38 64 5 38 22 61 31 24 31 32 32 38 23 46 61 23 Front Vie w Projector MUTE button VOLUME buttons (  /  ) MENU button ADJUSTMENT buttons ( ∂ / ƒ / ?[...]

E-13 Important Information Numbers next to the part names refer to the main pages in this manual wher e the topic is explained. Remote Control P ar t Names Front Vie w Bottom View 22 38 38 32 32 31 35 31 31 34 37 31 31 31 38 33 38 24 34 31 LENS button ENTER button ENLARGE buttons AUTO SYNC button GAMMA button INPUT 1 button INPUT 2 button INPUT 4 b[...]

E-14 Important Information Using the Remote Contr ol Inserting the batteries 1 Press the tab and lift open the battery cover in the direction of the arrow . Inser t the tabs on the end of the battery cover into their slots and press the cov er into position. 3 Inser t two R-6 batteries (“AA” size , UM/SUM-3, HP-7 or similar), making sure the po[...]

E-15 Important Information Accessories Remote control RRMCGA048WJSA Supplied Accessories T wo R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Power cord For U.S., Canada etc. (11  10  , 3.6m) QACCDA010WJPZ For Europe, except U.K. (6  , 1.8m) QACCV4002CEZZ For U.K., Hong Kong and Singapore (6  , 1.8m) QACCB5024CENA For Australia[...]

E-16 Setup & Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the r ear of the projector . Power cord Make the necessary connections before proceeding. Connect the power cor d to a wall outlet. The POWER indicator lights up red and the pr ojector enters standby mode. Connections POWER indicator • If the[...]

E-17 Setup & Connections Pr ojecting Computer Images Connecting the Projector to a Computer Y ou can connect your projector to a computer for pr ojection of full color computer images. Connecting to a computer using the standard 15-pin Input 1 Connect one end of the supplied RGB cable to the INPUT 1 port on the projector . 2 Connect the other e[...]

E-18 Setup & Connections Projecting Computer Ima g es • This projector uses a 5 BNC computer input to pr event deterioration of image quality . • Connect the R (P R ), G/G sync (Y), B (P B ), HD/C sync and VD cables (sold separately) to the corr ect input terminals on the projector and an RGB switcher (sold separately) connected to the comp[...]

E-19 Setup & Connections Projecting Computer Ima g es Connecting to a computer using the RS-232C Port When the RS-232C port on the projector is connected to a computer with an RS-232C serial control cable (cr oss type, sold separately), the computer can be used to control the pr ojector and check the status of the projector . See pages 68 , 69 [...]

E-20 Setup & Connections W atching Video Images Connecting to a VCR, laser disc player and other audiovisual equipment using the standard video Input S-video cable (sold separately) Video cable (sold separately) 1 2 Audio cable (sold separately) T o S-video output ter minal T o video output terminal T o audio output ter minals VCR or Laser disc[...]

E-21 Setup & Connections W atching Component Video Images Connecting to a DVD video player , DTV* decoder and other component video equipment using the 5 BNC Input 4 T o audio output ter minals 1 3 Three BNC-RCA adaptors DTV decoder or D VD video player Example Audio cable (ø3.5 mm stereo minijack to RCA cable, commercially available) 2 T o an[...]

E-22 Setup & Connections P ower ON/OFF Press P O WER ON . Press PO WER OFF . On-screen Display • The blinking green LAMP REPLACEMENT indicator shows that the lamp is warming up. Wait until the indicator stops blinking before operating the pr ojector . • If the power is turned off and then immediately turned on again, it may take a short whi[...]

E-23 Setup & Connections Setting Up the Screen 1 Using the Adjustment Feet 3 2 Press foot releases. Adjust height of projector and remove hands fr om foot releases. Rotate feet to make minor changes. • The projector is adjustable up to appr oximately 10° from the standard position. • When the height of the projector is adjusted, the image [...]

E-24 Setup & Connections LENS Button Projector Remote control Digital Image Adjustments This function can be used to adjust the focus, zoom, keystone, v-size and digital shift settings. 1 Press LENS to select mode. Each time LENS is pressed, the screen changes as shown on the left. 2 Press ENTER to display test pattern. 3 Press ∂ / ƒ / ß / [...]

E-25 Setup & Connections Adjusting the Pr ojection Distance Position the projector perpendicular to the scr een with all feet flat and level to achieve an optimal image. Move the projector forwar d or backward if the edges of the image are distorted. • The projector lens should be centered in the middle of the scr een. If the lens center is n[...]

E-26 Setup & Connections Adjusting the Pr ojection Distance Upper and Lower Lens Shift Position • This projector is equipped with a lens shift function that lets you adjust the pr ojection height. • Adjust to match the setup configuration. Screen size: 100 inches (254 cm) STRETCH Mode: 16:9 Standard Lens as an example Upper and Lower Lens S[...]

E-27 Setup & Connections Adjusting the Projection Distance Standard Lens Throw distance ratio 1:1.8 to 2.4 NORMAL Mode (4:3) 300  200  150  133  106  100  92  84  72  60  40  261  174  131  116  92  87  80  73  63  52  35  147  98  74  65  52  49  45  41  [...]

E-28 Setup & Connections Adjusting the Projection Distance AN-P9MX Throw distance ratio 1:0.9 NORMAL Mode (4:3) 300  200  150  100  84  72  60  40  240  160  120  80  67  58  48  32  180  120  90  60  50  43  36  24  18  1  12  0  9  0  5  11  4  [...]

E-29 Setup & Connections Adjusting the Projection Distance AN-P48EZ Throw distance ratio 1:4.6 to 6.1 NORMAL Mode (4:3) 3 0 0  2 0 0  1 5 0  1 0 0  8 4  7 2  6 0  2 4 0  1 6 0  1 2 0  8 0  6 7  5 8  4 8  1 8 0  1 2 0  9 0  6 0  5 0  4 3  3 6  1 1 9  9  8 0  1  6 0  0 [...]

E-30 Setup & Connections Rear Pr ojection • Place a translucent screen between the pr ojector and the audience. • Use the pr ojector’ s menu system to reverse the projected image. (See page 51 for use of this function.) • Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet fla[...]

E-31 Operation Buttons Selecting the Input Signal Sour ce Using the Operation Buttons Press INPUT 1 . 2 . 3 or INPUT 4 . 5 on the projector or INPUT ( 1 , 2 , 3 , 4 or 5 ) on the remote control to change the mode. • When no signal is received, “NO SIGNAL” will be displayed. When a signal that the projector is not pr eset to receive is receive[...]

E-32 Operation Buttons This function can be used to superimpose a black screen over the pr ojected image. Blacking out the Pr ojected Image Press BLA CK SCREEN . The screen turns blac k and “BLACK SCREEN” is displayed on the screen. T o return to the original projected image, press BLA CK SCREEN again. Superimposing a Blac k Screen Projector Pr[...]

E-33 Operation Buttons Magnifying a Specific P or tion of an Image This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. 1 Press ENLARGE ( ) to zoom in. (Press ENLARGE ( ) to zoom out.)  1  4  9  16  36  64 2 T o retur n to  1, press UNDO . ?[...]

E-34 Operation Buttons Displa ying and Setting the Break Timer Remote control This function can be used to show the remaining time for break during meeting. 1 Press BREAK TIMER . The timer star ts to count down from 5 min utes. • Y ou can set the Break Timer 1 to 60 minutes with ∂ / ƒ . The timer starts to count down as soon as ∂ / ƒ is pre[...]

E-35 Operation Buttons Adjusting the Picture Aspect Ratio This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose NORMAL, FULL, DOT BY DOT , BORDER, STRETCH or SMART STRETCH image. 1 Press RESIZE . Each time RESIZE is pressed, the picture mode changes as show[...]

E-36 Operation Buttons Adjusting the Picture Aspect Ratio VIDEO 1024  768 768  576* –– 720P, 1035 I , 1080 I 1024  576* 1024  576* – 480 I , 480P, 580 I , 580P, NTSC, PAL, SECAM • “STRETCH” is fixed when 720P , 1035 I or 1080 I signals are entered. * The Digital Shift function can be used with these images. 480 I , 480P, 580[...]

E-37 Operation Buttons Gamma Correction Function On-screen Display (Example: RGB mode) ss s ST ANDARD PRESENT A TION CINEMA CUSTOM Projector • Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Four gamma settings a[...]

E-38 Basic Operation Using the GUI (Graphical User Interface) Menu Screen Basic Operations This projector has two sets of menu scr eens that allow you to adjust the image and various projector settings. These menu screens can be operated fr om the projector or the remote contr ol with the following procedur e. 1 Press MENU to displa y the INPUT 1, [...]

E-39 Basic Operation [ON/OFF] [ON/OFF] PRJ Mode Stack Setting Keylock Level Set Inputs RS-232C Set ID No. Password Ceiling  Front Ceiling  Rear Front Rear Level B Input 1 Input 2 Input 3 Input 4 9600bps 115200bps ID No. Input 5 38400bps Old Password Reconfirm New Password Slave Level A Master Normal Normal Language English Deutsch Español Ne[...]

E-40 Basic Operation Menu Bars Items on the INPUT 4 or 5 Mode Menu Bar Main menu Sub menu Main menu Sub menu Picture Options (2) Audio Tint  30  30 Color  30  30 Sharp  30  30 Contrast  30  30 Bright  30  30 Red  30  30 Blue Reset  30  30 CLR Temp Progressive Mode  3  3 2D Progressive 3D Progressive F[...]

E-41 Basic Operation Adjusting the Picture Y ou can adjust the projector’ s picture to your prefer ences with the following picture settings. See page 38 for the procedur e details. e. g. RGB input in INPUT 1 or 2 mode ß button For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness For weaker[...]

E-42 Basic Operation Adjusting the Picture Progr essive Mode This function allows you to select the progr essive display of a video signal. The progressive display projects a smoother video image. See page 38 for the procedur e details. Selects the progressive con version mode. 2D Progressive This function is useful to display fast-moving images su[...]

E-43 Basic Operation • Computer image adjustments can be made easily by pressing A UTO SYNC ( ). See page 45 for details. • T o reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and pr ess ENTER . Adjusting the Computer Ima g es (RGB menu only) When displaying computer patterns which are very detailed (tiling, ve[...]

E-44 Basic Operation Adjusting the Computer Images (RGB menu onl y) Special Mode Adjustment Ordinarily , the type of input signal is detected and the correct r esolution mode is automatically selected. However , for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match t[...]

E-45 Basic Operation Adjusting the Computer Images (RGB menu onl y) Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing A UTO SYNC , or automatically by setting “Auto Sync” to “Normal” or “High Speed” in the projector’ s GUI menu. See page 38 for the procedu[...]

E-46 Basic Operation Adjusting the Sound This projector’ s audio is factor y preset to standar d settings. However , you can adjust it to suit your own prefer ences by adjusting the following audio settings. See page 38 for the procedur e details. ß button Selected item Increased audio from the right speaker For stronger treble For stronger bass[...]

E-47 Basic Operation Displa ying Dual Pictures (RGB menu onl y) Picture in Pictur e function allows you to display two pictures on the same screen. Y ou can display the image input from INPUT 4 or 5 as an inset pictur e overlapping the main picture input fr om INPUT 1, 2 or 3. See page 38 for the procedur e details. Reducing Image Noise (VIDEO menu[...]

E-48 Basic Operation • When the system mode is set to “Auto”, you may not receive a clear pictur e due to signal differences. Should this occur , switch to the video system of the source signal. • AUTO cannot be set for P AL-M and P AL-N input signals. Select “P AL-M” or “P AL-N” in “Video System” menu for P AL-M and P AL-N inpu[...]

E-49 Basic Operation Selecting a Bac kground Ima g e Selected item Sharp Custom Blue None Description SHARP default image User customized image (e.g. company logo) Blue screen Black screen • By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the backgr ound image. The custom image must be a 256-color B[...]

E-50 Basic Operation These functions allow you to reduce the power consumption when the pr ojector is in standby mode. See page 38 for the procedur e details. Power Save Function Function to control the quantity of pr ojected light. Select “Low Power Mode” or “Standard Mode” to decrease or increase brightness and power consumption. Selectin[...]

E-51 Basic Operation Confirming the Lamp Usage Time This function allows you to check the accumulated lamp usage time. See page 38 for the procedur e details. • It is recommended that the lamp be r eplaced after approximately 1,400 cumulative hours of use. See pages 62 and 63 for lamp replacement. Re versing/In ver ting Projected Ima g es This pr[...]

E-52 Basic Operation Setting the Stac king Mode Y ou can double the brightness of an image by stacking two projectors and projecting same pictur e simultaneously . T o control two projectors, assign one as the master and one as the slave. The slave projector will duplicate any operational settings made to the master pr ojector . See page 38 for the[...]

E-53 Basic Operation Deselecting Inputs This function allows you to deselect unwanted signal input. See page 38 for the procedur e details. • When stack projecting, multi-scr een projecting and so on, this function can be used to cancel the RS-232C control. • Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5. • For d[...]

E-54 Basic Operation Contr oling Multiple Projector s with ID Numbers This projector can form a network of up to 250 projectors. T o identify separately and control specified projector , you need to set ID No.. The ID No. is factory preset to “001”. See page 38 for the procedur e details. Setting the ID No. Press © to select the first digit an[...]

E-55 Basic Operation Pr otecting Impor tant Settings with a P assw ord A password can be set by the user and used with the keylock level to pr event adjustments to certain settings on the GUI. See page 38 for the procedur e details. • When password is set, you need to enter the passwor d to use “PRJ Mode”, “Stack Setting”, “Keylock Leve[...]

E-56 Basic Operation Selecting the On-screen Displa y Language English is the preset language for the On-scr een Display; however , this can be changed to German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. See page 38 for the procedur e details. Displa ying the Adjustment Settings This function can be used to[...]

E-57 Multiple Function Using Extended Functionality Features This projector has outstanding network capability . • Internet access for self-diagnosis • Multiple and group pr ojector control • Simultaneous multiple pr ojector control Internet access for self-diagnosis, status information and preventive maintenance This projector can be used in[...]

E-58 Multiple Function This projector can be used in a network of pr ojectors managed from a single PC with the accompanied Sharp Advanced Presentation Softwar e Professional Edition. Projectors in confer ence rooms on the first and third floors of a building, for example, can be used for video presentations, while pr ojectors on the second floor c[...]

E-59 Multiple Function Simultaneous multiple projector contr ol for stacking and videowall projection INPUT1 INPUT2 INPUT4 INPUT5 OUTPUT Master INPUT1 Distributor INPUT2 INPUT4 INPUT5 OUTPUT Slave DVD Laser Disc RS-232C OUT RS-232C IN RS-232C OUT RS-232C IN Stack Setting Master Stack Setting Slave Set Inputs INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Yes Y[...]

E-60 Multiple Function Videowall INPUT1 INPUT2 INPUT4 INPUT5 OUTPUT Master RS-232C OUT INPUT1 Control PC Sharp Advanced Presentation Software “Professional Edition” VIDEO SOURCE RGB SOURCE2 RGB SOURCE1 INPUT2 INPUT4 INPUT5 OUTPUT Slave RS-232C IN RS-232C OUT RS-232C IN DVD 001 002 INPUT1 INPUT2 INPUT4 INPUT5 OUTPUT Slave INPUT1 INPUT2 INPUT4 IN[...]

E-61 Maintenance & T roubleshooting Lamp/Maintenance Indicator s Maintenance Indicators TEMPERA TURE WARNING indicator LAMP REPLACEMENT indicator POWER indicator Problem • Blocked air intake. • Clogged air filter . • Cooling fan breakdown. • Internal circuit failure. • Burnt-out lamp. • Lamp circuit failur e. • The filter cover is[...]

E-62 Maintenance & T roubleshooting Replacing the Lamp It is recommended that the lamp be r eplaced after approximately 1,400 cumulative hours of use or when you notice a significant deterioration of the pictur e and color quality . Carefully change the lamp by following the steps below . If the new lamp does not light after replacement, take y[...]

E-63 Maintenance & T roubleshooting Replacing the Lamp 10 Attach the lamp cage cover . Slide the lamp cage cover in the direction of the arr ow. Then tighten the user service screw . User service screw 9 Insert the new lamp cage. Press the lamp cage firmly into the lamp cage compartment. Fasten the securing screws. 8 Remove the lamp cage. Remov[...]

E-64 Maintenance & T roubleshooting • This projector is equipped with two air filters to ensur e the optimal operating condition of the projector . • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the pr ojector is used in a dusty or smoky location. • Have your nearest Sharp Authorized LCD Pr o[...]

E-65 Maintenance & T roubleshooting T r oubleshooting Check • Keylock level is set to “Level A” or “Level B”, preventing operation of some or all buttons. (See page 52 .) • Check to see if the batteries are dead. If they ar e, replace with new ones. (See page 13 .) • When the projector is set to slave, use the buttons on the maste[...]

E-66 Maintenance & T roubleshooting If you encounter any problems during setup or operation of this pr ojector , first refer to the “T roubleshooting” section on page 65 . If this operation manual does not answer your question, please contact the SHARP Service Department listed below . U.S.A. Sharp Electronics Corporation 1-888-GO-SHARP (1-[...]

E-67 Appendix Connecting Pin Assignments RGB Input Analog 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Reserve input 1 5. Composite sync 6. Ear th (red) 7. Ear th (green/sync on green) 8. Earth (blue) 9. Not connected 10. GND 11. GND 12. Bi-directional data 13. Horizontal sync signal 14. Vertical sync signal 15[...]

E-68 Appendix CONTROL CONTENTS POWER ON POWER OFF VOLUME (0 – 60) MUTE ON MUTE OFF LENS FOCUS (  30 –  30) LENS ZOOM (  30 –  30) KEYSTONE (  127 –  127) V-SIZE (  30 –  30) DIGITAL SHIFT (  96 –  96) OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR P P V M[...]

E-69 Appendix (RS-232C) Specifications and Command Settings CONTROL CONTENTS INPUT 1 (RGB 1) SIGNAL TYPE : RGB INPUT 1 (RGB 1) SIGNAL TYPE : COMPONENT INPUT 2 (RGB 2) SIGNAL TYPE : RGB INPUT 2 (RGB 2) SIGNAL TYPE : COMPONENT INPUT 1 (RGB 1) 2D PROGRESSIVE INPUT 1 (RGB 1) 3D PROGRESSIVE INPUT 1 (RGB 1) Film MODE INPUT 2 (RGB 2) 2D PROGRESSIVE INPUT [...]

E-70 Appendix (RS-232C) Specifications and Command Settings CONTROL CONTENTS BALANCE (  30 –  30) TREBLE (  3 0–  30) BASS (  30 –  30) AUDIO DISPLAY AUDIO ADJUSTMENT RESET FAO VAO SPEAKER ON SPEAKER OFF PICT IN PICT : BOTTOM RIGHT PICT IN PICT : BOTTOM LEFT PICT IN PICT : UPPER RIGHT PICT IN PICT : UPPER LEFT PICT IN PICT R[...]

E-71 Appendix Wired Remote Contr ol T erminal Specifications Specifications of wired remote control input • ø3.5 mm minijack • External:  5 V (1 A) • Internal: GND Function and transmission codes CONTROL ITEM SYSTEM CODE C1 1 1 1 1 1 1 1 1 1 1 1 1 1 ON OFF VOLUME  VOLUME  MUTE MENU LENS BLACK SCREEN ENTER RESIZE UNDO Freeze Break Ti[...]

E-72 Appendix Compatibility Char t Computer Horizontal Frequency: 15–126 kHz / V er tical Frequency: 43–200 Hz / Pixel Clock: 12–230 MHz Compatible with sync on green and composite sync signals UXGA and SXGA compatible in advanced intelligent compression or intelligent compr ession AICS (Advanced Intelligent Compression and Expansion System) [...]

E-73 Appendix Dimensions Units: inches (mm) Side View Front Vie w Bottom View T op View Side View Rear View 11 3 / 25 (282.5) 2 9 / 16 (65) 9 / 32 (7) 4 37 / 64 (116.5) 3 1 / 6 (79) 16 21 / 32 (423) 17 17 / 32 (445) 3 / 16 (4.5) 12 9 / 16 (319) 9 / 64 (3.5) 29 / 32 (23) 9 3 / 4 (248) 13 / 16 ( 20.27 ) 3 31 / 64 (88.5) 2 15 / 16 (74.5) 1 11 / 32 (34[...]

E-74 Appendix Specifications Product type Model Video system Display method LCD panel Standard Lens Projection lamp Video input signal S-video input signal Component input signal Horizontal resolution RGB input signal Pixel clock V er tical frequency Horizontal frequency Computer control signal Speaker system Rated voltage Input current Rated frequ[...]

E-75 Appendix Glossary Aspect ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 and 21:9. Auto Sync Optimizes projected computer images by automatically adjusting certain characteristics. Background Initial setting image projected when no s[...]

E-76 Appendix Inde x A AC socket ........................................................................ 16 Adjusting the Picture ....................................................... 41 Adjustment Feet .............................................................. 23 Air filter ...................................................................[...]

SHARP CORPORA TION XG-P25X/CD (E)-h 02.3.19, 7:15 PM 77[...]