Sherwood R-772 manual

OPERATING INSTRUCTIONS MANUEL D ’ UTILISATION BEDIENUNGSANLEITUNG Audio/V ideo Receiver[...]

2 ENGLISH Introduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Thi[...]

ENGLISH 3 CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 ENGLISH System Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker co[...]

• There are three types of video jacks (COMPONENT, S- VIDEO, (composite) VIDEO) for analog video connections and the HDMI connectors for digital video and audio connections. Connect them to the corresponding video jacks according to their capability. • For your reference, the excellence in picture quality is as follows : "HDMI” > &quo[...]

ENGLISH 6 Continued  Relationship between the video input signal and the video output signal * 1 : Component video signal can be output from the COMPONENT MONITOR OUT jacks only. * 2 : The OSD menu and the momentary OSD cannot be displayed via (COMPOSITE) VIDEO MONITOR OUT jack.  Note : • The OSD menu and the momentary OSD cannot be display[...]

7 ENGLISH • For analog audio recording, the ROOM 2 OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc. as shown beside. • Use these jacks to connect the corresponding outputs of a DVD player or external decorder, etc. that has 6, 7 or 8 channel analog audio outputs. • In case of 6 or 7 channel out[...]

ENGLISH 8 • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc. • If the compo[...]

ENGLISH 9 • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to [...]

ENGLISH 10 Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows :  Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. • Place [...]

ENGLISH 11 • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers. • Because this receiver c[...]

• The multi-room system kit(sold separately ) is essential for operation from a remote location . For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com. • IR IN jack allows you to control this receiver from another room with the remote control unit. • To control this receiver from a[...]

ENGLISH 13 Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button/indicator 3. VIDEO INPUT SELECTOR button 4. AUDIO INPUT SELECTOR button 5. EXTERNAL IN button 6. TUNER button 7. MASTER VOLUME CONTROL knob 8. HEADPHONE jack 9. SPEAKER button/indicator 10. SURROUND MODE button 11. STEREO button 12. SETUP button 13. CHANNEL LEVEL button 14. [...]

ENGLISH 14 • The AUX IN jack can be connected to an additional audio component such as an MP3 player, etc.   Note : • When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.  VIDEO 4 IN JACKS • The VIDEO 4 IN jacks may be also connected to an additional video component such as a ca[...]

ENGLISH 15 Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver , you should enter the setup code for eac[...]

ENGLISH 16  FUNCTION TABLE of the NUMBERED BUTTONS.  Notes : • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too. • For details about functions, refer to the o[...]

ENGLISH 17 LO ADING B A TTERIES OPERA TING COMPONENTS WITH REMO TE CONTROL REMO TE CONTROL OPERA TION RANGE • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.  When the remote control does not operate, the old batteries should be replaced. In this case, load new batte[...]

ENGLISH 18 USING FUNCTIONS OF REMO TE CONTROL Entering a setup code • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote control operation, “000” was sto[...]

ENGLISH 19 • If removing all punch-through functions is performed successfully, the LED will flicker twice. Using a punch-through function This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch- through in conjunction with any of the eight components controlled by this remot[...]

20 Programming a macro function  Note: You should press the corresponding DEVICE buttons before pressing each operation button. Example) When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver.  . Press "AUD" button to control this receiver.  . Press "POWER ON" button to turn this receiver on. ?[...]

21 REMOTE CONTROL OPERA TION RANGE ROOM 2 Remote Controls This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. • For details on ROOM 2 operation, refer to &[...]

ENGLISH 22 LISTENING TO A PROGRAM SOURCE Operations Before operation • Enter the standby mode. • The POWER ON/STANDBY button lights up amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To switch the power off, push the POWER switch again. T[...]

ENGLISH 23 • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 26. • If the AUDIO MODE is set to the mode other than "DIGITAL" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTI[...]

ENGLISH 24  DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which can handle higher data rates. Discs bearing the “ ” include the recording of up to 5.1 channels of digital signals, which can be generally thought to provide better sound quality due to the lower audio compression requ[...]

ENGLISH 25  Dolby Pro Logic IIx surround Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 channel sources and extends to 7.1channel surround playback. It delivers the most natural, full range and immersing 7.1 channel listening experience. Dolby Pro Logic IIx surround includes three modes as follows : • Dolby Pro Logic IIx Movie Whe[...]

ENGLISH 26 ENJOYING SURROUND SOUND • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be automatically selected depending on the signal format being input. Manual surround mode : You can select the desired of different surround modes selectable for the signal being input with usin[...]

ENGLISH 27 Continued   To cancel the surround mode for stereo operation • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND[...]

ENGLISH 28 Adjusting the current channel level • Each time these buttons are pressed, the corresponding channel is selected as follows: ( ): Possible depending on whether the surround back channel is set to "2 CH" or "1 CH". < >: Possible only when the digital signals from Dolby Digital or DTS program sources that includ[...]

ENGLISH 29 Memorizing the adjusted channel levels • The "1" of "REF 1" indication flickers for several seconds. • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. • The adjusted channel levels have now been memorized into the s[...]

ENGLISH 30 LISTENING TO RADIO BROADCASTS Auto tuning • Each time this button is pressed, the band changes as follows :  FM STereo  FM MONO  AM ("ST" lights up) ("ST" goes off) • When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are r[...]

ENGLISH 31 • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If "MEM" goes off, start again from the above step 2.  MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized. • INPUT SELECTOR setting[...]

ENGLISH 32 LISTENING TO RDS BROADCASTS (FM ONL Y) RDS T uner(Regional Option for some countries in Europe, etc.) • Use this function to automatically search and receive the stations offering RDS services. RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating [...]

ENGLISH 33 • Use this function to automatically search and receive the stations broadcasting the desired program type. • "PTY SRCH" is displayed. • Each time these buttons are pressed, one of 32 different types of programs is selected. (NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGH[...]

ENGLISH 34 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows:  10  20  30  --[...]

35 • ROOM 2 ~ is displayed for several seconds. • Each time this button is pressed, the ROOM 2 mode changes as follows : OFF : To turn off the ROOM 2  function. ("R2" goes off .) ON : To turn it on. ("R2" lights up.)  Note : • When the ROOM 2 mode is set to OFF, you cannot adjust the ROOM 2 volume. ROOM 2 SOURCE PLA [...]

ENGLISH Dubbing the audio and video signals separately onto VIDEO 1 Example: When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1. 1. Select VIDEO 2 as a video recording source. 2. Select CD as an audio recording source. 3. Start recording on the VIDEO 1. 4. Start play on the VIDEO 2 and the CD respectively. • The[...]

ENGLISH 37 1. Select the desired of CD, AUX, VIDEO 1~4 as a recording source. 2. For digital recording, select the digital input as recording signal input. 3. Start recording on the component connected to the OPTICAL DIGITAL OUT. 4. Start play on the desired input. DIGIT AL AUDIO RECORDING WITH MD RECORDER Dubbing from video components onto VIDEO 1[...]

ENGLISH 38 OSD Menu Settings • The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The OSD menu consists[...]

ENGLISH 39 • For the setting details, see page in  • Adjust the setting(s) in each setting category to your preference. • When the SETUP button is pressed on a sub-menu, the menu screen will be turned off.   When selecting the SYSTEM SETUP   When selecting the INPUT SETUP   When selecting the SOUND PARAMETER   Wh[...]

40 • AMP ASSIGN : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • SUBWOOFER MODE : To select the desired subwoofer mode. • HDMI AUDIO OUT : To output the digital audio signals from the HDMI MONITOR OUT connector. • TONE CONTROL : To adjust the tone (bass and treble) as desired. ?[...]

41 When selecting the SUBWOOFER MODE • "SW PLUS  " mode is valid only when "FRONT" and "CENTER" are set to "FULL RANGE" and "SUBWOOFER" is set to "YES" on the SPEAKER/ROOM EQ SETUP menu. (For details, refer to "SETTING THE SPEAKER/ ROOM EQ SETUP" on page 48.) NORMAL : When t[...]

ENGLISH 42  . Press the CURSOR LEFT(  )/RIGHT(  ) buttons to adjust the selected tone as desired. • The tone level can be adjusted within the range of -10 ~ +10 dB. • In general, we recommend the bass and treble to be adjusted to 0 dB (flat level). • Extreme settings at high volume may damage your speakers. • To complete tone adjus[...]

ENGLISH 43 When selecting the OSD POSITION ADJUST • You can adjust the position of the momentary OSD and the OSD menu that are displayed on the monitor TV. 1. Press the CURSOR UP(  )/DOWN(  ) buttons to select the OSD POSITION ADJUST, then press the ENTER button. 2. Press the CURSOR UP(  )/DOWN(  )/LEFT(  )/RIGHT(  ) buttons to [...]

ENGLISH 44 • This menu allows you to make the various settings depending on how to use the input sources connected to this receiver. SETTING THE INPUT SETUP When selecting the items other than NAME Example: When selecting the VIDEO 1  Note : • Depending on the input source, some items other than DC TRIGGER cannot be selected. 1. Press the CU[...]

ENGLISH 45 When selecting the HDMI ASSIGN When selecting the VIDEO ASSIGN When selecting the AUDIO ASSIGN • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 4. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 5 ~ 6.) • You can select HDMI 1 or HDMI 2.  Note : • In such a case that a HDMI IN [...]

ENGLISH 46 • Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode. ON : The optimum surround mode will be automatically selected depending on the signal (Auto surround mode) format being input.  OFF : You can select the desired of different surround modes selectable for the signal being [...]

ENGLISH 47 When selecting the NAME • You can give names to the input sources other than tuner. • Up to 7 characters can be entered for each name. Example: When selecting the VIDEO 1 • The name is stored in the memory.  To resume its factory input source name. • Make a blank on each digit and press the ENTER button. • The first digit fl[...]

ENGLISH 48 SETTING THE SPEAKER / ROOM EQ SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you sh[...]

ENGLISH 49 • Loud test tones are output successively and then if a series of auto setup procedure has been completed, "COMPLETED" will be displayed. • To stop the auto setup procedure while performing it, press the ENTER button. In such a case that the auto setup procedure is stopped before "COMPLETED" is displayed, the resu[...]

ENGLISH YES/NO: Select the desired depending on whether the speakers are connected or not. 2CH/1CH: Select the desired depending on the number of speakers connected to SURROUND BACK/ MULTI channels.  Notes : • When speakers are not set to "NO", you should set their distances from listening position and crossover frequencies according[...]

51  When selecting the desired unit • You can select either METERS or FEET. • Once a unit is selected, the distances are automatically changed in the selected unit.  When setting the distance • You can set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals (or 0.5 ~ 30 feet in 0.5 feet intervals). When selecting th[...]

ENGLISH 52 • You can adjust the crossover frequency within the range of 40 ~ 250 Hz. • Select "FULL RANGE" when the selected speaker can fully reproduce the low frequencies below 40 Hz. When selecting the SPEAKER CROSSOVER  Note : • You cannot select the subwoofer and the speakers set to "NO". • Set the crossover freq[...]

ENGLISH 53 When selecting the ROOM EQ SETUP • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers. • If you use different brands or sizes of speakers for some channels or have a room[...]

54 ENGLISH   When selecting the USER mode • You can adjust the parametric EQ settings to optimize the frequency characteristics of this unit's parametric equalizer to match the acoustic characteristics of your room. • The parametric equalizer uses a combination of the following three parameters to provide highly precise adjustment of[...]

55 SETTING THE CH LEVEL SETUP  Note : • Depending on the speaker settings("NO", etc.), some channels cannot be selected. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CALIBRATE"), not into preset memory("REFERENCE 1", "REFERENCE 2"[...]

ENGLISH 56 Memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2") and recall the memorized whenever you want. • The "REFERENCE 1" indication flickers. • Each time the CURSOR LEFT(  ) or RIGHT(  ) button is pressed, "REFEREN[...]

57 ENGLISH SETTING THE SOUND P ARAMETER When selecting the NIGHT MODE • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track when wa[...]

ENGLISH 58 When selecting the DOLBY PLII MUSIC • You can adjust the various surround parameters for optimum surround effect.  Note: • The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx Music mode.  When selecting the PANORAMA mode This mode extends the front stereo image[...]

59 ENGLISH When selecting the DOLBY HEADPHONE • You can select the desired listening mode for Dolby Headphone mode.  Note: • The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source. MOVIE : This provides the surround effect suitable for movie sources. MUSIC 1 : This provides the su[...]

ENGLISH 60  When selecting the Dolby Virtual Speaker Reference mode 2 SPK : When using 2 front speakers only. 3 SPK : When using 2 front and center speakers.  When selecting the Dolby Virtual Speaker Wide mode 2 SPK : When using 2 front speakers only. 3 SPK : When using 2 front and center speakers. 4 SPK : When using 2 front and 2 surround sp[...]

61 ENGLISH OFF : To turn off the ROOM 2 function.  ON : To turn it on.  Notes: • When the ROOM 2 is set to OFF, the INPUT and the VOLUME cannot be selected. • When you do not use the ROOM 2 function, set the ROOM 2 to OFF to save electricity. When selecting the ROOM 2 • The ROOM 2 function allows enjoying one source in the main room whi[...]

ENGLISH 62 T roubleshooting Guide If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This c[...]

63 ENGLISH Specifications  AMPLIFIER SECTION • Power output, stereo mode, 6 Ω , THD 1.0 %, 40 Hz~20 kHz | 2   100 W • Total harmonic distortion, at -3 dB, 6 Ω , 1 kHz | 0.05% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω , 95 W | 0.05% • Input sensitivity/impedance Line (CD, TAPE, VIDEO) | 300 mV/47k Ω • Signal[...]

ENGLISH 64 Setup Code T able ADMIRAL 050 134 AKAI 093 049 123 ALBA 068 ALBIRAL 116 ALCATEL 022 AMSTRAD 000 021 ANAM 155 156 157 ARC EN CIEL 028 039 043 145 081 ARISTONA 099 049 050 019 142 149 078 ARTHUR MARTIN 053 139 117 120 122 123 125 128 ASA 050 055 057 113 134 ATLANTIC 099 111 AUDIOSONIC 054 AUSIND 053 AUTOVOX 099 144 055 019 057 069 BAIRD 08[...]

65 ENGLISH INNO HIT 093 098 097 099 143 077 090 INTERFUNK 047 049 050 145 058 109 142 123 128 129 091 IRRADIO 093 143 053 077 090 ITT 001 140 058 105 109 122 123 128 148 129 130 134 135 083 089 JVC 033 154 KTV 099 KAISUI 006 KARCHER 006 KENDO 098 KENNEDY 144 019 109 KORTING 050 059 111 KRIESLER 099 049 050 019 142 149 078 LENOIR 099 LOEWE OPTA 008 [...]

ENGLISH 66 UNIVERSUM 092 034 054 077 UNIVOX 116 VEGAVOX 079 VOXSON 050 134 WATSON 111 WATT RADIO 046 099 051 109 116 127 WEGA 033 WHITE WESTINGHOUSE 099 111 YOKO 099 ZANUSSI 096 144 019 110 069 134 ZOPPAS 096 144 019 110 134 AKAI 042 022 052 032 033 ALBA 008 020 AMSTRAD 011 ANITSCH 009 ARC EN CIEL 042 056 052 ARISTONA 045 031 ASA 018 AWIA 011 042 B[...]

67 ENGLISH FUNAI 011 GE 019 GENERAL 014 GOLDSTAR 004 062 GOODMANS 008 011 046 GRAETZ 041 042 056 050 052 038 GRANADA 003 005 018 GRUNDIG 014 043 018 055 031 053 054 HANSEATIC 043 HARMAN- KARDON 004 HIFIVOX 042 056 052 HINARI 002 008 024 027 HITACHI 006 007 011 042 057 IMPERIAL 011 INGELEN 042 056 052 038 INGERSOL 027 ITT 005 041 042 056 050 052 033[...]

ENGLISH 68 THOMSON 042 056 052 THORN- FERGUSON 039 042 059 030 052 034 036 TOSHIBA 001 042 056 017 058 052 TOTELEVISION 013 UHER 042 ULTRA VOX 041 UNITECH 013 UNIVERSUM 041 014 043 URANYA 041 VECTOR 004 VICTOR 042 060 VIDITAL 041 WESTING HOUSE 041 WARDS 019 YAMAHA 004 042 ZANUSSI 042 056 052 ZENDER 052 ZOPPAS 042 056 DENON 017 GE 003 004 JVC 007 LG[...]

69 ENGLISH MAGAI 022 MARANTZ 012 MASPRO 016 METZ 036 MINERVA 036 MULTISTAR 022 MURATO 004 NEC 040 NEIRU 021 NOKIA 026 037 NORSAT 015 PACE 001 042 016 017 018 044 PANASONIC 032 PHILIPS 003 011 012 029 PHONOLA 016 PROSAT 030 PYE 016 QUADRAL 030 QUELLE 036 RADIOLA 016 REDIFFUSION 015 SABA 035 SALORA 026 SAMSUNG 003 022 SAT PARTNER 004 SATPORTNER 021 S[...]

70 ADCOM 021 AIWA 045 039 022 AKAI 046 AUDIO 016 ARC EN CIEL 036 014 027 030 031 018 230 DENON 054 FISHER 006 H/K 017 012 047 016 JVC 028 034 001 KENWOOD 003 020 010 029 006 MARANTZ 015 014 MONDIAL 033 NAD 048 002 042 NAKAMICHI 049 NIKKO 016 ONKYI 013 037 011 021 038 PANASONIC 051 052 PHILPS 014 PIONEER 005 008 041 RCA 007 009 REALISTIC 045 SANSUI [...]