English dropdown-ico

Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P should contain:
- informations concerning technical data of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P
- name of the manufacturer and a year of construction of the Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P item
- rules of operation, control and maintenance of the Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Sony service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Sony FCB-EX980S, FCB-EX980SP, FCB-EX980, FCB-EX980P item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

     2004 Sony Corporation Color Camera Module FCB-EX980S/EX980SP FCB-EX980/EX980P A-C4G-100- 11 (1) Technical Manual[...]

  • Page 2

    2 Ta b le of Contents Features ..................................................................... 3 Precautions ................................................................ 4 Locations of Contr ols ............................................... 5 Basic Functions ......................................................... 6 Ov er vie w of Func[...]

  • Page 3

    3 Overview Features • The CCD features 630,000 (NTSC) or 740,000 (PAL) effective picture elements and an image stabilizer for stable shooting with high-resolution. (only for FCB- EX980S/EX980SP) • The EX-view HAD TM CCD features 380,000 (NTSC) or 440,000 (PAL) effective picture elements and high-sensitivity shooting. The minimum illumination re[...]

  • Page 4

    4 Overview Software Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions. Operation Start the camera control software on your computer after [...]

  • Page 5

    5 Locations of Controls Locations of Contr ols Main Unit 1 Lens 2 CN902 jack 3 CN901 jack 4 CN601 jack (for key SW) 5 TELE button 6 WIDE button 7 Tripod screw holes When a tripod is used, please use 10 mm ( 13 / 32 in.) screws to attach it to the camera. Also, please be sure to attach the tripod securely. Front Back Bottom 1 2 3 7 4 5 6 CNN S602 S6[...]

  • Page 6

    6 Basic Functions Basic Functions Overview of Functions VISCA commands are the basis of camera control. Timing Chart As VISCA Command processing can only be carried out one time in a Vertical cycle, it takes the maximum 1V cycle time for an ACK/Completion to be returned. If the Command ACK/Completion communication time can be cut shorter than the1V[...]

  • Page 7

    7 Basic Functions Zoom The FCB-EX980S/EX980SP/EX980/EX980P employs a 26 × optical zoom lens combined with a digital zoom function; this camera allows you to zoom up to 312 × . •O ptical 26 × , f = 3.5 to 91 mm (F 1.6 to F 3.8) The horizontal angle of view is approximately 54.2 degrees (wide end) to 2.2 degrees (tele end). Digital Zoom enlarges[...]

  • Page 8

    8 Basic Functions White Balance White Balance has the following modes, all of which can be set using VISCA Commands. • Auto White Balance This mode computes the white balance value output using color information from the entire screen. It outputs the proper value using the color temperature radiating from a black subject based on a range of value[...]

  • Page 9

    9 Basic Functions AE – Manual The shutter speed (22 steps), iris (18 steps) and gain (16 steps) can be set freely by the user. AE – Bright The bright control function adjusts both gain and iris using an internal algorithm, according to a brightness level freely set by the user. Exposure is controlled by gain when dark, and by iris when bright. [...]

  • Page 10

    10 Basic Functions Exposure Compensation Exposure compensation is a function which offsets the internal reference brightness level used in the AE mode, by steps of 1.5 dB. Data Step Setting value 0E 7 10.5 dB 0D 6 9 dB 0C 5 7.5 dB 0B 4 6 dB 0A 3 4.5 dB 09 2 3 dB 08 1 1.5 dB 07 0 0 dB 06 –1 –1.5 dB 05 –2 –3 dB 04 –3 –4.5 dB 03 –4 –6 [...]

  • Page 11

    11 Basic Functions Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside, data will be saved regardless of whether it has been backed up. Effect It consists of the following functions. • Neg. Art: Negative/Positive Reversal • Black White: Monochrome Image Others E-FLIP This function [...]

  • Page 12

    12 Basic Functions Title Display The camera can be given a title containing up to 20 characters such as “ENTRANCE” or “LOBBY”. The position of the first character (horizontal, vertical) of the title, blinking state, and color can also be changed. Vposition 00 to 0A Hposition 00 to 17 Blink 00: Does not blink 01: Blinks 00 White 01 Yellow 02[...]

  • Page 13

    13 Basic Functions 1V Timing chart 8x 01 .. .. FF (Mask Setting Command) Setting command is reflected at this timing. Priv acy Zone Masking Function Privacy Zone masking protects private objects and areas such as house windows, entrances, and exits which are within the camera’s range of vision but not subject to surveillance. Privacy zone masking[...]

  • Page 14

    14 Basic Functions Privacy Zone Setting Command List Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn 0r 0r 0s 0s FF Setting Mask(Size) See “mm: mask setting list”, “nn: setting”, and “rr: w, ss: h” in “Parameters” on page 15. Display 8x 01 04 77 pp pp pp pp FF Setting Mask Display On/Off See “[...]

  • Page 15

    15 Basic Functions Parameters Mask Name mm (Hex) Mask_A 00h Mask_B 01h Mask_C 02h Mask_D 03h Mask_E 04h Mask_F 05h Mask_G 06h Mask_H 07h Mask_I 08h Mask_J 09h Mask_K 0Ah Mask_L 0Bh nn:Setting pp: x, qq: y, rr: w, ss: h pp pp pp pp: Mask bit The “-” must be “0”. qq, rr: Color code pp pp pp pp bit 7 6 5 432107654321 0765432 1076543 210 Mask -[...]

  • Page 16

    16 Basic Functions Details of Setting Commands Set Mask Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF Parameters: Comments: Two different color masks can be chosen. The colors can be chosen from among 14 colors including the possibility for semi-transparency of each color. Therefore two colors from among the total of 28 colors can be individually set f[...]

  • Page 17

    17 Basic Functions Alarm Function This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. A High level signal is output when camera detects movement inside the monitoring area. A Low level signal is output when object stops moving. However, when the mode is set to “DAY/NIGHT”[...]

  • Page 18

    18 Basic Functions ALARM Setting Command List ALARM Inquiry Command List Command Set Command Command Packet Comments CAM _ Alarm On 8x 01 04 6B 02 FF Alarm start Off 8x 01 04 6B 03 FF Alarm stop Set Mode 8x 01 04 6C pp FF Mode Setting *Select one from 13 modes Set Day Night Level 8x 01 04 6D 0p 0p 0p ppp: Day distinction AE level 0q 0q 0q FF qqq: N[...]

  • Page 19

    19 Basic Functions Flowchart of 12 Modes Function Mode “00” Set the Focus Position Hysteresis. Set to the factory preset Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * Focus goes back to the previous position. Low level signal output Far Near Foc[...]

  • Page 20

    20 Basic Functions Mode “01” Alarm On Focus Position into memory AE moves. Hysteresis is set to the factory preset. Focus moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the Focus position [...]

  • Page 21

    21 Basic Functions Mode “02” Set the AE level Hysteresis. Set to the factory preset Alarm On AE Level into memory AE moves AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE goes back to the previous level. Low level signal output AE Level Bright Dark Hysteresis Low High[...]

  • Page 22

    22 Basic Functions Mode “03” Alarm On AE level into memory AE moves. Hysteresis is set to the factory preset. AE moves outside of the hysteresis. High level signal output * Repeat this loop until Alarm off. * AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the AE level data[...]

  • Page 23

    23 Basic Functions Details of Mode “01”/”03" T1 T2 T3 T1 T1 Alarm ON Hysteresis Focus Pos AE Level Reset T1: Reset interval timer (5sec) T2: Detect timer (2sec) T3: High level signal count timer (2sec) Signal level Low High Low T1: T2: T3: Reset Reset Reset[...]

  • Page 24

    24 Basic Functions Mode “04” Mode “05” High output result of mode “00” High output result of mode “02” High output Low output High output result of mode “00” High output result of mode “03” High output Low output[...]

  • Page 25

    25 Basic Functions Mode “06” Mode “07” High output result of mode “01” High output result of mode “02” High output High output result of mode “01” High output result of mode “03” High output Low output Low output[...]

  • Page 26

    26 Basic Functions Mode “08” Mode “09” High output result of mode “00” High output result of mode “02” High output result of mode “02” High output result of mode “00” High output result of mode “02” High output result of mode “03” High output High output High output Low output High output High output High output Low [...]

  • Page 27

    27 Basic Functions Mode “0A” Mode “0B” High output result of mode “01” High output result of mode “02” High output result of mode “02” High output result of mode “01” High output result of mode “02” High output result of mode “03” High output High output High output Low output High output High output High output Low [...]

  • Page 28

    28 Basic Functions Day-Night Mode (Mode “0C”) Set the Day-Night Mode and the Day/ Night AE level. Setting by the VISCA Cmd. Alarm On Starting distinction between Day and Night. AE move Yes Brightness is higher than Day AE level No Yes Brightness is higher than Night AE level No Yes Low level signal output Low level signal output High level sign[...]

  • Page 29

    29 Basic Functions Spectral Sensitivity Characteristics FCB-EX980S/EX980SP Vibration Specifications Test Method (Random vibration) • Fix the camera at the four fixation points of the base using M2 screws. • Perform the random vibration test under the following conditions in the X, Y and Z directions for 20 minutes in each direction. • The cam[...]

  • Page 30

    30 Basic Functions Ke y Switch Cir cuitr y The circuitry shown below is an example. Note that all switches in the figure do not function in all models. For more information, refer to the command list, check functions on the camera, or contact your Sony dealer. GND 1 GND 2 KEY_AD0 3 KEY_AD1 4 KEY_AD2 5 KEY_AD3 6 KEY_AD4 7 KEY_AD5 8 KEY_AD6 9 KEY_AD7[...]

  • Page 31

    31 Basic Functions Name WIDE WIDE SLOW TELE SLOW TELE FAST DZOOM DZOOM WIDE DZOOM TELE DZOOM MAX AF NEAR FAR ONE PUSH AF INFINITY AE AUTO BRIGHT SHUTTER IRIS BACK LIGHT AUTO WB ONE PUSH WB ATW INDOOR OUTDOOR MANUAL WB Function Move ZOOM to WIDE side quickly. Move ZOOM to WIDE side slowly. Move ZOOM to TELE side slowly. Move ZOOM to TELE side quickl[...]

  • Page 32

    32 Basic Functions Name FREEZE LR- REVERSE BLACK & WHITE NEGA ART MUTE DISPLAY TITLE EXEC UP DOWN POS1 POS2 POS3 POS4 POS5 POS6 POS7 POS PRESET POS RESET APERTURE UP AUTO SLOW SHUTTER APERTURE DOWN AF SENSITIVITY BRIGHT UP BRIGHT DOWN ICR ON/OFF Function Capture still image. Horizontal reversal Black-and-white output Negative art output Mute vi[...]

  • Page 33

    33 Basic Functions Initial settings for the various functions of the FCB camera are indicated in the “Initial settings” column. The “Custom preset” column indicates whether the custom preset function can be used to store the settings. The function enables the stored settings to be recalled automatically when the camera is turned on. The “[...]

  • Page 34

    34 Basic Functions Mode/Position setting Initial settings Custom Back up preset at standby Title Display On/Off Off aa Title Setting — aa Mask Setting — aa Mask Display On/Off Off aa Mask Color Setting — aa Alarm On/Off Off aa Alarm Mode — aa Alarm Detect Level — aa E-Flip On/Off Off aa Privacy Zone On/Off Off aa Privacy Zone Setting — [...]

  • Page 35

    35 Basic Functions Mode Condition Condition Lens Mode Power Off Initializing Power On Freeze On MemRecall Zoom Direct Focus Direct ZmFo Direct Focus Auto Zoom Tele/Wide/Stop ×× a ××× a × a Zoom Direct ×× a ×× aa × a Zoom Focus Direct ×× a ×××× a × D-Zoom On/Off ×× a ××× a × a D-Zoom Separate/Combine ×× a ××× a × a D-Zo[...]

  • Page 36

    36 Basic Functions White Balance Exposure Mode Power Off Initializing Power On Freeze On MemRecall WB AUTO Indoor Outdoor OnePush ATW Manual WB Mode Switchover ×× a ×× aaaaaa One Push WB ×× a × ×××× a ×× RGain Setting ×× a × ×××××× a BGain Setting ×× a × ×××××× a Mode Power Off Initializing Power On Freeze On MemRecal[...]

  • Page 37

    37 Basic Functions Others External Synchr onization Mode Power Off Initializing Power On Freeze On MemRecall External Lock Mode ×× aaa V-Phase Up/Down/Stop/Reset ×× aa a V-Phase Direct ×× aaa V-Phase Phase Turnover Setting ×× aa a Mode Power Off Initializing Power On Freeze On MemRecall Aperture Setting ×× a ×× LR_Reverse On/Off ×× a [...]

  • Page 38

    38 Command List Command List VISCA 1) /RS-232C Commands This Manual outlines an RS-232 control protocol and command list for certain Sony cameras from which control software can be developed. THIS CONTROL PROTOCOL AND COMMAND LIST IS PROVIDED BY SONY ON AN “AS-IS BASIS” WITHOUT WARRANTY OF ANY KIND. SONY DOES NOT WARRANT ANY PARTICULAR RESULT F[...]

  • Page 39

    39 Command List VISCA Comm unication Specifications VISCA packet structure The basic unit of VISCA communication is called a packet. The first byte of the packet is called the header and comprises the sender’s and receiver’s addresses. For example, the header of the packet sent to the FCB camera assigned address 1 from the controller (address 0[...]

  • Page 40

    40 Command List Responses for commands and inquiries ● ACK message Returned by the FCB camera when it receives a command. No ACK message is returned for inquiries. ● Completion message Returned by the FCB camera when execution of commands or inquiries is completed. In the case of inquiry commands, it will contain reply data for the inquiry afte[...]

  • Page 41

    41 Command List VISCA Device Setting Command Before starting control of the FCB camera, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA network administration ● Address Sets an address of a peripheral device. Use when initializing the network, and receiving the following network change message.[...]

  • Page 42

    42 Command List Command Command Message Reply Message General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF (Example) (Completion) 90 4 2 FF 90 5 2 FF 81 01 04 38 FF 90 60 02 FF (Syntax Error) (Example) 81 01 04 38 02 FF 90 60 03 FF (Example) (Command Buffer Full) 81 01 04 08 02 FF 90 61 41 FF (Example) (Command Not Executable) 90 6 2 41FF Inqu[...]

  • Page 43

    43 Command List VISCA Camera-Issued Messages ACK/Completion Messages Command Messages ACK z0 4y FF (y:Socket No.) Completion z0 5y FF (y:Socket No.) Comments Returned when the command is accepted. Returned when the command has been executed. z = Device address + 8 Command Messages Syntax Error z0 60 02 FF Command Buffer Full z0 60 03 FF Command Can[...]

  • Page 44

    44 Command List FCB Camera Commands Command List (1/4) Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF IF_Clear Broadcast 88 01 00 01 FF CommandCancel 8x 2p FF p: Socket No.(=1or2) CAM_Power On 8x 01 04 00 02 FF Power ON/OFF Off 8x 01 04 00 03 FF CAM_Zoom Stop 8x 01 04 07 00 FF Tele(Standard) 8x 01 04 07 02 FF Wide(Stan[...]

  • Page 45

    45 Command List Command List (2/4) Command Set Command Command Packet Comments CAM_WB Auto 8x 01 04 35 00 FF Normal Auto Indoor 8x 01 04 35 01 FF Indoor mode Outdoor 8x 01 04 35 02 FF Outdoor mode One Push WB 8x 01 04 35 03 FF One Push WB mode ATW 8x 01 04 35 04 FF Auto Tracing White Balance Manual 8x 01 04 35 05 FF Manual Control mode One Push Tri[...]

  • Page 46

    46 Command List Command List (3/4) Command Set Command Command Packet Comments CAM_Aperture Reset 8x 01 04 02 00 FF Aperture Control Up 8x 01 04 02 02 FF Down 8x 01 04 02 03 FF Direct 8x 01 04 42 00 00 0p 0q FF pq: Aperture Gain CAM_LR_Reverse On 8x 01 04 61 02 FF Mirror Image ON/OFF Off 8x 01 04 61 03 FF CAM_Freeze On 8x 01 04 62 02 FF Still Image[...]

  • Page 47

    47 Command List Command List (4/4) Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn mm: Mask Settings 0r 0r 0s 0s FF nn 00: Modify, 01: New rr: W, ss:H Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF pp pp pp pp: Mask Settings (0:OFF, 1:ON) SetMask Color 8x 01 04 78 pp pp pp pp pp pp pp pp: Mask Color Set[...]

  • Page 48

    48 Command List Inquiry Command List (1/2) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On y0 50 03 FF Off CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_DZoomModeInq 8x 09 04 06 FF y0 50 02 FF D-Zoom On y0 50 03 FF D-Zoom Off CAM_DZoomC/SModeInq 8x 09 04 36 FF y0 50 00 F[...]

  • Page 49

    49 Command List Inquiry Command List (2/2) Inquiry Command Command Packet Inquiry Packet Comments CAM_LR_ReverseModeInq 8x 09 04 61 FF y0 50 02 FF On y0 50 03 FF Off CAM_FreezeModeInq 8x 09 04 62 FF y0 50 02 FF On y0 50 03 FF Off CAM_PictureEffectModeInq 8x 09 04 63 FF y0 50 00 FF Off y0 50 02 FF Neg.Art y0 50 04 FF B&W CAM_PictureFlipModeInq 8[...]

  • Page 50

    50 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 Zoom Position (HH) 1 0 70 60 50 3 40 3 2 Zoom Position (HL) 1 0 70 60 50 4 40 3 2 Zoom Position (LH) 1 0 70 60 50 5 40 3 2 Zoom Position (LL) 1 0 70 60 50 6 40 3 2 Focus Near Limit (H) 1 0 70 60[...]

  • Page 51

    51 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 R Gain (H) 1 0 70 6 Stabilizer (1: On, 0: Off) 50 3 40 3 2 R Gain (L) 1 0 70 60 50 4 40 3 2 B Gain (H) 1 0 70 60 50 5 40 3 2 B Gain (L) 1 0 Byte Bit Comments 70 60 50 6 40 30 2 1 WB Mode 0 70 60[...]

  • Page 52

    52 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 30 2 Auto ICR 1: On 0: Off 1 Key Lock 1: On 0: Off 0 Power 1:On 0:Off 70 6 Stabilizer 1: On 0: Off 50 3 4 ICR 1: On 0: Off 3 Freeze 1:On 0:Off 2 LR Reverse 1:On 0:Off 10 00 70 60 5 Privacy Zone 1: O[...]

  • Page 53

    53 Command List Enlargement Function Query Command ............... Command Packet 8x 09 7E 7E 03 FF Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 24 0 3 2 Digital Zoom Position (H) 1 0 70 60 50 34 0 3 2 Digital Zoom Position (L) 1 0 70 60 50 44 0 3 2 AF Activation [...]

  • Page 54

    54 Command List VISCA Command Setting V alues Exposure control (1/2) NTSC PAL Shutter Speed 15 10000 10000 14 6000 6000 13 4000 3500 12 3000 2500 11 2000 1750 10 1500 1250 0F 1000 1000 0E 725 600 0D 500 425 0C 350 300 0B 250 215 0A 180 150 09 125 120 08 100 100 07 90 75 06 60 50 05 30 25 04 15 12 03 8 6 02 4 3 01 2 2 00 1 1 Iris 11 F1.6 10 F2 0F F2[...]

  • Page 55

    55 Command List Exposure control (2/2) IRIS GAIN Bright 1F F1.6 28 dB 1E F1.6 26 dB 1D F1.6 24 dB 1C F1.6 22 dB 1B F1.6 20 dB 1A F1.6 18 dB 19 F1.6 16 dB 18 F1.6 14 dB 17 F1.6 12 dB 16 F1.6 10 dB 15 F1.6 8 dB 14 F1.6 6 dB 13 F1.6 4 dB 12 F1.6 2 dB 11 F1.6 0 10 F2 0 0F F2.4 0 0E F2.8 0 0D F3.4 0 0C F4 0 0B F4.8 0 0A F5.6 0 09 F6.8 0 08 F8 0 07 F9.6 [...]

  • Page 56

    56 Command List Digital Zoom Combine mode FCB-EX980S/EX980SP: X26-NTSC X26-PAL Digital Zoom Digital Zoom Digital Zoom Ratio Position Data Position Data × 1 4000 4000 × 2 5E00 5E80 × 3 6800 6880 × 4 6D00 6DC0 × 5 7000 70C0 × 6 7200 72C0 × 7 7380 7440 × 8 7480 7540 × 9 7580 7600 × 10 7600 76C0 × 11 76C0 7740 × 12 7700 77C0 FCB-EX980/EX980[...]

  • Page 57

    57 Command List Others Title setting Vposition 00 to 0A Hposition 00 to 17 Blink 00: Dose not blink 01: Blinks 00 White 01 Yellow 02 Violet Color 03 Red 04 Cyan 05 Green 06 Blue R,B gain 00~FF Aperture 00~0F 00 01 02 03 04 05 06 07 AB C DE F G H 08 09 0a 0b 0c 0d 0e 0f IJK L M N O P 10 11 12 13 14 15 16 17 QR S T UV W X 18 19 1a 1b 1c 1d 1e 1f YZ &[...]

  • Page 58

    58 Specifications Specifications FCB-EX980S/EX980SP Picture elements FCB-EX980S: Approx. 630K pixels FCB-EX980SP: Approx. 740K pixels Horizontal resolution NTSC: 470 TV lines (WIDE end) PAL: 460 TV lines (WIDE end) Lens 26 × zoom F= 3.5 mm (WIDE) to 91 mm (TELE), F1.6 to F3.8 Zoom movement speed (NTSC) Optical WIDE/Optical TELE 4.0 sec Optical WID[...]

  • Page 59

    59 Specifications FCB-EX980/EX980P Picture elements FCB-EX980: Approx. 380K pixels FCB-EX980P: Approx. 440K pixels Horizontal resolution NTSC: 470 TV lines (WIDE end) PAL: 460 TV lines (WIDE end) Lens 26 × zoom F= 2.5 mm (WIDE) to 91 mm (TELE), F1.6 to F3.8 Zoom movement speed (NTSC) Optical WIDE/Optical TELE 4.0 sec Optical WIDE/Digital TELE 6.0 [...]

  • Page 60

    60 Specifications Unit: mm (inches) Dimensions 85.2 CNN S602 S601 CNN 2-M2 Depyh 3mm or less 14 ± 0.1 4.5 8-M2 Depth 3mm or less Tr ipod Screw . Depth 7mm or less (1/4-20UNC) 53 36 29 ± 0.1 33 ± 0.1 40.2 14 ± 0.1 16 ± 0.1 CNN 27 ± 0.1 88.5 48.3 ± 0.1 10 5 39.8 73 ± 0.1 4-M2 Depth 3mm or less 10 21 ± 0.1 25.4 ± 0.1 55.3 50 (30.3) (25) 25 ([...]

  • Page 61

    61 Specifications Pin assignment CN901 54 62 1 3 987 CN901 1234 CN902 CN902 Pin No. Name Level 1 RxD CMOS 5V (low: max 0.8V, high: min 2.0V) Read Data 2 TxD CMOS 5V (low: max 0.1V, high: min 4.4V) Send Data 3 GND (for RxD&TxD) 4 DC IN 9.0V±3V 5 GND (for DC IN) 6 VBS OUT 1.0V±0.2V 7 GND (for VBS OUT) 8V LOCK PULSE External VD-Lock Pulse (EX.FV[...]