English dropdown-ico

Sony HKCU-901 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Sony HKCU-901, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Sony HKCU-901 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Sony HKCU-901. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Sony HKCU-901 should contain:
- informations concerning technical data of Sony HKCU-901
- name of the manufacturer and a year of construction of the Sony HKCU-901 item
- rules of operation, control and maintenance of the Sony HKCU-901 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Sony HKCU-901 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Sony HKCU-901, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Sony service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Sony HKCU-901.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Sony HKCU-901 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    HD CAMERA CONTROL UNIT HDCU-900 SD ANALOG INTERFACE UNIT HKCU-901 HD ANALOG INTERFACE UNIT HKCU-902 FRAME RATE CONVERTER UNIT HKCU-903 LINE CONVERTER UNIT HKCU-904 MAINTENANCE MANUAL 1st Edition (Revised 2)[...]

  • Page 2

    HDCU-900 MM ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. ! W ARNUNG Die Anleitung ist nur fü[...]

  • Page 3

    HDCU-900 MM 1 (P) CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT This camera control unit is classified as a CLASS 1 LASER PRODUCT . The CLASS 1 LASER PRODUCT label is located on the rear panel. Laser Diode Properties Material : In GaAsP W ave length : 1310 ± 40 nm Emission duration : Continuous Laser output power : _ 8 dBm For HDCU-900 For HDCU-900[...]

  • Page 4

    [...]

  • Page 5

    1 (E) HDCU-900 MM Table of Contents Manual Structure Purpose of this manual ........................................................................................ 5 (E) Related manuals ................................................................................................... 5 (E) Contents ................................................[...]

  • Page 6

    2 (E) HDCU-900 MM 2. Replacement of Main Parts 2-1. Replacing the Switching Regulator ....................................................... 2-1 (E) 2-2. Replacing the Fuse ................................................................................ 2-2 (E) 2-3. Removing the Rear Panel ..........................................................[...]

  • Page 7

    3 (E) HDCU-900 MM 3-6. HD Signal Input/Output Adjustment (HKCU-902) ............................ 3-24 (E) 3-6-1. Y/P B /P R Output Level Adjustment ..................................... 3-24 (E) 3-6-2. GBR Output Level Adjustment .......................................... 3-25 (E) 3-6-3. SYNC Output Level Adjustment ................................[...]

  • Page 8

    [...]

  • Page 9

    5 (E) HDCU-900 MM Purpose of this manual This manual is the maintenance manual of the following models : HD Camera Control Unit HDCU-900 SD Analog Interface Unit HKCU-901 HD Analog Interface Unit HKCU-902 Frame Rate Converter Unit HKCU-903 Line Converter Unit HKCU-904 This manual is intended for use by trained system and service engineers, and desc[...]

  • Page 10

    6 (E) HDCU-900 MM Contents The following is a summary of the sections of this manual. Section 1 Service Overview Describes information about circuit description, on-board indicators, adjustments after board replacement and character display functions. Section 2 Replacement of Main Parts Describes replacement of parts. Section 3 Electrical Alignment[...]

  • Page 11

    1-1 (E) HDCU-900 MM Section 1 Service Overview 1-1. Tools Name Sony P/N Remark Extension board BKP-7900 _ Front extension board Extension board JX-428 J-6394-280-A Front extension board Used to check side B of the board. Extension board EX-525A A-8326-353-A Rear side extension board Extension board EX-738 A-8327-351-A For HDC-900/950 Alignment slee[...]

  • Page 12

    1-2 (E) HDCU-900 MM 1-2. Board/Main Parts Layout Switching regulator DC fans !- ! != ![ !] 1-2. Board/Main Parts Layout 1 2 3 4 6 7 9 8 5 0[...]

  • Page 13

    1-3 (E) HDCU-900 MM No. Board Function 1 SDI-54A board (HDCU-900) HD Digital Interface S/N : 10001- 11000 (UC), 40001- 41000 (CE) SDI-82 board (HDCU-900) S/N : 11001- (UC), 41001- (CE) 2 DIF-102 board (HDCU-900) SD Digital Interface ADA-59 board (HKCU-902) HD Analog Interface SDI-54B board (HKCU-903) HD Digital Interface SDI-54C board (HKCU-904) HD[...]

  • Page 14

    1-4 (E) HDCU-900 MM 1-3. Circuit Description 1-3-1. HDCU-900 . AT-141 board The AT-141 board performs the various controls using the CPU, such as controlling the communication with the camera head, with the control panel and with the CNU, and the control of the respective circuit boards inside the CCU. The AT-141 board also performs the audio signa[...]

  • Page 15

    1-5 (E) HDCU-900 MM 1-3-2. HKCU-901 . IF-789A/789P board The IF-789A/789P board is used in combination with the RC-86 board for interfacing the SD signal of the main line using an analog interface. It has a built-in digital composite encoder and color bar generator that are used to generate the compos- ite output signal, the component output signal[...]

  • Page 16

    1-6 (E) HDCU-900 MM 1-4. Functions of the Indicators on the Boards 1-4-1. AT-141 Board AT-141 board (A side and panel side) D609 : GEN LOCK display Lights up when external synchronization is established. D611 : /1.001 display Lights up when the frame frequency factor of the HD signal is set to 1/1.001 times. n Set it with S603 on the AT-141 board. [...]

  • Page 17

    1-7 (E) HDCU-900 MM D803, D805, D807, D810 : MAIN OUTPUT display Displays the frame frequency of the camera and the MAIN HD output of the CCU. D803 lights up when the frequency is 30 Hz. D805 lights up when the frequency is 25 Hz. D807 lights up when the frequency is 24 Hz. D810 lights up during progressive operation of the camera. D804 : 1 Factory[...]

  • Page 18

    1-8 (E) HDCU-900 MM Board suffix: -22 and later DPR-163 board (A side and panel side) n When D813 and D821 light in red, be sure to clean the CAMERA connector of the unit, the CCU connector of the camera side and optical/electrical cable. It is also recom- mended to clean them when the indicators light in yellow. For the cleaning procedure, refer t[...]

  • Page 19

    1-9 (E) HDCU-900 MM 1-4-3. RC-86 Board RC-86 board (A side and panel side) D4 : POWER display Lights up when the voltage used on the board is normally supplied. D809, D810, D811 : MAIN OUTPUT display Displays the SD system. D809 lights up when the SD system is set to 525/59.941 SDI. D810 lights up when the SD system is set to 625/50I SDI. D811 ligh[...]

  • Page 20

    1-10 (E) HDCU-900 MM 1-4-4. IF-789A/789P Board (HKCU-901) IF-789A/789P board (A side and panel side) D602 : BB REF IN display Lights up when the external sync mode is set to SD and the reference signal for synchronizing the sub carrier is input. n Set it with S602 on the AT-141 board. For details, refer to Section 1-5-1, “ AT-141 Board ” of “[...]

  • Page 21

    1-11 (E) HDCU-900 MM D1006, D1007, D1008, D1009, D1010 : MAIN OUTPUT display Displays the frame frequency setting of the frame convert HD output of the CCU. D1006 lights up when the frequency is 30 Hz. D1007 lights up when the frequency is 25 Hz. D1008 lights up when the frequency is 24 Hz. D1009 lights up when the picture of the HD output is progr[...]

  • Page 22

    1-12 (E) HDCU-900 MM 1-5. Adjustment and Setting after Replacing the Boards After replacing each plug-in board, return the switches to the setting before replacement. Also, readjust and reset the following items. 1-5-1. When Replacing the AT-141 Board While referring to Section 2, “ System Setup ” of the separate Installation and Maintenance Ma[...]

  • Page 23

    1-13 (E) HDCU-900 MM 1-6. Connecting/Disconnecting the Flexible Card Wire The flexible card wire is used to connect between the following boards. Bending the flexible card wire may result in shortening the lifespan. Be careful not to bend it. . Between the CN-2004 and PS-587 boards 1 wire . Between the CN-2005 and PS-587 boards 1 wire . Between the[...]

  • Page 24

    1-14 (E) HDCU-900 MM 2. When the turn stops, pull out the remover in the straight line forcedly. n The alignment sleeve can be removed/reinstalled with the sleeve itself attached to the tip of the remover. Great care should be taken so as not to lose or damage the alignment sleeve. (Alignment sleeve: Sony P/N 9-980-074-01) 3. Clean the tip of the w[...]

  • Page 25

    1-15 (E) HDCU-900 MM 1-8. Notes for RX-53 Boards The electric parts mounted on the RX-53 board cannot be replaced or adjusted. If the electric parts need to be replaced or adjusted, replace the entire unit. 1-9. Writing and Rewriting the PLD Internal Data The write/rewrite method of the PLD (Programmable Logic Device) that is mounted on the DPR-163[...]

  • Page 26

    1-16 (E) HDCU-900 MM Data write procedure Data write procedure in the PLD (or ROM for PLD) is outlined below. For details of data write procedure, refer to “ Download Tool Operating Instruction for Device Program- ming ” . “ Download Tool Operating Instruction for Device Programming ” is available in the same site where the PLD Download Too[...]

  • Page 27

    1-17 (E) HDCU-900 MM 1-10. Circuit Protective Elements The positive characteristic thermistor (for power supply) functions as a circuit protective element on the AT-141, DPR-163, RC-86, IF-789A/789P (HKCU-901), FC-83 (HKCU-903) and LC-41 (HKCU-904) boards of the unit. The thermistor increases the internal resistance and limits the current flowing t[...]

  • Page 28

    1-18 (E) HDCU-900 MM 1-11. Notes on Repair Parts 1. Safety Related Components Warning w Components marked ! are critical to safe operation. Therefore, specified parts should be used in the case of replacement. 2. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit. These are because of parts commonality a[...]

  • Page 29

    1-19 (E) HDCU-900 MM 1-12. Character Display Function The character generation circuit built into the unit can mix character information such as the settings, state and self- diagnosis of the unit with the SD video signal, output it from the PIX OUT (RC-86 board output) and CHARAC- TER OUTPUT connectors, and display it on the SD analog monitor. The[...]

  • Page 30

    1-20 (E) HDCU-900 MM Page 1 System Status Display No. Contents 1 Displays the type of camera connected to the unit. (HDC-700/HDC-750/HDC-900/HDC-950/UNDEFINED) 2 Displays the type of external sync signal. (Free/SD Digital/HD Digital) 3 Displays the setup format of the DPR-163 board. * 1 4 Displays the setup format of the board mounted in the second[...]

  • Page 31

    1-21 (E) HDCU-900 MM Page 4 SD Signal Status Display No. Contents 1 Setting state of the aspect ratio of the SD signal (SQ/LB/EC) SQ : Squeeze LB : Letter box EC : Edge crop Displays the crop position too. ( _ 99 to 99) _ 99 : The cut-out position is in the leftmost position. 0 : Cuts out the center. 99 : The cut-out position is in the rightmost po[...]

  • Page 32

    1-22 (E) HDCU-900 MM Page 6 System Diag (2/3) Display No. Contents 1 State of camera cable connection (Open/Short/NG) 2 Existence of data from the camera ( __ /Wait/Sense/OK) __ : The communication with the camera cannot be established. Wait : The communication with the camera is being waited. Sense : The communication with the camera is being esta[...]

  • Page 33

    1-23 (E) HDCU-900 MM Page 9 DPR Diag Display Displays the details of self-diagnosis of the DPR-163 board of the unit. No. Contents 1 Whether the DPR-163 board is recognized (None/NG/OK) 2 Setting state of the S804 to S807 switches on the DPR- 163 board * 6 3 Setting state of the S810 switch on the DPR-163 board * 6 4 Setting of input signal that is[...]

  • Page 34

    1-24 (E) HDCU-900 MM a. When the RC-86 board is mounted in the second or third slot from the top of the front side of the unit No. Contents 1 Whether the RC-86 board is recognized (None/NG/OK) b. When the FC-83 board is mounted in the second slot from the top of the front side of the unit No. Contents 1 State of the format of the frame converter MA[...]

  • Page 35

    1-25 (E) HDCU-900 MM Page 12 Camera Diag Display HDC-700 SERIES HDC-900 SERIES Contents Displays the self-diagnosis result of the board on the camera side that is sent from the camera by the Diag command without change. Page 13 ROM Version (HDC-700 Series) Display Displays the ROM versions of the unit and the peripheral equipment of the unit. No. C[...]

  • Page 36

    [...]

  • Page 37

    2-1 (E) HDCU-900 MM Section 2 Replacement of Main Parts 2-1. Replacing the Switching Regulator w The components marked ! are critical to safe operation. If you replace with parts other than the specified ones, fire or electric shock may result. c When repairing or replacing the power supply block, set the voltage. If the voltage is set incorrectly,[...]

  • Page 38

    2-2 (E) HDCU-900 MM 2-2. Replacing the Fuse w The components marked ! are critical to safe operation. If you replace with parts other than the specified ones, fire or electric shock may result. Replacement Part n The CAMERA fuse differs depending on the destination of the unit. MAIN fuse Part : Fuse (6.3 A, 250 V) Part No. : ! 1-576-233-11 CAMERA f[...]

  • Page 39

    2-3 (E) HDCU-900 MM 2-3. Removing the Rear Panel 1. Turn off the main power and disconnect the plug from the outlet. m . Wait for at least three minutes before starting replacement, because there are electrically live blocks inside the machine that could cause electric shock. . If you bend or pull out the optical fiber cable forcibly, disconnection[...]

  • Page 40

    2-4 (E) HDCU-900 MM Replacing the upper fan 1. Disconnect the harness from the two harness clamps. 2. Disconnect the connector (CN23) from the PS-587 board. 3. Remove the four screws and remove the DC fan. 4. Attach a new DC fan in reverse order of steps 1 to 3. n Attach the DC fan in the direction shown below. Replacing the lower fan 1. Disconnect[...]

  • Page 41

    2-5 (E) HDCU-900 MM 2-5. Replacing the PS-587 Board Replacement Procedure 1. Turn off the main power and disconnect the plug from the outlet. n Wait for at least three minutes before starting replace- ment, because there are electrically live blocks inside the machine that could cause electric shock. 2. Remove the rear panel. (Refer to Section 2-3.[...]

  • Page 42

    2-6 (E) HDCU-900 MM 2-6. Replacing the RX-53 Board m . The electric parts mounted on the RX-53 board cannot be replaced or adjusted. If the electric parts need to be replaced or adjusted, replace the entire unit. . If you bend or pull out the optical fiber cable forcibly, disconnection may result. Handle the cable carefully. Replacement Procedure 1[...]

  • Page 43

    2-7 (E) HDCU-900 MM 8. Remove the two screws (B3 x 5, shoulder screw) and remove the board assembly in the direction of the arrow. n Be careful not to bend the cables (especially light blue and cream color). 9. Attach the new RX-53 board assembly in reverse order of steps 3 to 8. m . Before connecting the connector, clean the tip of the connector p[...]

  • Page 44

    2-8 (E) HDCU-900 MM 2-7. Replacing the CAMERA Connector 2-7. Replacing the CAMERA Connector n If you bend or pull out the optical fiber cable forcibly, disconnection may result. Handle the cable carefully. Replacement Procedure 1. Follow steps 1 to 7 of Section 2-6, “Replacing the RX- 53 Board”. n The interconnection connector should be remain [...]

  • Page 45

    3-1 (E) HDCU-900 MM Section 3 Electrical Alignment 3-1-2. Notes on Adjustments . The measure should have already been calibrated. . “3-1-4. Initialization Settings” have already been finished. . The adjustment of the HDC-900 (or HDC-950) haven already been finished. . Types of the color bars to be output from the built-in SG: Signal format Y C [...]

  • Page 46

    3-2 (E) HDCU-900 MM 3-1-3. Connection of Equipment Adjusting the HDCU-900 Adjusting the HDCU-901 Adjusting the HDCU-902 OPTICAL FIBER CABLE CCA-5 CABLE (max. 200m) MASTER SETUP UNIT MSU-700A/750 STUDIO ZOOM LENS HD COLOR CAMERA HDC-900 HD CAMERA CONTROL UNIT HDCU-900 Measure OPTICAL FIBER CABLE CCA-5 CABLE (max. 200m) MASTER SETUP UNIT MSU-700A/750[...]

  • Page 47

    3-3 (E) HDCU-900 MM 3-1-4. Initialization Settings HDCU-900 n When changing the switch settings from the customer ’ s setting positions, it is recommended to write down the customer ’ s setting positions in the following table. After completing the adjustment, be sure to return the switches to the customer ’ s setting positions. Board Switch [...]

  • Page 48

    3-4 (E) HDCU-900 MM 3-2. Audio System Adjustment 3-2-1. Microphone Level Adjustment Measures : Oscilloscope, Audio oscillator Note This adjustment is described on the premise that the output impedance of the audio oscillator is 600 Z . Preparation . Board extension : AT-141 board (front side) . Board extension : AU-271 board (CAMERA side) . S126 (M[...]

  • Page 49

    3-5 (E) HDCU-900 MM 3-2-2. Front Intercom Microphone Level Adjustment Measures : Oscilloscope, Audio generator Note This adjustment is described on the premise that the output impedance of the audio oscillator is 600 Z . DYNAMIC OFF CARBON INTERCOM CAMERA MIC POWER POWER MAIN CAMERA MAIN RED TALL Y GREEN TALL Y CABLE ALARM SHORT OPEN MIC switch INT[...]

  • Page 50

    3-6 (E) HDCU-900 MM 3-2-3. RTS Intercom Adjustment Measures : Oscilloscope, Audio generator Note . This adjustment is described on the premise that the output impedance of the audio oscillator is 600 Z . . When the intercom system is the RTS system, perform this adjustment. Preparation . MIC switch/HDCU front panel → CARBON . Board extension : AT[...]

  • Page 51

    3-7 (E) HDCU-900 MM 3-2-4. PGM Mix Level Adjustment Measures : Oscilloscope, Audio oscillator Note This adjustment is described on the premise that the output impedance of the audio oscillator is 600 Z . Preparation Board extension : AT-141 board (front side) Adjustment Procedure 1. Input a sine wave of 1 kHz, 2.2 V p-p (0 dBu) from the audio oscil[...]

  • Page 52

    3-8 (E) HDCU-900 MM 3-2-5. Side Tone Level Adjustment Measures : Oscilloscope, Audio oscillator Note This adjustment is described on the premise that the output impedance of the audio oscillator is 600 Z . Preparation . MIC switch/HDCU front panel → CARBON . Board extension : AT-141 board (front side) Adjustment Procedure 1. Connect the audio osc[...]

  • Page 53

    3-9 (E) HDCU-900 MM 3-3. Video and Reference Signal System Adjustment 3-3-1. HD-SDI Output VCO Free-run Adjustment Measure : Frequency counter Preparation . Board extension: AT-141 board (front side) . Remove the cable connected to the REFERENCE IN connector on the HDCU rear panel. . S603 (L-6)/AT-141 → /1000 . S601 (REMOTE/LOCAL)/AT-141 board pa[...]

  • Page 54

    3-10 (E) HDCU-900 MM 3-3-3. Clock (74 MHz) Duty Adjustment/DPR Board Perform “ 3-3-2. Clock (74MHz) Duty Adjustment/AT Board ” before starting this adjustment. Measure : Oscilloscope (20 MHz BWLimit: ON) Note This adjustment corresponds to the DPR-163 board with part No. suffix -14. Adjustment Procedure Measuring point : TP307 (F-8)/DPR-163 Adj[...]

  • Page 55

    3-11 (E) HDCU-900 MM 3-4. Video Signal System Adjustment (RC-86 Board) 3-4-1. SD-SDI Output VCO Adjustment Measure : Frequency counter Note After replacing IC508 or IC510 on the RC-86 board only, perform this adjustment. Preparation . Board extension : RC-86 board (front side) . COR501 (B-8)/RC-86 → FREE RUN (Short between 2- pin and 3-pin.) . Co[...]

  • Page 56

    3-12 (E) HDCU-900 MM 3-4-2. SD-SDI Input VCO Free-run Adjustment Measure : Frequency counter Note After replacing IC601 on the RC-86 board only, perform this adjustment. Preparation . Board extension : RC-86 board (front side) . S110 (L-8)/AT-141 → LOCAL . S101 (L-8)/AT-141 → All OFF . COR601 (A-3)/RC-86 → FREE RUN (Short between 2- pin and 3[...]

  • Page 57

    3-13 (E) HDCU-900 MM 3-4. Video Signal System Adjustment (RC-86 Board) 3-4-3. Main Clock (74 MHz) Duty Adjustment Measure : Oscilloscope (20 MHz BWLimit: ON) Note This adjustment corresponds to the RC-86 board with part No. suffix -14. Preparation . Board extension : RC-86 board (front side) Adjustment Procedure Measuring point : TP201 (C-6)/RC-86 [...]

  • Page 58

    3-14 (E) HDCU-900 MM 3-4. Video Signal System Adjustment (RC-86 Board) 3-4-5. PIX Output Level Adjustment Measures : Oscilloscope, SD waveform monitor Preparation . Board extension : RC-86 board (front side) . Board extension : DIF-102 board (rear side) .1 RV354 (B-4)/RC-86 → mechanical center (ENC LEVEL) . S811-1 (M-6)/RC-86 → ON . S811-2 (M-6[...]

  • Page 59

    3-15 (E) HDCU-900 MM 3-4-6. WF Output Level Adjustment Measures : Oscilloscope, SD waveform monitor Preparation . Board extension : RC-86 board (front side) . Board extension : DIF-102 board (rear side) . 1 RV354 (B-4)/RC-86 → mechanical center (ENC LEVEL) . S811-1 (M-6)/RC-86 → ON . S811-2 (M-6)/RC-86 → OFF . S802 (M-4)/RC-86 → 525 . WF mo[...]

  • Page 60

    3-16 (E) HDCU-900 MM 3-5. SD Signal System Adjustment (HKCU-901) Preparation . Board extension : IF-789A/789P board (front side) . S101-1 (M-9)/IF-789A/789P → ON . S101-2 (M-9)/IF-789A/789P → SMPTE . S708-1 (M-8)/IF-789A/789P → ON (CLEAR) . S201 (M-9)/IF-789A/789P → OFF . S202 (M-8)/IF-789A/789P → ON . S705 (M-8)/IF-789A/789P → RGB . S7[...]

  • Page 61

    3-17 (E) HDCU-900 MM 3-5-1. VBS Output Level Adjustment Measures : SD waveform monitor, Vector monitor Preparation Board extension : VDA-57 board (rear side) Adjustment Procedure 1. SYNC level adjustment Measuring point : TP202 (B-6)/IF-789A/789P Adjusting point : 1 RV209 (C-6)/IF-789A/789P Specifications : A = 571 ± 3 mV (for UC) A = 600 ± 3 mV [...]

  • Page 62

    3-18 (E) HDCU-900 MM 3-5-3. WF Output Level Adjustment Measure : SD waveform monitor Preparation . The VBS output level adjustment (section 3-5-2) should be completed. . WF monitor select switch/MSU → ENC . Board extension : VDA-57 board (rear side) Adjustment Procedure 1. WF signal level adjustment Measuring point : WF OUT connector/VDA-57 Adjus[...]

  • Page 63

    3-19 (E) HDCU-900 MM 3-5-4. GRB Output Level Adjustment Measure : SD waveform monitor Preparation Board extension : VDA-57 board (rear side) Adjustment Procedure 1. G signal level adjustment-1 Measuring point : TP205 (D-8)/IF-789A/789P Adjusting point : 1 RV216 (D-7)/IF-789A/789P Specifications : A = 1000 ± 5 mV p-p (terminated at 75 Z ) (100% col[...]

  • Page 64

    3-20 (E) HDCU-900 MM 3-5-5. Y/R-Y/B-Y Output Level Adjustment Measure : SD waveform monitor Preparation . The GRB output level adjustment (section 3-5-4) should be completed. . Board extension : VDA-57 board (rear side) . S705 (M-8)/IF-789A/789P → YCD . S201 (M-8)/IF-789A/789P → OFF Adjustment Procedure 1. Measuring point : Y/G OUTPUT connector[...]

  • Page 65

    3-21 (E) HDCU-900 MM 5. R-Y signal level adjustment Measuring point : R-Y/R OUTPUT connector/VDA-57 Adjusting point : 1 RV213 (C-7)/IF-789A/789P Specifications : D = 700 ± 5 mV p-p (SET UP : ON) (75% (R-Y) color bar) (for UC) D = 525 ± 5 mV p-p (75% (R-Y) color bar) (for CE) 6. B-Y signal level adjustment Measuring point : B-Y/B OUTPUT connector/[...]

  • Page 66

    3-22 (E) HDCU-900 MM 1. Input Level Adjustment Adjustment Procedure Measuring point : TP405 (G-4)/IF-789A/789P Adjusting point : 1 RV401 (G-4)/IF-789A/789P Specifications : A = 1.56 ± 0.02 V p-p 2. Phase Adjustment Adjustment Procedure Measuring point : TP503 (G-1)/IF-789A/789P Adjusting point : 1 RV404 (L-3)/IF-789A/789P Specifications : B = 0 3.[...]

  • Page 67

    3-23 (E) HDCU-900 MM 4. Return Level Adjustment (Pr) Adjustment Procedure 1. CONFIG button/MSU → ON Set using MSU on the touch panel as follows. [ CCU] → [RET|SETTING] → RET1 : 2nd Slot (DIF-RET-1) 2. Measuring point : TP31/extension board (VDA-55) Measure level F. (about 1050 mV) 3. CONFIG button/MSU → ON Set using MSU on the touch panel a[...]

  • Page 68

    3-24 (E) HDCU-900 MM 3-6. HD Signal Input/Output Adjustment (HKCU-902) 3-6. HD Signal Input/Output Adjustment (HKCU-902) 3-6-1. Y/P B /P R Output Level Adjustment Measure : HD waveform monitor Preparation . Board extension : ADA-59 board (rear side) . BARS button/MSU → ON . S1 (F-2)/ADA-59 → C Adjustment Procedure 1. Y output level adjustment M[...]

  • Page 69

    3-25 (E) HDCU-900 MM 3-6. HD Signal Input/Output Adjustment (HKCU-902) 3-6-2. GBR Output Level Adjustment Measure : HD waveform monitor Preparation . The Y/P B /P R output level adjustment (section 3-6-1) should be completed. . Board extension : ADA-59 board (rear side) . S1 (F-2)/ADA-59 → 8 . BARS button/MSU → ON Adjustment Procedure 1. G mix [...]

  • Page 70

    3-26 (E) HDCU-900 MM 3-6. HD Signal Input/Output Adjustment (HKCU-902) 5. R mix level adjustment Measuring point : P R /R OUTPUT1 connector/ ADA-59 Adjusting point : 1 RV302 (L-4)/ADA-59 Specifications : Portion G and portion H must be flat (within 5 mV or less). 6. R signal level adjustment Measuring point : P R /B OUTPUT1 connector/ADA- 59 Adjust[...]

  • Page 71

    3-27 (E) HDCU-900 MM 3-6. HD Signal Input/Output Adjustment (HKCU-902) 3-6-4. A/D Conversion Level Adjustment Measure : Oscilloscope Note Do not connect anything to the VTR connector of the camera. Preparation . The Y/P B /P R output level adjustment (section 3-6-1) should be completed. . Board extension : VDA-55 board (HDC-900/950) . Board extensi[...]

  • Page 72

    3-28 (E) HDCU-900 MM 3-7. Video Signal Sytem Adjustment (HKCU-904) 3-7. Video Signal Sytem Adjustment (HKCU-904) 3-7-1. Main Clock (74 MHz) Duty Adjustment Measure : Oscilloscope (20 MHz BWLimit: ON) Preparation . Board extension : LC-41 board (front side) Adjustment Procedure Measuring point : TP1 (B-6)/LC-41 Adjusting point : 1 RV1 (B-5)/LC-41 Sp[...]

  • Page 73

    HDCU-900 MM SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer : Check the metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below . LEAKAGE TEST The AC leakage from any exposed metal part [...]

  • Page 74

    Printed in Japan Sony Corporation 2003. 6 16 B&P Company ©2000 HDCU-900 (UC, J, CE) HKCU-901 (UC, J, CE) HKCU-902 (SY) HKCU-903 (SY) HKCU-904 (SY) J, E 9-968-566-03[...]