English dropdown-ico

Sony MDS-S50 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Sony MDS-S50, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Sony MDS-S50 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Sony MDS-S50. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Sony MDS-S50 should contain:
- informations concerning technical data of Sony MDS-S50
- name of the manufacturer and a year of construction of the Sony MDS-S50 item
- rules of operation, control and maintenance of the Sony MDS-S50 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Sony MDS-S50 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Sony MDS-S50, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Sony service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Sony MDS-S50.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Sony MDS-S50 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    MDS-JE470 SPECIFICA TIONS SERVICE MANUAL MINIDISC DECK Model Name Using Similar Mechanism MDS-S50 MD Mechanism T ype MDM-7A Optical Pick-up T ype KMS-260B/260E US Model Canadian Model AEP Model UK Model E Model A ustr alian Model US and f oreign patents licensed form Dolby Laboratories Licensing Corporation. System MiniDi sc digit al aud io system [...]

  • Page 2

    2 MDS-JE470 SELF-DIA GNOSIS FUNCTION The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur , and error codes which show the error history in the test mode during servicing. For details on how to view error codes for the customer , refer to the following box in the instruction manual. F[...]

  • Page 3

    3 MDS-JE470 ITEMS OF ERR OR HISTOR Y MODE ITEMS AND CONTENTS Selecting the T est Mode Displa y op rec tm op play tm spdl rp tm retry err total err err history retry adrs er refresh tm change op change Histor y Displays the total recording time. When the total recording time is more than 1 minute, displays the hour and minute When less than 1 minute[...]

  • Page 4

    4 MDS-JE470 Description T able of Error Codes Error Code 10 12 20 21 22 23 24 30 31 40 41 42 43 50 51 Could not load Loading switches combined incorrectly T imed out without reading the top of PTOC Could read top of PTOC, but detected error T imed out without accessing UTOC T imed out without reading UTOC Error in UTOC Could not start playback Erro[...]

  • Page 5

    5 MDS-JE470 SECTION 1 SER VICE NO TES This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior . Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. CA UTION Use of controls or adjustments or performance of procedures other than those spe[...]

  • Page 6

    6 MDS-JE470 JIG FOR CHECKING BD BO ARD W A VEFORM The special jig (J-2501-196-A) is useful for checking the waveform of the BD board. The names of terminals and the checking items to be performed are shown as follows. GND : Ground I+3V : For measuring IOP (Check the deterioration of the optical pick-up laser) IOP : For measuring IOP (Check the dete[...]

  • Page 7

    7 MDS-JE470 Iop D A T A RECORDING AND DISPLA Y WHEN OPTICAL PICK-UP AND NON-V OLA TILE MEMOR Y (IC195 OF BD BO ARD) ARE REPLA CED The Iop value labeled on the optical pick-up can be recorded in the non-volatile memory . By recording the value, it will eliminate the need to look at the value on the label of the optical pick-up. When replacing the op[...]

  • Page 8

    8 MDS-JE470 OPTICAL PICK-UP BLOCK TYPE DISCRIMINA TION There are two types of the optical pick-up block in this model. These are compatible except for the laser power . Check the type of the optical pick-up block before replacement. Ajdust following items after replacing the optical pick-up block. • 5-6-2. Laser Power Check (See page 28) • 5-10[...]

  • Page 9

    9 MDS-JE470 CHECKS PRIOR TO PAR TS REPLA CEMENT AND ADJUSTMENTS Before performing repairs, perform the following checks to determine the faulty locations up to a certain extent. Details of the procedures are described in “5 Electrical Adjustments”. • 5-6-2. Laser power check (see page 28) • 5-6-3. Iop Compare (see page 28) • 5-6-4. Auto C[...]

  • Page 10

    10 MDS-JE470 Fig. 2 Reading the T est Mode Displa y (During playbac k) @@###**$$ Fluorescent display tube display @@ : Parts No. (name of area named on T OC) ### : Cluster ** : Sector $$ : T rack mode (T rack information such as copyright infor- mation of each part) RETR Y CA USE DISPLA Y MODE • In this test mode, the causes for retry of the unit[...]

  • Page 11

    11 MDS-JE470 Hexadecimal Bit Binar y Higher Bits Lower Bits 84218421 b7 b6 b5 b4 b3 b2 b1 b0 00000001 00000010 00000100 00001000 00010000 00100000 01000000 10000000 Hexa- decimal Details 01 02 04 08 10 20 40 80 Emphasis OFF Monaural This is 2-bit display . Normally 01. 01:Normal audio. Others:Invalid Audio (Normal) Original Copyright W rite prohibi[...]

  • Page 12

    12 MDS-JE470 SECTION 2 GENERAL This section is e xtracted from instruction manual. Parts Identification The i tems ar e ar ranged in al phabet ical o rder . Refer to the pa ges in dicate d in pare nthese s ( ) fo r deta ils. Main unit MENU/ NO YES AMS CLEAR PUSH ENTER REC INPUT REC MODE EJECT ST ANDBY TIMER PHONES PHONE LEVEL PC LINK ON/OFF SKIP TI[...]

  • Page 13

    13 MDS-JE470 SECTION 3 DISASSEMBL Y 3-1. DISASSEMBL Y FLO W • This set can be disassembled in the order shown below . SET 3-2 UPPER CASE (408226) 3-3 FRONT P ANEL SECTION 3-4 MAIN BO ARD 3-5 PT BOARD V OL-SEL BOARD (SP model) 3-6 MECHANISM DECK SECTION (MDM-7A) 3-7 O VER LIGHT HEAD (HR901) 3-11 OPTICAL PICK-UP (KMS-260B/260E) 3-7 BD BOARD 3-8 HOL[...]

  • Page 14

    14 MDS-JE470 3-2. UPPER CASE (408226) 1 Two screws (CASE 3TP2) 1 Two screws (CASE 3TP2) 1 Screw (CASE 3TP2) 2 Case (408226) 3-3. FR ONT P ANEL SECTION 4 Two screws (+BVTP3x8) 4 Two screws (+BVTP3x8) 6 Front panel 5 Claw 5 Claw 1 Wire (flat type) (17core) (CN3) 2 Connector (CN390) 3 Connector (CN830)[...]

  • Page 15

    15 MDS-JE470 3-4. MAIN BO ARD 3-5. PT BO ARD , VOL-SEL BO ARD (SP model) 6 Two screws (+BVTP3x8) 4 Two screws (+BVTP3x8) 5 screw (+BVTP3x8) 3 Connector (CN400) 2 Wire (flat type) (23core) (CN1) 1 Wire (flat type) (27core) (CN2) 7 MAIN board 6 Two screws (+BVTP3x8) (SP model) 3 Three screws (+PTTWH M3) 2 Connector (CN990) (SP model) 1 Connector (CN9[...]

  • Page 16

    16 MDS-JE470 3-6. MECHANISM DECK SECTION (MDM-7A) 3-7. O VER LIGHT HEAD (HR901), BD BO ARD 2 Two step screws (+BVTTWH M3) 2 Two step screws (+BVTTWH M3) 1 Harnes s 3 Mechanism deck 6 3 Head, over light (HP901) 4 Remove the solder (four portion) 4 Remove the solder (five portion) 5 Two screws (BTP2X6) 7 FLEXIBLE board (CN101) 8 BD board 1 Connector [...]

  • Page 17

    17 MDS-JE470 3-8. HOLDER ASSY 3-9. LO ADING MO T OR ASSY (M103) 5 3 6 Holder ASSY 2 Claw 4 Boss 4 Boss 1 Spring (holder), tension 2 Two screws (PWH1.7x2.5) 3 Motor ASSY, loading (M103) 1 Belt (loading)[...]

  • Page 18

    18 MDS-JE470 3 A A 1 Two screws (BTP2X6) 9 Two screws (PWH1.7X2.5) 0 Motor ASSY, sle d (M102) 7 Lever (CHG) 2 Guide (L) 6 Slider 8 Lever (head) 4 Slider (EJ) 5 Remove the claw. Shift the slider in the arrow direction. 1 FLEXIBLE board qa Optical pick-up (KMS-260B/260E) 7 Main shaft 6 Two screws (K2X6) 4 Screw (BTP2X6 ) 5 Base (BU-A) 3 Gear (SD) 2 S[...]

  • Page 19

    19 MDS-JE470 2 Spindle motor ASSY (M101) 1 Three screws (M1.7), tapping 3-12. SPINDLE MO TER ASSY (M101)[...]

  • Page 20

    20 MDS-JE470 Function name MENU/NO button YES button AMS Left or Right knob Push Function Cancel or move to top hierarchy Set Select Set submenu SECTION 4 TEST MODE 4-1. PRECA UTIONS FOR USE OF TEST MODE • As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is stop[...]

  • Page 21

    21 MDS-JE470 Displa y AUTO CHECK Err Display TEMP ADJUS LDPWR ADJUS Iop Write Iop NV Save EF MO ADJUS EF CD ADJUS FBIAS ADJUS AG Set (MO) AG Set (CD) TEMP CHECK LDPWR CHECK EF MO CHECK EF CD CHECK FBIAS CHECK ScurveCHECK VERIFYMODE DETRK CHECK 0920 CHECK Iop Read Iop Compare ADJ CLEAR INFORMA TION CPLA Y1MODE CREC 1MODE Details Automatic self-diagn[...]

  • Page 22

    22 MDS-JE470 “ CPLAY1 MID ” t “ CPLAY1 OUT ” t “ CPLAY1 IN ” “ CREC1 MID ” t “ CREC1 OUT ” t “ CREC1 IN ” 4-5-1. Operating the Continuous Pla yback Mode 1. Entering the continuous playback mode 1 Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.) 2 Rotate the l AMS L knob and dis[...]

  • Page 23

    23 MDS-JE470 Function G x M m REC MODE PLA Y MODE LEVEL/DISPLA Y/CHAR A REPEA T Contents Sets continuous playback when pressed in the STOP state. When pressed during continuous playback, the tracking servo turns ON/OFF . Stops continuous playback and continuous recording. The sled moves to the outer circumference only when this is pressed. The sled[...]

  • Page 24

    24 MDS-JE470 G X REC SYNC L.SYNC OVER B/1 A-/REP REC MODE DISC/LP2 SLEEP/SHUF MONO Servo OFF T racking servo ON Recording mode OFF CL V normal mode T racking offset cancel OFF Groove Low reflection CL V A CL V UNLOCK Contents When Lit When Off Display Servo ON T racking servo OFF Recording mode ON CL V low speed mode ABCD adjustment completed T rac[...]

  • Page 25

    25 MDS-JE470 SECTION 5 ELECTRICAL ADJUSTMENTS 5-1. PARTS REPLA CEMENT AND ADJUSTMENT If malfunctions caused by Optical pick-up such as sound skipping are suspected, follow the following check. Chec k before replacement Other faults are suspected. Check the threading mechanism, etc. Start NG NG NG OK OK OK Laser Power Check 5-6-2. (See page 28) 5-6-[...]

  • Page 26

    26 MDS-JE470 5-6-4. Auto Check (See page 29) Start YES NO NO NO NO NO NO NO NO YES YES YES YES YES YES YES Replace IC195 Replace OP or IO195 Replace IC101, IC195, or D101 5-11. Iop NV SA VE (See page 32) Replace OP , IC190, or IC195 Replace OP , IC102, IC190, or IC195 Replace OP , IC101, IC151, or IC195 Replace OP Replace the spindle motor End adju[...]

  • Page 27

    27 MDS-JE470 5-7. Initial setting of adjustment values 5-8. Recording of Iop information 5-9. TEMP ADJUST 5-10. Laser power adjustment 5-1 1. Iop NV Save 5-12. Traverse adjustment 5-13. Focus bias adjustment 5-16. Auto gain adjustment 5-6-4. AUTO CHECK 5-2. PRECA UTIONS FOR CHECKING LASER DIODE EMISSION T o check the emission of the laser diode dur[...]

  • Page 28

    28 MDS-JE470 5. Press the MENU/NO button and display “LDPWR CHECK” and stop the laser emission. (The MENU/NO button is effective at all times to stop the laser emission.) Note 1: After step 4, each time the YES button is pressed, the display will be switched between “LD 0.7 mW $ ”, “LD 6.2 mW $ ”, and “LD Wp $ ”. Nothing needs to be[...]

  • Page 29

    29 MDS-JE470 7. Press the YES button and display “EFB = VC A B Specification A = B MO-W”. 8. Observe the waveform of the oscilloscope, and check that the specified value is satisfied. Do not rotate the l AMS L knob. (W rite power traverse checking) (T rav erse Wa vef orm) 1 1. Press the YES button display “EF MO CHECK” The disc stops rotati[...]

  • Page 30

    30 MDS-JE470 5-6-8. C PLA Y Check MO Error Rate Chec k Checking Procedur e : 1. Load a continuously recorded test disc (MDW -74/GA-1). (Refer to “5-5. Using the Continuously Recorded Disc”.) 2. Rotate the l AMS L knob and display “CPLA Y1 MODE”. 3. Press the YES button and display “CPLA Y1 MID”. 4. The display changes to “C = AD = ”[...]

  • Page 31

    31 MDS-JE470 5-7. INITIAL SETTING OF ADJUSTMENT VALUE Note: Mode which sets the adjustment results recorded in the non-vola- tile memory to the initial setting value. However the results of the temperature compensation offset adjustment will not change to the initial setting value. If initial setting is performed, perform all adjustments again ex- [...]

  • Page 32

    32 MDS-JE470 7. Then, rotate the l AMS L knob and display “LDPWR CHECK”. 8. Press the YES button once and display “LD 0.9 mW $ ”. Check that the reading of the laser power meter become the speci- fied value. 9. Press the YES button once more and display “LD 7.0 mW $ ”. Check that the reading the laser power meter and digital volt meter [...]

  • Page 33

    33 MDS-JE470 1 1. Rotate the l AMS L knob until the waveform of the oscilloscope moves closer to the specified value. In this adjustment, waveform varies at intervals of approx. 2%. Adjust the waveform so that the specified value is satisfied as much as possible. (T rav erse W av eform) 12. Press the YES button, and save the adjustment results in t[...]

  • Page 34

    34 MDS-JE470 5-14. ERROR RA TE CHECK 5-14-1. CD Error Rate Chec k Checking Procedur e : 1. Load a check disc (MD) TDYS-1. 2. Rotate the l AMS L knob and display “CPLA Y1 MODE”. 3. Press the YES button twice and display “CPLA Y1 MID”. 4. The display changes to “C = AD = ”. 5. Check that the C error rate is below 20. 6. Press the MENU/NO [...]

  • Page 35

    35 MDS-JE470 NO TE: It is useful to use the jig. for checking the waveform. (Refer to Servicing Note on page 6.) [BD BO ARD] (SIDE B) D101 IC151 23 1 27 1 1 7 IC101 CN101 CN103 CN102 IC195 IC190 CN105 IC102 * NO TE 5-17. ADJUSTING POINTS AND CONNECTING POINTS [BD BO ARD] (SIDE A)[...]

  • Page 36

    36 MDS-JE470 SECTION 6 DIA GRAMS 6-1. CIRCUIT BO ARDS LOCA TION KEY -SW board DISPLA Y board BD board MAIN board PT board V OL-SEL board (SP model) • Abbreviation SP : Singapore model[...]

  • Page 37

    37 37 MDS-JE470 THIS NO TE IS COMMON FOR PRINTED WIRING BO ARDS AND SCHEMA TIC DIA GRAMS. (In addition to this, the necessary note is printed in each b lock.) For schematic diagrams. Note: • All capacitors are in µ F unless otherwise noted. pF: µµ F 50 WV or less are not indicated except f or electrolytics and tantalums. • All resistors are [...]

  • Page 38

    MDS-JE470 38 38 6-2. BLOCK DIA GRAMS – BD SECTION – F C B D A E I J J I B A C D E F DETECTOR J I A B C D E F LD PD LASER DIODE ILCC PD OPTICAL PICK-UP (KMS-260B/260E) AUTOMATIC POWER CONTROL Q121, 122 APC PD APCREF AT AMP B.P.F. WBL ADFM ADIN ADFG ABCD AMP ABCD FE TE SE F0CNT WBL 3T EQ COMMAND SWDT SCLK XLAT RFO RF AGC & EQ AGCI EQ RF RF AM[...]

  • Page 39

    MDS-JE470 39 39 – MAIN SECTION – X550 45.1584MHz LED DRIVE Q726 ROTARY ENCODER FL DRIVE Q767 D726 STANDBY A/D, D/A CONVERTER IC500 SDTO ADDT DADT, BCK, LRCK SDTI A B LINE AMP IC310 MUTING Q181, 281 MUTING CONTROL SWITCH Q380 REMOTE CONTROL RECEIVER IC781 OSC J300 ANALOG IN L R L R D382 D381 ANALOG OUT ADA,LATCH DAT P1 P2 G13 MUTE ADA,RESET CLK [...]

  • Page 40

    40 40 MDS-JE470 MAIN BOARD CN1 (Page 45) MAIN BOARD CN2 (Page 45) B A BD BOARD (SIDE B) 1 2 3 4 5 Ref. No . Location D101 A-1 Q101 B-1 Q131 C-1 Q132 B-1 Q133 B-1 Q134 B-1 • Semiconductor Location Ref. No. Location D181 D-3 D183 D-3 IC101 A-3 IC102 B-3 IC141 C-1 IC151 C-2 IC153 C-3 IC171 D-2 • Semiconductor Location Ref . No. Location IC181 D-3 [...]

  • Page 41

    MDS-JE470 41 41 6-4. SCHEMA TIC DIA GRAM – BD SECTION (1/2) – • See page 37 for W avef orms. • See page 52 for IC Pin Functions. • See page 50 for IC Bloc k Diagrams. (KMS - 260B/260E) BD BOARD (2/2) (Page 42) BD BOARD (2/2) (Page 42) BD BOARD (2/2) (Page 42)[...]

  • Page 42

    MDS-JE470 42 42 6-5. SCHEMA TIC DIA GRAM – BD SECTION (2/2) – • See pa g e 37 for Wa veforms. • See page 53 f or IC Pin Functions. • See pa ge 50 fo r IC Bloc k Diagrams. MAIN BOARD(1/2) CN2 (P age 43) MAIN BOARD(1/2) CN1 (P age 43) BD BOARD (1/2) (P age 41) BD BOARD (1/2) (P age 41) BD BOARD (1/2) (P age 41)[...]

  • Page 43

    MDS-JE470 43 43 6-6. SCHEMA TIC DIA GRAM – MAIN SECTION (1/2) – • See page 37 for W avef orms. • See page 56 for IC Pin Functions. • See page 51 f or IC Block Diagrams. C177 C277 C261 C161 C520 C490 C58 C491 C492 C501 C505 C515 C516 C517 C522 C524 C531 C532 C536 C601 C613 C680 L349 L506 L522 L523 L524 L668 R46 R53 R55 R87 R88 R92 R93 R94 [...]

  • Page 44

    MDS-JE470 44 44 6-7. SCHEMA TIC DIAGRAM – MAIN SECTION (2/2) – • See pa ge 51 for IC Bloc k Diagrams. R434 R407 C402 C412 C424 C442 R425 R424 C405 C401 C411 C406 C416 C423 C425 C431 C432 R420 R431 R912 R911 C441 R441 R443 R442 R406 JW 451 JW 452 C404 FB410 R423 D421 Q911 D401 D402 D403 D404 D411 D412 D461 D462 D466 D467 IC406 IC411 CN406 BT40[...]

  • Page 45

    MDS-JE470 45 45 DISPLAY BOARD CN701 (Page46) C BD BOARD CN102 (Page40) A (CHASSIS) BD BOARD CN103 (Page40) B MAIN BOARD PT BOARD CN921 (Page48) F 12 (12) 1-681-735- 2 3 4 5 6 7 8 9 10 11 12 A 1 B C D E F G H IC1 1 30 31 50 81 100 80 51 IC500 IC550 R51 JW121 R41 C58 C62 JW120 JW151 C426 R100 R90 R53 R88 R87 R95 JW127 R61 JW129 JW149 JW175 R97 JW154 [...]

  • Page 46

    MDS-JE470 46 46 6-9. PRINTED WIRING BO ARD – DISPLA Y SECTION – • See page 36 for Cir cuit Board Location. There are a fe w cases that the par t isn’t mounted in model is printed on diagram. C DISPLA Y BOARD 12 (12) 1-681-737- E KEY–SW BOARD 12 (12) 1-681-736- 3 2 1 54 l L X x MAIN BOARD CN3 (Page45) H A M M z FLUORESCENT INDICATOR TUBE 2[...]

  • Page 47

    MDS-JE470 47 47 6-10. SCHEMA TIC DIA GRAM – DISPLA Y SECTION – S712 S711 S704 S702 S701 R714 R713 R712 R705 R704 R703 R702 S705 R706 S714 S703 S706 S721 C765 C782 R782 R781 R775 R715 R716 S715 S716 C751 C753 C769 C761 C762 C763 C760 R767 R769 C764 C766 C767 CN701 R1726 S724 S722 R724 R723 R722 S723 S726 CN720 D726 Q726 R725 R726 IC781 Q775 D775[...]

  • Page 48

    MDS-JE470 48 48 6-11. PRINTED WIRING BO ARD – PO WER SECTION – • See page 36 f or Circuit Boar d Location. There are a fe w cases that the par t isn’t mounted in model is printed on diagram. PT BOARD VOL-SEL BOARD 12 (12) 1-681-734- MAIN BOARD CN400 (Page45) F * AC IN VOLTAGE SELECT 115V 230V 12 (12) 1-681-738- * NOT REPLACEABLE: BUILT IN T[...]

  • Page 49

    MDS-JE470 49 49 6-12. SCHEMA TIC DIA GRAM – PO WER SECTION – CN900 TR900 TR950 JW904 C952 C951 C923 C924 JW901 JW902 C910 RY910 LF900 CN921 EP900 CN990 CN950 S990 JW903 D910 2P JUMPER 0.1 0.1 0.1 0.1 0.0022 RELAY LINE FILTER EARTH PLATE 5P WIRE 5P 1SS133-72 AC IN 1 5 11 115V 230V VOLTAGE SELECTOR BUILT IN TRANSFORMER NOT REPLACEABLE: * POWER TR[...]

  • Page 50

    MDS-JE470 50 50 6-13. IC BLOCK DIA GRAMS IC101 CXA2523AR (BD BO ARD) IC151 CXD2662R (BD BO ARD) IC141 BH6511FS-E2 (BD BO ARD) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 123456789 10 11 12 13 14 15 16 GND VG IN4R IN4F VM4 OUT4F PGND4 OUT4R VM34 OUT3R PGND3 OUT3F VM3 IN3F IN3R PSB CAPA – CAPA+ IN2R IN2F VM2 OUT2F PGND2 OUT2R VM12 OUT1R PGND1 O[...]

  • Page 51

    51 MDS-JE470 IC500 AK4524 (MAIN BO ARD) IC440 M54641L (MAIN BO ARD) VCOM AINR AINL 2 1 3 VREF 4 TEST 7 XTI 9 XT ALE 10 XTO 8 SDTI 14 LRCK 11 BICK 12 SDTO 13 AGND 5 VA 6 A/D CONVERTER BLOCK D/A CONVERTER BLOCK CLOCK GENERA TOR & DIVIDER AUDIO INTERFACE CONTROLLER CDTI 15 CIF 18 CLKO 21 AOUTL+ 26 AOUTL– 25 DGND 24 VD 23 VT 22 AOUTR+ 28 AOUTR–[...]

  • Page 52

    52 MDS-JE470 6-14. IC PIN FUNCTION DESCRIPTION • IC101 CXA2523AR RF Amplifier (BD BO ARD) Pin No . Pin Name I/O Description I J VC A to F PD APC APCREF GND TEMPI TEMPR SWDT SCLK XLA T XSTBY F0CNT VREF EQADJ 3T ADJ Vcc WBLADJ TE CSLED SE ADFM ADIN ADAGC ADFG AUX FE ABCD BOTM PEAK RF RF AGC AGCI COMPO COMPP ADDC OPO OPN RFO MORFI MORFO I I O I I O [...]

  • Page 53

    53 MDS-JE470 MNT0 (FOK) MNT1 (SHCK) MNT2 (XBUSY) MNT3 (SLOC) SWDT SCLK XLA T SRDT SENS XRST SQSY DQSY RECP XINT TX OSCI OSCO XTSL DIN0 DIN1 DOUT DADTI LRCKI XBCKI ADDT DADT LRCK XBCK FS256 DVDD A03 to A00 A10 A04 to A08 A1 1 DVSS XOE XCAS A09 XRAS XWE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - 34 35 36 - 4[...]

  • Page 54

    54 MDS-JE470 Description Pin No . Pin Name I/O 48 49 50, 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 D1 D0 D2, D3 MVCI ASYO ASYI A VDD BIAS RFI A VSS PCO FILI FILO CL TV PEAK BOTM ABCD FE AUX1 VC ADIO A VDD ADR T ADRB A VSS SE TE DCHG TEST4 ADFG F0CNT XLRF CKRF DTRF APCREF TEST0 TRDR Data[...]

  • Page 55

    55 MDS-JE470 Description Pin No . Pin Name I/O 86 87 88 89 90 91 92 93 94 95 96 - 98 99 100 TFDR DVDD FFDR FRDR FS4 SRDR SFDR SPRD SPFD FGIN TEST1 to TEST3 DVSS EFMO O I O O O O O O O I (S) I — O T racking servo drive PWM output (+) +3V power supply (Digital) Focus servo drive PWM output (+) Focus servo drive PWM output (–) 176.4 kHz clock sign[...]

  • Page 56

    56 MDS-JE470 1 FLDT O Serial data signal output to the display driver . 2 FLCK O Serial clock signal output to the display driver . L: Active 3 A1-IN I A1 Control input. (Fixed at L) 4 SIRCS I Remote control input. 5 - 7 NC — Not used. 8 BYTE I Data bus changed input. (Connected to ground.) 9 CNVSS — Ground. 10 XIN-T I Not used . (open) 1 1 XOU[...]

  • Page 57

    57 MDS-JE470 40 ADA. LA TCH O Latch signal output to the AK4524. L: Active 41 EPN I Not used. (Fixed at L) 42 L : DINT1/H : CLIP — Not used. (open) 43 NC — Not used. 44 PROTECT I Recording-protection claw detection input from the protection detection switch. H: Protect 45 SCL O Clock signal output to the EEP-ROM. 46 CE O Not used. 47 EEP-WP O E[...]

  • Page 58

    58 MDS-JE470 81 STB O Strobe signal output to the power supply circuit. H: Power supply ON: L: standby 82 BEEP SW — Not used. 83 REC — Not used. 84 FLCS O Chip select signal output to the MSM9202 (IC760) 85, 86 D.VOL0,1 — Not used. 87, 88 JOG0, JOG1 I Jog dial pulse input from the rotary encoder . 89 IOP I Optical Pick-up voltage (current) de[...]

  • Page 59

    59 MDS-JE470 7-1. CHASSIS SECTION Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may have some differences from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be a[...]

  • Page 60

    60 MDS-JE470 7-2. FR ONT P ANEL SECTION Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 59 54 54 54 54 63 54 54 60 62 61 64 51 57 56 54 65 not supplied FL750 51 X-4953-710-1 PANEL ASSY , FRONT ...(BLACK) (AEP ,UK,HK,SP ,AUS) 51 X-4953-711-1 PANEL ASSY , FRONT ...(SIL VER) (AEP ,UK) 51 X-4953-712-1 PANEL ASSY , FRONT ...([...]

  • Page 61

    61 MDS-JE470 7-3. MECHANISM SECTION-1 (MDM-7A) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks #2 304 305 306 302 301 307 305 320 302 311 319 312 310 309 314 313 315 316 318 303 317 308 * 301 4-996-267-01 BASE (BU-D) 302 4-231-319-01 SCREW (2X6) CZN, +B (P) TRI 303 4-227-007-01 GEAR (SB) 304 4-227-025-01 BEL T (LOADING) [...]

  • Page 62

    62 MDS-JE470 7-4. MECHANISM SECTION-2 (MDM-7A) The components identified by mark 0 or dotted line with mark 0 are critical for saf ety . Replace only with part number specified. Les composants identifi é s par une marque 0 sont critiques pour la s é curit é . Ne les remplacer que par une pi è ce portant le num é ro sp é cifi é . Ref. No. Par[...]

  • Page 63

    63 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 SECTION 8 ELECTRICAL P ARTS LIST Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the[...]

  • Page 64

    64 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 BD IC190 8-759-460-72 IC BA033FP-E2 IC195 8-759-640-41 IC BR24C08F-E2 <JUMPER RESISTOR> JW201 1-216-295-91 SHORT 0 JW202 1-216-295-91 SHORT 0 JW203 1-216-295-91 SHORT 0 JW903 1-216-295-91 SHORT 0 JW904 1-216-295-91 SHORT 0 <COIL> L101 1-500-245-11 F[...]

  • Page 65

    65 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 DISPLA Y KEY-SW A-2007-907-A DISPLA Y BOARD, COMPLETE (US,CND) A-2007-911-A DISPLA Y BOARD, COMPLETE (AEP ,UK,HK,AUS) A-2007-915-A DISPLA Y BOARD, COMPLETE (SP) ************************* 4-212-590-22 HOLDER (FL) 4-949-935-41 CUSHION (FL) <CAP ACITOR> C709[...]

  • Page 66

    66 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 MAIN C62 1-164-159-11 CERAMIC 0.1uF 50V C87 1-162-306-11 CERAMIC 0.01uF 30% 16V C88 1-162-306-11 CERAMIC 0.01uF 30% 16V C89 1-162-294-31 CERAMIC 0.001uF 10% 50V C100 1-126-964-11 ELECT 10uF 20% 50V C111 1-162-290-31 CERAMIC 470PF 10% 50V C112 1-128-551-11 ELECT[...]

  • Page 67

    67 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 MAIN <FERRITE BEAD> FB460 1-414-093-11 FERRITE 0UH FB465 1-414-093-11 FERRITE 0UH <IC> IC1 6-800-020-01 IC M30803MG-107FP IC310 8-759-634-51 IC NJM4558D IC360 8-759-634-51 IC NJM4558D IC370 8-759-634-51 IC NJM4558D IC401 8-759-445-59 IC BA033T IC406[...]

  • Page 68

    68 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MDS-JE470 MAIN The components identified by mark 0 or dotted line with mark 0 are critical for saf ety . Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce por tant l[...]

  • Page 69

    69 MDS-JE470[...]

  • Page 70

    MDS-JE470 REVISION HIST OR Y Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. V er . Date Description of Revision 1.0 2001.05 New[...]