Sony RM-VL1000 manual

3-244-192- 12 (1) Integrated Remote Commander Operating Instructions © 2002 Sony Corporation RM-VL1000[...]

2 WARNING T o prevent fir e or shock hazard, do not expose the unit to r ain or moisture . T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . WARNING Y ou are cautioned that any changes or modifications not expressly appr oved in this manual could void your authority to operate this equipment. For the[...]

3 Featur es The RM-VL1000 Remote Commander provides centralized control of all your A V components from a single r emote commander and saves the trouble of operating differ ent A V components with differ ent remote control devices. The following are its main features. Customizing 180 labels of control keys in the dot matrix LCD with dot matrix make[...]

4 T able of Contents Getting Started Location and Function of Controls .............................................................. 6 Installing the Batteries ................................................................................ 7 When to replace the batteries ........................................................................... [...]

5 Using Other Functions Locking the Controls — Hold Function ...................................................... 62 Adjusting the Automatic-Off Time of the Backlight of the Display Window ....................................................................................... 63 Setting the K ey-T ouch Beep .....................................[...]

6 Location and Function of Contr ols 1 LCD display window 2 COMPO (component) button 3 SYSTEM button 4 TIMER button 5 SCROLL button 6 SET button 7 Player Control buttons 8 PIP button 9 TV/VIDEO button 0 DISPLA Y button qa MENU button qs VOL (volume) +/– buttons qd MUTING button qf Label Select button qg POWER button qh Number buttons qj ENT (ente[...]

7 Installing the Batteries Slide open the battery compartment lid and insert two size AA (R6) alkaline batteries (not supplied). Be sure to line up the + and – on the batteries with the + and – on the battery compartment. When to replace the batteries Batteries for remote contr ol operation and backlight (two size AA (R6) batteries) Under norma[...]

8 Setting the Clock Setting the clock for the first time after installing batteries SET CLOCK SUN 12:00 AM STD TIME DS TIME --:-- COMPO SYSTEM TIMER SCROLL SET REC VIDEO1 VIDEO2 AUX TUNER CD T APE MD TV DVD MENU MUTING RECALL VOL CH GUIDE PHONO POWER 1,7 3 4-6 2 For the first time after installing batteries, the display for component operation appe[...]

9 4 Select the day of the week by pressing the Joystick toward or . The selected day of the week flashes. SUN : Sunday MON : Monday TUE : T uesday WED : W ednesday THU : Thursday FRI : Friday SA T : Saturday Then press the Joystick towar d . The day of the week is set. “12” and “AM” flash. Note If you press the Joystick towar d , the day of[...]

10 5 Set the hour (AM or PM) by pressing the Joystick toward or . Each time the Joystick is pressed towar d or , the hour changes by one. The selected hour (AM or PM) flash. Then press the Joystick towar d . The hour is set. “00” (minute) flashes. Note If you press the Joystick towar d , the hour and AM (or PM) ar e set and the setting mode ret[...]

11 7 Press the SET button. W ith a beep sound, the day of the week, the hour , and the minute are set, and the clock starts from 0 seconds. The Commander enters the setting mode. If you press the SET button again The display for component operation appears. Note If you press the SET button in steps 4-6, the clock setting is confirmed and starts for[...]

12 2 Select “CLOCK” by pressing the Label Select button. The Commander enters clock setting mode. “CLOCK” and the current time setting is displayed on the LCD display . The time mode (STD TIME or DS TIME) currently set stays lit, and the other flashes. 3 T o change the time mode, select the time mode which flashes (STD TIME or DS TIME) by p[...]

13 Example: T o set up a Philips’ TV 1 See the tables in the supplied “ Component Code Numbers, ” and find the four-digit code number for the desired component. If more than one code number is listed, use the number that is listed first. For example, to set up a Philips TV , you would use the code number 8056. The first digit of the component[...]

14 Setting the Code for Preset Audio and Visual Components (continued) 2 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 3 Select “ PRESET ” by pressing the Label Select button. “ PRESET ” appears on the LCD display , and component names are displayed on the labels. SET PRESET LEARN LABEL CLOCK [...]

15 When the desired component is selected, the component name (in this case, TV), and the four-digit component code number previously set for the component are displayed. 5 Press the four -digit component code number by pressing the number buttons followed by the ENT button. Example: T o enter “ 8056 ” Input “ 8, ” “ 0, ” “ 5, ” “[...]

16 Checking if the code number works 1 When the display for component operation appears (if not, press the SET button repeatedly), press the COMPO button. “ COMPO ” appears on the LCD display , and component names are displayed on the labels. T o change the labels, press the SCROLL button repeatedly . Each time the SCROLL button is pressed, the[...]

17 Finding a component code with the Search function Y ou can find a code number available for a component that doesn ’ t have one in the supplied “ Component Code Numbers. ” Before starting the Sear ch function Set each component to the following status to enable the Search function. TV , AMP: Power -on CD, MD, T APE, DA T : Power-on with a [...]

18 SET PRESET LEARN LABEL CLOCK SET PRESET TV SAT CABLE DVD SET PRESET TV SAT CABLE DVD Setting the Code for Preset Audio and Visual Components (continued) 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Select “ PRESET ” by pressing the Label Select button. “ PRESET ” appears on the LCD dis[...]

19 Continued Note T o search for component code numbers in another category , return to Step 3, or input a four-digit component code number of another category (for example, a code number which begins with “ 3 ” , “ 4 ” , etc.) before Step 4. 5 Aim the Commander at the component and press the POWER button. When the remote contr ol signal is[...]

20 3 Select “ CLEAR ” by pressing the Label Select button. 4 Select “ COMPO ” by pressing the Label Select button. Component names are displayed on the labels. T o change the labels, press the SCROLL button repeatedly . Each time the SCROLL button is pressed, the labels change as in Step 4 on page 14. SET POWER ON COPY CLEAR SYSDELAY SET CL[...]

21 Oper ating Y our Components with the Remote Commander If you operate a non-Sony component, make sure you set the component code first (page 13). Example: T o play VCR1 1 When the display for component operation appears (if not, press the SET button repeatedly), press the COMPO button. “ COMPO ” appears on the LCD display , and component name[...]

22 COMPO VCR1 DVR CD AMP 10:00 AM VCR1 ANT SW SEARCH t SEARCH T PLAYx2 10:00 AM Operating Y our Components with the Remote Commander (continued) 2 Select the component (in this case, VCR1) to be operated by pressing the Label Select button. The labels for operating the selected component are displayed. T o change the labels, press the SCROLL button[...]

23 T o control the volume Press the VOL +/ – buttons to control the volume, and the MUTING button to mute. When you select a visual component, the TV ’ s volume will be controlled, and when you select an audio component, the amplifier ’ s volume will be controlled. Y ou can change this setting also (page 30). Notes • If you have programmed [...]

24 Example: T o program the N (Play) signal of your component to the VCR1 N (Play) button of the Commander 1 Place the RM-VL1000 head to head with your component ’ s remote control. 2 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 3 Select “ LEARN ” by pressing the Label Select button. about 2 ?[...]

25 T o change the labels, press the SCROLL button repeatedly . Each time the SCROLL button is pressed, the labels change as follows. Note on the flashing display The labels that are alr eady preset for that component flash twice while those that are not pr eset flash once. T o change the name of the Labels Follow the procedur e on page 27. If you p[...]

26 When you teach the REC (record) signal If you have to press two buttons at the same time (for example, z and N ) to start recor ding on your cassette deck or VCR, teach the REC signal as below . In Step 5 (page 25), press only the REC button. Then press the two buttons on your component ’ s remote control in Step 6. Y ou cannot teach the REC s[...]

27 SET LEARN VCR1 PLAYx2 The Commander enters the Label Input mode. 3 Input digits or characters on the label by pressing the Joystick toward , , and . The cursor flashes at the left end of the label. Begin inputting digits or characters from the left. Pr ess the Joystick toward or repeatedly until you obtain the desired digit or character . Each t[...]

28 Notes on learning the signals of an air - conditioner About seasonal adjustments If you change the settings of the air-conditioner for the season, you have to program the r emote control signals of the new settings on the Commander . If the power -on/off operation does not work correctly The air-conditioner may not be turned on or off pr operly [...]

29 Changing or erasing the function of a taught label or button T o change the learned function, clear it first and perform learning again. T o clear the learned function of a label or button After Step 4 (page 24), while pressing the button or the Label Select button corresponding to the label that you want to erase, press the SCROLL button. “ C[...]

30 However , if your visual components are connected to an audio system, you probably hear TV or VCR sound from the loudspeakers via your amplifier , not from your TV speakers. In this case, you need to change the factory preset so that you can control the volume of your visual components without first having to switch to the amplifier . T o change[...]

31 SET VOLUME VISUAL TV AUDIO AMP COMPO SET VOLUME TV SAT CABLE DVD VISUAL SET SYSTEM TIMER CH MACRO VOLUME 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Press the SCROLL button once to display “ VOLUME ” on one of the labels. 3 Select “ VOLUME ” by pressing the Label Select button. 4 T o [...]

32 Controlling the V olume of Visual Components Connected to an Audio System (continued) COMPO SET VOLUME AMP R R R VISUAL The component names are displayed on the labels. T o change the labels, press the SCROLL button. The components with a preset code number beginning with “ 4 ” (amplifier) flash. 7 Select the component of which volume settin[...]

33 8 Press the SET button. The display returns to the previous one. Notes • If you set a TV or an amplifier for volume control setting to the TV or AMP label displayed by default, the signal of the preset component will be transmitted. If you program any signal for the VOL or MUTING button of each component by “ learning ” , the learned signa[...]

34 Executing a Series of Commands — System Control Functions W ith the System Control function, you can program a series of operating commands, and execute them simply as follows. 1 When the display for component operation appears (if not, press the SET button repeatedly), pr ess the SYSTEM button. 2 Select the System Macro number label by pressi[...]

35 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Press the SCROLL button once to display “ SYSTEM ” on one of the labels. 3 Select “ SYSTEM ” by pressing the Label Select button. “ SYSTEM ” and “ COMPO ” flash. 4 Select “ SYSTEM ” by pressing the Label Select button. SYSTEM SET[...]

36 Executing a Series of Commands — System Control Functions (continued) The selected component name is displayed on the bottom of the LCD display , and the labels for the operation of the component are displayed. T o change the labels, press the SCROLL button repeatedly . T o select another component, press the COMPO button. SYSTEM SET SYSTEM2 P[...]

37 Continued Notes • If you interrupt the procedur e at any point for over two minutes, the setup procedur e will be canceled. In this case, set the entire pr ogram from the beginning. • If you change the component code number (page 13) or program a new signal by learning (page 23) on a label that has been programmed in the series of commands o[...]

38 Executing a Series of Commands — System Control Functions (continued) T o clear the System Macro of a label In Step 5 (page 35), while pressing the Label Select button corresponding to the label that you want to erase, press the SCROLL button. (The labels for which the System Macro is programmed stay lit.) “ CLEAR OK ” appears and the Syst[...]

39 SET POWER ON COPY CLEAR SYSDELAY T o clear progr ammed commands for a specific System Macro number label Y ou can clear the System Macro and the character contents you have programmed for a label. 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Press the SCROLL button twice to display “ CLEAR ?[...]

40 Progr amming a series of commands for the component labels Y ou can also program a series of operating commands (component macro) for the component labels (up to 32 steps). T o execute a series of operating commands for a component label, proceed as follows. 1 When the display for component operation appears (if not, press the SET button repeate[...]

41 SYSTEM COMPO SET SYSTEM TV SAT CABLE DVD SYSTEM SET SYSTEM COMPO Continued T o clear the component macro of a label In Step 2 (page 41), while pressing the Label Select button corresponding to the label that you want to erase, press the SCROLL button. (The labels for which a series of commands is programmed stay lit.) “ CLEAR OK ” appears an[...]

42 Changing the interval between operation steps Y ou can control the interval fr om 150- 900 ms. 1 Keep the SET button pressed for mor e than a second. 2 Press the SCROLL button twice to display “ SYSDELA Y ” on one of the labels. 3 Select “ SYSDELA Y ” by pressing the Label Select button. 4 Select “ INTER V AL ” by pressing the Label [...]

43 SET SYSDELAY TIME INTERVAL COMPO SET SYSDELAY 0sec 1sec 2sec TIME COMPO SET SYSDELAY 0sec 1sec 2sec TIME 4 Press the SET button. The display returns to Step 2. Changing the component macro e xecuting time 1 Follow the procedur e of Steps 1-3 on page 42. 2 Select “ TIME ” by pressing the Label Select button. The current component macr o execu[...]

44 Adding an Extr a Function to the Component Labels Progr amming the Power -On command of a selected component (for Sony components only) When using Sony components, you can program the Power -On signal for each component on a component label. Y ou can select the desired component and turn it on by just selecting that label after pressing the COMP[...]

45 5 Press the SET button. The display returns to the previous one. T o clear the Power -On command Follow the same procedur e as Steps 1- 5 on pages 44- 45. The selected component name appears on the bottom of the LCD display . A beep sound is heard, and “ OFF ” lights. Note If the component code of a non-Sony product has been set for a compon[...]

46 COMPO SYSTEM TIMER SCROLL SET REC VIDEO1 VIDEO2 AUX TUNER CD TAPE MD TV DVD MENU MUTING RECALL VOL CH GUIDE PHONO POWER 1,6 2 4,5 3 Assigning Other Components to the Component Labels Copying the settings of a component label to another label Y ou can copy the entire settings of a component label. The settings of the component code (page 13), the[...]

47 SET COPY TV SAT CABLE DVD SET COPY SAT R R R DVD The selected component name appears at the bottom of the LCD display . 5 Select the component to which the contents are to be moved by pressing the Label Select button. (T o change the labels press the SCROLL button r epeatedly .) The selected component name appears on the first label of the LCD d[...]

48 Selecting a Channel with a Single Label — Channel Macro Function Y ou can program the Channel Macro function of the components of which the first digit of the four- digit preset component code number is 3 (SA T , DVR and a digital cable box), 8 (TV) or 9 (CABLE). And you can program the Channel Macro function for the macro labels for a compone[...]

49 Continued SET CH MACRO TV SAT CABLE DVD SET CH MACRO PIP SWAP PIP MOVE PIP CH+ PIP CH- TV 5 Select the macro label by pressing the Label Select button. The selected label stays lit. Other labels disappear . If you select the label for which the Channel Macro function cannot be programmed The ‘NG’ sound is heard. 6 Press the number buttons fo[...]

50 Selecting a Channel with a Single Label — Channel Macro Function (continued) 7 Press the SET button. The display returns to the previous one. Note Y ou cannot program the Channel Macro function for a macr o label that has “ learned ” a signal. T ry again with another macro label, or clear the “ learned ” signal (page 29) and program th[...]

51 Setting the Timer Up to 12 timer setting programs can be set on this commander . Y ou can program the timer setting of the day of the week, the hour , the minute and the contents of the program (T imer Macro) weekly or daily . Y ou can set each program of the timer to be executed or not. There ar e two ways to set the timer , as shown. - Setting[...]

52 Setting the Timer (continued) 5 Select “ SETUP ” by pressing the Label Select button. “ SUN, ” “ 12:00 AM, ” and “ MACRO ” are displayed. If the day of the week and the time for the timer program ar e set in this setting mode, or if you try changing the program already set (page 56), the set contents are displayed. 6 Select the f[...]

53 SUN : Sunday MON : Monday TUE : T uesday WED : W ednesday THU : Thursday FRI : Friday SA T : Saturday MON-SA T : from Monday to Saturday MON-FRI: fr om Monday to Friday SUN SA T : Sunday and Saturday EVER YDA Y : daily timer Then press down the Joystick to decide the day(s). Each time the Joystick is pressed towar d or , the display of day(s) of[...]

54 If you want to program the System Macro data for the timer Press the SYSTEM button. System macro numbers ar e displayed on the labels. Select the system label of which information you want to program for the timer . Go to Step 12. 11 Press the Label Select button or other button on the Commander of which the function you want to program as a ste[...]

55 Continued Notes • When using the timer setting on this Commander , only one setting can be assigned to one program. If you want to set the timer to turn on at a programmed time, and to set the timer to turn off at another time, program the two settings separately . • If there ar e some programs set to be executed at the same time, they start[...]

56 Changing the progr am already set or changing another progr am that you select 1 Follow Steps 1 - 4 on page 51- 52. 2 Select “ COPY ” by pressing the Label Select button. If you want to change the program alr eady set, go to Step 5 without pressing the COPY key . The program numbers appear . Numbers which have the timer setting information f[...]

57 PROG4 EVERYDAY 11:30 AM OK? NG? MacroCLR SET Continued PROG4 ON/OFF TEST SETUP COPY SET 6 Press the Label Select button of the label of which contents you want to change. Day: See Step 6 on page 52. T ime: See Step 7 on page 53. MACRO: The display appears as below . 7 Select “ OK? ” by pressing the Label Select button. W ith a beep sound, th[...]

58 Setting the Timer (continued) T o check the execution of the timer progr am 1 Follow Steps 1 - 4 on page 51 - 52. 2 Select “ TEST ” by pressing the Label Select button. Y ou can check the timer program setting by transmitting the T imer Macro signals. 3 Press the SET button. The display returns to the pr evious one. PROG4 ON/OFF TEST SETUP C[...]

59 T o switch quickly the timer standby mode to on or off using the TIMER button 1 When the display for component operation appears (if not, press the SET button repeatedly), press the TIMER button. “ TIMER ” and the program numbers appear . (T o change the labels, press the SCROLL button repeatedly .) The program number of which the standby mo[...]

60 Setting the Timer (continued) T o clear timer settings progr ammed for a specific progr am number label 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Press the SCROLL button twice to display “ CLEAR ” on one of the labels. 3 Select “ CLEAR ” by pressing the Label Select button. SET POWE[...]

61 4 Select “ TIMER ” by pressing the Label Select button. The timer program numbers are displayed on the labels. T o change the labels (PROG 1- 12), press the SCROLL button repeatedly . 5 Select the program number of which timer contents you want to erase by pressing the Label Select button. While erasing When erasing finishes, “ COMPLETE ?[...]

62 Using Other Functions Locking the Contr ols — Hold Function T o prevent accidental operation, you can lock all the buttons with the Hold function. However , the timer functions while the controls are locked. While pressing the POWER button, press the SCROLL button. W ith a beep sound, “ LOCK ” appears, and every LCD display disappears exce[...]

63 0sec 5sec 10sec 20sec 30sec 40sec 50sec 60sec Adjusting the Automatic-Off Time of the Backlight of the Display Window The Commander is preset at the factory to brighten the backlight, and to switch off the backlight automatically if you do not operate for more than 5 seconds. T o change this setting, perform the following procedur e. Y ou can ad[...]

64 Setting the K ey- T ouch Beep The Commander is preset at the factory to turn on the key-touch confirmation beep. Y ou can turn on or off the key-touch confirmation beep. 1 While pressing the POWER button, press the VOL+ button to turn on the key touch beep. 2 While pressing the POWER button, press the VOL – button to turn off the key touch bee[...]

65 Changing the Names of the Labels on the Display Y ou can change the display of the component names, the function displays of components, the system macro numbers (SONY OFF , SYSTEM2 - 12) and timer program numbers (PROG1 - 12) on the labels to the most suitable name using up to 8 characters or digits. COMPO SYSTEM TIMER SCROLL SET REC VIDEO1 VID[...]

66 Changing the Names of the Labels on the Display (continued) 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . 2 Select “ LABEL ” by pressing the Label Select button. The Commander enters the Label Input mode. SET PRESET LEARN LABEL CLOCK SET LABEL COMPO SYSTEM TIMER 3 Select the label (COMPO, SYS[...]

67 SYSTEM SET LABEL SONY OFF SYSTEM2 SYSTEM3 SYSTEM4 The Commander enters the Label Input mode of the system macro name. Go to Step 4. TIMER: Displays timer program numbers. T o change the labels (PROG1 - 12), press the SCROLL button. Select the timer program number (for example, PROG4) of which name you want to change by pressing the Label Select [...]

68 Erasing All the Settings Y ou can erase all the settings to reset the Commander to its factory settings. COMPO SYSTEM TIMER SCROLL SET REC VIDEO1 VIDEO2 AUX TUNER CD T APE MD TV DVD MENU MUTING RECALL VOL CH GUIDE PHONO POWER 2 5 3 4 1,6 1 Keep the SET button pressed for mor e than a second. “ SET ” appears on the LCD display . The Commander[...]

69 5 Select “ YES?, ” by pressing the Label Select button. While erasing When erasing finishes, “ COMPLETE ” is displayed with a beep sound. The Commander is reset to its factory settings. The display returns to Step 4. If you select “ NO? ” The display returns to Step 4. 6 Press the SET button. The display returns to the pr evious one.[...]

70 Specifications Operating distance Approx. 32.8 ft. (10 meters) (varies depending on components of different manufactur ers) Power requir ements Remote control and backlight: T wo size AA (R6) batteries Battery life Approx. 5 months (varies depending on frequency of use) Dimensions Approx. 2 3 / 4 × 8 5 / 8 × 1 3 / 16 in. (w × h × d) (69 × 2[...]

71 T r oubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 7), then check the items below . Remedy • Go closer to the component. The maximum operating distance is approximately 32.8 ft. (10 m). • Check that you are aiming the Commander directly at the component, and that there are no obs[...]

72 T roubleshooting (continued) Symptom “ NG ” flashes twice. The ‘ NG ’ sound is heard twice. “ NG ” appears during learning. “ NG ” appears if you try to copy the settings of the component label to another component label. A system control program does not function correctly. Remedy • Learned signals or the Channel Macro functio[...]

73 For the customers in the U .S.A. Customer Support Information After you have read thr ough this manual, if you still cannot get the Remote Commander to work properly , call the Sony Customer Support Helpline at 1-800- 822-2217. Symptom The component set to be operated by the timer of the Commander does not function as expected. The timer program[...]

74 Appendix T able of Preset Functions Note There may be some components or functions that cannot be operated with this Commander . KEY DISPLAY PIP CH + PIP CH – PIPINPUT PIPSTILL PIP OFF MAIN/SUB NORMAL AU MODE PIC MODE WIDE FUNCTION To change the TV channel in the “ window ” picture upwards To change the TV channel in the “ window ” pic[...]

75 * 1 The operation of the built-in DVR or the video on demand KEY DISPLAY POWER 1 – 9, 0, ENT TV/VIDEO DISPLAY GUIDE * 1 m * 1 N * 1 M * 1 REC * 1 x * 1 X MENU SA T (Digital Satellite) FUNCTION To turn the power on/ off To change the channel For example, to change to channel 5, press 0 and 5 (or, press 5 and ENTER) To switch the output of the S[...]

76 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENT TV/VIDEO DISPLAY FAVORITE * 2 m * 2 N * 2 M * 2 REC * 2 x * 2 X MENU Digital cable bo x FUNCTION To turn the power on/ off To change the channel (for example, to change to channel 5, press 0 and 5, or press 5 and ENT) To switch the output of the SAT receiver to the TV (When[...]

77 DVD KEY DISPLAY POWER 1 – 9, 0 PIP ENT DISPLAY RECALL MENU OK (Joystick) m N M x X FUNCTION To turn the power on/ off Number buttons: To set items selected from the screen To select numbers 10 and above To enter a setting or to set items selected from the screen To show the current play status on the screen To return to the last previous scree[...]

78 T able of Preset Functions (continued) VCR1, VCR2 KEY DISPLAY POWER 1 – 9, 0, ENT TV/VIDEO DISPLAY MENU OK (Joystick) GUIDE m N M FUNCTION To turn the power on/ off To change the channel (for example, to change to channel 5, press 0 and 5, or press 5 and ENT) To change the input mode To activate the on-screen display To call up the MENU displa[...]

79 KEY DISPLAY POWER 1 – 9, 0, ENT TV/VIDEO DISPLAY GUIDE m N M REC x X MENU DVR (Digital video recor der) FUNCTION To turn the power on/ off To change the channel (for example, to change to channel 5, press 0 and 5, or press 5 and ENT) To switch the output of the SAT receiver to the TV (When connecting a TV cable or antenna to the receiver, the [...]

80 T able of Preset Functions (continued) CD KEY DISPLAY POWER 1 – 9, 0 PIP ENT RECALL DISPLAY SLEEP m N M x X CH + CH – CONTINUE SHUFFLE PROGRAM REPEAT DISC TRACK GROUP EDIT EJECT DSP MODE DSP OFF FADER FUNCTION To turn the power on/ off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on t[...]

81 KEY DISPLAY POWER 1 2 3 4 5 6 7 8 9 0 DISPLAY MENU RECALL SLEEP GUIDE AMP FUNCTION To turn the power on/ off To select the input source: VIDEO 1 To select the input source: VIDEO 2 To select the input source: AUX To select the input source: TUNER To select the input source: CD To select the input source: TAPE To select the input source: MD To se[...]

82 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0 PIP ENT RECALL DISPLAY SLEEP m N M REC x X CH + CH – CONTINUE SHUFFLE PROGRAM REPEAT DECK A DECK B REC MODE CD SYNC EJECT FADER SCROLL MD FUNCTION To turn the power on/ off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions o[...]

83 T APE A, T APE B KEY DISPLAY POWER m N M REC x X TV/VIDEO DISPLAY RECALL CH + CH – DOLBY NR REC LEV+ REC LEV – REC MUTE CD SYNC FADER C.RESET FUNCTION To turn the power on/ off To rewind To play To fast-forward To record, press N while pressing REC. First release N , then release REC. To stop To pause To reverse To change the display mode To[...]

Sony Corporation Printed in China Index A Automatic-Off of the backlight 62 B Backlight Automatic-Off 62 Batteries 7 C, D Changing name of the label 27, 37, 50, 56, 67 changing interval 42 CH (channel) +/ – button 6 Channel Macro function 48 Clearing/Changing contents programmed for a component label 19 Channel Macro function 50 learned signal 29[...]