Go to page of
Similar user manuals
-
Printer
Star Micronics TSP100LAN
2 pages 1.67 mb -
Printer
Star Micronics NR-10
128 pages 5.82 mb -
Printer
Star Micronics PT-10Q
36 pages 1.11 mb -
Printer
Star Micronics Multi-Font NX-2415
134 pages 6.08 mb -
Printer
Star Micronics TSP600
113 pages 0.59 mb -
Printer
Star Micronics XR-1020
110 pages 4.85 mb -
Printer
Star Micronics ZA-250
176 pages 5.43 mb -
Printer
Star Micronics 4000
100 pages 1.65 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Star Micronics NX-2430, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Star Micronics NX-2430 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Star Micronics NX-2430. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Star Micronics NX-2430 should contain:
- informations concerning technical data of Star Micronics NX-2430
- name of the manufacturer and a year of construction of the Star Micronics NX-2430 item
- rules of operation, control and maintenance of the Star Micronics NX-2430 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Star Micronics NX-2430 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Star Micronics NX-2430, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Star Micronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Star Micronics NX-2430.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Star Micronics NX-2430 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
USERS M A NX-2430w,-m DOT MATRIX PRINTER Z B 80825520[...]
-
Page 2
NX-2430 M U U S M A N O INT E F S A[...]
-
Page 3
Fed e Commun i Com m Ra d Freq u Inter f St a Th i equipr n h a b e tes t a n fn u t cm n w i t I i f a C l B d i d e p u 1 Pa r 1 o F C Rul e Th e li m m des i [ pr o rea s pr o a g h a intert’er e i a resicfe n install a ‘r h equ i gene r u s a c r a r t ’ cner g am l i f n o insta l a n u s i acco r w i t inst r m c a h a in t 1 md i co[ll[...]
-
Page 4
H T U T M A T h ma n i org a i n n ch a T l h t m t b u s o y o pr i y a u r t r t h c h 1 t 6 Cha p 7 th r 9 m b t r a a re f g f p r opera t e t I as s a d e o k n o t o o comp u T ch a a a fo l Cha p 1 Intr o T h ch a ind i t pr i fe a o y p r t n a func t o t pr i com p a a a c e x o t m f st y t h y o pr i c pr o Cha p 2 — Se t U t P r T h c[...]
-
Page 5
Cha p 6 — Troubl e T h sec t s h a l i o c h p o t f o i y p i n wor k pro p I a l in c d e o s r o m a oper a y c pe r yo u I i n h o a c o s man u C a y o aut h se r c e i y a u n o y a t ca r o a main t o se r op e o t p r Cha p 7 — Opt i Acc e T h cha p exp l t op t acc e t a a v f y pri n a n h t in s a u t h Cha p 8 — Pr i Co n Co m T h[...]
-
Page 6
Cha p 1 T O C O INTR O Pr i com p Su m o pr i fe a F o s t ex a Cha p 2 SE T U T P R Pr i pla c Unp a a ins p Se t u Inst a t p l k Rem o t f r c o Inst a t r i ca r Inst a t f r c o Inst a t p a g u Inst a t m u c o Con n t in t c a Conf i y o so f f t p r Cha p 3 P A INST A A U Sel e o p a Adj u t pr i g Lo a fa n f o Lo a t p a P a pa r P a unp [...]
-
Page 7
Pow e fun c S h t e m o L o t e m o P r a r t e m o P i l o m o F o l o m o F o a P i l o m o D adju s m o Hexa d d u Sw i comb i fun c F o f e T o f o Fo r mic r Re v mic r Cha n t a u lo a po s Cle a t buf f r e S a m a def i Cond i ind i b me s a t o Su m o di s me s Su m o b e t o Cha p 5 DE F SETT I M H ’ t s t E m o Func t o t E se t Cha p [...]
-
Page 8
Ch a 8 PR I CO N C O F o co n co m Cha r s co m Cha r s i a p i co m Ver t po s co m Hori z po s co m Gra p co m Dow n cha r co m O t pr i co m Ch a 9 REF E Specif i Pi n o int e co n Par a int e Se r int e Cha r s e Sta n cha r s # Inter n ch a s I cha r s # Cha r s # I sp e ch a s Propo r sp a t a IN D COM M SU M 8 8 8 8 8 9 9 9 9 9 9 9 9 1 1 1 1[...]
-
Page 9
[...]
-
Page 10
c h 1 I N T h pr i h a f u com p o fe a m a i a e x p f o a per s com p I su p t Ep s p r c a char a s e en a i t p r j a b a n y c c gene r b o t e a gr a T h sel e o p a y c u i a v a a t t o d o y c a pro d T h pr i ac c a o t f o p ● Si n sh e ( c f o a st a ● Fa n f o (co n f o ● Mult i f o . Prep r f o ● La b T h Mult i pr i h 1 re s [...]
-
Page 11
PR I CO M E n $ I M u co v Adjus t Ie k R e l C a s L . . / - — - ‘ R c A “ ‘ / Po w ‘ib b / / _ P l k B l e Pr i h e / Con t p a In t co n 2[...]
-
Page 12
Comp o Pa p g u Rel e l e Fr o c o M u c o R e c o En t s l Co n p a Po w sw i Pl a k n Inte r con n Cart r s l Pr i h e Ri b car t Adju s l e Tra c Cl a l e B a l e Des c A l s i s h ( f t h t p d e w p a i i n Re l pr e o t p T l m b b a f cu t f ( k ) a f f fa n f o ( k ) Pr o t p r h a o i c n e o y p r Re d t p r n o Pr o t t r f u a s e i i a[...]
-
Page 13
SU M O P R F E Fea t D o ma t (24 - im p pri n Exte n sof t sup p A E m o Mult i su p Car r s i Multi - pri n Fu n Hig h D r D r a Le t pri n I i com p w t E a I s t a w o w a s o t s u t pri n A u Em u C h ( m i p t s e t p r em u au t s f r y o pr o T h pr i in c H S D a R m a R o Pro p S a S Prop o Co u C o Pr o Pre s Pr e Pro p a S f I ad d y c[...]
-
Page 14
Fea t I Fu n Cha r sp a P r i 111 1 7 a 2 C a w a pro p s p L C Co n p a B u c o f f o p i p m m e a p a p f u L m in d c u s t Font / L o Ig n f a p s e s f y co m a s t o t s e f a p w i t c o p a Q u m o Re d p r n b ap p 5 Ho w p r s i a r Gra p pri n St a g r p r w r e o u t 3 x 3 d p s q i Pa p pa r P a f a p a Y c p o c s p a w i u n t f f P[...]
-
Page 15
F O S T E X T h foll o ex a s h t m a f s t y p r c p F C 1 Z : FC - : FC - : FC - : F C 1 0 : F C 1 Z : F C 1 2 : D r R o S a e i f Co u Pre s Sc r Or a O t o r Le t G o B 1 i p C i n e O C O C C O 3 UP C T W i g t H–G o O r O S t Fi r S Sc r S R o S TW - 12 3 A a 12 3 t a 12 3 A a 12 3 A a 12 3 A a 1 2 A A 12 3 A a 12 3 A a 123 4 1 7 o 123 4 A [...]
-
Page 16
Res i L f o a R o char a S a c h Co u cha r P r c h S i + Pr i pi t a r P i p i ( C P E l p ( C Semi-c o P i ( C P Co n p p ( C Con d e l p i ( C P No r prop o Co n pr o D o D o 1 e w i T r w i D 1 e i z e Q i z e . Var i 1 i n a ch a s p : Ot h fea t : Emph a D o e– s 1 t i C Un d in i 4+ % 9 W r 1 i n i n , S U P E R S C R I PT and s u B s CR 1[...]
-
Page 17
8[...]
-
Page 18
c h S E U T P T h ch a des c t fo l pr o t s y n p I y h a opt i acce s r e t C h a s e u t p ● ✎ ● ● ● Pr i pla c Unp a t c a b Mou n t pl a k n Inst a t ri b ca r Con f y o so f f t p r PR I PL A Be f y s t se t u y o pr i m s t y h a s pl a o w h t l o i B “ su i p l w m . ● ● ● ● ● ● ● A f i l e su r w h i f a vib r A [...]
-
Page 19
UNP A A IN S N o ch e e a i t i t b ag a F i 2 t m s t y h ever y (t h sh o b s it e I a n o t h i t a mi s co n y su p P 2 — . - -, -, .. . , —. , - LL. — - - . -, - “ n . . . Fig u Z- l Ch e t m a s u y o h a a l S I! e 1 ) tw m z r i m J r m ca r r gui d 5 Mu t cov e a n 6 Us e man u 1[...]
-
Page 20
1 T h opt i acce s w h y m h o r w y p a ● F i ri b car t ( F ● F o cart r ( se r ● R car t (R C D C ● Serial - con v (S P “ Aut o s h f e ( S I O ● P u tr a u n (PT - F o de t o t op t acc e r e t C h 7[...]
-
Page 21
SE T U Pl a t h pri n i t de s loc a a r e a p a m f r t h pr i a s h i Fi g 2 - T p a m a i i n t pre v da m t t pr i w h i tr a Y o w i w a t k e a t pa c ma t a l w t p r c i c a y o h a t m o t pr i t a n lo c Fig u 2- 2 Rem o t h pac k mat e f r t pri n Ins t t p l k T h pl a k n i pa c i n a ac c b w o a c Al i t h k n o t pl a s h w h i l o [...]
-
Page 22
Re m t f r c O p t f r c o b li f u t b c o u t t g o e si d t h re m t c o b p u u ( F i 2 — Fig u 2 - Up e t h lr O co v a re m I D pu l u NO T Y c k e t f r c o in s o t p r a s i Fi g 2 - B u i t h c y m t c n t i y fi n w i t t e a s e d T e as s e d Fig u 2 - T h fr o co v c a s t o t pri n 1[...]
-
Page 23
Ins t t r i c a N o ins t t ri b w i t fo l pr o 1 T a t s l outoft h t u thet e t r cart r clo c a s h b t a r e n k Fig u 2- 6 Ta k o u t h sl a o t h ri b b tu r t te n k n o t r i ca r 2 Gu i t ri b be t the p a t s i p h s ma k ce r t h t sp i o t ca r h o f i t s o t h car t it s s I Fig u 2- 7 Instal l t h ri b cart r 1[...]
-
Page 24
3 M a s u t h t r i i po s b e t ph a t p r h e sh i a s h i F i 2 4 T a t s l o o t r i a g b t u t t k Fig u 2 - M a s u t h t h ri b i posi t cor r Ins t t f r c Af t y h a ins t t r i ca r r e t f c 1 In s t t a i n t s l o t p r c 2 S w d o t r e o t f r c o t c i Fig u 2 - Insta l t h fr o co v[...]
-
Page 25
I Ins t t p a g u Fo l t h pro c b e t in s t p a g u 1 In s t t s l o e i s i o t p a g i t t t o t h r e co v 2 Pl a t h pa p g u horiz o a s h i F i 2 Fig u 2- 1 ln_sta l t h pa p gu i horizo n Ins t t m c o Fo l t h pro c b e t in s t m c o 1 In s t h t a o t l e s i o t m u c o i t h o t f co v 2 In s t h ot h t i n t s l o t f r c o 3 Sw i d [...]
-
Page 26
Con n t i n c Con n t pr i t y o co m u s a s t C e p inte r ca b O a P S o PC / co m t m t y u t h 25 - D- t con n a t com p a t A m 3 p i con n a t pr i e n T con f o t p r c i g i i Ch a 9 s h y n a c f c o t a comp u I y n e t co n t a s e p o u t o p S e Conv e SP C Fo l t pro c b e t c o t i n c 1 T u o t p o s w b t p r a t c o 2 Co n t int [...]
-
Page 27
I Con f y s o f t p M o appli c sof t pr o l y s p t t o p y a r us i s t h t so f c t a f ad v o t p r f e M a o t h sof t pa c pr o a in s o s p t h pre s a l i o pri n T h pri n i s e t em u t E p p r c o a t f I y o w a t em u t I pr i co m y c s i w t Elec t D Sw i ( E m o Ch o o o t fol l ( o r o pr e a c t y sel e Emu l m o # Sta n (E p m I [...]
-
Page 28
c h P IN S A U T h ch a des c inst r f p r s a s e p t adju s t pr i g a a in s p a SE L O P Y o pri n ac c a o t fo l t y o p a ● Si n sh e ( c f o a st a U t fr i f e o t o p A u S F ● Fa n f o Fa n f o h a h o a l t s a p e b t sh e T h a a l c a s p f o c o f o j u p l “co m p a Pri n o o n e t per f o co n f f m re d pr i qu a mi s t f a[...]
-
Page 29
NO T 1 N e f e la b bac k L a c e a p o t b a g s t i t pr i T re m la b f r t p a p a f y f i p r f t e o t la b a a p o b e t p s 2 U la b o n u n n o op e co n T la b a esp e se n t te m a h u 3 D n l e la b l o i t p r b e j T c ar o t pl a a m j w y r e p r ‘i g 3 - s h t reco m p r a f e t o p 18 m Perfora t Fmrt’ c fo r S i s h o 1 7 5 c[...]
-
Page 30
AD J T P R G T h dis t be t t p r h a t p l c b a t accom m dif f p a thi c T ad j l i l a t h l e s i o t pri n Pu s t ad j l t o t r o t h pri n na r t g a pu l i t o t f o t p w t h g a Th e a r f i posi t a y c f t l c l i e posi t T se c po s f r t r ( m w “ i t o m com m u s f s i s h o p a T r dif f pos i u n y g t b p r r e NO T Pri n w i[...]
-
Page 31
I LO A F A F T h pri n ac c fa n f o u t 1 w i T h pri n c f e fa n f o e i f t r o f t b o t h pri n a s h i F i 3 Fig u 3- 3 Pa p p a f o fan f fo r T h sec t w i t a y th r t pr o f l o p a unpa r fa n f o f r t r o t p r I y o w a t f e p a f r t b o y m u t o p P Tra c U n (R e t Ch a 7 2[...]
-
Page 32
Lo a t p a 1 P l a s t o fa n p a b e a b t p r 2 T u t pri n p o O 3 P u t re l l e t o t f r o t p r ( ~ ) T h t ef f o rel e t p a f t p l r o a e t tr a f e 4 O p t m u c o o t f r c o a s i F 3 1 M u c R e l I Fig u 3 - Ope n t h m u co v a co r l e po s 5 O p t r e c o u s t t g r o e i s a i F 3 R c o I Fig u 3 - Ope n t h r e co v 6 P a t p[...]
-
Page 33
7 O p b o tr a co v a m o t p a b a l h w t p i o t h tr a u n T r c l Fig u 3- 6 Mo u t h fan f pa p o v t tr a un i 8 9 Ad j t sp a o t tr a u n b s l t a t b u t h cl a l e a t b a o e u t r e a l t i posi t W h t c l l e i u t u i r e a w i i do w t u n i lo c N o c l t tr a co v a g m a s t t p h a ali g w i t p i o t tr a u n I t a n a l p r [...]
-
Page 34
1 1 T u o t p o u s t s w l o a t f o t p T pr i w i b e ind i t t p a i n y f l A “ me s w i a l f l o t L d i t c o t M u c o Fig u 3 - Cl o t h r e co v a n t m u co v t h s t p a g u ho r 1 2 N p u t b a l e t o t f r o t p r T p w b f a adj u p a t p r h t a p o r f p , Fig u 3 - P u t h b a le v to w t f r o t pr i t l p a NO T D n re t t b[...]
-
Page 35
P a p a Af t loa d fa n p a w i in t t r u y d n h t un l i w h y w a t p r o a c s h T p r w “ i f y o i y o fo l t pro c b e 1 2 3 T be g p a pa r s t w i t p o O f a p l i pri n pos i a t re l l e t o t f o t p ( k ). Pr e t 1 O L I I b u o t c o p t s t p o li n T O L I ind i l i w t o T e o t pr i f o a t l per f l e n m t ab o h a a p a sh [...]
-
Page 36
P a un p W h y w a t r e u s f a p a t p r i a f 1 Re m a c f o f r t p r 2 M o t p a g u i t ho r p o 3 M o t re l l e t o t f r o t p r ( & ) 4 M o t b a l e fo r T p r w au t f t pa r fa n p a b a i p o f p r NO T T pr i b e inte r i y m t r l w t p a i lo a T e o fu n A t e o pri n u t h t o f u t c o t p f wit h adv a b l f o 1 O p t m u c[...]
-
Page 37
LO A S I S H T h sec t w i t a y th r t pr o f l o s s o pa p T h pa p p a f c f o i s h i F i 3 I I Fig u 3- 1 Pa p p a f o c u fo r I y o a r u s t op t Au t S h F e r t C 7 1 Ra i t p a g u i po s o t r c o t p r I Fig u 3- 1 Ra i t h pa p gu i f o si n sh e 2 Ad j t p a gu i t m a t s o t p y w b u Rem e t h pri n w i s t s d i f t l e e o t h [...]
-
Page 38
3 T u o thepow e s w l o a t f o t p T pr i w i b e ind i t t h i n p i p o f p T “ P me s w i a l f l o t L d i t c t 4 M a s u t h t re l l e i a r p o ( ~ ) I fa n pa p al r m o i t p r p t I E J ] bu t t p a t p a i t of f s t t m t r l to w t r e o t pr i 5 P l a si n s h be t t g u p l t s o w y w a t p r to w t b o t p r G e p t p d i t gu[...]
-
Page 39
7 I y o w a t s t p a t a di f po s s t p r o b pre s t I O L I I bu t t s t p p o b u t h micr o fun c ( F de t r e t C h 4 3[...]
-
Page 40
c h 4 C O P O T h co n p a bu t c b p r in d t p t oper a ind i b t h n a O t f u c b a b hol d t h bu t d o w y t t p r p o o b pre s t co n p a bu t i co m T h ch a ex p a t b u a in d f u . . ● ● ✎ ✎ ● ✎ ✎ ✎ ● ● P a pri n F e p a ( f a s l f o a r e P a fa n f o S t top- o po s Se l t p r p i Se l a f o P r t e pat t Pr e sof[...]
-
Page 41
I O L I T h I O L I I bu t s e t p r o n a o f T s cha n e a t i y p r t bu t W h t h pr i i on - i c re c a p r d f t c o a n w i b ind i b t O L I in d b e l W t p i off- l i s t pri n a s e t co m a s i i n t i ca n ac c d a T h pri n po w u i t on - s t w p i l o I p i n o loa d t pr i po w u of f w t 6 m e a t Po w indi c l i w i b l W h y l p[...]
-
Page 42
EJECT/PARK NOTE: This button has no effect if the bottom feed mode is selected. This button results in different functions depending on the position of the release lever. If the release lever is facing toward the rear of the printer for the cut forms ( ~ ), pressing this button ejects the paper. If the release lever is facing toward the front of th[...]
-
Page 43
FONT This button selects the font to be printed. Draft font is selected at power-up unless the default settings are changed. To change the font, set the printer off- line, then press the EE2ED button repeatedly until the proper font is high- lighted on the LCD display. The selections cycle in the following order: Font LCD Message Roman jROMAN I San[...]
-
Page 44
POWER-UP FUNCTIONS In addition to their normal functions, all of the control panel buttons perform “special” functions if you hold them down while switching the power button on. ~ , MICRO,,,, - ‘OwER ~ ‘0”’ ““” ‘J’’’’’’:E’EED70NLD n n n n,,= —- A m,. ,,.. SWITCH SET FWNT E,(T I I I I I Font Pitch Print area Long [...]
-
Page 45
Long test mode If the printer is turned on while the I PAPER FEED ] button is pressed, the printer will enter the long self-test mode, with the “P2” message on the LCD display. The printer will print the version number of the printer’s ROM, the current Electronic DIP Switch (EDS) settings and the current Dot Adjust- ment setting, followed by [...]
-
Page 46
Print area test mode By holding the [ EJECT/PARK ] buttondown during power-up, theprinterwill enter the print area test mode. You can find how many lines on your paper are available for printing with l/6-inch line feeding. The printer will show the “P3” message on the LCD display and print the first line message on the paper, then print the las[...]
-
Page 47
Dot adjustment mode This mode is used to adjust the vertical alignment of text and graphics on successive bi-directional passes. After a period of time, your printer may work itself out of alignment on left and right printing passes, appearing most visibly during graphics printing. This mode will probably be used very rarely. 1. 2. 3. Turn the prin[...]
-
Page 48
5 . . . To change the mode for which the bi-directional adjustment is per- formed, press the [ ON LINE I button. This will cycle between “LQ”, “DRAFT”, “DRAFT COND” and “BIT IMAGE”. Repeat the process for all print modes. * * * Del’ ADJIJSTMENT ‘jETTING XX * LQ o: I 1 I I I I I ! I I I I , I I ~ III i I I I I ! III i ! I ~ I I I[...]
-
Page 49
Hexadecimal dump This feature is useful for programmers who are debugging printing programs and want to see the actual codes the printer is receiving. (Some computers change the codes the programmer intended.) In this mode, all data received will be printed in a hexadecimal dump format, rather than the control codes being acted on as command codes.[...]
-
Page 50
SWITCH COMBINATION FUNCTIONS Several additional functions can be achieved by pressing the control panel buttons in combinations. Top of form Form feed Buffer clear/All reset Figure 4-5. Switch combination functions of control panel Form feed If you are using cut forms, this operation ejects the current page. If you are using fanfold forms, it feeds[...]
-
Page 51
I Forward micro-feed For fine alignment, you can feed the paper forward in very small increments as follows: 1. Press the I ON LINE ] button to set the printer off-line. 2. press the I ON LINE I button again and hold it down. 3. While holding the I ON LINE ] button down, press the I PAPER FEEtI ] button. The paper will start advancing in a series o[...]
-
Page 52
Clearing the buffer/All reset The printer stores received data in a large memory buffer. This creates a problem when you want to abandon a printing job and restart: the printer may beholding more data in its buffer than it has actually printed, and this unprinted data must be cleared out before restarting. Turning power off is one way to clear the [...]
-
Page 53
I NOTE: You can store the following settings with this procedure. ● Current Font ● Current Pitch ● Current auto-loading amount for cut forms s Current auto-loading amount for fanfold forms ● Current auto-loading amount in ASF mode Data to be stored are controlled in Standard mode and IBM mode separately. For example, the data stored in the [...]
-
Page 54
CONDITIONS INDICATED BY MESSAGES AND TONES This section helps you identify the messages and the meanings of the tones. Summary of display messages Following table shows the summary of the messages on the LCD display. LCD Message ISANSERIF { ~PREsTiGE { ;seRlpT I ~Hs-DRAFT{ ;DRAFT 1 ]OPTION I PITCH EDS Iamii3 Meanings and action ROMAN LQ font is sel[...]
-
Page 55
LCD Message ON OFF Meaninm and action Displays in the EDS mode. Indicates the current status of the displayed EDS bank and switch number. Press the I EJECT/PARK ] button to change the status. Quiet mode is selected. Press the 1 PAPER FEED I button while in the on line mode to return to the Normal mode. Front panel setting are saved in the printer?[...]
-
Page 56
Summary of beep tones Following table shows the summary of beep tones. Beep tones Two seconds tone Long tone, once Four short tone sequence, two times Short tone, once Short tone, twice Short tone, triple One-quarter tone One-quarter tone, twice Intermittent tone One-quarter tone, twice Meanings Printer detects an error condition. Turn off the powe[...]
-
Page 57
48[...]
-
Page 58
chapter 5 DEFAULT SETTINGS=EDS MODE From the control panel you can change the parameters that define how your printer works. These parameters become your power-on settings.This func- tion is called the Electronic DIP Switch (EDS) mode. HOW TO SET THE EDS MODE The EDS mode in this printer has 16 functions that you can set as the power- on default. T[...]
-
Page 59
OF THE EDS SETTINGS The printer stores the parameters that you can select from the control panel while in the EDS mode. A default is the setting that the printer will use if none is specifically selected by a program. When you first turn on or later reset your printer these default settings will take effect. By changing the settings, you can alter [...]
-
Page 60
Switch A-1: Emulation Select the mode compatible with your computer and software. In the Standard/Epson mode, theprinteroperates like the Epson LQ-860/850. In the IBM mode, it operates like the IBM Proprinter X24E/24P, Ps/1 . The ON position selects Standard/Epson mode. The OFF position selects IBM mode. Switch A-2: Auto Emulation Change (AEC) Mode[...]
-
Page 61
Switch B-2: Paper-out When this switch is OFF the printer ignores the paper-out detector and prints down to (and beyond) the bottom edge. Switch B-4: This switch is used for technical purpose only. Leave this switch ON. Switch B-5: Printable area This printer can use two types of printing area format for single sheets (cut forms). By putting the sw[...]
-
Page 62
I Switches C-3 to C-5: Page Length Leave these switches ON if you will be using 1 l-inch forms. You will need to change the switches if you will be using a different page length as shown below: Page Length c-3 c-4 c-5 11 inches/Letter ON ON ON 8 inches OFF ON ON 11.7 inches/A4 ON OFF ON 12 inches OFF OFF ON 8.5 inches/Letter ON ON OFF 14 inches/Leg[...]
-
Page 63
International character sets differ in their assignment of 12 character codes in the Standard Italic character set. See the character tables in Chapter 11. With these switches you can select one of eight character sets as follows: Country D-2 D-3 D-4 Country D-2 D-3 D-4 U.S.A. ON ON ON Denmark I ON ON OFF France OFF ON ON Sweden OFF ON OFF Germany [...]
-
Page 64
Optional fonts (marked with*) can be selected only when the corre- sponding font cartridge is installed in the printer. If the corresponding font cartridge is not installed, the Roman is selected. Switch F-1: EDS Setting If you set this switch OFF, the current EDS settings are all cleared, and restores the Factory Settings, 55[...]
-
Page 65
56[...]
-
Page 66
chapter 6 TROUBLESHOOTING This chapter helps you identify printer conditions and problems that you can often correct yourself. Remember that your printer is a highly sophisticated electronic device, which also contains high voltage inside. For that reason, only carry out those operations described in this chapter. CAUTION: Any attempt to carry out [...]
-
Page 67
● Printer test works, but printer does not print when attached to computer Probable Cause ] Action Printer cable has a problem. Problem with the application program. Incorrect emulation is selected. Make sure that the printer cable is correctly connected at both ends, printer and computer. Refer to your application program manual. Select the othe[...]
-
Page 68
● Printer does not feed paper Probable Cause Paper is jamming. Bail lever is closed before paper goes through the bail le- ver location. Adjustment lever is set incorrectly. Fanfold form is parked. Action Remove all forms and pieces of paper. Open the bail lever. Bail lever automatically closed when the paper goes through the bail lever location.[...]
-
Page 69
● Incorrect number of lines on a page Probable Cause Paper is adjusted incorrectly. Paper has shifted backwards after several forms printed correctly. Incorrect emula- tion is selected. Problem with the application program. Distance printer must pull paper is too far. Paper is getting stuck on cables. Action Set the top of form. See “Top of for[...]
-
Page 70
● Characters are wrong or missing; formatting control codes do not work Probable Cause Action Problem with the Refer to your application program manual. application program. Some wires are Printer needs repair. missing from the print head. Wrong default Check the current EDS setting. Modify the EDS setting. setting with EDS switches. ● Dots are[...]
-
Page 71
● Printer is unstable; Wrong characters are printed; Left margin changes; printing stops Probable Cause ] Action I Static electricity is resulting from low humidity or interference from nearby electrical devices. Increase the humidity. Move devices with electric motors away from the printer. ● Left margin moves to the right during printing Prob[...]
-
Page 72
● Printer case is hot to the touch Probable Cause Action printer’s vents Move object away from the air vents, including the are blocked. bottom of the printer. ● Printer is noisy Probable Cause I Action ---J The printer vibrates. Printer covers are open. Move any objects that touch the printer. Ensure that the printer is on a level, study sur[...]
-
Page 73
MAINTENANCE Essentially, your printer is a robust piece of equipment, but should be treated with a modicum of care in order to avoid malfunctions. For example: ● Keep your printer in a “comfortable” environment. Roughly speaking, if you are comfortable, then the environment is suitable for your printer (see Chap[er 2). ● Do not subject the [...]
-
Page 74
chapter 7 OPTIONAL ACCESSORIES You can select the following accessories as option. ● Automatic sheet feeder (SF-1ODS) ● Pull tractor unit (PT-1OZS) ● Font cartridges (FC series) ● RAM cartridge (RC-32Z, DC-32Z) ● Serial-Parallel Converter (SPC-8K) This chapter describes how to install and use these optional accessories. NOTE: When you ins[...]
-
Page 75
Setting up The procedure to install the ASF is: 1. Use the printer’s EDS mode to select ASF as “installed”. (For details, please refer to Chapter 5.) 2. Open the front cover by lifting up the back using the two grips on either side, then remove the cover by pulling up. 3. Open the rear cover by lifting up the front using the two grips on eith[...]
-
Page 76
6. Lower the rear side of the Automatic Sheet Feeder and attach it to the holder shaft. 7. Install the printer cover provided with the Automatic Sheet Feeder. I Figure 7-4. Install the printer cover. 8. Insert the hopper attachment on top of the hopper support section as shown in Figure 7-5. I Figure 7-5. Insert the hopper attachment. 9. Insert the[...]
-
Page 77
NOTE: Set the front cover aside carefully after they have been removed from the printer. Reverse the procedure described above when removing the Automatic Sheet Feeder. Figure 7-6. Insert the stacker attachment Loading paper 1, 2. 3. If fanfold paper has already been loaded in the printer, park the paper through the rear slot. Push the printer rele[...]
-
Page 78
4. Adjust the left paper guide to the desired left position by moving it horizontally in either direction. Figure 7-8. Adjust the paper guides to accommodate the width of the paper. 5. Adjust the right paper guide to accommodate the width of the paper. The guides should be adjusted to restrict the amount of horizontal play while allowing the paper [...]
-
Page 79
8. Push the paper loading lever toward the rear of the printer. Figure 7-10. Push the paper Ioadmg lever to hold the paper stack. Now. you are ready to start printing with the Automatic Sheet Feeder. Feeding a single sheet A single sheet of paper can also be fed manually with the Automatic Sheet Feeder. 1. Set the paper by inserting into the slot a[...]
-
Page 80
PULL TRACTOR UNIT (PT-IOZS) You can use the Pull Tractor Unit to print on fanfold forms or multi-part forms through the bottom feed slot. Setting up The procedure to mount the Pull Tractor Unit is: 1. 2. 3. 4. Open the front cover by lifting up the back using the two grips on either side, then remove it. Open the rear cover by lifting up the front [...]
-
Page 81
I Lock lever Figure 7-13. Install the Pull Tractor Unit onto the printer by pushing the lock levers. 6. Install the paper guide provided with the Pull Tractor Unit, as shown in Figure 7-14. 7. Install the printer cover provided with the Pull Tractor Unit. Figure 7-14. Mount the papec guide and the printer cover onto the printer. NOTE: Set the paper[...]
-
Page 82
Loading paper 1. Open the printer cover. 2. With the tractor covers open, guide the paper from the bottom of the printer, by aligning holes with the pins on the tractor unit. Figure 7-15. Mount the fanfold paper from the bottom of the printer. 3. Adjust the spacing of thetractorunitsby sliding them along the bar, using the clamp lever at the back o[...]
-
Page 83
I p lever T~actor cover I I I Figure 7-16. Close the tractor covers after adjust the spacing of the tractor units by sliding them along the bar. 5. After setting upthe paper from the bottom of the printer, install the printer cover. :1 Figure 7-17. Mount the printer cover. Now, you are ready to start printing with the Pull Tracter Unit. 74[...]
-
Page 84
FONT CARTRIDGES AND RAM CARTRIDGES This printer has five built-in LQ fonts, and a 16 K-byte printing buffer. You can add the following optional fonts or expand the printing buffer by installing optional cartridges (Font Cartridge or RAM Cartridge). [Optional Font Cartidges] I Font Name I Character sample ● FC- IZ Orator 123456789 ABCDE ABCDE Orat[...]
-
Page 85
To install or change a cartridge, follow the procedure below. 1. Turn off the power switch at the front of the printer, and open the front cover. 2. Remove the connector cover at the right side of the printer. 1 Figure 7-18. Remove the connector cover at the right side of the printer 3. Push out the cap from the connector cover, as shown in Figure [...]
-
Page 86
5. Insert the cartridge into the slot of the connector cover, and slide it all the way in. Figure 7-20. Insert the carirldge into the slot of the connector cover. 6. Close the front cover. NOTE: Remount the cap on the connector cover optional cartridge. if you are not using an 77[...]
-
Page 87
INTERFACE CONVERTER (SPC-8K) To run the printer in serial mode, you should use the optional Serial/Parallel Converter (SPC-8K). The procedure to install the Converter is: 1. 2. 3. 4. 5. - Set the DIP switches on the SPC-8K before attaching it to the printer. (See next page for detailed information.) Turn off the power switch and disconnect the powe[...]
-
Page 88
DIP Switch Functions on The Converter It is necessary to make compatible the data transfer conditions between the computer and the serial interface board with the DIP switch settings on the converter. Following table shows the functions of the DIP switches on the Serial- Parallel Converter. 3 Data Protocol (Refer below) 4 5 Parity condition (Refer [...]
-
Page 89
80[...]
-
Page 90
chapter 8 PRINTER CONTROL COMMANDS The printer has two emulation modes: Standard/Epson mode and IBM mode. In Standard/Epson mode, the printer emulates the functions of the Epson LQ- 860/850. In IBM mode, the printer emulates the IBM Proprinter X24E/24P and P!Y1 printer. Additional command codes are included as a superset of these emulations. The em[...]
-
Page 91
FONT CONTROL COMMANDS ,, ””= ...4.?, , . . . . . . . -,.----.,,,-, ---W,,V.,W,, ;td. <ESC> “X” ]1 27 120 n IB 78 n Changes the print quality according to the value of n, as shown below: 0 Draft 1 Letter Quality BM <WC> “[” <d> 27 91 100 IB 5B 64 Changes the print quality according to the wdue of <1> <O> n i[...]
-
Page 92
Mod( std. Std. Both Both Both I --1- <ESC> “q” II 27 113 r -=-L ==7= Hexadecimal lB 28 20 03 00 01 nl n2 lB 53 0( lB 53 01 lB 54 Description Start score according to the values ofnl and n2, as shown below. nl: 1 Underlining 2 Strike-through 3 Overlining n2: O Cancel score I Single continuous line 2 Double continuous line 5 Single broken l[...]
-
Page 93
CHARACTER SET COMMANDS .- .-1 AC. r.,, I n,-, -;-., I Uownrie,-i.nol I mmef-rimtinn Iluue H-3LII u~bl,,,a, I !Cma”cu!!!!u! , LJG-vllvtl”!l 3oth <Esc> “t” <0> 27 116 0] IB 74 00] Selects the standard charx~er set. 3oth <ESC> “t’> <1> 27 1. ., .- -., . . . . . loth <ESC> “7” 27 5.5 knh ;[d. <E;c>[...]
-
Page 94
CHARACTER SIZE AND PITCH COMMANDS ,,VUG -U”!! ---. ..,.-. -,. ----. ...-, -W--..y. ,-., ;tcf. <ESC> “P” 27 80 lB 50 Chmgcs from either elite or senli-condensed to pica pitch (10 cpi) or from condensed elite [o condensed pico ( 17 cpi). B&l <Del> 18 12 Changes from either elite orconcfenswl 10 pica ( 10 cpi). ital. <ESC> [...]
-
Page 95
L ~ode ASCII Decimal Hexadecimal Description BM <ESC> “[”’ “1” 27 91 73 iB 5B 49 Changes the print font and pitch according to the <~> <()> 20 02 00 values of nl and n2, as shown helm+. 1?/ n2 nl n2 nl r12 nl n2 Font and pitch 0 11 10 CPI Courier 1 235 [ ~ Cp[ co~ri~r I 136 I 5 CPI Courier 1 237 17 CPI Courier I 238 20 C[...]
-
Page 96
BM <ESC> “[” “@” <4> <o> <o> <O> n m 27 91 64 400 Onm lB 5B 04 00 00 n 40 Selects a combination of character height, width, 00 and line spacing according to the value of n and m, m as below. n Line spacing Character height O Unchanged Unchanged 1 2 16 17 18 j~ 33 34 Unchanged Unchanged Single Single Single Doub[...]
-
Page 97
VERTICAL POSITION COMMANDS Mode Both Both std. ski IBM Both Both IBM Both Std. IBM Both Std. St[i. IBM Both Bt)th Both B[)th Both std. Both Both Both Std. ASCII Decimal Hexadecimal Description <ESC> l)” 27 48 IB 30 Set Iinc spacing 10 1/8 inctl. <ESC> “1“ 27 49 IB 31 Set line spxing [o 7/60 m 7/72 inch. <Rx> “2’” 27 50[...]
-
Page 98
Mode ASCII Decimal Hexadecimal Description std. <ESC-> “h” !10 27 98 no lB 62 II(I Cancels all current wmical tab stops in channel HO. 11/ 112 <()> !1 1 112 0 nl }12 00 (where no is betmeen (1 tind 7) and set% ne- iertical t~b stops in (his channel. Std. <ESC> “1” no 27 47 ?10 lB 2F no Selects a set of wrtical tab stops de[...]
-
Page 99
HORIZONTAL POSITION COMMANDS ulod~ ASCII Decimal Hexadecimal Description $td. <ESC> “1” )1 27 108 n IB 6C ,Z Sets the left margin tit column n in the current character pitch. $td. <ESC> “Q” n 27 61 n IB 51 }1 Sets the right margin at column II h the cu~ent character pitch. BM <ESC> “X” 27 66 IB 58 Sets the left mfirgin[...]
-
Page 100
GRAPHICS COMMANDS Aod k)[h loth kxh knl] !ld. !td. 13M ld. M3cll <ESC> “K” )![ 11? ml 11!2 <ESC> “L” Ill 112 1111 ttl? <ESC> “Y” 11/ /12 ml H12 <ESC> “Z” }1/ ?1? !11/ m? <FS> ,,z., ““ Ill /12 ml !112 Ill.< :Esc> “*” /10 11/ II? 1?1/ m? :Esc> q“ -g HI H? ml) /11/ 1112 :Esc> ..?.. 1?[...]
-
Page 101
DOWNLOAD CHARACTER COMMANDS Aod ;td. BM ;td. ;td. ;td. scll :Esc> “&” <()> ?!/ t12 mo 1)1/ 1112 dl d2 dt :Esc> “=” !1 / 1!2 ..#.. 1!.3 !14 <()> 11.5 ml mz mY 1// d2 d.r :ESC> “:” <()> 11 <O> :ESC> “’1” <1> :ESC> “t” ~~> :ESC> “’l” <()> )ecimal 27 38 C ,1/ n2 m[...]
-
Page 102
OTHER PRINTER COMMANDS Mode ASCII Decimal Hexadecimal Description std. <ESC> “>” 27 62 IB 3E Sets [he mm( ,ignit’icmt bit ()(’ twh ~uhxcquent byte receibed to 1. std. <Esc> =.’ 27 61 IB 3D Sew the M(]s1 signilicml hii (If’ e~uh suhscqucn( hytc rccci~ed [() (). std. <ESC> “#” 27 35 IB 23 Cancels the preceding cmn[...]
-
Page 103
94[...]
-
Page 104
chapter 9 REFERENCE SPECIFICATIONS Printing system ..............................Serial Impact Dot-matrix Printing speed .... ... .. .. .. ... ..... .. .. ... .. .. Pica Elite Semi-condensed High-Speed Draft 210cps — — Draft 160 CPS 192cps 240cps Letter Quality 53 Cps 64 CPS 80 CPS Print direction ..... .. ... .. ... .. ..... ... .. ... . . Bi-[...]
-
Page 105
Characters ... .. ... .. ... .. .... .. ... .. ... .... . ASCII 96 International 16 sets (*) IBM special 111 IBM block graphic 50 IBM code page 6 sets (**) Download 255 * USA, France, Germany, England, Denmark I, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America, Korea, Irish, Legal ** #437 (USA), #85t) (Multi-Lingua]), #86[...]
-
Page 106
24-pin normal 60 24 X 480 24-pin double 120 24 X 960 24-pin CRT 111 90 24 X 720 24-pin Triple 180 24 X 1440 24-pin Hex * 360 24 X 2880 * It is impossible to print adjacent dots in the mode marked with an asterisk (*). Paper feed .... . ... .. .. ... ..... .. ... .. .. .... . Friction or push tractor feed (standard) Bottom feed with pull tractor (op[...]
-
Page 107
I Interface ... .. .. ... .. .. .... ... .. .. .. ..... . ... . Centronics parallel (standard) RS-232C serial (option) Ribbon type .... .. ... . .. ... .... .. .. ... .. ... On-carriage, dedicated Film ribbon (Black only) -FZ24 Fabric ribbon (Black only) -Z24HD Long life fabric ribbon (Black only)- LZ24HD Ribbon life Fihn ribbon (FZ24) ............[...]
-
Page 108
PINOUT OF INTERFACE CONNECTOR The following describes the pinout of the interface connector (signals which are low when active are overlined). Parallel interface Pin Name Function Goes from high to low (for> 0.5 ps) when 1 STROB”E- active 2 DATAO High when active 3 DATA1 High when active 4 DATA2 High when active 5 DATA3 High when active 6 DATA[...]
-
Page 109
I Serial Interface Pih Name Function 1 GND Printer’s chassis ground. 2 TXD This pin carries data from the printer. 3 RXD This pin carries data to the printer. 4 RTS This pin is always set space. This pin is Space when the computer is ready to 5 CTS send data. This printer does not check this pin. 6 N/C 7 GND Signal ground. 8-10 N/C This printer t[...]
-
Page 110
CHARACTER SETS The following tables show the standard and IBM character sets. The decimal character code of each character is shown in an inset to the lower right of the character. The hexadecimal code can be found by reading the entires at the top and left edges of the table. For example, the character “A” is in column 4 and row 1, so its hexa[...]
-
Page 111
I S c s I I o I 1 I 2 I 3 I (W) o @ P ‘ P o l b I l h F k l ( ! 1 A Q a q 1 17- I-T7 l-ii lx 1= k hi ~ ( “ 2 B R b r 2 IT l-m I’T4 l-m 1% k b b. (DC3) # 3 cs c s 3 b l-x l-% l-ii k K K r I ,, I — + I 4 ] 20 I 3b I h l % 5 E u e u 5 I-T k I-r7 b b IT liii- ~ (SYN) & 6 F v f v 6 b l--i l--ii F b 1= b- I-m (EEL} ! 7 G w ~ w 7 p’ l-m l-i [...]
-
Page 112
1[...]
-
Page 113
I n c s W a i n c s i s b a c f s t f c a m i t S I c s C 3368 999 9 9 9 1111 U # $ @ x z [ ] A ‘ { / } - F # $ A x z 0 c s A ‘ 6 t e “ G # $ S x z A o u A ‘ a o u f! ENGLAND k $ @ x z [ ] “ ‘ { ; } - D 1 # $ @ x z E 0 A A ‘ z g & ‘ S # D E x z A 6 A u 6 a o A u I # $ @ x z 0 6 A t A d k i S 1 ~ $ @ x z i N L A ‘ “ i }[...]
-
Page 114
I c s C P #437 (U. S.A.) o 1 2 3 4 5 6 7 (NIL) o @ P ‘ o P l F l F h l 1 ~ ( ! 1 1 A Q a ~ F r-ii I-T I-F l-x I-ii f7i- I-m 2 (OC2) “ 2 B R b r F l h E ll F F v (OC3) # 3 3 c s c s E F l h h 1 h ~ + (OC4) 4 $ 4 D T d t I-T hi l-i E l-ii F l-ii) F 5 + — s— %— 5— E— u— e~ u— n ml m [531 [691 1851 1101 I 1 w r3d r 541 r701 M I102 I [[...]
-
Page 115
1[...]
-
Page 116
C P #850 ( O c a i t C P # 1[...]
-
Page 117
C P #860 ( O c h a i t C P # 1[...]
-
Page 118
C P #861 ( O c a i t C P # 1[...]
-
Page 119
C P #863 ( F O c h a i t C P # I I 1 I I 1 1 , , * I I 8 I 9 I A I B I CIDIEIF I 1[...]
-
Page 120
C P #865 ( O c a i t C P # F 1 2 3 8191AIB c I DIEIF I d 6 7 8 9 A B c D E F L-E 1 1[...]
-
Page 121
C s O c h a i t c s # T d u o c c e s w a 7 i t o c f w t m s b i s t 1 b t < “ c i t s m o 1 0 (NW ro I 1 ( I m 2 ( n b 3 ( b p 4 ( b b 5 r m 6 ( p F 7 ( l m 8 ( ( h b (HT) 9 (EM) F F (LF) A l-ii l--m B (VT) (ESC) T hi (FF) ( FS) c l--m l-z (CR) D l-x ~ ( so) E l-ii hi- ( S1) F b I-7. 8 9 ( 0 h ~ 1 ( F b 2 ( b m 3 ( h ~ 4 ( m b 5 F m 6 ( b F [...]
-
Page 122
I s c s A c c b p b s c 113[...]
-
Page 123
I P S T T t l t w o y p p c f S m a I m T v g a i 3 o a i F e a v o 3 i 3 3 o a i Y m n t e t w i a s t f y p r p s i c c t n o p c h t w f o a l T f w t s e c i A c ( f e c s a i w f S n m S s u m a I m C c ~ C P w S # # # # # # N S IBM o 0 0 0 0 0 0 30 20 30 111111 @ 30 20 30 222222 @ 30 20 30 333333 v 30 20 30 4 4 4 4 4 4 + 30 20 30 5 5 5 5 5 5 [...]
-
Page 124
C c C P w , ### # # # N S I I 222222 V 3 2 3 I 2 2 2 2 2 2 s 3 2 3 222222 . 3 2 3 222222 2 3 2 3 222222 t 323 2 2 2 2 2 2 1 3 2 3 2 2 2 2 2 2 “ 323 222222 “ 3 2 3 222222 L 3 2 3 222222 “ 3 2 3 333333 A 3 2 3 3 3 3 3 3 3 v 3 2 3 3333333 3 2 3 3 3 3 3 3 3 3 ! 113 3333333 “ 3 2 3 3333333 # 3 2 3 3 3 3 3 3 3 3 $ 3 2 3 333333 3 % 3 2 3 3333333 &[...]
-
Page 125
C c C P w s # # # # # # N S I 555 5555 2 3 2 3 555 5 5 5 5 3 3 2 3 555 5555 4 3 2 3 555 5 5 5 5 5 3 2 3 555 55 55 6 3 2 3 555 5555 7 3 2 3 555 5 5 5 5 8 3 2 3 555 5555 9 3 2 3 555 5 5 5 5 : 1 1 3 555 5 5 5 5 ; 113 666 6 6 6 6 < 3 2 3 666 6666 = 3 2 3 666 6 6 6 6 > 3 2 3 666 6 6 6 6 ? 3 2 3 666 6666 @ 3 2 3 666 6666 A 324 666 6666 B 324 666 66[...]
-
Page 126
C c e Chr. P w # # N S I 8 8 P 3 2 3 S # # # # 8 8 8 8 8 h 8 8 = 81 81 81 81 82 82 82 82 83 83 83 83 84 84 84 84 85 85 85 85 8 8 Q 3 2 4 8 8 R 3 2 4 8 8 s 3 2 3 E 8 8 8 8 T 3 2 4 8 8 u 4 2 4 E 8 8 8 w 8 8 v 3 2 4 8 N 4 2 4 8 x 3 2 4 8 Y 3 2 4 9 z 3 2 3 9 [ 2 1 3 9 3 2 3 9 ] 2 1 3 8 8 E 8 9 9 9 9 m- 89 89 89 89 90 90 90 90 91 91 91 91 92 92 92 92 [...]
-
Page 127
C c C P w - ## # # # # N S I 111 1 1 1 1 n 3 2 3 111 1 1 1 1 0 3 2 3 1 1 1 1 1 1 1 p 3 2 3 11111 1 1 q 3 24 36 11 11 1 1 1 r 3 20 3 11111 1 1 s 3 2 3 111 11 1 1 t 2 1 24 111 11 1 1 u 3 2 3 111 1 1 1 1 v 3 2 3 111 1 1 1 1 w 4 2 4 111 1 1 1 1 x 3 2 3 1111 1 1 1 y 3 24 36 122 122 122 122 122 122 122 z 3 2 3 1111 1 1 1 { 2 1 3 111 11 1 1 / 1 1 3 111 11[...]
-
Page 128
C c a C P w S # # # # # # N S I 1 1 1 - - 1 1 i 111 1 1 1 1 - “ 1 i 1 1 1 1 1 1 - 1 - 1 A 3 2 4 1 1 1 - 1 - 1 A 3 2 4 111111 1 E 3 2 3 111 - 1 - 1 a 4 2 4 1 1 1 - 1 - 1 E 4 2 4 111111 1 6 3 2 3 1 1 1 - 1 - 1 0 3 2 3 1 1 1 1 - - 1 0 3 2 3 111 - 1 1 1 a 3 2 3 1 1 1 1 - 1 1 u 3 2 3 111 - - - 1 y 3 2 3 111 - 1 - 1 6 3 2 4 111111 1 u 4 2 4 1 1 1 1 - 1[...]
-
Page 129
C c C P w S ### # # # N S I 1 1 1 1 1 1 1 1 3 2 3 1 1 1 1 1 1 1 % 3 2 3 1 1 1 1 1 1 1 % 3 2 3 1111 1 “ 1 i 3 2 3 1 1 1 1 1 1 1 K 3 2 4 1 1 1 1 1 1 - ) 3 2 4 1 1 1 1 1 1 1 ~ 333 1 1 1 1 1 1 1 : 3 3 3 111111 1 ~ 333 1 1 1 1 1 1 1 333 1 1 1 1 1 1 1 333 1 1 - 1 1 1 1 4 333 1 1 - 1 1 1 1 333 1 1 - 1 1 1 1 n 333 1 1 - 1 1 1 1 7 333 11111 11 + 333 1 1 1[...]
-
Page 130
C c C P w - # ### # # N S I 2 2 22 2 2 2 1 3 3 3 2 2 2 2 2 2 2 F 33 3 2 2 22 2 2 2 4 3 3 3 22 22 2 2 2 T 3 3 3 2 2 22 2 2 2 ~ 33 3 2 2 2 2 2 2 2 = 3 3 3 2 2 222 2 2 + 33 3 2 2 - 22 2 2 & 3 3 3 2 2 - 22 2 2 ~ 3 3 3 2 2 - 22 2 2 y 3 3 3 2 2 - 2 2 2 2 l 33 3 2 2 - 2 2 2 2 u 3 3 3 2 2 - 22 2 2 L 33 3 2 2 - 2 2 2 2 F 3 3 3 2 2 - 2 2 2 2 I 3 3 3 2 2 [...]
-
Page 131
I C c - C P w S # # # # # # N S I 22222 2 2 v 333 2 2 - 2 2 2 2 T 3 3 3 2 2 - 2 2 2 2 @ 3 3 4 2 2 “ 2 2 2 2 e 3 3 4 2 2 - 2 2 2 2 Q 3 3 4 2 2 - 2 2 2 2 d 3 3 3 2 2 - 2 2 2 2 ~ 3 3 3 2 2 - 2 2 2 2 g 3 3 4 2 2 - 2 2 2 2 E 333 2 2 - 2 2 2 2 n 3 3 3 2 2 - 2 2 2 2 ~ 333 22222 22 k 3 3 3 2 2 - 2 2 2 2 2 3 3 3 2 2 - 2 2 2 2 i 3 3 3 2 2 - 2 2 2 2 r 3 3 3[...]
-
Page 132
C c C P W , # # # # # # N S I I - 111 - - A 324 1 1 - 1 - A 4 2 4 1 1 - 1 - A 4 2 4 I - 1 - - - - @ 3 2 3 1 1 - - - 5 3 2 3 1 1 - - - A 4 2 4 I - 2 - - 1 1 ~ 3 2 3 2 - 1 - - d 3 2 3 2 - 1 - - E 4 2 4 - 2 1 - 1 - A 3 2 3 - 2 - - 1 - B 3 2 3 - 2 1 - 1 - E 3 2 3 2 - - - - 1 1 1 1 2 1 1 - - f 2 1 2 2 - - 1 - 1 2 1 2 - 2 - - 1 - Y 2 1 2 - 2 - - 1 - : 1 [...]
-
Page 133
C c C P w s ##### # N S I 2 - - 1 - - 3 2 3 I - 2 - - 1 - ‘ 1 2 3 2 - - - ‘ - 3 2 3 2 - - - - 3 2 3 - 2 - - 1 - i 3 2 3 2 - - 1 - $ 3 2 3 2 - - 1 - S 3 2 3 2 - - 1 - 3 2 3 I - 2 - - 1 - ; 3 2 3 2 ---- i 3 2 3 2 - - 1 -‘ 3 2 3 1 - = 3 2 3 I - - - - - - , 3 2 3 I - - - - - - 0 2 1 2 I - - - - - - w 4 2 4 I - - - - - - f 3 2 3 I - - - - - - B 3 [...]
-
Page 134
INDEX A A h o t 9 A d l 3 2 A m 4 5 I A r 4 A p s 1 A c c 9 A e c m 4 5 A L F 5 9 A l p 4 A u S F I 1 5 6 B B a 9 B l 3 2 2 2 B u f l s 8 B t 4 B c 9 B i p 5 9 B i d o 9 B f 1 2 9 B m 8 B s 9 B a i f 3 - c, C c 9 C c e 5 C r 9 C c 1 C a s 3 C t 9 C h h 8 C h m 9 C h p c 8 C h s # 8 1 C s # 8 C s c 8 C s t 1 C s c 8 C s 5 8 C t 5 C w 8 8 C l 3 2 C t[...]
-
Page 135
D o 5 D o c h c 9 D o c h 9 D 1 . E m 5 1 4 5 E s 5 E J b 3 E l D S m 5 1 5 E p 8 E m p 8 E m 1 E s 3 E x p r 8 ~ F ~ F s e 4 F f 1 1 F f l 2 F f p p 2 F e 4 F 1 1 F b 3 F C a 1 1 9 F c c o 8 F l o 5 3 F s e 5 F s 6 8 F s c o 8 F f 4 8 F m i 4 F r f 9 F c 3 1 1 F j 9 G G r c o 9 G r d i 5 G r m 9 G p 5 ~ H H g 9 H d 4 H S D 1 9 H p c 9 H t 9 H t s [...]
-
Page 136
L t p 9 L t m 3 L 9 M M d e 4 M a 6 M p m 8 M s i b 9 M 9 M u f 1 5 1 M c 3 1 2 ‘ N o g 9 N o c 9 O l c 9 O L b 3 O l c 9 O l f 8 O r f 8 O a c 1 1 O c h 8 O p c 9 O v 8 8 P P l 5 8 P f 9 P F b 3 P f s 9 P f t 5 P g 3 1 P p 1 5 2 P p F f 2 S s 2 P s p 9 P a d 5 P p 8 P o i c 9 P b 3 P c 8 P l m 5 3 P k 3 1 P s t 5 P s 3 P a 2 5 p a t m 3 P d 9 P [...]
-
Page 137
R m i 4 R c a 3 5 R j 9 R m 9 s S 8 S e o p 1 S e 3 Se m 8 S e C o I I 7 S u I 2 I X S d c a 9 S t m 3 S s 1 2 9 S c h s 1 Sp e 9 S t c h s 8 1 St r 8 S u 8 S u X S c o f u 4 I- T T a 1 T e f u 5 2 T o f 4 X T r 3 Tr o 5 u U n 8 8 Un i p 5 9 U n a i n 1 “ V e p c 8 V e t 8 V e t c 8 V e t s 8 w W 9 z Z s X ● 1[...]
-
Page 138
COMMAND SUMMARY S M The following commands take effect with the Standard mode. C C < E < <HT> <LF> <VT> <FF> <CR> <s0> <s1> <DC 1> <DC2> <DC3> <DC4> <CAN> <ESC> <LF> <ESC> <FF> <ESC> <S()> <ESC> <S1> <ESC> <EM> &[...]
-
Page 139
C O C < “ < “ < “ < .,’),. ,7 ~, : “ .. A.. ,, < “B” HI //2 < .. C., <()> ,, ““”’ < ..c.. ,, < “D” 1!/ .,.. 1 < “ < “ < “ < “ < . J < K. ,;: ,1~ ml < “L” }TI n? ml < “ < “ n < “ < “ < “Q” II < “ t < “ ( <ESC> “S’; [...]
-
Page 140
T f o c t effect with the IBM mode. C C <BEL> <BS> <HT> <LF> <VT> <FF> <CR> <so> <s1> <DC 1> <DC2> <DC4> <CAN’> <ESC> <SO> <ESC> <S1> <ESC> <EM> <()> <ESC> <EM> <4> <ESC> <EM> “R” <ESC> &l[...]
-
Page 141
I C O C F P < I S ~ : 8 C a - o s X B i r % : ! 9 ~l,]i.~ir~~tio[ l~llp[it](ing 03 E x X < “ I } S l a r m 9 <ESC> “Y” /// }/2 /?// t)C P d n d X g 9 <ESC> “Z” /f/ //2 })// }}?2 P qL 1 N g < “ ‘ <<<< , , 9 S c h w a l s 8 <ESC> ‘[” I“ <?> <()> ,1/ ,,2 S t L p 8 < ‘ “ <[...]
-
Page 142
CONTROL PANEL OPERATIONS T c o p b u c b p r m d t p t o p i b t n L D I — s t , n o E J B — P t d W ( Q e w t Q t h s t b p t f f o e t m t p W p s s F B U — s e t f t b c s P b a a r n l p r T e g e et t f - P F B — I y P t D L B — s t p r . I t p t F b r e b w o f t p W f f a n T c t .n ! e t h ! m , w ( y h t b u t ” P t b P B — a[...]
-
Page 143
BAIL LEVER FUNCTIONS T b a l e , u t c o P a l f P a Isn o o o P , us e Ie v t p a W h y o p t b 1 6 w t f a p a m c m f p g o o f a t t l au t c l t t p . f t p f o T a y t C I o t b t l I p r W h y o p t b l e a g f p a f e b a s t w h y l e o a m p r CWJ r EDS MODE Fmm i p a y o c h thep a d e h o prm e T fu n lsc a E l D S ( m T E m o h 1 fu n [...]
-
Page 144
Consumer Response S M C L i y s a c o y p a t m P a y c t W H e S M C L 2 N S J 4 A P M A M S M A I 4 L A S 2 N Y N 1 A P M E M S M D G W e 5 P B 9 D F r 9 F o G A P M U M S M U K L S H P B P G R H W B H U A P M F M S M F S A 2 r M F 7 Mo n A P M A M S M A L R 2 S B 1 D V R C H K A P M[...]
-
Page 145
[...]
-
Page 146
PRINTED IN JAPAN[...]