Go to page of
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Star Micronics SP2000, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Star Micronics SP2000 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Star Micronics SP2000. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Star Micronics SP2000 should contain:
- informations concerning technical data of Star Micronics SP2000
- name of the manufacturer and a year of construction of the Star Micronics SP2000 item
- rules of operation, control and maintenance of the Star Micronics SP2000 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Star Micronics SP2000 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Star Micronics SP2000, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Star Micronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Star Micronics SP2000.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Star Micronics SP2000 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Dot Matrix Printer SP2000 Series Programmer’ s Manual[...]
-
Page 2
T ABLE OF CONTENTS 1. Control Codes (Star Mode) ......................................................................... 1 1-1. Control Codes List .............................................................................. 1 1-1-1. Character Selection .................................................................. 1 1-1-2. Print Position Con[...]
-
Page 3
1 1-1. Contr ol Codes List The following tables show the Star Mode commands that are supported by this printer . 1-1-1. Character Selection Control Hexadecimal Function Page Codes Codes <ESC> "R" n 1B 52 n Selects the international character set 7 <ESC> "/" "1" 1B 2F 31 Selects slash zero 7 <ESC> &quo[...]
-
Page 4
2 Control Hexadecimal Function Page Codes Codes <ESC> "W" "1" 1B 57 31 Selects double magnification in character 12 <ESC> "W" <1> 1B 57 01 width <ESC> "W" "0" 1B 57 30 Resets magnification in character width 12 <ESC> "W" <0> 1B 57 00 <ESC> "h&[...]
-
Page 5
3 1-1-2. Print Position Contr ol Control Hexadecimal Function Page Codes Codes <LF> 0A Line feed 17 <VT> 0B V er tical tab 17 <FF> 0C Form feed 17 <CR> 0D Carriage Return 18 <ESC> "a" n 1B 61 n Feeds paper n lines 18 <HT> 09 Horizontal tab 18 <ESC> "A" n 1B 41 n Defines n /72-inch line s[...]
-
Page 6
4 1-1-3. Dot Graphics Control Control Hexadecimal Function Page Codes Codes <ESC> "K" n <0> 1B 4B n 00 m1 m2 8 dot normal density graphics 25 m1 m2 ... . .. <ESC> "L" n 1 n 2 1B 4C n 1 n 2 m1 m2 8 dot high density graphics 26 m1 m2 ... ... 1-1-4. Download Graphics Printing Control Hexadecimal Function Page Code[...]
-
Page 7
5 1-1-6. A uto Cutter Control (SP2500 type pr inters only) Control Hexadecimal Function Page Codes Codes <ESC> "d" "0" 1B 64 30 Full-cut command to the auto cutter 33 <ESC> "d" <0> 1B 64 00 <ESC> "d" "1" 1B 64 31 Partial-cut command to the auto cutter 33 <ESC> "d&q[...]
-
Page 8
6 1-1-8. Other Commands Control Hexadecimal Function Page Codes Codes <CAN> 18 Cancels pr inter b uff er & Initialize printer 36 <DC3> 13 Deselects printer 36 <DC1> 1 1 Sets select mode (Default) 36 <RS> 1E Beeps the buzzer 36 <ESC> "# N , n 1 n 2 n 3 n 4" 1B 23 N 2C n 1 n 2 <LF> < N UL> n 3 n[...]
-
Page 9
7 1-2. Contr ol Code Details The following section explains the details of the printer control codes. 1-2-1. Character Selection FUNCTION Selects the international character set CODE <ESC> "R" n (1B)H (52)H n DEFINITION RANGE (00)H n (0E)H or n = (40)H OUTLINE Select the international character set corresponding to the value set for[...]
-
Page 10
8 FUNCTION Selects the character code table CODE <ESC> <GS> "t" n 1B 1D 74 n OUTLINE Selects the character code table This function selects a character code table (as shown below). The default settings follow the settings of the memory switches 3- 8 to 3-5.[...]
-
Page 11
9 V alue of n Character T able Hex. Dec. 00 0 Normal (Default) 01 1 Code Page 437 (USA, Std. Europe)/IBM Character Set #2 02 2 Katakana 03 3 IBM Character Set #1 04 4 Codepage 858 (Multilingual) 05 5 Codepage 852 (Latin-2) 06 6 Codepage 860 (Portuguese) 07 7 Codepage 861 (Icelandic) 08 8 Codepage 863 (Canadian French) 09 9 Codepage 865 (Nordic) 0A [...]
-
Page 12
10 FUNCTION Selects IBM character set #2 CODE <ESC> "6" (1B)H (36)H OUTLINE Selects IBM character set #2. Switches from IBM character set #1 to character set #2. Subsequent 80H to 9FH codes are handled as character data. This command is invalid when the character code table settings are other than #1. FUNCTION Selects IBM character [...]
-
Page 13
11 FUNCTION Selects 5 X 9 (2 pulses per dot) font CODE <ESC> "P" (1B)H (50)H OUTLINE Selects 5 X 9 (2 pulses = 1 dot) font. The number of digits per line is set by the DIP switches in the f ollowing w ay . DSW 1 - 5 Digits Per Line ON 35 OFF 33 (When right space of character is 0.) FUNCTION Selects 5 X 9 (3 pulses per dot) font CODE[...]
-
Page 14
12 FUNCTION Sets the printing magnified double in character width CODE <SO> (0E)H OUTLINE Data follo wing this code is printed in double-width char acters. Same as <ESC> "W" "1" or <ESC> "W" <1>. FUNCTION Resets the printing magnified in character width (Default) CODE <DC4> (14)H OUTLINE C[...]
-
Page 15
13 OUTLINE Sets the magnification rate in character height Prints the subsequent data with a character height magnified by a rate specified by the value of n . n = 0 and "0"' Reset magnification n = 1 and "1": Double magnification Note: • Y ou can print in quadr uple magnification by combining horizontal and vertical doub[...]
-
Page 16
14 FUNCTION Cancels upperlining (Default) CODE <ESC> "_" "0" or <ESC> "_" <0> (1B)H (5F)H (30)H or (1B)H (5F)H (00)H OUTLINE Cancels upperline mode. FUNCTION Selects red color printing (SP2360/2560) Selects highlight printing (SP2320/2520) CODE <ESC> "4" (1B)H (34)H OUTLINE (SP2360/256[...]
-
Page 17
15 FUNCTION Cancels inverted printing (Default) CODE <DC2> (12)H OUTLINE Cancels the inv er ted character mode. This code is valid only when input at the beginning of a line. FUNCTION Specifies rotated print mode for text with a rotation CODE <ESC> <RS> "i" n 1B 1E 96 n OUTLINE This rotates and prints subsequent data 90?[...]
-
Page 18
16 FUNCTION Selects uni-directional print mode CODE <ESC> "U" "1" or <ESC> "U" <1> (1B)H (55)H (31)H or (1B)H (55)H (01)H OUTLINE Prints only when the print head moves from left to right. FUNCTION Selects bi-directional print mode CODE <ESC> "U" "0" or <ESC> "U&quo[...]
-
Page 19
17 1-2-2. Ptint Position Contr ol FUNCTION Line feed CODE <LF> (0A)H OUTLINE Data in the line buff er is pr inted out and one line is fed. If data does not exist before this code is received, the printer only feeds one line. FUNCTION V ertical tab CODE <VT> (0B)H OUTLINE Feeds the paper to the next vertical tab set position. When a vert[...]
-
Page 20
18 FUNCTION Carriage return CODE <CR> (0D)H OUTLINE The <CR> code is valid when the memory switch 3-1 = 1 (set to 0 at exfactory). When the <CR> code is valid, setting the memory switch 3-0 will cause the <CR> to function as shown in the table below . Memory Switch Setting <CR> Code Function MSW 3-1 = 0 Ignored (at exf[...]
-
Page 21
19 FUNCTION Define n /72-inch line spacing CODE <ESC> "A" n (1B)H (41)H n DEFINITION RANGE 0 < = n < = 85 (Default n = 12) OUTLINE Line feed is defined at n /72-inch after this code is received. This code sets the feed at n /72-inch with the <ESC> "2" code. FUNCTION Set n /72-inch line spacing CODE <ESC> [...]
-
Page 22
20 FUNCTION Sets line spacing to 7/72 inch CODE <ESC> "1" (1B)H (31)H OUTLINE Line feed is set at 7/72-inch after this code is received. FUNCTION One time n /72-inch feed CODE <ESC> "J" n (1B)H (4A)H n DEFINITION RANGE 1 < = n < = 255 OUTLINE This code activates the n /72-inch paper feed once. FUNCTION Sets lin[...]
-
Page 23
21 FUNCTION Sets horizontal tab stops CODE <ESC> "D" n1 n2 ...nk <0> (1B)H (44)H n1 n2 ...nk (00)H DEFINITION RANGE 1 < = n1 < = n2 < = n3 ... < nk < = (Maximum print columns -1), 1 < = k < = 16 OUTLINE Cancels all horizontal tab stops and sets new tab stops within the character pitch at n1 , n2 , etc. Y o[...]
-
Page 24
22 FUNCTION Sets right margin CODE <ESC> "Q" n 1B 51 n OUTLINE Sets the non-printable range with the current character pitch up to the n th postion with the left edge as the reference, after printing the data in the line buff er. Settings changed par tway through a line tak e eff ect from the subsequent line. Changing the character [...]
-
Page 25
23 FUNCTION Aligns position CODE <ESC> <GS> "a" n (1B)H (1D)H (61)H n Sets the alignment of the positions. OUTLINE Aligns all print data of one line to the specified position. n = (00)H, "0": Left edge alignment (default) (01)H, "1": Center alignment (02)H, "2": Right edge alignment ABC ABCD ABCDE[...]
-
Page 26
24 FUNCTION Sets vertical tab stops CODE <ESC> "B" n1 n2 ...nk <0> (1B)H (42)H n1 n2 ...nk (00)H DEFINITION RANGE 1 < = n1 < = n2 < = n3 ... < nk < = 255 < = 1 < = k < = 16 OUTLINE Cancels all current vertical tab stops and sets new vertical tab stops at lines n1 , n2 , etc. where n1 , n2 , etc. are num[...]
-
Page 27
25 1-2-3. Dot Graphics Control FUNCTION 8 dot normal density graphics CODE <ESC> "K" n1 <0> m1 m2 ... (1B)H (4B)H n1 (00)H m1 m2 ... DEFINITION RANGE 1 < = n1 < = 200 (DIP SW 1 - 5 = ON) or 1 < = n1 < = 210 (DIP SW = OFF) OUTLINE Executes 8 dot bit image print determined by " n1 ." The total number of bit[...]
-
Page 28
26 First, since the volume of data is 30, n1 = (1E)H. If the data m1 to m30 is conv er ted to hexadecimal, it appears as sho wn below . Print Sample FUNCTION 8 dot high density graphics CODE <ESC> "L" n1 n2 m1 m2... (1B)H (4C)H n1 n2 m1 m2... DEFINITION RANGE 1 < = n1 + 256 X n2 < = 420 (DIP SW 1-5 = ON)) 1 < = n1 + 256 X n[...]
-
Page 29
27 NO TE For double density bit image printing, dots cannot be printed overlapping each other in the horizontal direction. The following is an example of this. m2 m4 m6 m1 m3 m5 m7 m8 m9 m10 m11 D8 D7 D6 D5 D4 D3 D2 D1 m2 m4 m6 m1 m3 m5 m7 m8 m9 m10 m11 D8 D7 D6 D5 D4 D3 D2 D1 Printing possible Printing not possib le Overlapping horizontally Overla[...]
-
Page 30
28 1-2-4. Download Graphics Printing FUNCTION Defines download characters CODE When the 7 X 9 (half dot) font is set (default setting): <ESC> "&" <0> n1 n2 [m0 m1 m2 m3 m4 m5 m6 m7] n2 - n1 + 1 (1B)H (26)H (00)H n1 n2 [m0 m1 m2 m3 m4 m5 m6 m7] n2 - n1 + 1 When the 5 X 9 font is set: <ESC> "&" <0> [...]
-
Page 31
29 m2 m4 m6 m1 m3 m5 m7 D8 D7 D6 D5 D4 D3 D2 D1 m2 m4 m6 m1 m3 m5 m7 D8 D7 D6 D5 D4 D3 D2 D1 Printing possible Printing not possible Overlapping horizontally Overlapping horizontally FUNCTION Enables download character set CODE <ESC> "%" "1" or <ESC> "%" <1> (1B)H (25)H (31)H or (1B)H (25)H (01)H OUTL[...]
-
Page 32
30 (2) Define the do wnload characters. When character codes where the download character is written are specified as (21)H, (22)H, (23)H, n1 = (21)H, n2 = (23)H are obtained. If the relationship between the character pattern data and printing head is specified to "not use pin 9", m0 = (80)H is obtained. When data m1 to m7 are converted i[...]
-
Page 33
31 1-2-5. Peripheral De vice Control FUNCTION Defines drive pulse width for peripheral device #1 CODE <ESC> <BEL> n1 n2 (1B)H (07)H n1 n2 DEFINITION RANGE 1 < = n1 < = 127, 1 < = n2 < = 127 (default setting n1 = n2 = 20) OUTLINE Adjusts drive pulse width for peripheral devices requiring other than standard 200 ms pulse time [...]
-
Page 34
32 FUNCTION Controls peripheral device #1 immediately CODE <FS> (1C)H OUTLINE Executes drive pulse for peripheral unit 1 (immediate). This code diff ers from the <BEL> code as follo ws: When the printer receives an <FS> code, the command is ex ecuted immediately . The <BEL> code is stored in the data buff er in the same mann[...]
-
Page 35
33 1-2-6. A uto Cutter Control (SP2500 type pr inters only) FUNCTION Full-cut command to the auto cutter CODE <ESC> "d" "0" or <ESC> "d" <0> (1B)H (64)H (30)H or (1B)H (64)H (00)H OUTLINE Full cut command. Executes a full cut after printing the data in the line b uffer . This command is valid only on [...]
-
Page 36
34 FUNCTION Partial-cut command to the auto cutter after paper feed CODE <ESC> “d” “3” or <ESC> “d” <3> (1B)H (64)H (33)H or (1B)H (64)H (03)H OUTLINE Paper feed + full cut command Executes the following actions after printing the data in the line buff er . (SP2520/2560) Feeds paper to the cutting position and executes[...]
-
Page 37
35 1-2-7. Command to Set the Page Format FUNCTION Set page length in n lines CODE <ESC> “C” n (1B)H (43)H n DEFINITION RANGE 1 < = n < = 255 (default: n =42) OUTLINE Sets page length in n lines. FUNCTION Set page length in n inches CODE <ESC> “C” <0> n (1B)H (43)H (00)H n DEFINITION RANGE 1 < = n < = 127 OUTLIN[...]
-
Page 38
36 1-2-8. Other Commands FUNCTION Cancels printer buff er & Initialize printer CODE <CAN> (18)H OUTLINE Clears the data buff er and line buff er and initializes all commands that have already been set. <CAN> is executed not when taking data from the reception buff er, b ut when it is received from the host. The select/deselect state[...]
-
Page 39
37 FUNCTION Sets the memory switch CODE <ESC> “# N, n1 n2 n3 n4 ” <LF> <NUL> HEX 1B 23 N 2C n1 n2 n3 n4 0A 00 OUTLINE In order to enable changed memory switch settings, turn the printer OFF and ON again or send the printer reset command (<ESC> “?” <LF> <NUL>) to the printer . Changed memory switch setting[...]
-
Page 40
38 2) N = 1 (Star mode only) n1 : Always “0” n2 : Always “0” Parameter Setting “0” (Default) “1” n3 Zero style Normal Slashed n4 International See below character set When memory switch N = 0, n3 = “0” (Destination is standard), this setting is valid. 3) N = 2 (Star mode) n1 : Always “0” n2 : Always “0” n3 : Always “0?[...]
-
Page 41
39 *1: Comdex Dual A uto Cut Mechanism (ST AR mode only) This mechanism automatically cuts when there is a consecu- tive paper feed exceedin 7/6 inch. Hosts that cannot send an escape sequence such as <ESC> “d” and 0, can cut the paper if a line feed code <LF> of 1/6 inch is sent 7 times consecutively . N = 2 (ESC/POS mode) n1 : Alw[...]
-
Page 42
40 V alue of n Character T able n1 n2 “0” or “8” “0 ” Normal (Default) “0” or “8” “1 ” Code Page 437 (USA, Std. Europe)/IBM Character Set #2 “0” or “8” “2 ” Katakana “0” or “8” “3 ” IBM Character Set #1 “0” or “8” “4 ” Codepage 858 (Multilingual) “0” or “8” “5 ” Codepage 852 (L[...]
-
Page 43
41 N = 3 (ESC/POS mode) n1 : Always “0” n2 : Always “0” n3 : Always “0” Parameter Setting “1” to “3” n4 CR code See below 5) N = 4 (Star mode) n3 : Always “0” Para. Setting “0” “1” “2” “3” n1 X on/X off Timing When Every 3 When Every 3 T oggled sec T oggled sec R TS Signal Condition Save as Save as Always Alw[...]
-
Page 44
42 N = 4 (ESC/POS mode) n3 : Always “0” Para. Setting “0” “1” “2” “3” n1 R TS signal condition Save as Save as Always Always DTR DTR SP ACE SP ACE n2 Receiv e buff er size 4 k bytes 4 k bytes 40 bytes 40 bytes n3 DSR signal check Checked Checked Not Not during setting status Checked Checked transmission 6) N = 5 n1 : Always “0[...]
-
Page 45
43 n2 T reatment of missing data during rev erse mode “0” to “7” Store “8” to “F” Delete *1: V alid only when using a parallel interface. Set DIP SW 1-2 if you are using a serial interface. Also, the conditions for BUSY and the automatic status are disregarded. *2: V alid only when using a parallel interface. For example, if you exi[...]
-
Page 46
44 FUNCTION T ransmits EO T status CODE <EOT> (04)H OUTLINE T ransmits the EO T status of the printer to the host in real-time. (Does not ex ecute after taking fro reception buff er , but immedi- ately upon receiving from the host.) It is in a “Data ready” state when using a bi-directional parallel interface. • When one <EO T> com[...]
-
Page 47
45 FUNCTION T ransmits ENQ status CODE <ENQ> (05)H OUTLINE T ransmits the ENQ status of the printer to the host in real-time. (Does not e x ecute after taking fro reception buff er , b ut immedi- ately upon receiving from the host.) It is in a “Data ready” state when using a bi-directional parallel interface. • When one <ENQ> comm[...]
-
Page 48
46 FUNCTION Confirms finish of printing CODE <ETB> (17)H OUTLINE This command cause the printer to wait until all printing is completed (the printing motor stops) and sets the printer status 1- 1 of the automatic status (<ETB> command) to “1” (only execute ETB). Also , if print data still remains in the line buff er, it e xecutes th[...]
-
Page 49
47 FUNCTION Enables/disables automatic status CODE <ESC> <RS> “a” n (1B)H (1E)H (61)H n OUTLINE This command sets the transmission conditions of the automatic status. Initial values are according to DIP switch 1-6. See Chapter 2 A utomatic Status Specifications for details on the contents of the automatic status. V alue of n Hex A u[...]
-
Page 50
48 2. ESC/POS Mode Commands The f ollowing tab le lists the TM-U200 and TM-U300 emulation commands that are suppor ted by this printer . 2-1. Contr ol Codes List Control Hexadecimal Function TM- TM- Codes Codes U200 U300 <HT> 09 Horizontal tab OK OK <LF> 0A Line feed OK OK <CR> 0D Prints and carriage return OK OK <DLE> <E[...]
-
Page 51
49 Control Hexadecimal Function TM- TM- Codes Codes U200 U300 <ESC> R 1B 52 Selects international character set OK OK <ESC> U 1B 55 Selects/cancels unidirectional OK OK printing mode <ESC> V 1B 56 Designates/cancels 90° character rotation <ESC> a 1B 61 Aligns position OK <ESC> c 3 1B 63 33 Selects the paper-end sensor[...]
-
Page 52
50 Ignored Commands Control Hexadecimal Function TM- TM- Codes Codes U200 U300 <ESC> < 1B 3c Ignored (Returns home) OK <ESC> c 0 n 1B 63 30 n Ignored (Selects paper type(s) for printing) OK <ESC> f t1 t2 1B 66 t1 t2 Ignored (Sets cut sheet wait time) OK <GS> E n 1D 45 n Ignored (Selects head control method) OK[...]
-
Page 53
51 3-1. Auto Status Auto status is a function that automatically relays any changes that occur in the status of the printer from the printer to the host. It is composed of the “Header -1,” “Header - 2” and “a plurality of bytes of printer states.” The host always identifies the data using the method of identification for each byte recei[...]
-
Page 54
52 T able 3-1 Header 1 (First Byte) Bit Content Status 0 Status 1 0 Always 1 1 2 Printer Status Byte Count 3 4 Always 0 5 Printer Status Byte Count 6 Reserved (Fixed at 0) 7 Not Used (Fixed at 0) T able 3-2 Relationship of Actual T ransmitted Byte Count and Header 1 T ransmitted Byte Count n (7 n 15) Header 1 7 00001111B (0F He x) 8 00100001B (21 H[...]
-
Page 55
53 T able 3-3 Header 2 (Second Byte) Bit Content Status 0 Status 1 0 Always 0 1 2 Automatic Status V er . Number 3 4 Always 0 5 A utomatic Status V er . Number 6 7 Not Used (Fixed at 0) T able 3-4 Relationship of Actual A utomatic Status V ersion and Header 2 V ersion Number n Header 2 1 00000010B (02 Hex) 2 00000100B (04 Hex) 3 00000110B (06 He x)[...]
-
Page 56
54 Printer Status Printer Status is the overall status transmitted in the third byte of the auto- matic status. Printer status is returned as transmission byte count -2 added by the Header 1. It always updates with new information. (There is no historical record existing.) T ables 3-5 to 3-9 show the composition of the ov erall status. The status o[...]
-
Page 57
55 T able 3-7 Printer Status 3 <Error Inf ormation> (Fifth Byte) Bit Content Status 0 Status 1 0 Always 0 1 Invalid 2 Invalid 3 Invalid 4 Always 0 5 Invalid 6 Reception Buff er Ov erflow Error (*) Does not occur Occurs 7 Not Used (Fixed at 0) * Bit 6 is cleared to 0 when returned to the host. T able 3-8 Printer Status 4 <Sensor Information[...]
-
Page 58
56 (2) Precautions Do not use the <ENQ>, <EOT>, <ESC>, <ACK> or <SOH> commands when the automatic status is v alid. Y ou must first inv alidate the use of the automatic status function using the DIP switches or the <ESC> <RS> “a” n command to use these inquiry commands. (3) Method to Identify States <[...]
-
Page 59
57 Star Mode (Character table: Normal) Note: The (7F)H code is a space when neither normal nor katakana. Appendix : Character Code T ables[...]
-
Page 60
58 Star Mode (Character table: Normal)[...]
-
Page 61
59 Star Mode (Character table: IBM Character set #2 (Code page 437 )) Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 62
60 Star Mode (Character table: Katakana) Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 63
61 Star Mode (Character table: IBM Character set #1 ) Note: Other characters are the same as those for IBM Character Set #2.[...]
-
Page 64
62 Star Mode Code Page #858 Code Page #852 Multi-lingual Latin-2 Code Page #860 Code Page #861 Portuguese Icelandic Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 65
63 Star Mode Code Page #863 Code Page #865 Canadian French Nordic Code Page #866 Cyrillic Russian Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 66
64 Star Mode Code Page #855 Code Page #857 Cyrillic Bulgarian T urkish Code Page #862 Code Page #864 Hebrew Arabic Note: Other characters are the same as those for Character table: Normal. 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 9 A B C D E F 0[...]
-
Page 67
65 Star Mode Code Page #737 Code Page #851 Greek Greek Code Page #869 Code Page #928 Greek Greek Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 68
66 Star Mode Code Page #772 Code Page #774 Lithuanian Lithuanian Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 69
67 Star Mode Code Page #874 Code Page #1250 Thai Windows Latin-2 Code Page #1251 Code Page #1252 Windows Cyrillic Windows Latin-1 Note: Other characters are the same as those for Character table: Normal. 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 8 [...]
-
Page 70
68 Star Mode Code Page #3840 Code Page #3841 IBM-Russian Gost Code Page #3843 Code Page #3844 Polish CS2 Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 71
69 Star Mode Code Page #3845 Code Page #3846 Hungarian T urkish Code Page #3847 Code Page #3848 Brazil-ABNT Brazil-ABICOMP Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 72
70 Star Mode Code Page #1001 Code Page #2001 Arabic Lithuanian-KBL Code Page #3001 Code Page #3002 Estonian-1 Estonian-2 Note: Other characters are the same as those for Character table: Normal.[...]
-
Page 73
71 Star Mode Code Page #301 1 Code Page #3012 Latvian-1 Latvian-2 Note: Other characters are the same as those for Character table: Normal. Code Page #3021 Code Page #3041 Bulgarian Maltese Note: Other characters are the same as those for Charac- ter table: Normal. Note: Other characters are the same as those for Code Page #437.[...]
-
Page 74
72 Star Mode International Character Set The character codes shown in the table are hexadecimal.[...]
-
Page 75
73 ESC/POS Mode Page 0 (PC437)[...]
-
Page 76
74 ESC/POS Mode Page 0 (PC437)[...]
-
Page 77
75 ESC/POS Mode Page 1 (Katakana) Note: Other characters are the same as those for Page 0.[...]
-
Page 78
76 ESC/POS Mode Page 2 (PC858: Multilingual) Note: Other characters are the same as those for Page 0.[...]
-
Page 79
77 ESC/POS Mode Page 3 (PC860: Portuguese) Page 4 (PC863: Canadian-French) Page 5 (PC865: Nordic) Note: Other characters are the same as those for Page 0.[...]
-
Page 80
78 ESC/POS Mode International Character Set The character codes shown in the table are hexadecimal.[...]
-
Page 81
HEAD OFFICE STAR MICRONICS CO., LTD. 536 Nanatsushinnya, Shimizu, Shmizuoka 42 4-0066 Japan T el: 0543-47-01 12, Fax: 0543-48-5013 Please access the following URL http://www .star-micronics.co.jp/service/ sp_sup _e.htm for the lastest revision of the manual. OVERSEAS SUBSIDIARY COMPANIES STAR MICRONICS AMERICA, INC. 1150 King Georges Post Road Edis[...]