Teledyne 100E manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Teledyne 100E, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Teledyne 100E one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Teledyne 100E. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Teledyne 100E should contain:
- informations concerning technical data of Teledyne 100E
- name of the manufacturer and a year of construction of the Teledyne 100E item
- rules of operation, control and maintenance of the Teledyne 100E item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Teledyne 100E alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Teledyne 100E, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Teledyne service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Teledyne 100E.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Teledyne 100E item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    ADDENDUM TO MODEL 100E OPERATORS MANUAL (P/N 04515) FOR MODEL 100EU TRACE LEVEL SULFUR DIOXIDE ANALYZER 9480 CARROLL PARK DRIVE SAN DIEGO, CA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: Api-sales@teledyne.com Website: http:// www .teledy ne-api.com/ 05831 Rev C DCN 5379 © 2007 T-API 08 A pril 2009 PRIN[...]

  • Page 2

    [...]

  • Page 3

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 TABLE OF CONTENTS 05944 Rev B 1 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED TABLE OF CONTENTS 1. PREFACE ........................................................................................................................ ....................................[...]

  • Page 4

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TABLE OF CONTENTS Addendum to M100E Manual - P/N 04515 2 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 LIST OF FIGURES Figure 3-1: M100EU Inter nal Layout ......................................................................................................... .......7 Figure 3-2: M100EU [...]

  • Page 5

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 PREFACE 05944 Rev B 3 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 1. PREFACE NOTE The information contained in this add endum is pertinent to M100EU analy zers running software revision F.0. Some or all of the information may not be applicable to later revisions[...]

  • Page 6

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL PREFACE Addendum to M100E Manual - P/N 04515 4 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 7

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 SPECIFICATIONS, APPROVALS AND W ARRANTY 05944 Rev B 5 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 2. SPECIFICATIONS, APPROVALS AND WARRANTY 2.1 SPECIFICATIONS Table 2-1: Model 100EU Basic Unit Specifications Min/Max Range (Physical Analog Output) In 1ppb increme[...]

  • Page 8

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL SPECIFICATIONS, APPROVA LS AND WARRANTY Addendum to M100E Manual - P/N 04515 6 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 2.2 EPA EQUIVALENCY DESIGNATION At this time the M100EU has not been certified by the EPA as an equivalent method at the time of this writing however it is anticipa[...]

  • Page 9

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 GETTING STARTED 05944 Rev B 7 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 3. GETTING STARTED 3.1 UNPACKING THE M100EU Unpack the M100EU as p er the directions in Section 3.1 of the M100E Manual - P/N 04515, with the following change. There are two redheaded ship[...]

  • Page 10

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL GETTING STARTE D Addendum to M100E Manual - P/N 04515 8 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 3.3 FUNCTIONAL CHECK OF THE M100EU To perform an initial functional check of the M100EU fo llow the steps contained in Section 3.2.4 of the M100E Manual - P/N 04145, but use the Test func[...]

  • Page 11

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 GETTING STARTED 05944 Rev B 9 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED Table 3-1: Test Functions Defined DISPLAY PARAMETER UNITS DESCRIPTION OFFSET SO 2 measurement Offset - The overall offset of the instrum ent as calcu lated durin g the last calibration act[...]

  • Page 12

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL GETTING STARTED Addendum to M100E Manual - P/N 04515 10 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 13

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 FREQENTLY ASKED QU ESTIONS & GLOSSA RY 05944 Rev B 11 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 4. FREQENTLY ASKED QU ESTIONS & GLOSSARY Please refer to Section 4 of the M100E manual, PN 0 4515 for information.[...]

  • Page 14

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL FREQUENT LY ASKED QUESTIONS & GLOSSA RY Addendum to M100E Manual - P/N 04515 12 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 15

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 OPTIONAL HARDWA RE AND SOFTWARE 05944 Rev B 13 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 5. OPTIONAL HARDWARE AND SOFTWARE Please refer to Section 5 of the M100E manual, PN 0 4515 for information.[...]

  • Page 16

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL OPTIONAL HARDWARE AN D SOFTWARE Addendum to M100E Manual - P/N 04515 14 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 17

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 M100EU OPERATING INSTRUCTIONS 05944 Rev B 15 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 6. M100EU OPERATING INSTRUCTIONS NOTE For the most part the operation instru ction for the M100EU are the same a s those described in Chapter 6 of the M100E Manual - P/N 045[...]

  • Page 18

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL M100EU OPERATING INSTRUCTIONS Addendum to M100E Manual - P/N 04515 SET UP X.X PRIMARY SETUP MENU CFG DAS RNGE PASS CLK MO RE EX IT SETUP X.X SEC ON D A R Y S ET U P ME NU COMM VAR S DIAG STBL SAMPL E RAN GE = 50 0.000 PPB S O2 =XX X .X < TST T ST > CAL SETUP EXIT returns to the PR IMARY SETUP [...]

  • Page 19

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 CALIBRATION PR OCE DURES 7. CALIBRATION PROCEDURES Calibration of the M100EU sho uld be performed according to the procedures described in Chapters 7 & 8 of the M100E Manual - P/N 04145. However, deliverin g span and ze ro gases for the lower ra nges that the[...]

  • Page 20

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL CALIB RATION PROCE DURES Addendum to M100E Manual - P/N 04515 18 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 21

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 EPA PROTOCOL CALIBRATION 8. EPA PROTOCOL CALIBRATION The M100EU is designated as an equiv alent method fo r measuring SO2 under certification EQSA-0495-100. Calibration of the M100EU is done so in a manner that is consistent with EPA requirements. For cali bratio[...]

  • Page 22

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL EPA PROTOC OL CALIBRATI ON Addendum to M100E Manual - P/N 04515 20 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 23

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 INSTRUMENT MAINTENANCE 9. INSTRUMENT MAINTENANCE Instrument maintenance is almost identical to that in the M100E. T he M100EU uses a 1 micron sample filter, instead of the 5 micron sample filter used in the M100E. Replacem ent part numbers are shown below. Part N[...]

  • Page 24

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL INSTRU MENT MA INTENANCE Addendum to M100E Manual - P/N 04515 22 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 25

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 THEORY OF OPERATION 10. THEORY OF OPERATION The M100EU is a modified M100E. The primary differ ences are the way in which the PMT and UV reference signals are acquired a nd processed. The M100EU has no shutter but rather e mploys synchronous demodulation to captu[...]

  • Page 26

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL THEORY OF OPERATION Addendum to M100E Manual - P/N 04515 PMT HOUSING Reaction Cell Sample Gas Outlet Sample Gas Inlet PMT PREAMP PC A Lamp Shutter Housing UV LA MP Reference Detector SA MP LE CHAMBER PMT Co oling System Figure 10-2: M100EU Sensor Module Ass embly These compo nents are divided into t[...]

  • Page 27

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 THEORY OF OPERATION UV Source Lamp Shutter Housin g UV Sou rce Le ns & Housing PMT Lens & Housin g Sample Chamber Heater Safety Shut-Off Sample C hamber Temp erature Sen sor & Heater 2 Reference Detector Light Trap Sample Air Outl et Sample Air Inlet [...]

  • Page 28

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL THEORY OF OPERATION Addendum to M100E Manual - P/N 04515 26 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 User Notes:[...]

  • Page 29

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11. TROUBLESHOOTING & REPAIR This section include s various troubleshooting and repair informatio n that is either in addition to that included in Chapter 11 of the M100E Manual (P/N 04145) CAUTION THE OPERATIONS OUTLINED IN THI [...]

  • Page 30

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 Table 11-1: Test Functions - Possible Caus es for Out-Of-Range Values TEST FUNCTION NOMINAL VALUE(S) POSSIBLE CAUSE(S) NORM PMT - - Noisy Norm PMT value (assuming unchanging SO 2 concentration of sample gas): Calibration error; HVPS p[...]

  • Page 31

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11.1.3 FAULT DIAGNOSIS WITH SYNC DEMOD PCA LEDS There are four green Light Emitting Diodes (LE Ds) on t he bottom left side of the Sync Demodulator PCA. They indicate various statuses and can be us ed to troubleshoot problems associa[...]

  • Page 32

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 The UV outpu t level of the lamp is not even across the entire length of the lamp. Some portions of the lamp shine slightly more brightly than other s. At the factory the position of t he UV lamp is adjusted to optimize the amount of [...]

  • Page 33

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR Figure 11-1: UV Lamp Adjustment 4. Finger tighten the thumbscrew NOTE DO NOT over tighten the thumbscre w 05944 Rev B 31 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED[...]

  • Page 34

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.1.2 Replacing the UV Lamp 1. Turn off the analyzer. 2. Disconnect the UV lamp from its power supply.  You can find the power supply conn ector by follo wing the two, white UV Lamp p ower supply wi res from the lamp to the powe[...]

  • Page 35

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11.3.2 REPLACING THE UV FILTER/LENS Note: Be careful not to leave thumbprints on the interior of the sample chamber. The various oils that make up fingerprints fluoresce brightly under UV light a nd will significantly affect the accu[...]

  • Page 36

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.3 REPLACING THE PMT, HVPS OR TEC The PMT should last for the lifetime of the analyzer. Ho wever, in some cases, the high voltage power supply (HVPS) or the thermo-electric cool er (TEC) may fail. To replace the PMT, the HVPS or t[...]

  • Page 37

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR  Because the threads of the plastic screws are ea sily da maged it is highly recom mended to use new screws when reassembling the unit. 9. Carefully take out the assembly consisting of t he HVPS, the gasket, preamp a ssembly an d [...]

  • Page 38

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.4 M100EU PMT HARDWAR E CALIBRATION ( FACTORY CAL ) THIS PROCEDURE SUPER SEDES THE ONE CONTAINED IN SECTION 11.6.3 OF THE M100E MANUAL - P/N 04145. The sensor module hard ware calibration adjusts t he slope of the PMT output wh en[...]

  • Page 39

    M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 05944 Rev B 37 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 11.4 TECHNICAL ASSISTANCE If this addendum and its trouble-shooting / repair secti ons do not solve your problems, technical assistance may be obtained from: Teledyne Instru[...]

  • Page 40

    TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 38 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:[...]

  • Page 41

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Softw are Documentation 05928 Rev F.0B Pg: A-1 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A - Version Specific Software Documentation APPENDIX A-1: MODEL 100E U SOFTWARE MENU TREES APPENDIX A-2: MODEL 100EU SETUP V ARIABLES AVAILABL E VIA SERIAL I/O APPENDI[...]

  • Page 42

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-2 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-1: M100E Software Menu Trees, Revision F.0B[...]

  • Page 43

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-3 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED ZE RO SPAN CO N C SAM PL E <TST TS T> RAN G E ST A B IL ST A B IL2 PR E S SAM P F L PM T NO R M P MT UV LA M P UV S T B LA M P R A T I O ST R . LG T DA R K P M T DA R K L[...]

  • Page 44

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-4 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 LO W HI G H ZE R O SPAN CO N C SA M P LE <T ST TS T > SE T U P CO MM DI A G VA R S (Se c on d a r y Se t u p M e n u) CFG DA S RA N G PA SS CLK MO RE ( Pr i m ary S [...]

  • Page 45

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-5 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED CFG  MODEL NAME  SERIAL NU MBER  SOFTWAR E REVISION  LIBRARY REVIS ION   iCHIP SOFTWARE REVISION 1   HESS EN PR OTOCOL REVISION 1  ACT[...]

  • Page 46

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-6 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 NAME EVENT PARAMETERS REPORT PERIOD NUMBER OF R ECORDS RS-232 REPORT CHANNEL ENAB LE CAL. HO LD CFG ACAL 1 1 Onl y a pp ears if Z/S valve or I Z S o p tion is installed. S[...]

  • Page 47

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-7 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED QUIET COMPUTER SECU RIT Y HESSEN PROT OC OL E, 7, 1 RS-485 MULTID ROP PR OTOCOL ENAB LE MO DEM ERRO R CH ECKIN G XON/XOFF HAND SHAKE HARD WAR E HANDSHA K E H AR DW A R E FI FO [...]

  • Page 48

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-8 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 INSTRUMEN T IP 5 GATEWA Y IP 5 SUBNET MASK 5 TCP PORT 3 DHCP INSTRUMENT IP GATEWAY IP SUBNET MASK TCP PORT 3 HOSTNAME 4 CFG ACAL 1 SETUP CL K PASS RNGE DAS MORE COMM VARS [...]

  • Page 49

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-9 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED . YES NO PMT DET WARNING UV LAMP WA RNING DARK CAL WAR NING IZS TEMP WAR N I NG BOX TEMP WARNING PMT TEMP WARNING RCELL TEM P WAR NI NG SAMPLE FLO W WAR NI NG SAMPLE PRESS WARN[...]

  • Page 50

    TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-10 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 4) SAMP LE LED 5) CAL LE D 6) FAUL T LED 7) AUDIBLE BEEPER 8) ELEC TEST 9) OPTIC TEST 10) PREAMP RANGE HIGH 11) ST SYSTEM OK 12) ST CONC V ALID 13) ST HIGH RANGE 14) ST Z[...]

  • Page 51

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-11 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-2: Setup Variables For Serial I/O, Revision F.0B Table A-1: M100EU Setup Variables, Revision F.0B M100EU Setup Variables for Latest Revi sion Setup Variable Numeric Unit[...]

  • Page 52

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-12 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 0.2 4 sample. FILT_SIZE Samples 240, 30 3 , 5 4 1–480 Moving average filter size. FILT_ASIZE Samples 20, 6 3 1–100 Moving average filter size in adaptive mode. FILT_DELTA PPM 0[...]

  • Page 53

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-13 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED O2_FILT_DELT A 10 % 2 0.1–100 Absolute change in O 2 concentration to shorten filter. O2_FILT_PCT 10 % 2 0.1–100 Relative change in O 2 concentration to shorten filter. O2_FILT[...]

  • Page 54

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-14 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 DARK_MOD E 5 — AUT O OFF, AUTO, CMND Dark calibration mode. OFF disables it; AUTO does it periodically; CMND do es it only when commanded. Enclose value in double quotes (“) wh[...]

  • Page 55

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-15 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED AUTO2 PHYS_RANGE1 PPM 2, 500 3 0.1–2500, 5–10000 3 Low pre-amp range. PHYS_RANGE2 PPM 22, 5500 3 0.1–2500, 5–10000 3 High pre-amp range. CONC_RANGE1 Conc 500, 5000 3 0.1–[...]

  • Page 56

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-16 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 RS232_MODE BitFlag 0, 3 5 0–65535 RS-232 COM1 mode flags. Add values to combine flags. 1 = quiet mode 2 = computer mode 4 = enable securit y 8 = enable hard ware handshaking 16 =[...]

  • Page 57

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-17 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 19200, 38400, 57600, 115200 MODEM_INIT2 — “AT Y0 &D0 &H0 &I0 S0=2 &B0 &N6 &M0 E0 Q1 &W0” Any character in the allowed character set. Up to 100 cha[...]

  • Page 58

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-18 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 RCELL_PROP 1/ºC 0.3 (prop. band = 3.3 ºC) 0–10 Reaction cell temper ature PID proportional coefficient. RCELL_INTEG — 0.005 0–10 Reaction cell temperature PID integral coef[...]

  • Page 59

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-19 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED DIM I2C_RESET_ENABLE — ON OFF, ON I 2 C bus automatic reset enabl e. CLOCK_FORMAT — “TIME=%H:% M:%S” Any character in the allowed character set. Up to 100 characters long. [...]

  • Page 60

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-20 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 2048 = enable Internet option 4096 = enable pre-am plified UV lamp monitoring 1 M100E. 2 M100ES. 3 M100E H. 4 M100EF . 5 RP84 00S. 6 Engineering firm ware only. 7 iChi p opti on. 8[...]

  • Page 61

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-21 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-3: Warnings and T est Functions, Revision F.0B Table A-2: M100EU Warning Messages, Rev ision F.0B Name 1 Message Text Description WSYSRES SYST EM RESET Instrument was po[...]

  • Page 62

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-22 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 Table A-3: M100EU Test Functions, Revision F.0B Name 1 Message Text Description RANGE RANGE= 500.0 PPB 3 SO2 RNG=500.0 PPB 3, 10, 11 D/A range in single or auto-ra nge modes. RANGE[...]

  • Page 63

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-23 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED calibration. HVPS HVPS=650 VOLTS High voltage power supply output. RCELLDUTY RCELL ON=0.00 SEC Reaction cell temperature control duty cycle. RCELLTEMP RCEL L TEMP=52.1 C Reaction c[...]

  • Page 64

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-24 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-4: M100Eu Signal I/O Definitions, Revision F.0B Table A-4: M100EU Signal I/O Definitions, Revision F.0B Signal Name Bit or Channel Number Description Internal inputs, U7[...]

  • Page 65

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-25 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED Control outputs, U21, J1008, pins 9 – 12 = bits 0 – 3, default I/O address 325 h ex 0–3 Spare Alarm outputs, U21, J1009, pins 1 – 12 = bits 4 – 7, default I/O add ress 32[...]

  • Page 66

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-26 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 MAINT_MODE 5 (inp ut) 0 = maintenance mode 1 = normal mode LANG2_SELECT 6 (input) 0 = select second language 1 = select first language (English) SAMPLE_LED 8 (output) 0 = sample LE[...]

  • Page 67

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-27 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED AGND_DARK 3 7 AGND reading duri ng dark cycles AGND_LIGHT 3 8 AGND reading duri ng light cycles VREF_DARK 3 9 VREF4096 readin g during dark cycles VREF_LIGHT 3 10 VREF409 6 reading[...]

  • Page 68

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-28 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 TEST_ OU TPUT, DATA_OUT_4 3 Test measurement output, Data output #4 I 2 C analog output (A D5321 ), default I 2 C address 18 hex LAMP_POWER 5 0 Lamp power (0–5V) 1 Optional. 2 M1[...]

  • Page 69

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-29 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED M100E MODBUS Register Map MODBUS Register Address (dec., 0-based) Description Units MODBUS Floating Point Input Registers (32-bit IEEE 754 format; read in high-wo rd, low-word orde[...]

  • Page 70

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-30 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 102 10 O 2 concentration during zero/ span calibration, just before computing new slope and offset % 104 10 O 2 slope — 106 10 O 2 offset % 108 10 O 2 sensor cell temperature [...]

  • Page 71

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-31 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 100 10 In O 2 calibration mode 101 10 O 2 cell temperature warning 200 11 In CO 2 calibration mode MODBUS Coil Registers (single-bit; read/write) 0 Maps to relay output signal 36 ([...]

  • Page 72

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-32 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-5: M100EU iDAS Functions, Revision F.0B Table A-5: M100EU DAS Trigger Events, Revision F.0B Name Description ATI ME R Automatic timer expired EXITZR Exit zero calibratio[...]

  • Page 73

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-33 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED SLOPE2 SO 2 slope for rang e #2 — OFSET1 SO 2 offset for range #1 mV OFSET2 SO 2 offset for range #2 mV CO2SLP 11 CO 2 slope — CO2OFS 11 CO 2 offset % O2SLPE 10 O 2 slope — O[...]

  • Page 74

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-34 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 1 M100E. 2 M100E H. 3 M100E U. 10 O 2 option. 11 CO 2 option. 12 SO 2 with O 2 correction option.[...]

  • Page 75

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-35 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-6: Terminal Command Designators, Rev ision F.0B Table A-7: Terminal Command Designators, Rev ision F.0B COMMAND A DDITIONAL COMM A ND SYNT AX DESCRIPTION ? [ID] Display [...]

  • Page 76

    TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-36 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 The command syntax follows the command type, sep arated by a space character. Strings in [brackets] are optional designators. The following key assignments also apply. TERMINAL KEY[...]

  • Page 77

    MODEL M100EU INSTRUCTION MANUAL Appendix B - Spare Parts Lists APPENDIX B - SPARE PARTS LISTS • 053600100 – M100EU Spare Parts List • 059460000 – M100EU Recommended Spares Stocking Levels 05929 Rev A B-1[...]

  • Page 78

    Appendix B - Spare Parts Lists M ODEL M100EU INSTRUCTION MANUAL B-2 05929 Rev. A[...]

  • Page 79

    M100EU Spare Parts List Part Numbe r Description 000940100 ORIFICE, 3 MIL, IZS 000940800 ORIFICE, 012 MIL, RXCELL 002690000 LENS, UV 002700000 LENS, PMT 002720000 FILTER, PMT OPTICAL, 330 NM 003290000 ASSY, THERMISTOR 005960000 AKIT, EXPEND, 6LBS ACT CHARCOAL 009690200 AKIT, TFE FLTR (FL19) ELEM, 47MM, (100) 009690300 AKIT, TFE FLTR ELEMENT, 47MM, [...]

  • Page 80

    M100EU Spare Parts List Part Numbe r Description 055560000 ASSY, VALVE, VA59 W/DIODE, 5" LEADS 055920000 ASSY, SO2 SENSOR, M100EU (KB) 055930100 DOC, W/SOFTWARE, M100EU 056080000 ASSY, HVPS, M100EU PMT 058020100 PCA, E-SERIES MOTHERBOARD, GEN 5 059200000 ASSY, UV LAMP, M100EU 061930200 PCA, 100EU, UV LAMP DRIVER, GEN-2 CN0000458 CONNECTOR, REA[...]

  • Page 81

    Teledyne Advanced Pollution Instrumentati on UNITS PA RT NO DESCRIPTION 1 2-5 6-10 11-20 21-30 000940800 Orifice, 12 Mil 1 2 4 4 002720000 Filter, 330 NM 1 2 3 013140000 Cool er Fan 1 1 2 4 4 013400000 P MT, SO 2 1 1 014080100 A ssy, HVPS, NOX/SOX 1 014610000 K it, Replacem ent Cooler 1 040010000 A ssy, Fan, Rear Panel, E Series 1 1 2 4 4 040030100[...]

  • Page 82

    THIS PAGE IS INTENTIONALLY LEFT BLANK[...]

  • Page 83

    Model 100EU Instruction Manual Add end um Appendix C – Warranty Repair Questio nnaire 05930 Rev A C-1 Appendix C – Warranty Repair Questionnaire CUSTOMER: _______ _______________ ___________ PHON E: _____________ __________________ _______________ ____ CONTACT NAME: __________ _______________ ___ FAX NO. _________ _______________ ______________[...]

  • Page 84

    Model 100EU Instruction Manual Addendum Appendix C – Warranty Repair Question nair e C-2 05930 Rev. A 3. WHAT IS TH E SAMPLE FLOW & S AMPLE PRESSURE W/SAMPLE INLET ON REAR OF MACHINE CAPPED ? SAMPLE FLOW - CC SAMPLE PRESS - IN-HG-A 4. W HAT ARE THE FAILURE SYMPTOMS? ______ _______________ __________________ _______________ ________ __________[...]

  • Page 85

    M100EU Manual Addendum Appendix D – Schematic Lis t Appendix D – Schematic List Table D-1: List of In cluded Electronic Schematics DOCUMENT # DOCUMENT TITLE 0506402 M100E U UV Ref PCA 05435 M100EU Internal PMT Preamp PCA 05466 M100EU Sync/Demod PCA 0591602 M100E U Bursting UV Lamp Driver Other schematics can be found in t he M 100E Operators Ma[...]

  • Page 86

    Appendix D – Schematic List M100EU Manual Addendum D-2 05931 Rev. A[...]