Toshiba M750 manual

[CONFIDENTIAL] Toshiba Personal Computer PORTÉGÉ M700 PORTÉGÉ M750 Maintenance Manual 3G & SmartCard (Rev B) Degitizer utility(Rev C) M750 (Rev D) TOSHIBA CORPORATION File Number 960-661 First Edit ion[...]

ii [CONFIDENT IAL] PORTÉGÉ M7 00/M750 Maintenance Man ual (960-661) Copyright © 2007 by Toshiba Corporation. All right s reserv ed . Under t he copyright laws, th is manual cannot be reproduced in any form without the prior written pe rmission of Toshiba. No patent liability is assumed with respect to t he use of the information contained herein[...]

PORTÉG É M700/M750 Mainte nance Manual ( 960-661) [CONFI DENTIAL ] iii Preface This maintenance manual describes how to pe rform hardware servic e m aintenance for the Toshiba Personal Computer PORTÉGÉ M700/M7 50. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and r[...]

iv [CONFIDENT IAL] PORTÉGÉ M7 00/M750 Maintenance Man ual (960-661) The manual is divided into t he following par ts: Chapter 1 Hardware Overview descri bes the T PORTÉGÉ M700/M750. system unit and each FRU. Chapter 2 Troubleshooting Procedures ex plains how t o diagnose and resolve FRU problems. Chapter 3 Test and Diagnosti cs describes how t [...]

PORTÉG É M700/M750 Mainte nance Manual (9 60-661) [CONFID ENTIAL ] v Conventions This manual uses the followin g formats to describe, identify, and highlight terms and operating procedures. Acrony ms On the first appearan ce and whenever nece ssary for clarificatio n ac ronyms are enclosed in parentheses following their defini tion. For example: [...]

vi [CONFIDENT IAL] PORTÉGÉ M700 /M750 Maintenance Manua l (960-661) Table of Contents Chapter 1 Hardware Overview 1.1 Features ............. ............. ............. .............. ............. ............. .............. ............. ......... ... 1-1 1.2 System Unit Block Diagram ....................... .............. ............. ......[...]

PORTÉG É M700/M750 Mainte nance Manual (9 60-661) [CONFID ENTIAL ] vii 2.16 Tablet pen Troubleshooting ...................... ............. ............. ................ .............. ....... 2-54 2.17 Touch screen Troubleshooting ............... ............. ................ .............. ................ ....... 2-56 2.18 Sound Troubleshoot[...]

viii [CONFIDE NTIAL] PORTÉGÉ M7 00/M750 Maintenance Man ual (960-661) 3.24 Floppy Disk Drive Utilities.................... ................ ............. ................ .............. ....... 3-60 3.25 System Configuration ....... ............. ................ ............. .............. ............. ............. ..... 3-65 3.26 Wireless LA[...]

PORTÉG É M700/M750 Mainte nance Manual (9 60-661) [CONFID ENTIAL ] ix 4.23 MDC ...... ............. ................ .............. ............. ............. ................ .............. ............. . 4-66 4.24 PC card slot ................. .............. ............. ... ............. ... ............. ............. ... ............. ..[...]

[CONFIDENTIAL] Chapter 1 Hardware Overview[...]

1 Hardware Overview 1-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [ CONFIDENTIAL] 1-iii Chapter 1 Contents 1.1 Features................................................................................................................... ....1-1 1.2 System Unit Block Diagram ............................................................................[...]

1 Hardware Overview 1-iv [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Figures Figure 1-1 Front of the computer ....................................................................................1- 6 Figure 1-2 System unit configuration..............................................................................1- 7 Figure 1-3 Sys[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-1 1.1 Features The Toshiba PORTEGE M700 ,M750 Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Sem iconductor (CMOS) technology extensively to provide compact size, minim um weight, low power usage and high reliability. T[...]

1 Hardware Overview 1-2 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) PORTÉGÉ M750 Equipped with Intel Cantiga GM as North Bridge, Intel ICH9-M/-E as South Bridge and Ricoh R5C847 as Card Controller.  VGA Controller An internal Graphics Controller in North Bridge is used.  Memory PORTÉGÉ M700 The computer comes with two PC[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-3 External monitor : Supported via an RGB connector.  Digitizer A digitizer is installed at the rear of LCD unit. The supplied tablet pen enables pen computing.  Tablet pen / Reserve pen The Tablet pen / Reserve pen can be used as a mouse by touching the displ[...]

1 Hardware Overview 1-4 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) One eSATA/USB combo port, which complies to. The USB 2.0 standard is provided. This port has eSATA (External Serial ATA) function. A power supply is always supplied to one USB ports on the left side of a computer.  IEEE 1394 port The computer comes with one IEE[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-5  Sound system The sound system is equipped with the following features: • speakers • Volume control • Stereo headphone jack • External microphone jack • Built-in microphone  Internal modem The computer contains a MDC, enabling data and fax comm uni[...]

1 Hardware Overview The computer is equipped with Bluetooth (V2.1+EDR) comm unications standard enable wireless connection between electronic devices such as computers and printers. It supports wireless communication switch.  Switch/Button The following switches and buttons are equipped. - Power on switch - Cross Function button - ESC/Rotation b[...]

1 Hardware Overview Rev B The system unit configuration is shown in figure 1-2. Figure 1-2-a M700 System unit configuration PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-7[...]

1 Hardware Overview Figure 1-3-b M750 System unit configuration 1-8 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

1 Hardware Overview 1.2 Sy stem Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Figure 1-4-a M700 System unit block diagram PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-9[...]

1 Hardware Overview Figure 1-5-b M750 System unit block diagram 1-10 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-11 The system unit is composed of the following m ajor components:  Processor PORTÉGÉ M700 Intel ® Core TM 2 Duo(Merom-4M or 2M) T7800 (2.60GHz),T7700 (2.40GHz),T7500 (2.20GHz) L2=4MB (M700 only) T7250 (2.00GHz) L2=2MB (M700 only) T5870(2.00GHz),T5670(1.8GHz),[...]

1 Hardware Overview 1-12 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) PORTÉGÉ M750 Tow memory slots capable of accepting DDR2-SDRAM 1024MB , 2048MB or 4096MB memory m odules for a maximum of 8GB. • 200-pin Small Outline DIMM • 1.8V operation • PC6400(DDR2-800) support  North Bridge PORTÉGÉ M700 • Intel 965:Crestline-[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-13 – PCI Bus I/F Rev2.3 (6 PCI REQ/GNT Pairs) – Integrated Serial ATA Host Controller (3 Prots,300MB/S) – Integrated IDE Controller (Ultra ATA 100/66/33) – Intel High Definition controller (Azalia) – USB 1.1/2.0 Controller 10 ports – Built-in LAN control[...]

1 Hardware Overview 1-14 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) – Serial Interrupt Function – Suspend/Resume control – Built –in RTC – GPIO – 672-ball 31×31×2.49 （ Max ） mm BGA Package  Cardbus controller PORTÉGÉ M700 (TI PCI8412ZHK) − PCI Interface(PCI Rev.2.3) − CardBus / Ultra media Controller (1[...]

1 Hardware Overview • Stereo headphone jack • External microphone jack • Built-in microphone  Modem Controller One MDC is used. This controller has the following functions: • One RJ11 port • Azalia MDC • V.92 (V.90) 56K Modem/FAX • Ring wake up support Rev B • Analog authoring is supported.  Internal LAN Controller • Etherne[...]

1 Hardware Overview 1-16 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) • Intel Shirley Peak a/b/g/n or Echo Peak a/b/g/n +WiMAX .  Bluetooth PORTÉGÉ M700 • V2.0 module • Antenna built-in PORTÉGÉ M750 • V2.1 module • Antenna built-in  Sensor • Thermal Sensor: One ADM1032ARMZ chip is used. • LCD Sensor:. • Ac[...]

1 Hardware Overview 1.3 3.5-inch Floppy Disk Drive (USB External) The 3.5-inch FDD is a thin, high-performance reliable drive that supports 720KB (formatted) 2DD and 1.44MB (formatted) 2HD disks. The FDD is shown in figure 1-4. The specifications for the FDD are listed in Table 1-1. Figure 1-6 3.5-inch FDD (USB External) Table 1-1 3.5-inch FDD spec[...]

1.4 2.5-inch Hard Disk Drive & SSD The removable HDD is a random access non-volatile storage device. It has a non-rem ovable 2.5-inch magnetic disk and mini-W inchester type magnetic heads. The computer supports a 80GB, 120GB , 160GB , 200GB , 250GB HDD and 64GB,128GB SSD. The HDD is shown in figure 1-5. Specifications are listed in Table 1-2. [...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-19 PORTÉGÉ M750 Item Specifications Maker Merker Code Parts Code HGST HTS543280L9SA00 G8BC00051080 80GB 5400rpm FUJITSU MHZ2080BH G8BC00052081 or ***82 HGST HTS543212L9SA00 G8BC00051120 120GB 5400rpm FUJITSU MHZ2120BH G8BC00052121 or ***22 HGST HTS543216L9SA00 G8B[...]

1 Hardware Overview 1-20 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 1.5 DVD-Super Multi Drive Optical Drive (ODD) The DVD Super Multi drive accommodates either 12 cm (4.72-inch) or 8 cm (3.15-inch) CD-ROM, DVD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW , DVD- RAM, DVD-R DL and DVD+R DL. The specifications are listed in Table [...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-21 Access time: Random (ms) CD-ROM DVD-ROM 150msec typ. 180msec typ. 150msec typ. 180msec typ. Supported Disks CD: CD/CD-ROM ( 12cm, 8cm), CD-R, CD-RW DVD:DVD-ROM, DVD-R, DV D+R, DVD-RW DVD+RW, DVD-RAM Supported Formats CD: Sound CD, CD-ROM, CD-R, CD-RW, Multi-sessi[...]

1 Hardware Overview 1-22 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) ATAPI Burst (MB/s) PIO Mode DMA Mode Ultra DMA Mode 16.6 (PIO MODE4) 16.6 (Multi Word Mode2) 33.3 (Ultra DMA Mode2) Data Buffer Capacity 2MB Access time: Random (ms) CD-ROM DVD-ROM 150msec typ. 180msec typ. Supported Disks CD: CD/CD-ROM ( 12cm, 8cm), CD-R, CD-RW [...]

1 Hardware Overview 1.6 Key board The keyboard is mounted 85(US)/87(UK) keys that consist of character key and control key, and in conformity with JIS. The keyboard is connected to mem brane connector on the system board and controlled by the keyboard controller. Figure 1-6 is a view of the keyboard. See Appendix E about a layout of the keyboard. F[...]

1 Hardware Overview 1.7 TFT Color Display The TFT color display consists of 12.1-inch WXGA LCD module. The LCD module used for the TFT color display uses a white LED backlight as the light source and can display a maximum of 16M colors with 1,200 x 800 resolution. The VGA in North Bridge can control internal and external WXGA support displays simul[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-25 1.8 Power Supply The power supply supplies many different voltages to the system board and perform s the following functions: 1. Judges that the DC power supply (AC adapter) is connected to the computer. 2. Detects DC output and circuit malfunctions. 3. Controls [...]

1 Hardware Overview 1-26 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Table 1-6 Power supply output rating (1/2) Type Device Name Voltage [V] AMT supported AMT not supported Remarks M-E3V 3.3 M Power line P Power line It is distinguishable by whether parts are carried in System board. Clock Gen IR25M-E1V 1.25 M Pow er line P Power [...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-27 Table 1-6 Power supply output rating (2/2) Type Device Name Voltage [V] AMT supported AMT not supported Remarks 3G 3G-E3V 3.3 E Power line SIM Card UIMPW R-E3V 3.3 E Power line IR5-PIV 1.5 P Power line Robson P3V 3.3 P Pow er line SPI Flash Mem ory(for BIOS) LAN-[...]

1 Hardware Overview 1-28 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 1.9 Batteries The computer has three types of batteries as follows:  Main battery pack  RTC battery The battery specifications are listed in Table 1-7. Table 1-7 Battery specifications Battery name Material Output voltage Capacity G71C0007M510/G71C0007M61 0[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-29 1.9.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer. The system charges [...]

1 Hardware Overview 1-30 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 1.9.3 RTC battery The RTC battery provides power to keep the current date, time and other setup information in memory while the com puter is turned off. Table 1-9 lists the charging time and data preservation period of the RTC battery. Table 1-9 RTC battery charg[...]

1 Hardware Overview PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 1-31 1.10 AC Adapter The AC adapter is also used to charge the battery. Table 1-10 lists the AC adapter specifications. Table 1-10 AC adapter specifications Parameter Specification G71C0006R210 (3-pin) / G71C0006Q210 (2-pin) Power 75W Input voltage 100V/240V Input fre[...]

1 Hardware Overview 1-32 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

FUNCTION TITLE F D SH.NO. DESIGNED BY 8 7 6 5 4 3 2 1 B PAGE NO. REV.MARK DRAWING.NO. TOSHIBA CORPORATION A C E 5T03655D F D B A C E TOSHIBA CONFIDENTIAL 2008.07.21 15:12 Ling.Yu FWGNS2 BLOCK DIAGRAM 003 003 00 360066393 Memory R3.3V I2C SPI 1 IGD-PGV MCV ADM1032 ICS9LPR501 B1.8V FCBGA 1329balls AN12948A I2C (Thermal MiniCARD (Wireless LAN I/F) E3.[...]

[CONFIDENTIAL] Chapter 2 Troubleshooting Procedures[...]

2 Troubleshooting Procedures 2-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

2 Troubleshooting Procedures PORTEGE M700/M750 Maintenance Manual (960-661) [ CONFIDENTIAL] 2-iii Chapter 2 Contents 2.1 Troubleshooting ..........................................................................................................2- 1 2.2 Troubleshooting Flowchart ........................................................................[...]

2 Troubleshooting Procedures 2-iv [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 2.9 Display Troubleshooting ..........................................................................................2-41 Procedure 1 Diagnostic Test Program Execution Check ...............................2-41 Procedure 2 Connector Check and Replacement[...]

2 Troubleshooting Procedures PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 2-v 2.18 Sound Troubleshooting ............................................................................................2-58 Procedure 1 Diagnostic Test Program Execution Check ...............................2-58 Procedure 2 Connector Check ...............[...]

2 Troubleshooting Procedures 2-vi [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Figures Figure 2-1 Troubleshooti ng flowchart ..................................................................................2-3 Figure 2-2 Debug port (Boot mode) error status .................................................................2-19 Table[...]

2 Troubleshooting Procedures Rev B 2 2.1 Troubleshooting Chapter 2 describes how to determine if a Fi eld Replaceable Unit (FRU) in the com puter is causing the computer to malfunction. The FRUs covered are: 1. Power Supply 2. System Board 3. USB Floppy Disk Drive 4. Hard Disk Drive 5. Keyboard/Dual point 6. Touch pad 7. Display 8. Optical Drive 9.[...]

2 Troubleshooting Procedures 2-2 [CONFIDENTIAL] PORTEGE M70 0/M750 Mainten ance Manual ( 960-661) 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide for determ ining which FRU malfunctions. Before going through the flowchart steps, check the following:  Ask the user if a password is registered and, if it is, ask him or her [...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-3[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) 2-4 [CONFIDENTIAL] PORTEGE M70 0/M750 Mainten ance Manual ( 960-661)[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-5 If the diagnostics program cannot detect an erro r, the problem may be interm ittent. The Running Test program should be executed severa l times to isolate the problem . Check the Log Utilities function to confirm which diagnostic test detected an err[...]

2 Troubleshooting Procedures Rev B 15. If an error is detect ed on the sound test, perform the Sound Troubleshooting Procedures in Section 2.18 16. If an error is detected on Bridge Media, perfor m the Bridge Media slot Troubleshooting Procedures in Section 2.19. 17. If an error is detected on Fingerprint sensor, perform the Fingerprint sensor Trou[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-7 2.3 Power Supply Troubleshooting The power supply controls many functions and components. To determ ine if the power supply is functioning properly, star t with Procedure 1 and continue with the other Procedures as instructed. The procedures described[...]

2 Troubleshooting Procedures 2-8 [CONFIDENTIAL] PORTEGE M70 0/M750 Mainten ance Manual ( 960-661) Procedure 2 Error Code Check If the power supply microprocessor detects a malfunction, it indicates the error code as shown below. The error code begins with the least significant digit. Table 2-3 Error code Error code Where Error occurs 1*h AC Adaptor[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-9 Check 1 Compare the patterns in the hexadeci mal error code to the tables below.  AC Adaptor Error code Meaning 10h AC Adaptor output voltage is over 16.5V. 11h Express Port Replicator voltage is over 16.5V. 12h Current from the DC power supply is [...]

2 Troubleshooting Procedures 2-10 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 )  E5V output Error code Meaning 50h E5V voltage is over 6.00V when the computer is powered on/off. 51h E5V voltage is under 4.50V when the computer is powered on. 52h E5V voltage is under 4.50V when the computer is booting up. 54h E5V voltage is un[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-11  PPV output Error code Meaning 90h PPV voltage is over 1.80V when the computer is powered on/off. 91h PPV voltage is under 0.32V when the computer is powered on. 92h PPV voltage is under 0.32V when the computer is booting up.  1R05-P1V output E[...]

2 Troubleshooting Procedures 2-12 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 )  1R05-P1V output Error code Meaning E0h 1R05-P1V voltage is over 1.26V when the computer is powered on/off. E1h 1R05-P1V voltage is under 0.89V whe n the computer is powered on . E2h 1R05-P1V voltage is under 0.89V whe n the computer is booting up[...]

2 Troubleshooting Procedures Procedure 3 Connection Check The power supply wiring diagram is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Disconnect the AC powe r cord from the wall outlet. Check the power cable for breaks. If the power cord is damaged, c onnect a new AC power cord. If there is no damage, go to C[...]

2 Troubleshooting Procedures 2-14 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Procedure 4 Charge Check The power supply may not charge the battery pack. Perform the following procedures: 1. Reinstall the battery pack. 2. Attach the AC adaptor and turn on the pow er. If you cannot turn on the power, go to Procedure 5. 3. Run th[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-15 Procedure 5 Replacement Check The system board processor module m ay be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures . Check the connection between the AC adaptor and syst em boa[...]

2 Troubleshooting Procedures 2-16 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board and CPU are defective or not functioning properly. Start with Procedure 1 an d continue with the other procedures as instructed. The procedures described i[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-17 Procedure 1 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. The IRT tests each IC on the system board and initializes it.  If an error message is shown on the display, [...]

2 Troubleshooting Procedures 2-18 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Check 2 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) th rough (17), (22) or (23) appears, go to Procedure 4. If the error message (18) appears[...]

2 Troubleshooting Procedures Procedure 2 Debugging Port Check (Boot Mode) Check the D port status by a serial port test. Th e tool for serial port test is shown below. Figure 2-2 Debug port (Boot mode) error status The test procedures are follows: 1. Make "W3400" of system board short-circ uited with a wire. As for the position of W3400, [...]

2 Troubleshooting Procedures 4. Boot the computer in DOS mode. 5. Execute GETDPORT.COM in the text menu in CPU REAL mode. (Insert the FD for starting D port into FDD and input “FD starting drive:>dport”.) The D port status is displayed in the following form; 5. When the D port status is FFFF (normal stat us), go to Procedure 4. When the D po[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-21 Table 2-5 Debug port error status (1/6) D port status In sp ection items Target device IC number System BIOS Boot block processing setup of CPU , Initialization of MCH , Initialization of ICH , EC access check, setup of PIT, Initialization of ICH and[...]

2 Troubleshooting Procedures 2-22 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Table 2-5 Debug port error status (2/6) D port status Insp ectio n items Target de vice IC number System BIOS IRT processing F100 setup of CPU , Initialization of ICH, MCH and Super I/O, setup of SD controller, setup of PIT CPU, ICH(PCI Register, PIT[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-23 Table 2-5 Debug port error status (3/6) D port status Insp ectio n items Target de vice IC number F106 Initialization of ICH (PIT), PIT initialization error, check of CPU, check of ROM data, setup of SMI, Distinction of part number data, check of CMO[...]

2 Troubleshooting Procedures 2-24 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Table 2-5 Debug port error status (4/6) D port status Insp ectio n items Target de vice IC number F10B setup of PCI Express Card, setup of HDD ICH(PCI Register, MEM I/O, IDE Controller), EC/KBC(EC), HDD IC1600 (ICH, HDD Cont.) CN1900 (HDD Conn.) IC32[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-25 Table 2-5 Debug port error status (5/6) D port status Insp ectio n items Target de vice IC number F118 setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F119 setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F11A setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F11B set[...]

2 Troubleshooting Procedures 2-26 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Table 2-5 Debug port error status (6/6) D port status Insp ectio n items Target de vice IC number F125 setup of HDD HDD, ICH(IDE Controller) IC1600 (ICH, HDD Cont. ) CN1900 (HDD Conn.) F126 setup of a display VGA IC1200 (VGA) F127 setup of RAM data R[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-27 NOTE: Status outputted by the test means the la st error detected in the debug port test.[...]

2 Troubleshooting Procedures 2-28 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Di agnostic Test Menu. Refer to Chapter 3, Tests and Diagnostics, for more inform ation on how to perform these tests. 1. System test 2. Memory test 3. Keyboard [...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-29 Procedure 4 Replacement Check The system board connectors may be disconnect ed. Disassemble the com puter following the steps described in Chapter 4, Replacement Procedures and perform Check 1. Check 1 Visually check for the following: a) Cracked or [...]

2 Troubleshooting Procedures 2-30 [CONFIDENTIAL] PORTEG E M700/M750 Maint enance Manu al (960-661 ) 2.5 USB FDD Troubleshooting This section describes how to determine if the USB FDD is functioning properly. Perf orm the steps below starting with Procedure 1 a nd continuing with the other procedures as required. Procedure 1: USB FDD Head Cleaning C[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-31 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about th e diagnostics test procedures. Floppy di[...]

2 Troubleshooting Procedures Procedure 3 Connector Check The USB FDD is connected to the System Board. Check 1 When using the USB port, make sure the USB FDD cable is firmly connected to CN4612 , CN4611 or CN4610 on the System board. If any of the connections are loose, re connect firmly and repeat Procedure 2. If any of the connections is damaged,[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-33 2 2.6 HDD Troubleshooting This section describes how to determine if the HDD is functioning properly. Perform the steps below starting with Procedure 1 and con tinuing with the other procedures as required. Procedure 1: Message Check Procedure 2: Par[...]

2 Troubleshooting Procedures 2-34 [CONFIDENTIAL] PORTEGE M700/M 750 Mainten ance Manual ( 960-661) Procedure 2 Partition Check Insert the Toshiba DOS system disk and re start the com puter with U key holding down. Perform the following checks: Check 1 Type C: and press Enter . If you cannot change to drive C, go to Check 2. If you can change to dri[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-35 Procedure 3 Format Check The computer’s HDD is formatted using the low level format program and the DOS FORMAT program. To format the HDD, start with Check 1 below and perform the other steps as required. Check 1 Format the HDD and transfer system [...]

2 Troubleshooting Procedures 2-36 [CONFIDENTIAL] PORTEGE M700/M 750 Mainten ance Manual ( 960-661) Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about the HDD test [...]

2 Troubleshooting Procedures Procedure 5 Connector Check an d Replacement Check The HDD may be disconnected, or the HDD, HDD cable or system board may be dam aged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: Check 1 Make sure the HDD is firmly connected to CN1900 on t[...]

2 Troubleshooting Procedures 2.7 Keyboard Troubl eshooting To determine if the computer’s keyboard or touch pad is functioning properly, perform the following procedures. Start with Procedure 1 an d continue with the other procedures as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement [...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-39 Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures .[...]

2 Troubleshooting Procedures 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute th[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-41 Check 2 Touch Pad or the cable may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures . If the problem still oc curs, perform Check 3. Check 3 Touch pad board or the cable may be faulty. Replace it wi[...]

2 Troubleshooting Procedures 2.9 Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Cable Check Procedure 3: Replacement[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-43 Procedure 3 Replacement Check The LCD module and system board are connect ed to display circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures. Check 1 Replace the LCD cable with a new one following the instructi[...]

2 Troubleshooting Procedures 2.10 Optical Drive Troubleshooting To check if the optical drive (each CD-ROM , CD-R/RW+DVD-ROM drive) is defe ctive or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Diagnostic Test Program Execution Check Procedure 2 Connector Check and Replacement Check Procedure 1 Diagnostic T[...]

2 Troubleshooting Procedures 2.11 LAN Troubleshooting This section describes how to determine if the computer’s L AN is functioning properly. Perform the steps below starting with Procedure 1 and continue with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check[...]

2 Troubleshooting Procedures 2.12 Bluetooth Troubleshooting This section describes how to determ ine if th e computer’s Bluetooth is functioning properly. Perform the steps below starting with Procedure 1 and continui ng with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connection Check and [...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-47 Check 2 The Bluetooth module may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 3. Check 3 The Bluetooth cable may be damaged. [...]

2 Troubleshooting Procedures 2.13 Wireless LAN Troubleshooting This section describes how to determine if the computer’s Wireless LAN is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Transmitting-Receiving Check Procedure 2: Antenna Connection Check Proce[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-49 Check 1 Make sure the wireless LAN board is firmly connected to CN2600 on the system board. If the connector is disconnected, connect it firmly. If the wireless LAN board is still not functioning prop erly, perform Check 2. Check 2 Make sure the wire[...]

2 Troubleshooting Procedures 2.14 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Modem test in the LAN/Mod[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-51 Check 2 Modem cable or MDC cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Chapter 4, Replacement Procedure . If the problem sti[...]

2 Troubleshooting Procedures 2.15 Web camera Troubleshooting To check if the computer’s web camera is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Check on Windows OS Procedure 2: Connector Check and Replacement Check Procedure 1 Check on Window s OS The web camera checks operating normally usi n[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-53 Check 3 The web camera/digitizer/fingerprint sensor /sw board cab le may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures . If the problem still exists , perform Check 4. Check 4 The system board m[...]

2 Troubleshooting Procedures 2-54 [CONFIDENTIAL] PORTEGE M700/M 750 Mainten ance Manual ( 960-661) 2.16 Tablet Pen Troubleshooting To check if the Tablet Pen is defective or not, follow the troubleshooting procedures below as instructed. CAUTION: Use the Tablet Pen supplied to this model. Procedure 1: Check on Windows Vista Procedure 2: Tablet pen [...]

2 Troubleshooting Procedures Procedure 3 Connector Check and Replacement Check The Digitizer is connected to the system board as below. Check 1 If any of the connections are loose, reconnect firmly and repeat Procedure 1and 2. If there is still an error, go to Check 2. Check 2 The Digitizer may be damaged. Replace it with a new one following the in[...]

2 Troubleshooting Procedures 2-56 [CONFIDENTIAL] PORTEGE M700/M 750 Mainten ance Manual ( 960-661) 2.17 Touch screen Troubleshooting To check if the touch screen is defective or not, follow the troubleshooting procedures below as instructed. CAUTION: Use the touch screen supplied to this model. Procedure 1: Check on Windows Vista Procedure 2: Touch[...]

2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check The Digitizer is connected to the system board as below. Check 1 If any of the connections are loose, reconnect firmly and repeat Procedure 1. If there is still an e rror, go to Check 2. Check 2 The touch screen may be damaged. Replace it with a new one following the ins[...]

2 Troubleshooting Procedures 2.18 Sound Troubleshooting This section describes how to determine if the computer’s sound f unctions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check Proc[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-59 Procedure 3 Replacement Check  If headphone does not work properly, perform check 1.  If external microphone does not wo rk properly, perform check 2.  If speaker does not work properly, perform check 3.  If internal microphone does not w[...]

2 Troubleshooting Procedures 2.19 Bridge media Slot Troubleshooting This section describes how to determine if the computer's Bridge m edia functions are functioning properly. Perform the steps below star ting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Check on Windows OS Procedure 2: Connector Check an[...]

2 Troubleshooting Procedures 2.20 Fingerprint sensor Troubleshooting CAUTION : To delete the account for confir ming the fingerprint operation, it is necessary to log on by the account wi th the management authority. If the password has been set to log on, ask the Log-ON password to the user. To check if the Fingerprint sensor work s correctly or n[...]

2 Troubleshooting Procedures 2-62 [CONFIDENTIAL] PORTEGE M700/M 750 Mainten ance Manual ( 960-661) Procedure 1 Setting Windows Log-ON password 1. Open [User Account] from [Control Panel]. 2. Click [User Account]. 3. Click the icon of the account (user’s na me) that you want to set the password. 4. Click “Create Account”. 5. Type a password in[...]

2 Troubleshooting Procedures 7. When the Store to Sensor screen is displa yed, check Store fingerpri nt to Sensor. Click Finish to complete fingerprint registration. Procedure 3 Authentication of fingerprint 1. Turn on the computer to start up Windows. 2. In the Windows logon window, put lightly the first joint of your finger registered and slide y[...]

2 Troubleshooting Procedures Procedure 4 Connector Check and Replacement Check The Fingerprint sensor is connected to the system board as below. Check 1 If any of the connections are loose, re connect firmly and repeat Procedure 1 to 3 . If there is still an error, go to Check 2. Check 2 The Fingerprint sensor may be dama ged. Replace it with a new[...]

2 Troubleshooting Procedures PORTEGE M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 2-65 2.21 3G Troubleshooting This section describes how to determine if the computer’s 3G is functioning properly. Perform the steps below starting with Procedure 1 and continui ng with the other procedures as required. Procedure 1: Transmitting-Receivi[...]

2 Troubleshooting Procedures Procedure 2 Antenna Connection Check The 3G wiring diagram is shown below: Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the 3G antenna cables are firmly connected to the 3G car[...]

2 Troubleshooting Procedures 2.22 SmartCard Slot Troubleshooting (SmartCard model only) This section describes how to determine if the co mputer's Smar tCard functions are functioning properly. Perform the steps below star ting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Check on T&D Procedure 2: Con[...]

[CONFIDENTIAL] Chapter 3 Tests and Diagnostics[...]

3 Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTEGE M700/M750 Main tenance Man ual (960-661) 3[...]

3 Tests and Diagnostics PORTEGE M700/M750 Mainte nance Ma nual (960-661) [CONFIDENTIAL] 3-iii Chapter 3 Contents 3.1 The Diagnostic Test ................................................................................................... 3-1 3.1.1 Diagnostics menu ................................................................................. 3-1 [...]

3 Tests and Diagnostics 3-iv [CONFIDENTIAL] PORTEGE M700/M750 Main tenance Man ual (960-661) Subtest 3 Wireless communication switch ................................ 3-45 Subtest 4 USB Port Select menu ....................................... 3-45 Subtest 5 LED ............................................................................ 3-46 Subtest[...]

3 Tests and Diagnostics PORTEGE M700/M750 M aintenance Man ual (960-661) [CONFIDENTIAL ] 3-v 3.289.2 Modem test ......................................................................................... 3-83 3.28.3 Bluetooth test...................................................................................... 3-84 3.28.4 IEEE1394 test .........[...]

3 Tests and Diagnostics 3-vi [CONFIDENTIAL] PORTEGE M700/M750 Main tenance Man ual (960-661) Tables Table 3-1 Subtest names .................................................................................................... 3-13 Table 3-2 Error codes and error status names .................................................................... 3-36 T[...]

3 Tests and Diagnostics PORTEGE M700/M750 M aintenance Man ual (960-661) [CONFIDENTIAL ] 3-vii[...]

3 Tests and Diagnostics Rev B 3 3.1 Repair test program This chapter explains how to use the Repair test programs to test the functions of the computer’s hardware modules. The Repair test program s are stored on some Diagnostic Disks. There are Service Program Modules (DIAGNOSTIC MENU) and the Test Program Modules (The Repair test program) on the[...]

3 Tests and Diagnostics Rev B  REAL TIMER TEST  NDP TEST  EXPANSION TEST  CD-ROM/DVD-ROM TEST  ERROR RETRY COUNT SET [FDD & HDD] The ONLY ONE TEST MENU contains the following functional tests:  Pressed Key Display  Touch Pad  Wireless comm unication switch  USB Port Select menu  LED  Button  Acceleration sens[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-3  A microphone (Sound test)  Headphones (Sound test)  A cleaning kit to clean the floppy disk drive heads (Head Cleaning)  An exclusive modem test jig (Nitto Electric Manufacture Co.,Ltd-m ade QE2000P01) (Modem test)  A module cable and RJ11 conn[...]

3 Tests and Diagnostics Rev B 3.1.2 H/W (Hardware) initial information setting tool The H/W initial inform ation setting tool consists of the following programs.  Eentry of the DMI infomation  DMI information save  DMI information recovery You will need the following equipment to perform some of the program s.  Repair test program Disk [...]

3 Tests and Diagnostics Rev B 3.2 Executing the Repair test program To start the Repair test program, follow these steps: 1. Insert the Repair test program disk in the USB floppy disk drive or Optical disk drive. 2. Turn on the computer while pressing U key. The following menu appears. NOTE : The following menu is an example when Repair test progra[...]

3 Tests and Diagnostics 3.2.1 Diagnostics menu (T&D) To execute this program, press 3 Repair Main and press Enter in the startup menu, press Enter . The following menu appears. TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTICS MENU : 1 - DIAGNOSTIC TEST 2 – ONLY ONE TEST 3 - 4 - HEAD CLEANI[...]

3 Tests and Diagnostics Set the highlight bar to 1 , and press Enter . The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTIC TEST MENU : 1 - SYSTEM TEST 2 - MEMORY TEST 3 - KEYBOARD TEST 4 - DISPLAY TEST 5 - FLOPPY DISK TEST 6 - PRINTER TEST [It is not s[...]

3 Tests and Diagnostics Select the option you want to execute and press Enter . When you select 1- SYSTEM TEST , the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX ERROR COUNT : XXXXX WRITE DATA : XX READ DATA : XX ADDRESS : XXXXXX[...]

3 Tests and Diagnostics Rev B Selecting YES of ERROR STOP stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry These three selections have the following functions respectively: 1. Terminates the t[...]

3 Tests and Diagnostics Rev B 3.3 Setting of the hardware configuration To execute this program, 1, Repair Initial config set and press Enter in the startup m enu, press Enter and follow the directions on the screen. The H/W initial inform ation setting tool consists of three subtests. Move the highlight bar to the subtest you want to execute and p[...]

3 Tests and Diagnostics Rev B 7. “ Create DMIINFO TXT (Y/N) ? ” is displayed. Press Y , then the DMI information (text data) is written to the Floppy disk, etc. • Setting of the HWSC • Setting of the UUID • Display of the DMI information (including UUID) After completion of the above settings, H/W configuration & DMI information are a[...]

3 Tests and Diagnostics Rev B 3.4 Heatrun Test To execute this program, press 2 , Repair Heatrun and press Enter in the startup menu, press Enter . After selecting this test, the same subtests as 3.23 Running Test are executed successively. For more details on the procedure and test content, refer to Running Test. When the heatrun test ends normall[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-13 3.5 Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) No. Test Name Subtest No. Subtest Name 1 SYSTEM 01 02 03 04 05 ROM checksum Fan ON/OFF Geyserville Quick charge DMI read 2 MEM[...]

3 Tests and Diagnostics 3-14 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Table 3-1 Subtest names (2/2) No. Test Name Subtest No. Subtest Name 6 PRINTER ［ It is not supported ］ 01 02 03 Ripple pattern Function Wraparound 7 ASYNC 01 02 03 FIR/SIR Point to point (send) FIR/SIR Point to point (receive) Wraparound (board) 8 HARD DI[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-15 3.6 System Test To execute the System Test, select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 ROM checksum This subtest executes [...]

3 Tests and Diagnostics 3-16 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Subtest 04 Quick charge This subtest checks the status for the quick charge. Subtest 05 DMI read This subtest displays the information in the Flash-ROM in the following format. *** DMI Data Display Ver X.XX *** Model Name : XXXXXXXXXXX Version Number : XXXXXX[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-17 3.7 Memory Test To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Conventional memory This subtest wr[...]

3 Tests and Diagnostics 3-18 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.8 Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Pressed key code display When a[...]

3 Tests and Diagnostics 3.9 Display Test To execute the Display Test, select 4 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 VRAM read/write for VGA This subtest writes the constant data (AAh and 55h) to the video RAM. The da[...]

3 Tests and Diagnostics Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes. To change the mode, press Enter . [Mode 12] [Mode 13] [Mode 3] [Mode 111 640*480 64K] [Mode 112 640*480 16M] [Mode 114 800*600 64K] [Mode 115 800*600 16M] [Mode 117 1024*768 64K] [Mode 118 1024*768 16M] The display below appear[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-21 Subtest 06 “H” pattern display This subtest displays a full screen of “H” patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHH[...]

3 Tests and Diagnostics 3.10 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD because the contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter and follow the dire[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-23 Select the number of the subtest you want to execute and press Enter . The following message will appear during the floppy disk test. FLOPPY DISK IN PROGRESS XXXXXXX xxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS [...]

3 Tests and Diagnostics 3.11 Printer Test NOTE : Printer Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. NOTE : An IBM compatible printer must be connected to the system to execute this test. Also, printer port wraparound connector must b[...]

3 Tests and Diagnostics Subtest 02 Function This subtest is for IBM compatible printers, and tests the following f unctions: Normal print Double-width print Compressed print Emphasized print Double-strike print All characters print This subtest prints the various print types shown below: Subtest 03 Wraparound NOTE : To execute this subtest, a print[...]

3 Tests and Diagnostics 3-26 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.12 Async Test NOTE : Async Test is not supported for this model. To execute the Async Test, select 7 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen. Move the highlight bar to the subtest you want to execute and [...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-27 3.13 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter , and follow the directions on the screen. CAUTION : The contents of the hard disk will be erased when subtest 02, 03, 04, 06, 08 or 09 is executed. Before [...]

3 Tests and Diagnostics 3-28 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3. The Hard Disk Test message will appear after you respond to the Detail Status prompt. Select the number of the subtest you want to execute and press Enter. The following message will appear during each subtest. HARD DISK TEST XXXXXXX XXX DIAGNOSTIC TEST VX[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-29 Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder and then reads the data while moving from cylinder to cylinder. (Tests the data interference in the neighbor track.) Worst pattern data C[...]

3 Tests and Diagnostics 3-30 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3 3.14 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Real time A new date and[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-31 Subtest 03 Real time carry CAUTION : When this subtest is executed, the current date and time are erased. This subtest checks the real time clock increments, m aking sure the date and time are displayed in the following form at: Current date : 12-31-1999 Curr[...]

3 Tests and Diagnostics 3-32 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.15 NDP Test To execute the NDP test, select 10 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 NDP This test checks the following functions of NDP:  Control word  Status word  Bus  Addition  Mul[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-33 3.16 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 PCMCIA wrap around [It is not supported ] CAUTION : PCMCIA wraparound test is not supported for this m[...]

3 Tests and Diagnostics 3-34 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Subtest 02 RGB monitor ID NOTE: To execute this subtest, an external monitor with monitor ID function is required. Connect the external monitor to the PC for the test of ID acquisition. The judgment of acquisition is based on the panel data. In simultaneous d[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-35 3.17 CD-ROM/DVD-ROM Test NOTE : CD-ROM/DVD-ROM Test is not supported for this model. NOTE : For the subtest 01, 02 and 03, use the TOSHIBA CD-ROM TEST DISK TDY-01 or ABEX TEST CD-ROM TCDR-702 and DVD-ROM TEST DISK TSD-1. For the subtest 04, use a CD-RW on the[...]

3 Tests and Diagnostics 3-36 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.18 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the DIAGNOSTIC TEST. Table 3-2 Error codes and error status names (1/3) Device name Error code Error status name (Common) FF Data Compare Error System 01 03 04 0[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-37 Table 3-2 Error codes and error status names (2/3) Device name Error code Error status name FDD 01 02 03 04 08 09 10 20 40 80 60 06 EE FDD - BAD COMMAND ERROR FDD - ADDRESS MARK NOT FOUND FDD - WRITE PROTECTED FDD - RECORD NOT FOUND FDD - DMA OVERRUN ERROR FD[...]

3 Tests and Diagnostics 3-38 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Table 3-2 Error codes and error status names (3/3) Device name Error code Error status name (HDD) CC E0 0A EE DA 12 HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR NDP 01 02 03 04 05 06 NDP - NO C[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-39 3.19 Hard Disk Test Detail Status When an error occurs in the hard disk test, the following message is displayed: HDC status = XXXXXXXX Detailed information about the hard disk test error is displayed on the screen by an eight-digit number. The first four dig[...]

3 Tests and Diagnostics 3-40 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Table 3-4 Error register contents Bit Name Description 7 BBK (Bad block mark) “0” … Not used. “1” … A bad block mark is detected. 6 UNC (Uncorrectable) “0” … There is no uncorrectable data error. “1” … Uncorrectable data error has been[...]

3 Tests and Diagnostics Rev D 3.20 ONLY ONE TEST 3.20.1 Program Description This program tests the unique functions of this model. 3.20.2 Operations Select test 2 from the DIAGNOSTIC MENU and press Enter . The following menu appears in the display. PORTÉGÉ M700 ################################################################# ######## ONLY ONE TE[...]

3 Tests and Diagnostics Rev D PORTÉGÉ M750 ################################################################# ######## ONLY ONE TEST Menu (XXXXXXXXX) ######## ################################################################# * * * 1 ............ Pressed Key Display * * 2 ............ Touch Pad * 3 ............ Wireless communication switch * * 4 .[...]

3 Tests and Diagnostics Subtest 1 Pressed key display When you execute this subtest, the keyboard layout is drawn on the display as shown below. When any key is pressed, the corresponding key on the screen changes to the key character that was pressed. Holding a key down enables the auto-repeat function that causes the key’s display character to [...]

3 Tests and Diagnostics Subtest 2 Touch Pad This subtest checks the functions of the touch pad as shown below. A) Direction and parameter B) Switching function check. This test displays the response from the touch pad and touch pad switch. When moving your finger on the touch pad towards the upper left, the < POINTING > display changes accord[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-45 Subtest 3 Wireless communication switch This subtest checks if the Wireless comm unication switch works properly. If the test is started with the switch ON, following message appears in the display. Wireless communication switch is set to a start position (OF[...]

3 Tests and Diagnostics 3-46 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Subtest 5 LED This subtest checks if each LED lights properly. The following m essage appears in the display in order. Follow the instructions in the display to execute the test. [HDD Access LED test] Press any key and following message appears in the display[...]

3 Tests and Diagnostics Subtest 6 Button This subtest checks if the buttons in the following figure work properly. The following message appears in the display. Presses in the direction of 4 corner and the center X 1 2 3 4 5 * * * * * Press Function button! PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-47[...]

3 Tests and Diagnostics 3-48 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Step 1 X 1 2 3 4 5 * * *. * * * Cross Function button is pushed in the direction of center, upper, lower, left, and right. OK m essage appears in the display if the test ends without an error. Press any key return to each Steps if NG! or Press any key message[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-49 The following message appears in the display. * < ------ Volume Down * -------- > Volume Up! Step5 Volume dial is turned to the left. OK message appears in the display if the test ends without an error. Press any key return to each Steps if NG! or Press[...]

3 Tests and Diagnostics Subtest 7 Acceleration sensor This subtest detects and corrects the each axis (X, Y, Z). NOTE: Make sure that this subtest is executed on the following condition: 1. Flat desk with vertical plane to get the stability of machine. 2. The vertical wall or plane is necessary. 3. Prevent the machine from shake or shock. 3-50 [CON[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-51 When this subtest is selected, the following message appears in the display. The heaven surface establishes in the upper direction Press [Enter] key NOTE : Be sure to execute the test with the display panel opened. Set the machine on the flat desk. Then press[...]

3 Tests and Diagnostics Rev B Subtest 8 Docker Dock/Undock This subtest is executed with an Slim Port Replicator II. installed. Press Enter while pushing the eject button of the Slim Port Replicator II. the following message appears. Pushing Eject-SW, and press [Enter] Key Press Enter without pushing the eject button of the Slim Port Replicator II.[...]

3 Tests and Diagnostics Rev C Subtest B Intel AMT It checks whether the Intel AMT corde versions information are written. Intel Kedron is required for an Intel AMT check. BIOS should be Intel AMT correspondence. Subtest C Degitizer utility NOTE : 1. To perform this subtest, connect the AC adapter. 2. While performing this test, don't turn off [...]

3 Tests and Diagnostics 3-54 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Then the test returns to the ONLY ONE TEST menu automatically after a while. Rev D Don't turn off the power by any means until the ONLY ONE TEST m enu appears again. The following error message is displayed when the digitizer is out of order. “Press an[...]

3 Tests and Diagnostics Rev D Return : Get ATR failed! If it is NG, the following message will com e out. 02SCR Initial failed!!! SD Card (R5C847 Writh/Read) (PORTÉGÉ M750 only) The functional check of SD Card. Enter the E key and insert an SD card. Pressing any key will start the test. If the test result is O.K., remove the SD card. If it is NG,[...]

3 Tests and Diagnostics 3-56 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.21 Head Cleaning 3.21.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations. A cleaning kit is necessary to perform this program. 3.21.2 Operations 1. Selecting test 4 from the DIAGNOSTI[...]

3 Tests and Diagnostics 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk, or output the data to a printer or the display. NOTE : Connect USB FDD, when you perform the DIAGNOSTIC PROGRAM from the CD-RO[...]

3 Tests and Diagnostics 3.22.2 Operations 1. Select 5 and press Enter in the DIAGNOSTIC MENU, the error information is displayed in the following format: XXXXX ERRORS CNT TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] 001 FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED 001 FDD 01 0000 180 00001 00 00 0000 FDD-TIME OUT ERROR Error count Pas[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-59 3.23 Running Test 3.23.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02) 3. Display test (subtest 01) 4. Real timer test (subtest 02) 5. HDD test (subtest [...]

3 Tests and Diagnostics 3-60 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.24 Floppy Disk Drive Utilities 3.24.1 Function Description This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD and HDD. 1. FORMAT NOTE : This program is only for testing a floppy disk drive. It is different from[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-61 3.24.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message. [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT TO DIAGNOSTICS MENU 2. FORMAT program (a) Selecting FORMAT displays the foll[...]

3 Tests and Diagnostics 3-62 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3. COPY program (a) When COPY is selected, the following message appears. FLOPPY DISK FORMAT & COPY : VX.XX Type select (0:2DD,3:2HD) ? (b) Selecting a media/drive type number will display a m essage similar to the one below. Insert source disk into drive[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-63 4. DUMP program (a) When DUMP is selected, the following message appears. DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX Drive type select (1:FDD, 2:HDD) ? (b) Select a drive type. If 2:HDD is selected, the display will go to step (h). If 1:FDD is selec[...]

3 Tests and Diagnostics 3-64 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) (k) The following message will appear. To finish the dum p, select 3 . Press number key (1:up,2:down,3:end) ? (l) The following message will appear. Selecting 2 returns to the FDD UTILITIES MENU. Another dump (1:Yes,2:No) ? 5. HDD ID READ program Selecting HD[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-65 3 3.25 System Configuration 3.25.1 Function Description NOTE : To display the system configuration, the write protect tab should be OFF position. If the tab is ON position, move the tab to OFF position and restart the test. Otherwise the correct information c[...]

3 Tests and Diagnostics 3-66 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.25.2 Operations Select 8 from the DIAGNOSTIC MENU and press Enter . Then, the following system configuration appears in the display. System Configuration Display : Ver X.XX [Machine Name ???] * - Processor Type = XXXXXX-XXXXXMHz Code = XX L2 Cache = XXXXXKB[...]

3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC) For the test of Intel-made wireless LAN cards , configure the test environm ent as shown below with the following equipment. ・ AP （ which can operate on Windows XP and is corresponding to access point 11a, 11b and 11g ） NOTE : Set the SSID of A[...]

3 Tests and Diagnostics 2. Open “My Computer” window and click “My Network places” on the left column. 3. Click “View network connections” on the left column. 4. The “Network Connections” window appears. Double-click “Local Area Connection”. Network Connections window 3-68 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960[...]

3 Tests and Diagnostics 5. Click “Install…” button on the “Local Area Connection Properties” window. Local Area Connection Properties window 6. Select “Protocol” on the “Select Network Component Type” window and click “Add…” button. Select Network Component Type window 7. Click “Have Disk…” button on the “Select Netw[...]

3 Tests and Diagnostics 8. When “Install From Disk” window appears, click “Browse…” and specify the created “Clx_Res” folder. Then Click “OK”. (For the test, “PACKET.INF” file is used.) Install From Disk window 9. The “Select Network Protocol” window app ears again. In the “Network Protocol”, “DDK PACKET Protocol” [...]

3 Tests and Diagnostics After the completion of REF PC setup, restart the WINDOW S. Then perform the Responder test program for Windows (W TWINSVR.EXE) in the Clx_Res folder. ・ WTWINSVR.EXE Function : Transmitting/receiving of data to/from DUT via AP OS available : Windows XP only How to start : Double-click W TWINSVR icon. How to start 1. Double[...]

3 Tests and Diagnostics 3-72 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.27 Wireless LAN Test Program on DUT PC (Intel-made) 3.27.1 Wireless LAN Test Program (Intel-made : Golan) on DUT PC This section describes how to perform the wireless LAN transm itting-receiving test (Intel- made 802.11 b/g or 802.11 a/b/g Golan). To execut[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-73 Press any key and return to the test m enu. If a defective is found during the test, NG message will appear in the display. Press any key and return to the test m enu. W hen a defective is detected in the test, following typical cause is considered. • Conne[...]

3 Tests and Diagnostics 3-74 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Subtest03 Antenna check & communication test of 11b mode This subtest execute transmitting/receiving test in 802.11b mode using the main antenna first. If a defective is not found during the test, transmitting/receiving test in 802.11b mode using the AUX [...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-75 Subtest05 Communication test of 11g mode This subtest execute transmitting/receiving test in 802.11g mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If[...]

3 Tests and Diagnostics 3-76 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.27.2 Wireless LAN T est Program (Intel-made:Kedron) on DUT PC This section describes how to perform the wireless LAN transm itting-receiving test (Intel- made 802.11 a/b/g or 802.11 a/b/g/n: kedron). To execute the wireless LAN test, use the Diagnostics dis[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-77 Press any key and return to the test m enu. W hen a defective is detected in the test, following typical cause is considered. • Connection of wireless LAN card • Using a wrong wireless LAN card (Using unspecified card) • Defective wireless LAN card Chec[...]

3 Tests and Diagnostics 3-78 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) This subtest execute transmitting/receiving test in 802.11a mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If a defective is found during the test, NG[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-79 Subtest05 Communication test of 11g mode This subtest execute transmitting/receiving test in 802.11g mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If[...]

3 Tests and Diagnostics 3-80 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program This section describes how to perform the LAN/Modem/Bluetooth/IEEE1394 test with the test program. Insert the test program disk for LAN/Mode m/Bluetooth/IEEE1394 test in FDD and turn on the power. The following m[...]

3 Tests and Diagnostics Subtest01 (i82562 + ICHx) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. The following message will appear: [LAN transmit & receive test !] COMPLETED Repeat count = 00000 Error count = 00000 LOOPBACK TEST 100Mbps Auto-negotiation TxRx Test Destination Address = xxxxxxxxxxxx Source Add[...]

3 Tests and Diagnostics Subtest02 (GbE) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. Select 2 to execute and press Enter . The following message will appear: Testing adaptor...hit <ESC> to abort. * External Loopback Test...PASSED Testing completed. * * Loopback Test Complete * * * 1000Base Auto-negotiati[...]

3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-83 3.28.2 Modem test NOTE : Modem Test is not supported for this model. For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki Seisakusyo)” for the[...]

3 Tests and Diagnostics 3.28.3 Bluetooth test Preparation ・ For the test of Bluetooth function, use the Windows program installed on the target computer (computer to be tested). A responder device (device for transm itting/receiving data) is also needed. (A mobile phone with the Bluetooth function is also available.) ・ A Bluetooth card should b[...]

3 Tests and Diagnostics 5. Select “Diagnostics” tab and click “Run”. 6. Check the “Log” to confirm the test result. PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-85 7. When the BT (Bluetooth) address of the responder device appears, the Bluetooth card and antenna connection are OK. If the BT address of the responder de[...]

3 Tests and Diagnostics 3-86 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.28.4 IEEE1394 test To execute this test, press 4 and Enter . NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test. The following menu will appear: *******************************************[...]

Tests and Diagnostics Rev B 3.30 Sound Test program Sound TEST disk cannot be used in PORTEGE M700. Therefore, please test the sound on Windows OS. 1) Play a music file. 2) click TOSHIBA-> utility -> "PC diagnostic tool." to test the sound Please check operation of speakers by one of methods. 3.31 3G Test program Therefore, please t[...]

Tests and Diagnostics 3-88 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) 3.32 BIOS SETUP 3.32.1 Function Description This program displays the current system setup inform ation as listed below: 1. Memory 2. System Date/Time 3. Password (a) User Password (b) Supervisor Password 4. HDD Password (a) HDD (b) HDD Password Mode (c) User P[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-89 (b) SATA Controller Mode 10. PCI Bus 11. Display (a) Power On Display 12. Peripheral (a) Internal Pointing Device 13. Legacy Em ulation (a) USB KB/Mouse Legacy Emulation (b) USB-FDD Legacy Emulation (c) USB Memory BIOS Support 14. PCI LAN (a) Built-in LAN 15. Secur[...]

Tests and Diagnostics 3.32.2 Accessing the SETUP Program While pressing ESC , turn on the power. Then press F1 . The following display appears. 3-90 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-91[...]

Tests and Diagnostics 3-92 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Moving Within the SETUP Menu and Changing Values 1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to m ove between items in a column. Press PGUP and PGDN to m ove between the two pages. 2. Press either the Space bar or Back Space to change [...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-93 SETUP Options The SETUP screen is divided into 14 functionally related groups. This section describes each group and its options. 1. Memory This group of options displays the computer’s mem ory. This field displays the total amount of mem ory installed and is aut[...]

Tests and Diagnostics 3-94 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) (b) HDD Password Mode This item registers HDD password and can be selected only for registering HDD password. To change HDD Password Mode when HDD password is registered, delete the registered HDD pa ssword first, and then register new password. User Only Sets [...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-95 (b) HDD Priority This option enables to select the pr iority for the Built-in HDD, Second HDD or USB. Built-in HDD → Second HDD → USB (Default) Second HDD → Built-in HDD → USB USB → Built-in HDD → Second HDD USB → Second HDD → Built-in HDD 6. Others[...]

Tests and Diagnostics This option set the Execute-Disable Bit function of CPU to the operation system. Execute-Disable Bit gives higher security function preventing the PC from the computer viruses and buffer overflow problem on unauthorized access. Available Enable the Execute-Disable Bit function. Not Available Disable the Execute-Disable Bit fun[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-97 On Battery The following settings can be changed when the Wake-up on LAN is Enabled. Enabled Wake-up on LAN function whenoperating from the battery. Disabled Wake-up on LAN function whenoperating from the battery (Default). NOTE: 1. Do not remove the AC adaptor and[...]

Tests and Diagnostics 7. Configuration (a) Device config. This option lets you set the device configuration. All Devices BIOS sets all devices. Setup by OS Initializes devices, which is needed to load an operating system. Operating system initializes other devices. (Default) NOTE: 1. When using installed OS, selecting “Setup by OS” is recommend[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-99 Battery Save Options Processing Speed This feature changes the CPU processing speed. High CPU operates at high speed. (Default in Full Power Mode) Low CPU operates at low speed. (Default in Low Power Mode) CPU Sleep Mode Use this option to enable or disable the CPU[...]

Tests and Diagnostics 3-100 [CO NFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) A u t o PCI Express devices are not used while battery operation. (Default) D i s a b l e d Disable the Power-saving function and drive with maximum performance. E n a b l e d PCI Express devices are not used. (c) Enhanced C-States This option set the power-s[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-101 10. PCI Bus This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed. PCI BUS = Serial IRQ10, IRQ11 11. Display This group of options configures the computer’s display. (a) Power On Display This [...]

Tests and Diagnostics 3-102 [CO NFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) (b) USB-FDD Legacy Emulation This option sets the Legacy support condition of the USB floppy disk drive. When a computer is FDD built-in m odel, this option is not displayed. Enabled Enables LEGACY support. (Default) USB floppy disk is available without the d[...]

Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [ CONFIDENTIAL] 3-103[...]

[CONFIDENTIAL] Chapter 4 Replacement Procedures[...]

4. Replacement Procedures 4-ii [CONFIDENTIAL ] PORTÉGÉ M700/M750 Ma intenance Ma nual (960-66 1) 4[...]

4. Replacement Procedures PORTÉGÉ M700/M750 Ma intenance Manu al (960-66 1) [CONFIDENTIAL ] 4-iii Chapter 4 Contents 4.1 Overview ................................................................................................................... 4-1 4.2 Battery pack .................................................................................[...]

4. Replacement Procedures 4-iv [CONFIDENTIAL ] PORTÉGÉ M700/M750 M aintenance M anual (960- 661) 4.28 Sensor board............................................................................................................ 4- 74 4.29 Touch pad.........................................................................................................[...]

4. Replacement Procedures PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [ CONFIDENTIAL] 4-v Figures Figure 4-1 Removing the battery pack............................................................................... 4-10 Figure 4-2 Removing the PC card ..................................................................................... 4-12 [...]

4. Replacement Procedures 4-vi [CONFIDENTIAL ] PORTÉGÉ M700/M750 M aintenance M anual (960- 661) Figure 4-31 Removing th e front panel ............................................................................... 4-54 Figure 4-32 Removing the h eat sink (with fan) ................................................................. 4-56 Figure 4-3[...]

4. Replacement Procedures PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [ CONFIDENTIAL] 4-vii[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B 4 Replacement Procedures 4.1 Overview This chapter describes the procedure for rem oving and replacing the fi eld replaceable units (FRUs) in the PC. It may not be necessary to remove all [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-2 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintena nce Manual ( 960-661) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the ins[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance Man ual (960-661) [CONFIDENTIAL] 4-3 Before You Begin Take note of the following points before starting work. Always remove the AC adapter and battery pack befor[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Disassembly Procedure Four main types of cable connector are used. • Pressure plate connector • Spring connector • Back flip connector • Normal pin connector When disconnecting a pressur[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance Man ual (960-661) [CONFIDENTIAL] 4-5 Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replace[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B NOTE : When assembling the computer, follo w the gap standard in the figure below. COVER - FACE SHEET F COVER - T-PAD BUTTON COVER - T- PAD BUTTON L2 L1 J3 LCD COVER - LCD TOP COVER MASK -[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B PORTÉGÉ M700/M750 M aintenance Man ual (960-661) [CONFIDENTIAL] 4-7 MASK – LCD COVER Tools and Equipment For your safety and the safety of the pe ople around you, it is important that [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening can damage compone nts and screws; undertightening can result in electrical shorts or other dama[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Grip Color Some screws have a colored grip area to he lp you determine the leng th of the screw. • Even numbered length screws: Brown • Odd numbered length screws: White • Special length s[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.2 Battery pack Removing the battery pack The following describes the procedure for removing the battery pack. (See Figure 4-1.) CAUTION: Take care not to short circuit the term inals when remo[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [CONFIDENTIAL ] 4-11 Installing the battery pack The following describes the procedure for inst alling the battery pack. (See Figure 4-1.) CAU[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3 PC card/Smart card/Bridge media 4.3.1 PC card Removing the PC card The following describes the procedure for rem oving the PC card. (See Figure 4-2.) CAUTION: Insert or remove the PC card in[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3.2 Smart card Removing the Smart card The following describes the procedure for rem oving the Smart card. (See Figure 4-3.) CAUTION: Insert or remove the Smart card in a ccordance with any in[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3.3 Bridge media Removing the Bridge media (SD Card/Memory Stick/xD Picture Card/ MultiMediaCard) The following describes the procedure for re m oving the Bridge media. (See Figure 4-4.) CAUTI[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.4 Tablet PC pen Removing the Tablet PC pen The following describes the procedure for rem o ving the tablet PC pen. (See Figure 4-5.) 1. Push the tablet PC pen in the tablet PC pen slot, so tha[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.5 Reserve pen case Removing the Reserve pen case The following describes the procedure for rem o ving the reserve pen case. (See Figure 4-6.) 1. Close the display and turn over the computer 2.[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.6 HDD Removing the HDD The following describes the procedure for removing the HDD. (See Figure 4-7 to 4-9.) CAUTION: Take care not to press on the top and bottom of the HDD. Pr essure may caus[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Hold the tab to raise the HDD assembly straight and pull out the HDD assembly from the connector of the HDD cable . NOTE: When removing the HDD assembly, be care ful not to tear the tab. If t[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Place the HDD assembly on a flat s urface and remove the following screws fixing the HDD holder. • M3.0 × 4.0C FLAT HEAD screw × 4 4. Separate the HDD holder and HDD . PORTÉGÉ M700/M750[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-20 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) Installing the HDD The following describes the procedure for in stalling the HDD. (See Figure 4-7 to 4-9.) CAUTION: Do not [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.7 Slim select bay module Removing the slim select bay module The following describes the procedure for removing the slim select bay module. (See Figure 4-10 and 4-11.) The explanation and figu[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev D PORTÉGÉ M700 only 4. Remove the following screws , connector cover and connector from the optical drive assembly. • M2.0 × 6.0C BIND screw × 2 5. Remove the following screw and conne[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. • M2.0 × 3.0C S-THIN HEAD screw × 1 Rev D • M2.0 × 22.0C BIND screw × 1 PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [CONFIDENTIAL ] 4-23 Figure 4-12-SATA Detaching the optical dr[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-24 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) 3. Install the connector cover and con nector to the optical drive assembly and secure them with the following screw s . ?[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.8 Memor y module (slot B) CAUTION: The power must be turned off wh en you remove the memory module. Removing the memory module with the power on risks damaging the module or the computer itsel[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Open the left and right latches and remove the memory module . Memory module Latch Latch Figure 4-14 Removing the memory module (slot B) 4-26 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance M[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [CONFIDENTIAL ] 4-27 Installing the memory module To install the memory module, make sure the computer is in boot m ode and powered off. Then [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.9 Fan hood NOTE : When repairing the PC, clean the fan hood and heat sink with a vacuum cleaner and cotton sticks, and remove dusts with tweezers. Removing the Fan hood The following describes[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [CONFIDENTIAL ] 4-29 Installing the Fan hood The following describes the procedure for installing the fan hood. (See Figure 4-14.) 1. Install [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.10 Keyboard Removing the keyboard The following describes the procedure for remo ving the keyboard. (See Figure 4-15 to 4-18.) 1. Turn the computer face up. 2. Open the display and make it fla[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 5. Lift the top edge of the keyboard while relea sing latch and turn it face down on the palm rest while releasin g the guides from the slits . Keyboa Slit Guide rd Guide Latch Figure 4-17 Remov[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 6. Re move the following screw and keyboard cover . • M2.5 × 3.0C S-THIN HEAD screw × 1 M2.5x3.0C S-THIN HEAD Keyboard cover Figure 4-18 Removing the keyboard cover 7. Disconnect the keyboar[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [CONFIDENTIAL ] 4-33 Installing the keyboard The following describes the procedure for inst alling the keyboard. (See Figure 4-15 to 4-18.) 1.[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.11 Memory module (slot A) CAUTION: The power must be turned off wh en you remove the memory module. Removing the memory module with the power on risks damaging the module or the computer itsel[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Open the left and right latches and remove the memory module . Latch Latch Memory module Figure 4-21 Removing the memory module (slot A) PORTÉGÉ M700/M750 M aintenance M anual (960-66 1) [C[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-36 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) Installing the memory module To install the memory module, make sure the computer is in boot m ode and powered off. Then pe[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.12 Wireless LAN card/Robson card Removing the Wireless LAN card/Robson card To remove the wireless LAN card/Robson card, follow the steps below. (See Figure 4-21 to 4-23.) CAUTION: Do not try [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Remove the following screws and disconnect the Robson card from the connector on the system board. • M2.0 × 4.0B S-THIN HEAD screw × 2 M2.0 × 4.0B S-THIN HEAD Robson card Figure 4-23 Rem[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Disconnect the wireless LAN antenna cables (black, white and gray) from the wireless LAN card using an ante nna coaxial cable disconnector. 4. Remove the following screws and disconnect the w[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-40 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) Installing the Wireless LAN card/Robson card To install the wireless LAN card/Robson card, follow the steps below. (See Fig[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B 4.13 3G card (3G model only) Removing the 3G card To remove the 3G card, follow the steps below. (See Figure 4-3G.) CAUTION: Do not try to remove the 3G card with the computer turned on. T[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-42 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) Installing the 3G card To install the 3G card, follow the steps below. (See Figure 4-3G) CAUTION: Be sure to switch the com[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.14 Base assembly and Cover assembly Removing the base assembly and cover assembly The following describes the procedure for rem o ving the base assembly and cover assembly. (See Figure 4-24 to[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Stand the display 90 degrees. 4. Turn the display clockwise 90 degrees and remove the following screw s . • M2.5 × 10.0B FLAT HEAD screw × 2 5. Remove the hinge rear cover . M2.5 × 10.0B[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 6. Return the display counterclockwise in th e original position, cl ose the display and turn over the computer. 7. Remove the following screws . • M2.5 × 16.0B FLAT HEAD screw × 3 (“16”[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4-46 [CONFIDENTIAL] PORTÉGÉ M700/M750 Mainte nance Manual ( 960-661) Installing the base assembly and cover assembly The following describes the procedure for instal ling the base assem bly an[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4 Replacement Procedures 4.15 Slim select bay latch Removing the Slim select bay latch The following describes the procedure for rem ovi ng the slim select bay latch. (See Figure 4- 27.) 1. Remove the slim select bay cap on the bottom while [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-48 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Installing the Slim select bay latch The following describes the procedure for instal ling the slim select bay latch (See Figure 4- 27). 1. Set the spring to the slim se[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.16 Battery lock assembly Removing the Battery lock assembly The following describes the procedure for rem o ving the battery lock asse mbly. (See Figure 4-28.) 1. Remove the battery lock assembly from the slot while pushi ng it in the dire[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.17 RTC battery CAUTION: Risk of explosion if battery is re placed by an incorrect type. Dispose of used batteries according to the laws and ordinances of your local authority. Removing the RTC battery The following describes the procedure [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-51 Installing the RTC battery The following describes the procedure for inst alling the RTC battery. (See Figure 4-29.) 1. Connect the RTC battery cable to the connector C[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.18 Bluetooth module Removing the Bluetooth module The following describes the procedure for remo ving the Bluetooth module. (See Figure 4- 30.) CAUTION: Do not try to remove the Bluetooth module with the computer turned on. You can damage [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-53 Installing the Bluetooth module The following describes the procedure for instal ling the Bluetooth module. (See Figure 4-30.) 1. Turn up the black sheet . 2. Connect t[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.19 Front panel Removing the Front panel The following describes the procedure for re m oving the front panel. (See Figure 4-31.) 1. Remove the front panel from the base assem bly while lifting the system board up slightly. Front panel Figu[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-55 4.20 Fan/Heat sink/CPU Removing the Fan/Heat sink/CPU The following describes the procedure for rem o ving the fan/heat sink/CPU. (See Figure 4-32 to 4-34.) 1. Remove th[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-56 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Figure 4-32 Removing the heat sink (with fan) M2.0x4.0B BIND Fan hood M2.0x4.0B BIND CPU hold plate Metal plate Fan cable Heat sink M2.0x4.0B BIND Cooling sheet CN8771[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-57 6. Set the flat plate under the fan so that stress is not given to the assembly while disassembling and assembling. 7. Remove the following screws and separate the fan [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 8. Unlock the CPU by rota ting counterclockwise the cam on the CPU socket by 90 degrees with a flat-blade driver. Figure 4-34 Removing the CPU 9. Remove the CPU . CAUTION: When removing the CPU, lift it up right above. Otherwise, pins of CPU[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Installing the Fan/Heat sink/CPU The following describes the procedure for inst alling the fan/heat sink/CPU. (See Figure 4-32 to 4-36.) 1. Make sure that the cam of the CPU socket is in the unlock (OPEN) position. 2. Place the CPU on the CP[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4. If there is already silicon grease on the CPU and heat sink, clean it with a cloth. Using a special applicator, apply silic on grease (DENKA GFC-F1) so that the CPU chip on the CPU is completely covered. Figure 4-36 Applying silicon greas[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.21 System board Removing the System board The following describes the procedure for re m oving the system board. (See Figure 4-37 and 4-38.) 1. Turn up the insulator and disconnect the speaker cable and microphone cable from the connector [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 3. Turn up the black sheet and peel off the acetate tape . 4. Lift up the system board and disconnect the sensor cable from the connector CN9530 on the system board. NOTE: Do not try to remove the system board w ith the sensor cable being co[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-63 Installing the system board The following describes the procedure for inst alling the system board. (See Figure 4-37 and 4-38.) 1. Set the system board to the cover ass[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definier t.Fehler! Formatvorla g e nic h Rev B 8. Turn up the insulator and connect the speaker cable and microphone cable to the connector CN6150 and CN6060 on the system board. NOTE: When installing a new system board, stick new keyboard supports on the s ystem board according to [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.22 HDD cable/Bluetooth cable Removing the HDD cable/Bluetooth cable The following describes the procedure for removing the HDD cable/Bluetooth cable. (See Figure 4-39.) 1. Peel off the insulator and disconnect the HDD cable from the connec[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.23 MDC Removing the MDC The following describes the procedure for removing the MDC. (See Figure 4-40.) 1. Remove the following screws securing the MDC. • M2.0 × 4.0B BIND screw × 2 2. Turn up the insulator . 3. Disconnect the MDC from [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-67 Installing the MDC The following describes the procedure for installing the MDC. (See Figure 4-40.) 1. Connect the MDC cable to the connector on the MDC. 2. Connect the[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Rev B 4.24 PC card slot Removing the PC card slot The following describes the procedure for re m oving the PC card slot. (See Figure 4- PCCARD.) 1. Remove the following screws securing the PC card slot. • M2.0 × 3.0C S-THIN HEAD screw × [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Rev B Installing the PC card slot The following describes the procedure for inst alling the PC card slot. (See Figure 4- PCCARD.) 1. Set the PC card slot while engaging the latch and secure it with the f ollowing screws . • M2.0 × 3.0C S-[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Rev B 4.25 Smart card slot (Smart card model only) Removing the Smart card slot The following describes the procedure for rem oving the Smart card slot. (See Figure 4- SMART.) 1. Remove the following screws securing the Smart card slo t. •[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Rev B Installing the Smart card slot The following describes the procedure for installing the Sm art card slot. (See Figure 4- SMART.) 1. Set the Smart card slot in place and connect the S mart card slot cable to the connector CN2170 on the [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.26 Battery cable holder Removing the Battery cable holder The following describes the procedure for rem o ving the battery cable holder. (See Figure 4- 41.) 2. Remove the following screw and battery cable holder from the slot. • M2.0 × [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definier t.Fehler! Formatvorla g e nic h 4.27 Pen holder assembly Removing the Pen holder assembly The following describes the procedure for re m oving the pen holder assembly. (See Figure 4- 42.) 1. Remove the pen holder assembly from the slot . PORTÉGÉ M700/M750 M aintenance M a[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.28 Sensor board Removing the Sensor board The following describes the procedure for removing the sensor board. (See Figure 4-43.) 1. Remove the sensor board from the slot. 2. Disconnect the sensor cable from the connector on the sensor boa[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.29 Touch pad Removing the Touch pad The following describes the procedure for remo ving the touch pad. (See Figure 4-44 to 4-46.) 1. Peel off the glass tapes . 2. Disconnect the relay cable from the connector on the touch pad. 3. Remove th[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4. Disconnect the touch pad cable and relay cable from the connector on the button board. 5. Turn over the touch pad assembly and peel off the button board . CAUTION: Do not reuse the removed button board. Button board Connector Cable Double[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 6. Peel off the touch pad . CAUTION: Do not reuse the removed touch pad. Touch pad Figure 4-46 Removing the touch pad (3) PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-77[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-78 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Installing the Touch pad The following describes the procedure for inst alling the touch pad. (See Figure 4-44 to 4-46.) 1. Stick a new touch pad on the palm rest cover [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.30 Speaker Removing the speaker The following describes the procedure for removing the speaker. (See Figure 4-47.) 1. Remove the speaker covers while releasing latch es . 2. Peel off the acetate tapes and take the speakers out from the spe[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-80 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Installing the speaker The following describes the procedure for installing the speaker. (See Figure 4-47.) 1. Place the speakers to the slots on both sides. 2. Install [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.31 Hinge assembly Removing the Hinge assembly The following describes the procedure for re m oving the hinge assembly. (See Figure 4-48 and 4-49.) 1. Release the cables from the guides of the cable holder. Cable Figure 4-48 Removing th e h[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definier t.Fehler! Formatvorla g e nic h Rev B 4-82 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Figure 4-49a Removing the hinge assembly (1) (3G model only) 3G Antenna Cable (Red) W -LAN Antenna Cable ( Black ) W-LAN Antenna Cable(Gray) 3G Antenna Cable (Blue)[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 2. Remove the following screws and cable holder . • M2.5 × 10.0B FLAT HEAD screw × 2 3. Open the display at the right angle to th e palm rest covers and turn the display clockwise 90 degrees and remove the hinge assembly . 4. Remove the [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-84 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Installing the Hinge assembly The following describes the procedure for inst alling the hinge assembly. (See Figure 4-48 and 4-49.) 1. Set the hinge spacer , hinge assem[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.32 LCD unit/Touch panel/Digitizer Removing the LCD unit/Touch panel/Digitizer The following describes the procedure for removing the LCD unit/touch panel/digitizer. (See Figure 4-50 to 4-54.) 1. Turn the display clockwise180 degrees and cl[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4. Remove the following screws securing the LCD assembly. • M2.0 × 4.0B S-THIN HEAD screw × 4 5. Raise the top edge of the LCD assembly on the display cover. M2.0x4.0B S-THIN HEAD M2.0x4.0B S-THIN HEAD M2.0x4.0B S-THIN HEAD M2.0x4.0B S-T[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 6. Turn up the insulator and peel off the glass tapes . 7. Disconnect the LCD cable and digitizer cable from the connectors on the back of the LCD unit. CAUTION : When removing the cables, be care ful not to damage the connectors. 8. Remove [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h CAUTION : Read the following instructions before handling the touch panel. Touch panels are made of glass having shar p edges and corners; workers must wear gloves not to cut their fi ngers or skin when handling. Touch panels are made of gla[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h The LCD mask must not touch any part of the transparent area; it will cau se unexpected input. Inside edge of the LCD mask must be between the transparent area and the operation guaranteed active area. The LCD mask must not touch film in the[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 9. Peel off the glass tape and disconnect the touch panel cable from the connector on the LCD assembly. CAUTION : When removing the cable, be ca reful not to damage the connectors. 10. Peel off the acetate tapes and separate the touch panel [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definier t.Fehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-91 CAUTION : Read the following instructions before handling the Digitizer. Do not disassemble or modify the digitiz er sensor unit; it may damage sensitive parts inside th[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h To attain maximum performance, abi de by the following precautions. a. Attach the digitizer sensor unit fla t on the bottom surface of LCD panel. b. Affix three sides of the digitizer se nsor un it to corners se curely using single-coated or[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-93 The CMOS LSIs used in the digitizer sensor unit are very sensitive to ESD (Electro-S tatic Discharge). Person handling the digitizer sensor unit shall be grounded with [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h There is a portion where the bezel is sticki ng out because of the digitizer guide. Do not press and rub the portion with bare hands or it may result cut your finger. Do not make any scratches on the B/L and TAB by the edge of the digitizer [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Do not pull up the PCB hardly wh en installing the digitizer b ecause it may result to give stress on the TAB or PCB and caus e the display function failure. Make sure that three latches fit the digitizer securely. If the latches are not loc[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Do not put any instrument on the LCD modul e because it may result to make scratch on the cell, polarization sheet or B/L and brea k the TAB and may cause the display function failure. 4-96 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Man[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Do not hold, press and rub the TAB because it may result to break the TAB and cause the display function failure. PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-97[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4-98 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maint enance Manu al (960-661 ) Make sure to put the LCD module on the flat place. If the LCD module is put on the uneven place, it may result to break the T AB, make scratch on the B/L or polariz atio[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 11. Slide out the digitiz er toward the arrow pointing while peelin g of f the digitizer of the LCD unit. (The digitizer is stuck on the LCD unit with double-sided tapes.) CAUTION : Do not reuse the removed digitizer. Digitizer Figure 4-55 R[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definier t.Fehler! Formatvorla g e nic h Installing the LCD unit /Touch panel/Digitizer The following describes the procedu re for installing the LCD unit/touch panel/digitizer. (See Figure 4-50 to 4-54.) CAUTION : When installing the LCD unit/touch panel/digitizer, be careful of th[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 1. Peel off separators of double-sided ta pes on the back of a new digitizer. 2. Slide a new digitizer into the back pocket of the LC D and fix it with the double-sided tape. NOTE: When installing a new digitizer, follow the instructions bel[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h Make sure the digitizer is inserted under the metal guides. Do not make a gap between the digitizer and LCD. Guide Guide Guide Guide 3. Set the LCD unit/digitizer on the touch panel and stick the acetate tapes in place. 4. Connect the touch [...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 7. Place the LCD assembly to the display cover and s ecure it with the following screws . • M2.0 × 4.0B S-THIN HEAD screw × 4 NOTE: For models with a digitizer and touch panel, be careful not to put the LCD cable under the metal plate of[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 8. Set the LCD mask to the display cover while securing the latches. NOTE : When setting the LCD mask, wipe th e LCD with a soft cloth and make the back of the LCD mask clean with an ionizer. NOTE: For models with a LCD/digitizer (wit hout t[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h NOTE: When replacing the LCD mask with a new one, stick a new black sheet in place. There are two types of black sheet, one type (for web camera model) masks the web camera portion, and the other (for no web camera model) does not mask the w[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.33 Switch board/Fingerprint sensor board Removing the Switch board/Fingerprint sensor board The following describes the procedure for rem o ving the switch board/fingerprint sensor board. (See Figure 4-55.) 1. Remove the following screw se[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h PORTÉGÉ M700/M750 M aintenance M anual (960- 661) [CO NFIDENTIAL] 4-107 Installing the Switch board/F ingerprint sensor board The following describes the procedure for installi ng the switch board/fingerprint sensor board. (See Figure 4-55[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h 4.34 Web camera board Removing the Web camera board The following describes the procedure for re m oving the web camera board. (See Figure 4- 56.) 1. Disconnect the web camera cable from the connector on the web camera board and remove the w[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht de finiert.Fehler! Formatvorla g e nic h 4.35 Wireless LAN antenna/Internal microphone/Web camera cable Removing the Wireless LAN antenna/Inte rnal microphone/Web camera cable Wireless LAN antennas/internal microphone/web cam era cable are included in a LCD cover assembly (hinge ass[...]

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. F ehler! Formatvorla g e nic h LCD cover assembly Hinge assembly M2.5x6.0B FLAT HEAD M2.5x6.0B FLAT HEAD Figure 4-59a Removing the wireless LAN antenna/3G antenna/Internal microphone/webcamera cable(3G model only) Installing the Wireless LAN antenna/In ternal microphone/W[...]

[CONFIDENTIAL] Appendices[...]

Appendices App-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)[...]

Appendices PORTEGE M700/M750 Maintenance Manual (960-661) [ CONFIDENTIAL] App-iii Appendix Contents Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ................................................................................................. B-1 B.1 Syste[...]

Appendices App-iv [CONFIDENTIAL] PORTEG E M700/M750 Maintenance Manual (960-661) C.16 CN4611 USB(Port4) interface connector (4-pin) ............................................... C-19 C.17 CN4612 USB(Port0) interface connector (4-pin) ............................................... C-19 C.18 CN5080 CRT interface connector (15-pin) ................[...]

Appendices PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] App-v Appendix D Keyboard Scan/Character Codes ................................................................ D-1 Appendix E Key Layout ..................................................................................................... E-1 E.1 United Kingdom (UK) Keyboard [...]

Appendices App-vi [CONFIDENTIAL] PORTEG E M700/M750 Maintenance Manual (960-661) Figures Figure B-1 System board ( FWGSY* ) layout (front) ....................................................... B-1 Figure B-2 System board ( FWGSY* ) layout (back) ....................................................... B-3 Figure B-3 SW board ( FWGSW* ) layout (fro[...]

Appendices PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] App-vii System board Table C-1 SO-DIMM connector (200-pin) ....................................................................... C-1 Table C-2 SO-DIMM connector (200-pin) ....................................................................... C-4 Table C-3 SELECT BAY interfa[...]

Appendices App-viii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) Table C-31 Media Bridge inte rface connector (42-pin) .................................................... C-26 Table C-32 SIMM CARD SLOT (12-pin) ........................................................................ C-27 SW board Table C-33 System board interface [...]

Appendix A Handling the LCD Module Appendices Appendix A P Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cover, be sure to seat it so that it [...]

Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface.[...]

Appendix A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. PORTEGE M[...]

Appendices Appendix A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual [...]

Appendix A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use packing m aterial that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These m aterials can release gas that can damage the panel’s polarization. PORTEGE M700 Mainten[...]

Appendices Appendix A Handling the LCD Module A-6 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)[...]

Appendix B Board Layout Appendices Appendix B Board Layout B.1 PORTÉGÉ M700 System board (FWGSY*) Front View Figure B-1 System board(FWGSY*) layout (front) PORTEGE M700/M750 Maintenance Manual (960-661) B-1[...]

Appendices Appendix B Board Layout B-2 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) ) Table B-1 PORTÉGÉ M700 System board(F WG SY*) connectors and ICs (front) Number Name CN1400 Memory connector CN1900 HDD I/F connector CN2110 PC CARD I/F connector CN2170 Smart Card I/F connector(not used) CN2600 Mini PCI Express I/F connector (W[...]

Appendix B Board Layout Appendices B.2 PORTÉGÉ M700 System board (FWGSY*) Back View Figure B-2 System board(F WG SY*) layout (back) PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-3[...]

Appendices Appendix B Board Layout B-4 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) ) Table B-2 PORTÉGÉ M700 System board (F WG SY*) connectors and ICs (back) Number Name CN1410 Memory connector CN1820 SELECT BAY I/F connector CN2300 Docking I/F connector CN4230 1394 I/F connector CN4610 USB (Port6) I/F connector CN4611 USB (Port[...]

Appendix B Board Layout Appendices Rev D B.3 PORTÉGÉ M750 System board (FWGNS*) Front View Figure B-3 System board(FWGNS*) layout (front) PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-5[...]

Appendices Appendix B Board Layout B-6 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) ) Table B-3 PORTÉGÉ M750 System board(F WGN S*) connectors and ICs (front) Number Name CN1400 Memory connector CN1900 HDD I/F connector CN2110 PC CARD I/F connector CN2170 Smart Card I/F connector(not used) CN2600 Mini PCI Express I/F connector (W[...]

Appendix B Board Layout Appendices B.4 PORTÉGÉ M750 System board (FWGNS*) Back View Figure B-4 System board(F WGN S*) layout (back) PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-7[...]

Appendices Appendix B Board Layout B-8 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) ) Table B-4 PORTÉGÉ M750 System board (F WGN S*) connectors and ICs (back) Number Name CN1410 Memory connector CN1910 SELECT BAY I/F connector CN2300 Docking I/F connector CN4230 1394 I/F connector CN4610 USB (Port5) I/F connector CN1970 e-SATA &a[...]

Appendix B Board Layout Appendices B.5 SW board (FWGSW*,FWGNW*) View (front) (back) Figure B-5 SW board (FWGSW *) layout (front/back) Table B-5 SW board (F WGSW *) connector (front) Number Name CN9542 System board I/F connector PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-9[...]

Appendices Appendix B Board Layout B.6 Finger Sensor board (FWGFS*,FWGNF*) View (front) (back) Figure B-6 Finger Sensor board (FWGFS *) layout (front/back) Table B-6 Finger Sensor board (F WGFS *) connector ( Front ) Number Name CN9541 System board I/F connector B-10 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) )[...]

Appendix B Board Layout Appendices B.7 Touch Pad board (FWGTP*,FWGNT*) View (front) (back) Figure B-7 Touch Pad board (F WGTP *) layout (front/back) Table B-7 Touch Pad board (F WGTP *)connector (front) Number Name CN3241 Touch PAD I/F connector CN9570 System board I/F connector PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-11[...]

Appendices Appendix B Board Layout Rev B B.8 Antenna board (FWGAN*) View (3G model only ) (front) (back) Figure B-8 Antenna board(F WGAN *) layout (front/back) Table B-8 Antenna board (F WGAN *) connector ( back ) Number Name CN2661 ANT I/F connector CN2662 3G I/F connector CN2663 WLAN I/F connector B-12 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance[...]

Appendix B Board Layout Appendices B.9 Panel Sensor board (FWGPN*,FWGNP*) View (front) (back) Figure B-9 Panel Sensor board(F WGPN *) layout (front /back ) Table B-9 Panel Sensor board (F WGPN *) connector ( back ) Number Name CN9531 System board I/F connector PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] B-13[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C- 1 Appendix C Pin Assignments System board (FWGSY ＊ ) C.1 CN1400 SO-DIMM connector (200-pin) Table C-1 SO-DIMM connector (200-pin) (1/3) Pin No. Signal Name Pin No. Signal Name 1 MRVREF-B0V 2 GND 3 GND 4 ADQ04-B1P 5 ADQ00-B1P 6 ADQ06-B1P 7 ADQ05-B1P 8[...]

Appendices Appendix C Pin Assignments C-2 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Table C-1 SO-DIMM connector (200-pin) (2/3) Pin No. Signal Name Pin No. Signal Name 61 ADQ28-B1P 62 ADQ25-B1P 63 ADQ29-B1P 64 ADQ24-B1P 65 GND 66 GND 67 ADM3-B1P 68 ADQS3-B1N 69 NC 70 ADQS3-B1P 71 GND 72 GND 73 ADQ30-B1P 74 ADQ31-B1P 75 ADQ27-B1P 76 A[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-3 Table C-1 SO-DIMM connector (200-pin) (3/3) Pin No. Signal Name Pin No. Signal Name 133 GND 134 ADQ37-B1P 135 ADQ39-B1P 136 ADQ38-B1P 137 ADQ34-B1P 138 GND 139 GND 140 ADQ41-B1P 141 ADQ45-B1P 142 ADQ43-B1P 143 ADQ44-B1P 144 GND 145 GND 146 ADQS5-B1N 1[...]

Appendices Appendix C Pin Assignments C-4 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.2 CN1410 SO-DIMM connector (200-pin) Table C-2 SO-DIMM connector (200-pin) (1/3) Pin No. Signal Name Pin No. Signal Name 1 MRVREF-B0V 2 GND 3 GND 4 BDQ01-B1P 5 BDQ04-B1P 6 BDQ05-B1P 7 BDQ00-B1P 8 GND 9 GND 10 BDM0-B1P 11 BDQS0-B1N 12 GND 13 BDQS0-B1[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-5 Table C-2 SO-DIMM connector (200-pin) (2/3) Pin No. Signal Name Pin No. Signal Name 61 BDQ24-B1P 62 BDQ29-B1P 63 BDQ25-B1P 64 BDQ28-B1P 65 GND 66 GND 67 BDM3-B1P 68 BDQS3-B1N 69 NC 70 BDQS3-B1P 71 GND 72 GND 73 BDQ30-B1P 74 BDQ27-B1P 75 BDQ31-B1P 76 B[...]

Appendices Appendix C Pin Assignments C-6 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Table C-2 SO-DIMM connector (200-pin) (3/3) Pin No. Signal Name Pin No. Signal Name 133 GND 134 BDQ34-B1P 135 BDQ35-B1P 136 BDQ32-B1P 137 BDQ33-B1P 138 GND 139 GND 140 BDQ45-B1P 141 BDQ46-B1P 142 BDQ40-B1P 143 BDQ41-B1P 144 GND 145 GND 146 BDQS5-B1N 1[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-7 C.3 CN1820 SELECT BAY interface connector (72-pin) Table C-3 SELECT BAY interface connector (72-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 GND 3 GND 4 GND 5 PLTRS0-E3N 6 GND 7 PDD07-P3P 8 PDD06-P3P 9 PDD09-P3P 10 PDD05-P3P 11 PDD10-P3P 12 GN[...]

Appendices Appendix C Pin Assignments C-8 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) 61 MBSTS1-S3N 62 MBSTS0-S3N 63 NC 64 NC 65 P3V 66 P3V 67 P3V 68 P3V 69 P3V 70 P3V 71 GND 72 P5V 1T GND 2T GND C.4 CN1900 HDD interface connector (11-pin) Table C-4 HDD interface connector (11-pin) Pin No. Signal Name Pin No. Signal Name 1 ZSATT0-P1P 2[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-9 C.5 CN2110 PC Card interface connector (70-pin) Table C-5 PC Card interface connector (70-pin)(1/2) Pin No. Signal Name Pin No. Signal Name 1 GND 2 ACAD00-PYP 3 ACAD01-PYP 4 ACAD03-PYP 5 ACAD05-PYP 6 ACAD07-PYP 7 ACCBE0-PYN 8 ACAD09-PYP 9 ACAD11-PYP 1[...]

Appendices Appendix C Pin Assignments C-10 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) 59 ACSERR-PYN 60 ACREQ-PYN 61 ACCBE3-PYN 62 ACAUDI-PYP 63 ACSTSC-PYP 64 ACAD28-PYP 65 ACAD30-PYP 66 ACAD31-PYP 67 ACCD2-P3N 68 GND 69 GND 70 GND[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-11 C.6 CN2170 Smart Card interface connector (10-pin): not used Table C-6 Smart Card interface connector (10-pin) Pin No. Signal Name Pin No. Signal Name 1 SCVCC-PYV 2 SCRST-PYN 3 SCCLK-PYD 4 SCC4-PYD 5 GND 6 NCC 7 SCIO-PYD 8 EGATE-P3N 9 SCDET-P3N 10 GN[...]

Appendices Appendix C Pin Assignments C-12 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.7 CN2300 Docking interface connector (133-pin) Table C-7 Docking interface connector (133-pin) (1/3) Pin No. Signal Name Pin No. Signal Name 1 DCOUT 2 DCOUT 3 DOCDT1-S3N 4 GND 5 BT2VD 6 BT2VD 7 PSCL-S5P 8 PSDA-S5P 9 GND 10 ZUSBDC-E3P 11 ZUSBDC-E3N [...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-13 59 GND 60 DVISCL-P5P 61 DVISDA-P5P 62 P3V 63 LINK-E3N 64 NC 65 NC 66 NC 67 ZBIDDP-EXP 68 ZBIDDN-EXN[...]

Appendices Appendix C Pin Assignments C-14 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Table C-7 Docking interface connector (133-pin) (2/3) Pin No. Signal Name Pin No. Signal Name 69 ZBIDCN-EXN 70 ZBIDCP-EXP 71 DCOUT 72 DCOUT 73 PWRSW-S3N 74 DDCON-P5P 75 NC 76 NC 77 GND 78 GND 79 DILSON-S3P 80 NC 81 GND 82 GND 83 GND 84 GND 85 NC 86 G[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-15 131 PSDA-S5P 132 GND 133 DOCDT2-S3N[...]

Appendices Appendix C Pin Assignments C-16 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Table C-7 Docking interface connector (133-pin) (3/3) Pin No. Signal Name Pin No. Signal Name 1T GND 2T GND 3T GND 4T GND 5T GND 6T GND 7T GND 8T GND 9T GND 10T GND 11T GND 12T GND 13T GND 14T GND 15T GND 16T GND 17T GND 18T GND A1 GND A2 DSKDC A3 GN[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-17 C.8 CN2600 Mini PCI Express interface connector (52-pin) Table C-8 Mini PCI Express interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name 1 PEWAKE-E3N 2 WLAN-E3V 3 WCHDA2-P3P 4 GND 5 WCHCL2-P3P 6 WLAN-P1V 7 MPEXRQ-P3N 8 WIMPWR-E3V 9 GN[...]

Appendices Appendix C Pin Assignments C-18 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.9 CN2610 Mini PCI Express interface connector (52-pin) Table C-9 Mini PCI Express interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name 1 NC 2 3G-E3V 3 NC 4 GND 5 NC 6 1RS-P1V 7 ROBXRQ-P3N 8 UIMPWR-E3V 9 GND 10 UIMDAT-E3P 11 XPEROB-P[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-19 C.10 CN3010 MDC interface connector (12-pin) Table C-10 MDC interface connector (12-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 NC 3 AZSDO1-P3P 4 NC 5 GND 6 E3V 7 AZSYC1-P3P 8 GND 9 ASDI1-E3P 10 GND 11 AZRST1-E3N 12 XAZBC1-P3P 1T GND 2T GND [...]

Appendices Appendix C Pin Assignments C-20 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.11 CN3230 Keyboard interface connector (34-pin) Table C-11 keyboard interface connector (34-pin) Pin No. Signal Name Pin No. Signal Name 1 NC 2 NC 3 NC 4 NC 5 NC 6 NC 7 KBSC15-S3N 8 KBSC14-S3N 9 KBRT07-S3N 10 KBRT06-S3N 11 KBSC13-S3N 12 KBSC12-S3N [...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-21 C.13 CN4230 1394 interface connector (4-pin) Table C-13 1394 interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 ZTPB0-P3N 2 ZTPB0-P3P 3 ZTPA0-P3N 4 ZTPA0-P3P 1T GND 2T GND 3T GND 4T GND C.14 CN4440 Bluetooth interface connector (10[...]

Appendices Appendix C Pin Assignments C-22 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.15 CN4610 USB (Port6) interface connector (4-pin) Table C-15 USB (Port6) interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 USB1PS-E5V 2 ZUSBP6-E3N 3 ZUSBP6-E3P 4 GND 1T GND 2T GND 3T GND C.16 CN4611 USB (Port4) interface connect[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-23 C.18 CN5080 CRT interface connector (15-pin) Table C-18 CRT interface connector (15-pin) Pin No. Signal Name Pin No. Signal Name 1 MRED-PXP 2 MGREEN-PXP 3 MBLUE-PXP 4 NC 5 GND 6 GND 7 GND 8 GND 9 P5V 10 GND 11 NC 12 CRTSDA-P5P 13 MHSYNC-P3P 14 MVSYNC[...]

Appendices Appendix C Pin Assignments C-24 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.19 CN5601 LCD interface connector (34-pin) Table C-19 LCD interface connector (34-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 GND 3 GND 4 GND 5 NC 6 PNL-P2V 7 PNL-P2V 8 PNL-P2V 9 PNL-P2V 10 NC 11 P3V 12 TSCL-P3P 13 TSDA-P3P 14 GND 15 ZTXDA[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-25 C.20 CN6060 Int MIC connector (2-pin) Table C-20 Int MIC connector (2-pin) Pin No. Signal Name Pin No. Signal Name 1 IMICIN-PXP 2 GND C.21 CN6150 Speaker connector (4-pin) Table C-21 Speaker connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1[...]

Appendices Appendix C Pin Assignments C-26 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.24 CN9300 RTC battery connector (3-pin) Table C-17 RTC battery connector (3-pin) Pin No. Signal Name Pin No. Signal Name 1 ZS_PWCHKF 2 NC 3 GND 1T GND 2T GND C.25 CN9530 FWGPN* board interface connector (4-pin) Table C-25 FWGPN* board interface con[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-27 C.26 CN9540 FWGFS* board interface connector (41-pin) Table C-26 FWGFS* board interface connector (41-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 GND 3 E3V 4 FGSPON-S3N 5 GND 6 ZUSBFS-E3N 7 GND 8 ZUSBFS-E3P 9 GND 10 GND 11 GND 12 GPBTNA-S3N [...]

Appendices Appendix C Pin Assignments C-28 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) 5 ZMDI2P-EYP 6 ZMDI2N-EYN 7 ZMDI3P-EYP 8 ZMDI3N-EYN[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-29 C.28 J6070 Ext MIC connector (6-pin) Table C-28 EXT MIC connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 EMICIN-PXP 3 EMICB-P2V 4 GND 5 DETCTA-P4N 6 EMICB-P2V C.29 J6310 HP JACK (6-pin) Table C-29 HP JACK (6-pin) Pin No. Signal Name [...]

Appendices Appendix C Pin Assignments C-30 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) C.31 IS2140 Media Bridge interface connector (42-pin) Table C-31 Media Bridge interface connector (42-pin) Pin No. Signal Name Pin No. Signal Name 1 MSDAT2-P3P 2 MSDAQT3-P3P 3 MSBS-P3P 4 GND 5 GND 6 FM-P3V 7 MSCLK-P3P 8 MSDAT3-P3P 9 MSCD-P3N 10 MSDAT[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-31 C.32 IS2630 SIMM CARD SLOT (12-pin) : not used Table C-32 SIMM CARD SLOT (12-pin) Pin No. Signal Name Pin No. Signal Name 1 UIPWRL-E3V 2 UIRSTL-E3P 3 UICLKL-E3P 4 NC 5 UIML-GND 6 NC 7 UIDATL-E3P 8 NC 9 NC 10 NC 11 3GSLCH-E2N 12 GND 1T GND 2T GND[...]

Appendices Appendix C Pin Assignments C-32 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) SW board (FWGSW*) C.33 CN9542 Sy stem board interface connector (15-pin) Table C-33 System board interface connector (15-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 GPBTNA-S3N 3 GPBTNB-S3N 4 PWRW-S3N 5 GND 6 KBRT00-S3N 7 KBRT01-S3N 8 KBRT02-[...]

Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-33 Finger Sensor board (FWGFS*) C.34 CN9541 Sy stem board interface connector (6-pin) Table C-34 System board interface connector (6-pin) Pin No. Signal Name Pin No. Signal Name 1 E3V 2 FGSPON-S3N 3 GND 4 ZUSBFS-E3N 5 ZUSBFS-E3P 6 GND[...]

Appendices Appendix C Pin Assignments C-34 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Touch Pad board (FWGTP*) C.35 CN3241 Touch PAD interface connector (12-pin) Table C-35 Touch PAD interface connector (12-pin) Pin No. Signal Name Pin No. Signal Name 1 P5V 2 P5V 3 IPDCLK-P5P 4 IPDCLK-P5P 5 GND 6 GND 7 NC 8 NC 9 NC 10 SWL 11 SWR 12 NC[...]

Appendix C Pin Assignments Appendices Rev B Antenna board (FWGAN*): (3G model only) C.37 CN2661 ANT interface connector (3-pin) Table C-37 ANT interface connector (3-pin) Pin No. Signal Name Pin No. Signal Name 1 (FL2660-2) 2 GND 3 GND C.38 CN2662 3G interface connector (3-pin) Table C-38 3G interface connector (3-pin) Pin No. Signal Name Pin No. S[...]

Appendices Appendix C Pin Assignments C-36 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661) Panel Sensor board (FWGPN*) C.40 CN9531 Sy stem board interface connector (4-pin) Table C-40 System board interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name 1 GND 2 TPLOFR-S3N 3 PNLOFR-S3N 4 S3V[...]

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE M700 Maintenance Manual (960-6 61 ) [CONFIDENTIAL] D-1 Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 #[...]

Appendices Appendix D Keyboard Scan/Character Codes D-2 [CONFIDENTIAL]PORTEGE M700 Maintenance Manual (960-6 61 ) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 29 ¦ 2B AB 5D F0 5D *2 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B[...]

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE M700 Maintenance Manual (960-6 61 ) [CONFIDENTIAL] D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0[...]

Appendices Appendix D Keyboard Scan/Character Codes D-4 [CONFIDENTIAL]PORTEGE M700 Maintenance Manual (960-6 61 ) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Keytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc Refer to table 2-25 126 Pause Refer to table 2-25 202 Fn *5 203[...]

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE M700 Maintenance Manual (960-6 61 ) [CONFIDENTIAL] D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E[...]

Appendices Appendix D Keyboard Scan/Character Codes D-6 [CONFIDENTIAL]PORTEGE M700 Maintenance Manual (960-6 61 ) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4[...]

Appendix D Keyboard Scan/Character Codes Appendices PORTEGE M700 Maintenance Manual (960-6 61 ) [CONFIDENTIAL] D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 [...]

Appendices Appendix D Keyboard Scan/Character Codes D-8 [CONFIDENTIAL]PORTEGE M700 Maintenance Manual (960-6 61 ) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co mmo n * E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

Appendix E Key Layout Appendices 4 Appendix E Key Layout E.1 United Kingdom (UK) Keyboard Figure E-1 UK keyboard E.2 United States (US) Keyboard Figure E-2 US keyboard PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] E-1[...]

Appendices Appendix E Key Layout E.3 Canadian French Keyboard Figure E-4 Canadian French keyboard E-2 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)[...]

Appendix F Wiring diagrams Appendices F Appendix F Wiring diagrams F.1 RGB Monitor Loopback Connector Figure F-1 RGB Monitor Loopback Connector F.2 LAN Loopback Connector Figure F-2 LAN Loopback Connector PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] F-1[...]

Appendices Appendix F Wiring diagrams F-2 [CONFID ENTIAL] PORTEGE M700 Maintenance Manual (960-661)[...]

Appendix G BIOS rewrite procedures Appendices 4 Appendix G BIOS rewrite procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting disk for the com puter that has renewed BIOS data. Rewriting the BIOS 1. Set the system to[...]

Appendices Appendix G BIOS rewrite procedures G-2 [CONFIDE NTIAL] PORTEGE M700 Maintenance Manual (960-661)[...]

Appendix H EC/KBC rewrite procedures Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] H-1 4 Appendix H EC/KBC rewrite procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC, you need the following tool:  EC/KBC rewriting disk for the computer Re[...]

Appendices Appendix H EC/KBC rewrite procedures H-2 [CONFIDE NTIAL] PORTEGE M700 Maintenance Manual (960-661)[...]

Appendix I Reliability Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] I-1 4 Appendix I Reliability The following table shows MTBF (Mean Time Between Failures). Table I-1 MTBF Time (hours) MTBF 6,272.78* * In the case of the model corresponding to AMT and Robson[...]

Appendices Appendix I Reliability I-2 [ CONFIDENTIAL] PORTEGE M700 Maintenance Manual ( 960-661)[...]