Toshiba TLP380 manual

1 Before use CONTENTS O WNER’S MANU AL 3LCD DATA PROJECTOR TLP380 TLP381 ( WITH DOCUMENT IMAGING CAMERA ) MENU TLP380[...]

2 Before use CONTENTS SAFETY PRECAUTIONS The lightning flash with arro whead symbol, within an equilateral triangle, is intended to aler t the user to the presence of uninsulated “ dangerous v oltage ” within the product ’ s enclosure that ma y be of sufficient magnitude to constitute a risk of electric shock to persons . The e xclamation poi[...]

3 Before use CONTENTS IMPORT ANT PRECAUTIONS In the spaces provided belo w , record the Model and Ser ial No . located at the bottom of y our LCD projector . Model No . Serial No . Retain this inf or mation for future ref erence. Save Original Packing Materials The original shipping car ton and packing materials will come in handy if you e v er hav[...]

4 Before use CONTENTS IMPORT ANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL W ARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT . RET AIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manuf actured to assure personal safety . Improper use can result in electric shock or fire hazar[...]

5 Before use CONTENTS 5. Heat The product should be situated aw ay from heat sources such as radiators, heat registers, sto v es, or other products (including amplifiers) that produce heat. IMPORT ANT SAFETY INSTRUCTIONS (continued) 6. W ater and Moisture Do not use this product near water – for e xample, near a bath tub , w ash bowl, kitchen sin[...]

6 Before use CONTENTS 1 1. Object and Liquid Entry Ne v er push objects of any kind into this product through openings as they ma y touch dangerous v oltage points or shor t- out par ts that could result in a fire or electric shock. Ne ver spill liquid of an y kind on the product. 12. Do not place the product vertically Do not use the product in th[...]

7 Before use CONTENTS 17. If glass components, including lens and lamp, should break, contact your dealer for repair service. This product incor porates glass components, including a lens and a lamp . If such par ts should break, please handle with care to av oid injur y and contact your dealer f or repair ser vice. The broken pieces of glass ma y [...]

8 Before use CONTENTS IMPORT ANT SAFETY INSTRUCTIONS (continued) 21. Do not get your hands between the camera arm and the main unit when setting the camera arm back in its original position. T o av oid injur y , be careful not to get y our hands caught when setting the camera ar m bac k in its original position. F amilies with children should be pa[...]

9 Before use CONTENTS Power supply cord selection Plug configuration Plug type EURO UK Line v oltage 220 – 240V 220 – 240V Use a 5A fuse which is approv ed by AST A or BSI to BSI362. Alwa ys replace the fuse cov er after changing the fuse. If y our line voltage is 220 to 240V , use one of the f ollowing types of cable . Plug configuration Plug [...]

10 Before use CONTENTS Contents Before use SAFETY PRECAUTIONS ...................................................... 2 IMPORT ANT PRECA UTIONS ............................................... 3 IMPORT ANT SAFETY INSTRUCTIONS ............................... 4 Power supply cord selection ............................................... 9 Contents .....[...]

11 Before use CONTENTS Names of each part on the main unit Continued 12 16 Control panel Infrared remote sensor Air e xhaust Lens cov er Lens F ocusing ring 31 Zooming le v er 31 Air intake Air intake F oot adjuster 20 F oot adjuster release button 20 A C IN sock et 19 Speaker Carr ying handle Open to carr y the projector . Anti-theft lock hole Fro[...]

12 Before use CONTENTS Names of each part on the main unit (continued) K E Y S T O N E A U T O S E T E X I T ON / ST ANDBY V OL / ADJ E N T E R M E N U I N P U T F A N T E M P L A M P O N TEMP indicator KEYST ONE button T o correct the ke ystone distor tion of the picture. FA N indicator LAMP indicator ON indicator INPUT button ENTER button Selecti[...]

13 Before use CONTENTS USB COMPUTER IN 1 COMPUTER IN 2 S-VIDEO VIDEO VIDEO IN R - AUDIO - L AUDIO IN ( Y/P B /P R ) MONITOR OUT CONTROL 26 73 CONTROL connector (RS-232C connector) T o connect a computer to control the projector . (Remove the co ver to use the connector .) 42 USB connector T o connect to a USB connector of a computer when using the [...]

14 Before use CONTENTS Names of each part on the remote control MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 30 35 38 40 37 44 T o displa y the menu screen and/or select the operation on the menu screen. Use the selection buttons and EXIT button to enlarge the image. INPUT button T o select the[...]

15 Before use CONTENTS Loading batteries Notes Using batteries incorrectly can cause them to leak or b urst. Strictly obser ve the f ollowing. • Install the batteries with their + and – ends facing correctly . • Do not charge, heat, disassemble, or short the batteries or throw them into a fire. • Do not leave any exhausted batteries in the [...]

16 Before use CONTENTS Remote control operation P oint the remote control at the infrared remote sensor and press a b utton. Notes • The remote control ma y not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the proje ctor ’ s remote sensor . • Operate the remote control from a position where the re[...]

17 Installation and connections CONTENTS Floor-mounted projector placement Floor-mounted front projection Viewing a picture projected on the front of the screen from a floor installation. Floor-mounted rear projection Viewing a picture projected through the bac k of the screen from a floor installation. View er T ranslucent screen View er There are[...]

18 Installation and connections CONTENTS Place the projector on a steady , level surface such as a table. T o obtain proper screen projection, place the projector so that the light beam hits the screen squarely . Floor-mounted projector placement (continued) T op view Screen Screen a 90 ° Side view 90 ° Screen a : Distance between the lens and th[...]

19 Installation and connections CONTENTS Connect the power cord. • Inser t one end into the A C IN sock et on the projector . • Insert the other end into a wall outlet. Notes • When the projector is mov ed from a cold location to a warm location, or when the ambient temperature in the projection room has r isen suddenly , moisture ma y conden[...]

20 Installation and connections CONTENTS Projector placement angle adjustment F oot adjuster release button F oot adjuster The tilt of the projector can be adjusted using the f oot adjuster . Lift the front of the projector until the desired tilt angle is obtained and hold down the foot adjuster release button. The foot adjuster will extend. Releas[...]

21 Installation and connections CONTENTS Ceiling-mounted front projection Viewing a picture projected on the front of the screen from a ceiling installation. Ceiling-mounted rear projection Viewing a picture projected through the bac k of the screen from a ceiling installation. P erf or m the “ Projection mode ” setting on the menu screen for t[...]

22 Installation and connections CONTENTS Notes • The projector cannot be connected to a computer without an analog RGB connector . For details , refer to the computer manual. • Y ou may not be ab le to connect some computers to the projector . F or details, consult the dealer . • When connecting to a Macintosh computer , use the supplied Mac [...]

23 Installation and connections CONTENTS Connecting a computer (COMPUTER IN 2 connector) Notes (Please also read “ Notes ” on page 22.) • DVI digital cable needs to be purchased separately when you input a digital RGB signal. • Although infrequent, noise might be generated on the screen depending on the types of computer and connection cab [...]

24 Installation and connections CONTENTS Connecting video equipment Note The S-VIDEO connector and VIDEO jack can be used independently , but the audio input jacks are used as both the S-VIDEO and VIDEO input. Y ou can project the picture from video equipment by using VIDEO IN connectors. Check that the po wer supplies f or the projector and f or t[...]

25 Installation and connections CONTENTS Connecting video equipment (continued) Y ou can project the picture from video equipment with component video output jack. Check that the po wer supplies f or the projector and f or the video equipment are off before connecting the cab les. USB COMPUTER IN 1 COMPUTER IN 2 S-VIDEO VIDEO VIDEO IN R - AUDIO - L[...]

26 Installation and connections CONTENTS Projector operation control by a computer USB COMPUTER IN 1 COMPUTER IN 2 S-VIDEO VIDEO VIDEO IN R - AUDIO - L AUDIO IN ( Y/P B /P R ) MONITOR OUT CONTROL Computer Remov e the cover to use the CONTR OL connector . T o RS-232C por t Control cable (supplied) T o CONTROL connector Be sure to connect in the prop[...]

27 Installation and connections CONTENTS How to use the output connector USB COMPUTER IN 1 COMPUTER IN 2 S-VIDEO VIDEO VIDEO IN R - AUDIO - L AUDIO IN ( Y/P B /P R ) MONITOR OUT CONTROL T o MONIT OR OUT connector Be sure to connect in the proper direction. Computer monitor , etc. Y ou can output video signals to a computer monitor , etc. Check that[...]

28 Operations CONTENTS Preparation 1 Install and connect the projector properly . 2 T ak e off the lens cover . Press ON/ST ANDBY . The projector tur ns on and the ON, LAMP and F AN indicators light in green. (The LAMP indicator blinks while the lamp is w ar ming up .) The lamp lights and the star t up display appears . CAUTION – Do not look into[...]

29 Operations CONTENTS Projection on the screen (continued) Press ENTER to confirm. Press EXIT to return to step 2 if you want to re-select a language. 3 Continued MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 2 2,3 2 2,3 K E Y S T O N E A U T O S E T E X I T ON / ST ANDBY VOL / ADJ E N T E R M [...]

30 Operations CONTENTS Select the input source by pressing INPUT repeatedly . At shipping from f actor y , “ Analog RGB(1) ” connected to COMPUTER IN 1 connector or “ Video ” connected to VIDEO Jac k can be selected. (Y ou can select “ Camera ” when using the model with a document imaging camera.) The icon and the name of the selected i[...]

31 Operations CONTENTS Projection on the screen (continued) 6 7 Notes (Signal sent from the computer) • If you project an image from a computer with an LCD screen while monitoring the image on the computer , the image may not be projected properly , depending on the computer model. In this case, turn off the computer displa y . For details on con[...]

32 Operations CONTENTS Notes • T o change the projecting angle , adjust the f oot adjuster. 20 • If the screen image suff ers ke ystone distor tion, press the KEYSTONE button to adjust the distortion. 35 • Due to lamp characteristics, flic kers ma y occasionally occur in a picture. This is not malfunction of the unit. • The lamp may rarely [...]

33 Operations CONTENTS T urning the power off Press ON/ST ANDBY after using the projector . An instruction message for turning the power off appears on the screen and disappears after a while. When the message disappears, oper ation becomes invalid. Press ON/ST ANDBY again. Cooling star ts. Once cooling is completed, the LAMP and F AN indicators tu[...]

34 Operations CONTENTS Notes • Automatic adjustment may not be performed properly for signals other than those computers ’ signals with which the projector is compatible . • The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 47 . * Sampling frequency Analog RGB signals i[...]

35 Operations CONTENTS Correcting the keystone distortion A picture ma y be expanded on the upper side if projected upw ard from the projector lifted up b y the f oot adjuster . The projector can correct this keystone distortion. MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 1 3 2 1 2 K E Y S T [...]

36 Operations CONTENTS 4,5 6 MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 6 4,5 K E Y S T O N E A U T O S E T E X I T ON / ST ANDBY VOL / ADJ E N T E R M E N U I N P U T F A N T E M P L A M P O N Remote control Control panel (Main unit side) Correcting the keystone distortion (continued) 4 If t[...]

37 Operations CONTENTS Cutting off the picture and sound temporarily The image and sound of this projector can be turned off if you wish to temporarily project the image from another projector or an OHP , etc., onto the screen. Note The mute mode is cancelled if another operation is perf ormed dur ing the mute mode. MENU ON / INPUT ENTER CT-90113 K[...]

38 Operations CONTENTS Freezing the picture Y ou can freeze the image being projected. Use this function to stop moving images from a video recorder during presentations. Notes • The frozen image can be enlarged with the RESIZE b uttons. The freeze mode is cancelled if any operation other than RESIZE is performed. • The freeze mode cannot be se[...]

39 Operations CONTENTS Y ou can enlarge (resize) the picture siz e projected. Enlarging the picture size Press RESIZE ( ). The enlargement ratio increases each time the RESIZE ( ) button is pressed. The enlargement ratio can be increased continuously b y keeping the button pressed in. T o reduce the enlargement ratio , press the RESIZE ( ) button. [...]

40 Operations CONTENTS Press PIP . A sub-picture is displa yed. Press the PIP button again to turn off the sub-picture. Video or S-video images can be displa yed as small images within the computer ’ s image. (Ref erred to as “ sub-pictures ” in this manual.) Notes • The PIP function cannot be used when a source other than an RGB input sour[...]

41 Operations CONTENTS CALL Notes • The inf ormation displayed is not refreshed e ven if it changes . T o refresh the inf ormation, tur n off the inf ormation display , then turn it back on. • The inf ormation display turns off if any other operation is perf ormed. • The “ Lamp time ” shows an appro ximate time f or lamp replacement. (It [...]

42 Operations CONTENTS Operating a computer by the remote control (optional) Notes • Ask your dealer about the optional remote control. • This function is av ailable with Windows98/98SE, Windows Me , Windows2000, Windows XP and Mac OS9 computers equipped with a USB por t as standard. • When connecting to the computer ’ s USB por t for the f[...]

43 CONTENTS Adjustments & Settings Operating the menu screen Continued K E Y S T O N E A U T O S E T E X I T ON / STANDBY VOL / ADJ E N T E R M E N U I N P U T F A N T E M P L A M P O N V OL/ADJ Selection MENU ENTER EXIT Control panel (Main unit side) Remote control FULL Item Next Quit Adjust the image brightness. Select the image with its brig[...]

44 CONTENTS Adjustments & Settings Operating the menu screen (continued) Analog RGB GUIDE Item Execute Quit Picture Contrast -12- -12- Bright Full Full Thru Brightness Picture mode Screen size Reset EXIT ENTER MENU Page Adjust Kind (page) of FULL MENU Items Button operation guide The current input source Adjustment display bar Choices End Selec[...]

45 CONTENTS Adjustments & Settings GUIDE MENU adjustments and settings Adjust the image brightness. Contrast Brightness Adjust the contrast of the picture. Adjust the brightness of the picture. ADJ . ADJ . Adjust the image flick er. Phase Adjust the flick er of the picture. (Sampling clock phase adjustment) ADJ . Select the image with its brigh[...]

46 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Picture Contrast Brightness Adjust the contrast of the picture. Adjust the brightness of the picture. ADJ . ADJ . Shar pness Adjust the shar pness of the picture. (In Y/P B /P R input mode, sharpness is a setting item.) ADJ . Picture mode Bright The picture is set with its [...]

47 CONTENTS Adjustments & Settings FULL MENU adjustments - Position H-position V -position Adjust the horizontal displa y position of the picture. Adjust the vertical display position of the picture . ADJ . ADJ . Phase Adjust the flick er of the picture. (Sampling clock phase adjustment) ADJ . F requency Adjust the sampling frequency of the inp[...]

48 CONTENTS Adjustments & Settings FULL MENU adjustments - Color Color Tint Adjust the color depth of the picture. Adjust the tint of the picture. (Not adjustab le at P AL, SECAM, P AL-N,P AL-M and P AL60) ADJ . ADJ . R-le vel Adjust the red le vel of the picture . ADJ . G-le vel Adjust the green lev el of the picture. ADJ . B-le vel Adjust the[...]

49 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Audio V olume Adjust the sound v olume emitted from the speaker . ADJ . Speaker output On The sound is emitted from the speaker . SET Off No sound is emitted from the speaker . SET Reset Return the adjustments and settings of FULL MENU [Audio] to the f actory default v alue[...]

50 CONTENTS Adjustments & Settings FULL MENU adjustments and settings - Display V -k eystone Adjust the keystone distortion caused by changing the vertical installation angle. ADJ . Language English Menus and messages are displa yed in English. SET Fr a n ç ais Menus and messages are displa yed in F rench. SET Icon On Off Reset Return the adju[...]

51 CONTENTS Adjustments & Settings FULL MENU settings - Default setting Reset Return the settings of FULL MENU [Default setting] to the f actory default v alues. EXEC . Projection mode Standard The projector is set to the floor-mounted front projection mode. SET Rear The projector is set to the floor-mounted rear projection mode. SET Ceiling Th[...]

52 CONTENTS Adjustments & Settings FULL MENU settings - Reset Reset all Return the adjustments and settings of all menus to the factory default setting. EXEC . Horizontal ref erence value reset The horizontal ref erence value f or "Auto . V -ke ystone" is calibrated automatically . EXEC . • Y ou can retur n the adjusting and setting[...]

53 CONTENTS Adjustments & Settings PIP menu setting Reset Return the settings of PIP MENU to the factory default setting. EXEC . Select the signal source f or PIP sub-picture. Set the PIP sub-picture size . Source : Video input is selected as signal source. SET Video : S-Video input is selected as signal source. SET S-Video Size : The PIP sub-p[...]

54 CONTENTS Document imaging camera Part names (of the document imaging camera model) CAUTION When using the camera, be careful not to pinch your hand or fingers into the arm. On the document imaging camera model, y ou can project pictures using the document imaging camera. The document imaging camera can directly project an y materials (documents,[...]

55 CONTENTS Document imaging camera Notes • Never give shocks or impacts to the camera or arm as this may cause malfunction. • While raising up or turning the ar m, the arm moves describing an arc, be careful not to hit y our face or y our body . • The figures abov e are procedures of putting mater ials on the projector . When the stability o[...]

56 CONTENTS Document imaging camera Picture projection with the document imaging camera OVERLA Y CAMERA ARM LIGHT LOCK W.B ALANCE CAMERA GAIN 1 CAUTION Do not look into the ar m light while it is lit. Preparation 1 Project a picture on the screen as e xplained in the step “ Projection on the screen ” . 28 Press ARM LIGHT . The light tur ns on. [...]

57 CONTENTS Document imaging camera Press CAMERA to select the camera input mode. • Pressing CAMERA again will return the input selection to the pre vious mode. • Y ou can also select it b y pressing INPUT on the remote control or on the main unit. Set the input source on the men u screen when selecting by the INPUT button. 30 • The CAMERA bu[...]

58 CONTENTS Document imaging camera Press CAMERA GAIN (+/-) to improve view of a camera subject which is too dark or vivid. 6 Notes • Y ou can adjust the “ Sharpness ” of the camera image on the menu screen. 46 • If the image flick ers due to a fluorescent light in the room, either tur n off the fluorescent light or set the “ Shutter ” [...]

59 CONTENTS Document imaging camera K E Y S T O N E A U T O S E T E X I T ON / ST ANDBY VOL / ADJ E N T E R M E N U I N P U T F A N T E M P L A M P O N 2 3 5 OVERLA Y CAMERA ARM LIGHT LOCK W.B ALANCE CAMERA GAIN MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY 2 Y ou can draw figures or write with [...]

60 CONTENTS Document imaging camera This projector ’ s camera is alwa ys being adjusted automatically f or projected color balance; how e v er , the balance can shift aw a y from optimum due to the color scheme of the document. Should this occur , the white balance can be set to a fix ed condition by using the following procedure. 1 Project a whi[...]

61 CONTENTS Document imaging camera With the document camera operating, fully cover the camera lens with a piece of black paper or cloth. 1 Correcting illuminated defects Note Do not press ARM LIGHT and EXIT buttons simultaneously if the camera lens is not cov ered. Doing so will not only erase the white spot correction data already set but also re[...]

62 Maintenance CONTENTS If there is some prob lem inside the projector , the indicators light up or b link. T rouble indications Indicators Or (Lit in red) (Off) ON LAMP TEMP FA N (Lit in red) (Lit in red) ON LAMP TEMP FA N (Flashing in orange) ON LAMP TEMP FA N (Lit in red) ON LAMP TEMP FA N (Lit in red) Or (Lit or flashing in red) (Lit or flashin[...]

63 Maintenance CONTENTS Air filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carr y out the maintenance such as cleaning. The filter inside the air filter cov er is the par t to shut out dusts or dregs. Do not use the projector with the filter taken off . W e recommend you clean the air filter frequently . [...]

64 Maintenance CONTENTS Air filter cleaning (continued) Assemble the air filter . Place the air filter in the air filter cov er , then inser t the f our tabs on the filter frame into the holes in the air filter cov er . Mount the air filter cover . Inser t the top of the air filter cov er into the projector first, then press on the bottom side to i[...]

65 Maintenance CONTENTS Cleaning the lens Use a blo wer or a lens cleaner to clean the lens. Ne ver rub or tap the lens with a hard object as the lens surf ace is fragile . Lens and main unit cleaning Cleaning the main unit • Pull out the power cord bef ore cleaning. • Use a soft cloth to wipe off stains from the surf ace. • T o remov e diffi[...]

66 Maintenance CONTENTS Lamp replacement The lamp will e ventually begin to project dark or dull pictures and finally will not light up . (Lamp ’ s lif e depends on operating conditions.) In such a case, replace the lamp with new one. CAUTION • If you use the projector mounted on the ceiling, ask the dealer to carr y out the maintenance such as[...]

67 Maintenance CONTENTS Notes • When the CALL button is pressed, the “Lamp time” (the approximate amount of time the lamp has been used) will be displa yed. 41 • The lamp should be replaced if the total working time e xceeds about 1,000 hours. When the “ Lamp time ” is displa yed as 1000 hours, the icon appears. It will disappear when y[...]

68 Others CONTENTS Before calling service personal Symptom The power does not come on. The power turns off while using the projector . No image appears. No sound is heard. Desired input source cannot be selected by the INPUT button. Analog RGB(1) input or Y/P B / P R input colors are not right. Analog RGB(2) input image does not appear . Digital RG[...]

69 Others CONTENTS Symptom The color is faint. The tint is not good. The remote control does not work . Mouse function cannot be used from the optional remote control unit. Document camera image is blurry . Document camera image flick ers. Document camera image mov ement is awkw ard. Horizontal stripes appear when document projected with the docume[...]

70 Others CONTENTS Mini D-sub 15pin connector Pin No . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description T .M.D .S. data 2 - T .M.D .S. data 2 + T .M.D .S. data 2/4 shield T .M.D .S. data 4 - T .M.D .S. data 4 + DDC clock DDC data Analog v er tical sync signal T .M.D .S. data 1 - T .M.D .S. data 1 + T .M.D .S. data 1/3 shield T .M.D .S. data 3 - T .M[...]

71 Others CONTENTS TEXT70 640 x 350 50 640 14 96 800 31.469 70.086 25.175 59 350 38 2 449 TEXT70 640 x 400 50 640 14 96 800 31.469 70.086 25.175 34 400 13 2 449 TEXT85 640 x 350 96 640 32 64 832 37.861 85.080 31.500 60 350 32 3 445 TEXT85 640 x 400 96 640 32 64 832 37.861 85.080 31.500 41 400 1 3 445 NEC PC98 24k 640 x 400 85 640 59 64 848 24.820 5[...]

72 Others CONTENTS Applicable signal (continued) Timing char t (Continued) *SXGA1152x864 75Hz 1152 x 864 256 1152 64 128 1600 67.500 75.000 108.000 32 864 1 3 900 *SXGA1280x960 60Hz 1280 x 960 312 1280 96 112 1800 60.000 60.000 108.000 36 960 1 3 1000 *SXGA1280x960 85Hz 1280 x 960 224 1280 64 160 1728 85.938 85.002 148.500 47 960 1 3 1011 *SXGA1280[...]

73 Others CONTENTS Controlling the projector by using RS-232C Y ou can also control the projector by entering the command from a computer via RS-232C. CONTROL RS-232C Command list RS-232C 9600 bps, No parity , Data length: 8 bits, Stop bit: 1 bit STX (02h) Command (3Byte) ETX (03h) One command only can be used per communication. Commands shall be c[...]

74 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB(1) Digital RGB Video Y/P B /P R Camera Command Command Analog RGB(2) S-Video Picture Video mode A uto . KV0 - - - Y es - - (Continued) NTSC KV1 - - - Y es - - P AL KV2 - - - Y es - - SECAM KV3 - - - Y es - [...]

75 Others CONTENTS Controlling the projector by using RS-232C (continued) Continued Classification Items/Status Selection Adjustment Analog RGB(1) Digital RGB Video Y/P B /P R Camera Command Command Analog RGB(2) S-Video Color Color VCL Y es - - Y es Y es - Tint VTN Y es - - Y es - - R-le v el VLR Y es Y es Y es Y es Y es Y es G-le v el VLG Y es Y [...]

76 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB(1) Digital RGB Video Y/P B /P R Camera Command Command Analog RGB(2) S-Video Displa y Icon On MO0 - Y es Y es Y es Y es Y es (Continued) Off MO1 - Y es Y es Y es Y es Y es Menu position Upper left MP1 - Y e[...]

77 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB(1) Digital RGB Video Y/P B /P R Camera Command Command Analog RGB(2) S-Video Def ault setting Star tup screen On MS0 - Y es Y es Y es Y es Y es (Continued) Off MS1 - Y es Y es Y es Y es Y es Def ault settin[...]

78 Others CONTENTS Controlling the projector by using RS-232C (continued) Classification Items/Status Selection Adjustment Analog RGB(1) Digital RGB Video Y/P B /P R Camera Command Command Analog RGB(2) S-Video PIP PIP audio source Main P A0 - Y es Y es - - - (Continued) Sub P A1 - Y es Y es - - - PIP reset DR W - Y es Y es - - - A UT O SET P A T -[...]

79 Others CONTENTS Specifications Main unit P ower consumption TLP380: 300W (Standby: 20W) TLP381: 310W (Standby: 20W) Mass TLP380: 4.2kg TLP381: 5.0kg Dimensions TLP380: 338 x 95.5 x 265 (mm) (W/H/D) (Except the protrusion par ts) TLP381: 338 x 95.5 x 328 (mm) (W/H/D) Cabinet Material PC+ABS resin and ABS resin Ambient environment T emperature : 0[...]

80 Others CONTENTS Sold separately Replacement lamp TLPL78 • The design and specifications are subject to change without notice. T rademarks NEC , PC-98 ser ies are trademarks of NEC Cor poration. V GA, SV GA, XGA, SXGA, UXGA are trademarks or registered trademarks of Inter national Business Machines Corporation. Macintosh is a registered tradema[...]