TP-Link TD-W8910GB manual

TD-W8910GB 54M Wireless ADSL2+ Router Rev: 1.1.1 1910010013[...]

I COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trade marks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivati[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide II FCC ST A TEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation. This equipment ge nerate[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide III National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization r equire d for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. w ithin the b and 2454-2483.5 MHz Military Radiol ocation use. Refarming of the 2.4 GHz band has been[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide IV Package Contents The following items should be found in your package: ¾ One TD-W8910GB 54M Wireless ADSL2+ Router ¾ One DC power Adapter for TD-W8910GB 54M Wireless ADSL2+ Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD for TD-W8910[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide V CONTENTS Chapter 1. Product O verview .................................................................................. 1 1.1 Overview of the Router ............................................................................................. 1 1.2 Main Features ...................................[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide VI 4.5.5 Wireless – Statistics ....................................................................................................... 62 4.6 Diagnostics .............................................................................................................. 62 4.7 Management ................[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 1 Chapter 1. Product Overview 1.1 Overview of the Router Thank you for choosing the TD-W8910GB 54M Wireless ADSL2+ Ro uter . The Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet o r 802.11g/802.11b wireless network. TD-W8910GB connects to an Et[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 2 ¾ Adopts Advanced DMT modulati on and demodulation technology . ¾ Supports bridge mode and Router function. ¾ Multi-user sharing a high-speed Internet connection ¾ Conn ecting the internet on demand and disconnecti ng from the Internet when idle for PPPoE. ¾ Supports access control, p arents a[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 3 Chapter 2. Hardware Installation Guide 2.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 2-1 The LED indicators on the front panel include the Power , Sys tem , ADSL , WLAN and 1-4 (LAN) . The ADSL, WLAN and 1-4 (LAN) indicators m onitor link status and activity (Link/A[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 4 Figure 2-2 ¾ Line: Connect to the Modem Port of Splitter or to the telephone line. ¾ Reset Button: There are two ways to reset the Router's factory defaults. 1) Use the Restore Default function on Management -> settings page in the router's Web-based Utility. 2) Use the Factory Defau[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 5 ¾ Operating temperature : 0 ℃ ~40 ℃ (32 ℉ ~104 ℉ ). ¾ Operating Humidity : 10% ~ 90% RH Non-congealing. 2.6 Connecting the Router Before installing the Router, please make sure y our broadband service provided by yo ur ISP is available. If there is any probl em, please contact with your I[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 6 the service provider’s network back bone and ultimately to the Internet. 2.6.2.2. Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable If you wish to reserve the uplink port on the switch or hub for another dev[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 7 Chapter 3. Quick Installation Guide After connecting the Router to your network, you should configure it. This chapter describes how to quickly configure the basic f unctions of your Router. These procedures only take you a few minutes. You can access the Inter net via the Router immediately after [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 8 Figure 3-2 3. In the General tab of Internet Protocol (TCP/IP) Properties menu, highlight Internet Protocol (TCP/IP) under “This c onnection uses the following item s:” by clicking on it once. Click on the Properties button. Figure 3-3 4. Select “Obtain an IP address automatically ” by clic[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 9 Figure 3-4 ¾ Configure the IP address manually Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.16 8.1.1, DNS address is the value provided by ISP). ¾ Now, you can run the Ping com[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 10 Figure 3-5 If the result displayed is similar to that shown in figure below, it means that your PC has not connected to the Router. Figure 3-6 Please check it fo llowing these steps: 1. If the connection between your PC and the Router is correct? ) Note: The 1/2/3/4 LEDs of LAN port which you link[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 11 3.2 Configure the Router 1. Login to Home Page To use the web-based utility, launch a suitable web browser and di rect it to the IP address of the Router. Type http://192.168.1.1 in the address bar of the browser. A dialog box prompts for User name and Password . Type in the default User name admi[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 12 Figure 3-8 3. On the Connection Type screen, you can select a connec tion type (PPPoA, PPPoE, MER, IPoA or Bridging), which is provided by your ISP. We select PPPoE mode (For example), and then click “Next “to continue. Figure 3-9 4. Enter the PPP Username and PPP Pass word provided by your I [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 13 Figure 3-10 5. Use the default setting of this screen click “Next” to continue. Figure 3-11 6. Use the default IP Address 192.168.1.1 and Subnet Mask 255.255.255.0. Us e the default setting of “ Enable DHCP Server ”, and click “Next” to continue.[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 14 Figure 3-12 7. Use the default setting “ Enable Wireless ”. Default SSID is “TP-LI NK”, then click “Next”. Figure 3-13 8. You will see the WAN Setup-Summary screen below, click " Save/Reboot " to save these settings and reboot the Router.[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 15 Figure 3-14 ) Note: The reboot process will take a wh ile to complete, please wait befo re reopening your web browser. For more details of configuri ng the Router, please refer to 1 Chapter 4 Chapter 4. Basic Router Configuration This User Guide recommends using the “Quick Installation Guide” [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 16 Figure 4-1 There are six main menus shown on the screen, they are Device Info , Quick Setup , Advanced Setup , Wireless , Diagnostics and Management . Additional menus will be available after you click one of the main menus. Click one of the ma in menus, and you will be able to configure the corre[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 17 Figure 4-2 ) Note: Click the other submenus under the main menu Device Info , you will be able to view the corresponding information about WAN , Statistics , Route , ARP and DHCP . 4.3 Quick Setup Please refer to the Chapter 3 to get the detailed information. 4.4 Advanced Setup Choose “ Advanced[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 18 Figure 4-3 ¾ W AN Port Information T able: This table describes the W AN port settings and the relevant manipulation to each interface. ¾ Remove: Select the check box in the table (shown in Figure 4-3) and then click the Remove t ab, the corresponding interfac e will be deleted in the table. ¾ [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 19 Figure 4-4 1. Follow the instructions below to configure the A TM PVC on the screen (shown in Figure 4-4). Make sure you have the necessary in formation before you configure it. 1) Enter the VPI and VCI values provided by your ISP, they should not be changed unless you have been instructed to chan[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 20 configuration will be described in 5.4.5 Quality of Service . 2. Select the Connection T ype in the next screen (shown in Figure 4-5). Figure 4-5 1) Select the Connection Type and Encapsulation Mode your ISP has instr ucted you to use, the default connecti on type is Bridging. 2) If you want to ad[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 21 Figure 4-4) to configure them again. 1. PPPoA If you choose connection type PPPoA on the screen above (shown in Figure 4-5), you will see the screen belo w (shown in Figure 4-6). Follow the instru ctions to configure the WAN Interface. Figure 4-6 1) Enter the PPP Username and PPP Password provided[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 22 ) Note: If you are not sure about the PPP IP extension and PPP Debug Mode , please don’t select this option. Figure 4-7 5) Enable the IGMP Multicast and WAN Service on the screen above, if you are not sure about the IGMP, just leave the default setting. Note that if you want to adopt the PPPoA s[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 23 The information is same as the information in Figure 4-3. 2. PPPoE If you choose PPPoE in the previous screen (shown in Figure 4-5), the configuration is similar to PPPoA , the only difference is that you should set the PPPoE Service Name on the corresponding screen. You can refer to Chapter 4 to [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 24 select obtain default gateway automatically , and then the Router will automatically get gateway parameters from your ISP. If you are provided with a static gateway, please select Use the following default gateway , and then enter the gateway address. 3) Configure the DNS. If you are provided dy n[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 25 Security menu will be added to the Web- based Utility. We will descri be the detailed configuration in 5.4.4 NAT and 5.4.5 Security . 5) Click the Next button, and you will s ee the next screen which displays the detailed settings you’ve made (shown in Figure 4-11). Or else click the Back button[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 26 5. Bridge If you choose Bridging in the previous screen (shown in Figure 4-5), a screen will be displayed as shown below (shown in Figure 4-12). Figure 4-12 1) If you want to adopt the Bridge service, you have to select the Enable Bridge Service option in the screen above, or else the service will[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 27 The information of the figure shows above is same as the information in the Figure 4-3. 4.4.2 LAN Choose “ Advanced Setup ” Æ “ LAN ”, and you will see the LAN screen (shown in Figure 4-14 ) ， the section allows you to configure the Router’s LAN ports settings. Figure 4-14 ¾ IP Addre[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 28 ¾ DHCP Server: These settings allow you to confi gure the Router‘s Dynamic Host Configuration Protocol (DHCP) server function. The DHCP serv er is enabled by default for the Router ’s Ethernet LAN interf ace. DHCP service will supply IP settings to computers which are configured to automatica[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 29 3. Type the MAC Address(00:13:8F:A9:E6:CA for in stance) of the computer which you want to reserve an IP(192.168.1.100 for instance) for in the MAC Address text box; 4. Type the IP Address(192.168.1.100 for instance) you have reserve d in the Reserved IP Address text box; 5. Click save button to s[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 30 Figure 4-15 If you want to specify the MAC address of TD-W8910GB as your PC’s, you can press Clone MAC Address on the screen. Then click Save button to save your setting. 4.4.4 NAT When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT (shown in Figure 4- 10) for the typ[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 31 Figure 4-17 ¾ Virtual Server T able: The table indicates the informati on about the V irtual Server entries.  Server Name: This is the name of the Virtual Server . It is ex clusive and must be filled in.  External Port St art: The base number of External Ports. Y ou can type a service port [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 32 Figure 4-18 2. Select the service which you want to use from the drop-down lis t. If the list does not have the service you need, type the name of the custom service in the text box. 3. Type the IP Address of the computer in the Server IP Address text box. 4. Enter the External Port Start, Externa[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 33 4.4.4.2. Port Triggering Choose “ Advanced Setup ” Æ “ NAT ” Æ “ Port Triggering ”, you can set Port Triggering on the screen (shown in Figure 4-19). Some applications require that specific ports in the Router's firewall should be opened for access by remote devices. Port Trigge[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 34 Figure 4-20 2. Select the application from the drop-down list. If the list does not have the application that you want, select the Custom application radio-button, and type t he name of the custom application in the text box. 3. Enter the Trigger Port Start , Trigger Port End , Open Port Start and[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 35 Figure 4-21 To add a new DMZ Host : You can enter the computer 's IP address and then click Save/Apply to activate the DMZ host you set on this page. ) Note: DMZ host forwards all the ports at the same ti me. Any PC whose port is being forwarded must have its DHCP client function di sabled an[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 36 Figure 4-23 4.4.5.1. IP Filtering The IP addres s filtering feature makes it possible fo r administrators to contro l user's access to the Internet, which is based on user's IP . The IP address filtering includes Outgoing and Incoming , the detailed descriptions are provided below. IP Fi[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 37 Figure 4-25 2. Enter the Filter name for the rule, it is excl usive and must be filled. 3. Select the protocol: TCP/UDP , TCP , UDP or ICMP in the drop-down list for the connection between the Source IP address and Destination IP address. 4. Enter a Source IP Address in dotted-decimal notati on fo[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 38 Figure 4-26 Setup an Incoming IP Filtering rule: 1. Click the Add button (pop-up Figure 4-26), and t hen you will set the new rule in the next screen (shown in Figure 4-27). Figure 4-27 2. Enter the Filter name for the rule, it is excl usive and must be filled in. 3. Select Protocol in the drop-do[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 39 suggests that all Source IP addresses and/or Destination IP addresses are controlled by the rule, if you leave the Source Port and/or Destination Port blank, it sugges ts that all Source Ports and/or Destination Ports are controlled by the rule. 4.4.5.2. MAC Filtering Choose “ Ad vanced Set up ?[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 40 Figure 4-29 2. Select Protocol Type in the drop-down list for the rule. 3. Enter Destination MAC Address and Source MAC Address in the text box. 4. Select Frame Direction in the drop-down list for the rule. 5. Select the WAN interfaces , you can leave the default settings also. 6. Click the Save/A[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 41 1. Click the Add button (pop-up Figure 4-30), and t hen you will set the new rule in the next screen (shown in Figure 4-31). Figure 4-31 2. Enter the User Name of the LAN device c onnected to the Router. 3. To restrict the device where t he browser is running, select the Browser's MAC Address[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 42 Figure 4-32 Click the Add button, and you can configure t he QoS on the next screen (shown in Figure 4-33). Figure 4-33[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 43 After you specify the condition, click the Save/Apply button to save the entry. ) Note: A rule must be consisting of a class name and at least one condition abo ve. All of the specified conditions in this classificati on rule must be satisfied with the rule to take effect. 4.4.7 Routing Choose “[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 44 enabled PVC(s). If the check-box is not selected, enter the static Default Gateway IP and/or a WAN Interface , you can leave the WAN Interface default. Then click Save/Appl y butt on to save it. ) Note: If changing the Automatic Assigned Default Gateway from unselected to selected, you have to reb[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 45 2. Enter the following data: ¾ Destination Network Address: The Destination Netw ork Address is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask: The Subnet Mask determines whi ch portion of an IP Address is the network portion, and which portion is the[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 46 4.4.8 DNS When you select the connection type PPPoE, PPPoA , MER or IPoA for WAN configuration, you will see the DNS menu in the Web-based Utility (shown in Figure 4-39). It includes DNS Server and Dynamic DNS submenus. Figure 4-39 4.4.8.1. DNS Server Choose “ Advanced Set u p ” Æ “ DNS ”[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 47 ) Note: You have to reboot the Router to make the new configuration take effect. 4.4.8.2. Dynamic DNS Choose “ Ad vanced Set up ” Æ “ DNS ” Æ “ Dynamic DNS ”, you can see the D ynamic DNS screen, this screen allows you to confi gure the Dynamic DNS (shown in Figure 4-41). The Router [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 48 Figure 4-42 ) Note: This page allows you to add a Dynamic DNS address from DynDNS.org,TZO or No-IP . 2. Select D-DNS provider (DynDNS.org,TZO or No-IP) in the drop-down list. 3. Enter the Hostname of the DNS Server, and select the corresponding Interface for the DDNS, you can leave it default. 4. [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 49 Figure 4-43 You can select the modulation type, phone line pair and the capabilit y of Bitswap or SRA. After you set them up, click the Save/Apply button to save the configurations. 4.4.10 Port Mapping Choose “ Advanced Setup ” Æ “ Port Mapping ”, you can see the Port Mapping screen, this[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 50 Click the Add/Edit button, and then you can configure the Port Mapping in the next screen (shown in Figure 4-45). After you confi gure the settings, click the Save/Apply button to sa ve it. Figure 4-45[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 51 4.5 Wireless LAN Configuration The menus used to configure Wirele ss LAN settings available in t he Wireless directory including Basic, Security, MAC Filter, Ad vanced, and Statistics menus. The Wireless Basic, Security, MAC Filter, Advanced, and Statis tics are described below. 4.5.1 Wireless –[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 52 4.5.2 Wireless – Security Choose “ Wireless ” Æ ” Security ”, you will see the screen of Wireless-Security settings shown as below. Figure 4-47 This page allows you to configure security features of the wirele ss LAN interface. You can set the network authentication method, se lecting d[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 53 Figure 4-48 ¾ Encryption strength: Select the appropriate level of enc ryption, 64-bit, 128-bit or 152-bit. ¾ Current Netw ork Key: To indicate which WEP key to use, select a transmission key number. ¾ Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network K[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 54 encryption keys, enter 13 ASCII characte rs or 26 hexadecimal digits for 128-bit encryption keys, enter 16 ASCII characte rs or 32 hexadecimal digits for 152-bit encryption keys. 4. Click the Save/Apply button to save the new configuration. Figure 4-49 ) Note: We use Encryption Strength 64-bit, Cu[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 55 Figure 4-50 ¾ WPA Group ReKey Interval: Enter the Key Renewal period, wh ich tells the Router how often it should change encryption keys. ¾ RADIUS Server IP Address: The IP address of the RADIUS server. ¾ RADIUS Port: The port of the RADIUS server. The default number is 1812. ¾ RADIUS key: The[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 56 Figure 4-51 4.5.2.3. WPA-PSK WPA-PSK requires a shared key and does not use a separate server for aut hentication. PSK keys can be ASCII or Hex type. Figure 4-52 ¾ WPA Pre-Shared Key: Enter the key shared by the Router and your other network devices. It must have 8-63 ASCII characters or 64 Hexad[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 57 ASCII or Hex type. 3. Change the Group Ke y Interval as desired or use the default setting. 4. Click the Save/Apply button to save the new configuration. Figure 4-53 ) Note: If you click the option “ Click here to display ”, the Figure 4-54 will pop-up, and it shows the password you have set. [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 58 Figure 4-55 4.5.2.5. WPA2-PSK To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu will change to offer the appropriate settings . WPA2-PSK requires a shared key and does not use a separate server for authentication. PSK keys can be ASCII or Hex type. Figure[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 59 Figure 4-57 4.5.2.7. Mixed WPA2/WPA-PSK To configure Mixed WPA2/WPA-PSK settings, select the Mixed WPA2/WPA-PSK option from the drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are the same with WPA-PSK. Figure 4-58 4.5.3 Wireless -- MAC Filter Choo[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 60 Figure 4-59 Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS. To filter wire less users by MAC Address, either permitting or blocking access. If you do not wish to filter users by MAC Address, select Disabled. ¾ Allow: [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 61 Figure 4-61 ¾ Channel: Select the channel you want to use from the drop-dow n List of Channel. This field determines which operating frequen cy will be used. It is not necessary to change the wireless channel unless you notice interferenc e problems with another nearby access point. ¾ Fragmentat[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 62 ¾ Mode: In the drop-down list you can select “54Mbps (802.1 1g)” or “11Mbps (802.11b)”. "54Mbps (802.11g)", which a llows both 802.11g and 802.11b wirele ss stations to connect to the Router. 4.5.5 Wireless – Statistics Choose “ Wireless ” Æ ” Statistics ”, you will s[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 63 4.7 Management Choose “ Management ”, there are six submenus under the main menu. They are Settings , System Log , TR-069 client , Internet Time , Access Control , Update Softw are and Reboot . Click any of them, and you will be able to configure the corre sponding function. 4.7.1 Settings Thi[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 64 Figure 4-66 2. Click the Save button, and save the file as the appointed file (shown in Figure 4-67). Figure 4-67 4.7.1.2. Update Choose “ Management ” Æ “ Settings ” Æ “ Update ”, you can see the Update screen, this screen (shown in Figure 4- 68) allows you to update the Router’s [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 65 Figure 4-68 To update the Router’s settings: 1. Click the Brow se button to locate the update file for the device, and you can also enter the exact path to the Setting file in the text box. 2. After you have selected the file for updating the settings, click the Update S ettings button. ) Note: [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 66 Figure 4-70 T o View the System Log: Click the Vie w System Log button, you will see the screen (shown in Figure 4-71) which displays the Router ’s recent logs. Figure 4-71 ¾ Refresh: Click the button, the informati on in the table will be updated. ¾ Close: Click the button, the screen will be[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 67 Figure 4-72 ¾ Disable/Enable: Select the Enable to log the events, if you don’t want to log these events, please select Disable . ¾ Log Level: Select the Log level in the drop-down list, for the Log level, all events above or equal to the selected level will be logged. ¾ Display Level: Select[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 68 Figure 4-73 To set the Router’s time: 1. Select automatically synchronize with Internet time servers. 2. Select the First NTP time server and/or t he Second NTP time server in the drop-down list severally. 3. Select your local time zone. 4. Click Save/Apply button. ) Note: a) This setting will b[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 69 Figure 4-74 ¾ Inform: You can select the checkbox to disable or enable the Inform Interval. ¾ Inform Interval: Type the interval time of your Router contact with the ACS . ¾ ACS URL: Please accept this information from your ISP. And through ACS (Auto-Configuration Server) you can perform auto-c[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 70 4.7.5 Access Control This section provides three submenus including Services , Addresses and Passw ord (shown i n Figure 4-75), the detailed descriptions are provided below. Figure 4-75 4.7.5.1. Services Choose “ Management ” Æ “ Ac ces s Control ” Æ “ Services ”, you can see the Ser[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 71 Figure 4-77 To add the IP Address: 1. Click the Add button. You can add a new IP Address in the next screen (shown in Figure 4-78 ). Figure 4-78 2. Enter the IP address of the managem ent stat ion permitted to access the local management services. 3. Click the Save/Apply button to save the IP Addr[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 72 Figure 4-79 To change the password: 1. Enter the Old Password in the text box. 2. Enter the Ne w Pa ss wor d and Confirm Password . The Confirm Password should be the same as the New Password. 3. Click the Save/Apply button to make your change take effect. ) Note: The password cannot contain a spa[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 73 To update the Router's software: 1. Downl oad the latest software upgrade file from the TP-LINK website ( www.tp-link.com). 2. Click Bro w se to view the folders and select the image file or enter the exact path to the image file location in the text box. 3. Click the Update Software button. [...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 74 Appendix A: Glossary Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also us ed to expand the range of a wireless network. Ad-hoc Netw ork - An ad-hoc network is a group of co mputers, each with a wireless adapter, connected as[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 75 Firewall - A set of related programs located at a net work gateway server that protects the resources of a network from users from other networks. Gateway - A device that interconnects networks with different, incompatible communications protocols. IEEE 802.11b - The IEEE 802.11b standard s pecifi[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 76 Ethernet, this protocol is used as a type of broadband connection that provides authentication (username and password) in addition to data transport. PPPoA (P oint to P oint P rotocol ove r ATM) - PPPoA stands for Point to Point protocol over ATM, this protocol is also used as a type of broadb and[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 77 WAN ( W ide A rea N etwork) - Networks that cover a large geographical area. Web-based Utility - The web page that allows you to manage the Router. WEP (W ired E quivalent P rivacy ) - A data privacy mechanism based on a 64-bit or 128-bit or 152- bit shared key algorithm, as descr ibed in the IEEE[...]

TD-W8910GB 54M Wireless ADSL2+ Router User Guide 78 Appendix B: Specifications Supporting Standards and Protocols ANSI T1.413, ITU G.992.1, IT U G.992.2, ITU G.992.3, ITU G.992.5, IEEE 802.11b , IEEE 802. 11g , IEEE 802.3, IEEE 802.3u, TCP/IP, IPoA , PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, N AT LAN Ports Four 10/100M Auto-Negotiation RJ45 ports （ [...]