Go to page of
Similar user manuals
-
Network Router
TP-Link TL-SG1008P
16 pages 0.66 mb -
Network Router
TP-Link TL-WR700N
175 pages 2.04 mb -
Network Router
TP-Link TL-WR741ND
113 pages 2.62 mb -
Network Router
TP-Link TL-WN822N
42 pages 1.44 mb -
Network Router
TP-Link 1.0.0 1910010798
47 pages 1.96 mb -
Network Router
TP-Link ADSL2/2+
54 pages 3.83 mb -
Network Router
TP-Link TL-R460
18 pages 1.19 mb -
Network Router
TP-Link TL-R860
65 pages 1.68 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of TP-Link TL-WA7510N, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of TP-Link TL-WA7510N one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of TP-Link TL-WA7510N. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of TP-Link TL-WA7510N should contain:
- informations concerning technical data of TP-Link TL-WA7510N
- name of the manufacturer and a year of construction of the TP-Link TL-WA7510N item
- rules of operation, control and maintenance of the TP-Link TL-WA7510N item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of TP-Link TL-WA7510N alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of TP-Link TL-WA7510N, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the TP-Link service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of TP-Link TL-WA7510N.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the TP-Link TL-WA7510N item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
TL-WA7510N -WA7510N 5GHz 150Mbps Outdoor Wireless Access Point 5GHz 150Mbps Outdoor Wireless Access Point Rev: 1.0.0 1910010534[...]
-
Page 2
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD . Other brands and product na mes are trademarks or registered trademarks of their respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ[...]
-
Page 3
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protection against harmful interference in a residential in stallation. This equipment ge nerates uses and can radiate radio frequency energy and, if [...]
-
Page 4
TP-LINK TECHNOLOGIES CO., LTD DECLARA TION OF CONFORMITY For the following equipment: Product Description: 5GHz 150Mbp s Out door Wireless Access Point Model No.: TL-W A7510N T rademark: TP-LINK We declare under our own respon sibility that the above products satisfy all the technical regulations applicable to the product with in the scope of Counc[...]
-
Page 5
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ......................................................................................... 2 1.1 Product Overview .....................................................................................[...]
-
Page 6
4.7.5 Antenna Alignment ....................................................................................... 59 4.7.6 Distance Settings .......................................................................................... 59 4.7.7 Throughput Monitor ...................................................................................... 60 4.[...]
-
Page 7
5.7.6 Distance Settings ........................................................................................ 110 5.7.7 Throughput Monitor .................................................................................... 110 5.7.8 Wireless Statistics ...................................................................................... 111 5.[...]
-
Page 8
5.17.5 Backup & Restore ....................................................................................... 149 5.17.6 Reboot ........................................................................................................ 149 5.17.7 Password ...........................................................................................[...]
-
Page 9
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 1 Package Contents The following items should be found in your package: ¾ One TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point ¾ One Power Injector ¾ Ethernet Cable ¾ One Power Adapter for TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point ¾ Mounting Kits ¾ Quick Install[...]
-
Page 10
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 2 Chapter 1 Introduction 1.1 Product Overview The TL-WA7510N 5GHz 1 50Mbps Outdoor Wire less Access Point is ded icated to outdoor wire less network solu tions. The TL-WA751 0N 5GHz 150Mbps Outdo or Wireless Acce ss Point will allow you to connect y our networ k with other wireless de[...]
-
Page 11
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 3 ¾ Supports AP Client Router Mode for WISP CPE ¾ Supports passive power over Ethernet ¾ Supports Wireless Distribution System (WDS) ¾ Supports Antenna Alignment ¾ Provides throughput monitor indicating the current wireless throughput ¾ Supports Layer 2 User Isolation ¾ Support[...]
-
Page 12
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 4 View from left to right, the parts are explained below. ¾ RP-SMA: This is where you can conn ect an outside antenna. For this AP, the antenna is built inside, and usually there is no nec essity to connect an outside one. ¾ LAN: This port is used to connect to the PO E port of the [...]
-
Page 13
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 5 Chapter 2 Connecting the Device 2.1 System Requirement s ¾ Each PC in the LAN needs a working Ether net Adapter and an Ether net cable with RJ45 connectors. ¾ TCP/IP protocol must be installed on each PC. ¾ Web browser, such as Microsoft Internet Expl orer 5.0 or later, Netscape [...]
-
Page 14
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 6 ¾ Access Point This operation mode allows wireless stations to access. Figure 2-1 Hardware Installation of the TL-W A7510N in Access Point mode 1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the LAN port of the Power I[...]
-
Page 15
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 7 Figure 2-2 Hardware Installation of the TL-W A7510N in Multi-SSID mode 1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the LAN port of the Power Injector to the wired network port with an Ethernet cable. 3. Plug one end [...]
-
Page 16
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 8 1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the PC to the LAN port of the Power Injector with an Ethernet cable. 3. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end in elect[...]
-
Page 17
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 9 Figure 2-5 Hardware Installation of the TL-W A7510N in S tandard AP -- Bridge mode 1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet cable. 2. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end in el[...]
-
Page 18
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 10 2.3.3 AP Client Router Mode Figure 2-7 Hardware Installation of the TL-W A7510N in AP Client Router mode 1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet cable. 2. Connect the PC to the LAN port of the Power Injector with an Ethernet cabl[...]
-
Page 19
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 11 Chapter 3 Quick Installation Guide 3.1 Configuring the PC This chapter will guide you to c onfigure your PC to communicate with the AP. The wireless adapter-equipped computers in your network must be in the same IP Address range without overlapping with each other . Manually config[...]
-
Page 20
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 12 Figure 3-2 3. In the General tab of Internet Protocol (TCP /IP) Properties window , highlight Internet Protocol (TCP/IP) and click Properties. Figure 3-3[...]
-
Page 21
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 13 4. Configure the IP address manually . 1) Select Use the follow ing IP address . 2) Enter 192.168.1.* (* is any integer between1 to 253) into the IP address filed, 255.255.255.0 into the Subnet mask filed. 3) Click OK to keep your settings. Figure 3-4 5. V erify the network connec [...]
-
Page 22
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 14 Figure 3-5 If the result displayed is similar to that shown in Figure 3-6 below, it means that your PC has not connected to the AP. Figure 3-6 Please check following these steps: a) Check to see if your PC a nd the AP are right connected. The LED of LAN port which you link to on th[...]
-
Page 23
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 15 Enter admin for the User Name and Password (both in lower case letters) in Figure 3-8 below . Then click OK or press Enter. Figure 3-8 Login Windows ) Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Opt[...]
-
Page 24
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 16 Figure 3-10 Choose Operation Mode ¾ Standard AP : In this mode, the device enables multi- users to access, and provides several wireless modes. such as AP, Client, Repeater and so on ¾ AP Router : In this mode, the device enables multi-us ers to share Internet via ADSL/Cable Mode[...]
-
Page 25
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 17 Figure 3-1 1 ¾ Operation Mode - Several Operation Modes are support ed, including: Access Point, Multi-SSID, Client, Repeater, Univer sal Repeater, and Bridge with AP . The available setting options are different in various operation modes. 1) Access Point – This operation mode [...]
-
Page 26
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 18 Figure 3-12 z Wireless Radio - Enable or disable the wireless radio. z SSID - Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network . The default SSID is set to be TP-LINK _xxxxxx (xxxxx x indicates the last unique six [...]
-
Page 27
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 19 z Mode - This field determines the wireless mode which the AP works on. z Max Tx Rate - You can limit the maximum tx ra te of the AP through this field. You can select one of the following security options: z Disable Security - The wireless security function can be enabled or disab[...]
-
Page 28
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 20 z Enable VLAN - Check this box to enable the VLAN f unction. The AP supports up to 4 VLANs. All wireless PCs in the VLANs are able to access this AP. The AP can also work with an IEEE 802.1Q Tag VLAN supporting Switch. If this Switch enables the Tag VLAN function, besid es all wire[...]
-
Page 29
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 21 For Hexadecimal , the length should be bet we en 8 and 64 characters. Please note that the key is case sensitive. z Not Change - If you chose this option, wireless se curity configurat ion will not change. 3) Client – The device will act as a wireless station to enable wired host[...]
-
Page 30
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 22 Note Dialog You can select one of the following security options: z Disable Security - The wireless security function can be enabled or disabl ed. If disabled, the wireless stations will be able to connect the AP without encryption. It is recommended strongly that you choose one of[...]
-
Page 31
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 23 z Wireless Radio - The wireless radio of the AP can be en abled or disabled to allow or deny wireless stations to access. If enabled, the wire less stations will be able to access the AP; otherwise, wireless stations will not be able to access the AP. z MAC of AP - Enter the MAC ad[...]
-
Page 32
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 24 Figure 3-16 z Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wi reless stations will be able to access the AP; otherwise, wireless stations will not be able to access the AP. z MAC of AP - Enter[...]
-
Page 33
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 25 z PSK Password - You can enter ASCII or Hexadecimal characters. For ASCII , the length should be bet ween 8 and 63 characters. For Hexadecimal , the length should be bet we en 8 and 64 characters. Please note that the key is case sensitive. z Not Change - If you chose this option, [...]
-
Page 34
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 26 AP in a region other than one of thos e specified in this filed. If your country or region is not listed, please contact your local government agency for assistance. z When you select your local regi on from the pull-down list, click the Save button, then the Note Dialog appears. C[...]
-
Page 35
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 27 3.2.2 AP Router Mode When you choose AP Router Mode on Operation Mode page in Figure 3-10 , take the following steps: 1. Click Next in Figure 3-10, and then WAN Connection T ype page will appear as shown in Figure 3-19 . Figure 3-19 ¾ Auto Detect - If you don't know the conne[...]
-
Page 36
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 28 Figure 3-21 2) Enter the User Name and Password provided by your ISP and then click Next , Figure 3-22 will appear. Figure 3-22 z Wireless Radio - Enable or disable the wireless radio. z SSID - Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wire[...]
-
Page 37
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 29 z Mode - This field determines the wireless mode which the Device works on. z Max Tx Rate - You can limit the maximum tx rate of the Device through this field. You can select one of security options listed as the below items. z Disable Security - The wireless security function can [...]
-
Page 38
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 30 2) After you have entered the above necessary parameters and then click Next , Figure 3- 22 will then appear. 2. When you finish the wireless setting in Figure 3-22 and click Next , then Figure 3-24 will appear, where you can click Fini sh button to complete the Quick Setup . Figur[...]
-
Page 39
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 31 Figure 3-26 2) Enter the User Name and Passw ord provided by your ISP, then click Next , Figure 3-27 will appear. Figure 3-27 z SSID - The SSID of the AP your Device is going to connect to as a clien t. You can also use the search function to select the SSID to j oin. z BSSID - The[...]
-
Page 40
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 32 z Password - If the AP your Device is going to c onnect needs password, you need to fill the password in this blank. ¾ Dyn amic IP - When the Device connects to a DHCP server, or the ISP supplies you with DHCP connection, pl ease choose this type. The Device w ill get the IP addre[...]
-
Page 41
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 33 Chapter 4 Configuring Standard AP Mode This chapter will show each Web page's key f unctions and the configur ation way under Standard AP Mode. 4.1 Login Open your web browser . T ype in the default address http://192.168.1.254 in the address field of web browser and then pres[...]
-
Page 42
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 34 Figure 4-3 the main menu 4.2 St atus Selecting Status will enable you to view the AP’s current st atus and configuration, all of which are read-only. Figure 4-4 S tatus[...]
-
Page 43
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 35 ¾ Firmware Version - The current firmware version of the AP. ¾ Hardware Version - The current hardware version of the AP. ¾ LAN - The following is the information of wir ed LAN. You can conf igure them in the Netw ork page. z MAC Address - The physical address of the sy stem, as[...]
-
Page 44
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 36 Select menu QSS , you will see the next screen as shown in Figure 4-5 . Figure 4-5 QSS ¾ QSS Status - Enable or disable the QSS function here. ¾ Current PIN - The current value of the Device's PI N displayed here. The default PIN of the Device can be found in the label or Us[...]
-
Page 45
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 37 Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-5 , and then the following screen will appear. Figure 4-6 Add A New Device Step 2: Choose “ Press the button of the new device in two minutes ” and click Connect . Step 3: Configure the w[...]
-
Page 46
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 38 Figure 4-8 The QSS Configurati on Screen of Wireless Adapter II. By PIN If the device supports Wi-Fi Protec ted Setup and the PIN method, you can add it to the network by PIN in the following two methods. Method One: Enter the PIN into my AP Step 1: Keep the default QSS Status as E[...]
-
Page 47
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 39 Step 3: Configure the wireless adapter for QSS function by choosing “ Enter a PIN into my access point or a registrar ” in the configuration utility of t he QSS as below, and click Next . Figure 4-10 The QSS Configurati on Screen of Wireless Adapter ) Note: In this example, the[...]
-
Page 48
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 40 Figure 4-1 1 The QSS Configuration S creen of Wireless Adapter ) Note: The default PIN code of the AP can be found in its label or the QSS configuration screen as in Figure 4-5 . You will see the following screen w hen the new device has successf ully connected to the network. Figu[...]
-
Page 49
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 41 4.5 Operation Mode Figure 4-13 ¾ Standard AP : In this mode, the device enables multi- users to access, and provides several wireless modes, such as AP, Client, Repeater and so on. ¾ AP Router : In this mode, the device enables multi-us ers to share Internet via ADSL/Cable Modem.[...]
-
Page 50
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 42 Figure 4-15 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can get IP address from DHCP server, or choosing static IP to r the IP address of your system in dotted-decimal notation (factory default: determines the size of the network. Nor[...]
-
Page 51
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 43 Filtering , Wireless Advanced , Antenna Alignment, Distance Settings, Throughput Monitor and Wireless Statistics . Figure 4-16 Wireless menu Click any of them, and you will be able to conf igure the corresponding f unction. The detailed explanations for each submenu are provide d b[...]
-
Page 52
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 44 1) Access Point Figure 4-17 Wireless Security - Access Point ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - The wireless security function can be e nabled or disabled . If disabled, the wireless stations will be able to connect t he AP without encryptio[...]
-
Page 53
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 45 Shared Key - Select 802.11 Shared Key authentications. Open System - Select 802.11 Open Sy stem authentication. z WEP Key Format - You can select ASCII or Hexadecimal format. ASCII Format stands for any combination of keyboard characters in t he specified length. Hexa decimal forma[...]
-
Page 54
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 46 ¾ WPA-PSK/WPA2-PSK z Version - You can select one of following versions: Automatic - Select WPA-PSK or WPA2-PSK automatic ally based on the wireless station's capability and request. WPA-PSK - Pre-shared key of WPA. WPA2-PSK - Pre-shared key of WPA2. z Encryption - You can se[...]
-
Page 55
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 47 ¾ Disable Security - Check this box radio button to disabl e wireless security. If disabled, the wireless stations will be able to connect this d evice without encrypti on. It is strongly recommended that you choose one of the security types to enable security. ¾ WPA/WPA2 - Selec[...]
-
Page 56
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 48 3) Client Figure 4-19 Wireless Security – Client ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disabl e wireless security. If disabled, the wireless stations will be able to connect this d evice without encrypti on. It [...]
-
Page 57
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 49 For 64-bit encryption - You can enter 10 hexadecim al digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters. For 128-bit encryption - You can enter 26 hexadecimal digits ( any combination of 0-9, a-f , A-F, zero key is not permitted) or 13 ASCII[...]
-
Page 58
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 50 4) Repeater Figure 4-20 Wireless Security – Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disabl e wireless security. If disabled, the wireless stations will be able to connect this d evice without encrypti on.[...]
-
Page 59
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 51 For 64-bit encryption - You can enter 10 hexadecim al digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters. For 128-bit encryption - You can enter 26 hexadecimal digits ( any combination of 0-9, a-f , A-F, zero key is not permitted) or 13 ASCII[...]
-
Page 60
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 52 5) Universal Repeater Figure 4-21 Wireless Security – Universal Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disabl e wireless security. If disabled, the wireless stations will be able to connect this d evice [...]
-
Page 61
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 53 z Key Type - You can select the WEP key length ( 64-bit , or 128-bit , or 152-bi t .) for encryption. "Disabled" means this WEP key entry is invalid. For 64-bit encryption - You can enter 10 hexadecim al digits (any combination of 0-9, a-f, A-F, zero key is not permitted)[...]
-
Page 62
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 54 Figure 4-22 Wireless Security – Bridge with AP ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disabl e wireless security. If disabled, the wireless stations will be able to connect this d evice without encrypti on. It is[...]
-
Page 63
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 55 For 64-bit encryption - You can enter 10 hexadec imal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters. For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII c[...]
-
Page 64
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 56 ¾ Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering. The default setting is disabled. ¾ To Add a Wireless MAC Addre ss filtering entry, click the Add New… button. The “ Add or Modify Wireless MAC Address Filtering entry " page [...]
-
Page 65
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 57 ¾ To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If y ou want to delete the entry, click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all the Entries enabled. Click the Disable Al[...]
-
Page 66
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 58 Figure 4-25 Wireless Advanced ¾ Antenna Settings - The polarization of an antenna. You can select Vertical Antenna, Horizontal Antenna or External Antenna. ¾ Transmit Power - Here you can specify the transmit power of the Device. You can select High, Middle or Low whichever you w[...]
-
Page 67
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 59 4.7.5 Antenna Alignment Selecting Wireless > Antenna Alignment will shows how remote AP's signal strength changes while changing the antenna's direction. Figure 4-26 Antenna Alignment ¾ Remote AP RSSI - Remote AP's signal strength value. ¾ Signal percent - The r[...]
-
Page 68
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 60 4.7.7 Throughput Monitor Selecting Wireless > Throughput Monitor will help to watch wireless throughput information in the following screen shown in Figure 4-28 . Figure 4-28 Throughput Monitor ¾ Rate - The Throughput unit. ¾ Run Time - How long this function is running. ¾ Tr[...]
-
Page 69
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 61 Figure 4-29 Wireless S tatistics ¾ MAC Address - the connected wireless st ation's MAC address. ¾ Current Status - the connected wireless station's r unning status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnect[...]
-
Page 70
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 62 Figure 4-30 The DHCP menu 4.8.1 DHCP Settings Selecting DHCP > DHCP Settings will enable you to set up the AP as a DHCP server, which provides the TCP/IP configuration for all the PC s that are connected to the system on th e LAN. The DHCP Serv er is Disable by defa ult, an d ca[...]
-
Page 71
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 63 ¾ Secondary DNS - (Optional) You can input the IP Addre ss of another DNS server if your ISP provides two DNS servers. ) Note: 1. When the device is working on Dynamic IP mode, the DHCP Serv er function will be disabled. 2. To use the DHCP server functi on of the device, you shoul[...]
-
Page 72
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 64 Figure 4-33 Address Reservation ¾ MAC Address - The MAC Address of the PC that you want to reserve an IP address for. ¾ Reserved IP Address - The IP address that the device reserved. ¾ Status - It shows whether the entry is enabled or not. ¾ Modify - To modify or delete an exis[...]
-
Page 73
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 65 4.9 System T ools The System Tools option helps you to optimize the configuration of your device. There are ten submenus under the System Tools menu (shown as Figure 4-34 ): SNMP , Diagnostic , Ping Watch Dog , Speed Test , Firmware Upgrade , Factory Defaults , Backup & Restore[...]
-
Page 74
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 66 Figure 4-35 SNMP Settings ¾ SNMP Agent - Choose Enable to open this function if you want to have remote control through SNMPv1/v2 agent with MIB-II. Choose Disable to close this function. ¾ SysContact - The textual identificat ion of the contact pers on for this managed node. ¾ [...]
-
Page 75
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 67 ) Note: A restricted source can be a spec ific IP address (e.g. 10.10.10.1) , or a subnet - represented as IP/BITS (e.g. 10.10.10.0/24). If an IP Address of 0. 0.0.0 is sp ecified, t he agent will accept all requests under the corresponding community name. Click the Save button to [...]
-
Page 76
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 68 ) Note: Y ou can use pi ng/tracero ute to test both numeric IP address or domain nam e. If pinging/t racerouting the IP address is successful, but pinging/tra cerouting the domain name is not, you migh t have a name resol ution probl em. In this case, ensur e that the d omain name [...]
-
Page 77
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 69 Figure 4-38 Ping W atch Dog Utility ¾ Enable - Turn on/off Ping Watch Dog. ¾ IP Address - The IP address of the target host w here the Ping Watch Do g Utility is sending ping packets. ¾ Interval - Time internal between two ping packe ts which are sent out continuously. ¾ Delay [...]
-
Page 78
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 70 Figure 4-39 S peed T est Utility ¾ Destination IP- The Remote device's IP address ¾ Transmit - Estimate the outgoing throughput (Tx). ¾ Receive - Estimate the ingoing throughput (Rx). Be sure to click the Run Test button to start a new test after you fill enough information[...]
-
Page 79
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 71 2. Enter or select the path name where you save the downloaded file on the computer into the File Name blank. 3. Click the Upgrade button. 4. The Device will reboot while the upgrading has be en finished. ) Note: 1. The firmware version must correspond to the hardw are. 2. The upgr[...]
-
Page 80
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 72 4.9.7 Backup & Restore Selecting System Tools > Backup & Restore allows you to save all configu ration settings to your local computer as a file or restore the device's configuration on the screen shown in Figure 4-42 . Figure 4-42 Save or Restore the Configuration [...]
-
Page 81
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 73 Click the Reboot button to reboot the Device. ¾ Some settings of the Device will take effect only after rebooting, including: z Change the LAN IP Address (syst em will reboot automatically.). z Change the DHCP Settings. z Change the Wireless configurations. z Change the Web Manage[...]
-
Page 82
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 74 4.9.10 Sy stem Log Selecting S ystem Tools > System Log allows you to query th e Logs of the device on the screen shown in Figure 4-45 . Figure 4-45 System Log ¾ Auto Mail Feature - Indicates whether auto mail feature is enabled or not. ¾ Mail Settings - Set the receiving and [...]
-
Page 83
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 75 Chapter 5 Configuring AP Router & AP Client Router Mode This chapter will show each Web page's key func tions and the configurat ion way in AP Router mode as well as AP Client Router mode. ) Note: The setting W eb pages of these two modes are mo stly the sa me, with only t[...]
-
Page 84
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 76 ) Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings , in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it . After a successful log[...]
-
Page 85
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 77 Figure 5-4 S tatus ¾ LAN - The following parameters apply to the LAN port of the Device. Y ou can configure them in the Network -> LAN page. z MAC Address - The physical address of the Device, as seen from the LAN. z IP Address - The LAN IP address of the Device. z Subnet Mask [...]
-
Page 86
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 78 z Channel - The current wireless channel in use. z Mode - The current wireless mode which the Device works on. z Max Tx Rate - The maximum tx rate. z MAC Address - The physical address of the De vice, as seen from the WLAN. z Client Status - The status of client. Init: Connection i[...]
-
Page 87
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 79 5.3 Quick Setup Please refer to Section 3.2 Quick Setup – 3.2.2 AP Router Mode or Section 3.2 Quick Setup – 3.2.3 AP Client Router Mode for more details. 5.4 QSS This section will guide you to add a new wire less device to an existing network quickly by QSS (Quick Secure Setup)[...]
-
Page 88
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 80 ) Note: To build a successful connection by QSS, you s hould also do the corresponding configur ation on a wireless adapter for QSS function meanwhile. For the configuration of the new device, here takes the Wireless Adapter of our company for example. I. By PBC Step 1: Keep the de[...]
-
Page 89
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 81 Figure 5-7 The QSS Configurati on Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click Fini sh to complete the QSS configuration. Figure 5-8 The QSS Configurati on Screen of Wireless Adapter II. By PIN If the device supports Wi-Fi Protec ted Setu[...]
-
Page 90
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 82 Method One: Enter the PIN into my AP Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 5-5 , and then the following screen will appear. Figure 5-9 Add A New Device Step 2: Choose “ Enter the new device's PIN ” and enter the PIN code ?[...]
-
Page 91
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 83 Figure 5-10 The QSS Configurati on Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my AP. Step 1: Get the Current PIN code of the AP in Figure 5-5 (each AP has its unique [...]
-
Page 92
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 84 Figure 5-1 1 The QSS Configuration S creen of Wireless Adapter ) Note: The default PIN code of the AP can be found in its label or the QSS configuration screen as in Figure 5-5 . You will see the following screen w hen the new device has successf ully connected to the network. Figu[...]
-
Page 93
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 85 5.5 Operation Mode Figure 5-13 ¾ Standard AP : In this mode, the device enables mult i-users to accessing, and provides several wireless modes. Such as AP, Client, Repeater and so on. ¾ AP Router : In this mode, the device enables multi-us ers to share Internet via ADSL/Cable Mod[...]
-
Page 94
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 86 5.6.1 LAN Choose menu “ Network > LAN ”, and then you can configure the IP parameters of the LAN on the screen as below. Figure 5-15 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can not be changed. ¾ IP Address - Enter the IP a[...]
-
Page 95
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 87 Figure 5-16 W AN – Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. ¾ IP Address - The IP address assigned by your ISP dynamically. ¾ Subnet Mask - The subnet mask assigned by your ISP[...]
-
Page 96
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 88 ) Note: If you get Address not found error when you access a W eb site, it is likely that your DNS servers are set up improperly. You should contact y our ISP to get DNS server addresses. ¾ Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the bro adcast appl[...]
-
Page 97
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 89 Figure 5-18 W AN – PPPoE/Russia PPPoE ¾ PPPoE Connection z User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Secondary Connection - It's available only for PPPoE Connec tion. If your ISP provides an extra Connect[...]
-
Page 98
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 90 ) Note: Sometimes the connection cannot be disconnec ted although you s pecify a time to Max Idle Time (0~99 mins) because some applicat ions visit the Internet cont inually in the background. z Connect Automatically - Connect automatically after the Device is disconnected. To use [...]
-
Page 99
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 91 Figure 5-19 PPPoE Advanced Settings z MTU Size - The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP. z Service Name/AC Name - They sh[...]
-
Page 100
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 92 4. If your ISP provides L2 TP connection, please select L2TP/Russia L2TP option. Then yo u should enter the following parameters in Figure 5-20 . Figure 5-20 W A N – L2TP/Russia L2TP ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are c[...]
-
Page 101
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 93 ¾ Connect Manually - You can configure the Device to ma ke it connect or disconnect manually. After a specified peri od of inactivity ( Max Idle Time ), the Device will disconnect from your Internet connection, and you will not be abl e to re-establish your connecti on automatical[...]
-
Page 102
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 94 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. z If you choose static IP and enter the dom ain[...]
-
Page 103
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 95 Figure 5-22 W AN – BigPond Cable ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating serv er IP address or host name. ¾ Auth Domain - Type in the domain suffix server name based[...]
-
Page 104
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 96 ¾ Connect Manually - You can click the Connect / Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand mode. The Internet connection can be disconnected automatically after a specified inactivity period and re-[...]
-
Page 105
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 97 5.7 Wireless Figure 5-24 Wireless menu in AP Router Mode In AP Router mode, there are seven s ubmenus under the Wireless menu (shown in Figu re 5-24 ): Wireless Settings , Wireless Security , Wireless MAC Filtering , Wireless Advanced , Distance Setting , Throughput Monitor and Wir[...]
-
Page 106
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 98 ) Note: There are differences between the Wireless Setti ngs page in AP Router mode an d that in AP Client Router mode, as shown in Figure 5-26 & Figure 5-27 . 1. Wireless settings in AP Router mode Figure 5-26 Wireless Settings in AP Router mode ¾ Wireless Radio - Enable or d[...]
-
Page 107
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 99 ¾ Disable Security - The wireless security function can be enabled or disabl ed. If disabled, the wireless stations will be able to connect the De vice without encryption. It is recommended strongly that you choose one of the following options to enable security. ¾ WPA-PSK/WPA2-P[...]
-
Page 108
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 100 the Device in a region other than one of those specified in this fil ed. If your country o r region is not listed, please contac t your local government agency for assistance. ¾ Search - Click this button, you can search t he AP which runs in the current channel. ¾ Key type - Th[...]
-
Page 109
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 101 Figure 5-28 AP List[...]
-
Page 110
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 102 Figure 5-29 ) Note: If you know the SSID of the desired AP, you can also input it to the field "SSID" manually. Be sure to click the Save button to save your settings on this page. ) Note: The operating distance or range of your wireless connection vari es significantly [...]
-
Page 111
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 103 5.7.2 Wireless Security Choose menu “ Wireless > Wireless Security ”, and then you can confi gure the security settings of your wireless network. There are three wireless security modes supported by the Device: WEP (Wired Equivalent Privacy), WPA / WPA2 (Wi-Fi Protected Acc[...]
-
Page 112
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 104 ¾ WEP - Select 802.11 WEP security. ¾ WPA-PSK - Select WPA based on pr e-shared passphrase. ¾ WPA - Select WPA based on Radius Server. Each security option has its ow n settings as described follows: ¾ WEP z Typ e - You can select one of following types: Automatic - Select Sha[...]
-
Page 113
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 105 WPA - Wi-Fi Protected Access. WPA2 - WPA version 2. z Encryption - You can select either Automatic , or TKIP or AES . z Radius Server IP - Enter the IP address of the Radius Server. z Radius Port - Enter the port that radius service uses. z Radius Password - Enter the password for[...]
-
Page 114
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 106 Figure 5-31 Wireless MAC Filtering ¾ To filter wireless user s by MAC Address, cl ick Enable . The default setting is Disable . z MAC Address - The wireless station's MAC address that you want to filter. z Description - A simple description of the wireless station. z Status [...]
-
Page 115
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 107 3. Select Enabled or Disabled for this entry on the Status pull-down list. 4. Click the Save button to save this entry. ¾ T o modif y or delete an existing entry: 1. Click the Modify in the entry you want to modify. If y ou want to delete the entry, click the Delete . 2. Modify t[...]
-
Page 116
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 108 Figure 5-33 5.7.4 Wireless Advanced Choose menu “ Wireless > Wireless Advanced ”, and then you can conf igure the advanced settings of your wireless network. Figure 5-34 Wireless Advanced ¾ Antenna Settings - The polarization of an antenna. You can select Vertical Antenna,[...]
-
Page 117
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 109 ¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, t he Device will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346. ¾ F[...]
-
Page 118
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 110 ¾ Remote RSSI - Remote AP's signal strength value. ¾ Signal Percent - The ratio of RSSI to RSSI RANGE in percentage. ¾ RSSI RANGE - You can drag the Slider to set or input the RSSI RANGE value. ) Note: It only works after you have established c onnection to remote AP in cl[...]
-
Page 119
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 111 Figure 5-37 Throughput Monitor ¾ Rate - The Throughput unit. ¾ Run Time - How long this function is running. ¾ Transmit - Wireless transmit rate information. ¾ Receive - Wireless receive rate information. Click the Start button to start wireless throughput monitor. Click the S[...]
-
Page 120
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 112 Figure 5-38 Wireless S tatistics ¾ MAC Address - the connected wireless station's MAC address. ¾ Current Status - the connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / W PA / WPA-PSK / WPA2 / WPA2 -PSK / AP -UP / AP-DOWN / Disconne[...]
-
Page 121
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 113 5.8.1 DHCP Settings Choose menu “ DHCP > DHCP Settings ”, and then you can configure the DHCP Ser ver on the page as shown in Figure 5-40 . The Device is set up by default as a DHCP server. Figure 5-40 DHCP Settings ¾ DHCP Server - Enable or Disable the server. If you disa[...]
-
Page 122
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 114 ) Note: To use the DHCP server function of the device, you s hould configure all computers in the LAN as " Obtain an IP Address automatically " mode. This function will ta ke effect until the device reboots. 5.8.2 DHCP Clients List Choose menu “ DHCP > DHCP Clients [...]
-
Page 123
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 115 Figure 5-42 Address Reservation When you specify a reserved IP addr ess for a PC on the LAN, the PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings. ¾ MA[...]
-
Page 124
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 116 ¾ To modify a Reserved IP Address, you can follow these steps: 1. Select the reserved addr ess entry as you desired, Modify it. If you wish to delete the entry, click the Delete link of the entry. 2. Click the Save button. Click the Add New... button to add a new Address Reservat[...]
-
Page 125
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 117 Figure 5-45 Virtual Servers ¾ Service Port - The numbers of External Ports. You c an enter a service p ort or a range of service ports (the format is XXX - YYY, XXX is Start port, YYY i s End port). ¾ IP Address - The IP address of the PC running the service application. ¾ Prot[...]
-
Page 126
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 118 Figure 5-46 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one ty pe of available service, please select another service, and enter the same IP Addr ess for that computer or server . ¾ To modify or delete an existing entry: 1. Click the Modi[...]
-
Page 127
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 119 Figure 5-47 Port T riggering ¾ Once configured, operation is as follows : 1. A local host makes an outgoing connection to an external host using a destination port number defined in the Trigger Port field. 2. The Device records this connection, opens t he incoming port or ports a[...]
-
Page 128
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 120 ¾ To add a new rule do the follo w ing on the Port Triggering screen : 1. Click the Add New... button. 2. Enter a port number used by the application to send an outgoing request in the Trigger Port box. 3. Select the prot ocol used for the Trigger Port from the pull-down list of [...]
-
Page 129
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 121 Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return to the previous page. ) Note: 1. When the trigger connecti on is released, the correspondi ng opened ports will be closed. 2. Each rule can only [...]
-
Page 130
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 122 5.9.4 UPnP Choose menu “ Forwarding > UPnP ”, and then you can view the information about UPnP (Universal Plug and Play) in the screen as shown in Figure 5-50 . The UPnP feature allows the dev ices, such as Internet computers, to access the local host resources or devices a[...]
-
Page 131
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 123 5.10 Security Figure 5-51 The Security menu There are four submenus under t he Security menu as shown in Figure 5-51 : B asic Security , Advanced Security , Local Management and Remote Management . Click any of them, and you will be able to configure t he corresponding function. 5[...]
-
Page 132
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 124 to the protocol. SPI Firewall is enabled by fa ctory default. If you want all the computers on the LAN exposed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if y ou want to allow VPN tunnels using VPN protocols to pass through the Device. z PPT[...]
-
Page 133
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 125 Figure 5-53 Advanced Security ) Note: FLOOD Filtering will take effect only when the T r affic St atistics in System T ools is enabled. ¾ Packets Statistics interval (5~60) - The default value is 10. Sele ct a value between 5 and 60 seconds in the pull-down list. T he Packets Sta[...]
-
Page 134
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 126 ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The defaul t value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyon d the set value, the Dev[...]
-
Page 135
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 127 use the password to browse the built-in web pages to perform Administrator tasks and all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the Control List above. Click the Save button to save your settings. ) Note: If your PC is [...]
-
Page 136
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 128 After successfully entering t he password, you will be able to access the Devi ce's web-based utility. ) Note: Be sure to change the Device's default password to a secure password. 5.11 Parent al Control Choose menu “ Parental Control ”, and then you can configure t [...]
-
Page 137
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 129 ¾ For example : If you desire that the children’s PC with MAC address 00-11-22-33-44-AA can access www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is without any restricti on, you should follow the settings below: 1. Click Parental Control[...]
-
Page 138
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 130 5.12 Access Control Figure 5-58 Access Control There are four submenus under the A ccess Control menu as shown in Figure 5-58 : Rule , Host , Ta r g e t and Schedule . Click any of them, and you will be able to configure the corresponding function. The Device, providing convenient[...]
-
Page 139
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 131 ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, and then the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique. ¾ Host - Here displays the host selected in the [...]
-
Page 140
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 132 4) In Schedule field, select Schedule_1. 5) In Action field, select Allow. 6) In Status field, select Enable. 7) Click Save to complete the settings. 6. Then you will go back to the Access C ontrol Rule Management page and see the following list. Figure 5-60 Access Control List Cl[...]
-
Page 141
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 133 ¾ Modify - To modify or delete an existing entry. ¾ For example : If you desire to restrict the Inter net activities of host with MAC address 00-11-22-33-44-AA, you should follow the settings below: 1. Click Add New... button to enter the Add or Modify a Host Entry p age. 2. In [...]
-
Page 142
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 134 ¾ Target Description - Here displays the description about the target and this description is unique . ¾ Information - The target can be IP address, port, or domain name. ¾ Modify - To modify or delete an existing entry. ¾ For example : If you desire to restrict the Inter net [...]
-
Page 143
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 135 Figure 5-65 Schedule Settings ¾ Schedule Description - Here displays the description of the schedule and this description is unique . ¾ Day - Here displays the day(s) in a week. ¾ Time - Here displays the time period in a day. ¾ Modify - Here you can edit or delete an existing[...]
-
Page 144
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 136 Click the Add New... button to add a new target ent ry. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page. Click the Previous button return to the previous page. 5.13 S t atic Routing Figure 5-67 S tatic Routing There [...]
-
Page 145
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 137 3. Select the Enabled in the Status pull-down list. 4. Click the Save button to save the changes. ¾ To modify or delete an existing entry : 1. Find the desired entry in the table. 2. Click Modify or Delete as desired on the Modify column. Click the Enable All button to enable all[...]
-
Page 146
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 138 ¾ Enable Bandwidth Control - If enabled, the Bandwidth Control rules will take effect. ¾ Egress Bandwidth - The upload spee d through the WAN port. ¾ Ingress Bandwidth - The downloa d speed through the WAN port. 5.14.2 Rules List Choose menu “ Bandwidth Control > Rules Lis[...]
-
Page 147
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 139 There are two submenus under the IP &MAC Binding menu (shown in Figure 5-72 ): Binding Settings and ARP List . Click either of them, and you w ill be able to view or configure the corresponding function. The det ailed explanations for each submenu are provided below. 5.15.1 Bi[...]
-
Page 148
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 140 5.15.2 ARP List Choose menu “ IP&MAC Binding > ARP List ”, and then you can view an d configure the ARP List in the screen below shown in Figure 5-74 . Figure 5-74 ARP List ¾ MAC Address - The MAC address of a controll ed computer in the LAN. ¾ IP Address - The assign[...]
-
Page 149
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 141 need to sign up for DDNS service providers such as www.comexe.cn , www.dyndns.org , or www.no-ip.com . The Dynamic DNS client service provid er will give you a password or key. 1. If the dynamic DNS Service Provider you select is www.comexe.cn , the page will appear as shown in Fi[...]
-
Page 150
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 142 2. If the dynamic DNS Service Provider you select is www.dyndns.org , the page will appear as shown in Figure 5-76 . Figure 5-76 Dyndns.org DDNS Settings ¾ To set up for DDNS, follow these instructions: 1) Enter the User Name for your DDNS account. 2) Enter the Password for your [...]
-
Page 151
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 143 Figure 5-77 No-ip.com DDNS Settings ¾ To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you recei ved from dynamic DNS service provider. 4. Click the Login button to l[...]
-
Page 152
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 144 5.17 System T ools Figure 5-78 The System T ools menu There are nine submenus under the S ystem Tools main menu (as shown in Figure 5-78 ): Time Settings , Diagnostic , Firmw are Upgrade , Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click a[...]
-
Page 153
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 145 3. Enter the Time in Hour/Minute/Second format. 4. Click Save . ¾ For automatic time synchronization: 1. Enter the address of the NTP Server Prior . 2. Click the Get GMT button to get GMT from the Internet. ) Note: 1. This setting will be used for some time-bas ed functions such [...]
-
Page 154
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 146 Figure 5-80 Diagnostic T ools ¾ Diagnostic Tool - Click the radio button to select one diagnostic tool: z Ping - This diagnostic tool troubleshoots connec tivity, reachability, and name resolution to a given host or gateway. z Traceroute - This diagnostic tool tests t he performa[...]
-
Page 155
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 147 ¾ Traceroute Max TTL - Set the maximum number of hops (m ax TTL to be reached) in the path to search for the target (des tination). The default is 20. Click the Start button to start the diagnostic procedure. The Diagnostic Results page (as shown in Figure 5-81 ) displays the res[...]
-
Page 156
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 148 2. Enter or select the path name where you save the download ed file on the computer into the File Name blank. 3. Click the Upgrade button. 4. The Device will reboot while the upgrading has be en finished. ¾ Firmware Version - Displays the current firmware version. ¾ Hardware Ve[...]
-
Page 157
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 149 5.17.5 Backup & Restore Choose menu “ System Tools > Backup & Restore ”, and then you can save the current configuration of the Device as a backup file and restore the conf iguration via a backup file as shown in Figure 5-84 . Figure 5-84 Backup & Restore Click [...]
-
Page 158
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 150 z Change the LAN IP Address (system will reboot automatically). z Change the DHCP Settings. z Change the Wireless configurations. z Change the Web Management Port. z Upgrade the firmware of the Device (system will reboot automatically.). z Restore the Device's settings to the[...]
-
Page 159
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 151 5.17.8 System log Choose menu “ System Tools > System Log ”, and then you can view the logs of the Device. Figure 5-87 System Log ¾ Auto Mail Feature - Indicates whether auto mail feature is enabled or not. ¾ Mail Settings - Set the receiving and sending mailbox address, [...]
-
Page 160
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 152 Figure 5-88 Mail Account Settings ¾ From - Your mail box address. ¾ To - Recipient's address. ¾ SMTP Server - Your SMTP server. ¾ Authentication - Most SMTP Server requires Authentication. ) Note: Only when you select Authentication , do you have to enter the User Nam e a[...]
-
Page 161
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 153 ¾ Save Log - Click to save all the logs i n a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon. ¾ Clear Log - All the logs will be dele[...]
-
Page 162
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 154 Click the Refresh button to refresh the page. Click the Reset All button to reset the values of all entries to zero. Click the Delete All button to delete all entries in the table. Statistics Table Figure 5-90 S tatistics T able ¾ IP Address/MAC Address - The IP Address and MAC a[...]
-
Page 163
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 155 Appendix A: FAQ 1. How do I configure the Device to access the Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from yo ur ADSL Modem to the WAN port on the Device. The telephone cord plugs into the Line p[...]
-
Page 164
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 156 2. How do I configure the Device to access the Internet by Ethernet users? 1) Login to the Device, click the “Network” m enu on the left of your browser, and click "WAN" submenu. On the WAN page, sele ct “Dynamic IP” for "WAN Connection Type", finish by[...]
-
Page 165
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 157 Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. 4) How to enable DMZ Host: Login to the Device, click the “Forwarding” menu on the left of your browser, and click "DMZ" s[...]
-
Page 166
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 158 Figure A-7 Remote Management ) Note: If the above configuration takes effect, to configure to th e Device by typing http://192.168.1.254:88/ (the Device’s LAN IP address: Web Management Port) in the address field of the Web browser. 3) Login to the Device, click the “Forwardin[...]
-
Page 167
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 159 5. Wh y is it that the wireless stations cannot connect to the Device? 1) Make sure the "Wireless Router Radio" is enabled. 2) Make sure that the wireless stations' SSID accord with the Device's SSID. 3) Make sure the wireless stations have t he right KEY for e[...]
-
Page 168
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 160 Appendix B: Factory Defaults Item Default Value Common Default Settings Username admin Password admin IP Address 192.168.1.254 Subnet Mask 255.255.255.0 Wireless SSID TP-LINK_XXXXXX Wireless Security Disable Wireless MAC Address Filtering Disable DHCP DHCP Server Disable Start IP [...]
-
Page 169
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 161 Appendix C: Specifications General Standards and Protocols IEEE 802.11a, IEEE 802. 11n, IEEE 802.3, IEEE 802.3u, IEEE 802.1x, IEEE 802.3x, IEEE 802.11i, IEEE 802.11e Safety & Emission FCC, CE Ports One 10/100M Auto-Negotiation LAN RJ45 port, supporting pa ssive MDI/MDIX LEDs P[...]
-
Page 170
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 162 Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802. 11 standar ds by adding MIM O (multiple-i nput multiple-out put). MIMO uses multi ple tran smitter and r eceiver ante nnas to allow for increased data thr oughput via spatia l multiplexin g and increa sed range by[...]
-
Page 171
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 163 ¾ WEP ( W ired E quivalent P rivacy) - A data privacy mechanism bas ed on a 64-bit or 128-bit or 152-bit shared key algorithm, as des cribed in the IEEE 802.11 standard. ¾ Wi-Fi - is a trademark of the Wi-Fi Alliance, founde d in 1999 as Wireless Internet Compatibility Alliance [...]