Trane CNT-SVX07C-EN manual

CNT -S VX07C-EN Installation and Oper ation T r acer ™ ZN521 Zone Contr oller[...]

[...]

Installation and Oper ation T r acer ™ ZN521 Zone Contr oller CNT -SVX07C-EN Apr il 20 05[...]

CNT -S VX07C-EN[...]

CNT -SVX07C-EN T racer ZN521 Zon e Controller Installation and Operation This guide and th e information in it are the property of America n Standard Inc. and m ay not be used or reproduced in w hole or i n p art, without the written permission of American Standard Inc. Trane , a business of American Standard, Inc., has a policy of continuo us prod[...]

CNT -S VX07C-EN NO TICE: W arn ings an d Caution s appea r at appr opriate sectio ns th roughou t this manual. Read th ese carefully:  W ARNING Indicate s a potentially hazar dous situation, which, if not a voided, could r esult in death or ser ious injury .  CA UTION Indicate s a pot e ntially haza rdous sit uation, which, if not av oided, m[...]

CNT -SVX07C-EN i Cont ents C ha p t e r 1 Overview a nd sp ecificat ions . . . . . . . . . . . . . . . . . . 1 Product de scription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Storage environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Dimensions . . . . . . . . .[...]

Conte nt s ii CNT -S VX07C-EN Analog inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 GND: Ground terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ZN: Zone tempera ture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SET : Local setpoin[...]

Contents CNT -SVX07C-EN iii Modulating outdoor/return air dampers . . . . . . . . . . . . . . . . . . . . . . . . . 43 ASHRAE Cycle 1 conforma nce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 ASHRAE Cycle 2 conforma nce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Economizing (free cooling) . . . . . . . . . . . . . [...]

Conte nt s iv CNT -S VX07C-EN C ha p t e r 7 T r ou bleshooti ng . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Inde x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69[...]

CNT -SVX07C-EN 1 Chapt e r 1 Ov erview and specifications This guid e provides i nstallation an d configuratio n information f or the Trac er ZN521 zone co ntrolle r , as wel l as a desc riptio n of its ope ratio ns. The overvi ew includes a pro duct description, sp ecifications , and descrip- tions of ancillary products that may be necessary . Pr [...]

Chapter 1 Overview and specific ations 2 CNT -S VX07C-EN St or age en vir onment If a Tracer ZN521 zone co ntroller is to be s tored for a su bstantial amo unt of tim e, store it in an indo or envi ronment that me ets th e follow ing requirements: • T emperature: –40° to 185°F (–40° to 85°C ) • Relative humidity: 5–95%, noncon densing[...]

Clearan ces CNT -SVX07C-EN 3 Figur e 1 . Plas t ic- cove r model dimensions and clear a nce s Figur e 2. Metal-co ver model dime nsions and clearance s 4 in. (1 02 mm) 5.625 in ( 1 43 mm) 1 in (25 mm) 6.87 5 in (1 75 mm) 1 in (25 mm) 4 in (1 02 mm) 4 in (1 02 mm) 6.31 (1 60 mm) 2 in. (5 1 mm) 5.62 5 in. (1 43 mm) 9 in. (229 mm) 2.25in. (58 mm) 1 in[...]

Chapter 1 Overview and specific ations 4 CNT -S VX07C-EN A g ency l isting/compliance CE—Immunity: EN 50082-1:1997; EN 50082-2:1 995 CE—Emiss ions: EN 500 81-1:1992 (C ISPR 22) Clas s B UL and C-UL 916 l i ste d: Energy management system UL 94-5V (UL flammability rati ng for plenum use ) FCC P a rt 15, Class A ASHRAE Cycle 1 & Cycle 2 contr[...]

Additional components CNT -SVX07C-EN 5 returns the valve to normall y open or clos ed (dependent on th e desired default po sition). F o r modula ting valve control , use tri-state modul ating actuators w ith or with out a spring return, as requ ired by the ap plication. D amper actuators Damper ac tuators canno t exceed 12 V A draw at 24 V a c . F[...]

Chapter 1 Overview and specific ations 6 CNT -S VX07C-EN[...]

CNT -SVX07C-EN 7 Chapt e r 2 Gener al wir ing inf or mation This chapte r provides sp ecifications and general in formation about w ir- ing the Tracer ZN521 zone controller . The controller requires wiring for: • Inpu t/output t erminals • AC power to the controller • Communication-link wiring , if the cont roller is to communicate with a bui[...]

Chapter 2 General wir i ng infor mation 8 CNT -S VX07C-EN CAUTION Complet e input/output wir ing bef ore a pply ing po wer t o the T racer ZN521 zone con tr o ller . F ailure to do so may cau se damage to the con- tro ller or powe r transf or mer due to inadve rtent connections to po wer circuits . IMP OR T ANT Do not sh ar e 24 V ac between c ontr[...]

Communication-link wiring a nd addressing CNT -SVX07C-EN 9 Commun ication-lin k wir ing an d addr e ssing The T racer ZN5 21 zone co ntroller communica tes wi th the BAS an d with other LonT alk controllers by means of a LonT alk communication link. IMP OR T ANT F or important instr uctions on networ k wiring, r efer t o the Tr a c e r S u m - mi t[...]

Chapter 2 General wir i ng infor mation 10 CNT -S VX07C-EN[...]

CNT -SVX07C-EN 11 Chapt e r 3 Mounting the contr oller This chapter gives recommendat i ons and requiremen ts for mounting a Tracer ZN521 zone control l er . Location r eco mm endation s Trane recommends locating the Tracer ZN5 21 zone controller: • Near the contro l led piec e of equipment to reduce wiring costs • Where it is easily accessible[...]

Chapt er 3 Mounting the con troller 12 CNT -S VX07C-EN Mounting r ecommendations Mounting recomme ndations are as follows: CAUTION Mount the T r acer ZN521 z one controller with the co ver on t o av oid the possibility of damaging the circuit board dur ing installation. • Moun t the con troller in any position , other t han wi th the fr ont of th[...]

CNT -SVX07C-EN 13 Chapt e r 4 Input/output functions and wir ing f or typical applications This chap ter provide s informatio n about the f unction o f inputs an d out- puts and examp l es of wiring for typical applicati ons. Applicat ions sup- ported b y the Tracer Z N521 zone contro ller are sh own in T able 2. Figures 7 through 17 (pages 23 thro[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 14 CNT -S VX07C-EN Binary inpu ts The Tracer ZN521 cont roller includes four binary inputs . Each binary input a ssociates an in put signal o f 0 V a c with open contacts and 24 V ac with clos ed contacts . Y ou can use the Rover se rvice tool to confi gure each of th e input s[...]

Binary inputs CNT -SVX07C-EN 15 BI3: Occupancy or gener ic binary inpu t The BI3 binary input can function as either: • The o ccupa ncy i nput • A generic binary input The functi on of occupancy is to sa ve energy by spre ading zone setp oints when the zone is unoccupied . As the occupancy input, BI3 can be used for two related functions . F or[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 16 CNT -S VX07C-EN Analog inputs The Tr acer ZN521 con troller includes seven anal og inputs. T able 4 describes thei r functions . Each function is explained in the following para graphs . F or an explan ation of the diag nostics gener ated by e ach ana- log input, see “Diag[...]

Analog inputs CNT -SVX07C-EN 17 SET : Local setpoint The SET anal og input functions as the local (hard-wire d) temperature setpoin t input for ap plications u tilizing a Trane zone senso r with a tem- perature setpoint t humbwheel. T he local setp oint input i s configura ble (as ena bled or disable d) using the Rov er service tool. A setpoint val[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 18 CNT -SVX07C-EN F or units not configured as cha ngeover units , the entering wat er temper- ature va lue is used for i nformation and t roubleshooti ng only and doe s not affect t he operation of th e controller . AI2: Dischar g e air t emperatur e The AI2 ana log input func[...]

Analog inputs CNT -SVX07C-EN 19 Economi zing ( free cooling ) is a f unction whereby o utdoor air is used as a source of co oling before hyd ronic or DX cool ing is used. The T racer ZN521 uses the o utdoor air temperature val ue to determine whe ther economiz- ing is f easible. Economizing is not possible without a v alid outdoo r air temperature [...]

Chapt er 4 Input/output func tions and wir ing for typical applications 20 CNT -SVX07C-EN is estab lished and then is no lo nger present, the controller g enerates a Generic AIP F ailure diagnostic. Fo r t h e C O 2 measurement configuration, a 4–20 mA sensor must be hard- wire d to the AI4 termi nal as sh own in Fi gure 5. T he senso r will tr a[...]

Binary outputs CNT -SVX07C-EN 21 Binary ou tputs The ZN521 zo ne controller supp orts fan coil, b lower coil, and unit ventila- tor applica tions that ma y include the following compo nents: • Suppl y fan with up to three sp eeds • Hydroni c cooling an d/or heati ng coils wit h two-posi tion or tri- state modulating co ntrol valve • DX coolin[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 22 CNT -SVX07C-EN Over r iding binary outpu ts The Tracer ZN521 control ler includes a manual output test and a w ater valve overri de feature. Use the manual output test to manua lly control the outputs i n a defined sequence . F or information , see “Manual output test” o[...]

Wiring requirements and optio ns CNT -SVX07C-EN 23 Figur e 7 . T w o-pipe hy dronic-cooling unit Lon T a lk in Ente ring water temper ature Outdoor a ir or generi c temperature 24 V † Exha ust (or fan, mediu m speed) 24 V † Fan, low speed 24 V † Cooling va lve 24 V † Fa n, high speed Low -coil- temperature detect ion (clo sed=no rmal)* Cond[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 24 CNT -SVX07C-EN Figur e 8. T wo-pipe hy dronic-he a ting unit in Enteri ng water tempera t u re Outdoor a ir or gene ric tempe rat ur e 24 V † Exhau st (or f an, medi um spee d) 24 V † Fan, low speed 24 V † Fan, high speed Condensa te ov erfl o w (closed=normal )* Occup[...]

Wiring requirements and optio ns CNT -SVX07C-EN 25 Figur e 9. T wo-pipe h ydr onic heating/cooling unit wit h auto c hangeo ver LonT alk Enter ing w ater temp erat ure Outdoor air or generi c temperature 24 V † Exhaus t (or fan, medium speed) 24 V † Fan, low speed 24 V † Fan, high speed Low -coil- temperature detect ion (clo sed=no rmal)* Con[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 26 CNT -SVX07C-EN Figur e 1 0. F our -pipe hy dronic heating/cooling unit Lon T a lk in Enteri ng w ater temp erat ure Outdoor a ir or generi c temperature 24 V † Exhaus t (or fan, medium speed) 24 V † Fan, low speed 24 V † Fa n, high speed Low -coil-t emperature detectio[...]

Wiring requirements and optio ns CNT -SVX07C-EN 27 Figur e 1 1 . Four -pipe heating/cooling unit with aut o chang eover LonT alk in Outdoor a ir or generi c temperature 24 V † Exhaus t (or fan, medi um speed) 24 V † Fa n, lo w speed 24 V † Fan, high speed Lo w -coil- temper atur e detecti on (closed=no rmal)* Condensate ov erflow (closed =nor[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 28 CNT -SVX07C-EN Figur e 12. T wo-pipe heating unit with DX cooling LED A B B A AI4 +20 GND AI2 AI3 FA N GND AI1 ZN GND LED SET PIN ZONE SENSOR SERVICE ANALOG INPUTS COMM5 COMM5 AC POWER 24V 24V GND 24V BINARY INPUTS BI3 BI1 BI2 BI4 BINARY OUTPUTS 2 1 4 3 7 6 5 8 9 LED ST A TU[...]

Wiring requirements and optio ns CNT -SVX07C-EN 29 Figur e 13. Electr ic heat unit with DX cooling LED A B B A AI4 +20 GND AI2 AI3 FA N GND AI1 ZN GND LED SET PIN ZONE SENSOR SERVICE ANALOG INPUTS COMM5 COMM5 AC POWER 24V 24V GND 24V BINARY INPUTS BI3 BI1 BI2 BI4 BINARY OUTPUTS 2 1 4 3 7 6 5 8 9 LED ST A TUS 10 5 4 3 2 1 On Cancel 6 } LonT alk in E[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 30 CNT -SVX07C-EN Figur e 14. Electr ic heat unit LonT alk in Enteri ng water temperature Outdoor air or generi c temperature 24 V † Exhau st 24 V † Fan, high speed Low -coil- temperature detect ion (cl osed=no rmal)* Condens ate ov er flow (closed=norm al)* Occupancy (o pe[...]

Wiring requirements and optio ns CNT -SVX07C-EN 31 Figur e 15. T wo-pipe heating unit with f ace-and-b ypass damper LonT alk in Enteri ng w ater temp erat ure Outdoor air or generi c temperature 24 V † Exhaus t (or fan, medium speed) 24 V † Fa n, lo w speed 24 V † Fan, high sp eed Low -coil- temperature det ection (cl osed=no rmal)* Cond ensa[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 32 CNT -SVX07C-EN Figur e 16. T wo-pipe heating/cooling unit with face -and-bypass damper LonT alk in Enteri ng water temper ature Outdoor air or generi c temperature 24 V † Exha ust (or fan, mediu m speed) 24 V † Fa n, lo w speed 24 V † Fa n, high speed Lo w-coil-t emper[...]

Wiring requirements and optio ns CNT -SVX07C-EN 33 Figur e 17 . Four -pipe h e atin g/cooling unit wit h f ace-and- bypass damper LonT alk in Enteri ng water tem perat ure Outdoor ai r or generic tempera t ure 24 V † Exha ust (or fan, mediu m speed) 24 V † Fan, low speed 24 V † Fa n, high speed Low -coi l-temperature det ection (clo sed=no rm[...]

Chapt er 4 Input/output func tions and wir ing for typical applications 34 CNT -SVX07C-EN[...]

CNT -SVX07C-EN 35 Chapt e r 5 Sequence of oper ations The Trace r ZN521 zone controlle r will operate to maintain th e zone tem- pera ture setpoi nt. This chapter discusse s many of the op erationa l sequences used by the controlle r to accomplish this goal. P ow er -up sequen ce When 24 V ac po wer is initially applied to t he Tracer ZN521 zone co[...]

Chapt er 5 Sequence of oper ations 36 CNT -SVX07C-EN Occupanc y modes Occupancy modes can be controlled by any of the follow i ng: • The state of the local (hard-wired) occupancy binary input BI3 (see “BI3: Occupancy or generic binary input” on page 15) • A timed ove rride request fro m a Trane zone s ensor (see “Timed over- ride control?[...]

Timed over ride control CNT -SVX07C-EN 37 The fan will run as confi gured (continuous or cycling ) for occupied mode. The control ler alwa ys uses the stored de fault setpoi nt values (config- urable usi ng the Rover servic e tool), regardless of hard-wired or commu- nicated se tpoint values . In add ition, the outdoo r air damper uses the Economi [...]

Chapt er 5 Sequence of oper ations 38 CNT -SVX07C-EN Zone temper a t ur e cont r o l The Tracer ZN 5 21 zone con troller uses two methods of zone tempera ture control: • Cascade zone cont rol—used in th e occupied, occupied b ypass, and occupied sta ndby modes • Simplified zone co nt rol—us ed in the unoccupied mode Cascade zone contr ol Ca[...]

Disc har ge air t emperi ng CNT -SVX07C-EN 39 Disc har ge air t emper ing If the cont roller is i n cooling mode , cascade zone control initiates a dis- charge air tem pering f unction when t he disch arge ai r temper ature falls below the Discharge Air Control P oin t L ow Limit (configu rable using the Rover service tool) and all cooling capacity[...]

Chapt er 5 Sequence of oper ations 40 CNT -SVX07C-EN In heating and cooling mode, the control ler maintain s the zone tempera- ture based o n the active he ating setpoi nt and the active cool ing setpoint, respec tively . The active hea ting and coolin g setpoints are determined by the occupan cy mode of the controller . F or two-pipe and four -pip[...]

Exhaust cont rol CNT -SVX07C-EN 41 fan configur ation. The co ntroller can be conf igured to auto, to a sp ecific fan speed, or t o off . If both a communicated and hard-wired valu e (fan- speed swi tch) is present, t he communicated value ha s priority . When the controller rece ives a communi cated aut o signal (or the associ- ated f an-speed s w[...]

Chapt er 5 Sequence of oper ations 42 CNT -SVX07C-EN • The exhau st output is de-e nergized if the outdoor air dampe r position drops 10% below the Exha ust F an/Da mper Ena ble Setpoint. • If the Exhaust F an/Damper Enable Setpoint is les s than 10%, the exhaust output is energize d if the outdoor ai r damper position i s at the setp oint and [...]

Modulating outdoor /return air dampers CNT -SVX07C-EN 43 T wo-position v alve operation The T racer ZN5 21 supp orts tw o-posit ion va lves with a single binary out- put for each va lve. Contro llers used for two-pipe a pplications support heating, cooling, or heat /cool changeover with a sing le valve/coi l. Control- ler used for four -pipe applic[...]

Chapt er 5 Sequence of oper ations 44 CNT -SVX07C-EN low-spee d fan operatio n. A controlle r can also receive a BAS-communi- cated outdoor air damper minimum position. A BAS-communi cated minimum position setpoin t has priority over all locally conf igured setpoint s . When a communicated minimum position setpoint is n ot p resent, the contro ller[...]

Modulating outdoor /return air dampers CNT -SVX07C-EN 45 ASHRAE Cy cle 1 confor mance Tracer ZN521 applicati ons with an outside air damper support ASH RAE Cycle 1 confo rmance. ASHR AE Cycle 1 operati on admits 100% outdoo r air at all times except during a warm-up cyc le. A tri-state modulating damper actu ator is req uired for this operation . F[...]

Chapt er 5 Sequence of oper ations 46 CNT -SVX07C-EN T w o-position contr ol of a modulating outdoor ai r damper The Tracer ZN 521 does not suppo rt a two-posit ion outdoor air da mper actu ator . However , a modulatin g outdoor/retu rn air damper actuat or can be used for two-pos ition control. Two-position control can be accomplis hed by not pr o[...]

Electric heat operation CNT -SVX07C-EN 47 Electr ic heat oper ation The Tracer ZN 521 supports both singl e-stage and two- stage electr ic heat. Electri c h eat is cycled on and o ff to maintain the dis charge air tempera- ture at the activ e heating setpoint. T wo-pipe changeove r units w ith elec- tric hea t use the electri c h eat only when hot [...]

Chapt er 5 Sequence of oper ations 48 CNT -SVX07C-EN P e er -t o-peer communication Tracer ZN 521 zone con trollers have the ability to share da ta with o ther LonT alk -based controllers . Multiple controllers ca n be bo und as pee rs , using the R over ser vice to ol, to s hare: • Setpo int • Zone temperature • Heating/ cooling mode • F a[...]

Unit protection strategies CNT -SVX07C-EN 49 Smart r es et The Tr acer ZN521 w ill auto matically restart a unit that is locke d-out as a result of a Low Coil T emp Detection (BI1) diagnostic. Referred to a s “smart reset,” this autom atic rest art will o ccur 30 m inutes af ter the diag - nostic occurs . If the unit is successf ully resta rted[...]

Chapt er 5 Sequence of oper ations 50 CNT -SVX07C-EN Filter -maintenance timer The filter -maintenance timer tracks the amount of time (in hours) that the fan is en abled. The Maintenance Require d Timer Setpoint (config - urable using the Rover service t ool) is used to s et the amount of time until mainte nance (typical ly , a filter cha nge) is [...]

CNT -SVX07C-EN 51 Chapt e r 6 Stat us indicat ors f or oper ation and communication This chapter describes the operation and communication status indica- tors on the Tracer ZN521 controller , including: • A descripti on of the location and function of th e T est button a nd Ser- vice pin butt on and the light- emittin g diode s (LEDs) located o n[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 52 CNT -SVX07C-EN Manual output test The manual output test se quentially turns on and off all binary outputs to verif y their operatio n. The test override s normal operation of t he con- troller , which is su spended while the test is b eing performe d. Use the man ual output test to[...]

Manual output test CNT -SVX07C-EN 53 T able 1 1 . Manual output t est sequence fo r non-f ace-and-b ypass configur ations St ep Result BOP1 BOP2 BOP3 BOP4 BOP5 BOP6 BOP7 BOP8 BOP9 BOP1 0 Number of times T est butt on is pr essed F an high 1)F an medium 2)Exhaust Fa n l ow 1) Co ol in g/ cha nge over valve, open 2)T wo-position cooling/ changeover v[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 54 CNT -SVX07C-EN 11 : E x i t 5 1 The controller tu rns of f all fan and electri c heat outputs and drives all d ampers and valves closed. 2 The controller attempts to clear all diagnostics. 3 If configured fo r a 3-speed fan, t he medium fan speed output wi ll energize at step 3. If [...]

Manual output test CNT -SVX07C-EN 55 T able 12. Manual output t est sequence f or f ace-and-b ypass configuration s (two-position iso lation v alves only) Step Result BOP1 BOP2 BOP3 BOP4 BOP5 BOP6 BOP7 BOP8 BOP9 B O Number of ti mes T e st butto n is pr essed F an high 1)F an medium 2)Exhaust f an Fan l ow T wo -position cool/ cha nge over valve Fa[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 56 CNT -SVX07C-EN Service pin but ton The Servi ce pin button is locat ed as shown in Figure 19 on page 51. The Servic e pin butt on is us ed to: • Identif y a de vice (see “Identify ing a device” in the Ro ver Installat ion/ Operation/Pro gramming guide (EMTX- SVX01A-EN) • Add[...]

Interp reting LED s CNT -SVX07C-EN 57 The gr een (status) L ED on the Trace r ZN521 controll er (see Figure 19 on page 51) indicates whether the controller has powe r a pplied to it and if the controller is in manual test mode ( see T ab le 14). The yell ow (communication s) LED on the Tracer ZN5 21 controlle r (see Figure 19 on page 51) indicate t[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 58 CNT -SVX07C-EN Diagnostics Diagnosti cs are info rmational messa ges that indi cate the operat ional sta- tus of the controller . In response to m ost diag nostics, the controll er attemp ts to protec t the equipment by enabli ng or disabling , or op ening or closi ng, sp ecific out[...]

Diagnostics CNT -SVX07C-EN 59 Smart r eset diagnostics After the contro l ler detects the first smart reset diagnostic, the unit w aits 30 minutes before init iating the smart reset functi on. If another diagnos- tic of this type occurs again within 24 hours after an aut omatic clearing , you must clea r the diagnostic manually by usi ng any of the[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 60 CNT -SVX07C-EN Space T emperatu r e F ailure Invalid or missing value for z one temperature Fan off Va l v e s closed Outdoor air damper clos ed Fac e and bypass da mper by pa ss DX/elec tric heat of f Baseboard hea t of f Automatic Entering W ater T emp F ailure Inv alid or missing[...]

Diagnostics CNT -SVX07C-EN 61 Generic AIP Failure Inv alid or missing value for generic analog input Fan unaffec t e d Va l v e s unaffec t e d Outdoor air damper unaf f ected Fac e and bypass da mper unaf fected DX cooling/e lectric heat unaf fected Baseboard hea t unaf fected Informational Local Fan Mode Failure Invalid or missing fan- speed swit[...]

Chapt er 6 Status indicat ors for oper ation and communicati on 62 CNT -SVX07C-EN[...]

CNT -SVX07C-EN 63 Chapt e r 7 T r oubleshooting Use T able 17 thro ugh T able 22 to assist you in diag nosin g any of th e fol- lowing operat i ona l problems that you might encounte r with the Tracer ZN521 zone controller: • F an do es not en ergize (T able 17) • V alv es remain clos ed (T able 18 o n page 64) • V alves remain o pen (T able [...]

Chapt er 7 T roubleshooting 64 CNT -SVX07C-EN Cycling fa n operation/ continuous The control ler operates the fa n continuously when in the occupied, o ccupied standby , or occupie d bypass mode. Whe n the controller is in th e unoccupied mode, the fan is cycled between high spe ed and off with capacity . Unoccupie d operation Even if the controlle[...]

T roubleshooting CNT -SVX07C-EN 65 T abl e 19. V alves r em ain open Pr obable cause Explanation Unit wirin g The wiring between the co ntroller outputs and the valve(s) must be present and cor rect for normal valve operation. R efer to applicable wiring diagram. Fai led end device The valves mus t be c hec k ed to ensure proper operation s. Normal[...]

Chapt er 7 T roubleshooting 66 CNT -SVX07C-EN R equested mode of f Y ou can communic ate a desired operati ng mode (suc h as of f, hea t, and cool) to the con- troller . If of f is communicated to the controller , the unit shuts off the c ompressor or elec- tric heat. Fr eeze avo idance When the fa n is off w ith no demand for capacity (0%) and the[...]

T roubleshooting CNT -SVX07C-EN 67 Normal operati on The control ler opens and cl oses the outdoo r air damper based on th e controller’ s occu- pancy mo de and fan status. N ormally , the outdoor a ir damper is open d uring occupied mode whe n the fan is runnin g and closed during unoccupied mod e. (See “Mo dulating outdoor/return a ir dampers[...]

Chapt er 7 T roubleshooting 68 CNT -SVX07C-EN[...]

CNT -SVX07C-EN 39 Index Numer ics 24 V ac wiring, 7 A A C-power wiring, 7 Actuators Damper , 5, 46 V alve, 4 Additional a pplication-depend ent comp onents , 4–5 Addressing LonT alk commun ication, 9 Neuron IDs, 9 Agency lis ting/complianc e, 3 Analog inputs, 16–20 AI1 (Entering w ater temperature), 17 AI2 (Dis c harge air temp erature), 18 AI3[...]

Index 40 CNT -SVX07C-EN Electri c h eat, 1 Fac e-and-bypass dam pers, 1 Outdoor/return air dampers, 1 R over service to ol, 1 T ri-state m odulating dampers, 1 T ri-state m odulating valves , 1 T wo-position valves, 1 Current- sensin g switches, 4 D Dampers Actuators, 5 Exhaust, 41 Fac e-and-bypass, 1, 21, 46 Modulating outdo or/return air , 43, 46[...]

Ind ex CNT -SVX07C-EN 41 Low-coil -temper atur e det ection Diagnostic , 14, 59 Input, 14 M Manual ou tput test, 52 Modulating outdo or/return air dampers, 43 Modulat ing valves Calibration, 42 Oper ation, 4 2 Morning coo l-down, 39 Morning w arm-up, 39 Mounting Cover , 12 Diagram, 12 Locat ion, 11 Operating en vironmen t, 11 Pr ocedures, 12 N Nati[...]

Index 42 CNT -SVX07C-EN Switc hing devices Condensat e overflow , 4, 14 Cur rent sensing, 4 Fan st at us , 4 Fr eeze pr otection, 4, 14 Low-coil -temper atur e, 4 Occupa ncy , 4, 15 T T emperature s ensors T able o f options, 5 W ater and d uct, 4 Zone, 4 T ermin ation re sistor s, 9 T est bu tton, 51– 52 Time cl oc k, 15 Timed over ride control,[...]

[...]

T rane has a policy of continuous product and product data impro vement and reserves the right to c hange design and sp ecifications without notice. Only qualified techni cians should perform the installa- tion and servicing of equipment refer red to in this publication. Literature Order Number CNT -SVX07C -EN File Number SV -ES-BAS-CNT -SVX-0 7C-E[...]