Weed Eater 191064 manual

MODEL NO . WET1742STB 17.0 HP 42 Inc h La wn T ractor 191064 R e v . 1 03.02.04 TR /rad PRINTED IN U .S.A. ® F or P ar ts and Ser vice, contact our authorized distributor: call 1-800-849-1297 F or T echnical Assistance: call 1-800-829-5886[...]

2 • A void star ting or stopping on a slope. If tires lose trac- tion, disengage the blades and proceed slo wly straight down the slope . DO NO T: • Do not turn on slopes unless necessar y , and then, turn slowly and gradually downhill, if possib le. • Do not mow near drop-offs , ditches, or embankments . The mow er could suddenly tur n ov er[...]

3 W ARNING: In order to pre vent ac- ci den tal starting when setting up, trans por t ing, ad just ing or making re- pairs, al ways dis con nect spark plug wire and place wire where it can not contact spark plug. W ARNING: Do not coast down a hill in neutral, you may lose contr ol of the tractor . W ARNING: T ow only the attachments that are rec om[...]

4 T ABLE OF CONTENTS SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUST OMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ................................................................. 6-8 OPERA TION ..................................[...]

5 CONTENTS OF HARD W ARE P A CK Steering Wheel Seat Keys Slope Sheet (1) Oil Drain Tube (1) Bolt (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Lock Washer 1/2 (1) Large Flat Washer (1) Hex Bolt 1/4-28 x 1-1/4 (1) Locknut 1/4-28 (1) Locknut 1/2-20 (2) Keys Steering Wheel Adapter Steering Wheel Insert Steering Boot Steering Extension Shaft[...]

6 ASSEMBL Y T OOLS REQUIRED FOR ASSEMBL Y A sock et wrench set will make assembly easier . Stan dard wrench sizes are listed. (2) 7/16" wrenches Utility knif e (2) 3/4" wrench Tire pres sure gauge Pliers When right or left hand is mentioned in this man ual, it means when you are in the oper ating po si tion (seated be hind the steer ing w[...]

7 ASSEMBL Y T O ROLL TRA CT OR OFF SKID (See Op- er a tion section f or location and func tion of con tr ols) • Press lift le v er plunger and raise attachment lift le ver to its highest po si tion. • Release par king br ake b y depressing clutch/brak e ped al. • Place gearshift le ver in neutral (N) po si tion. • Roll tractor forw ard off [...]

8 ASSEMBL Y ✓ CHECKLIST BEFORE Y OU OPERA TE AND ENJO Y Y OUR NEW TRAC- T OR, WE WISH T O ASSURE THA T Y OU RECEIVE THE BEST PER FOR MANCE AND SA TISF ACTION FR OM THIS QU ALITY PROD UCT . PLEASE REVIEW THE FOLLOWING CHECKLIST : ✓ All assembly instructions hav e been completed. ✓ No remaining loose par ts in car ton. ✓ Battery is proper ly [...]

9 OPERA TION These symbols ma y appear on your tr actor or in literature supplied with the product. Lear n and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) OVER TEMP LIGHT KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF OIL PRESS[...]

10 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY RULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to f amiliar ize y ourself with the locations of v arious controls and ad just ments. Sav e this manual for future ref erence. A TT ACHMENT CLUTCH LEVER - Used to engage the mower b lade[...]

11 01844 NO TE: Under cer tain conditions when tractor is standing idle with the engine running, hot engine exhaust gases ma y cause “brown ing” of grass . T o eliminate this possibility , al- wa ys stop engine when stopping tractor on grass areas . CA UTION: Alwa ys stop tractor com- plete l y , as described above, before leav- ing the operato[...]

12 T O OPERA TE ON HILLS W ARNING: Do not drive up or down hills with slopes great er than 15° and do not drive across an y slope . • Choose the slowest speed bef ore star ting up or down hills. • A void stopping or changing speed on hills . • If slowing is necessar y , mov e throttle control le ver to slower position. • If stopping is abs[...]

13 OPERA TION T O ST ART ENGINE (See Fig. 5) When star ting the engine for the fi rst time or if the engine has run out of fuel, it will take e xtra cr anking time to mov e fuel from the tank to the engine. • Sit on seat in operating position, depress clutch/brak e pedal and set parking brake . • Place gear shift le ver in neutral (N) position[...]

14 MAINTENANCE BEFORE EACH USE T R A C T 0 R Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Battery Level Check Tire Pressure Clean Battery and Terminals FILL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE S[...]

15 MAINTENANCE FIG. 9 FIG. 8 B A TTER Y Y our tractor has a batter y charging system which is suf fi cient f or normal use. Howe ver , periodic charging of the batter y with an automotiv e charger will e xtend its lif e. • K eep batter y and ter minals clean. • K eep batter y bolts tight. • K eep small vent holes open. • Recharge at 6-10 a[...]

16 MAINTENANCE V- B E LT S Check V -belts f or deterioration and wear after 100 hours and replace if necessar y . The belts are not adjustab le. Re place belts if they begin to slip from w ear . TRANSAXLE COOLING K eep transaxle free from build-up of dir t and chaff which can restrict cooling. FIG. 11 FIG. 10 T O CLEAN BA TTER Y AND TERMINALS Corro[...]

17 MAINTENANCE CLEANING • Clean engine, battery , seat, fi nish, etc. of all foreign matter . • Keep fi nished surf aces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotiv e type wax. W e do not recommend using a garden hose or pressure washer to clean y our tractor unless the engine and tr ans- mission are[...]

18 SER VICE AND ADJUSTMENTS W ARNING: TO A V OID SE RI OUS IN JU R Y , BEFORE PERFORMING ANY SER VICE OR ADJUST - MENTS: • Depress clutc h/brake pedal fully and set parking brake. • Place gearshift lever in neutral (N) position. • Place attachment c lutch in “DISENGA GED” position. • T urn ignition key to “STOP” and remove key . •[...]

19 T O REPLA CE MO WER BLADE DRIVE BEL T (See Fig. 18) The mower b lade dr ive belt ma y be replaced without tools. P ar k the tractor on le v el surf ace. Engage parking brake. BEL T REMO V AL - • Remov e mower from tractor (See “T O REMO VE MO W ER” in this section of this manual). • Work belt off both mandrel pulleys and idler pulle ys. [...]

20 SER VICE AND ADJUSTMENTS FIG. 18 T O REPLA CE MO TION DRIVE BEL T (See Fig. 20) P ar k the tractor on le v el surf ace. En gage par king brak e. Fo r a s sis tance, there is a belt installation guide decal on bottom side of left f ootrest. BEL T REMO V AL - • Remove mower (See “TO RE MO VE MO WER” in this section of manual). NO TE: Obser v[...]

21 FIG. 20 02239 ADJUSTMENT BOL T NEUTRAL LOCK GA TE GEARSHIFT LEVER FIG. 21 SER VICE AND ADJUSTMENTS 00811 TRANSAXLE PULLEY ST A TION AR Y IDLER CLUTCHING IDLER ENGINE PULLEY CENTER SP AN KEEPER TRANSAXLE GEAR SHIFT LEVER NEU TRAL- ADJUSTMENT (See Fig. 21) The transaxle should be in neutral when the gear shift le v er is in neutral (N) (loc k gate[...]

22 FIG. 23 SER VICE AND ADJUSTMENTS REPLA CING B A TTER Y (See Figs. 24 and 25) W ARNING: Do not shor t battery ter- mi nals by allowing a wrench or an y other object to contact both terminals at the same time. Bef ore connect- ing battery , remo ve metal brace- lets, wristwatch bands, rings, etc. P ositive terminal must be connected fi rst to pre[...]

23 01536 SER VICE AND ADJUSTMENTS T O REPLA CE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the bac kside of the grill. • Replace b ulb in holder and push bulb holder securely back into the hole in the bac kside of the gr ill. • Close hood. INTERLOCKS AND RELA YS Loose or damaged wiring may cause y our tractor to r un [...]

24 ST ORA GE Immediately prepare your tr actor f or storage at the end of the season or if the tractor will not be used f or 30 days or more. W ARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reac h an open fl ame or spark. Allow the engine to cool before storing in any en clo sure. TRA CT OR Remov e [...]

25 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. W ait se ver al minutes bef ore attempting to star t. 4. Bad spar k plug. 4. Replace spark plug. 5. Dir ty air fi lter . 5. Clean/replace air fi lter . 6. [...]

26 TR OUBLESHOO TING POINTS PROBLEM CA USE CORRECTION Engine continues to run 1. F aulty operator-safety presence control system. 1. Chec k wiring, switches and connections. If not when operator leaves seat corrected, contact an authorized service center/ with attachment clutc h depar tment. engaged P oor cut - uneven 1. Worn, bent or loose blade. [...]

45 LIMITED W ARRANTY The Manuf acturer warrants to the original consumer purchaser that this product as manufactured is free from def ects in mater i- als and work man ship . F or a period of two (2) years from date of purchase b y the original consumer purchaser , we will repair or replace, at our option, without charge f or par ts or labor incurr[...]

46 T E C U M S E H ® Issued Jan uar y 1980 Re vised Jan uar y 1991 T E C U M S E H ® SERVICE POLICY POLICY W ARRANTY LIMITED W ARRANTIES FOR NEW PEERLESS GEAR PO WER TRAIN COMPONENTS A. Products W arranted P eerless Gear and Machine Division of T ecumseh Products Company (“T ecumseh”), subject to the limitations contained below ,will, at its [...]

47 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees. Make turns gradually to preven[...]

®[...]