Yamaha GX-70 manual

Active Servo Technology EJECT DOLBY B NR EJECT Active Servo Technology Active Servo Technology 1 PLAYBACK 2 REC/PLAYBACK DISC CHANGE Active Servo Technology DISC PROGRAM USER VOLUME DOWN UP MEMORY UP DOWN REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNINGBAND A/B/C/D/E [...]

2 2 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All [...]

3 3 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another p[...]

4 4 SUPPLIED ACCESSORIES ● After unpacking, check that the following parts are contained. ACCESSOIRES FOURNIS ● Après le déballage, vérifier que les pièces suivantes sont incluses. ● Remote control transmitter ● Télécommande ● Batteries (size AA, UM/SUM-3, R6, HP-7) ● Piles (format AA, UM/SUM-3, R6, HP-7) ● AM (MW/LW) loop anten[...]

5 5 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology MINI COMPONENT SYSTEM GX – 70 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD INPUT INPUT TAPE 1/2 STA[...]

6 6 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology MINI COMPONENT SYSTEM GX – 70 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD TAPE 1/2[...]

7 7 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology MINI COMPONENT SYSTEM GX – 70 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD TAPE 1/2[...]

8 8 Active Servo Technology Active Servo Technology 4 ij Front speakers Enceintes avant NX-GX70 Center speaker Enceinte centrale NX-C70 Rear speakers Enceintes arrière NX-E70 j[...]

9 9 TAPE STOP PLAY PLAY REC / PAUSE TAPE 1 / 2 LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY PROGRAM USER POWER INPUT SLEEP VOLUME Y T UV W X 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B TAPE C EDIT D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER STOP PLAY / PAUSE S R H G I J Q KL M N O P 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP P[...]

FRONT SPEAKERS DO NOT CONNECT THIS UNIT TO SPEAKERS OTHER THAN NX-C70 (CENTER) OR NX-E70 (REAR). RL R L RL SINCE THIS UNIT HAS AN ACTIVE SERVO CIRCUIT BUILT–IN. DO NOT CONNECT IT TO SPEAKERS OTHER THAN NX–GX70. REAR CENTER REAR SPEAKERS CENTER/REAR OUT IN VCR LD/TV OUT MD/AUX IN AUDIO SIGNAL OUT SUBWOOFER VIDEO SIGNAL MONITOR OUT L R R L POWER [...]

ANTENNA FRONT SPEAKERS DO NOT CONNECT THIS UNIT TO SPEAKERS OTHER THAN NX-C70 (CENTER) OR NX-E70 (REAR). RL R L RL SINCE THIS UNIT HAS AN ACTIVE SERVO CIRCUIT BUILT–IN. DO NOT CONNECT IT TO SPEAKERS OTHER THAN NX–GX70. 75 Ω UNBAL. REAR CENTER REAR FM GND AM CENTER MODE NORMAL PHANTOM SPEAKERS CENTER/REAR OUT IN VCR LD/TV OUT MD/AUX IN AUDIO S[...]

1 1 2 2 ANTENNA FRONT SPEAKERS DO NOT CONNECT THIS UNIT TO SPEAKERS OTHER THAN NX-C70 (CENTER) OR NX-E70 (REAR). RL R L RL SINCE THIS UNIT HAS AN ACTIVE SERVO CIRCUIT BUILT–IN. DO NOT CONNECT IT TO SPEAKERS OTHER THAN NX–GX70. 75 Ω UNBAL. REAR CENTER REAR FM GND AM CENTER MODE NORMAL PHANTOM SPEAKERS CENTER/REAR OUT IN VCR LD/TV OUT MD/AUX IN[...]

E-1 English ENGLISH INTRODUCTION CONTENTS Page PRECAUTIONS ..................................................................2-3 FEATURES .........................................................................4-5 NAMES OF CONTROLS AND INDICATORS ....................6-7 REMOTE CONTROL TRANSMITTER ...............................7-8 SETTING UP THE M[...]

E-2 PRECA UTIONS: READ THIS BEFORE OPERA TING Y OUR UNIT ■ Although the cassette deck’s record/playback heads used in this unit are high quality heads with outstanding reproduction characteristics, they can become dirty through the use of old tapes or from dust accumulation over time. This can have a serious effect on reproduction quality. Clea[...]

E-3 English NOTE Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws. IMPORTANT Please record the serial number of this unit in the space below. Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in [...]

E-4 FEA TURES The System ● 5 Speaker Multi-Channel A udio System Inc luding T w o Front Speakers, One Center Speaker and T wo Rear Speaker s ● Active Serv o Processing Fr ont Speaker System (NX-GX70) ● Free-Standing/W all Mounting T ype Rear Speaker System (NX-E70) ● Remote Contr ol Capability Amplifier ● Minim um RMS Output P ower per Ch[...]

E-5 English FEA TURES Dolb y Pro Logic Surr ound This unit employs a Dolby Pro Logic Surround decoder similar to professional Dolby Stereo decoders used in many movie theaters. By using the Dolby Pro Logic Surround decoder, you can experience the dramatic realism and impact of Dolby Surround movie theater sound in your own home. Dolby Pro Logic emp[...]

E-6 NAMES OF CONTROLS AND INDICA T ORS For amplifier/tuner (See figure 1 on page 5 5 at the beginning part of this manual.) 1 A/B/C/D/E Button 2 PRESET/TUNING/BAND Selector Button 3 Remote Control Sensor 4 PROGRAM Selector Button 5 MUSIC Button 6 Equalizer Control Buttons ( ECHO Buttons) 7 USER Button 8 POWER Switch 9 PHONES Jack 0 User Program MEM[...]

E-7 English For T ape dec k (See figure 3 on page 7 7 at the beginning part of this manual.) [ Reverse MODE Selector Button DOLBY NR Button ] Deck 1 Cassette Compartment ^ Deck 1 EJECT Button a Fast Wind Button: b Stop Button: c Play Button: d Fast Wind Button: e Deck 2 EJECT Button f Deck 2 Cassette Compartment g DUBBING (NORMAL/HIGH) Buttons h [...]

E-8 Loading the batteries f or the remote contr ol transmitter (See figure 6 on page 9 9 .) 1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.) 2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment. * Installing the batteries improperly may cause failure. 3 Replace th[...]

E-9 English SETTING UP THE SPEAKERS This system is designed to provide the best sound-field quality with a 5 speaker configuration: front speakers, rear speakers and a center speaker. You may omit the center speaker, if for some reason it is not practical to use a center speaker. (Refer to the “ 4- Speaker Configuration ” shown below.) The fron[...]

E-10 ■ Mounting the rear speakers Mount the rear speakers on a shelf, rack or on the floor directly, or hang them on the wall. To mount the rear speakers on a wall 1 Attach the provided mounting bracket to the rear of the speaker by using the provided screws. 2 Fasten screws into a firm wall or wall support as shown in the diagram, and hang the h[...]

E-11 English ■ Mounting the center speaker Place the speaker on top of the TV or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided pads at four points on bottom of the speaker. Notes • Do not place the speaker on top of [...]

E-12 (1) (2) (3) (4) ANTENNA R L 75 Ω UNBAL. REAR CENTER REAR FM GND AM ANTENNA 75 Ω UNBAL. FM GND AM ANTENNA 75 Ω UNBAL. FM GND AM ANTENNA 75 Ω UNBAL. FM GND AM CENTER MODE NORMAL PHANTOM SPEAKERS CENTER/REAR Antenna connection (1) Supplied FM antenna Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire [...]

E-13 English Connecting external components (See figure 9 on page 1 1 1 1 .) This system can be connected with external audio and video components. Make connections between this system and other components using RCA pin plug connector cables correctly, that is to say L (left) to L and R (right) to R . Also, refer to the owner’s manual for each co[...]

E-14 If desired, you can adjust brightness of the display. 1 Press and hold the DISPLAY button for more than 2 seconds so that “DIMMER±0” appears on the display. 2 Holding the DISPLAY button pressed, turn the VOLUME control clockwise to increase or counterclockwise to decrease brightness. This adjustment can be made even though the power of th[...]

E-15 English SPEAKER B ALANCE ADJUSTMENT ANTENNA FRONT SPEAKERS DO NOT CONNECT THIS UNIT TO SPEAKERS OTHER THAN NX-C70 (CENTER) OR NX-E70 (REAR). RL R L RL SINCE THIS UNIT HAS AN ACTIVE SERVO CIRCUIT BUILT–IN. DO NOT CONNECT IT TO SPEAKERS OTHER THAN NX–GX70. 75 Ω UNBAL. REAR CENTER REAR FM GND AM CENTER MODE NORMAL PHANTOM SPEAKERS CENTER/RE[...]

E-16 SPEAKER B ALANCE ADJUSTMENT 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B TAPE C EDIT D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER TAPE STOP STOP PLAY / PAUSE PLAY PLAY REC / PAUSE TAPE 1 / 2 LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY PROGRAM USER POWER INPUT SLEEP VOLUME 6 Adjust the sound output levels of the cente[...]

E-17 English CD pla yback 1 Press the CD input selector button. 2 Press the OPEN/CLOSE button to open the disc table. 3 Place discs on the trays, label side up. * Up to three discs can be loaded on the trays. To load the third disc, rotate the disc table by pressing the DISC SKIP button on the remote control transmitter. * 8 cm (3”) discs may be [...]

E-18 1 1 2 2 3 3 4 4 5 5 + I0 E 6 6 7 7 8 8 9 0 CD PRESET 1 1 2 2 3 3 4 4 5 5 TIME A DISC SKIP PROG B TAPE C EDIT D + I0 E OPEN / CLOSE RANDOM REPEAT MODE 6 6 7 7 8 8 9 0 CD PRESET TUNER TAPE STOP STOP PLAY / PAUSE PLAY PLAY REC / PAUSE TAPE 1 / 2 LEVEL MUSIC TEST FLAT CENTER / REAR / DELAY PROGRAM USER POWER INPUT SLEEP VOLUME COMP A CT DISC PLA Y[...]

E-19 English COMP A CT DISC PLA YER OPERA TION “Skip search” and “Manual search” are performed using the same buttons. Skip sear ch The beginning of any track can be found automatically. 1 Select a disc and begin playback. 2 Press the button to advance or button to reverse through the disc. Press once for each track to be advanced or revers[...]

TRACK TOTAL USER TAPE 1 PROGRAM OGIC HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 TRACK USER TAPE 1 PROGRAM OGIC HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 E-20 COMP A CT DISC PLA YER OPERA TION Pr ogram play You can program up to 20 tracks in any desired order. 1 Load discs and close the disc table. 2 When in the stop m[...]

E-21 English To stop program play • Press the stop button. The first programmed track number will be displayed. • To resume playback, press the play/pause / button. Playback will begin from the beginning of the program. To cancel a programmed sequence There are several methods as described below. • Press the stop button while the unit is stop[...]

E-22 Repeat pla y All discs, an entire disc, a single track or a programmed sequence can be continuously repeated. 1 While watching the display, press the REPEAT button once or more to select a desired repeat play mode (S REP or F REP). 2 Press the play/pause / button. Repeat play modes SINGLE REPEAT (S REP) A single track is played back repeatedly[...]

E-23 English Random pla y Tracks on a selected disc or all discs on the disc table can be played back in a random order. 1 Load discs and close the disc table. 2 If necessary, switch the disc play mode by pressing the disc play MODE selector button. * If the single disc play mode is selected, select a desired disc by pressing the DISC SKIP button. [...]

E-24 Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning). A utomatic tuning 1 Press the INPUT selector or button once or more so that “TUNER” appears on the [...]

E-25 English TUNING OPERA TION Preset tuning This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored. To store stations (Example: To store a station to A1) 1 Tune in to[...]

E-26 A utomatic preset tuning You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page. 1 Press the INPUT selector or b[...]

E-27 English Displa ying RDS data This unit can be turned into the following four modes to display RDS data. PS (Pr ogram Ser vice name) mode: Displays the name of the RDS station now being received instead of the frequency. PTY (Pr ogram T ype) mode: Displays the type of the program on the RDS station now being received. There are 15 program types[...]

E-28 Changing the RDS modes When an RDS station is received, by pressing the FREQ PS/PTY/RT/CT selector button once or more, you can change the display mode among the RDS modes employed by the received station in the order shown below. (The RDS mode not employed by the station cannot be selected.) * If the station is not an RDS station, pressing th[...]

E-29 English Calling a pr ogram of your desired pr ogram type from among preset RDS stations (PTY SEEK) By designating a program type, the unit automatically searches all preset FM stations for an RDS station which broadcasts a program of that program type. * There are 15 program types to classify RDS stations. For details, refer to page 27. 1 Turn[...]

E-30 RECEIVING RDS ST A TIONS < U .K. and Eur ope models only > 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E R[...]

E-31 English Detection hole Tab T APE DECK OPERA TION General inf ormation • Do not use C-120 tapes or poor-quality tapes, since they can cause malfunctions. • Before loading a tape into the cassette compartment, tighten the tape slack with a pen or pencil. • Tapes have removable tabs which prevent accidental recording or erasing from taking [...]

E-32 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD INPUT INPUT TAPE 1/2 START MODE FREQ[...]

E-33 English Winding the tape 1 If during playback, first press the stop button. 2 Next press the fast wind or fast wind button to wind the tape. 3 Press the stop button to stop. Note When the tape is wound to the end, this unit will then function as described below, according to the setting of the reverse MODE selector button. : The tape stops at [...]

E-34 Continuous pla ybac k 1 Load the tapes into the deck 1 and deck 2 cassette compartments. 2 If the reverse mode “ ” is not selected, press the reverse MODE selector button to select it. The reverse MODE selector button can be operated before or during playback, and changes tape playback as follows: 3 Select the tape to be played back first [...]

E-35 English General inf ormation • When recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality. • The automatic recording level control circuit automatically controls the level of the input signal used for recording. • Adjusting the VOLU[...]

E-36 To stop recording temporarily 1 Press the stop button of the CD player. 2 Choose the selection to be recorded next by using the or button, and then press the play/pause / button of the CD player to resume recording (or simply press the track number input button on the remote control transmitter). To stop recording Press the stop button of the [...]

E-37 English Recor ding CD(s) on both sides of a tape automatically 1 Press the CD input selector button and load the disc to be recorded. 2 Select the disc by pressing the DISC SKIP button. 3 Load a tape into the deck 2 cassette compartment. 4 When recording with the Dolby NR system, press the DOLBY NR button so that “ B” lights up on the disp[...]

E-38 A utomatic tape-editing This convenient feature can be used to program tracks on a disc (or discs) for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at e[...]

E-39 English RECORDING COMP A CT DISCS Notes • When this CD player is in the all disc play mode, if the tape’s total possible recording time is longer than the total playing time of the selected disc, tracks on another disc are recorded continuously. In this case, as many as three discs can be recorded automatically. • The CD player’s repea[...]

TRACK REM USER TAPE 1 RAM HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 B A TRACK USER TAPE 1 GRAM HALL PROG VOLUME OVER 15 123 4 789 1 0 13 14 15 5 11 6 12 B A E-40 RECORDING COMP A CT DISCS T o recor d programmed trac ks from one or more discs 1 Press the CD input selector button and load a disc (or discs) on the disc table. 2 Follow [...]

E-41 English General inf ormation • When recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality. • The automatic recording level control circuit automatically controls the level of the input signal used for recording. • Adjusting the VOLU[...]

E-42 Dubbing • During dubbing, adjusting the VOLUME control and using the built-in graphic equalizer and the sound field processor have no effect on the recorded sound. • Try to use the same tape formula and length for the recording tape as for the master tape. 1 Press the TAPE 1/2 input selector button. 2 Load a prerecorded tape into the deck [...]

E-43 English OPERA TING EXTERNAL UNITS CONNECTED WITH THIS SYSTEM T o listen to or watch a sour ce on an external unit connected with this system 1 Press the INPUT selector or button once or more and select the position of input source (MD/AUX, VCR or LD/TV) you will play back confirming it on the display. * The names of input source positions corr[...]

E-44 The built-in graphic equalizer presents you with the pleasure of listening to music with various sound effects. This system provides 4 preset equalizer modes as listed right. You can enjoy listening to music with a desired sound effect by selecting one of these modes. In addition, the built-in 5 band graphic equalizer allows you to adjust the [...]

E-45 English Adjusting the graphic equalizer f or your desired sound taste The 5 band graphic equalizer allows you to adjust the level for each frequency band. * Make adjustment by monitoring the equalizer level indicators on the display. 1 Play back a source. (For source playback, refer to the sections beginning on page 17.) 2 Press the equalizer [...]

E-46 The Sound Field Processor built into this system presents you with the ambience of an actual concert hall etc. by adding effects as sonic reflections or reberverations that create the sound environment of a hall etc. This system provides preset sound field programs shown below. You can enjoy an excellent audio sound field by selecting one of t[...]

E-47 English Listening to the m usic with a sound field effect 1 Play back a source. (For source playback, refer to the sections beginning on page 17.) 2 Press the PROGRAM button once or more so that the name of a desired program appears on the sound field program indicator. * Whenever you press the PROGRAM button, the program changes and is displa[...]

Adjusting CENTER LEVEL If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 15–16. Control range : +10 to –21 1 Press the CENTER/REAR/DELAY selector button once or more so that “CENT” appears on the display. 2 By continuously pressing the [...]

E-49 English USING SOUND FIELD PROCESSOR Adjusting DELA Y TIME You can adjust the time difference between the beginning of the source sound and the beginning of the effect sound. This adjustment can be made to all programs (except DOLBY 3 STEREO) individually. By applying more or less delay, sound effects, background noise, and ambient noise coming[...]

E-50 Your favorite pair of any equalizer mode (or an equalizer pattern of your own adjusting) and any sound field program can be stored as a user program. Up to 4 pairs can be stored as desired. To store 1 Select a desired equalizer mode by pressing the MUSIC button. * If desired, adjust the equalizer as you prefer by using the equalizer control bu[...]

Feature Medium frequencies of the source sound (vocals etc.) are attenuated. This mode is suitable for singing karaoke using a normal audio source with vocals. Note There may be a case that vocals cannot only be attenuated effectively according to a source. Only signals on the left channel of the source are output from the left and right speakers. [...]

E-52 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD INPUT INPUT TAPE 1/2 START MODE FREQ[...]

E-53 English 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPLAY CD INPUT INPUT TAPE 1/2 START M[...]

E-54 Timer recor ding (T o recor d a tuner program) 1 Load a blank tape into the deck 2 cassette compartment. 2 If desired, change the setting of the reverse mode and use the Dolby NR system. 3 Tune in to the station of which program you want to record. 4 Follow step 2 of the “Timer play” on page 52 and 53. * In step ➁ , select “TUNER” po[...]

E-55 English HO W T O USE THE BUIL T -IN TIMER 1 PLAYBACK 2 REC/PLAYBACK EJECT OPEN/CLOSE DISC CHANGE Active Servo Technology 1 2 3 DISC PROGRAM USER VOLUME DOWN UP MEMORY DOWN UP REC/PAUSE MODE HOUR MIN NORMAL DUBBING HIGH MEMORY TIME ADJ DOLBY NR AUTO/MAN’L TIMER TIMER REC MUSIC POWER PHONES PRESET/TUNING/BAND A/B/C/D/E RANDOM REPEAT EDIT DISPL[...]

E-56 Internal care • Dirty heads, capstans and pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercially available head/pinch roller cleaner or isopropyl alcohol, or with a commercially available cleaning tape. • After long use, the deck’s heads and capstans may become magnetized, causi[...]

E-57 English CAUSE Interference from starting motor of nearby car. Interference from thermostat of nearby electrical appliance. Antenna input is too weak due to obstructions or excessive distance from broadcasting station. Insufficient antenna input. Preset memory has been erased. Interference from source such as lightning, flourescent lights, elec[...]

E-58 SPECIFICA TIONS As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. ■ Amplifier section Minimum RMS Output Power per Channel Front L, R 6 ohms, 1 k[...]

E-59 English SPECIFICA TIONS ■ Speaker section Type Front .................. 3-Way Active Servo Processing Speaker System (Magnetic-Shielding Type) Center ................................................. Full Range Speaker System (Magnetic-Shielding Type) Rear .................................................... Full Range Speaker System Speaker[...]

VV18180 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S .A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANAD A Y AMAHA ELECTRONIK EUR OP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .R. OF GERMANY Y AMAHA ELECTRONIQUE FRANCE S.A. RUE AMBR OISE CROIZA T [...]