Ir para a página of
Manuais similares
-
Keyboard
Acer KB.I170A.134
202 páginas -
Keyboard
Acer Travelmate 4200 series
106 páginas -
Keyboard
Acer Aspire 5920G
104 páginas -
Keyboard
Acer Keyboard Darfon
131 páginas -
Keyboard
Acer EM-7T HM50/70
182 páginas -
Keyboard
Acer KB.I170A.139
202 páginas -
Keyboard
Acer Keyboard UI
196 páginas -
Keyboard
Acer EM-7Tv2 HM51
201 páginas
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Acer KB.I170A.134. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoAcer KB.I170A.134 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Acer KB.I170A.134 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Acer KB.I170A.134, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Acer KB.I170A.134 deve conte:
- dados técnicos do dispositivo Acer KB.I170A.134
- nome do fabricante e ano de fabricação do dispositivo Acer KB.I170A.134
- instruções de utilização, regulação e manutenção do dispositivo Acer KB.I170A.134
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Acer KB.I170A.134 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Acer KB.I170A.134 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Acer na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Acer KB.I170A.134, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Acer KB.I170A.134, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Acer KB.I170A.134. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
Aspire 5532 Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.acer .com.tw[...]
-
Página 2
II Revision History Please refer to the table below for the updates ma de on Aspire 5532 service guides. Date Chapter Up dates[...]
-
Página 3
III Copyright Copyright © 2009 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer languag e, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without t[...]
-
Página 4
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to av[...]
-
Página 5
V Preface Before using this information and the product it s upports, please read the fo llowing general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering. T o better fit local market requirements and enhance product com[...]
-
Página 6
VI[...]
-
Página 7
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Your Acer Notebook tour . . . . . . . . . . . . . . [...]
-
Página 8
VIII T able of Contents Removing the Power Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Removing the Left Speake r Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Removing the Right Speake r Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Removing t[...]
-
Página 9
IX T able of Contents External Mouse Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Other Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Intermittent Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]
-
Página 10
X T able of Contents[...]
-
Página 11
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: NOTE: Items denoted with a (*) are available for select models only . Operating System • Genuine Windows® Vista™ • Genuine Windows® 7™ Platform • AMD Athlon™ 64 X2 dual -core processor • AMD Athlon™ 64 single-core processo r •[...]
-
Página 12
2 Chapter 1 Audio • Realtek ALC272X-GR for High Defini tion Audio Codec with Dolby Digital Live • Internal speakers x2 (2W) • Mic-in jack • Headphone/Line out jack Dimensions and Weight • 372.3mm x 246.5mm x 26.8mm/40.6mm with ID • Weight < than 3100g (15 .6" LCD/ 6-cell battery/super-multi ODD) Communication •W i r e l e s s [...]
-
Página 13
Chapter 1 3 I/O interface • VGA port, 15 pins • DC-IN port for adapter • RJ-45 Ethernet port for LAN • 2 USB port • Headphone out / Line-out • Microphone-in • Multi-in-1 card reader (SD™, MMC, MS, MS PRO, xD • Kensington Lock (7.5mm) Environment • T emperature: • Operating: 5 °C to 35 °C • Non-operating: -20 °C to 65 °C [...]
-
Página 14
4 Chapter 1 System Block Diagram[...]
-
Página 15
Chapter 1 5 Your Acer Notebook tour After knowing your computer features, le t us show you around you r new computer . Front View No. Icon Item Description 1 Acer Crystal Ey e webcam Web camera for video communication (for selected models). 2 Display screen Also called Liquid-Crystal Display (LCD), displays computer output. 3 T ouchpad toggle T urn[...]
-
Página 16
6 Chapter 1 Closed Front View NOTE: 1 The front pa nel indicators are visi ble even when th e computer cover is closed 7 Click buttons (left and right) The left and right buttons function like the left and right mouse bu ttons. 8 Palmrest Comfortable support area for your ha nds when you use the computer . 9 HDD Indicates when the hard disk drive i[...]
-
Página 17
Chapter 1 7 Rear View Left View No. Icon Item Description 1 V entila tion slots Enable the computer to stay cool, even after prolonged use. No. Icon Item Description 1 DC-in jack Connects to an AC adapter 2 Ethernet (RJ-4 5) port Connects to an Ethernet 10/100-based network. 2 External display (VGA) port Connects to a display device (e.g. external [...]
-
Página 18
8 Chapter 1 Right View Bottom View No. Item Description 1 Optical drive Internal optica l drive; accepts CDs or DVDs. 2 Optical disk access indicator Lights up when the optical drive is active. 3 Optical drive eject button Ejects the optical disk from the drive. 4 Emergency eject hole Ejects the optical drive tray when the computer is tu rned off. [...]
-
Página 19
Chapter 1 9 3 Battery lock Locks the battery in position. 4 Hard disk bay Houses the computer's hard disk (secured with screws). 5 Memory compartment Houses the computer's main memory . 5 V entilation s lots and cooling fan Enable the computer to stay cool, even after prolonged use. Note : Do not cover or obstruct the fan opening. No. Ico[...]
-
Página 20
10 Chapter 1 Indicators The computer has several easy-to-read status indicators . T he front panel indicato rs are visible even wh en the computer cover is closed. NOTE: 1. Chargi ng: The light shows amber when the battery is charging. 2. Fully ch arged: The light sho ws green when in AC mode. Icon Functio n Description Power Indicates the computer[...]
-
Página 21
Chapter 1 11 TouchPad Basics The following items show you how to use the T ouchPa d: • Move your finger across the T ouchPad (1) to move th e cursor . • Press the left (2) and right (3) buttons located beneath the T ouchPad to perform selection and execution functions. These two buttons are simila r to the left and right buttons on a mouse. T a[...]
-
Página 22
12 Chapter 1 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, fun ction and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can toggle on and off. The embedded numeri c keypad functions like a desktop nume ric keypad. It is indicated [...]
-
Página 23
Chapter 1 13 Windows Keys The keyboard has two keys that perform Wi ndows-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu. It can also be used with other keys to provide a variety of functions: <> : Open or close th e S t art men[...]
-
Página 24
14 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination. Hotkey Icon Functio n Description <Fn> + <F2>[...]
-
Página 25
Chapter 1 15 Special Key Y ou can locate the Euro symbol and the US dollar si gn at the upper-center and/or bottom-right of your keyboard. The Euro symbol 1. Open a text editor or word processor. 2. Hold <Alt Gr> and the n press the <5> key at the upper-cente r of the keyboa rd. NOTE: Note : Some fonts and software do not support the Eu[...]
-
Página 26
16 Chapter 1 Using the System Utilities Acer GridVista (dual-display compatible) NOTE: This feature is only available on certain models. T o enable the dual monitor featu re of the notebook, firs t ensure that the second moni tor is conn ected, then select St art, Control Panel, Display and click on Settings . Select the secondary monitor (2) icon [...]
-
Página 27
Chapter 1 17 Hardware Specifications and Configurations Processor Processor Specifications CPU Fan T rue V alue T able • Throttling 50%: On=90 °C, Off=80°C • OS Shutdown: 95°C • H/W Shutdown: 92°C Northbridg e Southbridge BIOS Item Specification CPU • AMD Athlon64 Dual-Core Process, Cache 1MB, TK42 • AMD Athlon 64 Process, 1.6GHz, Cac[...]
-
Página 28
18 Chapter 1 System Memory Memory Combinations NOTE: Above table lists s ome system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 co uld be Features • Flash ROM 1MB • Supports ISIPP • Supports Acer UI • Supports multi-boot • Suspend[...]
-
Página 29
Chapter 1 19 reversed. LAN Interface Wireless Module 802.1 1b/g/n Hard Disk Drive Interface Super-Multi Drive Item Specification LAN Chipset Atheros AR8132L Package 48 pin QFM LAN connector type RJ45 LAN connector location Left side Item Specificati on Manufacturer Foxconn Model Atheros HB93 Item Specification V endo r & Model Name Seagate ST91[...]
-
Página 30
20 Chapter 1 Audio Interface Power and Keyboard Controller T ransfer rate (MB/sec) Sustained: 3,600 KB/s (24x) max. Sustained: 1 1.08 Mbytes/s (8x) max. Sustained: 1,571 (typical) Sustained: 10,993 (typical) Buffer Memory 2 MB Interface SA T A Applicable disc formats • DVD-ROM: • 4.7GB (Single Layer) • 8.5GB (Dual Layer) • DVD-R: • 3.95GB[...]
-
Página 31
Chapter 1 21 Battery LCD 15.6” Card Reader Supply Current T otal number of keyp ads 99-/100-/103-key keyboard Windows logo key Y es Hotkeys See “Hot Keys” on page 14. Item Spec ification 6 Cell V endo r & model name SANYO/SONY/P ANASONIC/SIMPLO AS2009A Battery T ype Li-ion Pack capacity 4400 mAh Normal V oltage 2.2 Ah Package configuratio[...]
-
Página 32
22 Chapter 1 General Features • PCI-E interface • Push-push type •D u m m y c a r d Item Specification[...]
-
Página 33
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is al ready properly configured and optimi zed, and you do not need to run this utility . However , if you encounter configuration problems, you may need to run[...]
-
Página 34
24 Chapter 2 Aspire 5532 BIOS Information The Information screen displays a summary of your computer ha rdware information. NOTE: The screen above is for your reference only . Actual values may differ according to model. The table below describes the parameters in this screen. Parameter Description CPU T ype This field shows the CP U type and speed[...]
-
Página 35
Chapter 2 25 Main The Main screen allows th e user to set the system time and date as well as enable and disa ble boot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen. Parameter Description Format/Optio n System T ime Sets the system time. T[...]
-
Página 36
26 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mpu ter from unauthorized use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you ha ve three tries be fore the syst[...]
-
Página 37
Chapter 2 27 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a password in the “Enter New Password” fiel d. The password length can not ex ceed 8 alphan[...]
-
Página 38
28 Chapter 2 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw ord in the Enter Cur rent Password fiel d and press Enter . 3. T ype a password in the Enter New Password field. Retype the password in the Confirm New Pa[...]
-
Página 39
Chapter 2 29 Boot This menu allows the user to deci de the order of boot de vices to load the operatin g system. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module ba y . Select Boot Devices to select specific devices to support boot. PhoenixBIOS Setup Utility Item Specific Help Use < [...]
-
Página 40
30 Chapter 2 Exit The Exit screen allows you to save or discard any changes you made an d qui t the BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS. Exit Discarding Changes Exit utility without saving setup data to CMOS. Load Setup Def[...]
-
Página 41
Chapter 2 31 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following conditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you sh[...]
-
Página 42
32 Chapter 2 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Men u. 2. Select Boot Menu to modify the boot priority orde r , for ex ample, if using USB HDD to Update BIOS, move USB HDD to position 1. 3. Execute the FLASH.BA T batch file to update BIOS in DOS mode. The flash proc[...]
-
Página 43
Chapter 2 33 4. In flash BI OS, the me ssage Please do not remove AC Power Source displays. Plug in the AC po wer to continue. 5. Flash is complete when the message Flash programming complete displays. WinFlash Utility Perform the following steps to use the WinFlash Utility: 1. Double-click the WinFlash executable. 2. Click OK to begin the update. [...]
-
Página 44
34 Chapter 2 Remove HDD/BIOS Password Utilities This section provide s you with d e tails about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is gen erated. T o reset the HDD p assword, perform the following step s: 1. An error code is generated for unlocking the HDD. Note down this code[...]
-
Página 45
Chapter 2 35 Removing BIOS Passw ords: T o clear the User or Supervisor passwords through hardware, open the WLAN door and use a metal instrument to short the J1 jumper. Cleaning BIOS Passwords T o clean the User or Supervisor passwords using software utilites, perform the following steps: 1. From a DOS prompt, execute clnpwd.e xe 2. Press 1 or 2 t[...]
-
Página 46
36 Chapter 2 The onscreen message determines whether the func tion is successful or not. Using Boot Sequence Selector The Boot Sequen ce Selector allows the b oot order to be changed without accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen. 3. Select t[...]
-
Página 47
Chapter 2 37 Using DMITools The DMI (Desktop Management Interface) T ool copies BIOS information to EEPR OM to be used in the DMI pool for hardware managemen t. When the BIOS displays V erifying DMI pool data it is checki ng that the t able correlates with th e hardware before sending to the operating system (Windows, etc.). T o update the DMI Pool[...]
-
Página 48
38 Chapter 2 Using the LAN MAC EEPROM Utility Y ou can use the MAC.BA T utility to write t he MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (for example: Notepad) to open the MAC.CFG file. Y ou can see the MAC.CFG contents as below: 2. In DOS mode, run th e MAC.BA T file to write MAC values to eeprom. WriteData = ‘001 12233 4455[...]
-
Página 49
Chapter 3 39 Machine Disassembly and Replacement IMPORT ANT : The outside housing and color may vary from the mass produced model. This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . Disassembly Requirements T o disassemble the computer , you need the follow ing tools: ?[...]
-
Página 50
40 Chapter 3 Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system. 3. Place the system on a flat, st able surface. 4. Remove the battery pack. Disassembly[...]
-
Página 51
Chapter 3 41 External Module Disassembly Process IMPORT ANT : The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic represen tati on of the external module disassembly sequence and instructs you on the components that need to be removed du ring servicing. [...]
-
Página 52
42 Chapter 3 Removing the Battery Pack 1. T urn computer over . Slide the battery lock in the direction shown. 2. Slide and hold the battery rel ease latch to the release po sition (1), then lift out the battery pack from the main unit (2). 1 2[...]
-
Página 53
Chapter 3 43 Removing the SD Dummy Card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot.[...]
-
Página 54
44 Chapter 3 Removing the Lower Covers 1. See “Removing the Battery Pack” on page 42. 2. Remove the three (3) screws securing the Memory and HDD Covers. 3. Remove the HDD cover as shown. 4. Carefully open the Memory Cover . Ste p Size Quantity Screw T ype Lower Covers M2.5*8 3 Memory Cover HDD Cover[...]
-
Página 55
Chapter 3 45 Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 42. 2. Remove the screw securing the ODD module. 3. Insert a suitable tool into the access slot in the battery bay as shown. G ently lever the ODD module out of the chassis. 4. Pull the optical drive modul e out from th e chassis. Ste p Size Quantity Screw[...]
-
Página 56
46 Chapter 3 5. Remove the two (2) screws se curing the ODD bracket a nd remove the ODD b racket from the optical disk drive module. 6. Remove the ODD bezel by pulling the top edge downward and clea r of the module. Ste p Size Quantity Screw T ype ODD Bracket M2*3 2[...]
-
Página 57
Chapter 3 47 Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 44. 2. Push out the release latches on both sides of the DIMM socket to release th e DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the seco nd DIMM module if present.[...]
-
Página 58
48 Chapter 3 Removing the WLAN Module 1. See “Removing the Lower Covers” on page 44. 2. Remove the adhesive tape securing the Antenna cables in place. 3. Disconnect the antenna cables from the WL AN Board. NOTE: Cable placement is Black to the MAIN terminal and White to the AUX terminal.[...]
-
Página 59
Chapter 3 49 4. Move the antenna away and remove the two (2) screws to release the WLAN Board . 5. Detach the WLAN Board from the WLAN socket. Ste p Size Quantity Screw T ype WLAN Module M2*3 2[...]
-
Página 60
50 Chapter 3 Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 44. 2. Using the pull-tab, slide the HDD Module in the di rection of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay . NOTE: T o prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.[...]
-
Página 61
Chapter 3 51 4. Remove the four (4) screws (two each side ) securing the hard disk to the carrier . 5. Remove the HDD from the carrier . Ste p Size Quantity Screw T ype HDD Carrier M3*3 4[...]
-
Página 62
52 Chapter 3 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Module M2.5*8 2 86.N28 02.003 LCD Module M2.5*8 4 86.N28 02.003 Upper Cover M2.5*8 1 1 86.N2802.003 Upper Cover M2.5*8 9 86.N2802.003 Power Board M2*3 2 86.N2802.004 Left S peaker Mo dule M2*3 1 86.N2802.004 Right S peaker Module [...]
-
Página 63
Chapter 3 53 Removing the Switch Cover CAUTION: Using metal tools to remove the Switch Cover may cause damage to the outer casing. The use of plastic tools or fingers is recommended to remove the Switch Cover . 1. See “Removing the Battery Pack” on page 42. 2. T urn the computer over . Press down the / and * keys on the right si de of the Keybo[...]
-
Página 64
54 Chapter 3 Removing the Keyboard 1. See “Removing the Switch Cover” on page 53. 2. Pry up the centre of the Keyboard and rotate it upward awa y from the Upper Cover . 3. T urn the keyboard over o n to the T ouchPad area to expose the FFC connector . 4. Open the locking latch and disco nnect the FFC from the mainbo ard. 5. Lift the keyboard cl[...]
-
Página 65
Chapter 3 55 Removing the LCD Module 1. See “Removing the Keyboard ” on page 54. 2. T urn the computer over . Remo ve the two (2) se curing screws from the bottom of the chassis. 3. Remove the Antenna Cables from the cable channe l as sh own. Ensure that the cables are free from all cable clips. Ste p Size Quantity Screw T ype LCD Module M2.5*8[...]
-
Página 66
56 Chapter 3 4. S tand the computer on the LCD Panel and pull the Antenna cab les completely through the chassis. 5. Disconnect the LCD cable from the Mainboard and remove the cable from the cable channel. 6. Remove the white Antenna cable from the cable channe l. Ensure that the cable is completely free of the retaining clips all the way to the hi[...]
-
Página 67
Chapter 3 57 7. Remove the adhesive tape securing the Antenna cable to the Upper Cover . 8. Remove the black Antenna cable from the cable channel as shown. Ensure that the cable is completel y free of the retaining clips all the way to the hinge well. 9. Open the LCD Panel to the full extent to expose the Hin ge Covers. 10. Press the left side Hing[...]
-
Página 68
58 Chapter 3 12. Remove the four (4) securing screws (two each side) from the LCD module. 13. Remove the lef t and right screw covers from on top of the hinges 14. Lif t the LCD Module clear of the Upper Cover . Ste p Size Quantity Screw T ype LCD Module M2.5*8 4[...]
-
Página 69
Chapter 3 59 Removing the Upper Cover 1. See “Removing the LCD Module” on page 55. 2. T urn the computer over . Remo ve the eleven screws on the bottom panel. 3. T urn the computer over . Remo ve the three (3) screw caps at the rear of the Upper Cover as shown. Ste p Size Quantity Screw T ype Upper Cover M2.5*8 1 1[...]
-
Página 70
60 Chapter 3 4. Disconnect the following four (4) cables from the Ma inboard. A B C D[...]
-
Página 71
Chapter 3 61 NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFCs whenever available to prevent damage . 5. D isconnect A as shown. 6. Disconnect C as shown. 7. R elease the locking latch on B and remove th e FFC cable as shown. 8. R elease the locking latch on D and remove th e FFC cable as sh[...]
-
Página 72
62 Chapter 3 9. Remove the nine (9) screws on the top panel. 10. S tarting at the rear left side of t he cover , pry apart the Upper and Lower Covers as shown. Work along the back edge of the casing to the right as shown, then lift the Upper Cover clear of the Lower Cover . Ste p Size Quantity Screw T ype Upper Cover M2.5*8 9[...]
-
Página 73
Chapter 3 63 Removing the Power Board 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Power Board on the Upper Co ver as shown. 3. Remove the two (2) screws securing the Power Board to the Upper Co ver . 4. Lift the Power Board clear of the Upper Cover as shown . Ste p Size Quantity Screw T ype Power Board M2*3 2[...]
-
Página 74
64 Chapter 3 Removing the Left Speaker Module 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Left S pe aker Module on the Uppe r Cover as shown. 3. Remove the adhesive tape from the S peaker cable . 4. Remove the S peaker cable from the cable channel. Ensu re th at the cable is free from all cable clips.[...]
-
Página 75
Chapter 3 65 5. Remove the one (1) securing screw from the Left S peaker Module . 6. Lift the S peaker clear of the Upper Cover , left side first as shown. Ste p Size Quantity Screw T ype Left S peaker Module M2*3 1[...]
-
Página 76
66 Chapter 3 Removing the Right Speaker Module 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Right S peaker Module on the Upper Cover as shown. 3. T urn the Upper Cover over and remove the Right S peake r Module cable from the cable channel. Ensure that the cable is free from all cable clips. 4. T urn the Upper Cover over and pas[...]
-
Página 77
Chapter 3 67 5. Remove the one (1) securing screw from the Right S peaker Module. 6. Lift the S peaker clear of the Upper Cover , right side first as shown. Ste p Size Quantity Screw T ype Right S peaker Module M2*3 1[...]
-
Página 78
68 Chapter 3 Removing the TouchPad Bracket IMPORT ANT : The T ouchPad Board cann ot be removed individua lly . T o replace the T ouchPad Board, replace the entire Upper Cover . 1. See “Removing the Upper Cove r” on page 59. 2. Lift the FFC to detach the adhesive securing the cable to the Upper Cover . 3. Release the FFC locking latch and discon[...]
-
Página 79
Chapter 3 69 4. Remove the two (2) screws from T ouchPad bracket. 5. Lift the rear edge of the T ouchPad bracket first to clear the se curing clips and remove it as shown. Step Size Quantity Screw T ype T ouchPad Bracket M2*3 2[...]
-
Página 80
70 Chapter 3 Removing the Mainboard 1. See “Removing the Upper Cove r” on page 59. 2. Remove the one (1) securing screw from the Mainboard. 3. Lift the mainboard from the chassis, right edge fi rst, and place it on a clean, dust-free surface. Ste p Size Quantity Screw T ype Mainboard M2.5*4 1[...]
-
Página 81
Chapter 3 71 Removing the RTC Battery IMPORT ANT : Follow local regulations fo r disposal of all batteries. The RTC Battery is soldered to the Mainboard. T o replace the battery , solder the new battery to the connections shown.[...]
-
Página 82
72 Chapter 3 Removing the Thermal Module 1. See “Removing the Lower Covers” on page 44. 2. T urn the Mainboard over to access the Thermal Module. 3. Remove the four (4) securing screws (in reverse numeri cal orde r from screw 4 to screw 1) from the Thermal Module. Ste p Size Quantity Screw T ype Thermal Module M2.5*6 4 1 2 3 4[...]
-
Página 83
Chapter 3 73 4. Using both hands, lift the Thermal Module clear of the Mainboard.[...]
-
Página 84
74 Chapter 3 Removing the CPU Fan 1. See “Removing the Therma l Module” on page 72. 2. Disconnect the Fan cable from the Mainboard as shown . 3. Remove the three (3) securing screws from the Fan Module. Ste p Size Quantity Screw T ype CPU Fan M2*3 3[...]
-
Página 85
Chapter 3 75 4. Lift the CPU Fan clear of the Mainboard as shown.[...]
-
Página 86
76 Chapter 3 Removing the CPU IMPORT ANT : The pins on the underside of the CPU are very delicate. If they are damag ed, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed. 1. See “Removing the Therma l Module” on page 72. 2. Using a flat-bladed screw driver , rotate the CPU lockin g screw 180° counter-cloc[...]
-
Página 87
Chapter 3 77 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*6 4 86.N2802.0 02 LCD Panel M2 .5*6 2 86.N2802 .002 LCD Brackets M2*3 6 86.N2802.004 Remove LCD Panel Remove LCD Bezel Remove LCD FPC Cable Remove LCD Panel from Main Unit before proceeding Remove LCD Brackets Remove [...]
-
Página 88
78 Chapter 3 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 55. 2. Remove the two (2) upper and two (2) lower bezel screw caps and screws. 3. S tarting from the bottom edge of t he bezel, pry the bezel upwards an d aw ay from the panel. Work along the right side toward the top of the b ezel, prying the cove rs apart. Continue a[...]
-
Página 89
Chapter 3 79 Removing the Camera Module 1. See “Removing the LCD Bezel” on page 78. 2. Locate the Camera Module at the top of the LCD Module and disconnect the camera cabl e. 3. Remove the Camera from the module.[...]
-
Página 90
80 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Module” on page 79. 2. Remove the two (2) securing screws from the LCD Panel. 3. Remove the adhesive strip holding the cables in place. 4. Remove the Camera cable cluster from the LCD Module as shown. Ste p Size Quantity Screw T ype LCD Panel M2.5*6 2[...]
-
Página 91
Chapter 3 81 5. Lift the LCD Panel clear of the module.[...]
-
Página 92
82 Chapter 3 Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 80. 2. Remove the six (6) securing screws (three on each side) from the LCD Panel brackets. 3. Remove the LCD brackets by pulling away from the LCD Panel. Ste p Size Quantity Screw T ype LCD Brackets M2*3 6[...]
-
Página 93
Chapter 3 83 4. T urn the LCD panel over to expose th e rear . L ift the adhesive protector and disconnect the cable fro m the LCD Panel. 5. Lift the cable as shown to disengage the adhesive strip securing it in place. 6. Lift the FPC cable to disengage the remaining adhesive and remove the cable from the panel.[...]
-
Página 94
84 Chapter 3 Removing the Antennas 1. See “Removing the LCD Panel” on page 80. 2. Remove the adhesi ve strips holding the left ante nna cabl e in place. Ensure the cabl e is free from obstructions. 3. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips. 4. Remove the adhesive tape sec[...]
-
Página 95
Chapter 3 85 5. Lift the left Antenna clear of the cover . 6. Remove the adhesive strips holding the right antenna cable in pla ce. Ensure the cable is free from obstructions. 7. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips.[...]
-
Página 96
86 Chapter 3 8. Remove the adhesive foil securing t he right Antenna to the LCD Module. 9. Lift the right Antenna clear of the cover .[...]
-
Página 97
Chapter 3 87 LCD Module Reassembly Procedure Replacing the Antennas 1. Replace the right Antenna as shown. Ensure that th e locating pins on the Antenna are co rrectly seated. 2. Replace the adhesive foil to secure the Antenna in place. 3. Ru n the cable down th e side of the LCD Module using all available cli ps and adhesive. 4. Run the cable alon[...]
-
Página 98
88 Chapter 3 5. Replace the left Antenna as shown. Ensure that the locatin g pins on the Antenna are correctly seated. 6. Replace the adhesive strip to secure the Antenna in place. 7. Ru n the cable down th e side of the LCD Module using all available cli ps and adhesive. 8. Run the cable along the cable chann el as shown, using all available cable[...]
-
Página 99
Chapter 3 89 9. The Antennas and cables appear as shown when corre ctly installed.[...]
-
Página 100
90 Chapter 3 Replacing the LCD Panel 1. Connect the LCD cable to the panel connector as shown. 2. Press dow n the adhesive strip to secure the cable in place. 3. Run the cable along the back of the panel and press down as indicated to secure the cable in place. 4. Ru n the cable across the back of the panel as shown and press down as indicated to s[...]
-
Página 101
Chapter 3 91 5. Align the LCD brackets with the screw holes on the panel. Replace the si x (6) screws (three o n each side) in the brackets as shown. 6. Place the LCD Panel in the LCD Module, top edge first, and secure the LCD cable with adhe sive tape. IMPORT ANT : Ensure that the LCD power cable passes thro ugh the hinge well and is not trapped u[...]
-
Página 102
92 Chapter 3 Replacing the Camera Module 7. Replace the Camera cable clu ster in the LCD Module. 8. Secure the LCD module with the two (2) securing screws. 1. Place the camer a in the LCD Modu le. 2. Connect the cable to the camera module.[...]
-
Página 103
Chapter 3 93 Replacing the LCD Bezel 1. Replace the bezel and press down until th ere are no gaps between the bezel and the LCD Module. IMPORT ANT : Ensure that the LCD cables pass through th e hinge wells and are not trapped by the bezel.[...]
-
Página 104
94 Chapter 3 2. Replace the four (4) screws and screw caps provided.[...]
-
Página 105
Chapter 3 95 Main Module Reassembly Procedure Replacing the CPU IMPORT ANT : The CPU has a Pin1 locator that must be positi oned corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator . 2. Using a flat-bladed screw driver , rotate the CPU locking screw 180° clockwise to secure [...]
-
Página 106
96 Chapter 3 Replacing the CPU Fan Replacing the Thermal Module IMPORT ANT : Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module. The following thermal grease type s are approved for use: • Silmore GP50 • Honeywell • Jet Motor 7762 The following thermal pads are approved for use: • Eapus[...]
-
Página 107
Chapter 3 97 Replacing the Mainboard 3. Align the screw holes on the Therma l Module and Mainboard then replace the modul e. Keep the module as level as possible to spread the thermal grease evenly . 4. Re place the four (4) securing screws (in numerical order from screw 1 to screw 4) to secur e the Thermal Module in p lace. 1. Ensure that the Main[...]
-
Página 108
98 Chapter 3 Replacing the TouchPad Bracket 1. Replace the T ouchPad bracket top edge first to engage the securing clips. 2. Press the bracket down to engage the securing clips. 3. Replace the two (2) screws to secure the T ouchPad Bracket to the Upper Cover. 4. Replace the T ouchPad FFC and close the locking latch on the connector .[...]
-
Página 109
Chapter 3 99 5. Replace the FF C and press down a s indicated to secure it to the Up per Cover .[...]
-
Página 110
100 Chapter 3 Replacing the Right Speaker Module 1. Place the module left side first on the Upper Cover as shown. Ensure that the left side of the module is seated correctly in the securing clip. 2. Replace the one (1) scre w to secure the mod ule in place. 3. Pass the cable through the Upper C over as shown. 4. T urn the Upper Cover over and run t[...]
-
Página 111
Chapter 3 101 Replacing the Left Speaker Module 1. Place the module right side first on the Upper Cover as shown. Ensure that the right side of the module is sea ted correctly in the securing clip. 2. Replace the one (1) scre w to secure the mod ule in place. 3. Run the cable along the cable channel using all available cable clips. 4. Secure the ca[...]
-
Página 112
102 Chapter 3 Replacing the Power Board Replacing the Upper Cover 1. Slide the Power Board in to the Upper Cover front edge first to engage the securing clip. 2. Press the board down to locate the se curing pin. 3. Replace the two (2) screws to secure the board to the Upper Cover . 1. Place the Upper Cover on the Lower Cover as shown.[...]
-
Página 113
Chapter 3 103 2. Press down around the edges to secure it in place. 3. Replace the nine (9) screws in the Upper Cover as shown.[...]
-
Página 114
104 Chapter 3 4. Replace the three (3 ) screw caps as shown. 5. Connect the following cables to the Mainboard. A B C D[...]
-
Página 115
Chapter 3 105 6. Connect A as shown. 7. Connect C as shown. 8. Connect B and close the locking latch to secure the cable in place. 9. Connect D and close the locking latch to secure the cable in place.[...]
-
Página 116
106 Chapter 3 Replacing the LCD Module 10. T urn the co mputer over and replace the eleven screws as shown. 1. Align the screw holes on the LCD Module and Upper Cover and replace the LCD Module. 2. The left and right screw covers are shaped differently . Ensure that the correct cover is used. 3. Replace the left screw cover as shown. Ensure that th[...]
-
Página 117
Chapter 3 107 4. Replace the right screw cove r as shown. Ensure that the securing tab on the rear of the cover is seated correctly in the Upper Cover . 5. Replace the four (4) screws securing the LCD Module to the Upper Cover. 6. Ensure that the Hinge Covers are replaced correctly . Identify the rear edge of the covers by the two (2) securing clip[...]
-
Página 118
108 Chapter 3 9. Run the black Antenna cable along the cable channel as shown using all available retaining clips. 10. Replace the adhesive strip to secure the cable in place. 11 . Run the white Antenna cable along the cable channel as shown using all available retaining clips. 12. Run the LCD cable along the cable channel using all available cable[...]
-
Página 119
Chapter 3 109 14. S tand the computer o n the LCD Panel and pass the An tenna cables th rough the chassi s. 15. The Upper Cover appears as shown when the Ant enna and LCD cables are correctly installed. 16. T urn the co mputer over . Run the Antenna cables alon g the cab le channel as show n, using all a vailable cable clips.[...]
-
Página 120
11 0 Chapter 3 17. Replace the two (2) screws securing the LCD Module to the Lower Cover .[...]
-
Página 121
Chapter 3 111 Replacing the Keyboard 1. C onnect the Keyboard FFC to the Mainboard and cl os e the locking latch to secure the cable in pl ace. 2. Turn the Keyboard over and in sert it front edge first into the chassis. NOTE: Ensure that the six (6) locating tabs are correctly seated. 3. Press down as indicated to secu re the Keyboard in place.[...]
-
Página 122
11 2 Chapter 3 Replacing the Switch Cover Replacing the Hard Disk Drive Module 1. Place the Switch Cover left side first on to the Upper Co ver . 2. Press down as indicated to snap the Switch Cover into place. 1. Place the HDD in the HDD carrier . 2. Replace the four (4) screws (two each side) to secure the carrier .[...]
-
Página 123
Chapter 3 11 3 3. Insert the HDD, as indica ted and lower it into place. 4. Slide the HDD in the direction of the arrow to connect the interface .[...]
-
Página 124
11 4 Chapter 3 Replacing the WLAN Module Replacing the DIMM Modules 1. Insert the WLAN Module into the WLAN socket. 2. Repl ace the two (2) screws to secure the module. 3. Connect the two (2) An tenna cables to the modu le. NOTE: The black cable connects to the upp er terminal (MAIN) and the white cable to the lower terminal (MAIN). 4. After connec[...]
-
Página 125
Chapter 3 11 5 Replacing the ODD Module Replacing the Lower Covers 1. Press the bezel into the tr ay , bottom edge fi rst, to secure it to the ODD Module. 2. Secure the ODD bracket with the two (2) screws. 3. Push the ODD Module into the ODD bay until it is flush with the casing. 4. Replace the one (1) screw to secure the Module. 1. Replace the Mem[...]
-
Página 126
11 6 Chapter 3 Replacing the SD Dummy Card 3. Replace the three (3) screws to secure the covers in place. 1. Insert the SD Dum my Card into the slot as shown. 2. Push until the ca rd clicks into place and is flush wit h the casing . Memory Cover HDD Cover[...]
-
Página 127
Chapter 3 11 7 Replacing the Battery 1. Slide and hol d the battery rele ase latch to the release po sition (1 ), insert the batter y pack and press down (2). 2. Slide the battery lock in the direction shown to secure the battery in place. 1 2[...]
-
Página 128
11 8 Chapter 3[...]
-
Página 129
Chapter 4 11 9 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. [...]
-
Página 130
120 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llowing actions one at a time to correct the problem. 1. Check the power cable is properly co[...]
-
Página 131
Chapter 4 121 No Display Issue If the Displa y doesn’t work, perform the following actions one at a time to correct the prob lem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem. 1. Make sure that the internal display is selected. On[...]
-
Página 132
122 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 40. 3. If extensive p[...]
-
Página 133
Chapter 4 123 LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the problem. Do not replace a non-defective FRUs:[...]
-
Página 134
124 Chapter 4 TouchPad Failure If the To u c h P a d doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em. Do not replace a non-defective FRUs:[...]
-
Página 135
Chapter 4 125 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager . Check the Device Manager to determine that: • The device is properly installed. • There are no[...]
-
Página 136
126 Chapter 4 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free. 3. Run the Windows OS Startup Rep air Utility: a. insert the Windows[...]
-
Página 137
Chapter 4 127 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits any of the following symptoms it may be faulty: • Audio CDs do not p lay when loaded • DVDs do not play when loaded • Blank discs do not burn cor[...]
-
Página 138
128 Chapter 4 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-click on the device and click Enable . b. Double-click DVD/C D-ROM d rives . If the device displays a down arrow , right-click on the device and click Enable . c. Check that th ere are no yellow excl amation marks against the items in l D E ATA [...]
-
Página 139
Chapter 4 129 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable. Drive Not Detected If Windows cannot detect the drive, perform the foll owing act[...]
-
Página 140
130 Chapter 4 Wireless Function Failure If the WLAN fails, perform th e following actions one at a time to correct th e problem. Do not replace a non - defective FRUs: Thermal Unit Failure If the Thermal Unit fa ils, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs:[...]
-
Página 141
Chapter 4 131 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t the problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connecti on, insert new batteri es and confirm there is a good connection. See the mouse user manual. 3. If the mouse uses a USB connecti on, try an alter[...]
-
Página 142
132 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists. When analyzing an intermittent prob lem, do [...]
-
Página 143
Chapter 4 133 Post Codes These tables describe the POST code s and descriptions durin g the POST . Code Beeps POST Routine Description 02h V erify Real Mode 03h Disable Non-Maskable Interrupt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize chipset with initial POST values 09h Set IN POST flag 0Ah Initialize CPU registers 0Bh En[...]
-
Página 144
134 Chapter 4 45h POST device initialization 46h 2-1-2-3 Check ROM copyright notice 48h Check video con figuration agai nst CMOS 49h Initialize PCI bus and devices 4Ah Initialize all video adapters in system 4Bh QuietBoot start (optional) 4Ch Shadow video BIOS ROM 4Eh Display BIOS copyright noti ce 50h Display CPU type and speed 51h Initialize EISA[...]
-
Página 145
Chapter 4 135 8Ah Initialize Extended BIOS Data Area 8Bh T est and initialize PS/2 mouse 8Ch Initialize floppy controller 8Fh Determine number of A T A drives (optional) 90h Initialize hard-disk controllers 91h Initialize local-bus hard-disk controllers 92h Jump to UserPatch2 93h Build MPT ABLE for multi-processor boards 95h Install CD ROM for boot[...]
-
Página 146
136 Chapter 4 * If the BIOS detect s error 2C, 2E, or 30 (base 512K RAM error), it di splays an additional word-bitmap (xxxx) indicating the address line or bits that failed. For ex ample, "2C 0002" means addres s line 1 (bit one set) has failed. "2E 1020" mean s data bits 12 and 5 (bits 12 and 5 set) have failed in the lower 16[...]
-
Página 147
Chapter 5 137 Jumper and Connector Locations Top View Item Description JL VDS1 LCD Connector JP14 Power/B Connector JSPK1 S peaker(Left) Connector JSPK2 S peaker(Right) Connector JKB1 Internal Keyboard Connector JTP1 T ouch Pad Connector U18 South Bridge SW2 T ouch p ad (Lef t) Button SW3 T ouch pad (Right) Button Chapter 5[...]
-
Página 148
138 Chapter 5 Bottom View ITEM DESCRIPTION PJP1 AC-IN Connector JRJ1 RJ45 Connector JC RT1 CRT Con n ec to r JP12 Fan Connector JUSB1 USB Connector JUSB2 USB Connector JMIC1 MIC-In Jack JHP1 Head-Phone Jack JSA T A2 HDD Connector U39 North Bridge JCPU1 CPU Socket JREAD1 Card Reader Socket PJP2 Battery Connector JDIMM2 Memory DIMM2 Connector JDIMM1 [...]
-
Página 149
Chapter 5 139 Power Board ITEM DESCRIPTION U1 Lid Switch SW1 TP Lock Button SW2 ON/OFF Button SW3 W ireless Button LED1 ON/OFF LED LED3 Media LED LED4 Num LED LED5 Wireless LED LED6 Caps LED LED7 TP Lock LED[...]
-
Página 150
140 Chapter 5 Clearing Password Check and BIOS Recovery This section provides you with the st and ard operating procedures of clearing password and BIOS reco very for Aspire 5532. The machine provides one Hardware Open Gap on mai n board for clearing password check, and one Hotkey for enabling BIOS Recovery . Clearing Password Check Steps for Clear[...]
-
Página 151
Chapter 5 141 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed. BIOS Recovery Hotkey: The system [...]
-
Página 152
142 Chapter 5[...]
-
Página 153
Chapter 6 143 FRU (Field Replaceable Unit) List This chapter gives you the FRU (F ield Repl aceable Unit) list ing in global configurations of Aspire 5532. Refer to this chapte r whenever ordering for parts to repair or fo r RMA (Return Merchan dise Authorization). Please note that WHEN ORDERING FRU P ARTS, you should c heck the most up-to-date inf[...]
-
Página 154
144 Chapte r 6 Aspire 5532 Exploded Diagrams Main Assembly 1 2 3 4 5[...]
-
Página 155
Chapter 6 145 No. Description Acer P/N 1 Middle Cover Assy 60.PG T02.002 2 Hinge Cap Assy 42.N2802.001 3 Upper Case Assy 60.PG T02.001 4 Mainboard MB.PGY02.001 5 Lower Case 60.N2802.002[...]
-
Página 156
146 Chapte r 6 Base Assembly No. Descriptio n Acer P/N 1 Fan 23.N2802.001 2 Thermal Module 60.N6502.001 3 Mainboard MB.PGY02.001 1 2 3[...]
-
Página 157
Chapter 6 147 Rear Assembly No. Descriptio n Acer P/N 1 RAM Door 42.N2802.004 2 HDD Door 42.N2802.005 3 Lower Case 60.N2802.002 3 1 2[...]
-
Página 158
148 Chapte r 6 Aspire 5532 FRU List CA TEGOR Y Description AcerPN Board POWER BOARD 55.N2802.001 WLAN CARD-XB6 3 NI.23600.007 WLAN CARD-BC M4312 NI.2 3600.029 Cable TP FFC 50.N2802.001 POWER CORD US 3 PIN 27.T A VV5.001 POWER CORD EU 3 PIN 27.T A VV5.002 POWER CORD AUS 3 PIN 27.T A VV5.003 POWER CORD UK 3 PIN 27.T A VV5.004 POWER CORD CHINA 3 PIN 2[...]
-
Página 159
Chapter 6 149 LOWER CASE 60.N2802.002 TP BRACKET 33.N2802.001 MIDDLE COVER ASSY -AS 60.PG T02.002 HINGE CAP ASSY 42.N2802.001 UP CAP R-AS 42.PG T02.001 UP CAP L-AS 42.PG T02.002 RAM DOOR ASSY 42.N2802.004 HDD DOOR ASSY 42.N2802.005 CA TEGOR Y Description AcerPN[...]
-
Página 160
150 Chapte r 6 HDD HDD SEAGA TE 2.5" 5400rpm 160GB ST9160310AS Crockett SA T A LF F/W:0303 KH.16001.034 HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra SA T A LF F/W : FG01 1J KH.16004.006 HDD HGST 2.5" 5400rpm 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C KH.16007.019 HDD WD 2.5" 5400rpm 160GB WD1600BEVT-22ZCT O ML160 SA T A[...]
-
Página 161
Chapter 6 151 ODD BEZEL-SUPER MU L TI 42.N2802.006 ODD BRACKET 33.N2802.003 Keyboard Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 99KS Black US International T exture KB.I170A.140 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 99KS Black Greek T exture KB.I170A.125 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 99KS Black Arabic T exture KB[...]
-
Página 162
152 Chapte r 6 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black Nordic T exture KB.I170A.129 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black FR/ Arabic T exture KB.I170A.122 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black US w/ Canadian French T exture KB.I170A.142 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tanda[...]
-
Página 163
Chapter 6 153 LCD CABLE FOR W/CCD F 50.N28 02.005 LCD BRACKET R&L FOR LC D 33.N2802.004 CAMERA 0.3 57.N2802.001 INVERTER 19.N2802.001 ANTENNA-MAIN+MIMO 50.N2802.004 LCD BEZEL FOR W/O CCD AS 60.PEE02.003 LED CABLE FOR W/O CCD F 50.N3202.001 Mainboard Mainboard AS5532 A TI R S780 SB710 8132 W /O 1394 V1.0 LF MB.PGY02.001 Memory Memory NANY A SO-D[...]
-
Página 164
154 Chapte r 6 Speaker SPEAKER R 23.N2802.002 SPEAKER L 23.N2802.003 Miscellaneous NAME PLA TE-AS5532 40.PGX02.002 Description AcerPN Screw List SCREW M2.48D 4.0L K 5. 5D 0.8T ZKNL 86.N2802.001 SCREW M2.48D 6.0L K 5. 5D 0.8T ZKNL 86.N2802.002 SCREW M2.45D 8.0L K 5. 5D 0.8T ZKNL 86.N2802.003 SCREW M1.98D 3.0L K 4. 6D 0.8T ZKNL 86.N2802.004 SCREW M M[...]
-
Página 165
Chapter 6 155[...]
-
Página 166
Appendix A 156 Model Definition and Configuration Model RO Country Acer Part No Description CPU AS5332- 903G16Mn EMEA Denmark LX.PGV02.009 AS 5332-903 G16Mn W7HP64A TDK2 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_ENS1 CM900 AS5332- 903G16Mn EMEA Hol land LX.PGV02.01 7 AS5332-903G16Mn W 7HP64A TNL1 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_NL[...]
-
Página 167
157 Appendix A AS5332- 302G25Mn P A Chile LX.PGV08.00 6 AS5332-302G2 5Mn EM W7ST32EMA TCL3 MC UMACbs2 2*1G/250/6L2.2/5R/ CB_bgn_0.3D_HG_ES51 CMT3000 AS5332- 302G25Mn PA A C L A - S panish LX.PGV08.005 AS5332-302G2 5Mn EM W7ST32EMA TEA4 MC UMACbs2 2*1G/250/6L2.2/5R/ CB_bgn_0.3D_HG_EN31 CMT3000 AS5332- 302G25Mn PA A C L A - S panish LX.PGV08.004 AS53[...]
-
Página 168
Appendix A 158 AS5332- 304G32Mn EMEA UK LX.PGV02.045 AS5332-304G32Mn W7HP64A TGB1 MC UMACbs2 2*2G/320/6L2.2/5R/ CB_bgn_0.3D_HG_EN1 1 CMT3000 AS5332- 902G16Mn EMEA Midd le East LX.PGV0C.01 1 AS5332-902G16Mn LINPUSAME2 UMACbs2 1*2G/160/6L2.2/5R/ CB_bgn_0.3D_HG_EN13 CM900 AS5332- 901G16Mn EMEA Eastern Europe LX.PGV0C.008 AS5332-901 G16Mn LINPUSAEU7 UM[...]
-
Página 169
159 Appendix A AS5332- 903G16Mn EMEA Sp ain LX.P GV02.010 AS 5332-903G1 6Mn W7HP64A TES1 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_ES51 CM900 AS5332- 903G16Mn EMEA Eastern Europe LX.PGV02.013 AS5332-903G1 6Mn W7HP64A TEU5 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_RO1 1 CM900 AS5332- 903G16Mn EMEA Hungary LX.PGV02. 01 1 AS5332-903G1 6Mn W7HP[...]
-
Página 170
Appendix A 160 AS5332- 903G16Mn EMEA South Afri ca LX.PGV02. 039 AS5332-903G16Mn EM W7HP64EMA TZA4 MC UMACbs2 2G+1G/160/6L2.2/5R/ CB_bgn_0.3D_HG_ES61 CM900 AS5332- 903G16Mn EMEA Eastern Europe LX.PGV02.020 AS5332-903G1 6Mn W7HP64A TEU7 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_SL1 1 CM900 AS5332- 903G16Mn EMEA Midd le East LX.PGV02.041 AS5332-9[...]
-
Página 171
161 Appendix A AS5332- 903G32Mn EMEA Eastern Europe LX.PGV0C.010 AS5332-903 G32Mn LINPUSAEU7 UMACbs2 2G+1G/320/6L2.2/5R/ CB_bgn_0.3D_HG_ENQ1 CM900 AS5332- 902G16Mn EMEA Midd le East LX.PGV0Y .004 AS5332-902 G16Mn EM VHB32A TME2 MC UMACbs2 1*2G/ 160/6L2.2/5R/ CB_bgn_0.3D_HG_AR23 CM900 AS5332- 901G16Mn EMEA Midd le East LX.PGV0C.003 AS5332-901 G16Mn [...]
-
Página 172
Appendix A 162 AS5332- 303G16Mn EMEA UK LX.PGW02.002 AS5332-303G16Mn W7HP64A TGB1 MC UMAbs2 2G+1G/160/6L2.2/5R/ CB_bgn_HG_EN1 1 CMT3000 AS5332- 303G50Mn EMEA UK LX.PGW02.004 AS5332-303G50Mn W7HP64A TGB1 MC UMAbs2 2G+1G/500_L/6L2.2/5 R/ CB_bgn_HG_EN1 1 CMT3000 AS5332- 903G25Mn EMEA UK LX.PGW02.003 AS5332-903G25Mn W7HP64A TGB1 MC UMAbs2 2G+1G/250/6L2[...]
-
Página 173
163 Appendix A AS5332-903G16Mi N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-902G16Mn N15.6WXGAG UMA N SO2GBII6 N AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-304G32Mn N15.6WXG AG UMA N SO2GBII6 SO2GBII6 AS5332-902G16Mn N15.6WXGAG UMA N SO2GBII6 N AS5332-901G16Mn N15.6WXGAG UMA N SO1GBII6 N AS5332-902G25Mn N15.6WXGAG UMA N SO2GBII6 N AS5[...]
-
Página 174
Appendix A 164 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G32Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-902G16Mn N15.6WX[...]
-
Página 175
165 Appendix A AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-902G25Mn N25 0GB5.4KS N NSM8XS N AS5332-902G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn[...]
-
Página 176
Appendix A 166 AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn[...]
-
Página 177
167 Appendix A AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-902G16Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-902G16Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-902G16Mn N[...]
-
Página 178
Appendix A 168 AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd Wi[...]
-
Página 179
169 Appendix A AS5332-903G25Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-303G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-304G32Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-572G16Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N Model Extra SW1 Card Reader Wireless LAN1 Bluetooth[...]
-
Página 180
Appendix A 170[...]
-
Página 181
Appendix B 171 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of its system functions are tested under Windows ® Vista and Windows ® 7 environments. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests. Regardin[...]
-
Página 182
172 Appendix B Microsoft ® Windows ® OS Environment Test V end or Ty p e Descr iption Adapter DEL T A 65W Adapter DEL T A 65W 19V 1.7x5.5x1 1 Y ellow ADP-65JH DB A, L V5 LED LF LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ello w P A-1650- 22AC L V5 LED LF HIPRO 65W Adapter HIPRO 65W 19V 1.7x 5.5x1 1 Y ellow HP-A0652R3B 1LF , L V5 LED LF DEL [...]
-
Página 183
Appendix B 173 SIMPLO 6CELL2.2 Battery SIMPLO AS-2009A Li-Ion 3S2P LGC 6 cell 4400mAh Main COMMON LGC 2.2Ah(S3 ) SIMPLO 6CELL2.2 Battery SIMPLO AS-20 09A Li-Ion 3S2P SAMSUNG 6 cell 4400mAh Main COMMON SDI 2.2Ah(F ) SANYO 6CELL2.2 Battery SANYO AS-2 009A Li-Ion 3S2P SANYO 6 cell 4400mAh Main C OMMON 2.2Ah(A) SONY 6CELL2.2 Ba ttery SONY AS-2009A Li-I[...]
-
Página 184
174 Appendix B P ANASONIC 6CELL2.2 Battery P ANASONIC AS-2009A Li-Ion 3S2P P ANASONIC 6 cell 4400mAh Main COMMON 2.2Ah(CG ) SAMSUNG 6CELL2.2 Battery SAMSUNG AS-2 009A Li-Ion 3S2P SAMSUNG 6 cell 4400mAh Main C OMMON 2.2Ah(F) SIMPLO 6CELL2.2 Battery SIMPLO AS-20 09A Li-Ion 3S2P P ANASONIC 6 cell 4400mAh Main COMMON Panasonic 2.2Ah ( CG ) SIMPLO 6CELL[...]
-
Página 185
Appendix B 175 INTEL PMDT4300 C PU Intel Pentium Dual-Core T4300 PGA 2.1G 1M 800 R-0 INTEL PMDT4400 C PU Intel Pentium Dual-Core T4400 2.2G 1M 800 INTEL PMDT4200 C PU Intel Pentium Dual-Core T4200 PGA 2.0G 1M 800 35W R-0 no VT INTEL PMDT4300 C PU Intel Pentium Dual-Core T4300 PGA 2.1G 1M 800 R-0 INTEL PMDT4400 C PU Intel Pentium Dual-Core T4400 2.2[...]
-
Página 186
176 Appendix B HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS545016B9A300 Panther B SA T A LF F/W:C60F WD N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD1600BEVT -22ZCTO ML160 SA T A LF F/W:1 1.01A1 1 SEAGA TE N2 50GB5.4KS HDD SEAGA TE 2.5" 540[...]
-
Página 187
Appendix B 177 SEAGA TE N3 20GB5.4KS HDD SEAGA TE 2.5" 5400rpm 320GB ST9320320AS Crockett SA T A LF F/W:0303 TOSHIBA N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB MK3255GSX Lib ra SA T A LF F/W:FG01 1J HGST N320GB5.4KS HDD HGST 2.5" 5400rp m 320GB HTS545032B9A300 Panther B SA T A LF F/W: C60F WD N320GB5.4KS HDD WD 2.5" 5400rpm 320G[...]
-
Página 188
178 Appendix B TOSHIBA N160GB5.4KS HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Lib ra SA T A LF F/W: FG01 1J HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS545016B9A300 Panther B SA T A LF F/W:C60F WD N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD[...]
-
Página 189
Appendix B 179 WD N250GB5.4KS HDD WD 2.5" 5400rpm 250GB WD2500BEVT -22ZCT0 ML160 SA T A LF F/W:1 1.01A1 1 SEAGA TE N3 20GB5.4KS HDD SEAGA TE 2.5" 5400rpm 320GB ST9320320AS Crockett SA T A LF F/W:0303 TOSHIBA N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB MK3255GSX Lib ra SA T A LF F/W:FG01 1J HGST N320GB5.4KS HDD HGST 2.5" 5400rp m [...]
-
Página 190
180 Appendix B AUO N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LF 220nit 8ms 500:1 SAMSUNG N15.6WXGAG CCFL LCD SAMSUNG 15.6"W WXGA Glar e L TN156A T01- A01 LF 220nit 8ms 600:1 LPL N15.6WXGAG CCFL LCD L PL 15.6" WXGA Glare LP156W H1-TLA1 LF 220nit 8ms 400:1 LPL N15.6WXGAG CCFL LCD LPL 15.6"W WXGA Gl are LP156WH1-TLA3[...]
-
Página 191
Appendix B 181 HYNIX SO2GBII6 Memo ry HYNIX SO-DIMM DDRII 667 2GB HMP125S6EFR8C-Y5 LF 128*8 0.055u m NANY A SO1GBII6 Memory NANY A SO-DIMM DDRII 667 1GB NT1G T64UH8D0F N-3C LF 64*16 0.07um MICRON SO1GBII6 Memory MICR ON SO-DIMM DDRII 667 1GB MT8HTF12864HDY -667G1 LF 64*16 0.065um SAMSUNG SO1GBII6 Memory SAMS UNG SO-DIMM DDRII 667 1GB M470T2864EH3-C[...]
-
Página 192
182 Appendix B NANY A SO1GBII6 Memory NANY A SO-DIMM DDRII 667 1GB NT1G T64UH8D0F N-3C LF 64*16 0.07um MICRON SO1GBII6 Memory MICR ON SO-DIMM DDRII 667 1GB MT8HTF12864HDY -667G1 LF 64*16 0.065um SAMSUNG SO1GBII6 Memory SAMS UNG SO-DIMM DDRII 667 1GB M470T2864EH3-CE6 LF 64*16 0.0 55um HYNIX SO1GBII6 Memo ry HYNIX SO-DIMM DDRII 667 1GB HYMP1 12S64CP6[...]
-
Página 193
Appendix B 183 HLDS NSM8XS ODD HLDS Super-Multi DRIVE 12.7mm Tray DL 8X G T20N LF W/O bezel SA T A SONY NSM8XS ODD SONY Super-Multi DRIVE 12.7mm T ray DL 8X AD- 7580S LF W/O bezel SA T A PLDS NSM8XS ODD PLDS Super-Multi DRIVE 12.7mm Tray DL 8X DS- 8A3S LF W/O bezel SA T A P ANASONIC NSM8XS O DD P ANASONIC Super -Multi DRIVE 12.7mm T ray DL 8X UJ880[...]
-
Página 194
184 Appendix B AMD M92XT AMD M92XT 55nm 23mm*23mm S2 package AMD M92XT AMD M92XT 55nm 23mm*23mm S2 package None UMA UMA (Intel ) None UMA UMA (Intel ) VRAM 512M- DDR2(64*16*4) 512M-DDR2 64*16*4 512M- DDR2(64*16*4) 512M-DDR2 64*16*4 NB Chip set INTEL GL40 (A1) NB Chipset Intel CS GL40NB A1 INTEL GL40 (A1) NB Chipset Intel CS GL40NB A1 INTEL GM4 5 NB[...]
-
Página 195
Appendix B 185 WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A Audio Codec Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Re[...]
-
Página 196
186 Appendix B McAfee An tivirus application McAfee McAfee An tivirus application McAfee McAfee An tivirus application McAfee Wireless LAN Foxconn 3rd W iFi 1x2 BGN Foxconn Wireless LAN Athe ros HB93 1x2 BGN (HM) Foxconn 3rd W iFi 1x2 BGN Foxconn Wireless LAN Athe ros HB93 1x2 BGN (HM) Foxconn 3rd W iFi 1x2 BGN Foxconn Wireless LAN Athe ros HB93 1x[...]
-
Página 197
Appendix C 187 Online Support Information This section describe s online techni cal support servic es available to hel p you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Unit s may access our website. However[...]
-
Página 198
188 Appendix C[...]
-
Página 199
189 A AFLASH Utility 31 Antennas Removing 84 Replacing 87 B Battery Replacing 117 Battery Pack Removing 42 BIOS ROM type 17 vendor 17 Version 17 BIOS Utility 23–31 Boot 29 Exit 30 Navigating 23 Onboard Device Configur ation 27 Save and Exit 30 Security 26 System Security 30 Board Layout Top View 137 brightness hotkeys 14 C Camera Module Removing [...]
-
Página 200
190 Removing 78 Replacing 93 LCD Brackets Removing 82 Replacing 90 LCD Cable Replacing 90 LCD Failure 123 LCD Module Removing 55 Replacing 106 LCD Module Disassembly Flowchart 77 LCD Module Reassembly Procedure 87 LCD Panel Removing 80 Replacing 90 Left S peaker Module Removing 64 Lower Covers Removing 44 Replacing 115 M Main Unit Disassembly Flowc[...]
-
Página 201
191 T ouchPad Br acket Removing 68 Replacing 98 T ouchPad Failure 124 T roublesho oting Built-in KB Failure 123 EasyTouch Buttons 130 HDTV Switch 131 Internal Speakers 124 LCD Failure 123 No Display 121 ODD 127 Other Failures 131 Power On 120 Thermal Unit 130 TouchPad 124 WLAN 130 U Undetermined Problems 132 Upper Cover Removing 59 Replacing 102 ut[...]
-
Página 202
192[...]