Acer S1383WHne manual

Acer Projector S1383WHne/T420DTB/XS-W30HGM/ F1383WHne/S1283Hne/T410DTB/ XS-X30HGM/F1283Hne/S1283e/ T410B/XS-X30M/DNX1322/F1283e/ S1283/T410/XS-X30 Series User's Guide[...]

Changes may be made peri odically to the infor mation in this publication without obligation to notify any person o f such revisions o r change s. Su ch chan ges will b e incorp orated in new editions of this manual or supplementary documents and publ ications. This company makes no representations or warra nties, either expre ssed or implied, with[...]

iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liq uid cleaners or aerosol cleaners. Use a dam p cloth for [...]

iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices, lamp. Using electrical power • This product should be operated from [...]

v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: • the power cord or plug is dam aged, [...]

vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire. • When switching the projector off, suggest to ensure the projector completes [...]

vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended pe riods. • Do not increase the volu me to block out noisy s urrou[...]

viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and open ings on the unit prov ided for ventilatio[...]

Information for your safety and comfort iii First things first viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 5 Remote Control Layout 6 MHL (Mobile High-Defin ition Link) Control 8 Getting Started 9 Connecting the Projec tor 9 Turning the Proj ector [...]

Control Panel 31 Network Setting 32 Alert Setting 32 Logout 33 Appendices 34 Troubleshooting 34 LED & Alarm Definition Listing 38 Cleaning a nd replaci ng the d ust filters 39 <<Type I>> 39 <<Type II>> 40 Replacing th e Lamp 41 Ceiling Mount Install ation 42 Specification s 45 Compatibility modes 48 Regulations and safet[...]

1 English Introduction Product Features This product is a single-chip D LP ® projector. Outstanding features inclu de: • DLP ® technology • S1283Hne/T410DTB/XS-X30HGM/F 1283Hn e/S1283e/T410B/XS-X30M/ DNX1322/F1283e/S1283/T410/XS-X30 series: Tru e XGA 1024 x 768 resolution S1383WHne/T420DTB/XS-W30HGM/F1 383W Hne series: True WXGA 1280 x 800 re[...]

2 English Package Overview This projector comes with all the i tems shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable 2 x Batteries (option) Security ca rd User’s guide Quick start guide Carrying case (option) Dust filters (option) Remote control SmartPen[...]

3 English Projector Overview Projector Outlook Front / upper side # Description # Description 1 Power button 5 Remote control receiver 2 Control panel 6 Projection lens 3 Lamp cover 7 Tilt adju sting wheels 4 Focus ring 8 Lens cap 4 3 6 5 7 2 1 8[...]

4 English Right / Rear side Note: Functions vary depending on mod el definition. # Description # Description 1 Composite video input connector 8 3.5mm Microphone Input 2 S-Video input connector 9 LAN (R J45 Port for 10/100M Ethernet) 3 Monitor loop-through output connector (for VGA IN 2 only) 10 RS232 connector 4 PC analog signal/HDTV/component vid[...]

5 English Control Panel # Icon Function Description 1 POWER Power Indicator LED 2 LAMP Lamp Indica tor LED 3 TEMP Temp Indicator LED 4 RESYNC Automatically synchronizes the proje ctor to the input source. 5 SOURCE Changes the active source. 6 POWER See the contents in "Turning the Projector On/Off" section. 7 Mode Press " Mode "[...]

6 English Remote Control Layout # Icon Function Description 1 Infrared transmitte r Sends signals to the projecto r. 2 POWER Refer to the " Turning the Projector On/Off " section. 3 3D Press "3D" to selec t 3D models. 4 SOURCE Changes the active s ource. 5 MODE Press "MODE" to select the display mode from Bright, Prese[...]

7 English Note: Functions vary depending on mod el definition. 13 Four directional select keys Use up, down, left, right buttons to select it ems or make adjustments to your sele ction. 14 Pre./Rewind No function. Enter/ Play/ Pause No function. Back/Stop No function. Next/Fast forward No function. 15 KeyPad 0~9 Press " 0~9 " to input a p[...]

8 English MHL (Mobile High-Definition Link) Control # Icon Component Description 1M O D E • Press "MODE" button for one second to activate the MHL Control Mode. • To exit, press t he "MODE" button again. 2 SOURCE Press the "SOURCE" button to t oggle between Navigation or Numeric mod e. 3 MENU Press to launch t he r[...]

9 English Getting Started Connecting the Projector 1 D-Sub D-Sub 2 RS232 RS232 9 RS232 HDTV adapter 4 5 RB G RBG D-Sub D-Sub 2 USB USB 10 HDMI HDMI 11 HDMI 12 USB MHL 6 Y Y 7 R W 8 R W 8 R W 8 3 13 / MHL S-VIDEO MIC AUDIO IN AUDIO OUT VGA OUT VGA IN 2 VGA IN 1 USB CTRL RS232 VIDEO S-Video output Video output DVD player, Set-top Box, HDTV receiever [...]

10 English Note: To ensure the projector work s well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Functions vary depending on mod el definition. Note: USB cable needs powered extender if the length is over 5 m. Note: VGA OUT loops through for VGA IN 2 only. Note: Some smartphones requir[...]

11 English Turning the Projector On/Off Turning on the Projector 1 Ensure that the power cord and sign al cable are securely connected. The Power indicator LED will flash red. 2 Turn on the p rojector by pressing " Power " button on the control panel or remote control, and the Power indicator LED will turn blu e. 3 Turn on your sou rce (c[...]

12 English Turning the projector off 1 To turn the projector off, press and hold the power button. This message appears: "Please press the power button ag ain to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and b link rapidly after the projector is turned off, and the fan(s) will co[...]

13 English Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with ele vator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel[...]

14 English How to optimize image size and distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a desired distance from the screen. • XGA series If the projector is 1.0 m from the screen, good im age quality is possible for image sizes around 80". Note: Remind as below figure, the sp[...]

15 English • WXGA series If the projector is 1.0 m from the sc reen, good image qua lity is possible for image sizes around 89". Note: Remind as below figure, the space of 135 cm height is required when located at 1.0 m distance. Desired Distance (m) <A> Screen size Top (Min zoom) Diagon al (in ch) <B> W (cm) x H ( cm) From base [...]

16 English User Controls Installation menu The installation menu provides an on screen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adju stments for screen size and distance, focus, keystone correction and mor[...]

17 English Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control or control panel. • When the OSD is displayed, use the keys to select any item in the main menu. After sele[...]

18 English Color Display Mode There are many factory pr esets optimized for various types of images. • Bright: For brig htness optimizati on. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing vi deo in a bright environm ent. • Education: For education environment. • User: Memorize user&ap[...]

19 English Note: "Saturation" a nd "Tint" functions ar e not supported under compu ter or HDMI mode. Note: Constant Brightness is ava ilable while both of "Dynamic Bl ack" and "ECO Mo de" are off. Note: Functions vary depend ing on model defin ition.[...]

20 English Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the ima ge so you ca n project from behind a trans lucent screen. • Rear-Ceiling: When you select t his function, th e projector reverses and i nverts the image at same time . You can project from beh[...]

21 English Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "HDMI Color Range" and "HDMI Scan I nfo" functions are onl y supported under HDMI mode. Note: Functions vary depend ing on model defin ition. HDMI Scan Info[...]

22 English Setting SmartPen The Acer Smar tPen can work in plac e of your regular computer mouse. Just hold the p en in your hand, and point it at the projected image to point, clic k, and drag. It gives you more flexibility to o perate your computer without standing next to it. Pen Func tion To use the Acer SmartPen, select "On" to acti [...]

23 English Source Lock When Source Lock is turned "Off", the projector will search for other signals if the current input signal is lost. When Source Lock is turned "On", it wil l "lock" the c urrent source channel unless you press "Sourc e" button on th e remote control for the next channel. Closed Caption S[...]

24 English Note: Functions vary depend ing on model defin ition. User Password • Press to setup or change the "User Pa ssword". • Press number keys to set your pass word on the remote control and press "MENU" to c onfirm. • Press to delete character . • Enter the password when you see "Confirm Password" display[...]

25 English About Acer SmartPen Setting Note 1: Preparations 1. Turn off the projector by pressing the Power button. 2. Use a scre wdriver to rem ove the sc rew from the cover. (I llustration #1) Push up and remove the cove r. (Illustration #2) Plug the PB dongle int o the PB dongle slot on the p rojector. (Illustration #3) Reverse the above steps. [...]

26 English 5. For “Dual Pen” mode to work correctly you must have two smart pens and the NXBoard software installed after selecting "Enable" in Dual Pen menu.[...]

27 English Management Note: "Constant Brightness" is available while both of "Dynamic Black" and "ECO Mo de" are off. Note: You have to perf orm “Lamp Hour Rese t” after replacing with new lamp; otherwise, "Constant Bri ghtness" cannot be activated. Note: Functions vary depend ing on model defin ition. EC[...]

28 English Audio Note: Functions vary depend ing on model defin ition. Volume • Press to decrease the volume. • Press to incr ease the volume. Microphone/Audio In Adjust the volume from "MIC" or "Audio In" connector. Mute • Choose "On" to mute the volume. • Choose "Off" to restore the volume.[...]

29 English 3D Note : It needs correct se ttings on graphic card 3D appl ication pro gram for correct 3D display. Note: The SW players, such as Stereosc opic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - Stereo scopic Pl ayer (T rial): http://www.3dtv.at/Downloads/Index_en.a[...]

30 English Acer LAN webpage management How to login in Open browser and enter the Server IP address by 192.168.1 00.10 to find below homepage of acer LAN web page management. A password is n eeded to login in before using. Select a user. Administrator is with hig h authority that can process more operations such as network setting and alert setting[...]

31 English Home Home page shows conn ection status and you can find three main functions listed, Control Panel , Networking Setting and Alert Setting . Note: Control Panel and Networking Se tting are only for Ad ministrator account. Control Panel Enduser can c ontrol and ad just projec tor sett ing value via this page.[...]

32 English Network Setting Enduser can set IP address, group name and password as wish. After change network co nfigurati ons or password , proj ector will reboot automatically after press "Apply". Note: Group Name and project or Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if pro[...]

33 English Logout After tap Logout, you will return to login page within 5 sec onds. Note: Functions vary depend ing on model defin ition.[...]

34 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center. Image Problems and Solu tions # Problem Solution 1 No image appears onscreen • Connected as described in the "Getting Starte[...]

35 English 3 Pa rtial, sc rolling or incorrectly displayed image (For notebooks) • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [F[...]

36 English 9 Image is too small or too large • Adjust the z oom lever on th e top of the proj ector. • Move the projector closer to or further from the screen. • Press "MENU" on the remote contr ol. Go to "Image - -> Aspect Ratio" and try d ifferent setting s or press "RATIO" on the remote cont rol to adjust d[...]

37 English OSD Messages Problems with the Projector # Condition Message Rem inder 1 Message • Fan Fail - the system fan i s not working. • Pr ojector Overheated - the projector has excee ded its recommended operating temperature and must be allowed to cool down before it may be used. Pleas e check the followin g message. Please also check the d[...]

38 English LED & Alarm Definition Listing LED Messages Message Lamp_LED Temp_ LED Power LED Red Red Red Blue Input power plug Flash ON to OFF 100ms Flash ON t o OFF 100ms Flash ON to OFF 100ms -- Standby -- -- ON -- Power button ON -- -- -- ON Lamp retry -- -- -- Quick Flashing Power off (Cooling state ) -- -- Quick Flashing -- Power button OFF[...]

39 English Cleaning and replacing the dust filte rs <<Type I>> Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can beco me clogged with dust, prev enting proper ventilation . This can cause overheating and da mage the projector. Follow these steps: 1 Turn the pr[...]

40 English <<Type II>> Replacing the d ust shield pack Follow these steps: Replacing the 3D dust fi lter 1 Turn the projector off. Wait for th e Power LED to stop flashing then unplug the power cord. 2 Allow the projector at least 30 mins to coo l down. 3 Use a screwdriver to remove the scre w from the 3D dust filter. (Illustration #1) [...]

41 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message " Lamp is approach ing the end of its useful life in full po wer operation. Replacement suggested! " When you see this message, change the lamp as s[...]

42 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appr opriate screws for your type of ceiling. 2 Secure the ceiling ro[...]

43 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution. Use two washers fo r extra support, if deemed necessary. 4 Attach the ceiling bracket to[...]

44 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each mo del is listed in the table below. 4 mm diameter screws are encl osed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 42 5 V V Tightening Screw Allen Key Tightening Screw Allen Key 85.00 mm 55.00 m[...]

45 English Specifications The specifications listed below are subjec t to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection syst em DLP ® Resolution • S1283Hne/T410DTB/XS- X30HGM/F1283Hne/S1283e/ T410B/ XS-X30M/DNX1322/S1283/T 410/XS-X30 series: Tr ue XGA 1024 x 768 re solution •[...]

46 English Horizont al scan rat e • S1283Hne/T410DTB/XS- X30HGM/F1283Hne/S1283e/ T410B/XS-X30M/DNX1322/F12 83e/S1283/T410/ XS-X30 series: 15 - 100 kHz • S1383WHne/T420DTB/XS-W30HGM/F1383WHne series:15 - 102 kHz Vertical refresh scan rate 24 - 120 Hz Lamp type 210W user-replaceable l amp Keystone corre ction ± 40 degrees Audio Internal speaker [...]

47 English Note: Design and specifications are subje ct to change without notice. HDMI X X X Mini U SB x1 (f or firmware upgrade) VV V Microphone Input V V V I/O connecto rs S1283e/T410B/XS-X30M/ S1283/T410/XS-X30 S1283Hne/T410DTB/ XS-X30HGM/ F1283Hne S1383WHne/T420DTB/ XS-W30HGM/ F1383WHne[...]

48 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 SVGA 80 0x600 56 35.2 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 (RB) 76.3 XGA 102 4x768 60 48.4 1024x768 70 5[...]

49 English 2 VGA Analog - Extended Wide timing 3 VGA Analog -Component Signal B. HDMI Digital (*) 1 HDMI - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.8 1280x768 75 60.3 1280x768 85 68.6 1280x720 60 45.0 1280x720 120 92.9 1280x800 60 49.7 *1280x800 120 101.6 1440x900 60 55.9 WSXGA+ 1680x105 0 60 65.3 1920x1080 [...]

50 English 2 HDMI - Extended Wide timi ng 640x480 85 43.3 640x480 120 61.9 SVGA 80 0x600 56 35.2 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 (RB) 76.3 XGA 102 4x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 (RB) 97.6 SXGA 1152x864 70 63.8 1152x864 75 67.5 1152x864 85 77.1 1280x1024 60 64[...]

51 English 3 HDMI - Vide o Signal 4 HDMI - 1.4a 3D Timi ng 1440x900 60 55.9 WSXGA+ 1680x105 0 60 65.3 1920x1080 (1080P) 60 67.5 1366x768 60 47.7 WUXGA 1920x1200-RB 60 (RB) 74.0 Modes Resolution V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94 (29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3[...]

52 English C. MHL Digital (*) Note: * Functions vary depending on model definition. 1080p (Side by Side (Half)) 1920 x1080 60 67.5 Graphic source monitor range limits Horizontal scan rate: 15k-102kHz Vertical scan rate: 24-120 Hz Max. pixel rate: Analog:165MHz Digital:165MHz Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 59.94/60 3[...]

53 English English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses , and can [...]

54 English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Confor mity for EU countries Acer hereby declares that this projector series is in complianc e with the essential requirements and other relevant provisions of D irective 1999/5/EC. Comp[...]

Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei Ci ty 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: ru.jan@ acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Ital y Tel: +39-02-939-921 ,Fax: +39-02[...]

Acer America Corporation 333 West San Ca rlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298- 4000 Fax: 254-298- 4147 www.ace r.com Federal Communica tions Commi ssion Declaration of Conformity This device complies w ith Part 15 of the FCC Rules. Opera tion is subject to the following two conditions: (1) thi s device may not cause har mfu[...]