ADTRAN 612 manual

61200624L1- 1B June 2004 T OTAL ACCESS 600 SERIES System Manual T otal Access 600R T otal Access 604 T otal Access 608 T otal Access 612 T otal Access 616 T otal Access 624[...]

Trademarks Total Access 600 Series System Manual 2 © 2004 ADTRAN, Inc. 61200624L1-1B T rademarks Any brand names and produ ct names included in this manual ar e trademarks, registered trad emarks, or trade names of their respective holders. T otal Access ® is a registered trad emark of ADTRAN, Inc. T o the Holder of the Manual The contents of thi[...]

Total Access 600 Series System Manual Revision History 61200624L1-1B © 2004 ADTRAN, Inc. 3 Revision History Conventions Document Revision Date Description of Changes A October 2002 Initial Release B May 2004 Updated to include menu changes for firmware release. Notes pr ovide additional useful informatio n. Cautions signify information that could [...]

Safety Instructions Total A ccess 600 Series System Manual 4 © 2004 ADTRAN, Inc. 61200624L1-1B Safety Instructions When using your telephone equi pment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water , such as a bath tub, wash bowl, kitchen sink, [...]

Total Access 600 Series System Manual FCC-Required Information 61200624L1-1B © 2004 ADTRAN, Inc. 5 FCC-Required Information FCC regulations require that the following informat ion be provided in this manual: 1. This equipment complies with Part 68 of FCC rules and requirements adopted by ACT A. On the equ ipment housing is a label that contains, a[...]

FCC-Required Informat ion Total Access 600 Series Sy stem Manual 6 © 2004 ADTRAN, Inc. 61200624L1-1B Federal Communications Co mmission Radio Frequency Inte rference Statement This equipment has been tested and found to comply with the limits for a Class A digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide [...]

Total Access 600 Series System Manual Affidavit Requirements for Connection to Digita l Services 61200624L1-1B © 2004 ADTRAN, Inc. 7 Affidavit Requirements for C onnection to Digital Services • An affidavit is required to be given to the telephone compan y whenever digital terminal equipment wi thout encoded analog content and billing protect io[...]

Affidavit Requir ements for Connection to Digital Services To tal Access 600 Series Sy stem Manual 8 © 2004 ADTRAN, Inc. 61200624L1-1B A FFIDAVIT FOR C ONNECTION OF C US TOMER P REMISES E QUIPMENT TO 1.544 M BPS AND / OR S UBRATE D IGITAL S ERVICES For the work to be performed in the cert ified territory of __________ _________ (telco name) State [...]

Total Access 600 Series System Manual Industry Canada Compliance Information 61200624L1-1B © 2004 ADTRAN, Inc. 9 Industry Canada Compliance Information Before installing this equipment, users should ensure that it is permissible to be connected to the f acilities of the local telecommunications co mpany . The equipment must also be installed using[...]

Product Warranty Total Access 600 Series System Manual 10 © 2004 ADTRAN, Inc. 61200624L1-1B Product W arranty ADTRAN will repair and return this p roduct within the warranty period if it does not meet its publis hed specifications or fails whil e in service. W arranty information can be found at ww w .adtran.com/warranty . Product Registration Reg[...]

Total Access 600 Series System Manual Customer Se rvice, Product Support In formation, and Training 61200624L1-1B © 2004 ADTRAN, Inc. 11 Post-Sale Support Y our resel ler should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web sit e provides a variety o f support services such as a searchable[...]

Customer Service, Product Support Informa tion, and Training Total Access 600 Series System Manual 12 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

Total Access 600 Series System Manual Table of Contents 61200624L1-1B © 2004 ADTRAN, Inc. 13 T able of Contents Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 This section provides an overview of the Total Access 600 Series system. Section 2 Engineering Guidelines . . . . . . . . . .[...]

Table of Contents Total Access 600 Series System Manual 14 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 15 SYSTEM DESCRIPTION This section provides an over view of the T otal Access 600 Series system. C ONTENTS System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Features and Benefits . . . . . . . . . . . . . . . . . . . . .[...]

Section 1 System Descriptio n Total Access 600 Serie s System Manual 16 © 2004 ADTRAN, Inc. 61200624L1-1B 1. SYSTEM OVERVIEW The T otal Access 600 Series contains Integrated Access Devices (IAD) designed for cost-effective deployment of voice and data services at the cust omer premises. The T otal Acc ess 600 Series benefits integrated communicati[...]

Total Access 600 Series System Manua l Section 1 System Description 61200624L1-1B © 2004 ADTRAN, Inc. 17 2. FEATURES AND BENEFITS The following list gives T otal Access 600 Series featur es and benefits. Some features are model-dependent. Configuration and Management • VT100 Emulation • SNMP Management •T e l n e t • Six levels of passw or[...]

Section 1 System Descriptio n Total Access 600 Serie s System Manual 18 © 2004 ADTRAN, Inc. 61200624L1-1B Frame Relay Support • Copper Mountain CE fragmentation su pport • Annex A, Annex D, and LMI suppor t (T1) • FRF.5 and FRF.8 support (V.35) Analog Ports • Analog FXS ports per TR-57, 50-Pin Amp (number o f ports is unit dependent) • S[...]

Total Access 600 Series System Manua l Section 1 System Description 61200624L1-1B © 2004 ADTRAN, Inc. 19 Performance Monitoring • Reports: Information stored for last 24 hours in 15 minut e increments • Performance sta tistics pe r TR54016, T1.403, RFC14 06 • Alarm reporting per TR54016, T1.4 03 3. IAD SYSTEMS The T otal Access 600 Series su[...]

Section 1 System Descriptio n Total Access 600 Serie s System Manual 20 © 2004 ADTRAN, Inc. 61200624L1-1B ADSL • P/N 42 00644L1 Total Access 604 ADSL • P/N 4200644L1#A CB Total Access 604 ADSL with Battery Backup • P/N 42 00684L1 Total Access 608 ADSL • P/N 4200684L1#A CB Total Access 608 ADSL with Battery Backup SDSL • P/N 42 00642L1 To[...]

61200624L1-1B © 2004 ADTRAN, Inc. 21 ENGINEERING GUIDELINES This section provides equi pment dimensions, power re quir ements, front panel design, re ar panel design, LEDs, and at-a-glance specifications. C ONTENTS Equipment Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 22 © 2004 ADTRAN, Inc. 61200624L1-1B Table 10. V.35 Winchester Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Table 11. LIFE LINE Connection Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 23 1. EQUIPMENT DIMENSIONS T otal Access 600R, T otal Access 604/608 The T otal Access 600R and T otal Access 604/608systems measure 1 1.25” W , 7.5” D, and 2” H and come equipped for table top o r wallmount use. T otal Access 612/616/624[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 24 © 2004 ADTRAN, Inc. 61200624L1-1B Front Panel LEDs The front panel p rovides five st atus LEDs to mon itor operation and activity . T able 3 provides LED descriptions for T otal Access 600R systems. T otal Access 604/608 The front panels of the T otal Access 604/608 system [...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 25 Front Panel LEDs The front panel provides eight status LEDs to m onit or operation and activity . The LED functionality varies based on product and softwa re load (TDM versus A TM). T able 3 provides LED descriptions for T otal Access 604/60[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 26 © 2004 ADTRAN, Inc. 61200624L1-1B Table 4. To tal Access 6XX ATM Fr ont Panel LE Ds For these LEDs... This col or light... Indicates that... TX/RX Off there is no data traf fic on the LAN. Green (blinking) there is data traffic on the LAN. LINK Off the physical link is down[...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 27 T otal Access 612/616/624 The front panels of the T otal Access 612/616/624 sy stems are identical. Figure 3 shows the T otal Access 612 front panel as a representative of all models. Figure 3. Total Access 6 12/616/624 Front Panel La yout F[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 28 © 2004 ADTRAN, Inc. 61200624L1-1B 4. REVIEWIN G THE RE AR PANEL DESIGN The T otal Access 600R provides a NTWK connection (via an RJ-48 connector), a CRAFT interface (via an RJ-49 connector), a 10/100BA SET interface (via an RJ -48 connector), and an AC PWR connection (via a[...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 29 Figure 5. Total Access 604/608 Rear Panel Figure 6. Total Access 604/608 Rear Panel with Optional Life Line POTS Figure 7. Total Access 604/608 Rear Panel wit h Optional DSX-1 Interface Figure 8. Total Access 612/6 16/624 Rear Panel Figure 9[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 30 © 2004 ADTRAN, Inc. 61200624L1-1B Figure 10. Total Access 612/6 16/624 Rear Panel with Optional DSX-1 Interface VOICE Connection A single 50-pin female amphen ol connector provides the interconnect wiring for the analog FXS and FX O (available as an option only on the T ota[...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 31 CRAFT Port The CRAFT port (EIA-232) on the rear panel connec ts to a computer or modem an d provides the followin g functions: • Accepts EIA-232 input from a PC or a mode m for controlling the Total Access 600 Series. • Baud rate is u se[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 32 © 2004 ADTRAN, Inc. 61200624L1-1B Note: All other pins are unused. Table 8. DB-9 to RJ-48 Adapter Pinout (Continued) DB-9 RJ-48 DESCRIPTION[...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 33 10/100BaseT Connection The 10/100BASET port (RJ-48C) p rovides a 10/100Bas eT Ethernet LAN connection fo r IP Routing , TFTP , SNMP , and T elnet connections. T abl e 9 shows the 10/100BaseT pino ut. V .35 Connection The T otal Access 600 Se[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 34 © 2004 ADTRAN, Inc. 61200624L1-1B Life Line Analog Connection The LIFE LINE analog connection provides assured voice for port 1. If the unit loses power or goes into alarm, the network voice service is inhibited and the on-board relay op ens. The first port of the voice con[...]

Total Access 600 Series System Manual Section 2 Engineering Guidelines 61200624L1-1B © 2004 ADTRAN, Inc. 35 5. AT-A-GLANCE SPECIFICATIONS T able 13 lists the unit specifications. Table 13. Specifications Application Feature Specification T1 Network Interface Physical I nterface RJ-48C Line Rate 1.544 Mbps +/- 75 bps Framing D4 (SF)/ESF A T&T 5[...]

Section 2 Engineering Guideli nes Total Access 600 Series System Manual 36 © 2004 ADTRAN, Inc. 61200624L1-1B Analog Ports Number of FXS Ports 4 po rts for T otal Ac cess 604 8 ports for T otal Access 608 12 ports for T otal Access 612 16 ports for T otal Access 616 24 ports for T otal Access 624 Modes FXS Loop Start FXS Ground Start TR08 Single TR[...]

61200624L1-1B © 2004 ADTRAN, Inc. 35 NETWORK T URNUP PROCEDURE This section provides shipmen t contents list, groundi ng instructions, mounting op tions, and specifics of supplying power to the unit. C ONTENTS Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Network Tu rnup Procedu re Total Access 600 Series Sy stem Manual 36 © 2004 ADTRAN, Inc. 61200624L1-1B 1. INTRODUCTION This section discusses T otal Access 600 Series installation. 2. T OOLS REQUIRED The tools required for wallmount installati on of the unit are: • Four #8 x 3/4 inch pan-head wo od screws • Drill and drill bit set • Flat hea[...]

Total Access 600 Series System Manual Section 3 Network Turnup Procedure 61200624L1-1B © 2004 ADTRAN, Inc. 37 Contents of ADTRAN Shipments Y our ADTRAN shipment includes the following items: • The Total Access 6XX unit with attached wallmount brackets • The Total Access 600 Series System CD – ADTRAN P/N 325305 2 • Hardware revision notice [...]

Network Tu rnup Procedu re Total Access 600 Series Sy stem Manual 38 © 2004 ADTRAN, Inc. 61200624L1-1B 5. MOUNTING OPTIONS All units may be wallmounted or installed in a table-top application. In addition, the T otal Access 612/616/624 units are available for 19- or 23-inch rackmount installa tions. W allmount brack ets are included with the unit [...]

Total Access 600 Series System Manual Section 3 Network Turnup Procedure 61200624L1-1B © 2004 ADTRAN, Inc. 39 Figure 1. Wallmount Orie ntation Figure 2. Wallmounting the Unit Note : The T otal Access 600 Series units come equipped with wall mount brac kets preinstalled.[...]

Network Tu rnup Procedu re Total Access 600 Series Sy stem Manual 40 © 2004 ADTRAN, Inc. 61200624L1-1B Rackmounting the T o tal Access 612/616/624 T ools Needed The T otal Access 612/616/624 mount and connect with standard fasteners and hand tools: • Rac kmount brackets (19”– P/N 1200627L1 or 23”–P/N 1200 627L2) • Flat head screwdriver[...]

61200624L1-1B © 2004 ADTRAN, Inc. 41 USER INTERFACE GUIDE This section of ADTRAN’s T otal Access 600 Series System Manual is designed for use by network administrators and others who will configure and provision the sy stem. It contai ns information about navigating the VT100 user inte rface, configur ation informat ion, and menu desc riptions. [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 42 © 2004 ADTRAN, Inc. 61200624L1-1B F IGURES Figure 1. Top-Level Terminal Menu Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Figure 2. Alternate Menu View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 43 1. NAVIGATING THE T ERMINAL MENU T o access the terminal menus and management features of the T otal Access 6XX, connect the unit to a VT100 terminal (or VT100 terminal emulator) via the CRAFT interface on the rear pane l. Configure the termin[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 44 © 2004 ADTRAN, Inc. 61200624L1-1B Figure 2. Alternate Menu View Window Pane Navigatio n Use the following chart to assis t you in moving between and within the two window panes. Right Window Pane Notat ion The right window pane shows the contents of the cu rrently selected [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 45 Additional T e rminal Menu Window Features • Mod e – displays the network interface mode of the unit (for example , T1 IAD, SHDSL IAD, SDSL IAD, ADSL IAD) • L2 Statu s – displays the current status o f the L2 protocol (ATM sync is eith[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 46 © 2004 ADTRAN, Inc. 61200624L1-1B Session Manage ment Keystrokes Configuration Keystrokes Move to th e bottom of a screen Z Ascend one menu level Backspace Jump to terminal mode CTRL+T Jump to NA T menu CTRL+N T o do this... Press this key ... Log out of a session CTRL+L Re[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 47 Getting Help The bottom line of the term inal menu window contains context- sensitive help information. When the cursor is positioned over a set of configuration items, a help message displays (when available) providing a description of the it[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 48 © 2004 ADTRAN, Inc. 61200624L1-1B Security Levels T o edit main menu system items, you must have a p assword and the appropriate security level. T able 1 describes the security levels. 3. MENU DESCRIPTIONS The remainder of this section describes T otal Access 6XX menu and s[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 49 S YSTEM I NFO The S YSTEM I NFO menu provides basic information about th e unit as well as data fields for editing information. Figure 3 displays th e submenus th at are available when you select this menu item. 0 Figure 3. System Info Menu S [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 50 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM I NF O > P ART N UMB ER (Read only) Displays the ADTRAN-sp ecific part number for the unit. S YSTEM I NF O > C ONTROLLER S ERIAL N UMBER (Read only) Displays the ADTRAN-spec ific part number for the chassis hardware. The seria[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 51 S YSTEM C ONFIG Set up the unit’ s operational configuration from the S YSTEM C ONFIG menu. Figure 4 shows the items included in this menu. Figure 4. System Config Menu S YSTEM C ONFIG > M ANAGEMENT Set up the CRAFT port, T ELNET A CCESS [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 52 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > M ANAGEMENT > CRAFT P ORT > I DLE T IME This option defines the amount of time in minutes user may stay connected without any activity on the CRAFT port before the user is automatically logged out of the system. A[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 53 S YSTEM C ONFIG > M ANAGEMENT > T ELNET A CC ESS > A CCES S Sets A CCESS to O N or O FF to allow or block telnet access to the unit. The factory default value for this parameter is O N . S YSTEM C ONFIG > M ANAGEMENT > T ELNET A[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 54 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > M ANAGEMENT > T ELNET A CC ESS > A CTIV E S ESSIONS Provides a list of all T elnet sessions currently active on the system. Table 3. Telnet Security Levels Security Level Descripti on Full The user has all acces s[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 55 S YSTEM C ONFIG > M ANAGEMENT > T ELNET A CC ESS > IP A CCESS L IST Set up the list of allowed T elnet connections by specif ying the IP address of the sy stems used to control the unit. S YSTEM C ONFIG > M ANAGEMENT > SNMP M AN[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 56 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > M ANAGEMENT > SNMP M ANAG EMENT > T RAPS Sets up the trap manager name and IP from this menu. S YSTEM C ONFIG > M ANAGEMENT > FDL M ANAG EMENT Enables the FDL management and configures mode and IP addresses [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 57 S YSTEM C ONFIG > M ANAGEMENT > FDL M ANAG EMENT > M ODE This enables the FDL (only in ESF mo de) to be used for management. Learning mode can also be enabled so the unit can "learn" its IP configuration from the connected D[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 58 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > S YSLOG > S YSLOG IP IP address of the syslog daemon to which log message should be sent. The values must be dotted decimal notation. S YSTEM C ONFIG > S YSLOG > S YSLOG F ORMAT The S YSLOG F ORMAT is the forma[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 59 SYSLOG using T erminal Mode Another option for configuring sy slog is using the terminal mode com mand log dump <logname> . The logname must be all CAPS must ma tch the listings below . The command will dump all messages for the indicate[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 60 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > S YSLOG > ARP L EVEL Minimum required level for sending ARP log mess ages. Address Resolution Protocol log messages provide status information for all ARP requests sent and received by the unit. S YSTEM C ONFIG > [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 61 S YSTEM C ONFIG > S YSLOG > TOLLBRG L EVEL Minimum required level for sending lo g messages about communication with the T ollbridge V oice Gateway . Messages are only generated for A TM products. S YSTEM C ONFIG > S YSLOG > CMCP L[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 62 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > S YSLOG > POTS L EVEL Minimum required level for sending lo g m essages about POTS line cards and services. S YSTEM C ONFIG > S YSLOG > LESCAS L EVEL Minimum required level for send ing messages about communica[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 63 S YSTEM C ONFIG > S YSLOG > VOA TM L EVEL Minimum required level for sending V oice-over-A TM log messages. V oA TM messages provide status information concerning the FXS (or FXO for T otal Access 624 units only) voice signaling occurrin[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 64 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM C ONFIG > N ETWORK T IME > A DJUST FOR D AYLIGHT S AVING Since some areas of the world use Daylight Savings T i me, the unit is designed to adjust the time on the first Sunday in April and the last Sunday in October accor ding[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 65 S YSTEM U TILITY > U PGRADE F IRMWARE Select the firmware upgrade method and perform upgrade from this menu. S YSTEM U TILITY > U PGRADE F IRMWARE > T RANSFER M ETHOD The customer ca n update firmware wh en unit enhancements are relea[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 66 © 2004 ADTRAN, Inc. 61200624L1-1B T o support these transfers, ADTRAN delivers a TFTP program with the unit called TFTP Server . Y ou can configure any PC run ning Microsoft W indows with this software, and store a configuration file. Only one configuration transfer session[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 67 S YSTEM U TILITY > S YS TEM U TILIZATION V iew the CPU utilization stats from this menu. S YSTEM U TILITY > S YS TEM U TILIZATION > P ERFOR MANCE Clear the system utilization stats and view the total and current CP U utilization stats[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 68 © 2004 ADTRAN, Inc. 61200624L1-1B S YSTEM U TILITY > S YS TEM U TILIZATION > P ERFOR MANCE > C LEAR S TATS This activator will clear all the sy stem utilization performance stats. S YSTEM U TILITY > P ING Activate the ping test and define the ping packet chara c[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 69 S YSTEM U TILITY > T RACEROUTE > T RACE T AR GET Specifies the IP address of the remo te system to trace the routes to. S YSTEM U TILITY > T RACEROUTE > M AXIMUM H OPS Specifies the maximum number of router exchanges allowed when t[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 70 © 2004 ADTRAN, Inc. 61200624L1-1B Options: repeat <repeat count> Number of pings to send (default 5) size (datagram size) Range is 40-1500 timeout (seconds) T imeout in seconds (range 1-10) source (address or name) Source address or interface name to use noNat Do not [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 71 I NTERFACES Use the I NTERFACES menu to view and config ure paramete rs for the various system interfaces ( T1 , SHDSL , SDSL , ADSL , Ethernet ( ETH ), V. 3 5 , FXS , FXO , and DSX-1 ). Figure 6 displays the interfaces menu for an SDSL IAD. F[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 72 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (T1) > C ONFIG > L INE C ODE This sets the line code for the T1 in terface. The setting must match the line code of the circuit to which the interface is connected. Choices are B8ZS (bipolar with 8-zero substitution) and A[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 73 I NTERFACES (T1) > S TATUS > P ERFORMANCE > C URRENT AND T OTALS > SES SES (Severely Errored Second) - For ESF mode, an SES is a second with 320 or more PCVs, or one or more OOF defects, or a detected AIS defect. For D4 (SF) mode, [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 74 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (T1) > S TATUS > A LA RMS > C URRENT A LARMS Displays the current alarms on the T1 inte rface. An asterisk in a field indicates that an alarm is active. I NTERFACES (T1) > S TATUS > A LA RMS > A LARM H ISTORY D[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 75 I NTERFACES (N ETWORK SHDSL) V iew the network SHDSL interface status and config ure SHDSL parameters from this menu. These me nus are only applicable to SHDSL T otal Access 600 Series systems. I NTERFACES (SHDSL) > C ONFIG Configure the va[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 76 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (SHDSL) > S TATUS > G. HS E VENT Internal ADTRAN use only . I NTERFACES (SHDSL) > S TATUS > G. HS S TATE Internal ADTRAN use only . I NTERFACES (SHDSL) > S TATUS > A NNEX Displays the current G.shdsl signaling [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 77 I NTERFACES (SDSL) > S TATUS Displays the SDSL interface status information. I NTERFACES (SDSL) > S TATUS > SDSL R ATE Displays the current ne gotiated SDSL data rate. I NTERFACES (N ETWORK ADSL) V iew the network ADSL interface statu[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 78 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (DSX) V iew the integrated DSX interface status an d configure T1 parameters from this menu. I NTERFACES (DSX) > C ONFIG Configure the various DSX parameters an d enable/disable loopbacks from this menu. I NTERFACES (DSX) >[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 79 I NTERFACES (DSX) > S TATUS > P ERFORM ANCE > C URRE NT AND T OTALS > I NTERVAL Identifies the interval ( C URRENT or T OTAL ) for the listed performance statistics. I NTERFACES (DSX) > S TATUS > P ERFORM ANCE > C URRE NT [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 80 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (DSX) > S TATUS > P ERFORM ANCE > C LEAR A LL D ATA Clears all statistics collected in the C URRENT AND T OTALS and the E XTENDED 24 hour statistics tables. I NTERFACES (DSX) > S TATUS > A LARM S Displays current [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 81 I NTERFACES (DSX) > T EST > R EM LB Sends a loopback command across the network to a remote unit over the FDL, which causes the remote unit initiate a local L INE or P AYLOAD loopback (whichever is specified). The remote loopback is only[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 82 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (V35) V iew the V .35 interface status and config ure the V .35 paramete rs from this menu. I NTERFACES (V35) > C ON FIG Configure the DTE leads from this menu. I NTERFACES (V35) > C ON FIG > CTS Sets the control charac[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 83 I NTERFACES (FXS) > C ONFIG > P ORT Indicates the port of the FXS module. I NTERFACES (FXS) > C ONFIG > M ODE Choices are given below . Default is L OOP S TART . I NTERFACES (FXS) > C ONFIG > T X ( d B) Sets the TX direction [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 84 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (FXS) > C ONFIG > S VC M ODE Indicates whether the module is I N S ERVICE or O UT OF S VC . This does not indicate whether the port has been mapped. For prop er operation, the port must be mapp ed using the DS0 M APS menu.[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 85 I NTERFACES (FXS) > C ONFIG > T ANDEM > D IAL T ON E Used to enable or disabl e the on-board dial ton e genera tion. Dial T one is supplied for 5 sec; then it drops. It cannot be broken when dialin g digits. Default is D ISABLE . I NT[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 86 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (FXS) > S TATUS > RA S IG This parameter displays the status of the Receive A signal bit. The high /low status is indicated by a 0 or 1. I NTERFACES (FXS) > S TATUS > RB S IG This parameter displays the status of the[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 87 I NTERFACES (FXO) > C ONFIG Configure the FXO mo de, line impe dance, and T andem para meters from this menu. I NTERFACES (FXO) > C ONFIG > P ORT Indicates the port of the FXO module. I NTERFACES (FXO) > C ONFIG > M ODE Choices [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 88 © 2004 ADTRAN, Inc. 61200624L1-1B I NTERFACES (FXO) > S TATUS > P ORT Displays the port number . I NTERFACES (FXO) > S TATUS > T A S IG This parameter displays the status of the Transmit A signal bit. The high/low status is indicated by a 0 or 1. I NTERFACES (FX[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 89 L2 P ROTOCOL (TDM F IRMWARE ) Use the L2 protocol menu to select the L2 pro tocol, config ure the protocol specific parameters and view the status as shown in Figure 7. The following menus a re for T otal Access 600 Series systems using TDM fi[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 90 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (TDM F IRMWARE ) – T1 I NTERFACE Configure the L2 Protocol parameters and view the status of the Network T1 interface using items from this menu. L2 P ROTOCOL (TDM – T1) > P ROTOCOL Configure the L2 protocol mode. Choice[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 91 L2 P ROTOCOL (TDM F IRMWARE ) – T1 I NTERFACE > PPP Configure the L2 P ROTOCOL parameters and view the status of the T1 interface using PPP pro tocol from this menu. L2 P ROTOCOL (T1 TDM–T1–PPP) > C ONFIG Configure the L2 P ROTOCOL[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 92 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (TDM–T1–PPP) > C ONFIG > PPP > M AX T IMER ( SEC ) This value is the numbers of secon ds to wait between unans wered co nfiguration-requests. The po ssible values are 1 SEC , 2 SECS , 3 SEC S (def), 5 SECS and 10 S[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 93 L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > R X P KTS Number of packets receiv ed on the T1 i nterface. L2 P ROTOCOL (TDM–T1–PPP) > S TATUS > T X B YT ES Number of bytes transmitt ed on the T1 interface. L2 P ROTOCOL (TDM–T1–[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 94 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (TDM–T1–FRE) > C ON FIG > M AINTENAN CE P ROTO COL The Frame Relay maintenance protocol is used on th e W AN port. The maintenan ce protocol is used to send link status and virtual circuit information between Frame Re[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 95 L2 P ROTOCOL (TDM–T1–FRE) > C ON FIG > DLCI M APPI NG I NTERF ACE Shows the user the physical and logical port asso ciated with each DLCI. This is a read-only field. L2 P ROTOCOL (TDM–T1–FRE) > C ON FIG > DLCI M APPI NG >[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 96 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (TDM–T1–FRE) > S TATUS > P ORT > C URRENT U TIL (b/s) Current utilization of the T1 interface ba ndwidth presented in bits per second. L2 P ROTOCOL (TDM–T1–FRE) > S TATUS > P ORT > C URRENT U TIL (%) C[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 97 L2 P ROTOCOL (TDM–T1–FRE) > S TATUS > PVC( S ) > S TATE The state of the virtual circuit: L2 P ROTOCOL (TDM–T1–FRE) > S TATUS > PVC( S ) > T X F RAMES Number of Frame Relay packets that have been transmitted via this [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 98 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (TDM F IRMWARE ) – T1 I NTERFACE > HDLC P ROTOCOL V iew the status of the T1 interface with the L2 P ROTOCOL set to HD LC . L2 P ROTOCOL (TDM–T1–HDLC) > S TATUS V iew the status of traffic flow and utilization for t[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 99 L2 P ROTOCOL (TDM F IRMWARE ) – T1 I NTERFACE > A UTO P ROTOCOL V iew the status of the T1 interface with the L2 P ROTOCOL set to A UTO (using Auto-config feature). L2 P ROTOCOL (TDM–T1–A UT O ) > S TATUS V iew the status of the au[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 100 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A TM F IRMWARE ) Use the L2 P ROTOCOL menu to select the L2 P ROTOCO L , configure the protocol specific parameters, and view the status as shown in Figure 7. The followi ng menus are for T otal Access 600 Series systems usin[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 101 L2 P ROTOCOL (A TM F IRMWARE ) – N ETWORK (NET) I NTERFACE Configure the L2 P ROTOCOL parameters for these menus are identic al regardless of network interface. Therefore, the interface is denoted by NET . L2 P ROTOCOL (A TM – NET) > P[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 102 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A TM–NET–A TM) > C ONFIG > A TM C ONFIG > D ATA S CRAMBLING D ATA S CRAMBLING can be E NABLED or D ISABLED for cell traffic. Configuring this setting incorrectly for a particular circuit will cause poor performan[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 103 L2 P ROTOCOL (A TM–NET–A TM) > C ONFIG > P VC C ONFIG > VCI This is the A TM V i rtual Channel Identifier that serves as an address for the virtual channel cell transmissions between two devices. The range is 0- 65355 . The defau[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 104 © 2004 ADTRAN, Inc. 61200624L1-1B T X M ETHOD Specifies the method the T otal Acces s 600 Series uses to obtain PPP authentication from the peer . There are four possible selections: N ONE The connection will not allow the PPP peer to authenticate it. P AP , C HAP , OR E A[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 105 L2 P ROTOCOL (A TM–NET–A TM) > C ONFIG > P VC C ONFIG > S ETUP (V35) Use these menus to configure the V3 5 parameters for this logical connection from the T1 interface to the V .35 port. These menus are only applicable when the C[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 106 © 2004 ADTRAN, Inc. 61200624L1-1B C ONNECTION (V35) > S ETUP > S ETUP Use these menus to configure the Protocol mapp ing, DE map, and FECN map for th e V .35 PVC connections . C ONNECTION (V35) > S ETUP > S ETUP > P ROTOCOL M APPING Network providers have th[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 107 L2 P ROTOCOL (A TM–NET–A TM) > C ONFIG > P VC C ONFIG > S ETUP (V OICE ) Use these menus to configure the voic e parameters for this logical conn ection from the T1 interface to the DSX-1 of FXS port being used as a voice interf [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 108 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A TM–NET–A TM) > S TA TUS Displays all available A TM statistics (both overall and PVC-specific). L2 P ROTOCO L (A TM–NET–A TM) > S TA TUS > A TM S TATUS Displays overall A TM link performance statistic s. Th[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 109 L2 P ROTOCOL (A TM–NET–A TM) > S TA TUS > PVC S TATUS V iew the A TM PVC statistics from this menu. L2 P ROTOCOL (A TM–NET–A TM) > S TA TUS > PVC S TATUS > N UM Displays the index number in the PVC Status menu. L2 P ROT[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 110 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (T1 A TM–T1–A TM) > S TA TUS > P VC S TATUS > P ROTO COL S TATUS Use these menus to view the AAL2 S TATS , P OTS S TATS , and to C LEAR S TATS for the PVC Protocol. CRC E RRORS Number of AAL5 CRC Errors. R EASSEMB[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 111 L2 P ROTOCOL (A TM F IRMWARE ) – N ETWORK I NTERFACE > C U M TN FRE Configure the L2 P ROTOCOL parameters and view the status o f the network interface using Copper Mountain Frame Relay protocol from this menu. L2 P ROTOCOL (A TM–NET?[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 112 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A TM–NET–C U MTN) > C ONFIG > N UM Displays the index number in the DLCI config table. The nu mber range is 0-9 . L2 P ROTOCOL (A TM–NET–C U MTN) > C ONFIG > A CTIVE When this parameter is set to Y ES (def[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 113 L2 P ROTOCOL (A TM–NET–C U MTN) > S TATUS > DLC I S TATE This is a read-only field that displays the live DLCI state. L2 P ROTOCOL (A TM–NET–C U MTN) > S TATUS > P ROTOCOL S TATUS This is a read-only field that displays th[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 114 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A TM – V35)> S TATUS > P ORT Displays statistics for all the PVCs configured on this port. The following statistics are available: L2 P ROTOCOL (V35[2]-A TM)> S TATU S > PVC( S ) Displays statistics for all the [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 115 L2 P ROTOCOL (A TM F IRMWARE ) – DSX I NTERFACE Configure the L2 P ROTOCOL parameters and view the status of the integrated DSX interface using items from this menu. L2 P ROTOCOL (A TM – DSX) > C ONFIG Configures the voice para meters [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 116 © 2004 ADTRAN, Inc. 61200624L1-1B L2 P ROTOCOL (A LL F IRMWARE ) – ETH I NTERFACE > 802.3 P ROTOCOL Configure the L2 PROTOCOL parameters and view the status of the Ethernet interface from this menu. L2 P ROTOCOL (ALL–ETH–802.3) > P ROTOCOL Displays the L2 P ROT[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 117 L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > R X E RRORS Number of packets receiv ed in error and dropped. L2 P ROTOCOL (ALL–ETH–802.3) > S TATUS > CRC S Number of packets detected with CRC errors. L2 P ROTOCOL (ALL–ETH–80[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 118 © 2004 ADTRAN, Inc. 61200624L1-1B B RIDGE > C ONFIG > I NTERFACES (N ETWORK ) Configure the network interface brid ging parameters from this menu. B RIDGE > C ONFIG > I NTERFACES (NET) > S UB -I NT ERFACE The network sub-interfa ce is PPP [0.0] if the L2 PRO[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 119 B RIDGE > S TATUS > B RI DGE T ABLE > L OCATION Location indicates if it is LAN or W AN. This is a read-only field. B RIDGE > S TATUS > B RI DGE T ABLE > TTL T ime to Live (TTL) is the number of seconds until the address is [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 120 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > C ONFIG > I NTERFACES (ETH) > S UB -I NTERFACE This is a read-only field which displays the physical and logical por t of the interface using the following nomenclature: [A.B], wh ere A represents the physical po rt (net[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 121 TX AND RX ( DEF ) RIP advertisements are periodically tran smitted and are listened to on this port. TX O NLY RIP advertisements are periodically transm itted but are not listene d to on this port. RX O NLY RIP advertisements are listened to [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 122 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > C ONFIG > I NTERFACES (N ETWOR K ) Configure the layer 3 options for the network interface from this menu. R OUTER > C ONFIG > I NTERFACES (NET) > S UB -I NTERFACE This is a read-only field which displays the physi[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 123 IP N ETMASK This is the network mask used for this interface. This field is not visible when A DDRESS M ODE is set to DHCP C LIENT . F AR -E ND IP A DDRESS This is the address of the NEXT hop router on this interface. This field is only visib[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 124 © 2004 ADTRAN, Inc. 61200624L1-1B P UBLIC A DDRESS M ODE Choose NAPT A DDR (default) or S PECIFIED to choose which address to use for this translation. Choosing S PECIFIED allows the user to define a dif ferent public IP address to use for this translation. P UBLIC A DDRES[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 125 P UBLIC P ORT This menu ap pears when th e P UBLIC P ORT M ODE is set to S PECIFIED . Use this option to specify the public port nu mber to translate. Some well known TCP/UDP port numbers are shown below: Port Number Keyword Port T ype 20 FTP[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 126 © 2004 ADTRAN, Inc. 61200624L1-1B T RANSLAT E B ODY If set to Y ES , the application pay load in the packet is scanned for occurrences of the private/public IP address i n binary or ASCII form. Set this to N O for applications where scanning payload data is und esirable. N[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 127 I N C OUNT Number of inbo und packet s using this translation. O UT C OUNT Number of outbou nd packet s using this translation. NAPT A DDRESS (Read only) Displays the NAP T address for the router . This will either be the interface address or[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 128 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > C ONFIG > R OUTES Configures the default gateway an d static routes from this menu. R OUTER > C ONFIG > R OUTES > D EFAULT G ATEWAY The default gateway is used by the unit to send IP packets whose destination addre[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 129 R OUTER > C ONFIG > DHCP S ERVER > DHCP S ERVER Use this menu to enable the DHCP server ( O N or O FF ). R OUTER > C ONFIG > DHCP S ERVER > DHCP A DDRESS P OOLS Configures the parameters for th e various defined DHCP address[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 130 © 2004 ADTRAN, Inc. 61200624L1-1B N ETWORK M ASK Defines the network mask associated with the ne twork address for the configured address pool (for example, 255.255.0.0). The N ETWORK A DDRESS and N ETWORK M ASK determine the number of addresses available on the ne twork f[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 131 R OUTER > C ONFIG > DHCP S ERVER > E XC LUSION R ANGES Defines any IP address (or range of addresses ) that should not be used the T otal Access 600 Series DHCP server when making IP assignme nts to hosts on the network. R OUTER >[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 132 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > S TATU S V iew the IP R OUTES , IP S TATS , ARP C ACHE , DHCP S ERVER , and DHCP C LIENT statistics from this me nu. R OUTER > S TATU S > IP R OUTES This lists the contents of the unit’ s IP route table. R OUTER > S[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 133 R OUTER > S TATU S > IP R OUTES > F LAGS Important tags associated with this route entry R OUTER > S TATU S > IP R OUTES > H OPS Number of routers that must go through to get to destinati on. Ranges from 0-15 or 16 for infin[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 134 © 2004 ADTRAN, Inc. 61200624L1-1B IP D ATAGRAMS R ECEIVED The total number of input data grams received from interfaces, including those re ceived in error . B AD H EADER P ACKETS The number of input datagrams discarded due to errors in their IP headers, including bad c he[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 135 R OUTELESS D ISCARDS The number of IP datagrams discard ed because no route could be found to transmit them to their destination. Note that this counte r inclu des any pa ckets coun ted in T OTAL F ORWARDED D ATAGRAMS which meet this “no-ro[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 136 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > S TATU S > IP S TATS > ICMP ICMP MESSAGES RECEIVED The total number of ICMP messag es the unit received. Note that this counter includes all those counted by ICMP S PECIFIC E RRORS . ICMP S PECIFIC E RRORS The number of [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 137 ICMP A DDRESS M ASK R EPLY M SGS R CVD The number of ICMP Address Mask Reply messages received. ICMP M ESSAGES S ENT The total number of ICMP messages this unit attempted to send. Note that this counter includes all those counted by ICMP P AC[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 138 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > S TATU S > IP S TATS > UDP V iew the UDP statistics from this menu. R OUTER > S TATU S > IP S TATS > UDP T ABLE V iew the UDP table statistics from this menu. ICMP A DDR M ASK R EQUEST M SGS S ENT The number of [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 139 R OUTER > S TATU S > IP S TATS > TCP V iew the TCP statistics from this menu. R ETRANSMISSION T IMEOUT A LGORITHM The algorithm used to de termine the timeout value used for retransmitting unackn owledged octets. M IN R ETRANSMISSION[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 140 © 2004 ADTRAN, Inc. 61200624L1-1B R OUTER > S TATU S > IP S TATS > TCP C ONNS V iew the TCP Conns Statistics from this menu. This table shows the dif ferent states of each TCP connection. R OUTER > S TATU S > ARP C ACHE Displays the contents of the unit’ s[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 141 R OUTER > S TATU S > ARP C ACHE > IP A DDRESS IP address used for resolving MAC address. R OUTER > S TATU S > ARP C ACHE > MAC A DDRESS Ethernet address resolved (0=no resolution). R OUTER > S TATU S > ARP C ACHE > [...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 142 © 2004 ADTRAN, Inc. 61200624L1-1B S ECURITY > F IL TERS > F ILTER D EFINES The unit can filter packets based on certain parameters within the pack et. The method used by the unit allows the highest flexibility for de fining filters and assigning them to a PVC or PPP [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 143 S ECURITY > F IL TERS > F ILTER D EFINES > P ATTERN F ILTER D EFINES The pattern filter is applied to bridge packets only . Th at is any p acket which is forwarded by th e bridge functionality of the unit. Up to 32 pattern defines ca[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 144 © 2004 ADTRAN, Inc. 61200624L1-1B N AME Identifies the filter entry . Default is no entry in name field. F ILTER T YPE Specifies a N ORMAL or D EBUG filter . When a N ORMAL filer is applied to an interface, traffic is blocked or forwarded according to the filter . When a D[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 145 S ECURITY > F IL TERS > I NTERFACES The unit can bl ock packets in and out o f an interface by us e of the filters. They are set up in two steps: 1) define the types of packets that would be of interest in the S ECURITY > F ILTERS &g[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 146 © 2004 ADTRAN, Inc. 61200624L1-1B S ECURITY > F IL TERS > I NTERFACES > S ET - UP Enable packet blocking or fo rwarding and appl y pre-defined filter exc eptions from this menu. I NCOMING The packets received on the selected interface can be filtered in three ways[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 147 N EXT O PER The next operation to use to combine with the next filter in the list (default is E ND ). END the last filter to combination. AND logically AND this filter with the next filter in the list. OR logically OR this filter with the nex[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 148 © 2004 ADTRAN, Inc. 61200624L1-1B S ECURITY > R AD IUS S ERVER The parameters for the R ADIUS S ERVER are configured in this menu. S ECURITY > R AD IUS S ERVER > S ERVER 1 This is the IP address of the first R ADIUS S ERVER that the unit should attemp t to communi[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 149 S ECURITY > R AD IUS S ERVER > R ETRY C OUNT (1-10) This is the number of times the unit should send a request packet tho the R ADIUS S ERV ER without a response before giving up. If the num ber of attempts to communicate with the prima[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 150 © 2004 ADTRAN, Inc. 61200624L1-1B DS0 M APS > A CTIV E M AP Activates one of the two dedicated maps ( M AP 1 or M AP 2 ), or the D UAL T1 M AP (only available in units with the optional DSX-1 interface). In the D UAL T1 mode, the built-in DSX-1 interface DSX[3] can be u[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 151 DS0 M APS > E DIT /V IEW M AP 1 > RBS V oice applications require si gnaling information to identi fy the state of the channel. In some voice networks a dedicated sign aling ch annel is available to accomplish this (for example, ISDN wi[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 152 © 2004 ADTRAN, Inc. 61200624L1-1B 4. APPENDICES (T1 TDM APPLICATIONS) Appendix A. Configuri ng the Unit for Routing Initial Setup It is best to configure T otal Acces s 6XX TDM applic a tions by following the order of the top-level menus. For example, first configure th e [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 153 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Layer 2 Frame Relay Pr otocol menus beginning on page 93 Layer 2 PPP Pr otocol menus beginni ng o[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 154 © 2004 ADTRAN, Inc. 61200624L1-1B 7 Set DLCI to the DLCI number . This D LCI s hould match what is programmed in the network Frame Relay switch. 8 Set mode to R OUTE IP . Using this menu you also have the option to route only IP packets and bridge all other data packets ( [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 155 3. Setting the Router Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Router Ethernet Interface Configuration menus beginning on page 1 19 Router Network Interface Config ur[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 156 © 2004 ADTRAN, Inc. 61200624L1-1B 4. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: DS0 Map menus beginn ing on page 149 Router Options – T1 Interface (L2 Proto col = FRE or PPP) Step Action 1[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 157 DS0 Mapping Instructio ns Step Action 1 From the main menu, select DS0 M APS . 2 V erify that the A CTIVE M AP is set to either M AP 1 or M AP 2 . This is the map that is actively running on the unit. The unit has the ability to store two map[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 158 © 2004 ADTRAN, Inc. 61200624L1-1B Appendix B. Configuring the Unit for Bridging Initial Setup It is best to configure T otal Acces s 6XX TDM applic a tions by following the order of the top-level menus. For example, first configure th e system parameters using the S YSTEM [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 159 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Layer 2 Frame Relay Pr otocol menus beginning on page 93 Layer 2 PPP Pr otocol menus beginni ng o[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 160 © 2004 ADTRAN, Inc. 61200624L1-1B 7 Set DLCI to the DLCI number . This D LCI s hould match what is programmed in the network Frame Relay switch. 8 Set mode to B RIDGE A LL . Using this menu you also have the option to route only IP packets and bridge all other data packets[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 161 3. V erifying the Bridge Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Bridge menus beginnin g on page 1 17 4. Mapping the DS0s For more details on the co nfiguration para[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 162 © 2004 ADTRAN, Inc. 61200624L1-1B 2 V erify that th e A CTIVE M AP is set to either M AP 1 or M AP 2 . This is the map that is actively running on the unit. The unit has the ability to store two maps. • T o edit the current map, press <E NTER > on E DIT /V IEW M AP[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 163 Appendix C. Configur ing the Unit for V oice Applications Initial Setup It is best to configure T otal Acces s 6XX TDM applic a tions by following the order of the top-level menus. For example, first configure th e system parameters using the[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 164 © 2004 ADTRAN, Inc. 61200624L1-1B FXS Interface Set up Instructio ns Step Action 1 From the main menu, select I NTERFACES . 2 Highlight the C ONFIG menu for the FXS inte rface and press <E NTER > . 3 Right arrow to select M ODE and choose L OOP S TART , G ROUND S TAR[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 165 2. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: DS0 Map menus beginn ing on page 149 11 Press <E NTER > on the T ANDEM [+] option to view the T ANDEM optio[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 166 © 2004 ADTRAN, Inc. 61200624L1-1B Appendix D. Configuring the Unit for DSX-1 Applications The T otal Access 600 Series systems are available with an integrated DSX-1 interface for both voice and data applications. Regardless of the application (either voice or data), the T[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 167 2. Mapping the DS0s For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: DS0 Map menus beginn ing on page 149 This line code must match the line code used by the other units in the netwo[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 168 © 2004 ADTRAN, Inc. 61200624L1-1B DS0 Mapping Instructio ns Step Action 1 From the main menu, select DS0 M APS . 2 V erify that th e A CTIVE M AP is set to either M AP 1 or M AP 2 . This is the map that is actively running on the unit. The unit has the ability to store two[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 169 5. APPENDICES (T1 A TM APPLICATIONS) Appendix A. V oice Gateway Quick Start Procedure (V oice T urn Up) A typical V oA TM application (see Figure 7) uses a T otal Access 6X X connected to an A TM ne twork. For voice applications, a V oice Gat[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 170 © 2004 ADTRAN, Inc. 61200624L1-1B The following example provides step by step instru ctions for configuring the T otal Access 6XX T1 A TM system ( I NTERFACES and L2 P ROTOCOL ) for a standard voice application. System Info and System Config parameters should be set accord[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 171 FXS Interface Set up Instructio ns Step Action 1 From the main menu, select I NTERFACES . 2 Highlight th e C ONFIG menu for the FXS interface and press <E NTER > . 3 Right arrow to select M ODE and choose L OOP S TART , G ROUND S TART ,[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 172 © 2004 ADTRAN, Inc. 61200624L1-1B 2. Configuring the Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Layer 2 A TM Network T1 menus beginning on page 101 11 Press <E NTER > on the T ANDEM [+[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 173 8 Select S ETUP , and from the S ETUP menu, enter the Ga teway type under C ALL C ONTROL and enter the VPI and VCI value s for communicating with that Gateway . For this application, C ALL C ONTROL and virtual identif ier ( VPI and VCI ) valu[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 174 © 2004 ADTRAN, Inc. 61200624L1-1B Appendix B. RFC1483 Quick Start (IP Routing) The T otal Access 6XX allows for complete integrat ion of voice and data delivery from one compact platform (see Figure 10). Once yo u have completed the vo ice turn up procedure fro m the previ[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 175 T1 Interface Setup Instructions Step Action 1 From the main menu, select I NTERFACES . 2 Highlight the C ONFIG menu for the T1 inter face and press <E NTER > . 3 Right arrow to select F ORMAT and choose ESF or SF . This format must matc[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 176 © 2004 ADTRAN, Inc. 61200624L1-1B . 2. Configuring th e Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Layer 2 A TM Network Interface Pr otocol men us beginning on page 1 01 Layer 2 Protocol (A [...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 177 3. Setting the Router Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Router Ethernet Interface Configuration menus beginning on page 1 19 Router Network Interface Config ur[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 178 © 2004 ADTRAN, Inc. 61200624L1-1B 3 Select I NTERFACES and press <E NTER > . Use the right arrow key to h ighlight the S ETUP field for the T1 interf ace and pres s <E NTER > . Each virtual circuit on the T1 interface defined in the PVC C ONFIG has a separate l[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 179 Appendix C. RFC1483 Quick St art (IP Routing with NA T) T o illustrate the use of NA T , consider the example from Appendix B. RFC1483 Quick Start (IP Routing) on page 174. T o add NA T to the IP ro uting example, use the NA T menus. For more[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 180 © 2004 ADTRAN, Inc. 61200624L1-1B Appendix D. RFC 1483 Quick Start (Bridging) Initial Setup It is best to configure T otal Acces s 6XX A TM applic a tions by following the order of the top-level menus. For example, first configure th e system parameters using the S YSTEM I[...]

Total Access 600 Series System Manual Section 4 User Interface Guide 61200624L1-1B © 2004 ADTRAN, Inc. 181 . 2. Configuring th e Layer 2 Protocol For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Layer 2 A TM Network Interface Pr otocol men us beginning on page 1 01 Ethernet Interfac e Set[...]

Section 4 Use r Interface G uide Total Access 600 Series Sy stem Manual 182 © 2004 ADTRAN, Inc. 61200624L1-1B 3. V erifying the Bridge Options For more details on the co nfiguration parameters disc ussed in this section, re fer to the following pages: Bridge menus beginnin g on page 1 17 9 Set mode to R OUTE IP . Using this menu you also have the [...]

61200624L1-1B © 2004 ADTRAN, Inc. 183 DETAIL LEVEL PROCEDURES DLP-1 C onnecting a VT100 Terminal or PC to the CRAFT Port . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 DLP-2 Logging in to the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 DLP-3 Setting IP Parameters . . .[...]

Section 5 Detail Level Procedures Total Access 600 Series System Manual 184 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 185 DLP-1 Connecting a VT100 T erminal or PC to the CRAFT Port Introduction T otal Access 6XX shelf management an d provisioning are facilitated by a series of intuitive menus that are accessible on a computer screen. Connecting either a VT10 0 terminal or a PC emulating a VT100 terminal to the RJ-48 CRAFT port on[...]

Section 5 DLP-1 Total Access 600 Series System Manual 186 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connecting a VT10 0 terminal to T o tal Access 6XX : 2. Connect a PC emulating a VT -100 terminal to T otal Access 6XX. Most personal computers (PCs) or laptops can ru n communications software that emulates a VT100 terminal. Examples include W ind ows p[...]

61200624L1-1B © 2004 ADTRAN, Inc. 187 DLP-2 Logging in to the System Introduction Once connected to the T otal Access 6XX, you must logi n to the system to gain access to the management and provisioning functions. This DLP assumes you ar e connected to the T otal Access 6XX and provides specific steps for logg ing into the system. Prerequisite Pro[...]

Section 5 DLP-2 Total Access 600 Series System Manual 188 © 2004 ADTRAN, Inc. 61200624L1-1B 1. After connecting to the system, press any key to display the Login screen shown here. The blinking cursor at the Login field indicate s that a password must be entered. 2. Enter the password for the T otal Acc ess 6XX at th e Login field. There is no man[...]

61200624L1-1B © 2004 ADTRAN, Inc. 189 DLP-3 Setting IP Parameters Introduction If the T otal Access 6XX is connected to an IP networ k for T elnet, TFTP , or SNMP management, there are several IP parameters which must be set for the unit to communicate with the ne twork. These parameters are described in this DLP along with the procedures for sett[...]

Section 5 DLP-3 Total Access 600 Series System Manual 190 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect the T otal Access 6XX un it to your VT100 system (details found in DLP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2. Log in to the system. 3. From the R OUTER /C ONFIG menu, select the I NT ERFACES option and press <Enter> .[...]

61200624L1-1B © 2004 ADTRAN, Inc. 191 DLP-4 V erifying Communica tions Over an IP LAN Introduction When the Ethe rnet port is conn ecte d to a local area network (LAN), test steps must be performed on the T otal Access 6XX to ensure that the unit is communi cating properly over the network. This procedure outlines those steps. Prerequisite Procedu[...]

Section 5 DLP-4 Total Access 600 Series System Manual 192 © 2004 ADTRAN, Inc. 61200624L1-1B 1. V erify the T otal Access 6XX IP address. If you do not already have the IP Address for th e T otal Access 6XX, obtain it from the network administrator or manually check for the address in the R OUTER C ONFIG /I NTERFACE /S ETUP /P RIMARY IP/IP A DDRESS[...]

Total Access 60 0 Series Syste m Manual Section 5 DLP-4 61200624L1-1B © 2004 ADTRAN, Inc. 193 From the same computer used in the previous step, T elnet to th e T otal Access 6XX and verify that the T elnet session is properly opened (se e DLP-5, Connecting to the Unit Using T elnet ). On ce the T elne t session is established, press < CTRL+L &g[...]

Section 5 DLP-4 Total Access 600 Series System Manual 194 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 195 DLP-5 Connecting to the Unit Using T elnet Introduction If the T otal Access 6XX is part of a management cluste r connected to the local network, you may use a PC connected to the network to T elnet into the unit. This procedure details the st eps whic h mu st be performed to T elnet into the unit. Prerequisit[...]

Section 5 DLP-5 Total Access 600 Series System Manual 196 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect the computer to the T otal Acces s 6XX CRAFT interface (details in D LP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2. Log in to the unit. 3. Select the S YSTEM C ONFIG /M ANAGEMENT /T ELNET A CCESS menu and set the T ELNET A CCESS[...]

Total Access 60 0 Series Syste m Manual Section 5 DLP-5 61200624L1-1B © 2004 ADTRAN, Inc. 197 1 1. Press <CTRL+ L> to log off the T otal Access 6XX terminal menu system. 12. From a remote com puter sy stem conne cted to the LAN, T elnet to the T ota l Access 6XX. The following screen appe ars. 13. Enter the user name assig ned in step 5 and [...]

Section 5 DLP-5 Total Access 600 Series System Manual 198 © 2004 ADTRAN, Inc. 61200624L1-1B 14. Enter the password assigne d in step 6. After entering the correct password, the T otal A ccess 6XX main menu is displayed (see belo w): 15. After completing your configurat ion changes they are auto matically saved (or manually save them by pressing &l[...]

61200624L1-1B © 2004 ADTRAN, Inc. 199 DLP-6 Adding/Removing Users and Changing Password Security Levels Introduction All menu items in the T otal Access 6XX are protect ed by passwords of varying security levels. By assigning different passwords to different security le vels, the T otal Access 6X X System Administrator can control which users can [...]

Section 5 DLP-6 Total Access 600 Series System Manual 200 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using either the 10/100BASET or CRAFT inte rface. If you are not already connected to the unit’ s CRAFT interface (either with a VT100 compatible terminal or with a PC running VT100 emulatio n software), follow the proc[...]

Total Access 60 0 Series Syste m Manual Section 5 DLP-6 61200624L1-1B © 2004 ADTRAN, Inc. 201 8. Determine the password le vel for the co rrespondin g label. The T otal A ccess 6XX cont ains seven diff erent password levels. The following chart gi ves a brief description of ea ch level. 9. Assign the password level to the appropriate label by sele[...]

Section 5 DLP-6 Total Access 600 Series System Manual 202 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 203 DLP-7 Updating the Firmware using TFTP Introduction The T otal Access 6XX supports firmware updates using TFTP or XMODEM. (Use the 10/100BASET Ethernet port and TFTP from a network server , or use XMODEM and the rear CRAFT interfaces.) This DLP provides the steps for a successf ul firmware upgrade using the 10[...]

Section 5 DLP-7 Total Access 600 Series System Manual 204 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using the 10/100BASET interfac e. If you are not already connected to the unit’ s ETHERNET port using T elnet client software, use the procedure in DLP-5, Connecting to the Unit Usi ng T elnet , to connect to the unit. [...]

Total Access 60 0 Series Syste m Manual Section 5 DLP-7 61200624L1-1B © 2004 ADTRAN, Inc. 205 9. Select S TART T R ANSFER to start the update. Enter Y to confirm th e upgrade . Prior to the start of the upgrade, the transfer status will displ ay I DLE . During the TFTP upload process, various status messages display in C URRENT U PDATE S TAT US to[...]

Section 5 DLP-7 Total Access 600 Series System Manual 206 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 207 DLP-8 Updating the Fi rmware using XMODEM Introduction The T otal Access 6XX supports firmware updates using TFTP or XMODEM. (Use the 10/100BASET Ethernet port and TFTP from a network server , or use XMODEM and the rear CRAFT interface.) This procedure outlines the steps for a successf ul firmware upgrade usin[...]

Section 5 DLP-8 Total Access 600 Series System Manual 208 © 2004 ADTRAN, Inc. 61200624L1-1B Updating Firmware via the Console Menus 1. Connect to the T otal Access 6XX using CRAFT (RJ-48) interface. Selecting a hi gher baud rate connection makes the file transfer pr ocess faster . V e rify that the baud rate setting on the T otal Access 6XX matche[...]

61200624L1-1B © 2004 ADTRAN, Inc. 209 DLP-9 Saving the Current Configuration Using TFTP Introduction The T otal Access 6XX supports c onfiguration transfers from the unit (via the 10/100BASET Ethernet port) to a TFTP server located on the ne twork. This DLP provides the steps to follow for a successful configuration transfer using the 10/100BASET [...]

Section 5 DLP-9 Total Access 600 Series System Manual 210 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using the 10/100BASET interfac e. If you are not already connected to the unit’ s 10/100BA SET port using T elnet client software, use the procedure in DLP-5, Connecting to the Unit Usi ng T elnet , to connect to the un[...]

61200624L1-1B © 2004 ADTRAN, Inc. 211 DLP-10 Loading a Con f iguration Using TFTP Introduction The T otal Access 6XX supports config uration uploads from a unit (via the 10/100BA SET Ethernet port) to a TFTP server located on the network. This DLP provides the steps to fo llow for a successful configuration upload using the 10/100BASET Ethernet po[...]

Section 5 DLP-10 Total Access 600 Series System Manual 212 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using the 10/100BASET interface. If you are not already connected to the unit’ s 10/100BA SET port using T elnet client software, use the procedure in DLP-5, Connecting to the Unit Usi ng T elnet , to connect to the un[...]

61200624L1-1B © 2004 ADTRAN, Inc. 213 DLP-1 1 Saving and T ransferring a Current Configuration Using XMODEM Introduction The T otal Access 6XX supports configur ation transfers from the unit via the CRAFT interface using a VT100 terminal or terminal emulator (with XMODE M). This DLP provides the steps for a successful configuration transfer using [...]

Section 5 DLP-11 Total Access 600 Series System Manual 214 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using the CRAFT (RJ-48) port on the back of the T otal Access 6X X. If you are not already connected to the unit’ s rear CRAFT interface, either with a VT100 compatible terminal or with a PC running VT100 emulation sof[...]

61200624L1-1B © 2004 ADTRAN, Inc. 215 DLP-12 Loading a Config uration Using XMODEM Introduction The T otal Access 6XX supports configuration uploads from a unit via the CRAFT interface using a VT100 terminal or terminal emulator (with XMODEM ). This DLP prov ides the steps for a successful configuration upload using the rear CRAFT port and XMODEM [...]

Section 5 DLP-12 Total Access 600 Series System Manual 216 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect to the T otal Access 6XX using the CRAFT (RJ-48) interface. If you are not already connected to the unit’ s rear CRAFT interface, either with a VT100 compatible terminal or with a PC running VT100 emula tion software, follow the procedure in D[...]

61200624L1-1B © 2004 ADTRAN, Inc. 217 DLP-13 Saving and Loading T ext Configuration using T erminal Command Line Introduction The T otal Access 6XX has the ability to download a text file which contains the config uration of the entire unit. This configuration may then be altered in a text editor and uploaded to any T otal Access 6XX . This DLP wi[...]

Section 5 DLP-13 Total Access 600 Series System Manual 218 © 2004 ADTRAN, Inc. 61200624L1-1B Saving the T otal Access 6XX configuration 1. Establish a connection to the T otal Access 6 XX with th e VT100 te rminal software using the CRAFT port or T elnet via the 10/100BASET Ethe rnet interface. 2. From the main menu, select S YSTEM U TIL ITY , the[...]

Total Access 600 Series System Manual Section 5 DLP-13 61200624L1-1B © 2004 ADTRAN, Inc. 219 5. Enable "capt ure" or "loggin g" in the te rminal so ftware, s aving it to a file on your computer . 6. Press the SP ACE BAR to continue. The unit prints its conf iguration to the terminal screen. (With capture enabled, the terminal s[...]

Section 5 DLP-13 Total Access 600 Series System Manual 220 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 221 DLP-14 A.03 to A.04 Firmware Upgrade Introduction The T otal Access line of Integrated Access Devic es includes both the A T M and TDM versions of the T otal Access 6XX. Until now , the T ota l Access TDM units have been runn ing firmware version A.03.xx. Recently , A.04.xx has been released to support th e TD[...]

Section 5 DLP-14 Total Access 600 Series System Manual 222 © 2004 ADTRAN, Inc. 61200624L1-1B T ools and Materials Required • VT100 compatible terminal or comput er with terminal emulati on software • Appropriate cable to connect term inal to the unit (customer-provided) • DB-9 female to RJ-48 female adapter (A DTRAN proprietary) for connecti[...]

61200624L1-1B © 2004 ADTRAN, Inc. 223 DLP-15 Using the ADTRAN Utility Syslog Introduction The T otal Access 6XX Syslog Utility records various message types at se ttable threshold levels to an external Syslog server (software supplied with the T otal Access 6XX system ADTRAN Utilities). Prerequisite Procedures This procedure assumes that the T ota[...]

Section 5 DLP-15 Total Access 600 Series System Manual 224 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Log in to the system with maximum rights (see DL P-2, Logging in to the System ). Once you have logged into the T otal Access 6XX, go to S YSTEM C ONFIG /S YSLOG . Set the options as follows: • S YSLOG IP : Enter the IP address of the PC where the Sys[...]

Total Access 600 Series System Manual Section 5 DLP-15 61200624L1-1B © 2004 ADTRAN, Inc. 225 . •T h e M ONITOR feature allows all Syslog messages to be prefiltered by S YSTEM N AME , S OURCE , S LOT , and P ORT before displaying these messages to the user and logging the message to the pre-designated monitor log file. Various filter op tions may[...]

Section 5 DLP-15 Total Access 600 Series System Manual 226 © 2004 ADTRAN, Inc. 61200624L1-1B • Under the L OG F ILES menu option, the user may erase log files, define Red events, set priorities, and clear Red events. The E RASE L OG F ILES option erases the spec ified text log file. • D EFINE R ED E VENTS allows the user to predefine a message[...]

64203376L1-1A © 2004 ADTRAN, Inc. 227 DLP-16 Executing T erminal Mode Commands Introduction Once connected to the unit via either a VT100 termi nal or PC configured as a VT100 terminal or via T elnet using the 10/100BASET interface, selecting the terminal mode gi ves the user a command-line prompt to perform utilities such as pings, traceroutes, r[...]

Section 5 DLP-16 Total Access 850 System Manual 228 © 2004 ADTRAN, Inc. 64203376L1-1A 1. Connect to the unit usin g either the 10/100BA SET or CRAFT interfaces. If you are not already connected to the unit’ s CRAFT interface (either with aVT100 compatible terminal or with a PC running VT100 emulatio n software), follow the procedure in DLP-1, Co[...]

Total Access 850 System Manual Section 5 DLP-16 64203376L1-1A © 2004 ADTRAN, Inc. 229 j. Perform a traceroute or extended traceroute. Syntax is: traceroute host name/address [hops xx] [timeout xx] [retries xx ] [source xx] [noNat ] Options: hops <hops co unt> Max number of h ops (default 30) timeout <seconds> T imeout in seconds (defau[...]

Section 5 DLP-16 Total Access 850 System Manual 230 © 2004 ADTRAN, Inc. 64203376L1-1A[...]

61200624L1-1B © 2004 ADTRAN, Inc. 231 DLP-17 Configuring Dual T1 Maps Introduction T otal Access 6XX T1 TDM systems with the optional DSX-1 interface have a D UAL T1 M AP feature that allows two network T1 connections for the termination of data an d voice applications. The primary network T1 M AP can be configured for internal router usage (FT1/2[...]

Section 5 DLP-17 Total Access 600 Series System Manual 232 © 2004 ADTRAN, Inc. 61200624L1-1B 1. Connect the T otal Access 6XX un it to your VT100 system (details found in DLP-1, Connecting a VT100 T erminal or PC to the CRAFT Port ). 2. Log in to the system with maximu m rights (details ar e in DLP-2, Logging in to the System ). 3. From the DS0 M [...]

Total Access 600 Series System Manual Section 5 DLP-17 61200624L1-1B © 2004 ADTRAN, Inc. 233 5. Edit the Primar y T1 Map by pressing <Enter> on E DIT /V IEW T1 M AP [+] .The following screen appears. Figure 2. Primary T1 Map The T1 Map can b e mapped to the internal r outer or other available interfaces.[...]

Section 5 DLP-17 Total Access 600 Series System Manual 234 © 2004 ADTRAN, Inc. 61200624L1-1B 6. Edit the Se condary T1 Map (DSX Ma p) by pressing <Enter> on E DIT /V IEW DSX M AP [+] . The following screen appears. Figure 3. DSX M ap 7. Left arrow back to DS0 M APS and log off by pressing <CTRL+L> . The DSX Map can be mapped to the FXS[...]

61200624L1-1B © 2004 ADTRAN, Inc. 235 DLP-18 Unit Installation Us ing the Auto-Config Feature Introduction A UTO -C ONFIG allows the service provider to gain initial acces s to a newly installed IAD while in its factory default state. This eliminates the need for a skilled technician on-site duri ng installation, as it only requires someone to mak[...]

Section 5 DLP-18 Total Access 600 Series System Manual 236 © 2004 ADTRAN, Inc. 61200624L1-1B 1. V eri fy the unit is at factory de fault. 2. Connect the network inte rface cable to the NTWK port on the rear of th e unit. 3. Power up the unit. 4. Using DS0 24 (mapped to the router by defa ult), t he unit begins the process of auto-detecting whether[...]

Total Access 600 Series System Manual Section 5 DLP-18 61200624L1-1B © 2004 ADTRAN, Inc. 237 5. Once the L2 protocol detection is c omplete, the service pr ovider can t elnet into the unit using th e IP address assign ed by the router/DH CP server . 6. Load the desired configura tion file. The config file may be one of the following two formats: ?[...]

Section 5 DLP-18 Total Access 600 Series System Manual 238 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 239 DLP-19 TDM to A TM Upgrade Introduction The Echo Canceller Module p rovides G.165/G.168 echo cancellation for voice ov er A TM applications and is available with Adaptive Dif ferential Pulse Code Modulation (ADPCM). ADPCM is a speech coding method which uses fewer bits than traditional Pulse Code Modulation (P[...]

Section 5 DLP-19 Total Access 600 Series System Manual 240 © 2004 ADTRAN, Inc. 61200624L1-1B The upgrade package may be purchased from ADTR AN. This package include s the EC/ADPCM (P/N 1200613L1) and the ADTRAN installation and test . If this package is ordered, the customer must send the T otal Access TDM 612/616/624 unit back to ADTR AN. Once re[...]

Total Access 600 Series System Manual Section 5 DLP-19 61200624L1-1B © 2004 ADTRAN, Inc. 241 9. Factory default the T otal Access 612/616/624 by one of the following methods: • Select S YSTEM U TILITY > T ERMINAL M ODE . At the > pro mpt, type factory_reset . You will then see “Restore Factory Defaults and Reset Unit? (press Y ).” Pres[...]

Section 5 DLP-19 Total Access 600 Series System Manual 242 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 243 ADTRAN UTILITIES This section provides instructio ns for configuring and using the ADTRAN Utilities so ftware programs including T elnet, VT10 0, Syslog, and TFT P . ADTRAN delivers several PC software utilities with the T otal Access 600 Series. These utilities are located on the CD-ROM that came with your sh[...]

Section 6 ADTRAN Utilities Total Access 600 Series System Manual 244 © 2004 ADTRAN, Inc. 61200624L1-1B 1. T ELNET UTILITY Access the T elnet program remotely through the Ethern et port. For a detailed description of how to work within the terminal menu, refer to Navigating the T erminal Menu on page 43 (in the User Interface Guide section of this [...]

Total Access 600 Series System Manual Section 6 ADTRAN Utilities 61200624L1-1B © 2004 ADTRAN, Inc. 245 Session Menu Click on S ESSION to open the T elnet session. Connect Opens dialog box for setting H OST N AME and P ORT parameters for a T elnet session. Also lets you E DIT E NTRY , A DD N EW entry , and D ELETE stored entries. When the parameter[...]

Section 6 ADTRAN Utilities Total Access 600 Series System Manual 246 © 2004 ADTRAN, Inc. 61200624L1-1B Disconnect T erminates the T elnet session. T o re-establish the session, select C ONNECT from S ESSION M ENU or press E NTER three times. This action restores the previous connection. T ran sfer Cfg This feature is used with ADTRAN products to s[...]

Total Access 600 Series System Manual Section 6 ADTRAN Utilities 61200624L1-1B © 2004 ADTRAN, Inc. 247 Help Menu Provides online help for using the ADTRAN Utilities. Contents Opens the online help. IP Status Displays the local port address an d the status of the connection. About Displays version and owner information. 2. VT100 UTILITY Use the VT1[...]

Section 6 ADTRAN Utilities Total Access 600 Series System Manual 248 © 2004 ADTRAN, Inc. 61200624L1-1B Session Menu Opens VT100 terminal emulation session. Connect Opens a specified serial port for a VT100 session. Disconnect Closes a specified serial port at the end of a VT100 session. File T ransfer Uploads and downloads f iles to and from a uni[...]

Total Access 600 Series System Manual Section 6 ADTRAN Utilities 61200624L1-1B © 2004 ADTRAN, Inc. 249 Capture Menu Identical to the T elnet C APTURE M ENU (see Captur e Menu on page 246). Help Menu Provides online help and inform ation about the version number . Contents Opens online help. About Displays version and owner information. 3. TFTP SER[...]

Section 6 ADTRAN Utilities Total Access 600 Series System Manual 250 © 2004 ADTRAN, Inc. 61200624L1-1B Figure 4. TFTP Server Interface Only one configuration transfer session (upload or download) may be active at a time. The TCP/IP parameters are not saved or o verwritten as part of a unit’ s transferre d configuration to allow sending identical[...]

Total Access 600 Series System Manual Section 6 ADTRAN Utilities 61200624L1-1B © 2004 ADTRAN, Inc. 251 Help Provides online help a nd version information. Contents Opens online help. About Displays version and owner information. 4. STATUS FIELD This field displays general informatio n about port and transfer status. This field is read-only . The u[...]

Section 6 ADTRAN Utilities Total Access 600 Series System Manual 252 © 2004 ADTRAN, Inc. 61200624L1-1B[...]

61200624L1-1B © 2004 ADTRAN, Inc. 253 MIBS This section is divided into two parts: (1) SNMP in formation for TDM units and (2) SNMP informa tion for A TM units. Each section details th e Management Information Ba ses (MIBs) supported, MIB Co mpilation Order , T raps Supported, and MIB V ariables supported. C ONTENTS MIBs Supported by TDM Units . .[...]

Section 7 MIBs Total Access 600 Series System Manual 254 © 2004 ADTRAN, Inc. 61200624L1-1B 1. MIBS SUPPORTED BY TDM UNITS All TDM MIBs ar e SNMPv2. Standard RFC MIBs: RFC1573.mi2 IANAifT ype-MIB RFC1907.mi2 SNMPv2-MIB RFC201 1.mi2 IP-MIB RFC2096.mi2 IP-FORW A RD-MIB RFC21 15.mi2 FRAME-RELA Y-DTE-MIB RFC2493.mi2 PerfHist-TC-MIB RFC2494.mi2 DS0-MIB [...]

Total Access 600 Series System Manual Section 7 MIBs 61200624L1-1B © 2004 ADTRAN, Inc. 255 2. MIB COMPILATION ORDER FOR TDM UNITS 3. T RAPS SUPPORTED BY TDM UNIT S IANAifT ype-MIB PerfHist-TC-MIB SNMPv2-MIB (if not included with SNMP manager) IF-MIB IP-MIB IP-FORW ARD-MIB FRAME-RELA Y-DTE-MIB DS1-MIB DS0-MIB DS0BUNDLE-MIB EtherLike-MIB ADTRAN-MIB [...]

Section 7 MIBs Total Access 600 Series System Manual 256 © 2004 ADTRAN, Inc. 61200624L1-1B 4. MIB V ARIABLES SUPP ORTED BY TDM UNITS SNMPv2 states the su pported MIB variables by the follo wing method: The unit will have a MIB called T A 6XX.mi2 that w ill describe the SNMP variab les supported. This MIB will contain an Agent Capabilities module t[...]

Total Access 600 Series System Manual Section 7 MIBs 61200624L1-1B © 2004 ADTRAN, Inc. 257 tcp: tcpRtoAlgorithm RO tcpRtoMin RO tcpRtoMax RO tcpMaxConns RO tcpActiveOpens RO tcpPassiveOpens RO tcpAttemptFails RO tcpEstabResets RO tcpCurrEstab RO tcpInSegs RO tcpOutSegs RO tcpRetransSegs RO tcpConnT able tcpConnE ntry tcpConnState RO tcpConnLocalAd[...]

Section 7 MIBs Total Access 600 Series System Manual 258 © 2004 ADTRAN, Inc. 61200624L1-1B egp: egpInMsgs RO egpInErrs RO egpOutM sgs RO egpOutErro rs RO egpNeighS tate RO egpNeigh Addr RO egpNeighA s RO egpNeighInM sgs RO egpNeigh InErrs RO egpNeighOutMsgs RO egpNeighOu tErrs RO egpNeigh InErrMsgs RO egpNeighOu tErrMsgs RO egpNeighS tateUps RO eg[...]

Total Access 600 Series System Manual Section 7 MIBs 61200624L1-1B © 2004 ADTRAN, Inc. 259 dsx1CurrentEntry dsx1Curren tIndex RO dsx1CurrentESs RO dsx1CurrentSESs RO dsx1CurrentSEFs RO dsx1CurrentUASs RO dsx1CurrentCSSs RO dsx1CurrentPCVs RO dsx1CurrentLESs RO dsx1CurrentBESs RO dsx1Curr entLCVs RO dsx1IntervalT able dsx1Inte rvalEntry dsx1Inte rv[...]

Section 7 MIBs Total Access 600 Series System Manual 260 © 2004 ADTRAN, Inc. 61200624L1-1B dsx1Frac Index RO dsx1Frac Number RO dsx1FractIfIndex RO snmp: snmpInPkts RO snmpOutPkts RO snmpInBadV ersions RO snmpInBadCommunityNames RO snmpInBadCommunityUses RO snmpInASNParseErrs RO snmpInT ooBigs RO snmpInNoSuchNames RO snmpInBadV alues RO snmpInRead[...]

Total Access 600 Series System Manual Section 7 MIBs 61200624L1-1B © 2004 ADTRAN, Inc. 261 atmInterfac eEntry atmInterfa ceMaxVpcs RO atmInterfa ceMaxVccs RO atmInterfa ceConfVpcs RO atmInterfa ceConfVccs RO atmInterfa ceMaxActiveV piBits RO atmInterfa ceMaxActiveVciBit s RO atmInter faceIlmiVpi RO atmInterfa ceIlmiVci RO atmInterfaceAddressT ype [...]

Section 7 MIBs Total Access 600 Series System Manual 262 © 2004 ADTRAN, Inc. 61200624L1-1B atmVclT ransmitT raf ficDescrIndex RO atmVccAal T ype RO atmVccAal5CpcsT ransmitSduSize RO atmVccAal5CpcsReceiveSduSize RO atmVccAal5EncapsT ype RO atmVclCrossConnectIdentifie r RO atmVclRowStatus RO aal5VccT able aal5VccEntry aal5VccVpi RO aal5VccVci RO aal[...]