AEG F 88002 VI manual

FAVORIT 88002 DISHWASHER USER MANUAL[...]

CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DE SCRIPTIO N 7 CONTR OL PANEL 8P R O G R A M M E S 10 OPTIONS 11 BEFORE FIRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLE SHOOTING 21 INSTALL ATION 22 TE CHNICAL INFOR MATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help prote[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INFORMATION Before the installatio n and use of th e appliance, carefully read the supplied instructions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Al- ways keep the instructions with the ap- pliance for future ref erence. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suf[...]

• Connect the mains plug to the mains socket only at the end of the in stalla- tion. Make sure that there is access to the mains plug after the installa- tion. • Do not pull the mains cable to dis- connect the appliance. A lways pull the mains plug. • Only for UK and Ireland. The appli- ance has a 13 amp mains plug. If it is necessary to chan[...]

PRODUCT DESCRIPTION 1 2 3 4 5 6 9 11 7 8 13 10 12 1 Worktop 2 Top spray arm 3 Upper spray arm 4 Lower spray arm 5 Filters 6 Rating plate 7 Salt container 8 Water hardness dial 9 Rinse aid dispenser 10 Detergent dispenser 11 Cutlery basket 12 Lower basket 13 Upper basket 6[...]

CONTROL PANEL 1 3 4 5 6 7 9 2 8 AB C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchpad Indicators Description Multitab indicator. ÖKO PLUS indicator. ExtraHygien e indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator.[...]

PROGRAMMES Programme Type of soil Type of load Programme phases Options 1) All Crockery, cutler y, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ExtraHygiene ÖKO PLUS 2) Heavy soil Crockery, cutler y, pots and pans Prewash Wash 70 °C Rinses Dry ÖKO PLUS 3) Normal s oil Crockery and cut- lery Prewash Wash 50 °C Rinses Dry 4) Fresh soil [...]

Consumption v alues Programme 1) Energy (kWh) Water (l) 0.9 - 1.7 8 - 15 1.4 - 1.6 13 - 14 1.1 - 1.2 9 - 11 0.8 9 0.9 - 1.0 9 - 11 1.3 - 1.5 14 - 15 0.8 - 0.9 11 - 12 0.1 4 1) The display shows the programme duration. The water pressure and temperature, the variations of the mains supp ly, the options and the quantity of dishes can change the progr[...]

OPTIONS MULTITAB FUNCTION Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse a id and salt. The related indicators are off. The programme duration can increase. ÖKO PLUS This function decreases the tempera- ture in the drying phase. The energy consumption decreases by 25%. The dishes c[...]

BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees w ith the water hardness in your area. If not, adjust the water softener. Contact your lo- cal water authority t o know the wa- ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the w ater tap . 5. Processing residues can stay[...]

Manual adjustment Turn the water hardness dial to t he po- sition 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators ( A ), ( B ) and ( C ) flas[...]

FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas h- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), [...]

DAILY USE 1. Open the w ater tap . 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the deter[...]

USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only deterge nts for dish- washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner pa rt of the ap- pliance door. 4. If you use detergent[...]

• The display shows the pro- gramme duration tha t decreases with steps of 1 minute. Starting a programme with delay start 1. Set the programme and the op- tions. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). • The delay time flashes in the dis- play. • The delay indicator is on. 3[...]

CARE AND CLEANING WARNING! Before maintenance, deactivate the ap- pliance and disconnect th e mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults . Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( A ) counter- clockwise and remove it. 2. T[...]

TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the prob- lem (refer to the table). If not, contact Service. With some prob lems, the dis play shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. [...]

THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled. The spray ar ms are clog- ged. Remove remaining soil wi[...]

Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient . Increase the released quanti- ty of rinse ai d. The quality of [...]

INSTALLATION WARNING! Refer to “SAFETY INFOR MA- TION”. INSTALLATION UNDER A KITCHEN COUNTER 570-600 mm 600 mm 820 mm 1. Make sure that the dimen- sions of the recess agree with the dimensions in the figure. 2. Put the appliance adjacent to a water tap and a water drain. 4 3 2 1 3. Remove the worktop of the appliance. 4. Loosen or tighten the a[...]

WATER DRAIN CONNECTION max. 4000 mm min. 400 mm max. 850 mm Connect t he water drai n hose to: • The sink spigot. Attach the water drain hose under the kitchen counter. This prevents that waste wa ter from the sink goes back to the appliance. • A stand pipe with vent-hole. Th e in- ternal diameter must be minimum 40 mm. Remove the sink plug whe[...]

ENGLISH 23[...]

www.aeg.com/shop 117931430-B- 192011[...]