Ir para a página of
Manuais similares
-
Switch
Agilent Technologies 75000 SERIES B
244 páginas 4.38 mb -
Switch
Agilent Technologies Switch/Measure
216 páginas 3.68 mb -
Switch
Agilent Technologies 34970A
438 páginas 6.58 mb -
Switch
Agilent Technologies 5185-5991
2 páginas 0.26 mb -
Switch
Agilent Technologies 01664-97005
164 páginas 1.97 mb -
Switch
Agilent Technologies 34970A
20 páginas 0.31 mb -
Switch
Agilent Technologies L4445A
10 páginas 0.33 mb -
Switch
Agilent Technologies E1442-90003
106 páginas 2.71 mb
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Agilent Technologies 87130A. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoAgilent Technologies 87130A vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Agilent Technologies 87130A você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Agilent Technologies 87130A, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Agilent Technologies 87130A deve conte:
- dados técnicos do dispositivo Agilent Technologies 87130A
- nome do fabricante e ano de fabricação do dispositivo Agilent Technologies 87130A
- instruções de utilização, regulação e manutenção do dispositivo Agilent Technologies 87130A
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Agilent Technologies 87130A não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Agilent Technologies 87130A e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Agilent Technologies na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Agilent Technologies 87130A, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Agilent Technologies 87130A, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Agilent Technologies 87130A. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
87130A Attenuator/Switch Driver Operating and Service Guide Manual par t number: 87 130-90007 Printed in USA August 2001 Supersede s: May 2000[...]
-
Página 2
ii Agilent 87130A Operating and Service Manual Notice The infor mation containe d in this document is subject t o change wit hout notice. Agilent T echnologi es makes no warranty o f any kind with regard t o this materia l, including, but not li mited to, the implied war ranties of merchanta bility and fitness for a part icular pur pose. Agile nt T[...]
-
Página 3
Agilent 87130A Operating and Service Manual iii Wa r r a n t y Certific atio n Agilent T echnolog ies, Inc., certifies that thi s pr oduct met its p ublished spec ific atio ns a t the time of sh ipme nt from the fac tory . Ag ilent T ech nolo gie s further certif ies that its cali bration me asur ements ar e traceable to the United St ates Nati ona[...]
-
Página 4
iv Agilent 87130A Operating and Service Manual W ARRANTIES OR MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE. EXCLUSIVE REMEDIES. THE REMEDIES PROVIDED HEREIN ARE BUYER ’ S SOLE AND EXCLUSIVE REMEDIES. AGILENT TECHNOLOGIES SHALL NOT BE LIABLE FOR ANY DIRECT , INDIRECT , SPECIAL, INCIDENT AL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CON[...]
-
Página 5
Agilent 87130A Operating and Service Manual v Service and Support Any adjust ment, mainte nance, or repa ir of th is product must be perfo rmed by quali fied pers onnel. Cont act your c ustomer engi neer thr ough your loca l Agilent T echnologi es Servi ce Center . Y ou can find a list o f local ser vice repres entatives on the W eb at: www.agilent[...]
-
Página 6
vi Agilent 87130A Operating and Service Manual Safety and Regulatory Infor mation Review this prod uct and re lated docu mentation to famili arize you rself wit h safety markings and inst ructions bef ore you ope rate the instrument. Thi s product has been des igned and t ested in accordanc e with int ernational standar ds. W ARNING The W ARNING no[...]
-
Página 7
Agilent 87130A Operating and Service Manual vii Safety Earth Ground This is a Safety Class I prod uct (prov ided with a pr otective earthing terminal ). An uninter ruptibl e safety ea rth ground must be provided fro m the main power s ource to the product input wiri ng terminal s, power cord, o r supplie d power cord set. Wheneve r it is likel y th[...]
-
Página 8
viii Agilent 87130A Operating and Service Manual General Safety Consi derations W ARNING • This product has b een designed and te sted in accordance with IEC Publication 1010, Safety Requireme nts for Electronic Meas uring Apparatus, and has been supplied in a safe condition. The instruction documentation co ntains information and w arnings which[...]
-
Página 9
Agilent 87130A Operating and Service Manual ix[...]
-
Página 10
x Agilent 87130A Operating and Service Manual T ypeface C onventions Itali cs • Used to emphasi ze importa nt infor mation: Use this software onl y with the 87130A. • Used for t he titl e of a publ ication : Refe r to t he Agilent 8713 0A Operating and Servic e Manual . • Used to ind ica te a v ari abl e: T ype LOAD BIN filen ame . Instrument[...]
-
Página 11
Contents Agilent 87130A Operating and Service Manual Contents-1 1. Introducing t he 87130A Atte nua tor /Sw itch Dr ive r Feature s of the Attenuat or/Switch Driver . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Figur e 1-1. 87130A Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 1- 2 Drive Pulse and Sensing . . . . . . . . . [...]
-
Página 12
Contents-2 Agilent 87130A Operating and Service Manual Figur e 2-7. Daisy Chain of Driver Ca r ds in Si ngle Enclo sur e . . . . 2-8 Figur e 2-8. Daisy Chain of Driver Ca r ds in Dif fer ent Enclosur es . 2-8 Connecting At tenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Figur e 2-9. T ypical Atten uator Cable s C[...]
-
Página 13
Agilent 87130A Operating and Service Manual Contents-3 *IDN (Identi fication Number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 *OPC (Operation Compl ete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4- 17 *RST (Reset ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]
-
Página 14
Contents-4 Agilent 87130A Operating and Service Manual Figur e 4-1. T iming Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-77 5. Replaceable Pa rts Accessory Boar ds and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 T able 5-1. Accesso ries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]
-
Página 15
Agilent 87130A Operating and Service Manual 1-1 1 Intr oducing the 87130A Attenuator/Switch Driver Overview I n this cha pter you wi ll find: • Function , feature s, and capabil ities of t he 87130A att enuator/ switch drive r • How to unpac k and check y our instrument • How to set up a stat ic-f ree wo rk stat ion • How to cont act Agilen[...]
-
Página 16
1-2 Agilent 87130A Operating and Service Manual Introducing the 87130A Attenuator/Switch Driver Features of th e Attenuator/Switch Driver Features of the Attenuator/Swit ch Drive r The Agilen t 87130A att enuator/swi tch drive r is a GPIB compat ible instru ment design ed to driv e electr omechanical switches and step attenua tors. • The stand ar[...]
-
Página 17
Agilent 87130A Operating and Service Manual 1-3 Introducing the 87130A Attenuator/Switch Driver Features of t he Attenuator/Switch Driver Drive Puls e and Sensing The atte nuator/s witch dri ver can del iver 500 mA, 2 4 Vdc curren t pulses to 31 indivi dual swit ch secti ons and up t o a total of 248 swit ch sections by the additi on of exte rnal 8[...]
-
Página 18
1-4 Agilent 87130A Operating and Service Manual Introducing the 87130A Attenuator/Switch Driver Features of th e Attenuator/Switch Driver Compa tible S witch es and Attenuators The atte nuator/ s witch dri ver is de signed to drive Agil ent switches and attenua tors shown in the ta bles belo w . NOTE If you ar e using s witches or at tenuator s mad[...]
-
Página 19
Agilent 87130A Operating and Service Manual 1-5 Introducing the 87130A Attenuator/Switch Driver Features of t he Attenuator/Switch Driver Front Panel Featur es The front panel LEDs i ndicate the status o f the 87130 A atten uator/switc h driver . The front -panel LEDs s hould turn on a nd of f while t he switch d river is perf orming the self-te st[...]
-
Página 20
1-6 Agilent 87130A Operating and Service Manual Introducing the 87130A Attenuator/Switch Driver Unpacking Your Instru ment Unpacking Y our Instrument Unpack and i nspect t he shippi ng contain er and it s contents thoroughl y to ensure t hat nothing was damaged duri ng shipment. If the shipping co ntainer or cushi oning materia l is damaged, t he c[...]
-
Página 21
Agilent 87130A Operating and Service Manual 1-7 Introducing the 87130A Attenuator/Switch Driver Unpacking Your Inst rument Figure 1-3 Packaging Mat erials for the 87130A Sw itch Driver Item Quantity Part Number Description 1 1 921 1- 6365 Outer carton 2 1 5181-5515 Foam In sert 3 Foam insert (Part of item 2.) 4 1 5181-5535 Spacer[...]
-
Página 22
1-8 Agilent 87130A Operating and Service Manual Introducing the 87130A Attenuator/Switch Driver Before Installing th e Attenuator/Switch Driver Befor e Installing the At tenuator/Switch Driver Electr ostatic dischar ge ( ESD) can d amage or d estroy e lectron ic componen ts. All work pe rformed on assemblies consist ing of ele ctronic compon ents s[...]
-
Página 23
Agilent 87130A Operating and Service Manual 1-9 Introducing the 87130A Attenuator/Switch Driver Before Installing t he Attenuator/Switch Driver Reducing ES D Damage T o help reduce the amount of ESD damage tha t occurs during ins tallation , testi ng, or serv icing ins truments u se the follo wing gui delines: • Be sure t hat all i nstruments a r[...]
-
Página 24
1-10 Agilent 87130A Operating and Service Manual Introducing the 87130A Attenuator/Switch Driver Returning Your Instrum ent for Service Returning Y our Instrument for Service T o obtain serv icing inf ormation o r to order r eplacement parts, co ntact your nearest Agilent T echnol ogies Servic e Center l isted under “ Service and Support ” on p[...]
-
Página 25
Agilent 87130A Operating and Service Manual 2-1 Installing the 87130A Attenuator/Switch Driver 2 Installing the 87130A Attenuator/Switch Driver Overview I n this cha pter you wi ll lear n about: • How to inst all your switch drive r • How to veri fy its ba sic func tionality • How to addre ss your inst rument • How to conne ct it to a switc[...]
-
Página 26
2-2 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Getting Start ed Gettin g Started Initi al Insp ecti on 1. Unpack and inspect the sh ipping cont ainer and it s content s thorough ly to ensure t hat nothing wa s damaged dur ing shipmen t. If the shi pping contain er or cush ioning material is damaged, t[...]
-
Página 27
Agilent 87130A Operating and Service Manual 2-3 Installing the 87130A Attenuator/Switch Driver Getting Started GPIB Addr essing 3. Use the f ive-bit binary add ress swit ches loca ted on the rear pane l of the instru ment to c hange the GPIB address. ❍ The 87130A has a factor y preset a ddress of 9. There are 32 po ssible address es. The sw itch [...]
-
Página 28
2-4 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s Connecting Switc h Drivers to Swit ches and Attenuators Driver Boar ds The stand ard 87130A at tenuator /switch d river has a single interna l driver board capable of driv ing 31 switche s. The atten[...]
-
Página 29
Agilent 87130A Operating and Service Manual 2-5 Installing the 87130A Attenuator/Switch Driver Connecting Switch Drivers to Switches and Attenuato rs Using External Drivers A standard switc h driver can contr ol up to se ven extern al 84940A drive r car ds. ❍ Each dri ver card ha s 31 4-pin black out put connector s numbere d J1 to J31 ( silkscr [...]
-
Página 30
2-6 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s CAUTION Do not c onnect or disconn ect rel ays from 84940A ext ernal driv er ca rds with prefix es prior to US4016 whil e the attenu ator/swi tch drive r line switc h is turned o n. An uninten tional[...]
-
Página 31
Agilent 87130A Operating and Service Manual 2-7 Installing the 87130A Attenuator/Switch Driver Connecting Switch Drivers to Switches and Attenuato rs W iring Channel Connector s When ins talling th e switch dr iver , it is impe rative t o know which wi res will cause an OPEN or CLOSE cond ition on e ach switch. • An OPEN condit ion is defin ed as[...]
-
Página 32
2-8 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s Connecting Multiple Driver Cards The cards are numb ered from 1 to 8 ; the rel ays on eac h card are numbered from 0 to 30. E ach re lay is re ferr ed to a s a c han nel by the switc h d rive r . The[...]
-
Página 33
Agilent 87130A Operating and Service Manual 2-9 Installing the 87130A Attenuator/Switch Driver Connecting Switch Drivers to Switches and Attenuato rs Connecting Attenuators Connect a ttenuat or cable s using a V iking connector and a t en pin c onnector . A typical connecti on of four se ction att enuators is shown be low . When conn ecting at tenu[...]
-
Página 34
2-10 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s Optimizing S witching Speed T o increase th e speed at which your sw itch matrix o perates, re fer to the tab le below to determine wh ich fou r relays, when connected , will be on the same drive l [...]
-
Página 35
Agilent 87130A Operating and Service Manual 2-11 Installing the 87130A Attenuator/Switch Driver Connecting Switch Drivers to Switches and Attenuato rs Driver Car d Address Set the 4- bit DIP switc h on the 84940A dri ver assembly ca rd to each add ress as sho wn in the figur e be low . (S 1 “ up ” is ope n or awa y fr om th e PC b oa rd.) Each [...]
-
Página 36
2-12 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s 7061 1-6001 1, and 70612-6001 1 cables o f #28 A WG wire size , at a tot al cable le ngth of 32.8 fee t from the 87130 A would have a volta ge of 20.3 v olts availa ble at th e driver b oard. (21.5 [...]
-
Página 37
Agilent 87130A Operating and Service Manual 2-13 Installing the 87130A Attenuator/Switch Driver Connecting Switch Drivers to Switches and Attenuato rs Pin Functions for 36-Pin I/O Data Cable • The stand ard switc h driver has a high densi ty male, 36-pi n SCSI II t ype connecto r . • The stand ard I/O dat a cable is a five-f oot 28 A WG cable w[...]
-
Página 38
2-14 Agilent 87130A Operating and Service Manual Installing the 87130A Attenuator/Switch Driver Connecting Switch Dr ivers to Switches and Attenuator s Pin Function s for 68-pin Driver Output Connector • The 87130A ha s a rear -panel 68-pin c onnector for drivi ng attac hed switches . The standar d output cab le is a six- foot 28 A W G cable wit [...]
-
Página 39
Agilent 87130A Operating and Service Manual 3-1 3 Specifica tions Overview Pe rformance specific ations a re the per formance s tandards o r limits aga inst which the 87130A can be tested. The specifi cations are or ganized into two categor ies: • Measurement relate d specifi cations which des cribe warra nted performa nce for t he 87130A over th[...]
-
Página 40
3-2 Agilent 87130A Operating and Service Manual Specifications Performance Specif ications Performance Spe cifications T able 3-1 87130A Elec trical Sp ecificati ons 1. Refer to “ Compatible Switches and Attenua tors ” on page 1- 4 if you are usi ng switches or attenuators ma de by another c ompany . Electrical Specif ications Drive Capaci ty -[...]
-
Página 41
Agilent 87130A Operating and Service Manual 3-3 Specifications Performance Specificatio ns T able 3-2 87130A Envir onmental Spec ifications Environmental Speci fications T empe rature Operating 0 to + 55 ° C Non-operat ing − 40 to 70 ° C Humid ity Operating and Non-operat ing 80% relativ e humidity up to 31 ° C decreasing l inearly to 50% rela[...]
-
Página 42
3-4 Agilent 87130A Operating and Service Manual Specifications Performance Specif ications[...]
-
Página 43
Agilent 87130A Operating and Service Manual 4-1 4 Remote Operation Overview I n this cha pter you wi ll lear n about pro gramming the 87130A using a control ler: • How to set up t he switch drive r and start programming gr oups and pat hs for switche s • How to set switch del ay , pulse wi dth, and se nsing • How to sens e switch stat us • [...]
-
Página 44
4-2 Agilent 87130A Operating and Service Manual Remote Operation Progr ammi ng Pr ogramming Sta nda rd C omm a nds The instrumen t command lang uage is Standa rd Commands for Programmabl e Instru ments (SCPI) . The progr amming examples and infor mation in t his chapt er use the SCPI format. SCPI f ollows IEEE 4 88.2-1987 Code s, Formats, Prot ocol[...]
-
Página 45
Agilent 87130A Operating and Service Manual 4-3 Remote Operation Progra mming Syn tax Pr ogramming Syntax T alking to the Switch Driver In gener al, computer s acting as controll ers communic ate with t he switch driver by passin g messag es over a remote in terface using the I/O sta tements provided in the in struc tion set of the contr oller ’ [...]
-
Página 46
4-4 Agilent 87130A Operating and Service Manual Remote Operation Programm ing Syntax Addr essing the Swit ch Driver Since GPIB c an address multiple dev ices thr ough the sa me interf ace card, the devi ce selec tor passe d with the prog ram messa ge must include not only the corr ect int erface c ode, but al so the correc t instr ument addre ss. I[...]
-
Página 47
Agilent 87130A Operating and Service Manual 4-5 Remote Operation Progra mming Syn tax Commands A command is compose d of a head er , any a ssociated da ta, and a t erminator . The header is the mnemonic or mnemoni cs that repre sent the oper ation to be perfor med by the s witch driver . The diff erent t ypes of h eaders ar e discus sed in the f ol[...]
-
Página 48
4-6 Agilent 87130A Operating and Service Manual Remote Operation Programm ing Syntax Example *CLS is an example of a common command he ader . *CLS; ROUTE:DRIVE:ON (@100,102,104,106,....); Common commands use d by the swi tch driver a re explaine d in more det ail in the “ Common Command Referen ce ” later i n this ch apter . Program Header Opti[...]
-
Página 49
Agilent 87130A Operating and Service Manual 4-7 Remote Operation Progra mming Syn tax Character Program Data Characte r program data is used to convey par ameter infor mation as alph a or alphanumer ic stri ngs. Example ROUTE:VERIFY:ON:ALL The :VERIFY func tion is s pecifie d to be ON fo r ALL cha nne ls. Numeric Program Data Some command hea ders [...]
-
Página 50
4-8 Agilent 87130A Operating and Service Manual Remote Operation Programm ing Syntax Query commands are also used to get r esults of switch s tatus made by t he switc h d river, with the qu ery ac tua lly a ctiva ting the switc h. Example ROUTe:CLOSE? <channel spec> instru cts the dr iver to sense th e statu s of the s witch and pl ace the r [...]
-
Página 51
Agilent 87130A Operating and Service Manual 4-9 Remote Operation Programming th e Switch Driver Pr ogramming the Swi tch Driver Initi alizat ion T o make sure the bus and all appropri ate inte rfaces a re in a kno wn state, begin e ver y pr ogr am with a n i nit ializa tio n s tate men t. Example CLEAR 709 ! init iali zes the i nterf ace of th e dr[...]
-
Página 52
4-10 Agilent 87130A Operating and Service Manual Remote Operation Programming th e Switch Driver wher e GROU P1 represent s the name of th e desired gr oup. This would enter the current label of the group in the st ring vari able Set ting$. Example All r esults f or queries s ent in a p rogram messag e must be read b efore another program me ssage [...]
-
Página 53
Agilent 87130A Operating and Service Manual 4-11 Remote Operation Programming th e Switch Driver Stri ng V a riab les If you wan t to obser ve the header s for quer ies, you must bring the r eturned data in to a BASIC str ing variabl e. Reading qu eries in to string va riables is simp le a nd str aigh tforw ar d, r equir ing litt le at tentio n to [...]
-
Página 54
4-12 Agilent 87130A Operating and Service Manual Remote Operation Common Com mands Reference Common Commands Refer en ce The common commands us ed in this i nstrument a re shown in the fo llowing table . • The commo n commands con trol some of the b asic ins trument func tions, such as i nstrument identific ation and r eset and how st atus is rea[...]
-
Página 55
Agilent 87130A Operating and Service Manual 4-13 Remote Operation *CLS (Clear Status) *CLS (C lear Status) Synta x *CLS Description The *CLS (cl ear stat us) common command clears t he statu s data st ructures, includi ng the device defined e rror queu e. This command als o clears *OPC and *OPC?. If the *CLS command immed iately follows a PROGRAM M[...]
-
Página 56
4-14 Agilent 87130A Operating and Service Manual Remote Operation *ESE (Event Status Enable) *ESE (Event Status Enable) Synta x *ESE mask *ESE? Description The *ESE command sets the Standa rd Event St atus Enable Reg ister bi ts. This regist er contains a mask value for the b its to be ena bled in t he Standard Event Sta tus Register . A one in th [...]
-
Página 57
Agilent 87130A Operating and Service Manual 4-15 Remote Operation *ESR? (Event Status Regist er Query) *ESR? (Event S tatus Registe r Query) Synta x * ESR? Description The *ESR qu ery returns the conte nts of th e Standard Event Stat us Registe r . The tabl e shows each bit in th e Event Sta tus Regist er and th e bit weigh t. When you rea d the Ev[...]
-
Página 58
4-16 Agilent 87130A Operating and Service Manual Remote Operation *IDN (Identificat ion Number) *IDN (Ide ntification Number) Synta x * IDN? Description The *IDN qu ery allo ws the inst rument to identify itself . It retu rns a str ing such as: HEWLETT-PACKARD,87130A,US12345678,95071 3 Where 95071 3 is the firmware ve rsion numbe r and US 12345678 [...]
-
Página 59
Agilent 87130A Operating and Service Manual 4-17 Remote Operation *OPC (Ope ration Comple te) *OPC (O perat ion Com plete) Synta x *OPC *OPC? Description The *OPC and *OPC? commands are used to synchro nize remot e interface softwar e to inte rnal module events. • The *OPC (ope ration co mplete) co mmand will cause the instrument to set the opera[...]
-
Página 60
4-18 Agilent 87130A Operating and Service Manual Remote Operation *RST (Reset) *RST (R eset) Synta x *RST Description *RST is equi valent t o a power up c ondition for the swit ch hardware . All rel ays for which DRI VE is ON are s et to the position s determin ed by ROUTe:PFAil. For any rel ays no t in eith er th e ROUTe:PFAil:OPEN or ROUTe:PFAil:[...]
-
Página 61
Agilent 87130A Operating and Service Manual 4-19 Remote Operation *SRE (Request Enable) *SRE (R equest E nable) Synta x *SRE mask *SRE? Description The *SR E command sets the Service Request Enable Registe r bits. This wil l indicat e whether or not the device ha s at leas t one reas on for re questing servic e. A one in th e Service Request Enab l[...]
-
Página 62
4-20 Agilent 87130A Operating and Service Manual Remote Operation *STB (Statu s Byte) *STB (Sta tus Byt e) Synta x *STB? Description The *STB qu ery retu rns the cu rrent val ue of the instrument ’ s status byt e. Refer to the tabl e below for the de finitions of the bit s in the status by te. Example Query OUTPUT 709; “ *STB? ” ENTER 709;Val[...]
-
Página 63
Agilent 87130A Operating and Service Manual 4-21 Remote Operation *TST? (Te st) *TST? (T est) Synta x *TST? Description *TST? causes al l relays to cycle through bot h of thei r positions (first all the CLOSE paths a re set; the n all the OPEN paths), a nd then get placed in th e approp riate p ower up posi tions. Ref er to *RST (Reset) on pag e 4-[...]
-
Página 64
4-22 Agilent 87130A Operating and Service Manual Remote Operation *WAI *W AI Synta x *WAI Description The *WAI comman d ca use s the i nst rume nt to wa it for a ll pe nd ing G PIB operati ons to fi nish befo re pro cessing an y further co mmands. Example OUTPUT 709; “ *WAI ”[...]
-
Página 65
Agilent 87130A Operating and Service Manual 4-23 Remote Operation Hierarchy Hierar chy T able 4-6 Command T ree ROUTE :CLOSe :OPEN :PATH :DEFine :CATalog :LABel :VALue :DELete :ALL :GROUP :NAME :CATalog :ADD :REMove :DEFine? :LABel :AUTOselect :ON :OFF :DELete :DELete :ALL[...]
-
Página 66
4-24 Agilent 87130A Operating and Service Manual Remote Operation Hierarchy T able 6-6. Command T r ee (conti nued ) ROUTE :PFAil :CLOSe :OPEN :DELete :VERify :ON :OFF :ALL :DRIVe :ON :OFF :ALL :WIDth :DELay :SERialnumber[?] :MODelnumber[?] :EEROM :CYCles?[...]
-
Página 67
Agilent 87130A Operating and Service Manual 4-25 Remote Operation Hierarchy T able 6-6. Command T r ee (conti nued) NOTE A colon ( : ) must be u sed in front of the ROUTE , DIAGnostics , MEMory , etc. commands if that command is not the fi rst it em in a com mand string . (The colon is optio nal if the c ommand is t he firs t in the s tring.) MEMor[...]
-
Página 68
4-26 Agilent 87130A Operating and Service Manual Remote Operation SCPI C omm and Re fer ence SCPI Command Refer ence Channel List s The 87130A can co ntrol up to s even dif f erent e xternal driver ca rds, each o f which can drive up t o 31 dif ferent relays. The c ards are numbered fr om 1 to 8; the r elays on each card are numbered fr om 0 to 30.[...]
-
Página 69
Agilent 87130A Operating and Service Manual 4-27 Remote Operation :ADD :ADD Synta x ROUTE:GROUP:ADD <group name>,<path name > Description This command adds an exist ing path to t he end of an existing gr oup. The group name a nd path name must have bee n previously defined us ing GROUP:NAME and PATH:DEF. A path may be added to a group i[...]
-
Página 70
4-28 Agilent 87130A Operating and Service Manual Remote Operation :AUTOselect :AUTOselect Synta x ROUTe:GROUP:AUTOselect[?] < group name > Description This tur ns the cur rent Auto Select st ate for the group o n or of f. Example Command ROUTE:GROUP:AUTO:ON ATTEN; This turns the current Auto Select state for the group ATTEN on. ROUTE:GROUP:AU[...]
-
Página 71
Agilent 87130A Operating and Service Manual 4-29 Remote Operation :CAT al og? :CA T alog? Synta x ROUTe :CATALOG? Description Returns a list of groups (u p to 16) or all defined paths in t he module. Example Query ROUTE:GROUP:CATALOG? This quer y returns a list of a ll of th e group names , in order from 1 to 16, separat ed by commas. ROUTE:PATH:CA[...]
-
Página 72
4-30 Agilent 87130A Operating and Service Manual Remote Operation :CLOSe :CLOSe Synta x ROUTe:CLOSe ROUTe:PFail:CLOSe[?] Description Each chann el has a CLOSE o r OPEN position. On Agilent r elays, the CLOSE path is the pa th between the input terminal labeled 2 on the rel ay and the input terminal labele d C. It is rec ognized that CLOSE a nd OPEN[...]
-
Página 73
Agilent 87130A Operating and Service Manual 4-31 Remote Operation :CLOSe Example Command ROUTE:CLOSE ATTEN_14; Sending t he above comman d causes the s et of swit ch OPENs and CLOSEs defined by the PATH (r efer to :P A TH on page 4-55 ) with name ATTEN_14 to be execut ed. The fir st group of s witch set tings in the PATH is in terpr ete d as CLOSE [...]
-
Página 74
4-32 Agilent 87130A Operating and Service Manual Remote Operation :CLOSe Example Query ROUTE:PFAIL:CLOSE? (@1 01,205); The incl usion of a question ma rk causes a readback of the power up state of the requ ested cha nnels as a li st of 1 ’ s and 0 ’ s separated by co mmas. A 1 mean s the chan nel is in t he PFA:CLOS list. A 0 means tha t it is [...]
-
Página 75
Agilent 87130A Operating and Service Manual 4-33 Remote Operation :CYCLes? :CYCLes? Synta x DIAGnostics:EERom:CYCLes? Description This query ca uses the 87130A to rea d back the number of ti mes to which the EEROM has been wr itten. If t his number e xceeds 10,000 t he EEROM should be replaced . If the EEROM ha s never been wri tten to , then 0 is [...]
-
Página 76
4-34 Agilent 87130A Operating and Service Manual Remote Operation :DEFine :DEFine Synta x ROUTe:PATH:DEFine <path name>,<channel list> [,<channel list>] ROUTe:GROUP:DEFine? <group name> ROUTe:PATH:DEFine? <path name> Description Under the PATH subsys tem, this command is use d to defin e or redefin e the switch s ettin[...]
-
Página 77
Agilent 87130A Operating and Service Manual 4-35 Remote Operation :DEFine Example Command ROUTE:PATH:DEF ATTEN_14,(@101,2(0:5)),( @102); This command defines a pat h whose name i s ATTEN_14 whose first channel list a ffe cts channe l 1 on card 1 a nd channels 0 through 5 on card 2, a nd whose seco nd chann el list affect s channel 2 on card 1 . Exa[...]
-
Página 78
4-36 Agilent 87130A Operating and Service Manual Remote Operation :DELay :DELay Synta x ROUTe:DELay:<delay time>, Description This comman ds sets the d elay time in sec onds require d to val idate t he sense lines on a relay f or which sen sing will be used. The d rive sign al will be held on th e relay f or this a mount of ti me afte r the p[...]
-
Página 79
Agilent 87130A Operating and Service Manual 4-37 Remote Operation :DEL ay NOTE The query fo rm is not av ailable when usi ng a path name due to the potent ial for conf usion bet ween the first g roup and th e second in the pa th.[...]
-
Página 80
4-38 Agilent 87130A Operating and Service Manual Remote Operation :DELete :DELete Synta x ROUTE : DELete Description This command delet es: • All data associat ed with the specifie d path or group a nd frees up the path stor age r egis ter. • All ch an nels from the PFAIL list . This command sets memory t o an init ial sta te. NOTE The :DELete [...]
-
Página 81
Agilent 87130A Operating and Service Manual 4-39 Remote Operation :DELete • MEMory:DELete; MEMory:DELete erase s all d ata fr om CM OS R AM, by f illin g it with ze roe s, and th en sets it to an ini ti al st ate. T hat sta te is as fo llo ws: ❍ The p ower fail cha nne l lis ts ar e em pt y ( ROUT:PFA:CLOS and ROUT:PFA:OPEN ). ❍ Sensing (VER [...]
-
Página 82
4-40 Agilent 87130A Operating and Service Manual Remote Operation :DRIVe :DRIV e Synta x ROUTe:DRIVe : ALL ROUTe:DRIVe [?]<channel list> ROUTe:DRIVe : <pathname> Description There is a list of r elays con sidered un used or “ not t here ” by the f irmware. Unused chann els are not driven even i f included in a channel l ist or path [...]
-
Página 83
Agilent 87130A Operating and Service Manual 4-41 Remote Operation :DRIVe Example Query • ROUTE:DRIVE:ON? (@101,103,105); This comman d returns a l ist of 1 ’ s and 0 ’ s, separated by commas, depending on whether drive is on or of f for the indic ated chan nels. If it is on for c hannels 10 1 and 105 and off for 103, th e switch dr iver wil l[...]
-
Página 84
4-42 Agilent 87130A Operating and Service Manual Remote Operation :EERom :EERom Synta x DIAGnostics:EERom:CYCLes? Description This func tion allows EERom informati on to be read out. (Refer to :CYCLes? on p age 4-33 .)[...]
-
Página 85
Agilent 87130A Operating and Service Manual 4-43 Remote Operation :ERRor? :ERRor? Synta x SYSTem:ERRor? Description As SC PI sp eci fies , th is r eads o ut th e fu ll er ror numb er a nd e rror d esc ript ion for the first e rror in t he error queue. It can be iss ued repeat edly un til the queue is empty (indi cated by 0 ,”No error” ). All po[...]
-
Página 86
4-44 Agilent 87130A Operating and Service Manual Remote Operation :ERRor? -181,Invalid outside macro definition -183,Invalid inside macro definition Execu tio n Errors These set the Exec Err bit in ESR. -200,Execution error -222,Data out of range -223,Too much data -270,Macro error -272,Macro execution error -273,Illegal macro label -276,Macro recu[...]
-
Página 87
Agilent 87130A Operating and Service Manual 4-45 Remote Operation :ERRor? 1004,EEROM data invalid Corrupti on has been detected in the EEROM; i t needs to be replaced, or , if brand new , it nee ds to have ME M:SAVE executed once. 1006,Channel timeout <17 hex digits> This erro r is g ener ated wh en a re lay app arent ly f ails to sw itc h, b[...]
-
Página 88
4-46 Agilent 87130A Operating and Service Manual Remote Operation :FREE? :FREE? Synta x MEMory:Free? Description This is a query which retu rns the nu mber of b ytes that remain in RAM for storin g configur ation dat a, followed by the numbe r of bytes in itiall y availa ble. The two q uantiti es are separ ated by commas . For a brand new system th[...]
-
Página 89
Agilent 87130A Operating and Service Manual 4-47 Remote Operation :GROUP :GROUP Synta x ROUTE: GROUP: Description The GROUP subsy stem allo ws grouping o f paths t o customize the manual interf ace to th e 87130A. A “ group ” is an ordere d collection of up to 256 pa ths. Pat hs can be colle cted into mean ingful gr oups using the GROUP command[...]
-
Página 90
4-48 Agilent 87130A Operating and Service Manual Remote Operation :INITialize :INITialize Synta x MEMory:INITialize Description When t his co mm and is issu ed , RA M is ini tial ized acco rding to t he fol lowin g algori thm: 1. RAM is in itialized to the state de scribed i n MEMory:DELete . This command esse ntially erases a ny changes t hat have[...]
-
Página 91
Agilent 87130A Operating and Service Manual 4-49 Remote Operation :LAB el [?] :LABel[?] Synta x ROUTe :LABEL “ <label> ” ; Description This command specifie s a label (32 chara cters max) to be used when labeli ng the grou p on manual i nterfac e screens . Any charact er may be us ed within t he quotes as long as its value is between 32 a[...]
-
Página 92
4-50 Agilent 87130A Operating and Service Manual Remote Operation MEMory MEMory Synta x MEMory Description The MEMory subs ystem is us ed to delete , initia lize RAM, and sa ve EEROM info rmation t o the co ntrolle r . :DELete :INITialize :SAVE : FREE? [...]
-
Página 93
Agilent 87130A Operating and Service Manual 4-51 Remote Operation :NAME :NAME Synta x ROUTE:GROUP:NAME <number>,<group name> Description The groups are numbere d from 1 to 16. The y may be named or renamed using th is command. An at tempt to n ame a group us ing a name al ready in use for another gr oup will r esult in an error . A grou[...]
-
Página 94
4-52 Agilent 87130A Operating and Service Manual Remote Operation :OPEN :OPEN Synta x ROUTe:OPEN[?] ROUTe:PFail:OPEN[?] Description Each cha nnel has a CLOSE or OPEN p osition. On Agilent r elays, the OPEN path i s th e pa th be twee n th e in put te rmi nal labe led 1 on th e re lay and th e input t erminal label ed C. It is r ecognized that CLOSE[...]
-
Página 95
Agilent 87130A Operating and Service Manual 4-53 Remote Operation :OPE N It is possi ble to combine OPEN and CLOSE in a singl e command si nce they are both par t of the ROUTe subsys tem. For exampl e: ROUTE:CLOSE (@406:410);OPEN (@202); This command will clos e channels 6 through 1 0 on card 4 a nd open channel 2 on card 2. Example Command ROUTE:O[...]
-
Página 96
4-54 Agilent 87130A Operating and Service Manual Remote Operation :OPEN Example Query ROUTE:PFAil:OPEN? (@10 1,205) ; The incl usion of a question ma rk causes a readback of the power up state of the requ ested cha nnels as a li st of 1s a nd 0s separ ated by commas . ❍ A 1 means the channel i s in the P F A:OPEN list . ❍ A 0 means tha t it is [...]
-
Página 97
Agilent 87130A Operating and Service Manual 4-55 Remote Operation :PATH :P A TH Synta x ROUTe:PATH Description The PATH subsys tem a llo ws s tori ng of cha nnel l ists to si mp lify re mo te access a nd to cust omize the man ual inte rface to the 8713 0A. • Paths ar e specif ied using CLOSE and OPEN channel lists. Each relay contain s one CLOSE [...]
-
Página 98
4-56 Agilent 87130A Operating and Service Manual Remote Operation :PFAil :PF Ail Synta x ROUTe:PFAil Description The ROUT e:PF Ail subsyste m of SCPI all ows specif ication of wh ich channels will be c losed on a p ower cycle (or *RST or *TST?) . • Channels not specifi ed by ROUTE:PF AIL:CLOSE or ROUTE:PF AIL:OPEN are set duri ng power up by read[...]
-
Página 99
Agilent 87130A Operating and Service Manual 4-57 Remote Operation :REM ove :REMove Synta x ROUTe:GROUP:REMove <group name>,<path n ame> Description This comman d removes all i nstances of the specifi ed path from a gro up. The group name a nd path name must have bee n previously defined us ing GROUP:NAME and PATH:DEF. Example Command RO[...]
-
Página 100
4-58 Agilent 87130A Operating and Service Manual Remote Operation ROUTe ROUT e Synta x Refe r to t he com man d tre e. Description Relay swi tching and configura tion is acc omplished by the ROUTe comm and tree.[...]
-
Página 101
Agilent 87130A Operating and Service Manual 4-59 Remote Operation :SAVE :SA VE Synta x MEMory:SAVE Description This command copies the RAM i mage to the EEROM. Care shoul d be taken to do th is onl y wh en nec essa ry , du e to the lim ited lif e of t he EER OM. (Refe r to DIAG:EEROM:CYCLES? ). Becaus e this is t ime consuming ( over a minute in so[...]
-
Página 102
4-60 Agilent 87130A Operating and Service Manual Remote Operation STATus ST A T us Synta x STATus:OPERation STATus:QUEStionable Description The ST A T us subs ystem is full y specif ied by SCPI. Re fer to th e following comm and s: *STB (Status Byte) , *SRE (Request Enabl e) , *ESE (Event Status Enable) , and *ESR? (Even t Status Register Query) ?[...]
-
Página 103
Agilent 87130A Operating and Service Manual 4-61 Remote Operation SYST em SYST em Synta x SYSTEM Description These ar e SYST em commands from the SCPI specific ation. • VERSion? • ERRor? :VERSion? :ERRor ? [...]
-
Página 104
4-62 Agilent 87130A Operating and Service Manual Remote Operation TRIGger TRIGger Synta x TRIGger:SEQuence:DELay <number> Description This command allows the user to cont rol the 24 V power suppl y recovery time. Inp ut values are limit ed to bet ween 0 and 200 msec (200 msec is the default setting) . The GPIB c ommand TRIGger:SEQuence:DELay [...]
-
Página 105
Agilent 87130A Operating and Service Manual 4-63 Remote Operation :VALue :V ALue Synta x ROUTe:PATH:VALUE <path name>,<number>; Description This comman d specif ies a numbe r (int eger in the range – 32768 to 32767) to be used whe n labeli ng the path on manual in terface screens. T his number , when enter ed manua lly from t he user [...]
-
Página 106
4-64 Agilent 87130A Operating and Service Manual Remote Operation :VERify :VERify Synta x ROUTe:VERify ROUTe:VERify [?] Description This command a dds or remove s relays f rom the “ sen se list ” , th e list of relays for wh ich sensi ng is enab led. This command only works with relays tha t have the abili ty to sense the state of the swi tch .[...]
-
Página 107
Agilent 87130A Operating and Service Manual 4-65 Remote Operation :VERify ROUTE:VERIFY:ON ATTEN_14; This comm an d cau ses t he s et o f swit che s de fined by th e P A TH wi th th e pathname ATTEN_14 to be added to (ON) or removed from (OFF) the "sense list . All swi tche s refe ren ced in ei the r chan nel list in th e pa th ar e add ed (O N[...]
-
Página 108
4-66 Agilent 87130A Operating and Service Manual Remote Operation :VERsion ? :VERsion? Synta x SYSTem:VERSion? Description This rea ds out the firmwar e datecod e.[...]
-
Página 109
Agilent 87130A Operating and Service Manual 4-67 Remote Operation :WIDTh :WIDTh Synta x ROUTe:WIDTh <pulse width> , ROUTe:WIDTh <channel list> Description This command sets the pulse width in sec onds required to cl ose a relay . The pulse wid th may be set in 5 ms inc rements up t o 1275 ms. The p ulse width default s to 30 ms when mem[...]
-
Página 110
4-68 Agilent 87130A Operating and Service Manual Remote Operation Example Prog rams Example Pr ograms The foll owing progr ams writte n in Rocky Mount ain Basic pro vide sa mple programs t hat may be hel pful in progr amming the 871 30A. Save Memory In order to use th e followi ng program, you must first cre ate a fi le named SWDATA . The foll owin[...]
-
Página 111
Agilent 87130A Operating and Service Manual 4-69 Remote Operation Example Programs 280 ENTER @Sw;A$ 290 I=-1 300 WHILE LEN(A$)>0 310 Comma=POS(A$, ” , ” ) 320 IF Comma=0 THEN 330 A$=A$& ” , ” 340 Comma=LEN(A$) 350 END IF 360 I=I+1 370 Groupnames$(I)=A$[1;Comma-1] 380 A$=A$[Comma+1] 390 END WHILE 400 OUTPUT @File;Groupnames$(*) 410 Ma[...]
-
Página 112
4-70 Agilent 87130A Operating and Service Manual Remote Operation Example Prog rams 670 WHILE LEN(A$)>0 680 Comma=POS(A$, ” , ” ) 690 IF Comma=0 THEN 700 A$=A$& ” , ” 710 Comma=LEN(A$) 720 END IF 730 I=I+1 740 Pathnames$(I)=A$[1;Comma-1] 750 A$=A$[Comma+1] 760 END WHILE 770 OUTPUT @File;Pathnames$(*) 780 Max_path=I 790 FOR P=0 TO Max[...]
-
Página 113
Agilent 87130A Operating and Service Manual 4-71 Remote Operation Example Programs Resto r e Mem ory The foll owing progr am can be use d to rest ore the EEROM st ate read o ut by READMEM: 10 ! WRITEMEM program. Takes a file written by READMEM and sends it to the 87130A. 20 DIM A$[32767] 30 DIM Respond(31),Sense(7,31),Unused(7,31),Pfac(7,3 1), Pfao[...]
-
Página 114
4-72 Agilent 87130A Operating and Service Manual Remote Operation Example Prog rams 330 ENTER @File;Pathnames$(*) 340 FOR I=0 TO 255 ! send path dat a 350 IF Pathnames$(I)<> ”” THEN 360 ENTER @File;A$ 370 OUTPUT@Sw; ” ROUT:PATH:DEF ” &Pathna mes$(I)& ” , ” &A$& ” ; ” 380 END IF 390 NEXT I 400 FOR I=0 TO 15 ! se[...]
-
Página 115
Agilent 87130A Operating and Service Manual 4-73 Remote Operation Example Programs 650 END 660 SUB Getandsend_bmap(B$) 670 ! Loads a query response from file and outputs it as a channel list 680 COM @File,@Sw 690 DIM Bitmap(7,31),A$[32767] 700 ENTER @File;Bitmap(*) 710 FOR I=0 TO 7 720 A$= ”” 730 FOR J=0 TO 31 740 IF Bitmap(I,J) THEN A$=A$&[...]
-
Página 116
4-74 Agilent 87130A Operating and Service Manual Remote Operation Example Speed Calculation Example Speed Calculation Switchin g speed is a functi on of puls e widths, s ensing del ays, the s tate of the chosen c hannels, the seque nce of r elays dr iven and the power suply re covery time. A sampl e program a nd timing diagr am are provide d to hel[...]
-
Página 117
Agilent 87130A Operating and Service Manual 4-75 Remote Operation Example Speed Calculation 60 ! a range. 70 OUTPUT 709; ” ROUT:DRIV:OFF (@112:130) ; ” 80 ! 90 ! Drive is set to OFF for remaining channels on driver 100 ! card 1.Unless channels are part of Drive list , no 110 ! pulse (:WIDTh) is sent. 120 OUTPUT 709; ” ROUT:VER:ON (@100:111); [...]
-
Página 118
4-76 Agilent 87130A Operating and Service Manual Remote Operation Example Speed Calculation 380 OUTPUT 709; ” ROUT:WIDT .04,(@100,10 2,104,108); ” 390 ! 400 ! Pulse (:WIDTh) is set to 40 ms for channels 100,102, 410 ! 104, and 108. When :OPEN is sent, 100 and 10 2 420 ! will OPEN at the same time. 430 ! Channels 104 and 108 will e ach OPEN at d[...]
-
Página 119
Agilent 87130A Operating and Service Manual 4-77 Remote Operation Example Speed Calculation 780 ! See timing chart to predict when each relay will 790 ! open. 800 OUTPUT 709; ” ROUT:OPEN? (@100:104,10 8:111); ” 810 ! 820 ! You turned sensing off for 1 04 thru 107, remember? 830 ! About OPEN?: you could still query for the entire 840 ! open list[...]
-
Página 120
4-78 Agilent 87130A Operating and Service Manual Remote Operation Example Speed Calculation[...]
-
Página 121
Agilent 87130A Operating and Service Manual 5-1 5 Replaceable Par ts Overview I n this cha pter you wi ll find: • Accessor ies avail able for the swit ch driver by part numbe r and descri ption. • All repl aceable parts re ferenced i n chassi s and cable assemblie s.[...]
-
Página 122
5-2 Agilent 87130A Operating and Service Manual Replaceable Parts This page int enti onally l eft blank[...]
-
Página 123
Agilent 87130A Operating and Service Manual 5-3 Replaceable Parts Accessory Boards and Cables Addition al driver boards, i nterconne ct boards, and cable s provide expanded capacit y , remote swit ching and ev erything needed for dev ice connec tion. Fi rmwa r e Re vis ions Ol der v ersi ons of th is inst rum en t may h ave firmw ar e par t num ber[...]
-
Página 124
5-4 Agilent 87130A Operating and Service Manual Replaceable Parts T able 5-2 Replaceab le Parts - 87130A Chassi s Assembly ( 1) Part Location Part Number Quantity Descriptio n Reference Designator 1 87130-00009 1 D eck — 2 87130-0 001 1 1 Power supply shield — 3 87130-6 2065 1 Driver boar d A2 4 87130-0 0010 1 PC board bracket ass embly — 5 8[...]
-
Página 125
Agilent 87130A Operating and Service Manual 5-5 Replaceable Parts Figure 5-1 87130A Chassi s Assembly ( 1)[...]
-
Página 126
5-6 Agilent 87130A Operating and Service Manual Replaceable Parts T able 5-3 Replaceab le Parts - 87130A Chassi s Assembly ( 2) Part Location Part Number Quantity Description 1 5021-8401 1 Front fr ame 2 5021-58 02 1 Rear frame 3 5021-58 87 2 S ide strut 4 5041-88 02 1 T op trim 5 5063-92 26 1 Front ha ndle kit 6 5021-8495 2 Trim, front handle 7 50[...]
-
Página 127
Agilent 87130A Operating and Service Manual 5-7 Replaceable Parts Figure 5-2 87130A Chassi s Assembly ( 2)[...]
-
Página 128
5-8 Agilent 87130A Operating and Service Manual Replaceable Parts 1 Required fo r 220V options T able 5-4 Replac eable Part s - 87130A Cable As sembly Part Location Part N umber Quantity Description Reference D esignator 1 87130-6206 5 1 Dr iver board A2 2 87130-6000 2 1 Cont roller boa rd A1 3 0950-2252 1 Power supply 1 10 W A3 4 87130-6000 1 1 Di[...]
-
Página 129
Agilent 87130A Operating and Service Manual 5-9 Replaceable Parts Figure 5-3 87130A Cable Assembly[...]
-
Página 130
5-10 Agilent 87130A Operating and Service Manual Replaceable Parts[...]
-
Página 131
Agilent 87130A Operating and Service Manual 6-1 6 T r oubleshooting Overview I n this cha pter you wi ll find: • How to check the fuses and power s upply • How to set up the EPROM af ter rep lacement[...]
-
Página 132
6-2 Agilent 87130A Operating and Service Manual Troubleshooting Troubleshoo ting T roubleshooting If your instrument is still in warrant y we stron gly recommend that you s end the en tire unit b ack to Ag ile nt T ec hnolo gie s for r epa ir . A procedur e for che cking the fu ses and p ower supply is given on page 6-4 . W ARNING • T o avoid ele[...]
-
Página 133
Agilent 87130A Operating and Service Manual 6-3 Troubleshooting Troubleshoot ing Figure 6-1 87130A DC Schemat ic[...]
-
Página 134
6-4 Agilent 87130A Operating and Service Manual Troubleshooting Fuse and Power Supp ly Check Fuse and Power Supply Check Fuse Check If the attenuat or/switc h driver f ails to respond whe n the power s witch is turned on, t he power line fuse should be check ed. The 1 A, 250 V time delay , power li ne fuse (p art numb er 21 10-0 782) is lo cated in[...]
-
Página 135
Agilent 87130A Operating and Service Manual 6-5 Troubleshooting Procedure f or Setting Up the EPROM Pr ocedure for Setting Up the EPROM Use the f ollowing pr ocedure to s et up the EPROM af ter the EPROM or the CPU board has been repl aced. • T o set up the EPROM fr om the cont roller , use the fol lowing commands: "MEM:DEL; Delete s ev eryt[...]
-
Página 136
6-6 Agilent 87130A Operating and Service Manual Troubleshooting Procedure for S etting Up the EPROM[...]
-
Página 137
Index Agilent 87130A Operating and Service Manual Index-1 A accessorie s, description, 5-13 ADD, 4-27 address channel , 2-4 dri ver ca rd, 2-11 factory preset , 2-3 GPIB, 2-3 switch dr iver, 4 -4 AUTOselect, 4-28 B block di agram , 1-2 boards, acc essory, 5-13 C cable I/O data, 2-13 outp ut, 2- 14 cables, a ccessory, 5-13 CA T alo g, 4- 29 channel [...]
-
Página 138
Index-2 Agilent 87130A Operating and Service Manual comp ound , 4-5 optio ns, 4-6 I I/O data cable descri ption , 2-13 pin fu nction s, 2-13 IDN, 4-16 If, 6-2 initiali zation, 4-9 INIT ialize, 4-48 inspectio n, 2-2 installatio n, 2-1 instrument status, 4-11 interface seIect co de, 4 -4 L LABel, 4-49 M MEMory, 4-50 multip le driver ca rds, conne cti[...]
-
Página 139
Agilent 87130A Operating and Service Manual Index-3 SA VE, 4-5 9 ST A Tus, 4-6 0 SYST em, 4 -61 TRIGger, 4-62 VA L u e , 4 - 6 3 VERify, 4-64 VERsion , 4-66 WID Th, 4-67 selecting m ultiple subs ystems, 4-5 sensing delay, 1 -3 serial number, 4-48 setting up the switch driver, 4-9 specifications enviro nmental, 3 -3 SRE, 4 -19 ST A Tus, 4-6 0 status[...]
-
Página 140
Index-4 Agilent 87130A Operating and Service Manual[...]