AirLive P-201 manual

P-201/ P-201U Wired Printer Server User’s Manual[...]

COPYRIGHT Copyright © 2006/2007 by this company. All rights reserv ed. No part of this publication may be reproduced, transmitted, transcr ibed, stored in a retrieval system, or translated into any language or computer l anguage, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prio[...]

CONTENTS 1. INTRODUCTION 1. 1 PRODUCT INTRODUCTION ................................................................ 1 1.2 Product Package ....................................................................................................... 2 1.3 Network Printing Architecture ........................................................................[...]

7.5 General Configuration ............................................................................................. 49 7.6 TCP/IP Configuration .............................................................................................. 50 7.7 Netware Print Server Configuration .................................................................[...]

10.2.1 Print Server Side ............................................................................................... 91 10.2.2 Client Side ......................................................................................................... 91 11. LPR SETTING IN MAC OS ........................................................................[...]

1. Introduction 1.1 Product Introduction Thank you for purchasing and using our pr in t server. T his print server allows your p rinter to b ecome a shared de vice on th e ne twork. It offers printing flexibility and manage ability on your Local Area Network at an extremely low cost and w ith an absolu te minim u m setup and mainte nance required. [...]

1.2 Product Package This package contains th e following components: One Print Ser ver One Power Adapter One Quick Installation Guide One CD-ROM (Including all the softwa re utilities, dr ivers and User’s Manual) 2[...]

1.3 Network Printing Architecture This section illustrates how print server functions and operates on the network. Before you instal l and use print server, it is strongly recommended that you r ead this s ection c omplete ly, and se lect only the chap ters you need according to your networ k operating system by “C ontents of the Us er’s Manual[...]

Because print server s upports IPX/SPX, NetBEUI, TCP/IP and AppleTalk network prot ocols, any ne tworked co mputer c an direc tly prin t to the p rint server from any of it s installed protocol. 1.3.2 Network Prin ting Functions for Clients Windows NT Serve r NetWare Server Windows 98 Wind ows NT Workstation Windows 2000 Unix Print Serve r Client U[...]

In the client inst allation procedure , after PTPP (Peer-to-Peer Pri nting Driver) is installe d into Windows, the system will automatically (manual configuration is also allowed) searc h all the print servers on the network, a nd then add their p rinting por ts into Windows’ printing port (see below ). W indow s 98 PTPP Print Ser ver MIS-2 P1 P2[...]

UNIX (include HP/UX, SCO Unix, SunO S, Solaris, Unixware DECUnix, IBM AIX and ot hers) and Linux use the system-standar d LPR to print through print serv er. MAC OS MAC OS can use the syst em-standard AppleTalk ne twork to print through print serv er. 1.3.3 Network Printing Functions for Network Server Windows NT Serve r NetWare Server Windows 98 W[...]

1.4 Network Printing Environment Common network envir onmen t are classified as following : Windows Peer-to-Peer Network The client’s PTPP driver will use TCP/ IP protocol to pr int throug h print server. Windows NT/2000/ 2003 Network Network printing function will be come ava ilable afte r PTPP drive r is installed into Windows NT /2000/2003. Ad[...]

NetWare Networ k (see below ) 8[...]

1.5 Contents of the User’s Manual Chapter 2 explains pri nt server’s hard ware installation and configuration. It is st rongly recomme nded for you to read. The following chapter s introduce: Chapter 3. Windows Peer-to-Peer Network Chapter 4. Windows NT/2000/2003 Server -B ased Networks Chapter 5. NetWare Network Chapter 6. UNIX System Network [...]

Chapter 13 In Windows XP SP2, you may not find any print server liste d on the “Available Ports ” in “Network Ports Quick Setup”. Please follow the instructio n in this chap te r and resolve the problem. 10[...]

1.6 Firmware & Printing Function The print server provides a complete netw ork pr inting solution. The feature set is listed below: PTPP (Peer-to-Peer-Printing) TCP/IP (LPR) IPP Printing NetWare Bindery Printing AppleTalk SMB Printing 11[...]

2. Hardware Inst allation 1. Unpack the print server package and verify that all the items listed in the section 1.2 are provided. 2. Connect th e print se rver to th e printer you want to sh are on the n etwork. 3. Connect the pr int ser ver to your ne twork by attach ed the ne twork cable to the UTP port of the print server. 4. Connect th e power[...]

3. Windows Peer-to-Peer Network 3.1 System Architecture Print server s upports Wi ndows Peer-to-Peer netw ork printing m ode, which is suitab le for mo st me dium and small network en vironm ents. Through quick and simple in stallation pr ocedure, u sers can imm ediat ely enjoy the convenience of network printing. 13[...]

3.2 Install Print Server driver and utility The Print Server windows utility can be per formed on Windows 95/98SE/Me/NT/2000/XP/2003 with the same us er interfac e. Before the installation, please verify that your ne twork protocol is in stalled on your PC (TCP/IP, IPX and/or NetBEUI). It will be helpful in your in stallation process. 1.Insert the [...]

3.The “Print Server Ut ilities” window will be displayed. Click “Next”. 4.Click “Next” to instal l the utilities in the de fault folder or click “Change” to specify the de stination folder where you would like to install the utilities. 15[...]

5.The system will start to in stall the utilitie s automatically. 6. The Print Server windows utilities Installation procedure is totally completed. and All netw ork ports of the Print Server s detected on the network will be added to your PC automatically, clic k “Continue” 6.The Print Server wind ows utilities Installation procedure is totall[...]

17[...]

3.3 Print Server Utilities After Print Server Utilities is completed, there will be four utilities in print serv er’s Program folder. Network Ports Qu ick Setup – Add the network port s of prin t servers within the network to your PC. Print Server Configuration – Allows you to configure the pr int server’s IP Address, ne twork protocols and[...]

3.3.1 Network Ports Quick Setup Network Ports Quick Set up Utility offers a very si mple method to add or remove pr int serve r’s prin ter po rt f r om the client’s com puter. During the client’s instal lation procedure, the syst em will automatically search for all print se rvers on the netw ork, and add them into the printer ports of the cl[...]

Please be aware that Network Ports Quick Setup Utility can only detect and configure all print se rvers on the sam e networ k, it cannot search and configure pr int server s on other subnets across ne twork segm ents. You must use Remote Ports Ut ility described in the next section to ma nage remote (across network segmen ts) pr int servers . Selec[...]

Step2. Enter print serv er’s name, IP address, sele ct used ports, an d enter LPR queue nam e of ea ch port. Click “Ok”. Step3. The new re mote pr int port is d isplayed a s follows. In order to use the remote printing function, you will have to proceed with normal Add Printer procedure and select your printer port as the newly added remote p[...]

22[...]

3.4 Windows Add Printer Procedure After adding a “Network P ort” of the print se rver to your PC by Administrator or Client Installation Program, you can follow the procedure described below to add printer to the Windows. Note that following “Add Printer” steps are running in Windows XP, the steps in other Operating Systems are similar. Ste[...]

Step5. Choose the suitable “Print Se rver Network Port” which was created by the Administrator Insta llati on or Client Installation process and click “Next”. S t e p 6 . S e l e c t a s u i t a b le printer manufa cturer and the printer model and click “Next”. If your printe r is not in the list, click “Have D isk…” to install th[...]

Step7. Name your prin ter and setup the default pr inter, click “Nex t”. Step8. Choose to print the test page or not. It is recomm ended to prin t a test page. Cl ick “Next”. 25[...]

Step9. You have added the prin ter to the PC successfully . The informatio n of the pr inter is d isplayed in the win dows. Click “Finish”. 26[...]

4. Windows NT/2000/2003 Network 27[...]

4.1 System Architecture In Windows network environment , ot her than th e Peer -to-Peer network printing architecture described in t he previous ch apter, we also offer the Server-Based Printing architecture for Windows NT/2000/ 2003 server. Only one Windows NT/2000/2003 is required to have Wi ndows PTPP (Peer-to-Peer Printing) driv er installed an[...]

4.2 Windows NT/2000/200 3 Server Installation and Setup Please follow the procedur es described below for instal lation and constr uct a peer-to-peer c onnection (PTPP) betw een Windows NT/2000 /2003 Server and Print Ser ver. Step1. If this is your first ti me installing prin t se rver, please install the administrator software on Windows NT/2000 /[...]

4.3 User Installation and Setup After server sid e’s installatio n is comple ted, client side will be able to find the server’s shared printe r in Network Nei ghborhood. You only need to perform Window’s standard Add New Printer procedure, select “Network Printer” shown in the screen below, and complete the config urations afterwards to a[...]

5. NetW are Network 31[...]

5.1 System Architecture We imple mented N etWare printer sh aring fun ctionality into the pr int server itself , thus allowing o ne or more pr inters attached by a p rint server to be connected to the network. We have develo ped the print server to support NetWare pr int serv er. Embedded print server , which emulates the “q ueue management funct[...]

Each print s erver should log into a NetWare server befo re servicing the print jobs. Each print serv er will occupy a user accoun t with which it can lo g into the NetW are server. 33[...]

5.2 NetWare 3.x/4.x/5.x Installation & Setup Once your print server is connect ed to your Ethern et network, you can set it up for use with your networking software. 5.2.1 Installation Using PCONSOLE 5.2.1.1 Configur ing as Print Server Mode 1. Run the NetWar e PCONSOLE program . 2. Change th e current fi le server, if necessary, using the Chan[...]

8. Press the Insert key to add a new NetWare print server object. The print server name ca n be identical to th e PSxxxxxx name printed on the label of the prin t server. 9. Press Enter to select the newly created print server. 10. Select Print Se rver Configuration. 11. Select Printer Configuration. 12. Select Printer 0 (or Printer 1, Prin ter 2),[...]

14. Select Queues Servic ed by Printer, then select Printer 0 (o r Pr inter 1, Printer 2) and pr ess Enter. 15. Press Insert and add your newly created pr int queue to the list of queues serviced by the printe r. Ente r a prior ity numb er for the queue service, or press Enter t o accept the default. 16. Repeatedly pre ss Escape to exit th e PCONSO[...]

6. UNIX System Network 37[...]

6.1 Introduction The print server is available for TCP/IP printing by Unix LPD (Line Printer Dae mon) protocol. The LPD protoc ol originated with Uni x release is based on the BSD version of Unix and support ed under most ve rsions of Unix. This chapter explains how to configure the pr int server for TCP/IP operation, and how to modify configuratio[...]

6.2 Enable Print Server’s TCP/IP Support The default configuration of the prin t server is with TCP/IP s upport enabled. Anyway, you can c onfigure the print server to enable TCP/IP support using the configura tion program. 39[...]

6.3 Setup Print Server’s IP Address The print server must have a unique IP addr ess in order to be recognized by the network. You can set up the IP ad dress on the various Unix system s using any one of the following methods: 1. DHCP (Dynamic Host Configuration Protocol) 2. BOOTP (Bootstrap Protocol) The print serv er will use the las t th ree me[...]

203.66.191.12 pserver 2. Add an entry to the hos t’s /etc/bootptab fi le, sim ilar to the fo llowing: hostname: :ht=1: :ha=print_server_ether net_address: :ip=print_server_ip_address: Lines should be i ndented with tabs. Where hos tname is the d evice name of a print server, the h t=1 tag specifies the hardw are type is Eth e rnet, the ha= t a[...]

6.4 Verify Print Server’s IP Address To verify that your prin t server is responding to the newly assigned IP address usi ng a PING command: ping ip-address 42[...]

6.5 Configure Remote LPD Printing on the Host The procedure you use to configure your Uni x host(s) to allo w printing to your network remote print se rver varies between differe nt varieties of Unix. The procedure below can be used for Un ix va riants that are re lated to BSD Unix, such as SunOS or Linux. For ot her versions of Un ix, consult your[...]

:rm=203.66.191.186: :rp=lpt1: :lf=/var/spool/lpd/pser verd.log: :sd=/var/spool/lpd/pser verd: :mx#0: Lines should be i ndented with tabs. More than one prin ter name can be used, with variants se parated by vertical bars (name1|name2). The rm= entry should correspond to the IP address you have as signed to the print server. You can al so use a [...]

7. Print Server Configuration Utility 7.1 Introduction This chapt er introduc es print server ’s syst em configurat ion utilit y in Wind ows environment . This utili ty is autom atically instal led during Windows Adm inistrator Utility installation procedure - refer to section 3.2 and 3.3. This utilit y provides the m ost com plete management and[...]

7.2 Search for All Available Print Server Every time when you run pr int serve r’s configura tion ut ility, click th e “Search” icon on the tool bar. The configuration utility will delay for several seconds because the utility is using syst em’s available network protocol s to se arch for al l prin t serv ers on the network. A ll available [...]

7.3 Status of Print Server Click “Status” icon on the tool ba r, the status of the curren t selected print server will be showed on the right side of the window. The inform ation of th e print server displayed are MA C ID, Model Type, Firmware Version, status o f each pr inter po rt, NetW are file serve r name, NetWare file serv er polling inte[...]

7.4 Setup the Print Server Click “Set up” icon on the tool bar, the se tup items of the current selected print server will be show ed on the right side of the window. Double click one of the ic ons to set up the selected print server . A screen will pop up to verify “U ser Nam e” and “Passw ord” of th e print serv er. The default values[...]

7.5 General Configuration Double Click “G eneral” icon and the General configurat ion window will pop-up. You can see basic print se rve r inform ation in this p age. You also can configure the “Print Se rver Nam e”, “SMB Group Name”, “User Name” and “Password” her e. Server Name , the name of the prin t server. You can use this[...]

7.6 TCP/IP Configuration Double Click “TCP/IP” icon and the T CP/IP conf ig uration window will pop-up. You can configure the print server to autom atically get IP from DHCP server or manua lly specify static I P. Th e print server also has a built-in DHCP server. You can enable th is DHCP server and let it manages IP for you. Click the “IP?[...]

Click the “DHCP Serv er” button to en ter the DHCP se rver’s settin g page. You can “Enable/Disable” th e DHCP server and ass ign a range of IP addres ses here. The DHCP server is di sabled by default. When “ Enable” is selecte d, you have to configure “Sta rting Address”, “E nding Address”, “Gateway” and “DNS”. The pr[...]

7.7 Netware Print Server Configuration Double Click “NetWare” icon and th e NetWare conf iguration window will pop-up. This print server suppo rts NetWare Bindery Prin ting m ethod. The print server periodically polls the NetWare se rver printer queues for printing jobs. You have to assi gn the NetWare ser ver name, print server po llin g inter[...]

7.8 AppleTalk Configuration Double Click “AppleTalk ” icon and the AppleTalk configuration window will pop-up. AppleTalk is a data comm unication protocol often used by Macintoshes. The print server can use these paramete rs to jo in the Ap pleTalk network and share the printer to other AppleTalk wor k stations. You have to setup the “Zone Na[...]

7.9 SNMP Configuration Double Click “SNMP” ic on and the SNMP configuration w indow will pop up. Contact: You can enter the print serv er administrator’s contact informatio n here. This inf ormation will be displ ayed in the SNMP ma nagement tool. Location: You can enter the installed locati on of the print server here. This informatio n will[...]

7.10 SMB Configuration SMB Group Name , the nam e of SMB group that this pr int server be longs to. All PC s hould join the same group be fore they can use th is print server by SMB protocol. Pass Job when Error Occu rred: Wh en the pr inter is inte rrupted becau se of paper out or off line wh ile printing, user can enable this function and set th [...]

7.11 System Configuration Double Click “System” icon and the System configur ation window will pop-up. In the System conf igurat ion page, you can select to enable/dis able each printing or management protoc ol, assign name for each pr inter por t of this print server, and upgrade th e new firm ware for this p rint serv er. Port Name is the nam[...]

7.12 Wizard Click “Wiz ard” icon on the tool bar, the setup wi zard item of the current se lected prin t server will be sh owed on the right si de of the window. Double clic k the “P rint Serv er Setup Wizard ” the setup wizard wi ll guide you through all the setup process. Step 1: Set up the name of this print server and the port name for [...]

Step 2: Select t o enable required pr inting pr otocol. Please refer to se ction 7.12 for detail information. Step 3: Setup the IP of th is print se rver and the DHCP s e rver. Please refer to section 7.6 for detail information. 58[...]

Step 4: Setup the AppleTalk printing. Please refer to sec tion 7.8 for detail informatio n. Step 5: Setup th e NetWar e printing. Please refer to section 7.7 for detail informatio n. 59[...]

Step 6: C lick “Save ” to finis h setting. Pl ease reboot the pr int server to let these settings take effect. 60[...]

7.13 Report Click “Report” icon on the tool bar, the Report window wi ll pop up. The report lists basic in format ion of all availa ble print servers on t he network. The inf ormatio n includes De vice Name, MAC ID , Model Type and Firmware Version of print server. 61[...]

8. W eb Management 62[...]

8.1 Introduction Print serv er can be conf igured a nd managed on the Web. Through Local Area Network, or even Internet, admini strator can easily c onfigure and manage print server’s various main functions in browsers. Si mply enter print serve r’s IP address i nto your browser’s address field to manage a pr int server by p rint server’s b[...]

8.2 Login You may use any Web Browser to revi ew the status or configure the settings of the print server . After entering the IP addr ess of the print server, a login page dis play. You have to ente r correct “User Name ” and “Password” before going to the We b Management pages. Notes: Default User Name is “admin”, default password is [...]

8.3 Device Status 8.3.1 System System Inform ation includes “Dev ice Name”, “P rint Server Name”, “Model Type” , “System U p Time”, “Fi rmwar e Version”, “MAC Address” and the protocols enabled status, etc. 65[...]

8.3.2 Printer The Print Server can communicate wi th the printer to get the printer informatio n includin g printer m anufacturer, mode l number , printin g language supported, and als o the printer’s status . This page lists the info rmation of printers connected to all prin ter ports. 66[...]

8.3.3 TCP/IP This page lists all TCP/ IP settings of the prin t server including “I P Address”, “Subnet Ma sk” and “Gateway”. It also lists DHCP server setting. 67[...]

8.3.4 SMB This page lists the SMB group and the p ass job inter val time settings of the prin t server. 8.3.5 SNMP This page lists the SNMP settings of the print se rver. It includes the settings of “SNMP Sys tem Contact” and “SNMP S ystem Location”. 68[...]

8.3.6 NetWare This page lists NetWare settings, including “Polli ng Time”, “Use Bindery Mode”, “Name of the File Serv er” and “Port Attached Queue”. 69[...]

8.3.7 AppleTalk This page lists AppleTal k settings, including “App leTalk Zone Name” and “Printer Type” of printers co nnected to all print ports. . 70[...]

8.4 Setup Wizard 8.4.1 System You can change the print serve r name and port nam e of the print ser ver from here. Print Server Name , th e name of th e print server . You can use th is name to identify the print server when you are searching for the print server by the administration and clie nt utilities. By defa ult, the print server name is the[...]

8.4.1.1 Admin Password It allows you to change the password of the print server. Name is the administrator name of the pr int server. If you change the user name, you have to login to the print server from admi nistrator uti lity or web management with the new name. The defa ult user name is ”a dmin”. Password, enter the password you want to ch[...]

8.4.1.2 Advanced Settings You can enable/disable th e printing pr otocols and ma nagement tools fr om the screen. To enable the function, please selec t “Enabled”; to disable the function, please se lect “Disabled”. 73[...]

8.4.2 TCP/IP You can configure the print server to autom atically get IP from DHCP server or manua lly specify static I P. Th e print server also has a built-in DHCP server. You can enable th is DHCP server and let it manages IP for you. If you nee d the pr int serv er to auto m atically get an IP from DHCP server, select “Ena ble Obtain TCP/IP S[...]

8.4.3 SMB You can enable/disable th e SMB protocol from here. If SMB is enabled, enter the “SMB Group Name” to specify the SMB group that this print server belongs to. All PC should join th e same group before they can use this print server by SMB protoc ol. Pass Job when Error Occu rred: Wh en the pr inter is inte rrupted becau se of paper out[...]

8.4.4 SNMP The prin t server suppor ts SNMP configuration. If it is enabled, please set up the following parameters. SNMP System Co ntact: You can enter the print server admi nistrator’s contact information here. This in formation will be disp layed in the SNMP management tool. SNMP System Location: You can enter th e installed location of th e p[...]

8.4.5 NetWare This print server suppo rts NetWare Bindery Prin ting m ethod. The print server periodically polls the NetWare se rver printer queues for printing jobs. You have to assi gn the NetWare ser ver name, print server po llin g interva l and the name of queu e on the NetWar e server for each printer port. Polling Time is the pollin g interv[...]

8.4.6 AppleTalk AppleTalk is a data comm unication protocol often used by Macintoshes. The print server can use these paramete rs to jo in the Ap pleTalk network and share the printer to other AppleTal k workst ations. You have to select to enable or disable Appl eTalk, and setup the “Zone Nam e” and “Printer Type” fo r each printer port of[...]

. 8.4.7 Save Settings You can click the “Save Se ttings” to save the se ttings and restart the system. 79[...]

8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory defa ult settings. A ll of your previous setup w ill be cleared. 80[...]

8.5.2 Upgrade You can upgrade new firmwa re fo r this print serve r in this page. Click “Browse” to select the new firmware in your storage and th en click “OK”, the firmware will be update d in several minutes. Note that before you upg rade the firmware please make sure that the IP Address settings o the print server are in the same ne two[...]

9.T elnet Management 9.1 Introduction Print server can be configured and m anaged by Telnet. Through Local Area Network, or even Inte rnet, adminis trator can ea sily configure and manage prin t server’s vari ous main functions by a telnet client. 82[...]

9.2 Login Execute the Telnet clie nt tool and connect to the print serve r IP. telnet 192.168.2.2 Then you will be prompted to en ter the userna me and password. After you succ essfully enter the c orrect username and pa ssword, the following prompt will be displayed and you can star t to m anage this print server by command. admin# 83[...]

9.3 Get Setting Values – “get” Command “get” command is used to get the settin g values of this pr int server. The format of “get” comm and is as following : get argument Then the argument value will be disp layed after the comm and. For example, if I want to get IP address of the prin t server, I type “get ip” command and the IP [...]

on the NetWare server PORT1_QNAME=’PQ1’ applezone The name of AppleTalk zone that this print server joins to admin# get applezone PORT1_APPLEAONE=’*’ printertype1 The type of the printer attached to this print server admin# get printertype1 PORT1_PRINTTYPE=’LaserWri ter’ SMBDG The name of the SMB group name that this print server joins [...]

9.4 Modify Setting Values – “set” Command “set” command is u sed to modify the se tting values of th is print se rver. The format of “set” comm and is as following: set argumen t_name va lue Then the value will be wr itten into the sy stem configuratio n. For example, if you want to set IP address of the pr int server to 192.168.2.2, [...]

SNMPC The administrator contact information of this print server for SNMP set SNMPC sbdjohn@hotm ail.com SNMPL The installed location of this print server for SNMP set SNMPL Room301 port1 The port name of this print server set port1 lpt1 DHCPS Enable or disable the DHCP server. The value should be “disabled” or “enabled”. set DHCPS disable [...]

9.5 Other Commands 9.5.1 ipconfig “ipconfig” command is used to qu ickly get the IP se ttings (IP, subn et mask, default gatew ay) of the p rint serve r: admin# ipconfig IP_ADDR=192.168.2.2 SUBNET_MASK=255.255.255.0 DEFAULT_GATEWAY=192.168.2.254 9.5.2 reboot “reboot” command is use d to restart the print serv er: admin# reboot 9.5.3 exit ?[...]

get argument ipconfig reboot exit 89[...]

10. IPP Printing 10.1 Introduction IPP (Internet Printing Pr otocol) Printing provides a convenie nt way of remote printing service by TCP/IP. The print server can suppor t IPP printing by default. It is need less to do any setting. Any PC that can support IPP printing, for example Windows 2000/XP, can directly uses th e print server by IP. By usin[...]

10.2 System Setup 10.2.1 Print Server Side It is needless to do any setting on the print server side. Make su re the print server has corr ect IP settings. If you want to share the prin ters to Internet users, you have to set a real IP to the print server. You also have to make sure that any gatewa y; router or firewall doe s not block IPP protoc o[...]

Step4. Select “A ne twork printer, or a p rinter attac hed to anothe r computer”. Click “Next”. Step5. Select “Connect to a printer on th e Internet or on a hom e or office network” and enter th e URL of print server. T he URL format is “http://IP:631 /Port Name”. The IP should b e the print se rve r’s IP. The number 631 is IPP st[...]

of the URL is http://192. 168.3.66:631/lpt1. After ente ring the URL of print server, click “Next”. S t e p 6 . S e l e c t a s u i t a b le printer manufa cturer and the printer model and click “Next”. If your printe r is not in the list, click “Have D isk…” to install the driver of the p rinter. After insta llation, th e printe r mo[...]

Step7. Choose to set the print whet her as a defa ult printer or not . Click “Next”. Step8. You have added the network printer to the PC suc cessfully. The informatio n of the pr inter is d isplayed in the win dows. Click “Finish”. 94[...]

95[...]

1 1. LPR Setting in MAC OS LPR Printing (Line P r inter Remote tech nology) allo ws Macintosh computers to connect to pr inters via TCP/IP. LPR Prin ting can be se t up on any Macintosh with ve rsion 9.x above. To enable LPR Printing in Macintosh, please follow the procedures below. Step1. In the Desktop, click “System Preferences ”. Step2. Cli[...]

Step4. Click “Add ” to ad d the new Prin t Server th rough TCP/IP. Step5. Enter the “Printer Type”, “Printer Add ress” and “Queue Nam e” and select the “Printer Model” to se tup the Print Serve r . Click “Add” to contin ue. Printer Type: LPD/LPR 97[...]

Printer Address: Input the IP Address of the Print Se rver Queue Name: The queue name of the Print Server is “lpt1” Printer Model: Select the Printer M odel that is attached to th e Print Server. Step6. The Print Serv er is installed completely . You can see it i n the “Printer List”. 98[...]

Step7. You can print a file to check whether the Print Server is installed successfully. 99[...]

12. UPnP Setup When the UPnP function is enabled, the print server can be detected by UPnP compliant system such as W indows XP. The print server will be displayed in the Ne ighborhood of Windows XP , so you can direct ly double click the print se rver or righ t click the pr int serv er and selec t “Invoke” to directly get into th e we b page o[...]

Step1. Click “Yes” on the above message or click “Start”, choose “Settings” and select “Network Co nnections” to ena ble UPnP manually. Step2. Right click th e “Local Area C onnection” and select “Properties”. 101[...]

Step3. In the “Local Area Connection Properti es”, select “Advanced” option menu and click “Settings”. 102[...]

Step4. The “Windows Firewall” screen will be popped up, select “Exceptions” opti on menu. Step5. Enable “UPnP Framework” f r om the “Program s and Services list” and click “Ok”. 103[...]

104[...]

13. Windows XP SP2 Setup In Windows XP SP2, XP SP2’s f i rewall would block the unknown communications . This prin t server ha s allowed the communica tions data passed through the XP SP2’s firewall. In case that you do not fi nd any print server listed on the “A vailable Ports” in “Network Ports Quick S etup”, please f ollow the steps [...]

106[...]

Step4. Select “Exceptions” tab and click “Add Program…”. 107[...]

Step5. Click “Browse” to add a new program . Step6. Open the “NPUtil” file f rom “C:P rogram File sPrintServer Utilities” (where C: is the system drive). Step7. A new program “Network Port s Quick Setup” is di splayed in the list, click “Ok”. 108[...]

Step8. Click “Ok”. You have co mpleted the setting. The Window s XP SP2 will allow the incoming network connections activated by the progra m. 109[...]