Alliance Laundry Systems Stacked Drying Tumbler manual

www .comlaundry .com Installation/Operation/Maintenance Stack ed Drying T umbler Models with Electronic Control Part No. M412060R2 May 2006 K eep These Instructions F or Futur e Reference. (If this tumbler changes ownership, be s u re this manual accompanies the tumbler).[...]

[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M412060 1 IMPOR T ANT : Inf ormation must be obtained fr om y our lo cal gas supplier on instructions to be f ollowed if the user smells gas. These instructions must be posted in a pr ominent location. Step-by-step instructions of the abov e inf ormation must be posted in a pr o[...]

2 M412060 © Co p yright, Alliance Laundr y Systems LLC – DO NOT COPY or TRANSMIT IMPOR T ANT : W arranty is void unless dr ying tumbler is installed according to instructions in this manual. Compliance with minimum specif ications and r equir eme nts detailed her ein, and wi th appl icable local gas f itting re gulations, municipal b uilding cod[...]

© Copyright, Alliance Laundry Syst ems LLC – DO NOT COPY or TRANSMIT © Copyright 2006, Alliance Laundry Systems LLC All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in an y form or by any means without the e xpressed written consent of the publisher . M412060 3 Ta b l e o f Contents Information For Ha[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4 M412060 Preventive Maintenance Instructions ................................. .............. 33 Daily ................... .................. ....................... .................. ....................... 33 Lint Removal ............... .................. ..................[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 M412060 Impor tant Safety Instructions (Save These Instructions) 1. Read all instructions before using the tumbler . 2. Refer to the GR OUNDI NG INSTR UCTIONS in the INST ALLA TION manual for the proper grounding of th e tumbler . 3. Do not dry articles that ha ve been pre vio[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Important Safety Instructions M412060 6 22. Always read and follo w manufacturer’ s instructions on package s of laundry and cleanin g aids. Heed all warnings or precautions. T o reduce the risk of poisoning or chemical b urns, keep them out of reach of children at all times ([...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 M412060 Intr oduction Nameplate Inf ormation When writing for information on an y tumbler , be sure to mention model and serial numbers. The model an d serial numbers will be fo und on the nameplate as sho wn. Replacement P arts Information If replacement parts are required, c[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M412060 8 Notes[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9 M412060 Dimensions and Specifications Cabinet Dimensions TMB2152N 28-1/4 in (71.8 cm) Clearances Minimum to nearest comb ustible material. T op - 12 in (30.5 cm) minim um. 0 in permitted for fir st 4 in (10.2 cm) along front of mac hine. Back - 0 in - 24 in (0 - 61 cm) minimum[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Dimensions and Specifications M412060 10 Specifications Con version T ab le Cabinet Finish: Electrostatically applied thermosetting polyester Cylinder Size: 30 in x 25 in (76.2 x 63.5 cm) perforated galv anized st eel with three baf fles Air Outlet: 6 in (15.24 cm) T otal Dry W [...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11 M412060 Installation Instructions Receiving Inspection Upon deli very , visually insp ect cra te, carton and parts for any visible shipping damage. If the crate, carton or cov er are damaged, or signs of possible damage are e vidence, hav e the carrier note the condition on t[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 12 Individual V enting For maximum ef ficiency and performance, it is preferred to e xhaust tumbler(s) indi vidually to the outdoors. Refer to F igur e 1 and 2 . AT N O P O I N T MA Y THE CR OSS AREA OF INST ALLED VENTING BE LESS THAN THE CR OS[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 13 M412060 Individual Exhaust Collector Duct Figure 1 VERTICAL EXHA UST INST ALLA TION HO RIZONT AL EXHA UST INST ALLA TION 180° Sweep Elbow No Screen or Cap 2 in (5.1 cm) Minimum Clearance 30 in (76.2 cm) Minimum Clearance 0 in Clearance P ermitted fo[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 14 Manif old Construction Figure 3 TMB2155N 10 in (25.4 cm) Inside Diameter 17.50 in (44. 5 cm) 36.10 in (91.7 cm) 2 in (5.1 cm) TYP Standard Stov e Pipe Crimp 6 in (15.2 cm) Inside Diamet er (2) Places Rivet to Duct (8) Rivets (2) Places Flush[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 15 M412060 Combined Exhaust Manif old Figure 4 VERTICAL EXHA UST INST ALLA TION HO RIZONT AL EXHA UST INST ALLA TION 180° Sweep Elbow No Screen or Cap 2 in (5.1 cm) Minimum Clearance 30 in (76.2 cm) Minimum Clearance 0 in Clearance P ermitted for Fi rs[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 16 Make-Up Air A tumbler is forced-air exhausted and requires provisions for mak e-up air to replace the air exhausted by the tumbler . The manufacturer’ s recommended make up air opening for each tumbler is 1 44 square inches (929 sq. cm) of[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 17 M412060 IMPOR T ANT : Do not lift under the bel t guard or tip the unit. Serious driv e train damage will occur . Leveli ng the Drying T umbler Each tumbler should be le veled within 1/8 inch (3 mm) from front to rear and 1/8 inch (3 mm) from side to[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 18 Gas Requirements (G as Drying T umbler s) Before connecting the gas piping to the tumbler , make certain that gas service is th e same as that specif ied on the serial plate. IMPOR T ANT : Any product r e visions or con v ersions must be mad[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 19 M412060 If the gas service is not the same as that specified, DO NO T CONNECT THE GAS LINE T O THE TUMBLER! It will f irst be necessary to con vert the gas burner orif ices. IMPOR T ANT : Any product r e visions or con v ersions must be made by the M[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 20 Gas Pipe Size Required For 1,000 Btu Natural Gas – 0.64 Specific Gra vity at 7 ± 1.5 Inches (17 .4 ± 4 mbar , 1.74 ± 0.37 kP a) W ater Column Pressure Equiv alent Length Gas Appliances To t a l Btu/hr . 25 feet (7.63 m) 50 feet (15.25 m[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 21 M412060 Gas Requirements (continued) Example Of Gas Supply Piping Figure 8 Figure 9 Gas Furnace Gas Wa t e r Heaters Gas Space Heaters Gas Meter IMPORT ANT: Line pressure m ust be maintained at 6-1/2 ± 1-1/2 water column inc hes f or Natural Ga s (1[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 22 Electrical Requirements Requirements Provide adequate wiring and a 20 amp circuit breaker for each stacked tumbler . The unit is designed to accept ONE electrical hook-up th rough the top pocket only . The tumbler is pre wired to electricall[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 23 M412060 1. Install a fused disconnect switch, or a circuit breaker , as close to the tumbler as possible. If more than one stacked tumb ler is being installed, provide a disconnect switch or circuit breaker for each. This will make it possible to ind[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation In structions M412060 24 Before connecting the gas piping to the tumbler , make certain that gas service is th e same as that specif ied on the nameplate (belo w the gas connection). Refer to F igur e 11 . N A TU RAL GAS service must be supplied at 6-1/2 ± 1-1/2 in[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Instructions 25 M412060 Instructions f or Lighting and Shutting Do wn Instant Electr onic Ignition System 1. T urn gas shut-off v alv e to “on” position (handle parallel with gas line). Refer to Fi g u re 1 2 . 2. Start tumbler in drying cycle. Spark igniter wil[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M412060 26 Notes[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 27 M412060 Adjustments Air Flow Switc h The air flo w s witch on the 32DG m odel is set at the factory for pr oper operation. IMPOR T ANT : Air flow switch v ane must remain closed during operation. If it opens and closes during the drying cycle, this indicates insuff icient air[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Adjustments M412060 28 Figure 13 Door Ta b TMB2163N Door Switch Front Serial Plate Location Figure 14 TMB2164N[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 29 M412060 Operating Chec ks Electr onic Contr ol The stack ed tumbler come s equipped with an Electronic Control. The El ectronic Control gi ves the o wner a v ariety of programming options. T o learn how to use the Electronic Contro l in more detail, consult the supplemental m[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M412060 30 Notes[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 31 M412060 Operating Instructions The follo wing steps outline the procedure for operating the tumbler through a complete drying cycle. IMPOR T ANT : DO NO T TUMBLE f iberglass curtains and draperies unle ss the label says it can be done. If they ar e dried, wipe out the cylinde[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M412060 32 Notes[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 33 M412060 Pre ventive Maintenance Instructions Daily Li n t R em ova l 1. Unlock the lint dra wer and remov e it. Refer to F igur e 15 . 2. Remov e all accumulated l int in the lint compartment area by tipping the dra wer ov er a garbage collection can or similar container . 3.[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Preventive Main tenance In structions M412060 34 Figure 15 TMB2165N[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Preventive Mainten ance Instruct ions 35 M412060 Every Six Months Lint Remov al and Cylinder Belt Inspection Drive System 1. Remov e belt guard co v er . 2. Clean the lint and an y other foreign materials from the air vents located on the front and back of the driv e motor . The[...]

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Preventive Main tenance In structions M412060 36 Three Month Maintenance (D A TES) Clean air vents on dri v e motor . Check and clean steam coils. (Steam Models Only) Clean exhaust ducts. Check flo w of comb ustion air . Check flo w of v entilation air . Check belt tension. Chec[...]