AOC e936Swa manual

[...]

2 Safety ........................................................................................................................................................................ 4 National Conventions ......................................................................................................................................... 4 Power ...[...]

3 EPEA T Declaration ............................................................................................................................... ........... 56 Service ............................................................................................................................... ..................................... 57 W arranty[...]

Safety National Conventions The following subsections describe n otational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accompanied by an icon and printe d in bold type or in italic type. These blocks are notes, cautions, and warn ings, and they are used as follo ws: NOTE: A NOTE in[...]

Power The monitor should be operat ed only from the type of power source indicat ed on the label. If you ar e not sure of the type of power supplied to your hom e, consu lt your dealer or local power company . The monitor is equipped with a three-pronged grounde d plug, a plug with a third (groundin g) pin. This plug will fit only into a grounded p[...]

Inst allation Do not place the monitor on a n unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follo w the manufacturer ’s instructions when installing [...]

7[...]

Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will c auterize the product cabinet. When cleaning, make sure no detergent is leaked into the pr oduct. The cleaning cloth s hould not be too ro ugh as it will scratch the screen surface. Please disconne[...]

Other If the product is emitting a strange smell, sound or smoke, disconnect the po wer plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating ope nin gs are not blocked by a table or curtain. Do not engage the LCD monitor in severe vib ration or high impact conditions during operation. Do not knock or drop the monitor dur[...]

Setup Content s in Box Not all signal cables (Analog, DVI, USB, Audio, and HDMI cables) will be provid ed for all countries and regio ns. Please check with the local deal er or AOC branch office for confirmation. 10[...]

Setup S t and & Base Please setup or remove the base follo wing the steps as below . Setup: Remove: 11[...]

Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the mon i tor when you change the mon itor's angle. Y ou are able to adjust the monitor's angle from -5° to 20 °. NOTE: Do not touch[...]

Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. Power 2. Analo g (DB-15 VGA cable) 3. Audio T o protect equipment, always turn of f the PC and LCD monitor before connecting. 1 Co nnect the po wer cable to the AC port on the back of the monitor . 2 Co nnect o ne end of the 15-pin D-Sub cable to the back of the monitor an[...]

W all Mounting Preparing to Install An Optional Wall Mounting Arm. This monitor can be attached to a wall mounting arm you p urchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructi ons to assemble the wall mounting arm. 3 Plac e the wall mounting arm onto t he b [...]

Adjusting Setting Optimal Resolution Windows Vist a For Windows Vist a: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Pers onalization. 4 Click Personalization 15[...]

5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1366 by 768. 16[...]

Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y . 17[...]

6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1366 by 768. Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1366 by 768. 18[...]

Hotkeys Power Press to turn on or tu rn of f the monitor . Menu / Enter Press to activate OSD, then press Up or Down to navig ate through the functions. Once the desir ed f unction is highlighted, press the Menu button to activate the subme n u. In sub-menu, Press Up or Down to navigate through the functions. Once the desired function is highlig ht[...]

OSD Setting Basic and simple instruction o n the control keys. When you pres s the MENU bu tton on the fr ont control of your monitor , the On DOWN Screen Display (OSD) Main Controls window will pop up and you can th en start making adjustments to your monitor's various features. Use the UP or DOWN keys to make your adjustments. Follow the ste[...]

Eco mode 21[...]

Item Icon Function Adjust Range Description Dynamic contrast ratio DCR Select to active S tandard Select to active S tandard Mode T ext Select to active T ext Mode Internet Select to ac tive 22 Internet Mode Game Select to active Game Mode Movie Select to active Movie Mo de Eco mode S ports Select to active S ports Mode Notes : When Eco mode is not[...]

Color Boost 23[...]

Item Icon Function Adjust Range Description Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Sky-blue on or off Disable or Enable Sky-b lue Mode Green Field on or off Disable or Ena ble Green Field Mode Auto Detect on or off Disable or Enable AutoDetect Mode Demo on or off Disable o[...]

Luminance 25[...]

Item Icon Function Adjust Range Description Brightness 00-100 Contrast 00-100 Gamma Gamma1, 2, 3 Adjust to Gamma1, Gamma2, Gamma3 Luminance Exit Exit to main menu Notes : When Eco mode is not set as “S tandard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, Contrast, Brightness, Eco mode and Gamma can not be adjusted[...]

Image Setup 27[...]

Item Icon Function Adjust Range Description Clock 00-100 Adjust picture Clock to reduce V ertical-Line noise. Phase 00-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 00-100 Adjust the vertical position of the picture. V. P o s i t i o n 00-100 Adjust the horizontal position of the picture. Image Setup Exit Exit to main menu Not[...]

Color T emperature 29[...]

30 Item Function Adjust Range Description Icon User Red 00-100 Red Gain from Digital-register User Green 00-100 Green Gain Digital-register . User Blue 00-100 Blue Gain from Digital-register Normal 7300K Recall Normal Color T emperature from EEPROM. W arm 650 0K Recall W arm Color T emperature from EEPROM. Cool 9300K Recall Cool Color T emperature [...]

Picture Boost 31[...]

32 Item Icon Function Adjust Range Description Horizontal Position 00-100 Adjust Frame horizontal Position V ertical Position 00-100 Adjust Frame vertical Position Contrast 00-100 Adjust Frame Contrast Brightness 00-100 Adjust Frame Brightness Frame Size 14-100 Adjust Frame Size Bright Frame on or off Disable or Enable Bright Frame Picture Boost Ex[...]

Extra Setting 33[...]

Item Icon Function Adjust Range Description Language Select the OSD language Reset yes or no Reset the menu to default DDC-CI yes or no T urn ON/OFF DDC-CI Support T imeout 05-120 Adjust the OSD T imeout T ransp arence 00-100 Adjust the transparence of OSD H. Position 00-100 Adjust the vertical position of OSD V . Position 00-100 Adjust the horizon[...]

Exit 35[...]

LED Indicator Stat us LED Color Full Power Mode Blue Active-off Mode Orange 36[...]

37 Driver Monitor Driver Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'S ettings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the &[...]

Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Appe arance and Themes’ 4. Click on the 'Display' Item. 38[...]

5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow[...]

8. Select the 'Install from a list or specific location [ advanced]' radio button and the n click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the &apo[...]

Windows Vist a 1. Click "S tart " and "Control Panel". Then, doubl e-click on " Appe arance and Personalizati on". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...". 41[...]

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Update Drive[...]

Windows 7 1.S tart Windows® 7 2.Click on the 'St art' button and then cl ick o n 'Control Panel'. 3. Click on the 'Display' icon. 4.Ckick on the “Change display settings ” button. 43[...]

5. Click the “ A dvanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button. 7.Click the “Driver” tab. 44[...]

8. Open the "Update Driver Soft ware-Generi c PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my compute r" . 10. Click the “Have Disk” button. Click on the “Brow se” button an[...]

46 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Next” button. The files will be copi ed from the CD to your hard disk drive. 1 3. Close all open windows and remove the CD. 14. Restart the system. The system will automatically select the maximum r[...]

i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor d isplay setting by using on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installation guide. 47[...]

T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is pro perly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and po wer supply . Is the cable connected correctly? (Co[...]

49 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent. Make sure your computer is operati[...]

50 S pecification General S pecification Model name e936Swa Driving system TFT Color LCD Viewable Image Size 47.0cm di agonal Pixel pitch 0.3mm(H) x 0.3mm(V) Video R, G, B Analog lnterface Separate Sync. H/V TTL Display Color 16.7M Colors LCD Panel Dot Clock 85.5MHz Horizontal scan range 30 kHz - 80 kHz Horizontal scan Size (Max imum) 409.8mm Verti[...]

51 Operating 0° to 40° Temperature: Non-Operating -20°to 60° Operating 10% to 85% (non-condensing ) Humidity: Non-Operating 5% to 80% (non-condensing) Operating 0~ 3000m (0~ 10000 ft ) Environmental Altitude: Non-Operating 0~ 5000m (0~ 15000 ft ) Preset Display Modes ST AND RESOLUTION HORIZONT AL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) VGA 640×4[...]

Pin Assignment s Pin Number 15-Pin Side of the Signal Cabl e 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V- s y n c 15 DDC-Serial clock 52[...]

53 Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities accordi ng to the V ESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, dependi ng on th e level of DDC used, communicate additi ona l information about its display capabilities. The DDC2B is a bi-directional data[...]

54 Regulation FCC Notice FCC Class B Radio Freq u ency Interference St atement WA RNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonabl e protectio n ag ainst harmful interference [...]

WEEE Declaration Disposal of W aste Equipment b y Users in Pr ivate Hous ehold in the Europe an Union. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.Instead, it is yo ur responsibility to dis pose of your waste equipment by handing it over to a designated coll e[...]

EPEA T Declaration EPEA T is a system to help purchasers in the public an d private sectors evaluate, compare and sel ect desktop computers, notebooks and monitors ba sed on their environmental attributes . EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunit y for manufactur[...]

Service W arranty St atement for Europe LIMITED THREE-YEAR WARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of c onsumer purchase. During this per iod, AOC International (Europe) GmbH will,[...]

58 This limited warranty does not cover any of the product fi rmware or hardware that you or an y third party have modified or altered; you bear the sole responsibilit y and liability for any such modific ation or alteration. ALL EXPRESS AND IMPLIED W A RRANT IES FOR THIS PRODUCT (INCLUDING THE W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR[...]

W arranty St atement for North & South America (excluding Brazil) W ARRANTY ST A TEMENT for AOC Color Monitors Including those Sold within North America as S pecified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT[...]

60 ALL EXPRESS AND IMPLIED W A RRANT IES FOR THIS PRODUCT (INCLUDING THE W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION TO A PERIOD OF THREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMP[...]