Asus CUV266-DLS manual

® CUV266-DLS JumperFree ™ DDR SDRAM 133MHz FSB AGP Pro/4X Dual Socket 370 Motherboard USER ’ S MANUAL[...]

ASUS CUV266-DLS User’ s Manual 2 USER'S NOTICE Product Name: ASUS CUV266-DLS Manual Revision: 1.01 E788 Release Date: September 2001 No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any mean[...]

ASUS CUV266-DLS User’ s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support MB/Others (T el): +886-2-2890-7121 (English) Notebook (T el): +886-2-2890-7122 (English) D[...]

ASUS CUV266-DLS User’ s Manual 4 CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Or ganized ................................................... 7 1.2 Item Checklist .............................................................................. 7 2. FEA TURES .........[...]

ASUS CUV266-DLS User’ s Manual 5 CONTENTS 4.3 Main Menu ................................................................................. 52 4.3.1 Primary & Secondary Master/Slave ................................. 53 4.3.2 Keyboard Features ............................................................ 56 4.4 Advanced Menu .....................[...]

ASUS CUV266-DLS User’ s Manual 6 FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may caus[...]

ASUS CUV266-DLS User ’ s Manual 7 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEA TURES Production information and specifications 3. HARDW ARE SETUP Instructions on setting up the motherboard. 4. BIOS SETUP Instructions on setting up the BIOS 5. SOFTW ARE[...]

8 ASUS CUV266-DLS User ’ s Manual 2.1 ASUS CUV266-DLS Motherboard The ASUS CUV266-DLS motherboard is tar geted for diverse types of home PCs, workstations and servers. Powered by the dual Intel ® Pentium ® III processor the CUV266-DLS superbly complies with today’ s demand for a flexible high-integration system. 2.1.1 Specifications • Lates[...]

ASUS CUV266-DLS User ’ s Manual 9 2. FEA TURES 2. FEA TURES Specifications • AGP Pro Slot: Comes with an Accelerated Graphics Port (AGP) Pro slot that supports high performance AGP cards targeted at 3D graphical applications supporting 66MHz 4X mode. The slot is backward compatible with AGP 4X/2X cards. • W ake-On-LAN: Supports W ake-On-LAN a[...]

10 ASUS CUV266-DLS User ’ s Manual 2. FEA TURES Performance 2. FEA TURES 2.1.2 Performance • ACPI Ready: A dvanced C onfiguration P ower I nterface (ACPI) provides more Ener gy Saving Features for operating systems that support OS Direct Power Management (OSPM) functionality . W ith these features employed in the OS, PCs can be ready around the[...]

ASUS CUV266-DLS User ’ s Manual 11 2. FEA TURES 2. FEA TURES Intelligence 2.1.3 Intelligence • Auto Fan Off: The system fans powers of f automatically even in sleep mode. This function reduces both ener gy consumption and system noise, and is an important feature in implementing silent PC systems. • Dual Function Power Button: Pushing the pow[...]

12 ASUS CUV266-DLS User ’ s Manual 2. FEA TURES 2. FEA TURES M/B Components Location Processor Support Dual Socket 370 for Pentium III Coppermine Processors ....... 1 Frequency Setting DIP Switches ............................................ 13 Chipsets VI A VT8633 North Bridge ..................................................... 26 VIA VT8233 [...]

ASUS CUV266-DLS User ’ s Manual 13 2. FEA TURES 2. FEA TURES Motherboard Parts 2.2.1 Component Locations 23 29 27 28 24 4 8 12 18 21 22 11 16 1 6 25 2 20 19 5 7 9 14 15 13 3 10 17 26[...]

14 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP 3.1 Motherboard Layout Motherboard Layout 3. H/W SETUP 30.5cm (12.0in) SCSI-B SCSI-A CLRTC ® Primary IDE SecondaryIDE P ANEL PCI 2 WOL_CON FLOPPY CUV266-DLS Socket 370 USB2_3 CHASSIS VIA VT8233 Chipset ASUS ASIC with Hardware Monitor PCI 1 IR_CON Accelerated Graphics Port (AGP PRO) VIA VT8633[...]

ASUS CUV266-DLS User ’ s Manual 15 3. HARDW ARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN p . 17 JumperFree Mode Setting (Disabled/Enabled) 2) DIP_SW 1–5 p . 18 CPU External Frequency Selection 3) USB01_PWR/USB23_PWR/ p. 19 USB Device W ake-up (Disabled/Enabled) USB45_PWR 4) KB_PWR p. 19 Keyboard W ake-up (Disabled/Enabled) 5) CLR T[...]

16 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Layout Contents 3. H/W SETUP 3.3 Hardware Setup Procedure Complete the following steps before using your computer: 1. Check motherboard settings 2. Install memory modules 3. Install the Central Pr ocessing Unit (CPU) 4. Install Expansion Cards 5. Connect ribbon cables, panel wires, and power s[...]

ASUS CUV266-DLS User ’ s Manual 17 3. HARDW ARE SETUP 3. H/W SETUP Motherboard Settings Motherboard Fr equency Settings (DIP Switches) The motherboard frequency is adjusted through the DIP switches. The white block represents the switch ’ s position. The illustration below shows all the switches in the OFF position. 1) JumperFree ™ Mode (JEN)[...]

18 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP 2) CPU External Fr equency Selection (DIP_F Switches 1 – 5) This option tells the clock generator what frequency to send to the CPU, DRAM, and the PCI bus. This allows the selection of the CPU ’ s External frequency (or BUS Clock ). The BUS Clock multiplied by the Frequency Multiple equals[...]

ASUS CUV266-DLS User ’ s Manual 19 3. HARDW ARE SETUP 3. H/W SETUP Motherboard Settings 4) Keyboard W ake-up (3-pin KB_PWR) This jumper allows you to enable or disable the keyboard wake up feature. Set this jumper to ENABLED if you wish to use the keyboard to wake up the computer when you press the<Spacebar>. This feature requires an A TX p[...]

20 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP 3. H/W SETUP Motherboard Settings 5) Clear R TC RAM (CLR TC) This jumper allows you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS R TC RAM data. The RAM data in CMOS, which include system setup in[...]

ASUS CUV266-DLS User ’ s Manual 21 3. HARDW ARE SETUP 6) LAN Enable/Disable Jumper (3-pin LAN_EN) This jumper allows you to enable or disable the Local Area Network (LAN) feature on the motherboard. The default setting is ENABLE. ® CUV266-DLS 0 1 0 1 0 1 0 1 CUV266-DLS Lan Setting Enable Disable 1 2 2 3 LAN_EN 7) SCSI Enable/Disable Jumper (3-pi[...]

22 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP NOTES[...]

ASUS CUV266-DLS User ’ s Manual 23 3. HARDW ARE SETUP System Memory 3. H/W SETUP 3.5 System Memory This motherboard supports both registered and unbuffered Double Data Rate (DDR) Dual Inline Memory Modules (DIMMs). Four DDR DIMM sockets are available for 2.5V (power level) DDR Synchronous Dynamic Random Access Memory (DDR SDRAM) of 64, 128, 256, [...]

24 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP A 184-pin DDR SDRAM DIMM has a single notch near the center . The number of pins are different on either side of the notch so the module only fits in one direction. Insert a DDR DIMM into the DDR socket as shown. W ARNING! Make sure that you unplug the power supply when adding or removing memo[...]

ASUS CUV266-DLS User ’ s Manual 25 3. HARDW ARE SETUP 3.6 Central Processing Unit (CPU) The motherboard comes with dual Socket 370 for the Intel Pentium III Coppermine CPUs listed in 2.1.1 Specifications . The following illustration shows the CPU socket location on the motherboard and the correct CPU orientation. Note in the illustration that CPU[...]

26 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP CPU Installation 3. H/W SETUP 3.6.1 CPU Installation Follow these steps to install a CPU. 1. Locate the ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways then lifting it up to a 90 ° -100 ° angle. 5. When the CPU is in place, press it firmly on the socket whi[...]

ASUS CUV266-DLS User ’ s Manual 27 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP 3.7 Expansion Cards In the future, you may need to install expansion cards. The motherboard has five PCI expansion slots to support these cards. Follow the steps in the next section when installing expansion cards. W ARNING! Unplug the system power cord when adding[...]

28 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP 3.7.2 Assigning IRQs for Expansion Cards Some expansion cards need an IRQ to operate. Generally , an IRQ must be exclusively assigned to one use. In a standard design, there are 16 IRQs available but most of them are already in use, leaving 6 IRQs free for expansio[...]

ASUS CUV266-DLS User ’ s Manual 29 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP 3.7.3 Accelerated Graphics Port (AGP) Pro Slot This motherboard has an Accelerated Graphics Port (AGP) Pro slot to support the new generation of graphics cards with ultra-high memory bandwidth. CAUTION! The AGP Pro slot is shipped with a warning label over the 20-p[...]

30 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP NOTES[...]

ASUS CUV266-DLS User ’ s Manual 31 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.8 Connectors 3.8.1 External Connectors 1) PS/2 Mouse Port (Gr een 6-pin PS2KBMS) The system automatically directs IRQ12 to the PS/2 mouse if one is detected. If no mouse is detected, IRQ12 become available to expansion cards. See PS/2 Mouse Function Control in 4.4 Adv[...]

32 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP 5) Serial Ports (T eal/T ur quoise 9-pin COM1 / 9-pin COM2) T wo serial ports can be used for pointing devices or other serial devices. T o enable these ports, see Onboard Serial Port 1 / Onboard Serial Port 2 in 4.4.2 I/O Device Configuration for the settings. 4) Paral[...]

ASUS CUV266-DLS User ’ s Manual 33 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.8.2 Internal Connectors 2) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to pr [...]

34 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP IMPORT ANT : For UltraDMA/ 100/66 IDE devices, use a 40-pin 80-conductor IDE cable. The UltraDMA/66 cable included in the motherboard package also supports UltraDMA/100. 3) Primary (Blue) / Secondary IDE Connectors (40-1 pin IDE1/IDE2) These connectors support the provi[...]

ASUS CUV266-DLS User ’ s Manual 35 3. HARDW ARE SETUP Connectors 3. H/W SETUP 4) W ake-On-LAN Connector ( 3 -pin WOL_CON) This connector connects to a LAN card with a W ake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPOR T ANT : This feature requires that W ake On LAN or PCI[...]

36 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP 6) T wo 68-pin Ultra 160 SCSI Connectors (SCSI-A, SCSI-B) This motherboard has two 68-pin Ultra 160 SCSI connectors; one for each of the two channels. Each channel can support a maximum of 15 devices as specified by Ultra 160 standards. ® CUV266-DLS 0 1 0 1 0 1 0 1 CUV[...]

ASUS CUV266-DLS User ’ s Manual 37 3. HARDW ARE SETUP Connectors 3. H/W SETUP NOTE: Ultra 160 SCSI devices do not have termination jumpers and must use a separate terminator on the last connector (internal) or device (external). ® CUV266-DLS 0 1 0 1 0 1 0 1 CUV266-DLS SCSI LED ON LED2 LED3 ON SCSI-B DEVICE ACTIVE SCSI-A DEVICE ACTIVE[...]

38 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP 7) CPU Fan and Chassis Fan Connectors (CPU1_F AN, CPU2_F AN, CHA_F AN) The three fan connectors support cooling fans of 350mA (4.2 W atts) or less. Orient the fans such that it blows air across the onboard heat sinks instead of the expansion slots. The fan wiring and pl[...]

ASUS CUV266-DLS User ’ s Manual 39 3. HARDW ARE SETUP Connectors 3. H/W SETUP 9) Infrar ed Module Connector (5-pin IR) This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. Y ou must also configure the setting through UAR T2 Use Inf[...]

40 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP 1 1) Power Supply Connectors (20-pin block A TXPWR, 6-pin EAUXPWR) These connectors connect to an A TX 12 V power supply . The plugs from the power supply fit in only one orientation because of the different hole sizes. Find the proper orientation and push down firmly m[...]

ASUS CUV266-DLS User ’ s Manual 41 3. HARDW ARE SETUP Connectors 3. H/W SETUP 12) SMBus Connector (5-1 pin SMB_CON) This connector allows you to connect SMBus (System Management Bus) devices. SMBus devices communicate by means of the SMBus with an SMBus host and/or other SMBus devices. SMBus is a specific implementation of an I 2 C bus, a multi-d[...]

42 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP The following 20-pin P ANEL illustration is for items 14-19. 14) System Power LED Lead (3-1 pin PWR.LED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power , and blinks when the system is in sleep or soft-of f mo[...]

ASUS CUV266-DLS User ’ s Manual 43 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.9 Starting Up the First T ime 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are of f (in some systems, marked with ). 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the[...]

44 ASUS CUV266-DLS User ’ s Manual 3. HARDW ARE SETUP Connectors 3. H/W SETUP Powering Up 3. H/W SETUP NOTES[...]

ASUS CUV266-DLS User ’ s Manual 45 4. BIOS SETUP 4. BIOS SETUP 4.1 Managing and Updating Y our BIOS 4.1.1 Upon First Use of the Computer System It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later . AFLA[...]

ASUS CUV266-DLS User ’ s Manual 46 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 5. Select 1. Save Curr ent BIOS to File from the Main menu and press <Enter>. The Save Curr ent BIOS T o File screen appears. 6. T ype a filename and the path, for example, A:XXX-XX.XXX and then press <Enter>.[...]

ASUS CUV266-DLS User ’ s Manual 47 4. BIOS SETUP 4. BIOS SETUP 4.1.2 Updating BIOS Procedures 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONT ACT INFORMA TION on page 3 for details) and save to the boot floppy disk you created earlier . 2. Boot from the floppy disk. 3. At the “ A: ” prompt, type AFLASH and[...]

ASUS CUV266-DLS User ’ s Manual 48 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 7. The utility starts to program the new BIOS information into the Flash ROM. The boot block is updated automatically only when necessary . This minimizes the possibilities of boot problems in case of update failures. When the programming is done, Flashed Successfully ap[...]

ASUS CUV266-DLS User ’ s Manual 49 4. BIOS SETUP 4. BIOS SETUP 4.2 BIOS Setup Program This motherboard supports a programmable EEPROM that you can update using the provided utility described in 4.1 Managing and Updating Y our BIOS . The utility is used if you are installing a motherboard, reconfiguring your system, or prompted to “ Run Setup ?[...]

ASUS CUV266-DLS User ’ s Manual 50 4. BIOS SETUP 4. BIOS SETUP 4.2.1 BIOS Menu Bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features. POWER Use this menu to configure and enable Power [...]

ASUS CUV266-DLS User ’ s Manual 51 4. BIOS SETUP 4. BIOS SETUP General Help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination. The General Help screen lists the legend keys wit[...]

ASUS CUV266-DLS User ’ s Manual 52 4. BIOS SETUP 4. BIOS SETUP System Time [XX:XX:XX] Sets the system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59) . Use the <T ab> or <Shift> + <T [...]

ASUS CUV266-DLS User ’ s Manual 53 4. BIOS SETUP 4. BIOS SETUP 4.3.1 Primary & Secondary Master/Slave Master/Slave Drives Type [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detect[...]

ASUS CUV266-DLS User ’ s Manual 54 4. BIOS SETUP 4. BIOS SETUP Master/Slave Drives Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or on the drive label for this information. NOTE: After entering the IDE hard disk drive information into BIOS, use a disk utility , such as FDISK, t[...]

ASUS CUV266-DLS User ’ s Manual 55 4. BIOS SETUP 4. BIOS SETUP Master/Slave Drives Head This field configures the number of read/write heads. Refer to the drive documentation to determine the correct value to enter into this field. NOTE: T o make changes to this field, set the T ype field to [User T ype HDD] and the T ranslation Method field to [[...]

ASUS CUV266-DLS User ’ s Manual 56 4. BIOS SETUP 4. BIOS SETUP Keyboard Features Boot Up NumLock Status [On] This field enables users to activate the Number Lock function upon system boot. Configuration options: [Off] [On] Keyboard Auto-Repeat Rate [12/Sec] This controls the speed at which the system registers repeated keystrokes. Options range f[...]

ASUS CUV266-DLS User ’ s Manual 57 4. BIOS SETUP 4. BIOS SETUP Main Menu Language [English] This field displays the BIOS language version. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set passwords. T o set a password, highlight the appropriate field and press <Enter>. T ype in a password then press &l[...]

ASUS CUV266-DLS User ’ s Manual 58 4. BIOS SETUP 4. BIOS SETUP 4.4 Advanced Menu Advanced Menu CPU Internal Frequency In JumperFree ™ Mode, this field allows you to select the internal frequency of your CPU. Select [Manual] if you want to make changes to the subsequent 2 fields. Note that selecting a frequency higher than what the CPU manufactu[...]

ASUS CUV266-DLS User ’ s Manual 59 4. BIOS SETUP 4. BIOS SETUP Advanced Menu BIOS Update [Enabled] This field functions as an update loader integrated into the BIOS to supply the processor with the required data. When set to [Enabled], the BIOS loads the update on all processors during system bootup. Configuration options: [Disabled] [Enabled] PS[...]

ASUS CUV266-DLS User ’ s Manual 60 4. BIOS SETUP 4. BIOS SETUP Chip configuration 4.4.1 Chip Configuration SDRAM Configuration [By SPD] This sets the optimal timings for items 2 – 5, depending on the memory modules that you are using. The default setting is [By SPD], which configures items 2 – 5 by reading the contents in the SPD (Serial Pres[...]

ASUS CUV266-DLS User ’ s Manual 61 4. BIOS SETUP 4. BIOS SETUP Chip Configuration Bank Interleave [Auto] Configuration options: [None] [2 Banks] [4 Banks] [Auto] DDR_1T/2T_ITEM [2T CMD] Configuration options: [1T CMD] [2T CMD] [Auto Mode] SDRAM Data Integrity Mode [Non-ECC] This function allows you to select whether your DIMM modules support the [...]

ASUS CUV266-DLS User ’ s Manual 62 4. BIOS SETUP 4. BIOS SETUP Chip Configuration Video Memory Cache Mode [UC] USWC (uncacheable, speculative write combining) is a new cache technology for the video memory of the processor . It can greatly improve the display speed by caching the display data. Y ou must set this to UC (uncacheable) if your displa[...]

ASUS CUV266-DLS User ’ s Manual 63 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Onboard FDC Swap A & B [No Swap] This field allows you to reverse the hardware drive letter assignments of your floppy disk drives. Configuration options: [No Swap] [Swap AB] Floppy Disk Access Control [R/W] When set to [Read Only], this parameter protects files [...]

ASUS CUV266-DLS User ’ s Manual 64 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Onboard Parallel Port [378H/IRQ7] This field sets the address of the onboard parallel port connector . If you disable this field, the Parallel Port Mode and ECP DMA Select configurations are not available. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5] Par[...]

ASUS CUV266-DLS User ’ s Manual 65 4. BIOS SETUP 4. BIOS SETUP PCI Configuration Slot 1/5, Slot 2, Slot 3, Slot 4 IRQ [Auto] These fields automatically assign the IRQ for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ assignments. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10[...]

ASUS CUV266-DLS User ’ s Manual 66 4. BIOS SETUP 4. BIOS SETUP IRQ XX Used By ISA [No/ICU] These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT r[...]

ASUS CUV266-DLS User ’ s Manual 67 4. BIOS SETUP 4. BIOS SETUP Power Menu 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity . Power Management [User Defined] This field must be enabled to activate the automatic power saving featu[...]

ASUS CUV266-DLS User ’ s Manual 68 4. BIOS SETUP 4. BIOS SETUP Video Off Option [Suspend -> Off ] This field determines when to activate the video of f feature for monitor power management. Configuration options: [Always On] [Suspend -> Of f] Video Off Method [DPMS OFF] This field defines the video off features. The DPMS (Display Power Mana[...]

ASUS CUV266-DLS User ’ s Manual 69 4. BIOS SETUP 4. BIOS SETUP AC PWR Loss Restart [Disabled] This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system off and [Enabled] reboots your system. [Previous State] sets your system back to the state it is before the power interrupti[...]

ASUS CUV266-DLS User ’ s Manual 70 4. BIOS SETUP 4. BIOS SETUP Automatic Power Up [Disabled] This allows an unattended or automatic system power up. Y ou may configure your system to power up at a certain time of the day by selecting [Everyday] or at a certain time and day by selecting [By Date]. Configuration options: [Disabled] [Everyday] [By D[...]

ASUS CUV266-DLS User ’ s Manual 71 4. BIOS SETUP 4. BIOS SETUP Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices. Promotion or demotion [...]

ASUS CUV266-DLS User ’ s Manual 72 4. BIOS SETUP 4. BIOS SETUP Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Y es] is selected, interrupts may be reassigned by the OS. When a non-PnP OS is installed or you want to prevent reassigning of [...]

ASUS CUV266-DLS User ’ s Manual 73 4. BIOS SETUP 4. BIOS SETUP 4.7 Exit Menu When you have made all of your selections from the various menus in the Setup program, save your changes and exit Setup. Select Exit from the menu bar to display the following menu: Exit Saving Changes Once you are finished making your selections, choose this option from[...]

ASUS CUV266-DLS User ’ s Manual 74 4. BIOS SETUP 4. BIOS SETUP Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [Y es] to load default values. Select Exit Saving Changes or make other ch[...]

75 5. SOFTW ARE SETUP ASUS CUV266-DLS User ’ s Manual 5. SOFTW ARE SETUP 5.1 Operating Systems Y ou should always use the latest operating system and updates when using new hardware to ensure full compliance. Y ou may use any version of W indows 98/2000/ ME. However , for W indows 95, you must use OSR 2.0 or later . For W indows NT 4.0, you must [...]

76 5. SOFTW ARE SETUP ASUS CUV266-DLS User ’ s Manual 5.2.2 Applications 5. S/W SETUP Support CD • VIA 4 in 1 Drivers: Installs VIA 4 in 1 Drivers that automatically detect and install the Bus Master PCI IDE Driver , VIA AGP Driver , VIA INF Driver , and IRQ Routing Driver . • Intel 82559 LAN Chip Driver: Installs the Intel 82559 network driv[...]

77 5. SOFTW ARE SETUP ASUS CUV266-DLS User ’ s Manual 5. S/W SETUP Support CD • Cyberlink V ideo and Audio Applications: Installs the Cyberlink PowerPlayer SE 5.0, and Cyberlink V ideoLive Mail 3.10. • ASUS Screen Saver: Installs the ASUS screen saver . NOTE: The following items are on the second menu screen. T o see the items, click on the a[...]

78 5. SOFTW ARE SETUP ASUS CUV266-DLS User ’ s Manual NOTES[...]

ASUS CUV266-DLS User ’ s Manual 79 6. SOFTW ARE REFERENCE 6. S/W REFERENCE ASUS PC Probe 6.1 ASUS PC Probe ASUS PC Probe is a convenient utility to continuously monitor your computer system ’ s vital components, such as fan rotations, voltages, and temperatures. It also has a utility that lets you review useful information about your computer ,[...]

ASUS CUV266-DLS User ’ s Manual 80 6. SOFTW ARE REFERENCE 6. S/W REFERENCE ASUS PC Probe 6.1.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. T emperature Monitor Shows the PC temperature (for supported processors only). T emperature Warning threshold adjustment (Move the slider up to increase the thr[...]

ASUS CUV266-DLS User ’ s Manual 81 6. SOFTW ARE REFERENCE 6. S/W REFERENCE ASUS PC Probe Settings Lets you set threshold levels and polling intervals or refresh times of the PC ’ s temperature, fan rotation, and voltages. History Lets you record the monitoring activity of a certain component of your PC for future reference. Information Hard Dri[...]

ASUS CUV266-DLS User ’ s Manual 82 6. SOFTW ARE REFERENCE Device Summary Shows a summary of devices present in your PC. DMI Explorer Shows information pertinent to the PC, such as CPU type, CPU speed, and internal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules. T o run a program, click Execu[...]

ASUS CUV266-DLS User ’ s Manual 83 6. SOFTW ARE REFERENCE 6.1.3 ASUS PC Probe T ask Bar Icon Right clicking the P C Probe icon brings up a menu to open or exit ASUS PC Probe a n d pause or resume all system monitoring. When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps, an[...]

ASUS CUV266-DLS User ’ s Manual 84 6. SOFTW ARE REFERENCE NOTES[...]

ASUS CUV266-DLS User ’ s Manual 85 7. APPENDIX Glossary 7. APPENDIX 7.1 Glossary 1394 1394 is the IEEE designation for the high performance serial bus at 12.5, 25 or 50MBytes/sec speeds. This serial bus defines both a back plane physical layer and a point-to-point cable-connected virtual bus. The primary application of the cable ver- sion is the [...]

ASUS CUV266-DLS User ’ s Manual 86 7. APPENDIX 7. APPENDIX Glossary Boot Boot means to start the computer operating system by loading it into system memory . When the manual instructs you to “ boot ” your system (or computer), it means to turn ON your computer . “ Reboot ” means to restart your computer . When using W in- dows 95 or later[...]

ASUS CUV266-DLS User ’ s Manual 87 7. APPENDIX Glossary 7. APPENDIX LPT Port (Line Printer Port) Logical device name reserved by DOS for the computer parallel ports. Each LPT port is configured to use a different IRQ and address assignment. MMX A set of 57 new instructions based on a technique called Single Instruction, Multiple Data (SIMD), whic[...]

ASUS CUV266-DLS User ’ s Manual 88 7. APPENDIX 7. APPENDIX Glossary ROM (Read Only Memory) ROM is nonvolatile memory used to store permanent programs (called firmware) used in certain computer components. Flash ROM (or EEPROM) can be repro- grammed with new programs (or BIOS). SCSI (Small Computer System Interface) High speed multi-threaded I/O i[...]

ASUS CUV266-DLS User ’ s Manual 89 INDEX A Accelerated Graphics Port 9 AGP Capability 61 AGP Pro Slot 29 Accessories CIDB Intrusion Detection Module. See also Leads: Chassis Intrusion Alarm AGP . See Accelerated Graphics Port ASUS PC Probe 79 Starting 79 T ask Bar Icon 83 Using 79, 80 A T API CD-ROM 71 Automatic Power Up 70 B BIOS Advanced Menu 5[...]

90 ASUS CUV266-DLS User ’ s Manual INDEX Expansion Slots 9 F Floppy 3 Mode 52 Floppy Disk Drive Connector 33 H Hard Disk Drives (HDDs) CHS Capacity 55 Cylinders 54 Heads 55 LBA Capacity 55 Primary/Secondary Master 53 Primary/Secondary Slave 53 Sectors 55 T ranslation Method 54 T ypes 53 Hardware Monitor 70 Hardware Setup Procedure 16 Headers USB [...]

ASUS CUV266-DLS User ’ s Manual 91 INDEX Processor 8 PS/2 Keyboard 31 PS/2 Mouse 31 Function Control 59 R R TC RAM Clearing 20 S SDRAM Active to Prechar ge T ime 60 CAS Latency 60 Configuration 60 RAS Prechar ge T ime 60 RAS to CAS Delay 60 Read Around W rite 60 Serial Ports 63 Connectors 32 SMAR T Monitoring 55 SMBus Connector 38, 41 Support CD [...]

92 ASUS CUV266-DLS User ’ s Manual INDEX NOTES[...]