Asus V2-PE2 manual

V-Series V2-PE2 ASUS PC (Desktop B ar ebone)[...]

i i Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without [...]

iii Table of contents Notices ................................................................................................ vi Safety information ..............................................................................vii About this guide ................................................................................. viii System package [...]

i v Table of contents Chapter 3: Starting up 3.1 Installing an operating system .............................................. 3-2 3.2 Powering up .......................................................................... 3-2 3.3 Support CD information ........................................................ 3-2 3.3.1 Running the support CD .......[...]

v Table of contents 5.2.4 Menu items ........................................................... 5-13 5.2.5 Sub-menu items .................................................... 5-13 5.2.6 Conguration elds ............................................... 5-13 5.2.7 Pop-up window ...................................................... 5-14 5.2.8 G[...]

v i Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has [...]

vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. • If the power supply is [...]

viii About this guide Audience This guide provides general information and installation instructions about the ASUS Vintage V-Series V2-PE2 barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How this guide is organized This guide contains the following parts: 1. Chapter 1: Sy[...]

i x Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to fi[...]

x System package contents Check your Vintage V2-PE2 system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item description 1. ASUS Vintage V2-PE2 barebone system with • ASUS motherboard • 300 W PFC power supply unit • ASUS chassis 2. Cable • AC power cable 3. Support CD 4. User[...]

Chapter 1 System introduction This chapter gives a general description of the ASUS Vintage V2-PE2. The chapter lists the system features including introduction on the front and rear panel, and internal components.[...]

1-2 Chapter 1: System introduction 1.1 Welcome! Thank you for choosing the ASUS Vintage V2-PE2! The ASUS Vintage V2-PE2 is an all-in-one barebone system with a versatile home entertainment feature. The system comes in a stylish casing and powered by the ASUS motherboard that supports the Intel ® Pentium ® D, Intel ® Pentium ® 4 or Intel ® Cele[...]

1-3 ASUS Vintage V2-PE2 1. Two empty 5.25-inch bays. These bays are for IDE optical drives. 2. 3.5-inch drive bays. These slots are for 3.5-inch oppy or hard disk drives. 3. Power button. Press this button to turn the system on. 4. Reset button. Press this button to reboot the system without turning off the power. 5. HDD LED. This LED lights up [...]

1-4 Chapter 1: System introduction eSATA 1.3 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 1. Power connector. This connector is for the power cable and plug. 2. Voltage selector. This switch allows you to adjust the system input voltage according to the voltage supp[...]

1-5 ASUS Vintage V2-PE2 6. Parallel port. This 25-pin port connects a printer, scanner, or other devices. 7. VGA port. This port connects a VGA monitor. 8. USB 2.0 ports 1, 2, 3 and 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 9. Microphone port (pink). This port connects a microphone. 10. Line Out p[...]

1-6 Chapter 1: System introduction Voltage selector The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127 V, set this switch to 115 V. If the voltage supply in you[...]

1-7 ASUS Vintage V2-PE2 1.4 Internal components The illustration below is the internal view of the system when you remove the top cover and the power supply unit. The installed components are labeled for your reference. Proceed to Chapter 2 for instructions on installing additional system components. 1 . Front panel cover 2. 5.25-inch optical drive[...]

1-8 Chapter 1: System introduction[...]

Chapter 2 Basic installation This chapter provides step-by-step instructions on how to install components in the system.[...]

2-2 Chapter 2: Basic installation 2.1 Preparation Before you proceed, make sure that you have all the components you plan to install in the system. Basic components to install 1. Central Processing Unit (CPU) 2. DDR2 Dual Inline Memory Module (DIMM) 3. Expansion card(s) 4. Hard disk drive 5. Optical drive 6. Floppy disk drive Tool Phillips (cross) [...]

2-3 ASUS Vintage V2-PE2 2.3 Removing the side cover and front panel assembly 1. Remove the cover screws on the rear panel. 2. Pull the side cover toward the rear panel until its hooks disengage from the chassis tab holes. Set the side cover aside. 3. Locate the front panel assembly hooks, then lift them until they disengage from the chassis. 4. Swi[...]

2-4 Chapter 2: Basic installation 2.4 Central Processing Unit (CPU) 2.4.1 Overview The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Pentium ® 4 processor in the 775-land package. • Your boxed Intel ® Pentium ® 4 LGA775 processor package should come with installation instructions for the CPU, heatsink, and the [...]

2-5 ASUS Vintage V2-PE2 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forenger to a 100º angle (4A), then push the PnP cap from the load plate window to remove (4B). 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the sock[...]

2-6 Chapter 2: Basic installation 7. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. 6. Apply Thermal Interface Material on the CPU before closing the load plate. A B DO NOT eat the Thermal Interface Material. If it gets into your eyes or touches your skin, make sure to wash it off immediately, and seek[...]

2-7 ASUS Vintage V2-PE2 If you purchased a separate CPU heatsink and fan assembly, make sure that the Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly. To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four fasteners [...]

2-8 Chapter 2: Basic installation 2.5 Installing a DIMM The system motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Module (DIMM) sockets. The following gure illustrates the location of the sockets: • Install only identical (the same type and size) DDR2 memory modules. • Install only ASUS-certied memory modules. Ref[...]

2-9 ASUS Vintage V2-PE2 256 MB KINGSTON KVR533D2N4/256 N/A N/A SS E5116AB-5C-E • • 512 MB KINGSTON KVR533D2N4/512 N/A N/A DS HY5PS56821F-C4 • • 1024 MB KINGSTON KVR533D2N4/1G N/A N/A DS D6408TE7BL-37 • • 20 48 MB KINGSTON KV R533 D2N 4/2G N/A N/A DS E1108AA-5C-E • 256 MB SAMSUNG M378T3253FG0-CD5 N/A N/A SS K4T56083QF-GCD5 • • 512 [...]

2-10 Chapter 2: Basic installation 512 MB KINGSTON KVR667D2N5/512 N/A N/A SS E5108AE-6E-E • • 1024 MB KINGSTON KVR667D2N5/1G N/A N/A DS E5108AE-6E-E • • 512 MB KINGSTON KVR667D2E5/512 N/A N/A SS E5108AE-6E-E • • 256 MB KINGSTON KVR667D2N5/256 N/A N/A SS HYB18T256800AF3 • • 256 MB SAMSUNG M378T3253FZ0-CE6 N/A N/A SS K4T56083QF-ZCE6 ?[...]

2-11 ASUS Vintage V2-PE2 2.5.3 Removing a DDR2 DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your ngers when pressing the retaining clips. The DIMM might get damaged when it ips out with extra force. 2.5.2 Inst[...]

2-12 Chapter 2: Basic installation 2.6 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.6.1 Installing an expansion card To install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and[...]

2-13 ASUS Vintage V2-PE2 * These IRQs are usually available for ISA or PCI devices. When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conicts will arise between the two PCI groups, making the system unstable and the card inoperable. Standard interrupt a[...]

2-14 Chapter 2: Basic installation 2.6.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. The gure shows a LAN card installed on a PCI slot. 2.6.3 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply w[...]

2-15 ASUS Vintage V2-PE2 2.7 Installing an optical drive Refer to the instructions in this section if you wish to install a new optical drive. Follow these steps to install an optical drive: 1. Place the chassis upright. 2. Remove the drive slot metal plate cover. 3. Insert the optical drive into the upper 5.25-inch drive bay and carefully push the[...]

2-16 Chapter 2: Basic installation 7. Connect the other end of the IDE ribbon cable to the secondary IDE connector (labeled SEC_IDE) on the motherboard. See page 4-7 for the location of this connector. 8. Remove the dummy drive slot cover from the front panel. 9. Replace the front panel.[...]

2-17 ASUS Vintage V2-PE2 2.8 Installing a hard disk drive The system may have one pre-installed 3.5-inch Serial ATA or IDE hard disk drive. Refer to this section to install additional Serial ATA or IDE hard disk drive(s). To install a Serial ATA hard disk drive: 4. Secure the drive with two screws on both sides. 4 4 3 1. Place the chassis upright. [...]

2-18 Chapter 2: Basic installation If your Serial ATA HDD has both 4-pin and 15-pin connectors at the back, use either the 15-pin SATA power adapter plug OR the legacy 4-pin power connector. DO NOT use both to prevent damage to components and to keep the system from becoming unstable. 5. Connect one end of the Serial ATA cable to the SATA connector[...]

2-19 ASUS Vintage V2-PE2 To install an IDE hard disk drive: 1. Follow steps 1-4 of the previous section. 2. Connect the blue interface of the IDE ribbon cable to the primary IDE connector (blue connector labeled PRI_IDE) on the motherboard. See page 4-7 for the location of the connector. • If you will install only one hard disk drive, make sure t[...]

2-20 Chapter 2: Basic installation 2.9 Installingaoppydiskdrive The Vintage2-PE2 system comes with one 3.25-inch drive bay for a oppy disk drive. To install a oppy disk drive: 1. Remove the front panel cover. 2. Carefully insert the oppy disk drive into the oppy drive bay until the screw holes align with the holes on t[...]

2-21 ASUS Vintage V2-PE2 2.10 Re-connecting cables You may have disconnected some cables when you were installing components. You must re-connect these cables before you replace the chassis cover. LED cables Connect the reset button, power switch, power LED, and HDD LED cables to their respective leads in the system panel connector on the motherboa[...]

2-22 Chapter 2: Basic installation 2.11 Removing the bay covers and reinstalling the front panel assembly and side cover If you installed an optical and/or oppy disk drive, remove the bay cover(s) on the front panel assembly before reinstalling it to the chassis. To do this: 1. Locate the bay cover locks. 2. Press the locks outward to release th[...]

Chapter 3 Starting up This chapter helps you power up the system and install drivers and utilities from the support CD.[...]

3-2 Chapter 3: Starting up 3.1 Installing an operating system The barebone system supports Windows ® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. 3.3 Support CD information The support CD that came with the system contains useful software and sever[...]

3-3 ASUS Vintage V2-PE2 3.3.1 Running the support CD To begin using the support CD, place the CD in your optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the le ASSETUP.EXE from the BIN folder. Double-c[...]

3-4 Chapter 3: Starting up 3.3.2 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities I n st al ls t he A SU S In st Al l- In st al la ti on W iz ar d U ti li ti es . ASUS PC Probe II T hi s s m ar t u t i li ty m o ni to r s t he f a n sp e e d , C[...]

3-5 ASUS Vintage V2-PE2 3.2.3 Make Disk VIA RAID Driver Disk I n st al ls t he V IA R AI D Dr iv er D is k Make JMicron JMB36X 32/64bit RAID Driver I n st al ls t he M ak e JM ic ro n JM B3 6 X 32 / 64 b it R AI D Dr iv er . 3.3.4 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this informa[...]

3-6 Chapter 3: Starting up 3.4 Software information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software for more information. ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components and al[...]

3-7 ASUS Vintage V2-PE2 Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory, CPU usage window Shows/Hides the Preference section Minimizes the appl[...]

3-8 Chapter 3: Starting up Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small). When you check the Enable Monitoring Panel option from the Preference secti[...]

3-9 ASUS Vintage V2-PE2 Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below. Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser. This browser displays various Windows ® management informat[...]

3-10 Chapter 3: Starting up PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard[...]

3-11 ASUS Vintage V2-PE2 Memory usage The Memory tab shows both used and available physical memory. The pie chart at the bottom of the window represents the used (blue) and the available physical memory. Configuring PC Probe II Click to view and adjust the sensor threshold values. The Cong window has two tabs: Sensor/Threshold and Preference. Th[...]

Chapter 4 Motherboard introduction This chapter gives information about he motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations.[...]

4-2 Chapter 4: Motherboard info 4.1 Introduction The Vintage V2-PE2 barebone system comes with an ASUS motherboard. This chapter provides technical information about the motherboard for future upgrades or system reconguration. 4.2 Motherboard layout LGA775 DDR2 DIMM1 (128 bit,240-pin module) DDR2 DIMM2 (128 bit,240-pin module) VIA P4M890 VIA 823[...]

4-3 ASUS Vintage V2-PE2 4.3 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in the CMOS, which includes the system setup information su[...]

4-4 Chapter 4: Motherboard info 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, U S B P W 7 8 ) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow[...]

4-5 ASUS Vintage V2-PE2 3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5[...]

4-6 Chapter 4: Motherboard info 4.4 Connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is removed to preven[...]

4-7 ASUS Vintage V2-PE2 3 IDE connectors (40-1 pin PRI_IDE, SEC_IDE) The onboard IDE connectors are for Ultra DMA 133/100/66 signal cable(s). There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to congu[...]

4-8 Chapter 4: Motherboard info Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 5. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB[...]

4-9 ASUS Vintage V2-PE2 6. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The plugs from the power supply are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. R ATX Power Connector +3 V olts +3 V ol[...]

4-10 Chapter 4: Motherboard info 8. Front panel audio connector (10-1 pin AAFP) Th is con nec tor is fo r a ch ass is- mou nte d f ron t p ane l a udi o I /O mod ule th at sup por ts eit her HD Au dio or le gac y A C’9 7 a udi o s tan dar d. We recommend that you connect a high-denition front panel audio module to this connector to avail of th[...]

4-11 ASUS Vintage V2-PE2 10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is rem[...]

4-12 Chapter 4: Motherboard info 12. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. The sytem panel connector is color-coded for easy connection. Refer to the connector description below for details. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the ch[...]

1 Chapter 5 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters.[...]

5-2 Chapter 5: BIOS setup 5.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment) 2. ASUS EZ Flash (Updates the BIOS during the Power-On Self Test) 3. Award BIOS Flash Utility (Updates the BIOS in DO[...]

5-3 ASUS Vintage V2-PE2 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS[...]

5-4 Chapter 5: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, then[...]

5-5 ASUS Vintage V2-PE2 5.1.2 Creating a bootable floppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>. Windows ® XP environment a. Insert a 1.44 MB oppy disk to the oppy disk drive. b.[...]

5-6 Chapter 5: BIOS setup 3. Press <Alt> + <F2> during POST, the following screen appears: 5.1.3 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is[...]

5-7 ASUS Vintage V2-PE2 5.1.4 AwardBIOS Flash Utility The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS le from the ASUS web site. Rename the le to P5VD2MX.BIN and save it to a oppy disk. Save only the updated B[...]

5-8 Chapter 5: BIOS setup 7. Press <N> when the utility prompts you to save the current BIOS le. The following screen appears. 8. The utility veries the BIOS le in the oppy disk and starts ashing the BIOS le. Do not turn off or reset the system during the ashing process! AwardBIOS Flash Utility for ASUS V1.17 (C) Phoenix [...]

5-9 ASUS Vintage V2-PE2 4. The utility saves the current BIOS le to the oppy disk, then returns to the BIOS ashing process. 3. Type a lename for the current BIOS le in the Save current BIOS as eld, then press <Enter>. To save the current BIOS le using the AwardBIOS Flash Utility: 1. Follow steps 1 to 6 of the previous sec[...]

5-10 Chapter 5: BIOS setup 5.1.6 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. You can update a corrupted BIOS le using the motherboard support CD or the oppy disk that contains the updated BIOS le. Prep[...]

5-11 ASUS Vintage V2-PE2 5.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to“Run Setup.” [...]

5-12 Chapter 5: BIOS setup 5.2.1 BIOS menu screen Select Menu Item Specic Help Change the day, month, year and century. Legend bar General help Menu bar Sub-menu items Configuration fields Menu items Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Exit F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →[...]

5-13 ASUS Vintage V2-PE2 5.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. 5.2.5 Sub-menu items A solid triangle before each item on any menu scree[...]

5-14 Chapter 5: BIOS setup System Time 15 : 30 : 36 System Date Thu, Apr 6 2006 Legacy Diskette A: [1.44M, 3.5 in.] Primary IDE Master [None] Primary IDE Slave [None] Secondary IDE Master [None] Secondary IDE Slave [None] First SATA Master [None] Second SATA Master [None] HDD SMART Monitoring [Disabled] Installed Memory 512MB Usable Memory 447MB 5.[...]

5-15 ASUS Vintage V2-PE2 F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Exit Select Menu Item Specic Help Change the day, month, year and century. System Time 15 : 30 : 36 System Date Thu, Apr [...]

5-16 Chapter 5: BIOS setup 5.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. The BIOS automatically detects the values opposite the dimmed items (Capaci[...]

5-17 ASUS Vintage V2-PE2 Capacity Displays the auto-detected hard disk capacity. This item is not congurable. Cylinder Shows the number of the hard disk cylinders. This item is not congurable. Head Shows the number of the hard disk read/write heads. This item is not congurable. Sector Shows the number of sectors per track. This item is not[...]

5-18 Chapter 5: BIOS setup 5 . 3 . 6 F i r s t / S e c o n d S A T A M a s t e r While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information. The BIOS automatically detects the values o[...]

5-19 ASUS Vintage V2-PE2 Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Adjust system frequency/ voltage. CPU Conguration Chipset PCIPnP Onboard Device Conguration USB Conguration 5.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other syste[...]

5-20 Chapter 5: BIOS setup 5.4.1 CPU Configuration Select Menu Item Specic Help DRAM timing and control. CPU Conguration CPU Type Intel Genuine Processor CPU Speed 3.80GHz Cache RAM 2048K Current FSB Frequency 200MHz Delay Prior to Thermal [4 Min] Thermal Management [TM 1] TM2 Bus Ratio 14 X TM2 Bus VID 0.8375V Limit CPUID MaxVal [Disabled] E[...]

5-21 ASUS Vintage V2-PE2 5.4.2 Chipset F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select Sub-menu F10: Save and Exit Select Menu Item Specic Help Chipset DRAM Clock/Drive Control Frequency/Voltage control Top Performance [Disabled] Primary Display Adapter [PCI-E] VGA Share Memory Size [...]

5-22 Chapter 5: BIOS setup Frequency/voltage control F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select Sub-menu F10: Save and Exit Select Menu Item Specic Help Frequency/Voltage control CPU Clock Ratio [19 X] Async CPU/PCIE Clock [Sync Mode] CPU Clock [200MHz] Spread Spectrum [Disabled[...]

5-23 ASUS Vintage V2-PE2 Select Menu Item Specic Help PCIPnP Plug & Play O/S [No] Resources Controlled By [Auto] x IRQ Resources Assign IRQ For VGA [Enabled] ** PCI Express relative items ** Maximum Payload Size [4096] Phoenix-Award BIOS CMOS Setup Utility Advanced 5 . 4 . 3 P C I P n P Plug & Play O/S [No] When set to [No], the BIOS con[...]

5-24 Chapter 5: BIOS setup JMicron RAID controller [IDE] Allows you to disable JMicron RAID controller or sets to IDE/RAID mode. Conguration options: [Disabled] [IDE] [RAID] SATA Controller [Enabled] Enable/Disable Onchip SATA. Conguration options: [Disabled] [Enabled] SATA Controller Mode [IDE] Select SATA mode. Conguration options: [IDE][...]

5-25 ASUS Vintage V2-PE2 Select Menu Item Specic Help Enable or Disable the USB Controller. USB Conguration USB Controller [Enabled] USB2.0 Controller [Enabled] USB Legacy support [Enabled] Phoenix-Award BIOS CMOS Setup Utility Advanced The items in this menu allows you to change the USB-related features. Select an item then press <Enter&g[...]

5-26 Chapter 5: BIOS setup 5.5 Power menu The Power menu items allow you to change the settings for the Advanced Conguration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 5.5.1 ACPI Suspend Type [S1&S3] Allows you to select the Advanced Con?[...]

5-27 ASUS Vintage V2-PE2 5.5.3 APM Configuration Select Menu Item Specic Help APM Conguration Power Up By PS/2 Mouse [Disabled] Power Up By PS/2 Keyboard [Disabled] Power on By PCI Devices [Disabled] Power on By External Modem [Disabled] Power on By On-board LAN [Disabled] Power On By RTC Alarm [Disabled] x Date (of Month) Alarm 0 x Time (hh:[...]

5-28 Chapter 5: BIOS setup Restore on AC Power Loss [Power Off] Allows you to select to/not to restart the system after AC power loss. Conguration options: [Power Off] [Power On] [Last State] PWR Button < 4 secs [Instant-Off] When sets to [Instant-Off], the system will go to Soft-off instantly when power-button pressed for less than 4 seconds[...]

5-29 ASUS Vintage V2-PE2 5.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. Select an item then press <Enter> to display the conguration options. Select Menu Item Specic Help Press [Enter] to enable or disable. Hardware Monitor Q-Fan Controller [Enabled] Vcore Volta[...]

5-30 Chapter 5: BIOS setup 5.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Select Boot Device Priority Boot Device Priority Removable Drives Hard Di[...]

5-31 ASUS Vintage V2-PE2 5.6.2 Boot Settings Configuration F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select Sub-menu F10: Save and Exit Select Menu Item Specic Help Press [Enter] to enable or disable. Boot Settings Conguration Case Open Warning [Enabled] Quick Boot [Enabled] Boot U[...]

5-32 Chapter 5: BIOS setup OS Select for DRAM > 64MB [Non-OS2] Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB. Conguration options: [Non-OS2] [OS2] Full Screen LOGO [Enabled] Allows you to enable or disable the full screen logo display feature. Conguration options: [Di[...]

5-33 ASUS Vintage V2-PE2 2. Press any key to continue. The password eld setting is changed to Clear. A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access. The User password is required to boot the system preventing unauthorized use. Forgot your password? If you forget your pass[...]

5-34 Chapter 5: BIOS setup Exit & Save Changes Once you are nished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. An onboard backup battery sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this option, a conrmation window appear[...]