Axis P3367-V manual

USER MANUAL AXIS P3367–V Fixed Dome Network Camera[...]

About this document This manual is intended for adminis trators and users of AXIS P3367–V Fixed Dome Network Camera, and is applicable to fi rmware 5.40 and later. It in cludes instruction s fo r using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowle dge of UNIX or Li[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T able o f content s H a r d w a r e o v e r v i e w ....... ................... ................ 4 C o n n e c t o r s ............. .......... ............ ............. .... 4 L E Di n d i c a t o r s ........... .......... ............ ............. .... 6 A c c e s s i n g t h e p r o d u c t .... .[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a H a rd w a re ov e r vi ew Hardware overview 2 1 3 4 5 6 7 8 1 Part num ber (P /N) & Serial number (S/N) 2 SD card slot 3 Network connector (PoE) 4 Audio out 5 Network, Status and Power LED indicators 6 Audio in 7 I/O connector 8 Control button Connectors Network connector - RJ-45 Ethernet connector.[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a H a rd w a re ov e r vi ew I/O connector Note For technical speci fi cations, see page 50 . I/O terminal connector - Use in applications for e.g. m otion detection, event triggering, time lapse recording and alarm noti fi cations. In addition to an auxiliary power and a GND pin, the I/ O terminal conne[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a H a rd w a re ov e r vi ew LED indicators LED Color Indication Green Steady for connection to a 100 MBit/s ne twork. Flashes for network activity. Amber Steady for connection to a 10 MBit/s ne twork. Flashes for network activity. Network Unlit No network connection. Green Steady green for normal operatio[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a A ccessin g the pr oduct Accessing the product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers . The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox w ith ot[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a A ccessin g the pr oduct Access from the Internet Once connected, the Axis product is accessible on your local net work (LAN). To access the product from the Internet you m ust con fi gure your network router to allow incoming data traf fi c to the product. To do this, enable the NAT-traversal feature,[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a A ccessin g the pr oduct Con fi gure capt ure mode Capture mode de fi nes how image data is taken from the image sensor in regard to resolution and frame rate, prioritizing either one or the other. Capture mode is set the fi rst time the p roduct is a ccessed. Select the desir ed Capture Mode from the[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a A ccessin g the pr oduct Click the View Full Screen button and the vide o image will fi ll the entire screen. Press ESC (Escap e) on the computer keyboard to cancel full screen view. The Re cord button is used to record the current video stream. The loca tion wh er e the recording is saved can be speci [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a A ccessin g the pr oduct Pan and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. The PTZ controls can be [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Media str eams Media streams The Axis product provides several image and video stream form ats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motio n JPEG video streams, audio streams and to the list of[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Media str eams T h eA M CC o n t r o lP a n e lc a nb eu s e dt oc o n fi gure va rious video and audio settings. Pl ease see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on fi rst us e, after which it can be con fi gured. Open the AMC C[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Media str eams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths a bove, although Axis does not guarantee this. Accessing audio stream[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Settin g up the p r oduct Setting up the product The Axis product can be con fi gured by users with administrator or operator rights. Click Setup in the top right-hand corner of t h eL i v eV i e wp a g e . • Administrators have unrestricted access to all s ettings. • Operators have access to all se[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio Video and Audio The vide o and audio settings can be use d to optimize video and a udio quality. You can con fi gure the following: • Video strea m settings. See page 16 . •S t r e a m p r o fi les . See page 17 . • Camera setti ngs. See page 17 . •V i e w a r e a s . S e e pag[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio Image You can modify the image resolution and com pression, and rotate the image from the Ima ge tab ( Video & Audio > Video Stream ). Setting the compression level affects the image quality and bandwi dth; the lower the compression , the higher the image quality with higher bandw[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio Capture mode C a p t u r em o d ed e fi nes how image data i s taken from the ima ge senso r in regards to resolution and frame rate, prioritizing either one or the other. The capture mode is set the fi rst time the camera is accessed. See Con fi gure capture mode, on page 9 . To chan[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio • Auto to set the shutter speed automatically. If required, use Max shutter to limit the shutter speed to prevent the frame rate from being reduced. For example, to get 30 fps, set Max shutter to 1/30. • Fixed to use a fi xed shutter speed. Gain , measured in decibel (dB), is the am[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio 2. Click Add . 3. The new view area appears under Selected view area . Enter a descriptive name in the Name fi el d. 4. Select an Aspect ratio and a Video stream resolution . 5. A new view area covers the whole image. Us et h em o u s et om o v ea n dr e s i z et h ev i e wa r e a . 6. [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio 3. On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in either direction. The buttons << and >> mo ve the zoom position in multiple steps in either direction. 4. Click Perform auto focus to focus the camera auto m[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Video and A udio Audio Input An external microphone or a line s ource can be connected to the product’s Audio-in connector. Con fi gure the audio input settings under Video & Audio > Audio Settings . Source - Select Microphone for an external microphone or Line for a Line in device, e.g. an aud[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Live V ie w Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of t h eL i v eV i e wp a g e . •S t r e a m P r o fi le. See page 17 . • Default Viewer for Browser. See page 23 . • V iewer Se[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Live V ie w Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alternative to AMC. Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher • JRE (J2SE) 5.0 or higher Windows Inte[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a PTZ (P an Tilt Zoom) PTZ (Pan Tilt Zoom ) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in at least one vie w area . For more information on view areas, see View Areas, on page 19 . Preset positions A preset position is a prede fi ned view that can be used to quickly steer the[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a PTZ (P an Tilt Zoom) Guard Tour A guard tour displays the video stream from dif ferent preset posi tions, one-by-one , in a predetermi ned order or at random and for con fi gurable tim e periods. The enabled guard tour will keep running after the user has logge d off or closed the browser. T oa d dag u [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Detector s Detectors Camera Tampering Camera Tampering can generate an al arm whenever the came ra is repositioned, or when the lens is covered, sp rayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To con fi gure tampering: 1. Go to Detectors > Camera[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Detector s Set up motion detection To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection . 2. Select a des ire d resolution for viewing while setting up Motion Detection from the View in list. 3. Select the Con fi gure Included Windows option an[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Detector s Low level (0%) Even very small objects trigger motion detection. An object that appears in the window triggers motion detection only for a very short time before it is considered as non-moving. Only very bright objects on a dark background trigger motion detection. Recommended values 5–15% 6[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Applications Applications Third party applicatio ns can be upload ed to and installed on the Axis pro duct. For more information, go to www.axis.com/applications To upload an applicat ion, go to Applications > Packages , click Browse to locate the fi le and then click Upload Package . Click on the up[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Ev e n ts Events The A xis p roduct can be con fi gured to perform actions when di ffe rent events occur, for example, star t a recording whe n m otion i s detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule . The action rule will apply at sp eci[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Ev e n ts For more information, s ee the online help . Recipients Recipients receive image fi les and noti fi cation messages. A recipient can be an FTP, HTTP or TCP server, a network share or an e mail address. TCP servers are used for noti fi cation messages only. To add a recipient: 1. Go to Events[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a Re c o rd in g s Recordings T h eA x i sp r o d u c t c a nb ec o n fi gured to record video continuously or according to an action rule: • To start a continuous recording, see page 33 . • To set up action rules, see page 31 . • To access recordings, see Recording List, on page 33 . •T o c o n ?[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It i s also po ssible to allow anonymous viewer login, which mea[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control p roviding secure authentication of wired and wireless network devices. IEEE 802.1X is based on E AP (Extensible Authentication Protocol). To access a network protected by IEEE 802.1X, devices must auth enticate[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically. • Synchronize with N[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and s ecure Internet access to live and recorded video accessible from any location. For more information and help to fi nd a local AVHS Service Provider go to www.axis.com/hosting AVHS is enable[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options Link-Local IPv4 Address Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the loca l network. The product can have a Link-Local IP and a static or DHCP-supplied IP a[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other l ocations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options >[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options The following traps are av aila ble: •C o l d s t a r t •W a r m s t a r t •L i n k u p • Authenticatio n failed SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, see HT[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options For more information, see the online help . Network Share Network share allows you to add network sto rage such as a N AS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings. To add a network share: 1. Go to System Op[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options • the IEEE 802.1X settings Click Default to reset all settings, includ ing the IP address, to the f actory default values. This button should be used with caution. The Axis product can also be reset to factory d efault using the control button, see Reset to factory default settings, o n [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. Caution Improper use may cause unexpected behavior a nd loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless y ou understand the consequences. A[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a System Options 2. Press and hold the Control button and reconnect power (see Hardware overview, on page 4 ). 3. Keep the Control button pressed for about 15 seconds until the Status indicator fl ashes amber. 4. Release the Control button. The process is complete after about 1 minute (when the Status ind[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T r oubleshooting Troubleshooting Checking the fi rmware Firmware is software tha t determin es the functionali ty of network devices. One of your fi rst actions when troubleshooting a problem should be to check the current fi rmware version. The latest ver sion ma y contain a correction that fi xes [...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T r oubleshooting arp -s <IP address> <serial number> temp ping -s 408 <IP address> In Windows , type the following from a command/DOS prompt: arp -s <IP address> <serial number> ping -l 408 -t <IP address> 2. If the product does not reply within a few seconds, res tar[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T r oubleshooting The product is accessible locally but not externally Router con fi guration To con fi gure your router to allow incoming data traf fi c to the Axis product, enable the NAT-traversal feature which will attempt to automatically con fi gure the router to allow access to the A xis produ[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T r oubleshooting Status indicat or LED is fl ashing red and the product is inaccessible A fi rmware upgrade has been interrupted or the fi rmware has otherwise been damaged See Emergency recovery procedure, on p age 45 . No images displayed on web page Problems with AXIS Media Control ( Internet Expl[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T r oubleshooting Motion Detection triggers unexpectedly Changes in luminance Motion detection is based on changes in luminance in the image. This means that if there are sudden changes in the lighti n g, motion detection may trigger mistakenly. Lower the sensitivity setting to avoid problems with lumina[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T echnical Speci fi cations Technical Speci fi cations Function/group Item Speci fi cations Models AXIS P3367–V: 5 MP/HDTV 1080p, v andal-resistant, indoor Image sensor Progressive scan RGB CMOS 1/3.2'‘ Lens Varifocal w ith remote zoo m and focus, IR corrected, megapixel resolution 3 – 9 mm[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cations Audio streaming Two-way Audio compression A A CL C8k H z3 2k b i t / s , 1 6 k H z6 4k b i t / s G.711 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Con fi gurable bit rate Audio Audio input/output Built-in m icrophone, ex[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T echnical Speci fi cations Function/group Item Speci fi cations Casing Polycarbonate transparent cover Aluminum inner camera module with encapsulated electronics IK10 impact-resista nt aluminum casing Color: white NCS S 1002–B Processor, memory ARTPEC-4, 512 MB RAM, 128 MB Flash Battery backed-up re[...]

AXIS P3367–V F ix ed Dome Netw ork Camer a T echnical Speci fi cations • Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected. • Simultaneous viewing of different streams ( resolutio n, compression) by different cl ients. Effect on frame rate and bandwidth. • Acce ss ing Motion JPEG and H.264 video stream[...]

User M anual Ver. M2.2 AXIS P3367– V Fixed Dome Network Camera Date: Jul y 2011 © Axis Communicati ons AB, 2011 Part No. 43 972[...]