Barco IP-2003 manual

Manual# 26-0302000-00 / Re v E www.barco.com www.folsom.c om Folsom Barco Events USA 11101 Trade C enter Drive Rancho Cor dova , CA 95670 ImagePRO, ImagePRO-SDI, ImagePRO-HD Installation Manual Model IP-2003[...]

[...]

[...]

[...]

RECORD OF CHANGES REV # DA TE ECO # DESCRIPTION App ro ve d B y A 11/14/03 1171 Released A. Yerocostas B 12/15/03 1188 Updated Save system State description to include saving input channel ( s / w rev 1.01). Miscellaneous spelling corrections. Added Ethernet functionalit y. Added Save messages when exitin g inp ut, output and system menus. Released[...]

[...]

Operators Safety Summary The general safety information in th is summary is for operating pe rsonnel. Do Not Remove Co vers or Panels There are no user-serviceable parts within the unit. Remov al of the top cover will ex pose dangerous voltages. To avoid personal injury , do not remove the top cov er. Do not opera te the unit withou t the cover ins[...]

[...]

ImagePRO ™ Quick Start Guide Step 1: Connect Input Sources to ImagePRO ™ 1. Connect analog video source to the ImageP RO ™ using the three universal video inputs. 2. Connect any SDI video sourc e to the SDI video i np ut (ImagePRO-SDI ™ and ImagePRO-HD ™ only). 3. Connect DVI video source to the DVI video input (ImagePRO-HD ™ only). Ste[...]

search order: Last configuration saved for the selected input c hannel, One of 64 stored configurat ions, any custom formats stor ed by the user, library formats an d finally using a “b est guess” algorithm matching to the closest librar y format. While this approach ge nerally le ads to an acceptable output image, it is strongly recommended th[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor i Table of Contents IMAGEPRO ™ QUICK START GUIDE ____________________________________________________________________ I TABLE OF CONTENTS _________________________________________________________________________________ I CHAPTER ONE ___________________________________[...]

ii Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E S AMPLE P HASE _________________________________________________________________________________________ 31 A CTIVE A REA __________________________________________________________________________________________ 31 C ONTRAST A ND B RIGHTNESS _______________________[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor iii CHAPTER FOUR _____________________________________________________________________________________ 61 SERIAL COMMAND SYNTAX _________________________________________________________________________ 63 S ERIAL P ARAMETERS ______________________________________________[...]

iv Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 1 1 CHAPTER ONE Introduction What you will find in this chapter…  About ImagePRO TM  Features Model IP-2003 ImagePRO – Multi Format Image Processor[...]

2 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 3 ImagePRO TM Overview Description The Folsom ImagePRO ™ is a powerful all-in-one signal proc essor t hat accepts a wide range of video input signals and processes them into a number of differe nt output sig nal formats to meet the video requirements of virtually any a[...]

4 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E Additional ImagePRO-SDI ™ Features • One SD SDI input and output • Can be later upgraded to ImagePRO-HD • Motion adaptive de-interlacin g for HDTV inputs • Low Video Delay • Logo image capture and recal l feature • Dissolve to/from stored logo Additional[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 5 2 CHAPTER TWO INSTALLATION What you will find in this chapter…  Rear Panel Connectors  Rack-Mount Installation  Video Input & Output Connections  Remote Control Connections  Power Cord/Line Voltage Selection Model IP-2003 ImagePRO – Multi Format [...]

6 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 7 Installation ImagePRO ™ Rear Panel Connectors UNIVERSAL IN PUT 1 IN LOOP IN LOOP UNIVERSAL INPU T 2 H/C G/Y/COMPOSITE R/R-Y /C UNIVERSAL IN PUT 3 B/B-Y V IN IN IN IN IN LOOP H/C UNIVERSAL INPU T 3 G/Y/ COMPOSI TE R/R-Y /C B/B-Y V LOOP LOOP LOOP LOOP OUTPUT OUTPUT 1 S[...]

8 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / Revisio n E ImagePRO-SDI ™ Rear Panel Connectors UNIVERSA L INPUT 1 IN LOOP UNIVERS AL INPUT 2 H/C G/Y/COMPOSITE R/R-Y /C UNIVERSAL IN PUT 3 B/B-Y V IN IN IN IN IN LOOP H/C UNIVERSAL INPU T 3 G/Y/ COMPOSI TE R/ R-Y/C B/B-Y V LOOP LOOP LOOP LOOP SDI INPUT SDI OUTPUT OUTPUT OUTPU[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 9 ImagePRO-HD ™ Rear Panel Connectors RS-232 REMOTE CONT ROL H/C GENLOCK I N H/C/BURS T DVI-D OUTPUT OUTPUT 2 H/C V SDI OUTPUT OUTPUT COMPOSI TE SDI INPUT V G/Y/COMPOSITE B/B-Y UNIVERSAL IN PUT 3 R/R-Y /C UNIVERSAL IN PUT 1 H/C V ETHERNET B/B-Y G/Y/ COMPOSI TE OUTPUT 1[...]

10 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Rack-Mount Installation ImagePRO TM units are designed to be rack mounted an d are s upplied with front rack-mount hard ware. Rear rack- mount brackets are available as a kit and ar e recommended for use when units are mounted in transit cases. W hen rack mounting t[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 11 Video Input Connections Univer sal Input Conn ectors The video input section on the ImagePRO TM rear panel provides three universal inputs. Each in put can a ccept RGB, YUV, S-Video (Y/C), or composite (NTSC, PAL or SECAM) video signals. On ImagePRO ™ and ImagePRO-S[...]

12 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Video Output Connections Four independently buffered outputs (on e five wire B NC connection, one HD-15, one S-Video, and one Composite video BNC) are provided. Bot h 5-wire and HD-15 outputs provide the sam e Video in RGB or YPbPr format. Outputs are available depe[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 13 RGB/YPbPr Video Output Connect the output device to the set of BNC connectors marked R/R-Y, G/Y and B/B-Y on the output section of the ImagePRO ™ rear panel S-Video (Y/C) Video Output The Y/C video output connector is a 4-Pin Mi ni DI N located on the rear panel of [...]

14 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E DVI-I Video In and Loop-Through Connect ors (Universal Input 1-ImagePro-HD ™ ) Two DVI-I female connectors are locat ed on the rear panel of the ImagePRO-HD ™ . One is used for Video input and the other one is used for the buffered DVI-I Loop-Through. This Conne[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 15 RS-232 Remote Control Connections The Remote serial port can be connected to a PC or ot her Remote Contro ller to sup port remote control of the ImagePRO TM unit. Pinouts for the remote port are shown below. 1234 5 6789 DB-9 RS-232 Signal Description 1 CD Carrier Dete[...]

16 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Connection to AC Power Power Cord/Line Voltage Selection ImagePRO TM is rated to operate with the following supplies: Input Power: 100-240 VAC, 47-63 Hz Power Consumption : 150 watts maximum The ImagePRO TM Wide Screen Image Processor performs line vo ltage selectio[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 17 Connect ImagePRO TM to 115 VAC power using the power cord suppli ed with the unit. Locate the power switch on the power entry module at the rear of the unit and turn the po wer on. While the main bo ard is initializing, “please wait” will be displayed and the fron[...]

18 Image PRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 19 3 CHAPTER THREE Operation What you will find in this chapter…  Front Panel Controls  Status Display  Menu Control  Setup Menus  Input Setup Menu  Output Setup Menu  System Options Menu  Test Pattern Menu  Zoom Menu  Pan Menu Model IP-20[...]

20 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 21 Operation ImagePRO ™ can be controlled b y using the front pan el menu contro ls or remotely via RS-232 or Ethernet interface. The front panel menu controls are descri bed in detail in th is section. Remote control commands ar e described in detail in section 4. Ima[...]

22 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO-SDI ™ Front Panel Controls ADJUST H S E A R E R C LOGO ---------- BLACK ZOOM ESC PAN SEL MENU KEY S PAT SETUP TEST 3 2 1 INPUT S FREEZE SDI Figure 3-2 ImagePRO-SDI ™ Front Panel SEL Used to select a menu option, contro l setting, or configuration chan ge[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 23 ImagePRO-HD ™ Front Panel Controls ADJUST TEST SEL SETUP ESC PAN ZOOM PAT 1 2 3 LOGO ---------- BLACK MENU KEY S INPUT S FREEZE H S E A R E R C SDI Figure 3-3 ImagePRO-HD ™ Front Panel SEL Used to select a menu option, contro l setting, or configuration chan ge. E[...]

24 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E In addition to the twelve illuminated p ush b uttons, the Fr ont Panel controls also include a Vacuum Fluore scent Display (VFD) and an adjustment knob. The operation of each menu displ ayed on the VFD is described i n detail in the following sections of this docum e[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 25 For ImagePRO-SDI and ImagePRO-HD unit s, when there is a logo image stored in non-v olatile memory, the logo will be loaded into memory at this time. During th is loading process, the follo wing message will be displaye d on the VFD display: A progress bar will be dis[...]

26 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Status Display After power-up or anytime none of the four menu buttons are sele cted, the display will show a basic status. This screen gives information about the currentl y selected s ystem i nputs and outputs. The input se ction always reflects the currently selec[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 27 The user can scroll through the menu items b y turning the AD JUST control knob. A pointer (> ) at the left of a menu item indicates the current position of the scroll bar. When the desire d menu item is reached, the user pres ses the SEL key to select that menu it[...]

28 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Menu Operation Setup This is the top-level menu accessed by pr ess ing the SETUP button. Setup information can be stored i n non-volatile memory within ImagePRO TM and will be automatically recalled eac h time the unit is turned on. The contents of this menu are: Inp[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 29 <in_format> Indicates the current input video format in the form, Hact x Vact @ Vr Hz (i.e 1024x768@75 Hz). If the currently selected input channel and source do n ot have a valid input signal, the <in_format> field will display “Invalid S ignal”. When[...]

30 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The Color space value all o ws the user to select among th e possible Component Vide o Standards for YPbPr. For all other video types the color space is RGB and cann ot be sel ected or changed. The default selectio n for YPbPr is SMPTE. The user may change this setti[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 31 1:1 Sampling Overview In order to scale an image it must first be digitized. This is the process of changing the ana log graphics signals (Red, Green, and Blue for example) into pixels stor ed in the Ima gePRO TM image memory. The default mode of the ImagePRO TM is to[...]

32 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E raster box is i ntentionally “broke n” to allow the user to view the input v ideo behind it and a lign the input video to the raster box precisely. Contrast And Brightness The adjustment range is 75.0 % to 125.0%. 100% is the default setting for both contrast and[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 33 This menu allows the user to set the input signal aspect ratio. The menu is : The Mode value is selected am ong the fol lowing c hoices: 1:1, 3:2, 4: 3, 5:4, 16:9, Custom The ImagePRO will select and display the i nput video as pect ratio according to the in put forma[...]

34 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E De-interlacing In order to process an interlaced vid eo so urce, the ImageP RO circuits must first de-interlace the image. De- interlacing is the process by which interlac ed video (v ideo where ev en li nes are scanned during one fi eld and odd lines are scanned dur[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 35 NOTE: Configuration parameters entered in the input setup menu are saved in non-volatile memory for each input source by using the S AVE CONFIG menu item. If the SAVE CONFIG menu item is not selected, the information will not be restored upon the next system power up [...]

36 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Recall Config This menu allows the user to recall input configurati ons t hat were previously saved for the currentl y selec ted input format and type. Only configurations that match the current format and type will be displa yed. In order to recall a configuration, [...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 37 Output Setup Submenu This menu is used to configure the outp u ts of the ImagePR O. T he Output Setup Menu is illustrated below. This menu can be accessed from the SETUP MENU. NOTE: Configuration parame ters entered in this menu a re saved in non-v olatile memory by u[...]

38 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E For the Horizontal entries, the unit of measure is pixels. H T o tal indicates the total pixel count per line. H Position sets the offset of start of active area from H sync. H Active sets the size of the active area. H Sync sets the H sync width. For the vertical en[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 39 Sync Settings Submenu This menu allows the user to specify the s ync types for the current output. The submenu is illustrated bel o w: The Sync Out menu item selects among t he five possible o utput sync types: CSync, +H+V, +H-V, -H+V, -H-V. The default setting is -H [...]

40 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Flicker Reduce The Flicker Reduce value is n/a when th e output format is non-interlaced. Fo r interlaced formats, the range is Off (no flicker reduction) or +1 (minimum flicker reduction) through +20 (ma xim um flicker reduction). Genlock Submenu This sub-menu sets [...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 41 With ImagePRO-SDI or ImagePRO-HD units, when Genlo ck type HV is s elected, and the ImagePRO output is interlaced, the message “FOR SDI OUT” is displayed as sh o wn below: H Phase The H Phase setting allo ws the output H timing to be a djust ed re lative to the ge[...]

42 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E When Input Auto Acquire is On, the system will al ways perfo rm a full sync acquisition on t he in put signal anytime the input channel is selected, the input t ype is chang ed, or the input signal changes sync rates. When Auto Acquire is Off, the system will use the[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 43 Formats Submenu This menu is used to define and save a ne w video format, or to edit and save a previously-defined format . These saved formats are stored in a user li brary, which is search ed d uring the auto-acquisition pr ocess before the standard system librar y.[...]

44 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The <editable_string> field can be selected with the SEL butt on. The cont ent of the fiel d will initially be “Format1”. Editing the string is initiated by pressing SEL with th e > cursor on the editable line. At this point, the > changes to #, and a[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 45 If the user picks a name that's already in use in the user library, a confirmation menu is displayed when the user invokes the Save command: Pressing the SEL key will cause the existing lib rary format to be overwri tten with the new format. Pressing the ESC key [...]

46 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E If the format selected for deletion is currently an Input format used by any of the input channels or is the Input format that is saved in an input configuration, the foll owing screen will be displaye d: H,V Parameters These selections set the H and V paramet er s ([...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 47 Views Submenu The Views menu allows managem ent of up to 16 stored “Views”. A View is a combination of zoom and pan settings. For example, the user may define a vie w that maps the entire input image to the upper left quarter of the output image. A view is defined[...]

48 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The view to delete is selected from the list of availa ble views. Deleting a vi ew simply resets its pan and zoom settings to their default values. A confirmati on screen will appear when SEL is pressed. DELETE VIEW > View [val] Delete[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 49 Effects Submenu The effects menu selects the transition effect when switchin g bet ween input channels. T he user may select form the following selections: - Transition with Image Cut; The currently selected chann el will be frozen, the new channel’s video will be a[...]

50 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Tech Support Submenu The version displaye d is the installe d op eratin g firmware version number. TECH SUPPORT Version <fw_ver> Phone 866-FRI-SUPT[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 51 System Submenu This menu allows the user to adjust the VFD Brightness an d remote control setting for RS-232 or Ethernet Interfaces as illustrated below. NOTE: Configuration parame ters entered in the sy stem menu are sav ed in non-v olatile memory by using the SAVE S[...]

52 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E The handshake value is sele cted from the follo wing values: Off or On (CTS/RTS). The reset command restores the RS232 settings to def aults: 38400, N81, Handshake On . After connecting the PC COM port to the ImagePRO RS-232 connector the user may open a serial ter m[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 53 Valid "nnn" fields can range from 000 to 2 55. As with any selection line, the user must press the SEL button to begin editing the IP values. At this point, the first value is high lighted. Turning th e knob mov es the value through the range 0 to 9. When th[...]

54 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E EDID DVI Input Format submenu This menu allows the user to update the ImagePRO-HD ™ ’s EDID’s preferr ed resolution. NOTE: This menu is for advanced users o n ly. Do not reprogram the EDID unless it is necessar y. This menu is only available on ImagePRO-HD ™ [...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 55 Press the ESC key to proceed with the non-volatil e memor y programming. Once no DVI source or display Device are detected, ImagePRO will proceed with pr ogramming the non-volatile memory while the follo wing message is briefly displayed. If the non-volatile memory pr[...]

56 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Save System State This command explicitly saves all settings in the system state submenu so they may be restored at power up. This command will also save the currently selected input chan nel as the default input sel ectio n upon power up. If the user wants the Image[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 57 Test Pattern Menu This menu is invoked by pr essing the T EST PAT button. The type selection enables a test pattern or turns them off. The value choices are: Off H Ramp V Ramp 100% Col Bars 75% Col bars 16x16 Grid 32x32 Grid Burst 50% Gray Gray Steps 1 Gray Steps 2 Th[...]

58 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Zoom Menu This menu is invoked by press ing the Z OOM button. T he default zoom amount is 100%. By selecting Amount and pressing SEL the user may increase zoom a bove 100% (z oom into the input Video) or decrease zo om b elow 100% (zoom out). Independent zoom values [...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 59[...]

[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 61 4 CHAPTER FOUR Remote Commands What you will find in this chapter…  Serial Command Syntax  Remote Commands  ImagePRO TM Command List/Description Model IP-2003 ImagePRO – Multi Format Image Processor[...]

62 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 63 Serial Command Syntax Serial Parameters The following are the default paramete r settings for seri al communication. Baud Rate is 38.4K. Parity is NONE. Stop Bit is 1. Data Bit is 8. For RS-232 signal connections, refer to Chapter 2 – Install ation. RS232 Mode The I[...]

64 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO TM Remote Commands Resolution Re mote Commands RESH Query list of available Resolutions RESI nn Set current Input Resolution RESI? Query Input Resolution RESO nn Set Output Resolution RESO? Query Outp ut Resolution Input Remote Commands ACQ mode Disable/Enab[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 65 ISMP? in Query Input Sample mode ISYNC in mode Set Input Sync ISYNC? in Query Input Sync ISYNCSLICE in nnn Set Input Sync Slice Threshold ISYNCSLICE? in Query Input Sync Slice Threshold ITYPE in mode Set Input Type ITYPE? in Query Input Type IVATV nnnn Set Input Vert [...]

66 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E OUSCN? Query Output Underscan OTPM type raster Enables/disables Ou tput test pattern and raster bo x OTPM? Query Output test pattern and raster box mo de OVATV nnnn Set Output Vert Active OVATV? Query Output Vert Active OVPOS nnnn Set Output Vert Position OVPOS? Quer[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 67 Logo Remote Commands LOGOD Delete currently saved Logo image from Flash LOGOL Load currently saved Logo image from Flash to Logo Frame store buffer LOGOS Save current output im age as Logo im age to Flash LOGOI Query Log o resolution Effects Related Commands TRN type [...]

68 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E ImagePRO TM Command List/Description Resolution Remote Commands Command: RESH Description: Query the available resolution list for the ImagePRO. Parameters: None Returns: All available re solutions in the format: n : HxV @F (example: 20 : 1024x768 @59. 94) Example: R[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 69 Input Remote Commands Command: ACQ mode Description: Turns Auto acquisition mode off/on. Parameters: mode [0 | 1] Off | On Query: ACQ? Returns Auto acquisiti on mode in the format = mode Example: ACQ 0 (Turns auto acquisiti on mo de off) ACQ? (Queries for auto acquisi[...]

70 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E n - Input Aspect Ratio: n[0-5], 1:1 | 3:2 | 4:3 | 5:4 | 16:9 | Custom cn - (Optional) Custom Input As pect Ratio: (0.75 – 3.00) NOTE : cn parameter is not required unless user se lects Custom Input Aspect Ratio (i.e. n = 5) Query: IAR? in Returns the Input Aspect R[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 71 ICLIST Description: Lists the names of all saved Input configurations. Parameters: None Returns: List the names of saved In put configuratio ns, one n ame per line. Example: ICLIST (Lists all sa ved Input configurations.) Command: ICDEL filename Description: Delet e s[...]

72 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E = mode Example: ICSP 1 2 (Sets YPbPr input colorspace to Beta for channel 1) ICSP? 2 (Queries channel 2 for Input Colorspace.) Command: IEDGE in edge nnnn Description: Set Input Edge in oversample mode. The minimum and maximum limit is de pendent on the input resolut[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 73 nnnn - Input Horizontal Position: nnnn[(Input H Sync) - +(H Total - H Active)] Query: IHPOS? in Returns the Input Horizontal Position in the format = nnnn Example: IHPOS 1 296 (Set Input Horizontal Position for channel 1 to 296) IHPOS? 1 (Queries Input Horizontal Posi[...]

74 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E IRBRT? 1 R (Queries input Red Brightness of channel 1. ) Command: IRCNT in c nnn.n Description: Adjusts the Input RGB Contrast values. Parameters: in - Input chnl [1-3] c - Color [R|G|B] nnn.n - Contrast value; Range –25% to +25% Query: IRCNT ? in c Returns the Inp[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 75 ISYNCSLICE in nnn Description: Adjusts the Input Sync Slice Threshold selection. Parameters: in - Input chnl [1-3] nnn - Sync Slice Threshold [20 – 280mV (in steps of 10)] Query: ISYNCSLICE? in Returns the Input Sync Slice Threshold sele cted for the specified input[...]

76 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Example: IVTOTAL? (Queries Input Vertical T otal) Command: IVREC in Description: Input Channel View Recall. Parameters: in - Input chnl (1-4) chnl 4 only for ImagePRO-SDI and ImagePRO-HD uni ts Example: IVREC 1 (Recalls Input Channel Vie w of channel 1) Command: IVSA[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 77 Output Remote Commands Command: GLMODE src type Description: Sets Genlock Source and Genlock Type Parameters: src [0-4], Freerun | Input Video | H+V Sync | C Sync | Black Burst type [1-3], V Lock | HV Lock | HVScLock(Full lock) Query: GLMODE? Returns the Genlock Sourc[...]

78 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Parameters: None Example: OCRST (Reset Output Configuration) Command: OCSAV Description: Save Output Configuration to non-volatile memor y. Parameters: None Example: OCSAV (Save Ou tput Configuration) Command: OCSP mode Description: Sets Output Colorspace mode. Param[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 79 Command: OHATV nnnn Description: Set Output Horizontal Active. The minimum and maximum limit is dependent on the outpu t resolution. Parameters: nnnn - Output Horizontal Active: nnnn[ (Actual Out put H Active * 2/10, with absolute minimum value of 150) - +(Actual Outp[...]

80 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: OHUE nnn Description: Adjust Output Hue. Only applicable if outp ut is NT SC. n/a if PAL Parameters: nnn - Output Hue (-22.0 - +22.0) Query: OHUE? Returns the Output Hue value in the format = nnn Example: OHUE 20 (Adjust Output Hue to 20) OHUE? (Queries Outp[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 81 OSHRP? (Queries Output Sharpness) Command: OSOG n Description: Output Sync On Green mode. Parameters: n - Output SOG: n[0-2] Off | Standard | Tri-level Query: OSOG? Returns the Output Sync On Green mode in the format = n Example: OSOG 0 (Turns off Output Sync On Green[...]

82 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E of 150) - +(Actual Output V Active *6/5, with absol ute maximum value of Output V Total – Output V Syn c)] Query: OVATV? Returns the Output Vertical Active value in the format = nnnn Example: OVATV 768 (Set Output Vertical Active to 768) OVATV? (Queries Output Vert[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 83 Edit Custom Format Remote Commands Command: EFLIST Description: Lists the names of all saved custom formats. Parameters: None Returns: List the names of saved custo m formats, one name per l ine. Example: EFLIST (Lists all saved custom formats.) Command: EFRES nn Desc[...]

84 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: EFHATV nnnn Description: Set custom format’ s Horizontal Active value. Parameters: nnnn - H Active [500 - +(H Total - H Sync - H Front Porch)] Query: EFHAT V? Returns the custom format’s Horizo ntal Active value in the format = nnnn Example: EFHATV 1024 [...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 85 Command: EFVATV nnnn Description: Set custom format’ s Vertical Active value. Parameters: nnnn - V Active [400 - +( V Total - V Sync - V Front Porch)] Query: EFVAT V? Returns the custom format’s Vertic al Active value in the format = nnnn Example: EFVATV 768 (Set [...]

86 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E EFDEL filename Description: Deletes saved custom format. This fil ename is translated to all u pper cas e characters Parameters: filename – name of custom format to be deleted (translated to upper cas e). Example: EFDEL FORMAT1 (Deletes cust om format with the name[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 87 System and Ethernet Remote Commands Command: DMSG mode Description: Sets Debug message display mode. Parameters: mode - DMSG mode [0-1] Off | On Query: DMSG? Returns the Debug message displ ay mode in the format = mode Example: DMSG 1 (Sets Debug message mode to On) D[...]

88 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Example: EMAC? (Queries for Ethernet MAC address) Command: SBAUD n Description: Adjust t he Serial Baud Rate. Parameters: n - Serial baud rate: n[0-4] 1200 | 2400 | 9600 | 19200 | 38400 Query: SBAUD? Returns the Serial Baud Rate in the format = n Example: SBAUD 0 (Ad[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 89 Logo Remote Commands Command: LOGOD Description: Delete Logo image from non-v olatile memory . Selecting Blac k/Logo ch annel will now displa y black. Logo feature only available on ImagePRO-SDI and ImageP RO-HD. Parameters: None Example: LOGOD (Delete saved Logo imag[...]

90 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Effects Remote Commands Command: TRN type in Description: Selects transition type when switchin g bet ween inputs. T ransition delay is onl y applicable if the transition type selected is Fade to black / Fade to logo. Fade to logo transi tion type only available on I[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 91 Pan / Zoom / View Remote Commands Command: PANH nnn.n Description: Set Output Horizontal Pan. Parameters: nnn.n - Horizontal Pan (-100.0% - +100.0%) Query: PANH? Returns the Output Horizontal Pan value in the format = nnn.n Example: PANH 50(Set Output Horizontal Pan t[...]

92 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E Command: VIEWR nn Description: Recall View Parameters: nn – View Index [0 - 15]. Index 0 is default view (i.e. Zoom = 100%, Pan H = 0%, Pan V = 0%) Example: VIEWR 1 (Recall saved View 1.) Command: VIEWS nn Description: Save current Vi e w to non-volatile memory Par[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 93[...]

[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 95 5 CHAPTER FIVE Software Upgrade Instructions What you will find in this chapter…  Software Upgrade Instructions Model IP-2003 ImagePRO – Multi Format Image Processor[...]

96 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 97 Software Upgrade Instructions Overview The ImagePRO units incorporate the system soft ware in a Flash memory compon ent. F lash memor y allows easy field upgrades without the need to send the unit b ack to the factory. The loader utilit y provides the capability to up[...]

98 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E 2. Find the Folsom Research folder an d sel ect ImagePRO F la s h F ile Lo ader. Preparing to Upgrade the ImagePRO Unit 1. Plug the DB-9 male connector into the port labeled “RS- 232 on the back of the ImagePRO unit. 2. Make sure the other end of the cable is attac[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 99 6 CHAPTER SIX Barco Folsom Information What you will find in this chapter…  Warranty  RMA Information  Technical Support/General Contact Information Model IP-2003 ImagePRO – Multi Format Image Processor[...]

100 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 101 Barco Folsom Information Barco Folsom Warranty All video products are designed and teste d to the highest quality standards and are backed b y a full 3- year parts and labor warranty. Warranties are effective up on delivery dat e to customer an d are non-transferable[...]

102 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 103 A APPENDIX  Technical Specifications Model IP-2003 ImagePRO – Multi Format Image Processor[...]

104 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 105 Technical Specifications Video Input Inputs: Universal Inputs: (3) high band width video channels suppo r t, RGBHV/RGBS/RGsB computer video, component video (STD or HDTV), S-video, or Composite video Connectors: Input 1 and 2 on 15-pin HD con nectors with buffer ed l[...]

106 ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / R evisio n E User Control Local: User-friendly front panel interface Ethernet connection (with TCP/IP) or RS -232 serial port for real-time c ontrol Physical Height: 1.5"; Width: 17" (43.2 cm) or 19" (48.3 cm) with rack-mount option; Depth: 13"; Weight: 9lbs.[...]

Manual # 26-0302000-00 / Revisio n E ImagePRO – Multi Format Image Processor 107 FCC Classification This equipment has been te sted and found to comply with the limits for a Class A digi tal device, pursuan t to Part 15 of the FCC Rules. These limits a re designed to prov ide reasonable protection against h armful interferen ce w hen the equipmen[...]