Barco R9001760 manual

BARCO PROJECTION SYSTEMS Date : 04122000 OWNER'S MANUAL Rev. : 03 REALITY 6400 R9001760 R9001769 Art. No. : R5976069[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, January 2000. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco[...]

i-1 Table of Contents 5976069 BARCOREALITY 6400 04122000 TABLE OF CONTENTS --------------------------------------------------- I-1 UNPACKING AND DIMENSIONS -------------------------------------- 1-1 Projector dimensions ------------------------------------------------- 1-1 Unpacking --------------------------------------------------------------- 1-[...]

1-1 Unpacking and Dimensions 5976069 BARCOREALITY 6400 14032000 1 1 23 4 5 379 Pull T o op en UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. Save the original shipping carton and packing material, they will be necessary i[...]

1-2 Unpacking and Dimensions 5976069 BARCOREALITY 6400 14032000 Battery installation in the RCU. Two batteries are packed together with the RCU. Before using your RCU, install first these batteries. 1 Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU. 2 Lift up the top side of the cover at the sam[...]

2-1 Installation Guidelines 5976069 BARCOREALITY 6400 04122000 2 INST ALLA TION GUIDELINES Installation Guidelines Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * Environment Do not install the projection system in a si[...]

2-2 Installation Guidelines 5976069 BARCOREALITY 6400 04122000 Screen wid th B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projector (without feet) and middle of the lens. Value to be subtracted from B to obtain the correct installation position. ([...]

2-3 Installation Guidelines 5976069 BARCOREALITY 6400 04122000 * How to install a projection lens? The projector is supplied without any lens. The following lenses are available, or will become available (contact a Barco service center) as an option : QFD(1.27:1) R9840400 QFD(2.5:1) R9840290 QFD(1.4-2.1:1) R9840380 QFD(2.1-3.0:1) R9840390 QGD(3.5-4[...]

2-4 Installation Guidelines 5976069 BARCOREALITY 6400 04122000 How to install the lens? 1. Take the lens out of its packing material. 2. Open the lens cover of the projector by pivoting it up and take it off. image 1 3. Open both lens locks (B) by pulling them backwards. Unlock first by pulling clip (A) forwards. image 2 4. Put the lens on the lens[...]

3-1 Location and Functions of Control 5976069 BARCOREALITY 6400 21082000 3 SDI SDO S-VIDEO VIDEO CO M P UTE R IEEE 139 4 TR IG MO US E MO NI T OR RS 232 IN RS2 32 OUT AU DIO IN AU DIO IN AU DI O I N AUDIO OUT CO M M. PORT RC C B A R GB H / C V 5 6 2 1 4 3 23 1 45 6 7 8 9 1 0 1 1 LOCA TION AND FUNCTIONS OF CONTROL Front Panel Terminology The front p[...]

3-2 Location and Functions of Control 5976069 BARCOREALITY 6400 21082000 SD I SDO S-VID E O VIDEO COMPUTER IEEE 1 394 TRIG MOUS E MONI TOR R S232 IN RS232 O UT AU DIO IN AU DIO I N A U DIO I N AU DI O OU T COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 12 3 4 5 6 7 8 9 10 1 TRIG : output voltage of 5 V when projector is on. 2 MOUSE : mouse output to [...]

3-3 Location and Functions of Control 5976069 BARCOREALITY 6400 21082000 F1 F2 F3 F4 F5 ADJ EXIT ENTER PAU SE PH ASE TEX T SHARPN TI N T COLOR BRIGHTN CONTR TREBLE BALANCE BASS VOL 9 0 78 5 6 34 1 2 1 2 3 5 6 4 7 8 9 10 18 17 16 15 14 13 12 11 COLO R PHA SE SHA RPN TI NT BR IGHTN STAND BY ENTER TEXT EXI T PAUS E 2 1 4 3 5 6 8 0 9 7 CONTRAST 9 12 11[...]

3-4 Location and Functions of Control 5976069 BARCOREALITY 6400 21082000 13 FREEZ : press to freeze the projected image. 1 4 TEXT : when adjusting one of the image, e.g. controls during a meeting, the displayed bar scale can be removed by pressing 'TEXT' key first. To re-display the bar scale on the screen, press 'TEXT' key agai[...]

Installation Set Up 4-1 5976069 BARCOREALITY 6400 21082000 4 INST ALLA TION SET UP Configuration The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. Fron t/Tabl e Front/Ceilin g Changing the configuration : To change the configuration of the projector, proceed [...]

5-1 Connections 5976069 BARCOREALITY 6400 14032000 5 SD I SDO S- VID EO VI D EO CO MP UTE R IEEE 1394 TRI G MO US E MONITOR RS232 IN RS232 OUT AUDIO IN AUDIO IN AUDIO IN AUDIO IN COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 SDI S-VI DEO VIDE O 4 3 Proj ector mod e indic at ion F1 F2 F3 F4 F5 ADJ EXIT EN TE R PAUSE PHASE TEXT SHARP N TINT COLOR BRIG[...]

5-2 Connections 5976069 BARCOREALITY 6400 14032000 Switching to Stand-by. When the projector is running and you want to go to stand-by, press the stand-by key for 2 seconds until the message 'Saving da ta, please wait' is displayed. Do not press any longer on the standby key otherwise the projector will restart. Switching Off To switch of[...]

5-3 Connections 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. SD I SDO S- VID EO VI DEO CO MPU TE R I EEE 1 394 TRI G M MONI TOR R GB H / C V 5 6 2 1 4 3 ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE INSTALLATION INPUT SLOTS 800 PERIPHIRAL CONFIGURATION OSD COLOR [...]

5-4 Connections 5976069 BARCOREALITY 6400 14032000 SDI SD O S- VIDEO VI DEO CO MPUT ER IEEE 1 394 TRI G MOU SE MON IT OR RS232 IN RS232 OUT AUD IO IN AU DIO IN AU DIO IN AU DIO IN CO MM. PORT RC C B A RGB H / C V 5 6 2 1 4 3 TV t uner , e. g. Ma r c o P o l o VCR Co mp os i t e Vi deo or or A, B or C Computer input/Monitor output Connect the output[...]

5-5 Connections 5976069 BARCOREALITY 6400 14032000 S-Video Input Input signal : Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals. SDI SD O S- VIDEO VI DEO COMP UTE R IE EE 1394 TRI G MOUS E MONITOR RS232 IN RS232 OUT AUDI O IN AU DIO IN AU DIO IN AUDIO I N COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 VCR S- VHS Luma[...]

5-6 Connections 5976069 BARCOREALITY 6400 14032000 connections : 1 x BNC input and 1 x BNC output. The input is always 75 Ω terminated. The output impedance of the SDO is 75 Ω . Slot 5 Selection : Key in 5 on the RCU or the local keypad. Note : When a RCVDS05 is connected to the projector, the SDI input is available by keying in 85 on the RCU. [...]

5-7 Connections 5976069 BARCOREALITY 6400 14032000 Communication port for communication with peripherals This port can be configured to accept PPM or RC5 coded signals. To change the port configuration see 800 Peripherals in Chapter Installation. Connecting a RCVDS 05 to the projector. - Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS&ap[...]

6-1 Controlling 5976069 BARCOREALITY 6400 14032000 6 CONTROLLING C e ilin g Scr ee n IR se n so r RCU SDI SDO S- VI DEO VI DEO COMPUTE R IE E E 1 394 TRI G MOUSE MONITOR RS232 IN RS232 OUT AUDIO IN AU DIO IN AUD IO IN AUDIO IN COMM. PORT RC C B A R GB H / C V 5 6 2 1 4 3 SDI SD O S-VID EO VI DE O COMPUTER IEEE 1 394 TRIG MOUSE MONIT OR RS232 I N RS[...]

6-2 Controlling 5976069 BARCOREALITY 6400 14032000 0 127 Projector address a. Software set up of the projector address. See 'Change projector address' in chapter 'Service mode'. b. How to control the projector or projectors. The projector's address may be set to any value between 0 and 255. When the address is set, the proj[...]

6-3 Controlling 5976069 BARCOREALITY 6400 14032000 Tint Control Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system. Use the + button Use the - button. Sharpness Control. Use the + button for a sharper picture. Use the - button for a softer picture. Phase Control Use the control disc to adjust the phase. Freez key[...]

6-4 Controlling 5976069 BARCOREALITY 6400 14032000 The Selection key. When the Selection key is pressed, the zoom/focus/shift menu will be displayed inmediately. To focus or zoom the image : 1 Push the é o r ê key to zoom and ç or è key to focus the image. 2 When finished, press EXIT to return. To shift the image : 1 Press ENTER to switch to th[...]

7-1 Start up of the Adjustment Mode 5976069 BARCOREALITY 6400 14032000 7 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode All source parameters, picture and audio tuning, and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adjustment Mode&ap[...]

7-1 Auto Image Adjust 5976069 BARCOREALITY 6400 21082000 8 A UT O IMAGE ADJUSTMENT Auto Image Adjustment Push the cursor key é or ê to highlight 'Auto Image' and press ENTER . With auto image, it is possible to switch the auto image function 'on' or 'off' and to adjust an existing image when the auto image function i[...]

8-1 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 9 RANDOM ACCESS ADJUSTMENT MODE ADJUSTMENT MODE Select a path from below : AUTO IMAGE RANDOM ACCESS INSTALLATION SERVICE Source 01 S el e c t wi t h o r then <ENTER> <EXIT> to return. Starting up the Random Access Adjustment Mode Push the cu rsor key é or ê to highli[...]

8-2 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. S el e c t wi t h o r then <ENTER> <EXIT> to return. To enter the File Service, handle as follow : 1 Pushing the cursor key é or ê to highlight 'File Service'. 2 Press ENTER to select. The Fil[...]

8-3 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. FILE SERVICE LOAD EDIT RENAME COPY EDIT FILE Filename Src Resolution ----------------------------------------------------- Video525.s01 1 675x240i Video525.c01 1 675x240i Video525.c02 1 675x240i ---------------------[...]

8-4 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S e l e c t w i th o r <ENTER> to toggle o r t o change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 10 Field polarity [pos] Field select [both] Vert ica l refres h [sync] Vertical sync polarity [leading] S[...]

8-5 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. S el e c t wi t h o r then <ENTER> <EXIT> to return. S el e c t wi t h o r then <ENTER> <EXIT> to return. Rename To change the name of a selected file: 1 Push the cursor key é or ê to highli[...]

8-6 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. S el e c t wi t h o r then <ENTER> <EXIT> to return. A confirmation menu "Delete file 'file name'?" is displayed. When you want to delete the file, press ENTER . If you do not want to [...]

8-7 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 0 2.5 3 Color Temperature 1 Push the cursor key é or ê to highlight 'Color Temperature'. 2 Press ENTER to select. The color temperature selection menu will be displayed. The next choices are possible : - Projector white - Broadcast 3200 K - Film 5400 K - Vid eo 6500 K [...]

8-8 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 Dynamic Color Depth Increases color contrast for all video and data sources. To change the dynamic color depth value : 1 Push the cursor key é or ê to highlight 'Dynamic Color Depth'. 2 Press ENTER to select. 3 Change the value by pushing the cursor key ç o r è until[...]

8-9 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 AUDIO TUNING VOLUME BALANCE BASS TREBLE MUTE [OFF] FADE MODE [STEREO] VIDEO - AUDIO LOCK 1234 5 6 [A] [C ] [B] [A] [B] [A] S el e c t wi t h o r then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING AUDIO TUNING GEOMETRY S el e c t wi[...]

8-10 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 S el e c t wi t h o r then <ENTER> <EXIT> to return. S el e c t wi t h o r then <ENTER> <EXIT> to return. AUDIO TUNING VOLUME BALANCE BASS TREBLE MUTE [OFF] FADE MODE [STEREO] VIDEO - AUDIO LOCK 12 3 4 56 [A] [C ] [B] [A] [B] [A] 15 0 -15 FADE S el e c t w[...]

8-11 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [5:4] OPTIONS S el e c t wi t h o r then <ENTER> <EXIT> to return. Example for table mount configuration Ho ri zonta l si z e adju stment Vert ical si z e adju stment Fi xed side s GEOMETRY SHIFT SIZE SIDE KEYSTO[...]

8-12 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 Adjustment of the blanking on the top of the image S el e c t wi t h o r then <ENTER> <EXIT> to return. Bottom bl anking Top bla nking Rig ht blanki ng Left blank ing Adjustment of the blanking on the bottom of the image Correct by pushing the cursor key up or down Ad[...]

8-13 Random Access Adjustment Mode 5976069 BARCOREALITY 6400 14032000 GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [5:4] OPTIONS GEOMETRY OPTIONS Use the same side keystone correction for all files ? [YES] <ENTER> to toggle <EXIT> to return Options To change the geometry options : 1 Push the cursor key é o r ê to highlight [...]

10-1 Installation Mode 5976069 BARCOREALITY 6400 21082000 10 INST ALLA TION MODE Starting up the Installation Mode Push the cursor key é or ê to highlight 'Installation Mode' and then press ENTER . The following item can be selected in the Installation mode : Input slots : to set up the input priority. 800 Peripheral : to select the typ[...]

10-2 Installation Mode 5976069 BARCOREALITY 6400 21082000 If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral . If no 800 peripheral indication is made on the menu, there are still two possibilities : - no RCVDS or VS05 connected or - RCVDS is switched off. When a 800 perip[...]

10-3 Installation Mode 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Text Box Position With the align function, the text box position can be changed from bottom right to automatic or center. 1 Push the cursor key é or ê to highlight 'Text[...]

10-4 Installation Mode 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. 800 Peripheral Output module selection. When a RCVDS05 is connected to the projector, the type of output module of this RCVDS05 has to be defined in the 800 peripheral menu. Th[...]

10-5 Installation Mode 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Internal Patterns IThe projector is equipped with different internal patterns which can be used for measurment purposes. To select an internal pattern, handle as follow : 1 Push the cursor key é or ê to highlight 'Internal Patt[...]

Service Mode 11-1 5976069 BARCOREALITY 6400 21082000 11 Select with or then <ENTER> <EXIT> to return. Starting up the Service Mode Push the cursor key é or ê to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter the password to contin[...]

Service Mode 11-2 5976069 BARCOREALITY 6400 21082000 UNIFORMITY ADJUST PURITY DEFAULT Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY LAMP DIMMING MORE... Select with or then <ENTER> <EXIT> to [...]

Service Mode 11-3 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Change Password This item is password protected when the password strap is installed. How to enable or disable the password function ? The password function is enabled when the pass[...]

Service Mode 11-4 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Change Baudrate PC The communication speed between projector and computer, e.g. PC or MAC, has 8 possible speeds. The baud rate speed can be software set. Handle as follow: 1 Push t[...]

Service Mode 11-5 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. SERVICE BARCO LOGO PANEL ADJUSTMENTS UNIFORMITY PRESET INPUT BALANCE I2C DIAGNOSIS MORE... BARCO LOGO STATUS : [ON] BACKGROUND : [ON] SHIFT HOT KEY : [TEXT] Select with or then <ENTER> <EXIT> to return. Dimming The lamp can be [...]

Service Mode 11-6 5976069 BARCOREALITY 6400 21082000 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. I2C DIAGNOSIS DC A DECODER 12H # # # INPUT SELECT 1 6H # # # AUDIO 18 H # # # MOTOR DRIVER 7 4H # # # LAMP DRIVER 78 H # # # LCD DRIVER C0 H # # # LCD DRIVER C4 H # # # LCD DRIVER C[...]

A-1 Appendix A : Standard Source Set Up Files 5976069 BARCOREALITY 6400 210800 A ST ANDARD SOURCE SET UP FILES Name : name of file, contains the settings Resolution : image resolution, when fol- lowed by ...I means interlaced. FVERT Hz : vertical frame frequency of the source FHOR kHz : horizontal frequency of the source. FPIX MHz : pixel frequency[...]

A-2 Appendix A : Standard Source Set Up Files 5976069 BARCOREALITY 6400 210800 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z PAM800 1120 X 375I 44,936 36,443 50,000 1372 1120 406 375 PC98_1 640 X 400 56,416 24,823 21,050 848 640 440 400 PC98_2 1120 X 375I 39,994 32,835 47,840 1457 1120 411 375 PC98_3 1120 X 750 60,000 50,000 78,56[...]

B-1 Lenses 5976069 BARCOREALITY 6400 21082000 B LENSES Lens Cleaning Procedure To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deionize d air. DO [...]

B-2 Lenses 5976069 BARCOREALITY 6400 21082000 Lenses QFD(1.27:1) R9840400 QFD(2.5:1) R9840290 QFD(1.4-2.1:1) R9840380 QFD(2.1-3.0:1) R9840390 QFD(3.5-4.5:1) R9840060 QFD(4.5-6.0:1) R9840100 QFD(7:1) R9840410 Lens formulas to calculate the projector distance. QFG(1.27:1) Metric PD = 1.29 x SW - 0.0195 + 0.00276/SW Inch PD = 1.29 x SW - 0.77 + 42.78/[...]

C-1 Source Numbers 80 - 89 and 90 - 99 5976069 BARCOREALITY 6400 251099 C SOURCE NUMBERS 81 - 86 AND 91 - 96 Projector without any 800 peripheral connected. The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers. This file can contain different settings. The[...]

C-2 Source Numbers 80 - 89 and 90 - 99 5976069 BARCOREALITY 6400 251099 Source numbers 81 - 86 Only valid if no input module is connected to slot 81 - 86 of a RCVDS05. The source numbers 81 - 86 correspond to the physical inputs 1 - 6 of the projector. e.g. When slot 1 of the projector has to be selected, key in source number 81. The relationship b[...]