Barco R9002790 manual

BARCO PROJECTION SYSTEMS Date: 06.09.2001 OWNER'S MANUAL Rev.: 00 R9002790 Art. No.: R5976336 SLM R6 Executive[...]

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, September 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Bar[...]

i-1 R5976336 BARCOSLM R6 Executive 06092001 i TABLE OF CONTENTS TABLE OF CONTENTS ...................................................................................................... I - 1 SAFETY INSTRUCTION RELA TED TO SLM PROJECT ORS ......................................... 1-1 Warnings .........................................................[...]

i-2 R5976336 BARCOSLM R6 Executive 06092001 Lamp Light Output Indication ................................................................................................... ......................................................... 4 - 2 Switching to S tand-by . ........................................................................................[...]

i-3 R5976336 BARCOSLM R6 Executive 06092001 RANDOM ACCESS ADJUSTMENT MODE ...................................................................... 7-1 Random Access Mode ............................................................................................................. ................... 7 - 1 S tarting up .................................[...]

i-4 R5976336 BARCOSLM R6 Executive 06092001 Shift ........................................................................................................................................................... 7-14 What can be done ? ............................................................................................................. ..........[...]

i-5 R5976336 BARCOSLM R6 Executive 06092001 How to change the password ? ................................................................................................... ................................................... 9- 4 Access Control List ....................................................................................................[...]

i-6 R5976336 BARCOSLM R6 Executive 06092001[...]

1-1 Safety R5976336 BARCOSLM R6 Executive 06092001 1 SAFETY INSTRUCTION RELA TED T O SLM PROJECTORS Warnings To prevent personel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to BARCO. To prevent injuries and physical damage, always read this manual and all labels[...]

1-2 Safety R5976336 BARCOSLM R6 Executive 06092001 Note Definitions Definition Qualified service technicians or Qualified technicians : Persons having appropiate technical training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons. Ext[...]

2-1 Packaging and Dimensions R5976336 BARCOSLM R6 Executive 06092001 2 1 23 4 5 379 Pull To op en PACKAGING AND DIMENSIONS Projector Packaging Way of Packaging The projector can be packed in two different ways : - in a flightcase or - in carton. Flightcase The projector is packed in a flightcase. Carton To provide protection during transportation, [...]

2-2 Packaging and Dimensions R5976336 BARCOSLM R6 Executive 06092001 Lens Packaging Way of Packaging Lenses are supplied as an individual item. They are packed in a carton. Projector Case Dimensions The dimensions are given in mm 25.4 mm = 1"[...]

3-1 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 3 INST ALLA TION GUIDELINES Installation Guidelines Ambient Temperature Conditions Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are crit ical to the optimum use of the projection system. Operation temperature[...]

3-2 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Regardless of the type of screen used, it is important that your screen is of sufficient height to display the images at the aspect ratio intended to be used. If you have insufficient height, you will have to reduce the overall image size in order to display the full image on your [...]

3-3 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Image 2 Image 3[...]

3-4 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Image 7 Re-adjusting the lamp position in the lamp casing With higher run times, the light output of the lamp will decrease, which results in a lower light output on the screen. This light output decrease can be compensated by readjusting the position of the lamp. As the projector [...]

3-5 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Lenses Which Lens has to be selected. 1 Determine the required screen width. 2 Determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-screen distance (PD). 3 Use the lens formulas to find the best corresponding[...]

3-6 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Installing the Projection Lens The projector is supplied without any lens. Installation of TLD lenses : Remove the foam rubber in the opening of the lens holder. 1 Take the lens assembly out of its packing material and remove the lens caps on both sides. 2. Move the handle (A) of t[...]

3-7 Installation Guidelines R5976336 BARCOSLM R6 Executive 06092001 Cleaning the lens To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deio nized a[...]

4-1 Connections R5976336 BARCOSLM R6 Executive 06092001 4 $ Fuses Warning For continued protection against fire hazard : - refer replacement to qualified service personnel - ask to replace with the same type of fuse. Switching ON Use the power switch to switch on. When '0' is visible, the projector is switched off. When '1' is v[...]

4-2 Connections R5976336 BARCOSLM R6 Executive 06092001 Lamp run time is 1500 hours. Operating the lamp longer than 1500 hours may damage the projector. Please replace the lamp. When OK (ENTER) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation is 1500 hours max. Do not use it longer.[...]

4-3 Connections R5976336 BARCOSLM R6 Executive 06092001 fixed inputs 1 & 2 5 Cable input or DVI inputs Variable inputs 3 & 4 2 digital inputs (Optional) Choice out of : SDI input order no. : R9840110 HD SDI Digital input order no. : R9840450 Input facilities, RCVDS05 or VS05 connected. Note : When using a RCVDS05 or VS05, the input configur[...]

4-4 Connections R5976336 BARCOSLM R6 Executive 06092001 Input module insertion into the projector To insert a module in one of the free slots, handle as follow : 1 Power down the projector and disconnect the power cord from the wall outlet. 2 Remove the dummy plate covering the chosen input slot by turning out both screws. 3 Slide the input module [...]

4-5 Connections R5976336 BARCOSLM R6 Executive 06092001 Fixed Slot (slot 1 & 2) Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector. Within the installation mode it is possible to setup the input for 5 cable or DVI (panellink). Which signal[...]

4-6 Connections R5976336 BARCOSLM R6 Executive 06092001 How to change the input slot setting 1 Press ADJUST or ENTER key to start up the Adjustment mode. 2 Push the cursor key é or ê to select Installation (menu 1) 3 Press ENTER . 4 Press the cursor key é or ê to select 'Input Slots' (menu 2) 5 Press ENTER . The internal system will s[...]

4-7 Connections R5976336 BARCOSLM R6 Executive 06092001 Connections : One BNC input terminal and one active loop-through BNC output terminal. The input is always 75 ohm terminated. The output inpedance of the SDI out is 75 ohm. How to select the Digital input : Key in the corresponding slot number on the RCU or the local keypad. Note : When a RCVDS[...]

4-8 Connections R5976336 BARCOSLM R6 Executive 06092001 HD SDI Digital Input (slot 3 & 4) What can be connected to this input ? This input is full compatible with HD digital sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quali ty. An active loop-through of the H[...]

4-9 Connections R5976336 BARCOSLM R6 Executive 06092001 Communication Connections Available communication connections : RS232/422 connection between projector and computer. Communication port for communication with BARCO peripherals. Trigger output RS232 Connections RS 232/422 input and RS232/422 output of the projector. The projector has a RS232/4[...]

4-10 Connections R5976336 BARCOSLM R6 Executive 06092001[...]

5-1 Getting Started R5976336 BARCOSLM R6 Executive 06092001 5 GETTING ST ARTED Remote Control & Local Keypad Functionality This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely . This remote control and local keypad is used for source selection, control, adaptation and se[...]

5-2 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Terminology 1 Barco key : = selection key, to get direct access to the lens adjustment menus. 2 ADJ. : ADJUST key, to enter or exit the adjustment mode. 3A ddress key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, foll[...]

5-3 Getting Started R5976336 BARCOSLM R6 Executive 06092001 $ Operating the Projector Switching on Use the power switch to switch on. When '0' is visible, the projector is switched off. When '1' is visible, the projector is switched on. When switching on with the power switch, the projector starts in the stand by mode. The proje[...]

5-4 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with é or ê then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL C[...]

5-5 Getting Started R5976336 BARCOSLM R6 Executive 06092001 LENS ADJUSTMENT ZOOM/FOCUS ZOOM with é or ê FOCUS with ç or è <ENTER> to Shift <EXIT> to return LENS ADJUSTMENT SHIFT SHIFT with é or ê , ç or è <ENTER> to Zoom/Focus <EXIT> to return Quick Lens Adjustment For a quick lens set up and image shift, press the B[...]

5-6 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Using the RCU Pointing to the reflective screen Point the front of the RCU to the reflective screen surface. Quick On Screen Color change For quick change of the the on-screen color of the highlighted items. The highlighted items on the menus can be displayed in red, green or yellow. For a[...]

5-7 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Hardwired Remote Input RCU used in a hardwired configuration. Plug one end of the remote cable in the connector on the bottom of the RCU and the second side in the connector on the input pa nel of the projector labelled 'Hardwired CTRL1'. Hardwired to the XLR Input RCU used in a [...]

5-8 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Projector Address Why a projector address ? As more than one projector can be installed in a room, the separate projectors should be separately addressable with an RCU or computer. There for each projector has its own address. Set up an Individual Projector Address The set up of a projecto[...]

5-9 Getting Started R5976336 BARCOSLM R6 Executive 06092001 PROJECTOR ADDRESS 001 To continue using the RCU with that specific address, it is necessary to enter the same address with the digit buttons (address between 0 and 9) within 5 seconds after pushing the address key. For example : if the Address key displays projector address 003, then press[...]

5-10 Getting Started R5976336 BARCOSLM R6 Executive 06092001 Phase Control Use the control + and - button to adjust the phase of the displayed image to climate pixel jitter on computer generated images. Note : this contol has no effect on Video images. The Pause key. When the Pause key is pressed, the image projection is stopped, a blue or black sc[...]

6-1 Start up of the Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 6 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode Start up All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adjustment Mode[...]

6-2 Start up of the Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Error Invalid password <EXIT> to return When the password is correct, you gain access to the selected item. When the password is wrong. The error message "Invalid password" is displayed on the screen. Press EXIT to continue and to return to the Service menu.[...]

7-1 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 7 RANDOM ACCESS ADJUSTMENT MODE Random Access Mode Starting up Push the control disc up or down to highlight 'Random Access' and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with é or ê then <[...]

7-2 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Picture Service Connecting a new Source. Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded[...]

7-3 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. Load File Start up the Load File. 1 Push the cursor key é or ê to highlight 'Load' (menu 1). 2 Press ENTER to select. The Load menu displays the corresponding files depending on the installed filter ([...]

7-4 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Edit File What can be done with the Edit File menu ? The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. How to start up the EDIT menu ? 1 Pu[...]

7-5 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê <ENTER> to toggle ç or è to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [trailing] Clamp delay 0 Clamp width 10 Field polarity [pos] Field select [both] Vertical refresh [sync] How to find the correct value[...]

7-6 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Field Polarity : The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double l ines are visible in the image). This can be corrected by forcing the field polarity to [neg] or [pos]. Use the ENTER key to toggle b[...]

7-7 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. How to change the characters ? 1 Push the cursor key ç or è to select the desired character (menu 4). 2 Change that character by pushing the cursor key é or ê . Numeric characters can be entered directly with[...]

7-8 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS DELETE FILE Filename Src Resolution ----------------------------------------------------- Video525.s01 1 675x240i Video525.c01 1 675x240i Video525.c02 1 675x240i [...]

7-9 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é or ê then <ENTER> <EXIT> to return. Picture Tuning Start Up To improve the image quality, the item in the Picture Tuning menu can toggl[...]

7-10 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 COLOR TEMPERATURE PROJECTOR WHITE COMPUTER 9300K VIDEO 6500K FILM 5400K BROADCAST 3200K CUSTOM BALANCE Select with é or ê then <ENTER> <EXIT> to return. PICTURE TUNING CTI [ON] COLOR TEMPARATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BAL[...]

7-11 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 3 PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE GAMMA = 2.2 How to change the Gamma Value ? To change the gamma value : 1 Push the cursor key é or ê to highlight 'Gamma' (menu 1). 2 Press ENTER to[...]

7-12 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE ADJUST RED WITH é OR ê BLUE WITH ç OR è Noise Reduction Purpose : Reduces noise and pixel jitt[...]

7-13 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY GEOMETRY SHIFT SIZE BLANKING ASPECT RATIO [4:3] Select with é or ê then <ENTER> <EXIT> to return. How to adjust the input balance [...]

7-14 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 GEOMETRY SHIFT SIZE BLANKING ASPECT RATIO [4:3] Shift What can be done ? The image can be shifted in a horizontal or vertical direction. To start up the shift action : 1 Push the cursor key é or ê to highlight 'Shift'. 2 Press ENTER to select. 3 Push the cursor k[...]

7-15 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Blanking What can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen an d to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking. Availab[...]

7-16 Random Access Adjustment Mode R5976336 BARCOSLM R6 Executive 06092001 Aspect Ratio What can be done? The projector can be forced to display a image in a typical aspect ratio. E.g. projecting a 4:3 image in a 16:9 format. Setting Up the Aspect Ratio. 1 Push the cursor key é or ê to highlight 'Aspect Ratio' (menu 1). 2 Press ENTER to[...]

8-1 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 8 INST ALLA TION MODE Installation Mode Start Up Push the cursor key é or ê to highlight 'Installation Mode' and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 INSTALLATION INPUT SLOTS 800 PERIPHERAL CONVERGENCE CONF[...]

8-2 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê <ENTER> to toggle <EXIT> to return. Component video Component Video - SS : component video with separate sync Component Video - SOY : component video with sync on Y Component Video - 3LSS : component video with 3 level separate sync. Component Video - 3LS[...]

8-3 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê <ENTER> to toggle <EXIT> to return. 800 PERIPHERAL menu 2 OUTPUT MODULE [STANDARD] INFRARED [ PPM ] Defining the Infrared Communication protocol W hen a peripheral is connected to the 'Comm Port', the communication can be in PPM or RC5. The type[...]

8-4 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 OSD COLOR HIGHLIGHTED ITEM RED GREEN YELLOW Select with é or ê then <ENTER> <EXIT> to return. menu 2 menu 1 Select with é or ê then <ENTER> <EXIT> to return. How to change this color setting ? 1 Push the cursor key é or ê to highlight 'OSD Color' ([...]

8-5 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Changing the Background Color To change the background color handle as follow : 1 Push the cursor key é or ê to highlight 'No signal' (menu 1). 2 Press ENTER to select. The 'No Signal' menu will be displayed (menu 2). 3 Push the cursor key é or ê to highlight &apo[...]

8-6 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Note : Each pattern (except Purity) can be inverted by pressing ENTER . For Page Char, the next or previous character can be selected by pushing the cursor key é or ê . To return to the normal pattern, press EXIT . Lens Adjustments What can be done ? The lens adjustments are motorized [...]

8-7 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Zoom/Focus/Shift Within the displayed pattern it is possible to adjust the Zoom/Focus and the Shift. Use the ENTER key to toggle between Zoom/Focus and Shift operation. How to Zoom/Focus ? 1 Push the cursor key é or ê to select Zoom/Focus (menu 1) 1 Push the cursor key é or ê to zoom[...]

8-8 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 <ENTER> to toggle <EXIT> to return. menu 2 LENS OPTIONS Use the same zoom and focus of the lens for all files ? [No] Quick Access Keys What can be done ? It is possible to get an overview of the programmed functions of the different function keys (only accessible with an adap[...]

8-9 Installation Mode R5976336 BARCOSLM R6 Executive 06092001 Menu Position What can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? 1 Push the cursor key é or ê to highlight 'Menu Position' (menu 1). 2 Press ENTER to toggle between [DEFAULT] and [CENTER]. [DEFAULT] : menus dis[...]

8-10 Installation Mode R5976336 BARCOSLM R6 Executive 06092001[...]

Service Mode 9-1 R5976336 BARCOSLM R6 Executive 06092001 9 Select with é or ê <ENTER> to toggle <EXIT> to return. LAMP Constant light output [YES] Serial number : R101111 Article number : R9840740 Run time : 10 hours Remaining run time : 1490 hours Number of strikes : 10 Z-AXIS : 100 SERVICE MODE Service Mode Start Up Push the cursor [...]

Service Mode 9-2 R5976336 BARCOSLM R6 Executive 06092001 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP MORE... Select with é or ê then <ENTER> <EXIT> to return. SERVICE BARCO LOGO ADD INS PRESET INPUT BALANCE DIAGNOSIS MORE... Select with é or ê then <ENTER> <EXIT> [...]

Service Mode 9-3 R5976336 BARCOSLM R6 Executive 06092001 - Projector Run Time : gives the total run time since the first start up. All projectors leave the factory with a run time of approximately 24 hours. - Projector Serial number : indicates the fabrication number of the projector. This number can be useful when calling for tech nical assistance[...]

Service Mode 9-4 R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP MORE... menu 1 menu 2 How to change the password ? To change the password for all the levels can be done as follow (only when o[...]

Service Mode 9-5 R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP MORE... Select with é or ê then <ENTER> <EXIT> to return. Change Projector Address How to change that address ? 1[...]

Service Mode 9-6 R5976336 BARCOSLM R6 Executive 06092001 Setting up the Baud rate To change the baud rate, handle as follow : 1 Push the cursor key é or ê to highlight 'Baudrate' (menu 1). The actual baud rate will be displayed. 2 Press ENTER to toggle between the available baudrates. Default : 9600 Select with é or ê then <ENTER&g[...]

Service Mode 9-7 R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. Select with é or ê <ENTER> to toggle <EXIT> to return. LAMP Constant light output [YES] Serial number : R101111 Article number : R9840740 Run time : 10 hours Remaining run time : 490 hours Number of strikes : 10 Z-A[...]

Service Mode 9-8 R5976336 BARCOSLM R6 Executive 06092001 Available settings. STATUS [ON/OFF] ON : BARCO logo will be displayed on the screen. OFF : No BARCO logo displayed on the screen. BACKGROUND [ON/OFF] ON : BARCO logo will be displayed on a black background. OFF : BARCO logo will be displayed without any background. SHIFT By pushing the contro[...]

Service Mode 9-9 R5976336 BARCOSLM R6 Executive 06092001 Select with é or ê then <ENTER> <EXIT> to return. WARNING PRESET INPUT BALANCE is reserved to qualified service personnel <ENTER> to accept <EXIT> to return. menu 2 Select with é or ê then <ENTER> <EXIT> to return. menu 1 SERVICE BARCO LOGO ADD-INS PRES[...]

Service Mode 9-10 R5976336 BARCOSLM R6 Executive 06092001 I2C DIAGNOSIS DCA DECODER 1 2H # # # MOTOR DRIVER 1A H # # # LIGHT SENSOR 1C H # # # LAMP DRIVER 2 0 H # # # POWER SUPPLY 30 H # # # FORMATTER 34H # # # PMP 4A H # # # INPUT SELECTOR 72 H # # # INPUT SELECTOR 98 H # # # INPUT SELECTOR 9A H # # # LAMP MODULE A 0 H # # # Scroll with é or ê &[...]

Programmable Function Keys 10-1 R5976336 BARCOSLM R6 Executive 06092001 10 PROGRAMMABLE FUNCTION KEYS Programmable Function Keys What can be done with these keys The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can a Function Key be programmed ? A functi[...]

Programmable Function Keys 10-2 R5976336 BARCOSLM R6 Executive 06092001[...]

A-1 Appendix A : Standard Source Set Up Files R5976336 BARCOSLM R6 Executive 06092001 A ST ANDARD SOURCE SET UP FILES NAME : NAME OF FILE, CONTAINS THE SETTINGS RESOLUTION : IMAGE RESOLUTION, WHEN FOLLOWED BY ...I MEANS INTERLACED. FVERT HZ : VERTICAL FRAME FRE- QUENCY OF THE SOURCE FHOR KHZ : HORIZONTAL FREQUENCY OF THE SOURCE. FPIX MHZ : PIXEL FR[...]

A-2 Appendix A : Standard Source Set Up Files R5976336 BARCOSLM R6 Executive 06092001 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT HZ KHZ MH Z MAC_POR 640 X 870 74,99 6 68, 846 5 7,280 832 640 918 870 MUSE 1760 X 518I 30,000 33,750 37,125 2047 1760 563 518 VIDEO525 1635 X 239I 29,970 15,734 32,207 2047 1635 263 239 VIDEO625 1635 X 278I 25,00[...]

A-1 Index R5976336 BARCOSLM R6 Executive 06092001 i INDEX Symbols 800 Peripheral 8-2 A Add-Ins 9-8 Adjustment Mode 6-1 Installation Mode 8-1 Random Access Mode 7-1 Service Mode 9-1 S tart up adjustment mode 6-1 Aspect Ratio 7-16 B BARCO logo 9-7 Battery Battery installation 3-7 Blanking 7-15 C Change Language 9-5 Change Password 9-3 Change Projecto[...]

A-2 Index R5976336 BARCOSLM R6 Executive 06092001 Lens formulas 3-5 Lens Packaging 2-2 Quick Lens Adjustment 5-5 M Menu Position 8-9 N No Signal 8-5 Noise Reduction 7-12 O On Screen Color 8-4 Background Color 8-5 Quick On Screen Color change 5-6 P Packaging 2-1 Carton 2-1 unpack 2-1 Way of Packaging 2-1 Password About password T ypes. 9-3 Access Co[...]