Beko WMY 9046 LB2 manual

2820524402/ 25-11-14.(10:06) WMY 9046 LB2 W ashing Machine User’ s Manual Document Number[...]

This product w as manufactured using the la test technology in environmentally friendly conditions.[...]

3 / EN Washing Machine / User’ s Manual 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1.1 Life and property safety u Never place the product on a carpet-covered floor . Electri[...]

4 / EN Washing Machine / User’ s Manual u Do not f orget to close the loading door when leaving the room where the product is located. u store all detergents and additives in a safe place awa y from the reach of the children by closing the cover of the detergent container or sealing the detergent package. 1.3 Electrical safety u If the product ha[...]

5 / EN Washing Machine / User’ s Manual 2 Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials whi[...]

6 / EN Washing Machine / User’ s Manual 4 T echnical specifications Supplier name or trademark Beko Model name WMY 9046 LB2 Rated capacity (kg) 9 Energy efficiency class / Scale from A (Highest Efficiency) to D (Lowest Efficiency) A+++ Maximum spin speed (rpm) 1400 Height (cm) 84 Width (cm) 60 Depth (cm) 60 Net weight (±4 kg.) 75 Single Water in[...]

7 / EN Washing Machine / User’ s Manual 4.1 Installation • Apply to the nearest authorized ser vice agent for the installation of your product. • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility . • Make sure that the water inlet and disc[...]

8 / EN Washing Machine / User’ s Manual 4.1.4 Connecting water supply C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure[...]

9 / EN Washing Machine / User’ s Manual 4.1.6 Adjusting the feet A CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems. CAUTION: Do no[...]

10 / EN Washing Machine / User’ s Manual 4.2 Preparation 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, color , and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags. 4.2.2 Preparing laundry for washing • Laundr y items with metal attachments such as, underwired br[...]

11 / EN Washing Machine / User’ s Manual 4.2.6 Using detergent and softener C When using detergent, softener , starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if available. 1 3 2 The detergent drawer is composed of t[...]

12 / EN Washing Machine / User’ s Manual If the product does not contain a liquid detergent cup: • Do not use liquid detergent for the prewash in a programme with prewash. • Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent. Using gel and[...]

13 / EN Washing Machine / User’ s Manual 4.2.7 Tips for efficient washing Clothes Light Colours and Whites Colours Black/Dark Colours Delicates/ Woolens/Silks (Recommended temperature range based on soiling level: 40-90 o C) (Recommended temperature range based on soiling level: cold -40 o C) (Recommended temperature range based on soiling level:[...]

14 / EN Washing Machine / User’ s Manual 4.3 Operating the product 4.3.1 Control panel 1 - Programme selection knob 2 - T emperature selection LEDs 3 - Spin speed selection LEDs 4 - Duration information display 5 - Child lock enabled LED 6 - End Time Setting button 7 - Door lock enabled LED 8 - Programme follow-up indicator LEDs 9 - On / Off butt[...]

15 / EN Washing Machine / User’ s Manual 4.3.2 Programme selection 1 Determine the programme suitable for the type, quantity and soiling level of the laundr y in accordance with the "Programme and consumption table". 1 Select the desired programme with the “Programme Selection” knob. C Programmes are limited with the highest spin sp[...]

16 / EN Washing Machine / User’ s Manual Indicative values for Synthetics programmes (EN) Load (kg) W ater Consumption (l) Energy Consumption (kWh) Programme Duration (min) * Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** ≤ 1000 rpm > 1000 rpm Synthetics 60 4 65 1.25 105 l /135 l 45 40 Synthetics 40 4 65 0.70 105 l /135 [...]

17 / EN Washing Machine / User’ s Manual 4.3.6 Programme and consumption table • : Selectable. * : Automatically selected, no canceling. ** : Energ y Label programme (AS/NZS 2040) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. **** : Programme detects the type and quantity [...]

18 / EN Washing Machine / User’ s Manual 4.3.7 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will illuminate. C Indicator lights of the auxiliary functions that are not allowed to be selec[...]

19 / EN Washing Machine / User’ s Manual 4.3.8 End Time With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End T ime indicator is illuminated. In order for the End Time function to be activated[...]

20 / EN Washing Machine / User’ s Manual 4.3.11.3 Adding or taking out laundry 1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2. Wait until the Loading Door can be opened. 3. Open the Loading Door and ad[...]

21 / EN Washing Machine / User’ s Manual 4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (ever y 4-5 washing cycles) as shown below in order to prevent accumula[...]

22 / EN Washing Machine / User’ s Manual 4.4.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters [...]

23 / EN Washing Machine / User’ s Manual If the product does not have an emergency water drain hose, in order to drain the water: a. In order to collect the water to flow out of the filter , place a large vessel in front of the filter . b. T urn and loosen the pump filter until wa ter starts to flow (counterclockwise). Fill the flowing water into[...]

24 / EN Washing Machine / User’ s Manual 5 T roubleshooting Problem Reason Solution Program does not start after closing the door . Start / Pause / Cancel button was not pressed.  *Press the Start / Pause / Cancel button. Programme cannot be started or selected. Washing machine has switched to self protection mode due to a supply problem (line[...]

25 / EN Washing Machine / User’ s Manual Problem Reason Solution Programme time does not countdown. (On models with display) (*) Timer may stop during water intake.  Timer indicator will not countdown until the machine takes in adequate amount of water . The machine will wait until there is sufficient amount of water to avoid poor washing resu[...]

26 / EN Washing Machine / User’ s Manual Problem Reason Solution It does not rinse well. The amount, brand and storage conditions of the detergent used are inappropriate.  Use a detergent appropriate for the washing machine and your laundry . Keep detergents closed in an environment free of humidity and do not expose them to excessive temperat[...]

27 / EN Washing Machine / User’ s Manual Problem Reason Solution Laundry remains wet at the end of the programme . (*) Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage.  Use recommended amount of detergent. (*) Machine does not switch to spinning step when the lau[...]