Ir para a página of
Manuais similares
-
Network Router
Billion Modem/Router ADSL BIPAC-7100S
2 páginas 0.01 mb -
Network Router
Billion Firewall VPN DSL/Cable Router with 4-Port Switch TELEWELL TW-640
13 páginas 0.35 mb -
Network Router
Billion BiPAC 7404V(G)OX
168 páginas 0.01 mb -
Network Router
Billion BiPAC 7402W
12 páginas 0.01 mb -
Network Router
Billion (802.11g) ADSL2+ Modem/Router BIPAC 5102S
2 páginas 3.93 mb -
Network Router
Billion 802.11g MIMO ADSL2+ Router BIPAC 7300M
2 páginas 1.78 mb -
Network Router
Billion BIPAC 8501
134 páginas 0.01 mb -
Network Router
Billion BiPAC VGL
14 páginas 0.01 mb
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Billion BiPAC 7800. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoBillion BiPAC 7800 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Billion BiPAC 7800 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Billion BiPAC 7800, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Billion BiPAC 7800 deve conte:
- dados técnicos do dispositivo Billion BiPAC 7800
- nome do fabricante e ano de fabricação do dispositivo Billion BiPAC 7800
- instruções de utilização, regulação e manutenção do dispositivo Billion BiPAC 7800
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Billion BiPAC 7800 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Billion BiPAC 7800 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Billion na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Billion BiPAC 7800, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Billion BiPAC 7800, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Billion BiPAC 7800. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
BiP AC 7800 Dual W AN ADSL2+ Firewall Router User Manual V ersion released 1.01 Last revised date 1 1-1 1-2008[...]
-
Página 2
T able of Contents Chapter 1: Introduction ..................................................................... 1 Introduction to your Router .................................................................. 1 Features ............................................................................................ 2 Chapter 2: Installing the Router .[...]
-
Página 3
WA N .................................................................................................. 41 W AN Prole (ADSL) .......................................................................... 41 W AN Prole – Main Port (EW AN) ......................................................... 47 ADSL Mode .....................................[...]
-
Página 4
Chapter 1: Introduction Introduction to your Router Thank you for purchasing BiP AC 7800 Router . Y our new router is an all-in-one unit that combines an ADSL modem, ADSL2/2+ router and Ethernet network switch to provide everything you need to get the machines on your network connected to the Internet over an ADSL broadband connection. The BiP AC 7[...]
-
Página 5
Features Express Internet Access The router complies with ADSL worldwide standards. It supports downstream rate up to 12/24 Mbps with ADSL2/2+, 8Mbps with ADSL. Users enjoy not only high-speed ADSL services but also broadband multimedia applications such as interactive gaming, video streaming and real-time audio much easier and faster than ever . I[...]
-
Página 6
Domain Name System (DNS) Relay It provides an easy way to map the domain name (a friendly name for users such as www .yahoo. com) and IP address. When a local machine sets its DNS server with this router’s IP address, every DNS conversion request packet from the PC to this router will be forwarded to the real DNS in the outside network. Dynamic D[...]
-
Página 7
Chapter 2: Installing the Router Important note for using this router 4[...]
-
Página 8
Package Contents BiPAC 7800 Dual WAN ADSL2+ Firewall Router CD containing the online manual RJ-11 ADSL/Telephone cable Ethernet (RJ-45) cable Power adapter Quick Start Guide Splitter / Microlter (Optional) 5[...]
-
Página 9
The Front LEDs. LED Meaning 1 Internet Lit red when W AN port fails to get IP address. Flash green when W AN port gets IP address successfully and when data is transmitted. 2 DSL Lit Green when the device is successfully connected to an ADSL DSLAM. (“line sync”). 3 EW AN Lit when connected to a broadband connection device. Lit orange for 10/100[...]
-
Página 10
The Rear Ports Port Meaning 1 Power Switch Power ON/OFF switch. 2 Power Connect it with the supplied power adapter . 3 RESET Press more than 1 second to restore the device to its default mode. 4 Giga Ethernet Connect to a PC or an ofce/home network of 10Mbps, 100Mbps or 1000Mbps using the provided RJ-45 Ethernet cables. 5 EW AN W AN 10/100Mbps E[...]
-
Página 11
Cabling One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front panel of your router is a bank of LEDs. V erify that the LAN Link and ADSL line LEDs are lit. If they are not, verify if you are using the proper cables. Make sure that all devices (e.g. telephones, fax m[...]
-
Página 12
Chapter 3: Basic Installation The router can be congured through your w eb browser . A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista, etc. The product provides an easy and user-friendly interface for conguration. Please check your PC network components. The [...]
-
Página 13
Connecting Y our Router Users will not be able to connect to the internet through EW AN if DSL is already connected to the internet. Only one connection type (EW AN or DSL) is allowed to connect to the internet at one time. ADSL Router Mode Broadband Router Mode 10[...]
-
Página 14
11 Network Conguration Conguring PC in Windows Vista Go to Start. Click on Network. 1. Then click on Network and Sharing 2. Center at the top bar . When the Network and Sharing 3. Center window pops up, select and click on Manage network connec- tions on the left window column. Select the Local Area Connection, 4. and right click the icon to [...]
-
Página 15
12 Select Internet Protocol V ersion 4 5. (TCP/IPv4) then click Properties. In the TCP/IPv4 properties window , 6. select the Obtain an IP address au - tomatically and Obtain DNS Server address automatically radio but- tons. Then click OK to exit the set - ting. Click OK again in the Local Area 7. Connection Properties window to apply the new con?[...]
-
Página 16
13 Conguring PC in Windows XP Go to Start > Control Panel (in Classic 1. View). In the Control Panel, double-click on Network Connections Double-click Local Area Connection. 2. In the Local Area Connection Status 3. window , click Properties. Select Internet Protocol (TCP/IP) and 4. click Properties. Select the Obtain an IP address auto - 5. [...]
-
Página 17
14 Conguring PC in Windows 2000 Go to Start > Settings > Control Panel. 1. In the Control Panel, double-click on Network and Dial-up Connections. Double-click Local Area Connection. 2. In the Local Area Connection Status 3. window click Properties. Select Internet Protocol (TCP/IP) and 4. click Properties. Select the Obtain an IP address a[...]
-
Página 18
15 Conguring PC in Windows 95/98/Me Go to Start > Settings > Control Panel. 1. In the Control Panel, double-click on Network and choose the Conguration tab. Select TCP/IP > NE2000 Compatible, 2. or the name of your Network Interface Card (NIC) in your PC. Select the Obtain an IP address auto - 3. matically radio button. Then select t[...]
-
Página 19
16 Conguring PC in Windows NT4.0 Go to Start > Settings > Control Panel. 1. In the Control Panel, double-click on Network and choose the Protocols tab. Select TCP/IP Protocol and click Prop- 2. erties. Select the Obtain an IP address from 3. a DHCP server radio button and click OK.[...]
-
Página 20
17 Factory Default Settings Before conguring your router , you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ admin ” respectively . Device LAN IP settings IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP sett[...]
-
Página 21
18 Information from your ISP Before conguring this device, you have to check with your ISP (Internet Service Provider) to nd out what kind of service is provided such as DHCP (Obtain an IP Address Automatically , Static IP (Fixed IP Address) or PPPoE. Gather the information as illustrated in the following table and keep it for reference. PPPo[...]
-
Página 22
19 Chapter 4: Conguration Open your web browser , enter the IP address of your router , which by default is 192.168.1.254, and click “Go”, a login window prompt will appear . The default username and password are “admin” and “admin” respectively . Congratulations! Y ou are now successfully logon to the BiP AC 7800 Firewall Router! If[...]
-
Página 23
20 Quick Start Step 1: Select W AN port connect mode from the connect mode drop down menu. There are two types of connect mode to choose from: ADSL or EW AN Step 2: After selecting the connect mode, press Continue to move on to the next conguring page. There are 5 types of connection protocols available under ADSL connect mode while there are 2 [...]
-
Página 24
21 ADSL Connect Mode For ADSL connect mode there are 5 types of connection protocols: PPPoE, PPPoA, IPoA, MPoA and Pure Bridge . PPPoE VPI/VCI: Enter the information provided by your ISP . Username: Enter the username provided by your ISP . Y ou can input up to 256 alphanumeric characters (case sensitive). This is in the format of “username@ispna[...]
-
Página 25
22 PPPoA VPI/VCI: Enter the information provided by your ISP . Username: Enter the username provided by your ISP . Y ou can input up to 256 alphanumeric characters (case sensitive). This is in the format of “username@ispname” instead of simply “username”. Password: Enter the password provided by your ISP . Y ou can input up to 32 alphanumer[...]
-
Página 26
IPoA Connection VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encapsulation mode: Select the encapsulation format. Select the one provided by your ISP . IP Address: IPOA W AN IP address can only set x IP address. Subnet mask: User can change it to others such as 255.255.255.128. T ype the netmask assigned to you by your ISP ([...]
-
Página 27
MPoA Connection VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encapsulation mode: Select the encapsulation format. Select the one provided by your ISP . IP Address: Y our WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to automatically obtain an IP address from your ISP . Subnet Mask: User can change it to o[...]
-
Página 28
EW AN Connect Mode For EW AN connect mode there are 2 types of connection protocols: PPPoE and IPoW . PPPoE connection Username: Enter the username provided by your ISP . Y ou can input up to 256 alphanumeric characters (case sensitive). This is in the format of “username@ispname” instead of simply “username”. Password: Enter the password p[...]
-
Página 29
26 IPoW connection IP Address: Y our WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to automatically obtain an IP address from your ISP . Subnet Mask: User can change it to others such as 255.255.255.128. T ype the netmask assigned to you by your ISP (if given) Default Gateway: Enter the IP address of the default gateway .[...]
-
Página 30
27 Status (Basic Mode)[...]
-
Página 31
28 Coguration (Basic Mode) A W AN (Wide Area Network) is an outside connection to another network or the Internet. There are two items within the W AN section: W AN Prole and ADSL Mode . W AN – Main Port (ADSL) PPPoE Connection (ADSL) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP . VPI/V[...]
-
Página 32
29 PPPoA Connection (ADSL) PPPoA stands for Point to Point Protocol over A TM Adaptation Layer 5 (AAL5). It provides access control and billing functionality in a manner similar to dial-up services using PPP . VPI/VCI: Enter the information provided by your ISP . Username: Enter the username provided by your ISP . Y ou can input up to 256 alphanume[...]
-
Página 33
30 MPoA Connection (ADSL) VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP . IP Address: Y our W AN IP address. Leave the IP address as 0.0.0.0 to enable the device to automatically obtain an IP address from your ISP . Subnet mask: User can change it [...]
-
Página 34
31 IPoA Connections (ADSL) VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP . IP Address: Y our W AN IP address. Leave the IP address as 0.0.0.0 to enable the device to automatically obtain an IP address from your ISP . Subnet mask: User can change it[...]
-
Página 35
32 Pure Bridge Connections (ADSL) VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP .[...]
-
Página 36
33 W AN Prole – Main Port (EW AN) Besides using ADSL to get connected to the Internet, Ethernet port 1 of BiP AC 7800 can be used as an althernative to connect to Cable Modems, VDSL and ber optic lines. This alternative not only provides faster connection to the Internet, it also provides users with more exibility to get online. PPPoE (E[...]
-
Página 37
34 IPoW (IP over Ethernet) IP Address: Y our W AN IP address. Leave the IP address as 0.0.0.0 to enable the device to automatically obtain an IP address from your ISP . Subnet Mask: User can change it to others such as 255.255.255.128. T ype the netmask assigned to you by your ISP (if given). Default Gateway: Enter the IP address of the default gat[...]
-
Página 38
35 Status (Advanced Mode)[...]
-
Página 39
36 ADSL DSP Firmware V ersion: DSP code version. DMT Status: Current DMT Status. Operational Mode: Display the ADSL state when the connect mode is set to AUTO. Upstream: Upstream rate. Downstream: Downstream rate. Noise Margin (Upstream): This shows the noise margin for upstream rate. Noise Margin (Downstream): This shows the noise margin for downs[...]
-
Página 40
37 ARP This table shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful in determining the MAC address of the network interface of your PCs that use the router ’s Firewall – MAC Address Filter function. See the Firewall section of this manual for more information on this feature. IP Address: Shows the IP Addre[...]
-
Página 41
38 System Log Display all the system logs that have been recorded up to the present time.[...]
-
Página 42
39 Conguration (Advanced Mode) LAN A Local Area Network (LAN) is a shared communication system network where many computers are connected. This type of network is area dened and is usually limited to a conned region within a building or just within the same storey of a building. There are 3 items within the LAN section: Ethernet , IP Alias[...]
-
Página 43
40 DHCP Server DHCP allows networked devices to obtain information on the parameter of IP , Netmask, Gateway as well as DNS through the Ethernet Address of the device. If you check the DHCP Relay you must enter the IP address of the DHCP server that assigns an IP address to the DHCP client in the LAN. Use this function only if advised to do so by y[...]
-
Página 44
41 W AN A W AN (Wide Area Network) is a computer network that covers a broad geographical area (eg. Internet) that is used to connect LAN and other types of network systems. There are two items within the W AN section: W AN Prole and ADSL Mode . W AN Prole (ADSL) PPPoE Connection (ADSL) PPPoE (PPP over Ethernet) provides access control in a m[...]
-
Página 45
42 Connection: Always on: If you want the router to establish a PPPoE session during start up and to auto - matically re-establish the PPPoE session when disconnected by the ISP. Idle Timeout: Auto-disconnect the broadband rewall gateway when there is no activity on the line for a predetermined period of time. MTU: Control the maximum Ethernet p[...]
-
Página 46
43 PPPoA Connection (ADSL) PPPoA stands for Point to Point Protocol over A TM Adaptation Layer 5 (AAL5). It provides access control and billing functions in a manner similar to dial-up services using PPP . Description: A given name for the connection. VPI/VCI: Enter the information provided by your ISP . Encapsulation mode: Select the encapsulation[...]
-
Página 47
44 MPoA Connection (ADSL) Description: A user-denable name for this connection. VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP . NA T : The NA T (Network Address T ranslation) feature allows multiple users to access the Internet through a single [...]
-
Página 48
45 IPoA Connections (ADSL) Description: A user-denable name for this connection. VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP . NA T : The NA T (Network Address T ranslation) feature allows multiple users to access the Internet through a single[...]
-
Página 49
46 Pure Bridge Connections (ADSL) Description: A user-denable name for this connection. VPI/VCI: Enter the VPI and VCI information provided by your ISP . Encap. mode: Select the encapsulation format. Select the one provided by your ISP .[...]
-
Página 50
47 W AN Prole – Main Port (EW AN) Besides using ADSL to connect to the Internet, BiP AC 7800 Ethernet port 1 is also an alternative to connect to Cable Modems, VDSL and ber optic lines. This alternative provides users with faster connection & exibility to connect to the Internet. PPPoE (EW AN) Username: Enter the username provided by[...]
-
Página 51
48 MTU: Control the maximum Ethernet packet size your PC will send. IPoW (IP over Ethernet) NA T : The NA T (Network Address T ranslation) feature allows multiple users to access the Internet through a single ISP account by sharing a single IP address. If users on your LAN have their own public IP addresses to access the Internet, NA T function can[...]
-
Página 52
49 ADSL Mode ADSL Mode: There are 2 modes “Annex L” and ”Annex M” that user can select for this connection. Modulator: There are 5 modes “ADSL2”, ”ADSL2+”, “G.Lite:”, “T1.413” and “G.DMT” that user can select for this connection.[...]
-
Página 53
50 System There are ve items within the System section: Time Zone, Firmware Upgrade, Backup/ Restore, Restart and User Management. T ime Zone The router does not have a real time clock on board; instead, it uses the Simple Network T ime Protocol (SNTP) to get the most current time from an SNTP server outside your network. Choose your local time [...]
-
Página 54
51 Backup / Restore These functions allow you to save a backup of the current conguration of your router to a dened location on your PC, or to restore a previously saved conguration. This is useful if you wish to experiment with different settings, knowing that you have a backup in hand in case any mistakes occur . It is advisable that you[...]
-
Página 55
52 Restart There are 2 options for you to choose from before restarting the your 7800 device. Y ou can either choose to restart your device to restore it to the Factory Default Settings or to restart the device with your current settings applied. Restarting your device to Factory Default Setting will be useful especially after you have accidentally[...]
-
Página 56
53 Firewall Packet Filter Packet ltering enables you to congure your router to block specied internal/external users (IP address) from Internet access, or you can disable specic service requests (Port number) to / from the Internet. This conguration program allows you to set up dif ferent lter rules for different users based on th[...]
-
Página 57
54 MAC Filter A MAC (Media Access Control) address is the unique network hardware identier for each PC on your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC Address Filter function, you can congure the network to block specic machines from accessing your LAN. T o lter a specic MAC[...]
-
Página 58
55 V irtual Server Virtual Server allows you to direct incoming trafc from W AN side (identied by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. In TCP and UD[...]
-
Página 59
56 Port Mapping Application: Select the service you wish to congure. Protocol: A protocol is automatically applied when an Application is selected from the listbox or you may select a protocol type which you want. External Port & Internal Port: Enter the public port number & range you wish to congure. Internal IP Address: Enter the IP[...]
-
Página 60
57 DMZ The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP address as the DMZ Host, all incoming packets that do not use a port number which is already used by any other Virtual Server entries will rst be checked by the Firewall and NA T algorithms before it is passed to the DMZ host.[...]
-
Página 61
58 Advanced Static Route Enter the destination network address, subnet mask, gateway AND/OR the available W AN interface, then click “Add” to add a new entry to the routing table. Dynamic DNS The Dynamic DNS function lets you alias a dynamic IP address to a static hostname, so if your ISP does not assign you a static IP address you can still us[...]
-
Página 62
59 VLAN VLAN (Virtual Local Area Network) is a group of devices on different physical LAN segments that can communicate with each other as if they were all on the same physical LAN segment.[...]
-
Página 63
60 Device Management The Device Management advanced conguration settings allow you to control your router ’s security options and device monitoring features. UPnP of fers peer-to-peer network connectivity for PCs and other network devices, along with the feature to control data transfer between devices. UPnP of fers many advantages for users r[...]
-
Página 64
61 Installing UPnP in W indows Example Follow the steps below to install the UPnP in W indows Me. Step 1: Click Start and Control Panel. Double-click Add/Remove Programs. Step 2: Click on the Windows Setup tab and select Communication in the Components selection box. Click Details. Step 3: In the Communications window , select the Universal Plug an[...]
-
Página 65
62 Step 4: Click OK to go back to the Add/Remove Programs Properties window . Click Next. Step 5: Restart the computer when prompted. Follow the steps below to install the UPnP in W indows XP . Step 1: Click Start and Control Panel. Step 2: Double-click Network Connections. Step 3: In the Network Connections window , click Advanced in the main menu[...]
-
Página 66
63 Auto-discover Y our UPnP-enabled Network Device Step 1: Click start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway . Step 2: Right-click the icon and select Properties. Step 3: In the Internet Connection Properties window , click Settings to see the port mappings that were automatically created.[...]
-
Página 67
64 Step 4: Y ou may edit or delete the port mappings or click Add to manually add port mappings. Step 5: Select Show icon in notication area when connected option and click OK. An icon displays in the system tray . Step 6: Double-click on the icon to display your current Internet connection status.[...]
-
Página 68
65 Web Congurator Easy Access With UPnP , you can access web-based conguration for the BiP AC 7800 without rst nding out the IP address of the router . This helps if you do not know the router ’s IP address. Follow the steps below to access web conguration. Step 1: Click Start and then Control Panel. Step 2: Double-click Network Co[...]
-
Página 69
66 IGMP IGMP , known as Internet Group Management Protocol, is used to manage hosts from multicast group. IGMP Proxy: Accepting multicast packet. Default is set to Disable. IGMP Snooping: Allowing switched Ethernet / Wireless to check and make correct forwarding decisions. Default is set to Disable. TR-069 Client Please contact you ISP for the info[...]
-
Página 70
67 Remote Access Remote Access Control: Select Enable to allow management access from remote side (mostly from internet).[...]
-
Página 71
68 Appendix: Product Support & Contact If you come across any problems please contact the dealer from where you purchased your prod- uct. Contact Billion MAC OS is a registered T rademark of Apple Computer , Inc. Windows 98, Windows NT , Windows 2000, Windows Me, Windows XP and Windows Vista are registered T rademarks of Microsoft Corporation. [...]